You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@tajo.apache.org by Christian Schwabe <Ch...@gmx.com> on 2014/10/24 16:39:39 UTC
ZipException for tajo-core-0.9.0.jar while starting worker on slave
Hello guys
I was very happy about it when I got the message that was Tajo 0.9.0 released.
For that reason I hopefully try to test it on Ubuntu 14.04.1 LTSBut of course, how could it be otherwise, I get an ZipException while starting a single worker on the "slave" machine.
I've attached the log and I hope you have another tip that I have not already tried.
So what have I done so far:
-Pulled the latest github repository recompiled with
>> $ mvn clean install -DskipTests -Pdist -Dtar -Dhadoop.version=2.5.1
These binaries run successfully on my Macbook Pro
Now
I copied the same folder by customizing the ./conf/tajo-site.xml and
./conf/tajo-site.xml to the second "slave" machine. But in this case I
get a ZipException. You can see this in the attached log.
Because I had the presumption of the load dependencies for the Macbooks at compile time and could cause problems, I have also re-cloned the gitrepository on the Ubuntu system and recompiled it again. Unfortunately, with the same result. The tajo-core-0.9.0.jar could not be opened. In the next step, I have now downloaded the Binaries from tajo.apache.org, again with the same error.
I've tested it with the following Java-Versions on Ubuntu:
java version "1.7.0_65"
OpenJDK Runtime Environment (IcedTea 2.5.2) (7u65-2.5.2-3~14.04)
OpenJDK 64-Bit Server VM (build 24.65-b04, mixed mode)
AND
java version "1.7.0_72"
Java(TM) SE Runtime Environment (build 1.7.0_72-b14)
Java HotSpot(TM) 64-Bit Server VM (build 24.72-b04, mixed mode)
Do you have any ideas what could cause the error here or can reproduce this even?
P.S.: I know that the TajoMaster not running at the time of start of the TajoWorker on the "slave" machine. This error is to be ignored, because I just wanted to test whether the worker starts.
Best regards,
Chris
Re: ZipException for tajo-core-0.9.0.jar while starting worker on slave
Posted by Christian Schwabe <Ch...@gmx.com>.
Sorry, missed the attachement.
Am 24.10.2014 16:39:39, schrieb Christian Schwabe:
> Hello guys
> I was very happy about it when I got the message that was Tajo 0.9.0 released.
> > For that reason I hopefully try to test it on Ubuntu 14.04.1 LTS
> > But of course, how could it be otherwise, I get an ZipException while starting a single worker on the "slave" machine.
> > I've attached the log > and> > I> > hope you have> > another tip> > that I have not> > already> > tried.
> So what have I> > done so far> :>
> -Pulled> > the> > latest> > github> > repository> > recompiled> > with
> >> $ mvn clean install -DskipTests -Pdist -Dtar -Dhadoop.version=2.5.1
>
> These binaries run successfully on my Macbook Pro
>
> Now
I copied the same folder by customizing the ./conf/tajo-site.xml and
./conf/tajo-site.xml to the second "slave" machine. But in this case I
get a ZipException. You can see this in the attached log.
>
> Because I> > had> > the> > presumption of> > the> > load> > dependencies for> > the> > Macbooks> > at compile time> > and> > could> > cause problems> ,> > I have> > also> > re-> cloned> > the> > gitrepository> > on the Ubuntu> > system> > and> > recompiled> it again.> > Unfortunately, with the> > same> > result> .> > The> > tajo> -core-> 0.9.0.jar> > could not be opened> .> > In the next> > step, I have> > now> > downloaded> > the Binaries> from > tajo.apache.org> , again> > with the same error> .
>
> I've tested it with the following Java-Versions on Ubuntu:
>
> java version "1.7.0_65"
> OpenJDK Runtime Environment (IcedTea 2.5.2) (7u65-2.5.2-3~14.04)
> OpenJDK 64-Bit Server VM (build 24.65-b04, mixed mode)
>
> AND
>
> java version "1.7.0_72"
> Java(TM) SE Runtime Environment (build 1.7.0_72-b14)
> Java HotSpot(TM) 64-Bit Server VM (build 24.72-b04, mixed mode)
>
>
> Do you have any ideas what could cause the error here or can reproduce this even?
>
> P.S.: > I know that> > the> > TajoMaster> > not running> > at the time> > of start of the> > TajoWorker> > on the> > "> slave"> > machine> .> > This error> > is to be ignored> ,> > because I> > just wanted to> > test> > whether> > the> > worker> > starts> .
>
>
> > Best regards,
> > Chris
>
Re: ZipException for tajo-core-0.9.0.jar while starting worker on slave
Posted by Christian Schwabe <Ch...@gmx.com>.
Hello Hyunsik,
thanks for your response.
I have almost thought that this is a specific problem. I have found the cause, but I don't know why this error happened. I came up with the idea of downloading the binaries for Tajo using wget.
This path led to success and then during execution of TajoWorker no more ZipException result.
Best regards,
Chris
Am 28.10.2014 05:58:35, schrieb Hyunsik Choi:
> Hi Chris,
>
> According to my attempt, your situation is not reproducible. Could you
> check the binary again? You can download and extract the tarball file
> again.
>
> Best regards,
> Hyunsik
>
> On Fri, Oct 24, 2014 at 7:39 AM, Christian Schwabe
> <> Christian.Schwabe@gmx.com> > wrote:
> > Hello guys
> >
> > I was very happy about it when I got the message that was Tajo 0.9.0
> > released.
> > For that reason I hopefully try to test it on Ubuntu 14.04.1 LTS
> > But of course, how could it be otherwise, I get an ZipException while
> > starting a single worker on the "slave" machine.
> > I've attached the log and I hope you have another tip that I have not
> > already tried.
> >
> > So what have I done so far:
> > -Pulled the latest github repository recompiled with
> > > > $ mvn clean install -DskipTests -Pdist -Dtar -Dhadoop.version=2.5.1
> > These binaries run successfully on my Macbook Pro
> >
> > Now I copied the same folder by customizing the ./conf/tajo-site.xml and
> > ./conf/tajo-site.xml to the second "slave" machine. But in this case I get a
> > ZipException. You can see this in the attached log.
> >
> > Because I had the presumption of the load dependencies for the Macbooks at
> > compile time and could cause problems, I have also re-cloned the
> > gitrepository on the Ubuntu system and recompiled it again. Unfortunately,
> > with the same result. The tajo-core-0.9.0.jar could not be opened. In the
> > next step, I have now downloaded the Binaries from tajo.apache.org, again
> > with the same error.
> >
> > I've tested it with the following Java-Versions on Ubuntu:
> >
> > java version "1.7.0_65"
> > OpenJDK Runtime Environment (IcedTea 2.5.2) (7u65-2.5.2-3~14.04)
> > OpenJDK 64-Bit Server VM (build 24.65-b04, mixed mode)
> >
> > AND
> >
> > java version "1.7.0_72"
> > Java(TM) SE Runtime Environment (build 1.7.0_72-b14)
> > Java HotSpot(TM) 64-Bit Server VM (build 24.72-b04, mixed mode)
> >
> >
> > Do you have any ideas what could cause the error here or can reproduce this
> > even?
> >
> >
> > P.S.: I know that the TajoMaster not running at the time of start of the
> > TajoWorker on the "slave" machine. This error is to be ignored, because I
> > just wanted to test whether the worker starts.
> >
> > Best regards,
> > Chris
> >
Re: ZipException for tajo-core-0.9.0.jar while starting worker on slave
Posted by Hyunsik Choi <hy...@apache.org>.
Hi Chris,
According to my attempt, your situation is not reproducible. Could you
check the binary again? You can download and extract the tarball file
again.
Best regards,
Hyunsik
On Fri, Oct 24, 2014 at 7:39 AM, Christian Schwabe
<Ch...@gmx.com> wrote:
>
> Hello guys
>
> I was very happy about it when I got the message that was Tajo 0.9.0
> released.
> For that reason I hopefully try to test it on Ubuntu 14.04.1 LTS
> But of course, how could it be otherwise, I get an ZipException while
> starting a single worker on the "slave" machine.
> I've attached the log and I hope you have another tip that I have not
> already tried.
>
> So what have I done so far:
> -Pulled the latest github repository recompiled with
>>> $ mvn clean install -DskipTests -Pdist -Dtar -Dhadoop.version=2.5.1
>
> These binaries run successfully on my Macbook Pro
>
> Now I copied the same folder by customizing the ./conf/tajo-site.xml and
> ./conf/tajo-site.xml to the second "slave" machine. But in this case I get a
> ZipException. You can see this in the attached log.
>
> Because I had the presumption of the load dependencies for the Macbooks at
> compile time and could cause problems, I have also re-cloned the
> gitrepository on the Ubuntu system and recompiled it again. Unfortunately,
> with the same result. The tajo-core-0.9.0.jar could not be opened. In the
> next step, I have now downloaded the Binaries from tajo.apache.org, again
> with the same error.
>
> I've tested it with the following Java-Versions on Ubuntu:
>
> java version "1.7.0_65"
> OpenJDK Runtime Environment (IcedTea 2.5.2) (7u65-2.5.2-3~14.04)
> OpenJDK 64-Bit Server VM (build 24.65-b04, mixed mode)
>
> AND
>
> java version "1.7.0_72"
> Java(TM) SE Runtime Environment (build 1.7.0_72-b14)
> Java HotSpot(TM) 64-Bit Server VM (build 24.72-b04, mixed mode)
>
>
> Do you have any ideas what could cause the error here or can reproduce this
> even?
>
>
> P.S.: I know that the TajoMaster not running at the time of start of the
> TajoWorker on the "slave" machine. This error is to be ignored, because I
> just wanted to test whether the worker starts.
>
> Best regards,
> Chris
>