You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mesos.apache.org by be...@apache.org on 2011/06/05 10:24:01 UTC
svn commit: r1132012 [3/3] - in
/incubator/mesos/trunk/third_party/gtest-1.5.0: Makefile.in aclocal.m4
configure
Modified: incubator/mesos/trunk/third_party/gtest-1.5.0/configure
URL: http://svn.apache.org/viewvc/incubator/mesos/trunk/third_party/gtest-1.5.0/configure?rev=1132012&r1=1132011&r2=1132012&view=diff
==============================================================================
--- incubator/mesos/trunk/third_party/gtest-1.5.0/configure (original)
+++ incubator/mesos/trunk/third_party/gtest-1.5.0/configure Sun Jun 5 08:24:01 2011
@@ -555,22 +555,22 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr
# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
-case X$ECHO in
+case X$lt_ECHO in
X*--fallback-echo)
# Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
;;
esac
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
:
else
# Restart under the correct shell.
@@ -580,9 +580,9 @@ fi
if test "X$1" = X--fallback-echo; then
# used as fallback echo
shift
- cat <<EOF
+ cat <<_LT_EOF
$*
-EOF
+_LT_EOF
exit 0
fi
@@ -590,121 +590,116 @@ fi
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
+if test -z "$lt_ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
fi
fi
fi
fi
-fi
# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
fi
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
exec 7<&0 </dev/null 6>&1
# Name of the host.
@@ -850,6 +845,7 @@ ac_ct_CXX
CXXDEPMODE
am__fastdepCXX_TRUE
am__fastdepCXX_FALSE
+LIBTOOL
build
build_cpu
build_vendor
@@ -861,18 +857,22 @@ host_os
SED
GREP
EGREP
+FGREP
+LD
+DUMPBIN
+ac_ct_DUMPBIN
+NM
LN_S
-ECHO
AR
RANLIB
+lt_ECHO
DSYMUTIL
NMEDIT
+LIPO
+OTOOL
+OTOOL64
CPP
CXXCPP
-F77
-FFLAGS
-ac_ct_F77
-LIBTOOL
PYTHON
HAVE_PYTHON_TRUE
HAVE_PYTHON_FALSE
@@ -897,9 +897,7 @@ CXX
CXXFLAGS
CCC
CPP
-CXXCPP
-F77
-FFLAGS'
+CXXCPP'
# Initialize some variables set by options.
@@ -1490,10 +1488,9 @@ Optional Features:
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
- --with-tags[=TAGS] include additional configurations [automatic]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pthreads use pthreads (default is yes)
Some influential environment variables:
@@ -1508,8 +1505,6 @@ Some influential environment variables:
CXXFLAGS C++ compiler flags
CPP C preprocessor
CXXCPP C++ preprocessor
- F77 Fortran 77 compiler command
- FFLAGS Fortran 77 compiler flags
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
@@ -4008,78 +4003,31 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval=$enable_shared; p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_shared=yes
-fi
+case `pwd` in
+ *\ * | *\ *)
+ { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.2.4'
+macro_revision='1.2976'
+
+
+
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
- enableval=$enable_static; p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_static=yes
-fi
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
- enableval=$enable_fast_install; p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_fast_install=yes
-fi
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
@@ -4165,62 +4113,100 @@ case $host_os in *\ *) host_os=`echo "$h
{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
+if test "${ac_cv_path_SED+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" | sed 99q >conftest.sed
+ $as_unset ac_script || ac_script=
+ # Extract the first word of "sed gsed" to use in msg output
+if test -z "$SED"; then
+set dummy sed gsed; ac_prog_name=$2
+if test "${ac_cv_path_SED+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
+ ac_path_SED_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+ # Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_SED_found && break 3
done
done
+done
+IFS=$as_save_IFS
+
+
fi
-SED=$lt_cv_path_SED
+SED="$ac_cv_path_SED"
+if test -z "$SED"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
+echo "${ECHO_T}$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
-{ echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6; }
{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
@@ -4384,6 +4370,108 @@ echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
EGREP="$ac_cv_path_EGREP"
+{ echo "$as_me:$LINENO: checking for fgrep" >&5
+echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ # Extract the first word of "fgrep" to use in msg output
+if test -z "$FGREP"; then
+set dummy fgrep; ac_prog_name=$2
+if test "${ac_cv_path_FGREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_path_FGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+ # Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_FGREP_found && break 3
+ done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+FGREP="$ac_cv_path_FGREP"
+if test -z "$FGREP"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+echo "${ECHO_T}$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
@@ -4409,9 +4497,9 @@ echo $ECHO_N "checking for ld used by $C
[\\/]* | ?:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
@@ -4491,33 +4579,15 @@ echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6;
with_gnu_ld=$lt_cv_prog_gnu_ld
-{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_ld_reload_flag='-r'
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
+
+
+
+
+
+
+{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; }
if test "${lt_cv_path_NM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4562,857 +4632,697 @@ else
done
IFS="$lt_save_ifs"
done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ : ${lt_cv_path_NM=no}
fi
fi
{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
-{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+echo "${ECHO_T}$DUMPBIN" >&6; }
else
- { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6; }
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
-{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[4-9]*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
-bsdi[45]*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
+ test -n "$ac_ct_DUMPBIN" && break
+done
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
fi
- ;;
+fi
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
fi
- ;;
+fi
+test -z "$NM" && NM=nm
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-interix[3-9]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
- ;;
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
-netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; }
+if test "${lt_cv_nm_interface+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:4767: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:4770: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:4773: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
fi
- ;;
+ rm -r -f conftest*
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+echo "${ECHO_T}$lt_cv_nm_interface" >&6; }
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6; }
+fi
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
- ;;
+# find the maximum length of command line arguments
+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ i=0
+ teststring="ABCD"
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- fi
- ;;
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ cygwin* | mingw*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
;;
- pc)
- lt_cv_deplibs_check_method=pass_all
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
;;
esac
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
fi
-{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-# Allow CC to be a program name with arguments.
-compiler=$CC
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ echo "$as_me:$LINENO: result: $xsi_shell" >&5
+echo "${ECHO_T}$xsi_shell" >&6; }
+
+
+{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+echo "${ECHO_T}$lt_shell_append" >&6; }
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval=$enable_libtool_lock;
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
fi
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 4820 "configure"' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
;;
+esac
+
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- lt_cv_cc_needs_belf=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- lt_cv_cc_needs_belf=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_ld_reload_flag='-r'
fi
-{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
- LD="${LD-ld} -64"
- fi
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
-esac
-need_locks="$enable_libtool_lock"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- done
- ac_cv_prog_CPP=$CPP
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
- # Broken: fails on valid input.
-continue
-fi
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
-rm -f conftest.err conftest.$ac_ext
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
-rm -f conftest.err conftest.$ac_ext
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-int
-main ()
-{
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_header_stdc=no
fi
+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-fi
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-fi
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
-( exit $ac_status )
-ac_cv_header_stdc=no
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AR="ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
fi
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
@@ -5422,503 +5332,161 @@ fi
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
- eval "$as_ac_Header=no"
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
-done
-
-
-for ac_header in dlfcn.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
- ac_header_compiler=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- ac_header_preproc=yes
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## --------------------------------------------------- ##
-## Report this to googletestframework@googlegroups.com ##
-## --------------------------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ STRIP=$ac_ct_STRIP
+ fi
else
- eval "$as_ac_Header=\$ac_header_preproc"
+ STRIP="$ac_cv_prog_STRIP"
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
+test -z "$STRIP" && STRIP=:
-fi
-done
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-if test -z "$CXXCPP"; then
- if test "${ac_cv_prog_CXXCPP+set}" = set; then
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # Double quotes because CXXCPP needs to be expanded
- for CXXCPP in "$CXX -E" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
- # Broken: fails on valid input.
-continue
fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
- done
- ac_cv_prog_CXXCPP=$CXXCPP
fi
- CXXCPP=$ac_cv_prog_CXXCPP
-else
- ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-echo "${ECHO_T}$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-fi
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$F77"; then
- ac_cv_prog_F77="$F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
- { echo "$as_me:$LINENO: result: $F77" >&5
-echo "${ECHO_T}$F77" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$F77" && break
- done
-fi
-if test -z "$F77"; then
- ac_ct_F77=$F77
- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$ac_ct_F77"; then
- ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -5927,7 +5495,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_F77="$ac_prog"
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -5937,21 +5505,17 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
- { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-echo "${ECHO_T}$ac_ct_F77" >&6; }
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
else
{ echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
-
- test -n "$ac_ct_F77" && break
-done
-
- if test "x$ac_ct_F77" = x; then
- F77=""
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -5963,289 +5527,79 @@ whose name does not start with the host
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
- F77=$ac_ct_F77
+ RANLIB=$ac_ct_RANLIB
fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
fi
+test -z "$RANLIB" && RANLIB=:
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-rm -f a.out
-# If we don't use `.F' as extension, the preprocessor is not run on the
-# input file. (Note that this only needs to work for GNU compilers.)
[... 24719 lines stripped ...]