You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@cloudstack.apache.org by se...@apache.org on 2014/06/30 11:46:02 UTC

[4/8] Push tx/config and new pot files in preparation for 4.4 RC

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/multiple_guest_networks.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/multiple_guest_networks.pot b/source/locale/pot/networking/multiple_guest_networks.pot
new file mode 100644
index 0000000..08e100d
--- /dev/null
+++ b/source/locale/pot/networking/multiple_guest_networks.pot
@@ -0,0 +1,312 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/multiple_guest_networks.rst:18
+# cbc2c710bdfe4a52822f6acf8381d1dd
+msgid "Using Multiple Guest Networks"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:20
+# 43824860271641cabc92b4e2fea91b0d
+msgid "In zones that use advanced networking, additional networks for guest traffic may be added at any time after the initial installation. You can also customize the domain name associated with the network by specifying a DNS suffix for each network."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:25
+# e7a7a8ebce174e439d282d7c86c23ffc
+msgid "A VM's networks are defined at VM creation time. A VM cannot add or remove networks after it has been created, although the user can go into the guest and remove the IP address from the NIC on a particular network."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:30
+# c1facfd27f164a849bd7151e92129d58
+msgid "Each VM has just one default network. The virtual router's DHCP reply will set the guest's default gateway as that for the default network. Multiple non-default networks may be added to a guest in addition to the single, required default network. The administrator can control which networks are available as the default network."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:36
+# 008bbd9e609541888208d792dda845fd
+msgid "Additional networks can either be available to all accounts or be assigned to a specific account. Networks that are available to all accounts are zone-wide. Any user with access to the zone can create a VM with access to that network. These zone-wide networks provide little or no isolation between guests.Networks that are assigned to a specific account provide strong isolation."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:45
+# e8b12ba98b314fcca6f8659fdffe0e5a
+msgid "Adding an Additional Guest Network"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:47
+#: ../../networking/multiple_guest_networks.rst:97
+#: ../../networking/multiple_guest_networks.rst:135
+#: ../../networking/multiple_guest_networks.rst:153
+#: ../../networking/multiple_guest_networks.rst:173
+# fc94885acfb44c089b5b955040cda635
+# e90f66fa32fb4ac0bdd48def8833e52d
+# 443695bf438a4240b9c354d9c66f2292
+# dc150422f8d8498e81ccfa11cc7daf5f
+# f4162f2a3af54aee90b80a9efec6523f
+msgid "Log in to the CloudStack UI as an administrator or end user."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:49
+#: ../../networking/multiple_guest_networks.rst:179
+# e9d2f3becfba421592c540e757fe27e8
+# 1e2cad5b28aa4f56bfee80c03c969d5c
+msgid "In the left navigation, choose Network."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:51
+# 4e88ac1dcf2144278c13cac5cf518978
+msgid "Click Add guest network. Provide the following information:"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:53
+# 752dce8be6894794b7f10719d33214c9
+msgid "**Name**: The name of the network. This will be user-visible."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:55
+# 68d2d60b814f4b48805d73f511a0c3f4
+msgid "**Display Text**: The description of the network. This will be user-visible."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:58
+# 2e28d86b3670448ea924597e1a6eafbb
+msgid "**Zone**. The name of the zone this network applies to. Each zone is a broadcast domain, and therefore each zone has a different IP range for the guest network. The administrator must configure the IP range for each zone."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:63
+# 783fa5ad4bb94a898e27fb2fb400ce30
+msgid "**Network offering**: If the administrator has configured multiple network offerings, select the one you want to use for this network."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:67
+# e6d0251f520945198846d9589071d11c
+msgid "**Guest Gateway**: The gateway that the guests should use."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:69
+# 82e7d212928549ba947dfe5e04919372
+msgid "**Guest Netmask**: The netmask in use on the subnet the guests will use."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:72
+# 333d9595d92b4dbc9842d746d1dd8448
+msgid "Click Create."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:76
+# cadd27c83ef84c9e9ce49c9ce9e5d8ca
+msgid "Reconfiguring Networks in VMs"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:78
+# 38552d30397849ea975e0b5d28fd31a0
+msgid "CloudStack provides you the ability to move VMs between networks and reconfigure a VM's network. You can remove a VM from a network and add to a new network. You can also change the default network of a virtual machine. With this functionality, hybrid or traditional server loads can be accommodated with ease."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:84
+# 205bea0ed92e4de594873aa8e5ad9d45
+msgid "This feature is supported on XenServer, VMware, and KVM hypervisors."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:88
+# 7d8b8d41cfa04ea0b337a64b1206ae92
+msgid "Prerequisites"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:90
+# bd4145a5e8ae4ca29cd7bdd5b1aab637
+msgid "Ensure that vm-tools are running on guest VMs for adding or removing networks to work on VMware hypervisor."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:95
+# 42b8d9502ed54485bde4210b8fdbb499
+msgid "Adding a Network"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:99
+#: ../../networking/multiple_guest_networks.rst:137
+#: ../../networking/multiple_guest_networks.rst:155
+# c398a820cb1648bc8799135cbaa74b1b
+# d48f631728b44c90be3cb811c9cd0505
+# 37c98038af7f4dc6a120b05e4e13c555
+msgid "In the left navigation, click Instances."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:101
+#: ../../networking/multiple_guest_networks.rst:139
+#: ../../networking/multiple_guest_networks.rst:157
+# b25bff80ed07457f9b1f926c0a58cc6c
+# 39876863e78d47378acdd305a1e22606
+# 2f4e1895d207479597c89b7b137794df
+msgid "Choose the VM that you want to work with."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:103
+#: ../../networking/multiple_guest_networks.rst:141
+#: ../../networking/multiple_guest_networks.rst:159
+# 00b5baacd9084cd580b5fc02a2eb93fb
+# cd7d2fceff8d47d5b392be059b471ab9
+# 3f13993fdab542d6b8318cc2fe353acb
+msgid "Click the NICs tab."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:105
+# 47b1307c53ed41dfbe754e5141219451
+msgid "Click Add network to VM."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:107
+# ebd8002977894bed935a5229f868dc66
+msgid "The Add network to VM dialog is displayed."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:109
+# fa83b310f8904d8587c3dfdc52cacbad
+msgid "In the drop-down list, select the network that you would like to add this VM to."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:112
+# dd48bfa27d7345aa87c6b7e63a358160
+msgid "A new NIC is added for this network. You can view the following details in the NICs page:"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:115
+# 6463c065bc1943008470d1edad582974
+msgid "ID"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:117
+# 9420ad95bce443da9b81765885249155
+msgid "Network Name"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:119
+# f846a9f3d938451198081772cc74cb85
+msgid "Type"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:121
+# 8592916e5acf4e70bafbdbda7c00c614
+msgid "IP Address"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:123
+# c75427419ce04483b71df9bd261c2fbd
+msgid "Gateway"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:125
+# d008ddbc8a054a27ae521d3e3b8a4013
+msgid "Netmask"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:127
+# 41cff6439a0b42b5abab39913bc773bb
+msgid "Is default"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:129
+# cb23bf06693941579c5993219c416bb8
+msgid "CIDR (for IPv6)"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:133
+# bce02b8426584ab693112a2a3eaa69a4
+msgid "Removing a Network"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:143
+# ca1c1c7c1c9d4ff8aaca289a38a6f7c0
+msgid "Locate the NIC you want to remove."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:145
+# 85a4e2e7437642f18635fa647891d856
+msgid "Click Remove NIC button. |remove-nic.png|"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:147
+#: ../../networking/multiple_guest_networks.rst:165
+# ffa7cf9f06374be19a3b64261219cdc1
+# 5597778b6dec4d1fac608939422f4a00
+msgid "Click Yes to confirm."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:151
+# 78a6b76d558e43c18b80b80d9ae29567
+msgid "Selecting the Default Network"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:161
+# d548799e04664a74b122217c8b65678f
+msgid "Locate the NIC you want to work with."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:163
+# 43217c75ff3e4ac885b27d575f4c47ee
+msgid "Click the Set default NIC button. |set-default-nic.png|."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:168
+# fea27f4c1e3f45e89b4b9439c9affb16
+msgid "Changing the Network Offering on a Guest Network"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:170
+# 9de4858c24814a74a54559f2494b3a89
+msgid "A user or administrator can change the network offering that is associated with an existing guest network."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:175
+# 7c551d2e95a241b48be8ce6603506ab3
+msgid "If you are changing from a network offering that uses the CloudStack virtual router to one that uses external devices as network service providers, you must first stop all the VMs on the network."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:181
+# c67df95acd7f48b18f620634af845488
+msgid "Click the name of the network you want to modify."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:183
+# fb679c3a524c4c4a837fe24566e3a12b
+msgid "In the Details tab, click Edit. |edit-icon.png|"
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:185
+# 4afa43a2ac5b46f29ad42d421235b01d
+msgid "In Network Offering, choose the new network offering, then click Apply."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:188
+# 6a7280bbaba74bfb8b6622ac7832cf5c
+msgid "A prompt is displayed asking whether you want to keep the existing CIDR. This is to let you know that if you change the network offering, the CIDR will be affected."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:192
+# 42e2f2150b07464bbdf35bc0c30edd91
+msgid "If you upgrade between virtual router as a provider and an external network device as provider, acknowledge the change of CIDR to continue, so choose Yes."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:196
+# 3b240e38bc11456095069b1622cc917f
+msgid "Wait for the update to complete. Don't try to restart VMs until the network change is complete."
+msgstr ""
+
+#: ../../networking/multiple_guest_networks.rst:199
+# a6db1505b17b48e1ae1063872635e2bb
+msgid "If you stopped any VMs, restart them."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/multiple_ip_ranges.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/multiple_ip_ranges.pot b/source/locale/pot/networking/multiple_ip_ranges.pot
new file mode 100644
index 0000000..652b8ea
--- /dev/null
+++ b/source/locale/pot/networking/multiple_ip_ranges.pot
@@ -0,0 +1,48 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/multiple_ip_ranges.rst:18
+# cea4bcb571304273bc04b67f139f0140
+msgid "About Multiple IP Ranges"
+msgstr ""
+
+#: ../../networking/multiple_ip_ranges.rst:20
+# fb1aec1297a645198cd0ecbc09f187eb
+msgid "The feature can only be implemented on IPv4 addresses."
+msgstr ""
+
+#: ../../networking/multiple_ip_ranges.rst:22
+# 3180ea2f13aa4565a8715d959ef1148d
+msgid "CloudStack provides you with the flexibility to add guest IP ranges from different subnets in Basic zones and security groups-enabled Advanced zones. For security groups-enabled Advanced zones, it implies multiple subnets can be added to the same VLAN. With the addition of this feature, you will be able to add IP address ranges from the same subnet or from a different one when IP address are exhausted. This would in turn allows you to employ higher number of subnets and thus reduce the address management overhead. To support this feature, the capability of ``createVlanIpRange`` API is extended to add IP ranges also from a different subnet."
+msgstr ""
+
+#: ../../networking/multiple_ip_ranges.rst:33
+# d1d9636b0fd14b508f2570b3d7f5b7a2
+msgid "Ensure that you manually configure the gateway of the new subnet before adding the IP range. Note that CloudStack supports only one gateway for a subnet; overlapping subnets are not currently supported."
+msgstr ""
+
+#: ../../networking/multiple_ip_ranges.rst:37
+# b1ed3bd81dfa4662bcf9ab17817d99e5
+msgid "Use the ``deleteVlanRange`` API to delete IP ranges. This operation fails if an IP from the remove range is in use. If the remove range contains the IP address on which the DHCP server is running, CloudStack acquires a new IP from the same subnet. If no IP is available in the subnet, the remove operation fails."
+msgstr ""
+
+#: ../../networking/multiple_ip_ranges.rst:43
+# 5c66e6ebd5cc42728bccf16a99764a94
+msgid "This feature is supported on KVM, xenServer, and VMware hypervisors."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/multiple_ips_on_single_nic.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/multiple_ips_on_single_nic.pot b/source/locale/pot/networking/multiple_ips_on_single_nic.pot
new file mode 100644
index 0000000..5073f76
--- /dev/null
+++ b/source/locale/pot/networking/multiple_ips_on_single_nic.pot
@@ -0,0 +1,128 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/multiple_ips_on_single_nic.rst:18
+# 80e46ffc92914befa1e1b6bb37ae48e0
+msgid "Configuring Multiple IP Addresses on a Single NIC"
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:20
+# e552e4b860e64b83bd63e053002d0187
+msgid "CloudStack provides you the ability to associate multiple private IP addresses per guest VM NIC. In addition to the primary IP, you can assign additional IPs to the guest VM NIC. This feature is supported on all the network configurations: Basic, Advanced, and VPC. Security Groups, Static NAT and Port forwarding services are supported on these additional IPs."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:27
+# 37ec7f1162de4309afcd34ea7bc9af66
+msgid "As always, you can specify an IP from the guest subnet; if not specified, an IP is automatically picked up from the guest VM subnet. You can view the IPs associated with for each guest VM NICs on the UI. You can apply NAT on these additional guest IPs by using network configuration option in the CloudStack UI. You must specify the NIC to which the IP should be associated."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:34
+# 9a035e888c1245098bf6a6b97754c398
+msgid "This feature is supported on XenServer, KVM, and VMware hypervisors. Note that Basic zone security groups are not supported on VMware."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:39
+# e65e3e62dc4a4301b7c488f06bbe696d
+msgid "Use Cases"
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:41
+# 11ad1c7201dd4368b51c2686f4f6c436
+msgid "Some of the use cases are described below:"
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:43
+# bad26d93f70a454ea65fe8d314c5fb5f
+msgid "Network devices, such as firewalls and load balancers, generally work best when they have access to multiple IP addresses on the network interface."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:47
+# 95be93b5a22541cf8e3a65154ae683cc
+msgid "Moving private IP addresses between interfaces or instances. Applications that are bound to specific IP addresses can be moved between instances."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:51
+# 9ee757e7b88f4aa2a87ccd4771a324d2
+msgid "Hosting multiple SSL Websites on a single instance. You can install multiple SSL certificates on a single instance, each associated with a distinct IP address."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:57
+# 4edd1f589e2e49829a8738af942f1449
+msgid "Guidelines"
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:59
+# 54a52619c6484653a0d95be689657a85
+msgid "To prevent IP conflict, configure different subnets when multiple networks are connected to the same VM."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:64
+# 2e55027ec0ce4ce6b87130453ca2ea69
+msgid "Assigning Additional IPs to a VM"
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:66
+# 24aaa9f9fd734b1d9b775ad1342d31b2
+msgid "Log in to the CloudStack UI."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:68
+# 51fd921471ee488bb728f102e439c19e
+msgid "In the left navigation bar, click Instances."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:70
+# f0efc1c51c2a471498620eb3d6313aa6
+msgid "Click the name of the instance you want to work with."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:72
+# 17a62e09249f4a3fac5b78b1ee42aa11
+msgid "In the Details tab, click NICs."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:74
+# 815af55e9e6e475ea2139c0ee79838c8
+msgid "Click View Secondary IPs."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:76
+# edd4eb38ff964d91901201733864317e
+msgid "Click Acquire New Secondary IP, and click Yes in the confirmation dialog."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:79
+# a243effbef704447bf0f0a2d5bdc0a86
+msgid "You need to configure the IP on the guest VM NIC manually. CloudStack will not automatically configure the acquired IP address on the VM. Ensure that the IP address configuration persist on VM reboot."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:83
+# 92b50e481e5943af8db0036e562bcf45
+msgid "Within a few moments, the new IP address should appear with the state Allocated. You can now use the IP address in Port Forwarding or StaticNAT rules."
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:89
+# 8ce45ae597644592be9f68b1b9a50693
+msgid "Port Forwarding and StaticNAT Services Changes"
+msgstr ""
+
+#: ../../networking/multiple_ips_on_single_nic.rst:91
+# 707c305e2e104709866aebe9741b3891
+msgid "Because multiple IPs can be associated per NIC, you are allowed to select a desired IP for the Port Forwarding and StaticNAT services. The default is the primary IP. To enable this functionality, an extra optional parameter 'vmguestip' is added to the Port forwarding and StaticNAT APIs (enableStaticNat, createIpForwardingRule) to indicate on what IP address NAT need to be configured. If vmguestip is passed, NAT is configured on the specified private IP of the VM. if not passed, NAT is configured on the primary IP of the VM."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/multiple_subnets_in_shared_network.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/multiple_subnets_in_shared_network.pot b/source/locale/pot/networking/multiple_subnets_in_shared_network.pot
new file mode 100644
index 0000000..fb8c850
--- /dev/null
+++ b/source/locale/pot/networking/multiple_subnets_in_shared_network.pot
@@ -0,0 +1,158 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:18
+# aaae14dc309846cf90268bd429550032
+msgid "Multiple Subnets in Shared Network"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:20
+# e1e0546c06b44b948781bf1b155376b6
+msgid "CloudStack provides you with the flexibility to add guest IP ranges from different subnets in Basic zones and security groups-enabled Advanced zones. For security groups-enabled Advanced zones, it implies multiple subnets can be added to the same VLAN. With the addition of this feature, you will be able to add IP address ranges from the same subnet or from a different one when IP address are exhausted. This would in turn allows you to employ higher number of subnets and thus reduce the address management overhead. You can delete the IP ranges you have added."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:32
+# d651b6e4b73a4c8897943f492f553be4
+msgid "Prerequisites and Guidelines"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:34
+# 321b92f77c9e47b581323b300949d477
+msgid "This feature can only be implemented:"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:36
+# 693a867b887b40c39f9112ee79a514f3
+msgid "on IPv4 addresses"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:38
+# d4bb9088f4ce439bb4aa86f2d6ca1226
+msgid "if virtual router is the DHCP provider"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:40
+# b4bb01b3421b4a26af052b41ef2e9c74
+msgid "on KVM, xenServer, and VMware hypervisors"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:42
+# 3ce0b6127bed4c878204268e02519b5f
+msgid "Manually configure the gateway of the new subnet before adding the IP range."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:45
+# 92e9da161e084fd09cbd7a34e3a8ea59
+msgid "CloudStack supports only one gateway for a subnet; overlapping subnets are not currently supported"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:50
+# 0ccc8eb511c649519820d407c101fb3f
+msgid "Adding Multiple Subnets to a Shared Network"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:52
+# 402388a40d1c4432adf97dcb94bc7e0a
+msgid "Log in to the CloudStack UI as an administrator or end user."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:54
+# c062e6ebc0b74be185c8e192c237a3d8
+msgid "In the left navigation, choose Infrastructure."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:56
+# 9d6f09662ceb452bb8bf26c21696a7ff
+msgid "On Zones, click View More, then click the zone to which you want to work with.."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:59
+# 9a6c131e8dee4829a34a534324f96d6a
+msgid "Click Physical Network."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:61
+# 412cf2ea6b7c4fc9a45dcfabca044210
+msgid "In the Guest node of the diagram, click Configure."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:63
+# 20271a4db3304ebd986eefb0dbe2304b
+msgid "Click Networks."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:65
+# d4d67c51b96a441984f094dad7440b53
+msgid "Select the networks you want to work with."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:67
+# dbda223b46514614bc24a96cbd967579
+msgid "Click View IP Ranges."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:69
+# fd40e95e0dcc4b37ac83ea1764ccd1c5
+msgid "Click Add IP Range."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:71
+# e57818339fdd4bea80a587551ff3bb27
+msgid "The Add IP Range dialog is displayed, as follows:"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:73
+# 1adf38c68dd04551aeded2194d8d3bfb
+msgid "|add-ip-range.png|"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:75
+# 8d5c0e4efe1742f7988a60fe55223d66
+msgid "Specify the following:"
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:77
+# c5bd70e2ab5748e18b8bc2840088a41e
+msgid "All the fields are mandatory."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:79
+# cefcd378eaf44ae5b0c6aaa2809a4fe4
+msgid "**Gateway**: The gateway for the tier you create. Ensure that the gateway is within the Super CIDR range that you specified while creating the VPC, and is not overlapped with the CIDR of any existing tier within the VPC."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:84
+# d63b707e5f374d5d807b5749f9cc44ad
+msgid "**Netmask**: The netmask for the tier you create."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:86
+# f5d499f2a9fa4a859f8563d9b68b29a3
+msgid "For example, if the VPC CIDR is 10.0.0.0/16 and the network tier CIDR is 10.0.1.0/24, the gateway of the tier is 10.0.1.1, and the netmask of the tier is 255.255.255.0."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:90
+# 4aeabf0b77244ea994e1c9a3587421a7
+msgid "**Start IP/ End IP**: A range of IP addresses that are accessible from the Internet and will be allocated to guest VMs. Enter the first and last IP addresses that define a range that CloudStack can assign to guest VMs ."
+msgstr ""
+
+#: ../../networking/multiple_subnets_in_shared_network.rst:95
+# c54dd19ac3fc4b1abe5c8e2ba6021969
+msgid "Click OK."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/networking_in_pod.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/networking_in_pod.pot b/source/locale/pot/networking/networking_in_pod.pot
new file mode 100644
index 0000000..84ad94b
--- /dev/null
+++ b/source/locale/pot/networking/networking_in_pod.pot
@@ -0,0 +1,58 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/networking_in_pod.rst:18
+# 3d0c16ad63444261b9694623c2402727
+msgid "Networking in a Pod"
+msgstr ""
+
+#: ../../networking/networking_in_pod.rst:20
+# 6f94486d31ee45b8a15da0d2a1c080ca
+msgid "The figure below illustrates network setup within a single pod. The hosts are connected to a pod-level switch. At a minimum, the hosts should have one physical uplink to each switch. Bonded NICs are supported as well. The pod-level switch is a pair of redundant gigabit switches with 10 G uplinks."
+msgstr ""
+
+#: ../../networking/networking_in_pod.rst:26
+# d14ee305eeed479b95127d50242ce7f9
+msgid "|networksinglepod.png|"
+msgstr ""
+
+#: ../../networking/networking_in_pod.rst:28
+# 6c63d1a963fe4751bb6a3efcc28ec07b
+msgid "Servers are connected as follows:"
+msgstr ""
+
+#: ../../networking/networking_in_pod.rst:30
+# cab4d0a9b3874148b142ec81b8916ab3
+msgid "Storage devices are connected to only the network that carries management traffic."
+msgstr ""
+
+#: ../../networking/networking_in_pod.rst:33
+# a01f83aa00be44768e404b928746539d
+msgid "Hosts are connected to networks for both management traffic and public traffic."
+msgstr ""
+
+#: ../../networking/networking_in_pod.rst:36
+# 7cc32b192f154001a6b37b93bf141c79
+msgid "Hosts are also connected to one or more networks carrying guest traffic."
+msgstr ""
+
+#: ../../networking/networking_in_pod.rst:39
+# afe45e02d11f436b92bc4752de309aa2
+msgid "We recommend the use of multiple physical Ethernet cards to implement each network interface as well as redundant switch fabric in order to maximize throughput and improve reliability."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/networking_in_zone.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/networking_in_zone.pot b/source/locale/pot/networking/networking_in_zone.pot
new file mode 100644
index 0000000..e18e1cc
--- /dev/null
+++ b/source/locale/pot/networking/networking_in_zone.pot
@@ -0,0 +1,43 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/networking_in_zone.rst:18
+# 3080bd3d63ce42f7970a7e111d5cc46b
+msgid "Networking in a Zone"
+msgstr ""
+
+#: ../../networking/networking_in_zone.rst:20
+# acc145c9dbbb43d0a4e7bcb5cdb804cb
+msgid "The following figure illustrates the network setup within a single zone."
+msgstr ""
+
+#: ../../networking/networking_in_zone.rst:22
+# a22b23e45435457b927cdcd248830e97
+msgid "|networksetupzone.png|"
+msgstr ""
+
+#: ../../networking/networking_in_zone.rst:24
+# 116d5e262cd547858fe9873be74c59da
+msgid "A firewall for management traffic operates in the NAT mode. The network typically is assigned IP addresses in the 192.168.0.0/16 Class B private address space. Each pod is assigned IP addresses in the 192.168.\\*.0/24 Class C private address space."
+msgstr ""
+
+#: ../../networking/networking_in_zone.rst:29
+# 7a1eee0be4da4ed3aa3c0854ab4c2230
+msgid "Each zone has its own set of public IP addresses. Public IP addresses from different zones do not overlap."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/palo_alto_config.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/palo_alto_config.pot b/source/locale/pot/networking/palo_alto_config.pot
new file mode 100644
index 0000000..79798f1
--- /dev/null
+++ b/source/locale/pot/networking/palo_alto_config.pot
@@ -0,0 +1,781 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/palo_alto_config.rst:18
+# f3d9b37c09d84940aa4c2fde3f9acd2a
+msgid "Setup a Palo Alto Networks Firewall"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:22
+# bf6ec115893747b1baf4957e9be35ff4
+msgid "Functionality Provided"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:24
+# c1f3ed83f8394089ab4694fe954e0195
+msgid "This implementation enables the orchestration of a Palo Alto Networks Firewall from within CloudStack UI and API."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:27
+# 4b1340d4e6f74cd39095e06ca20ccbdd
+msgid "**The following features are supported**:"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:29
+# e30f817e0e4d45ff8140a2bf41b86fb3
+msgid "List/Add/Delete Palo Alto Networks service provider"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:31
+# d027f8c0521d4e3c8659c5f89b010dc3
+msgid "List/Add/Delete Palo Alto Networks network service offering"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:33
+# d3c3bd36ca4744d68797f6bda8758efd
+msgid "List/Add/Delete Palo Alto Networks network using the above service offering"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:35
+# d4ba1563cd1a4efb8039895bd0fc4abc
+msgid "Add an instance to a Palo Alto Networks network"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:37
+# 095297003ef84ab4946859b93741650f
+msgid "Source NAT management on network create and delete"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:39
+# 83be5169430e457495da1faa61028b94
+msgid "List/Add/Delete Ingress Firewall rule"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:41
+# 934645096b2041c0892c5827ab0bae62
+msgid "List/Add/Delete Egress Firewall rule (both 'Allow' and 'Deny' default rules supported)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:44
+# b3d40e33e09544e892974a896c1c0f5e
+msgid "List/Add/Delete Port Forwarding rule"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:46
+# 2227e25f9e3e4cf19e34dd0deddbb404
+msgid "List/Add/Delete Static NAT rule"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:48
+# 64c598fbe2d04d368d5f30c35aa7f1d6
+msgid "Apply a Threat Profile to all firewall rules (more details in the Additional Features section)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:51
+# 6843739b321a4d828b6e9b17a9ef0fc8
+msgid "Apply a Log Forwarding profile to all firewall rules (more details in the Additional Features section)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:57
+# 90c46aad0abf4f3c9d84941828556629
+msgid "Initial Palo Alto Networks Firewall Configuration"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:60
+# 3404e87b314644c49c28a53bc5f5e6a0
+msgid "Anatomy of the Palo Alto Networks Firewall"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:62
+# a9c2ce1bfd05437a975c7cb37c0fba62
+msgid "In **'Network > Interfaces'** there is a list of physical interfaces as well as aggregated physical interfaces which are used for managing traffic in and out of the Palo Alto Networks Firewall device."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:66
+# 5ac5b705b6834ded91c030380797cbd2
+msgid "In **'Network > Zones'** there is a list of the different configuration zones.  This implementation will use two zones; a public (defaults to 'untrust') and private (defaults to 'trust') zone."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:70
+# eea4177c1fff4e099f0d3ed3d68ddfca
+msgid "In **'Network > Virtual Routers'** there is a list of VRs which handle traffic routing for the Palo Alto Firewall.  We only use a single Virtual Router on the firewall and it is used to handle all the routing to the next network hop."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:75
+# abd376e7380441f390cd90564d09d4c5
+msgid "In **'Objects > Security Profile Groups'** there is a list of profiles which can be applied to firewall rules.  These profiles are used to better understand the types of traffic that is flowing through your network. Configured when you add the firewall provider to CloudStack."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:80
+# 81bf3163d8e548f9827901650a45fa29
+msgid "In **'Objects > Log Forwarding'** there is a list of profiles which can be applied to firewall rules.  These profiles are used to better track the logs generated by the firewall.  Configured when you add the firewall provider to CloudStack."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:85
+# 3f1feff617394987a3e0e75b9098bdb8
+msgid "In **'Policies > Security'** there is a list of firewall rules that are currently configured.  You will not need to modify this section because it will be completely automated by CloudStack, but you can review the firewall rules which have been created here."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:90
+# 34e8e7a02d1a478d99e352c6a4dd825c
+msgid "In **'Policies > NAT'** there is a list of the different NAT rules.  You will not need to modify this section because it will be completely automated by CloudStack, but you can review the different NAT rules that have been created here.  Source NAT, Static NAT and Destination NAT (Port Forwarding) rules will show up in this list."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:99
+# 640e9e01bf184821b43d47005542f297
+msgid "Configure the Public / Private Zones on the firewall"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:101
+# dd1583c5eff3465b96b6e0e55da67a78
+msgid "No manual configuration is required to setup these zones because CloudStack will configure them automatically when you add the Palo Alto Networks firewall device to CloudStack as a service provider.  This implementation depends on two zones, one for the public side and one for the private side of the firewall."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:107
+# f247dae111a8455598a5509325f99b2d
+msgid "The public zone (defaults to 'untrust') will contain all of the public interfaces and public IPs."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:110
+# 3cc0d8d0cdd949bbae82f501193f7705
+msgid "The private zone (defaults to 'trust') will contain all of the private interfaces and guest network gateways."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:113
+# fffcd92335be420f92a7847a249b200c
+msgid "The NAT and firewall rules will be configured between these zones."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:118
+# 0f85059787c94c61b9cb4b39e5cb52c9
+msgid "Configure the Public / Private Interfaces on the firewall"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:120
+# c8c72310b2744d4caefb5b9575ee6e60
+msgid "This implementation supports standard physical interfaces as well as grouped physical interfaces called aggregated interfaces.  Both standard interfaces and aggregated interfaces are treated the same, so they can be used interchangeably. For this document, we will assume that we are using 'ethernet1/1' as the public interface and 'ethernet1/2' as the private interface.  If aggregated interfaces where used, you would use something like 'ae1' and 'ae2' as the interfaces."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:128
+# 2831a742f496425ba96db130e37c9fdf
+msgid "This implementation requires that the 'Interface Type' be set to 'Layer3' for both the public and private interfaces.  If you want to be able to use the 'Untagged' VLAN tag for public traffic in CloudStack, you will need to enable support for it in the public 'ethernet1/1' interface (details below)."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:133
+# 7c752ebb778a47f5ab20ddd8e7c2c88d
+msgid "**Steps to configure the Public Interface**:"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:135
+#: ../../networking/palo_alto_config.rst:171
+#: ../../networking/palo_alto_config.rst:228
+# 5700c7ece81b43cb98c6727c752735b2
+# e49c5cac5b754c67a068eb76b8f2b016
+# de7a1d67b1d944d9a9282e1481b27948
+msgid "Log into Palo Alto Networks Firewall"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:137
+#: ../../networking/palo_alto_config.rst:230
+# 084f3f60d58341c1bb8a4c5902758909
+# ef024b35b5944a84b02459069f6213a1
+msgid "Navigate to 'Network > Interfaces'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:139
+# f9c2ae1f0de249878828ead2f5703582
+msgid "Click on 'ethernet1/1' (for aggregated ethernet, it will probably be called 'ae1')"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:142
+#: ../../networking/palo_alto_config.rst:155
+# 04a63a60ad414b7e81b979d479bae1fd
+# 04da4ad3a88d4e6cba3ee5b4668f9ee2
+msgid "Select 'Layer3' from the 'Interface Type' list"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:144
+# ff872b1bbd2945db9cce189792e38246
+msgid "Click 'Advanced'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:146
+# 944d68b812d8463a87b69f9d882e8b28
+msgid "Check the 'Untagged Subinterface' check-box"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:148
+#: ../../networking/palo_alto_config.rst:157
+#: ../../networking/palo_alto_config.rst:193
+#: ../../networking/palo_alto_config.rst:195
+#: ../../networking/palo_alto_config.rst:265
+#: ../../networking/palo_alto_config.rst:339
+#: ../../networking/palo_alto_config.rst:388
+#: ../../networking/palo_alto_config.rst:426
+#: ../../networking/palo_alto_config.rst:455
+# 290ce1b89ac441bcbc6691b3a41534a6
+# ac12e64f14884682ba033e7f2177cc9b
+# 8f94cc2074684065a79e57cf90d6ab9a
+# 8a83b222380740918936aca1feee32b9
+# f18ef2d3aeac41389cdfd198b83c5467
+# 95a5afc210324dab8a21ba2da8e6801c
+# d765a343c5f146639728c4ea3493e250
+# 8b7efac976c241fe9f3fa33963361d5a
+# 8a61018dde394d37b9ca3df99d188ee5
+msgid "Click 'OK'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:150
+# 8b5c88e0cc8242a580db731046cce5d3
+msgid "**Steps to configure the Private Interface**:"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:152
+# a94612c3076e4722bd18904180a04114
+msgid "Click on 'ethernet1/2' (for aggregated ethernet, it will probably be called 'ae2')"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:162
+# 0beaed2fa39442e887eaca261cae62d7
+msgid "Configure a Virtual Router on the firewall"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:164
+# 22d2fb39f9f44f928787ed03f4aa558c
+msgid "The Virtual Router on the Palo Alto Networks Firewall is not to be confused with the Virtual Routers that CloudStack provisions.  For this implementation, the Virtual Router on the Palo Alto Networks Firewall will ONLY handle the upstream routing from the Firewall to the next hop."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:169
+# e11103f99e6d45d0bea4183b1cf60c98
+msgid "**Steps to configure the Virtual Router**:"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:173
+# d520996f46e84c8c94ce274dd654f3cb
+msgid "Navigate to 'Network > Virtual Routers'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:175
+# e966f3781b904686b55509eef9892346
+msgid "Select the 'default' Virtual Router or Add a new Virtual Router if there are none in the list"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:178
+# 9cbe5a8debc5407fb6918d33d5b71aab
+msgid "If you added a new Virtual Router, you will need to give it a 'Name'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:180
+# b6a107e3fda3444fbcc24365b6ee33ca
+msgid "Navigate to 'Static Routes > IPv4'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:182
+# 6efcbc75fe144976b8a75a2dd888c615
+msgid "'Add' a new static route"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:184
+# ed78234999764665912475eb992e6395
+msgid "**Name**: next_hop (you can name it anything you want)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:186
+# 47efb66b283043aa89a78ad4c6a87339
+msgid "**Destination**: 0.0.0.0/0 (send all traffic to this route)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:188
+# f9dde0e9e0534954bf1da5b6bf535824
+msgid "**Interface**: ethernet1/1 (or whatever you set your public interface as)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:191
+# 1e8a9818e50544a19445ee39589e5215
+msgid "**Next Hop**: (specify the gateway IP for the next hop in your network)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:200
+# f26446d9a67c4620a0f511145ecfde2b
+msgid "Configure the default Public Subinterface"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:202
+# 7225aebfeb604bd7ad6ffa6bd19425c3
+msgid "The current implementation of the Palo Alto Networks firewall integration uses CIDRs in the form of 'w.x.y.z/32' for the public IP addresses that CloudStack provisions.  Because no broadcast or gateway IPs are in this single IP range, there is no way for the firewall to route the traffic for these IPs.  To route the traffic for these IPs, we create a single subinterface on the public interface with an IP and a CIDR which encapsulates the CloudStack public IP range.  This IP will need to be inside the subnet defined by the CloudStack public range netmask, but outside the CloudStack public IP range.  The CIDR should reflect the same subnet defined by the CloudStack public range netmask. The name of the subinterface is determined by the VLAN configured for the public range in CloudStack."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:214
+# 3c781eec6bac4e599027b694351c3cd4
+msgid "To clarify this concept, we will use the following example."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:216
+# 9637f4b7396f4c51983c5bf87b43e912
+msgid "**Example CloudStack Public Range Configuration**:"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:218
+# 8a3070e081974ca68cc0375eca88007b
+msgid "**Gateway**: 172.30.0.1"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:220
+# 9f64613849464823b633f1d16645d42e
+msgid "**Netmask**: 255.255.255.0"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:222
+# 9330fe95cfaf44abbdb0d4f38e739dde
+msgid "**IP Range**: 172.30.0.100 - 172.30.0.199"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:224
+# 435b6fb99438485f877a6756893298bf
+msgid "**VLAN**: Untagged"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:226
+# eb956dfff226492fa1b0806cbbf743dc
+msgid "**Configure the Public Subinterface**:"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:232
+# 2c3eb0c3c7e642cbb78583a57bc43be3
+msgid "Select the 'ethernet1/1' line (not clicking on the name)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:234
+# 739221cdf0024efc9b93b1d76646825b
+msgid "Click 'Add Subinterface' at the bottom of the window"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:236
+# 6b8490f4a2684ca8ad9814a1461edaaa
+msgid "Enter 'Interface Name': 'ethernet1/1' . '9999'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:238
+# fb030c9c7b044a0185fe843def4a3bb5
+msgid "9999 is used if the CloudStack public range VLAN is 'Untagged'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:240
+# 912e1187e17b414f9493ddb7f368b068
+msgid "If the CloudStack public range VLAN is tagged (eg: 333), then the name will reflect that tag"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:243
+# 4472ddfa3e6f4c878a16d411cc343a7d
+msgid "The 'Tag' is the VLAN tag that the traffic is sent to the next hop with, so set it accordingly.  If you are passing 'Untagged' traffic from CloudStack to your next hop, leave it blank.  If you want to pass tagged traffic from CloudStack, specify the tag."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:248
+# f1ede2abd59c4fcc914acf233aa4b38c
+msgid "Select 'default' from the 'Config > Virtual Router' drop-down (assuming that is what your virtual router is called)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:251
+# 0d7f8743ae7e405c833390569c1a342c
+msgid "Click the 'IPv4' tab"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:253
+# 93bc9ae7b5f346f99a40644725c2ebc0
+msgid "Select 'Static' from the 'Type' radio options"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:255
+# 661bc9fb00f342d58bfd39624ff5f72a
+msgid "Click 'Add' in the 'IP' section"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:257
+# b3482058794d4e2abb1e0a1f41bee8fa
+msgid "Enter '172.30.0.254/24' in the new line"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:259
+# 02e03b2878504ed9a7ee888b36978cd4
+msgid "The IP can be any IP outside the CloudStack public IP range, but inside the CloudStack public range netmask (it can NOT be the gateway IP)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:262
+# 925fe2a4b10d4cb1ab438e2de318af0a
+msgid "The subnet defined by the CIDR should match the CloudStack public range netmask"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:269
+# 10d6dd9ed3af49ffad4020de805389de
+msgid "Commit configuration on the Palo Alto Networks Firewall"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:271
+# 89ac6f1b3c694a06b75008f8eec59b16
+msgid "In order for all the changes we just made to take effect, we need to commit the changes."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:274
+# 3137cac6d6e14fc9904a5fa154e3905d
+msgid "Click the 'Commit' link in the top right corner of the window"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:276
+# f3aaf9f819ef410fba6edbc621ea6a4d
+msgid "Click 'OK' in the commit window overlay"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:278
+# 3b4acc9911434ddc83362cedcacab668
+msgid "Click 'Close' to the resulting commit status window after the commit finishes"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:284
+# 6bb86113a96547538dbfd01db7c9e7ae
+msgid "Setup the Palo Alto Networks Firewall in CloudStack"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:287
+# b8515e0d94ef4d4a865f64f7bef85482
+msgid "Add the Palo Alto Networks Firewall as a Service Provider"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:289
+# 9b19a32893484d2fac28f3558f2643b5
+msgid "Navigate to 'Infrastructure > Zones > ZONE_NAME > Physical Network > NETWORK_NAME (guest) > Configure; Network Service Providers'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:292
+# 9bdf06473baa43cd9c6b8cb17a6313c3
+msgid "Click on 'Palo Alto' in the list"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:294
+# 8565a2ab22994798a9167083879136f7
+msgid "Click 'View Devices'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:296
+# d10162d1e53c40e6bd448e05bb8a3259
+msgid "Click 'Add Palo Alto Device'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:298
+# c6fcd95bacbf4675951227d95a5737fc
+msgid "Enter your configuration in the overlay.  This example will reflect the details previously used in this guide."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:301
+# 1d34f716f84e4296a01fd3f7afde7356
+msgid "**IP Address**: (the IP of the Palo Alto Networks Firewall)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:303
+# add3b3461b6b48d7b74f94961a7b26e1
+msgid "**Username**: (the admin username for the firewall)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:305
+# 708228ac2edb498f9fd079d05a8a7511
+msgid "**Password**: (the admin password for the firewall)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:307
+# b2a6f266de904ebe94805b3176617484
+msgid "**Type**: Palo Alto Firewall"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:309
+# 1cc218519592430f98cc8e009d0c8f2c
+msgid "**Public Interface**: ethernet1/1 (use what you setup earlier as the public interface if it is different from my examples)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:312
+# 5f1c1837d4df4e65a7a8abd05abd43ce
+msgid "**Private Interface**: ethernet1/2 (use what you setup earlier as the private interface if it is different from my examples)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:315
+# dd40b4143070449bb34ede04b3fe467e
+msgid "**Number of Retries**: 2 (the default is fine)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:317
+# 1d8080f41f894087b6e0a8c4c934dfe9
+msgid "**Timeout**: 300 (the default is fine)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:319
+# 876888b0168e496a897f306b246db971
+msgid "**Public Network**: untrust (this is the public zone on the firewall and did not need to be configured)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:322
+# 920274e528a341fb8962b73ff4b77179
+msgid "**Private Network**: trust (this is the private zone on the firewall and did not need to be configured)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:325
+# 2072277d3e14495aa762454838f72995
+msgid "**Virtual Router**: default (this is the name of the Virtual Router we setup on the firewall)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:328
+# 0376444c2cbd4404ad01b614aac5c07f
+msgid "**Palo Alto Threat Profile**: (not required.  name of the 'Security Profile Groups' to apply.  more details in the 'Additional Features' section)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:332
+# e649ac1802774500b5003c708987fe74
+msgid "**Palo Alto Log Profile**: (not required.  name of the 'Log Forwarding' profile to apply.  more details in the 'Additional Features' section)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:335
+# 32094fb7d72248d28b8f84e1fd56e988
+msgid "**Capacity**: (not required)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:337
+# 7e33721fb17a48e2ab7aa2d1b1dc460c
+msgid "**Dedicated**: (not required)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:341
+# dbef98d732fc4f7fbbad776d1b61f41e
+msgid "Click on 'Palo Alto' in the breadcrumbs to go back one screen."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:343
+# e499e22a30754ab4acfd6a779b03ea97
+msgid "Click on 'Enable Provider' |EnableDisableFeature.png|"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:347
+# b7b0fa1a4629430b839286b55162f882
+msgid "Add a Network Service Offering to use the new Provider"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:349
+# 1cc4ca671df7479c96ab873e7ae0cc68
+msgid "There are 6 'Supported Services' that need to be configured in the network service offering for this functionality.  They are DHCP, DNS, Firewall, Source NAT, Static NAT and Port Forwarding.  For the other settings, there are probably additional configurations which will work, but I will just document a common case."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:355
+# f406f98a91684fd1bd4947a0b06ed1a2
+msgid "Navigate to 'Service Offerings'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:357
+# 942ee3b426ba4d88acfbee186446dcaf
+msgid "In the drop-down at the top, select 'Network Offerings'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:359
+# 6d216de0290941758439b72593f8a6c8
+msgid "Click 'Add Network Offering'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:361
+# da673cd57e5d4dadaaa406cb5fa5ec13
+msgid "**Name**: (name it whatever you want)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:363
+# a59e3d821172494d9efb8de1253d352d
+msgid "**Description**: (again, can be whatever you want)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:365
+# bdb32fa4fdf545d2886707aa7ca1156d
+msgid "**Guest Type**: Isolated"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:367
+# ee73168cca234bf08581ec3131ec5bb8
+msgid "**Supported Services**:"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:369
+# 320e8c3f0b9b49ac8768926d267e94d7
+msgid "**DHCP**: Provided by 'VirtualRouter'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:371
+# 4c6b47d1b7b34586863177a90b865d85
+msgid "**DNS**: Provided by 'VirtualRouter'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:373
+# 56ac8260b8a3496ca38997dfc58dae3f
+msgid "**Firewall**: Provided by 'PaloAlto'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:375
+# fb63dd0553724890988f01e52cc9fb1a
+msgid "**Source NAT**: Provided by 'PaloAlto'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:377
+# 4cdf39f3041d47699f285f61fcf0ac95
+msgid "**Static NAT**: Provided by 'PaloAlto'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:379
+# bfbb888f85ab4e179965cac8c6d8dadb
+msgid "**Port Forwarding**: Provided by 'PaloAlto'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:381
+# 88e886aff4204f32811dff6e4d8ea019
+msgid "**System Offering for Router**: System Offering For Software Router"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:383
+# 8f0e43a7d0f34b9992263fdfdcfcd2d6
+msgid "**Supported Source NAT Type**: Per account (this is the only supported option)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:386
+# e06e5423d74c4f328eae1e741028734b
+msgid "**Default egress policy**: (both 'Allow' and 'Deny' are supported)"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:390
+# 59c525fe149a425098205f41b21a9cf1
+msgid "Click on the newly created service offering"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:392
+# 44fc81442fe34d68a2728f0ca0a160dc
+msgid "Click 'Enable network offering' |EnableDisableFeature.png|"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:394
+# 934d3259e9bf44c083323e6b2f2aa9bf
+msgid "When adding networks in CloudStack, select this network offering to use the Palo Alto Networks firewall."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:399
+# fae8d19c649e479f99c6b2edd49434eb
+msgid "Additional Features"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:401
+# 9dc0b83948d74e16b3ad351d1210f5b5
+msgid "In addition to the standard functionality exposed by CloudStack, we have added a couple additional features to this implementation.  We did not add any new screens to CloudStack, but we have added a couple fields to the 'Add Palo Alto Service Provider' screen which will add functionality globally for the device."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:408
+# 5af1e576fa7847f7b87eed5fe35e77b8
+msgid "Palo Alto Networks Threat Profile"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:410
+# 9070542c237349599f645efcd8a64128
+msgid "This feature allows you to specify a 'Security Profile Group' to be applied to all of the firewall rules which are created on the Palo Alto Networks firewall device."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:414
+# a4257973d0524640b7102968817ca7e5
+msgid "To create a 'Security Profile Group' on the Palo Alto Networks firewall, do the following:"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:417
+#: ../../networking/palo_alto_config.rst:446
+# 77a31bab19cd4e55b4cc13c92cb328bb
+# 92409a68a6f345c89e059f0a26e707ee
+msgid "Log into the Palo Alto Networks firewall"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:419
+# 2b0227f96b854d92bf96e91d9c17435c
+msgid "Navigate to 'Objects > Security Profile Groups'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:421
+# 2405f37aad834c34b4360f784ce6ec69
+msgid "Click 'Add' at the bottom of the page to add a new group"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:423
+# 7e5ffff8c26545c48b07a4921ca76a52
+msgid "Give the group a Name and specify the profiles you would like to include in the group"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:428
+#: ../../networking/palo_alto_config.rst:457
+# 3e3d4bfaa14c46c38499c68ce4f36095
+# 547b08aaaf164fb68c2b8f1b37d09793
+msgid "Click the 'Commit' link in the top right of the screen and follow the on screen instructions"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:431
+# a31ebe4cd3bf4bf9b7e3fe8d35c32f63
+msgid "Once you have created a profile, you can reference it by Name in the 'Palo Alto Threat Profile' field in the 'Add the Palo Alto Networks Firewall as a Service Provider' step."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:437
+# 735566ed2935434ea67f2e2595c3f686
+msgid "Palo Alto Networks Log Forwarding Profile"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:439
+# c229e4bdb0c04fac952295035d8afa6b
+msgid "This feature allows you to specify a 'Log Forwarding' profile to better manage where the firewall logs are sent to.  This is helpful for keeping track of issues that can arise on the firewall."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:443
+# 461ea8be12674fcd842217cf72c68f7f
+msgid "To create a 'Log Forwarding' profile on the Palo Alto Networks Firewall, do the following:"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:448
+# a61142f77e8941e9b976c01cd1aa9f89
+msgid "Navigate to 'Objects > Log Forwarding'"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:450
+# ea14dff9d3c448f0976b6aebe2d119cc
+msgid "Click 'Add' at the bottom of the page to add a new profile"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:452
+# 1352f9adcbd94a24a5429e2ed53caa48
+msgid "Give the profile a Name and specify the details you want for the traffic and threat settings"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:460
+# 6b304cde8312467ebef3f110a46fce1a
+msgid "Once you have created a profile, you can reference it by Name in the 'Palo Alto Log Profile' field in the 'Add the Palo Alto Networks Firewall as a Service Provider' step."
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:467
+# 7ba0d11bde5b4c3e97de4830b0aecc15
+msgid "Limitations"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:469
+# 796314d492b54823a652a3f50d430629
+msgid "The implementation currently only supports a single public IP range in CloudStack"
+msgstr ""
+
+#: ../../networking/palo_alto_config.rst:472
+# c8e8545461454cb9acf0a06bf42b95c0
+msgid "Usage tracking is not yet implemented"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/persistent_networks.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/persistent_networks.pot b/source/locale/pot/networking/persistent_networks.pot
new file mode 100644
index 0000000..70c77e6
--- /dev/null
+++ b/source/locale/pot/networking/persistent_networks.pot
@@ -0,0 +1,123 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/persistent_networks.rst:18
+# 4083b4f8962d4ce2add5a637beceaf4d
+msgid "Persistent Networks"
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:20
+# 5157cfe530594f5f954a8a8e1525ce10
+msgid "The network that you can provision without having to deploy any VMs on it is called a persistent network. A persistent network can be part of a VPC or a non-VPC environment."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:24
+# 469fa7c5517f4f82b49e9015b0027b0f
+msgid "When you create other types of network, a network is only a database entry until the first VM is created on that network. When the first VM is created, a VLAN ID is assigned and the network is provisioned. Also, when the last VM is destroyed, the VLAN ID is released and the network is no longer available. With the addition of persistent network, you will have the ability to create a network in CloudStack in which physical devices can be deployed without having to run any VMs. Additionally, you can deploy physical devices on that network."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:33
+# 87f88f46858c41ba96f785b7c3122342
+msgid "One of the advantages of having a persistent network is that you can create a VPC with a tier consisting of only physical devices. For example, you might create a VPC for a three-tier application, deploy VMs for Web and Application tier, and use physical machines for the Database tier. Another use case is that if you are providing services by using physical hardware, you can define the network as persistent and therefore even if all its VMs are destroyed the services will not be discontinued."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:44
+# 68622842a6474e23b5b4ace4928a7f02
+msgid "Persistent Network Considerations"
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:46
+# bd289a0ef0dc4ef1b5a6acb8b9ad0c38
+msgid "Persistent network is designed for isolated networks."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:48
+# 10b2b9266df84efcb8fb9002316e3f11
+msgid "All default network offerings are non-persistent."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:50
+# d9e8d354f6bc4b6f8194156ed112a537
+msgid "A network offering cannot be editable because changing it affects the behavior of the existing networks that were created using this network offering."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:54
+# 80b8615033b54141b06d3d7a311809bf
+msgid "When you create a guest network, the network offering that you select defines the network persistence. This in turn depends on whether persistent network is enabled in the selected network offering."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:58
+# 5e5d6fc784af4dec8e15481000f5125f
+msgid "An existing network can be made persistent by changing its network offering to an offering that has the Persistent option enabled. While setting this property, even if the network has no running VMs, the network is provisioned."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:63
+# 30e1aaa119a34adcb9a57e513d705745
+msgid "An existing network can be made non-persistent by changing its network offering to an offering that has the Persistent option disabled. If the network has no running VMs, during the next network garbage collection run the network is shut down."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:68
+# 1fafa4f8c2e8475e984703fe2e4c29ba
+msgid "When the last VM on a network is destroyed, the network garbage collector checks if the network offering associated with the network is persistent, and shuts down the network only if it is non-persistent."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:75
+# 6302571eba5d408687957bd3759816c3
+msgid "Creating a Persistent Guest Network"
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:77
+# c3876e9bd8d449b489101f5ac1bae458
+msgid "To create a persistent network, perform the following:"
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:79
+# 99fe5f5c722844089e5bdbcdadb22fc0
+msgid "Create a network offering with the Persistent option enabled."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:81
+# 16d2470643ab4777a40f35f26a9de70c
+msgid "See `\"Creating a New Network Offering\" <networking.html#creating-a-new-network-offering>`_."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:84
+# 267c8937d18548498e620897ef0e587e
+msgid "Select Network from the left navigation pane."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:86
+# bc4568a29a4149c797c11839057e9538
+msgid "Select the guest network that you want to offer this network service to."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:89
+# ecdb6f1a35444f46acd9620f3305b060
+msgid "Click the Edit button."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:91
+# 5bda22ffd010416cb80b2848179d18fa
+msgid "From the Network Offering drop-down, select the persistent network offering you have just created."
+msgstr ""
+
+#: ../../networking/persistent_networks.rst:94
+# fd7fed942171405cb30c3ea00f4111cb
+msgid "Click OK."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/portable_ips.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/portable_ips.pot b/source/locale/pot/networking/portable_ips.pot
new file mode 100644
index 0000000..32c2dd9
--- /dev/null
+++ b/source/locale/pot/networking/portable_ips.pot
@@ -0,0 +1,210 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/portable_ips.rst:18
+# 0d718ef9845940f3b45f93fdedd55a80
+msgid "Portable IPs"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:21
+# 7dbdc94b3c7148f3a67dd212137b1b78
+msgid "About Portable IP"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:23
+# a4b9041cb1da4c7c9185978b3bd46328
+msgid "Portable IPs in CloudStack are region-level pool of IPs, which are elastic in nature, that can be transferred across geographically separated zones. As an administrator, you can provision a pool of portable public IPs at region level and are available for user consumption. The users can acquire portable IPs if admin has provisioned portable IPs at the region level they are part of. These IPs can be use for any service within an advanced zone. You can also use portable IPs for EIP services in basic zones."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:32
+# 824ded2676d34d4b8d60fd93b08f58c8
+msgid "The salient features of Portable IP are as follows:"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:34
+# 1f57b59fbbbd426b9b2fd6f4dffaa0d2
+msgid "IP is statically allocated"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:36
+# 1759d65d5ed34db283d80b85d56f486a
+msgid "IP need not be associated with a network"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:38
+# 6826b76a9eea4332a6c068382f8b050c
+msgid "IP association is transferable across networks"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:40
+# ae7460bc9900474fbf94402165b9cb7e
+msgid "IP is transferable across both Basic and Advanced zones"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:42
+# 770563314c044da6acca6641fce5f500
+msgid "IP is transferable across VPC, non-VPC isolated and shared networks"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:44
+# ea55d3113555412f8f8a2bbf4f6b0846
+msgid "Portable IP transfer is available only for static NAT."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:48
+# 2ff5ef4c14bb4585a2e7c5c7458d25fe
+msgid "Guidelines"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:50
+# 662d9610efd3460aae2192eea97c7bd6
+msgid "Before transferring to another network, ensure that no network rules (Firewall, Static NAT, Port Forwarding, and so on) exist on that portable IP."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:56
+# d276865047e64a7f9cdddb63ad28d313
+msgid "Configuring Portable IPs"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:58
+#: ../../networking/portable_ips.rst:90
+# b085a9f5f2ce4744b86603f26196b283
+# a28f4db3b1734d3c9f0aa6cada34dab5
+msgid "Log in to the CloudStack UI as an administrator or end user."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:60
+# 2f850a50ddab404d9df06aa0338d6479
+msgid "In the left navigation, click Regions."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:62
+# 316a2bbd2c69469597356b663e5135ba
+msgid "Choose the Regions that you want to work with."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:64
+# c66c2dfa7575447e82396eeff33e1315
+msgid "Click View Portable IP."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:66
+# cd5798170b724d0abe4461ee8779eded
+msgid "Click Portable IP Range."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:68
+# 09d0a8e2201a44acbe61f89c2ebdba6b
+msgid "The Add Portable IP Range window is displayed."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:70
+# 9c9681bfaca543f09522720f86b05c3b
+msgid "Specify the following:"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:72
+# 2832d8a453bf4a27a01dfbe6ade2c252
+msgid "**Start IP/ End IP**: A range of IP addresses that are accessible from the Internet and will be allocated to guest VMs. Enter the first and last IP addresses that define a range that CloudStack can assign to guest VMs."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:77
+# ea589b30c39d429c86fd50fe49515dd7
+msgid "**Gateway**: The gateway in use for the Portable IP addresses you are configuring."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:80
+# 9d8360b75a254007b307c9ba1341550d
+msgid "**Netmask**: The netmask associated with the Portable IP range."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:82
+# 60ed534104ce48fdb9586f72c61b379f
+msgid "**VLAN**: The VLAN that will be used for public traffic."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:84
+# 8615e1020e2747f0ba31cd4cb186a010
+msgid "Click OK."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:88
+# d88ec64c255243049a67ed2616530031
+msgid "Acquiring a Portable IP"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:92
+# b933b6d78fe94153a35b24d2ccfd8e06
+msgid "In the left navigation, choose Network."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:94
+# 2f46ac57574a4ff3833cd3af46386463
+msgid "Click the name of the network where you want to work with."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:96
+# a7dc83315ae746af830094d45cfe7c11
+msgid "Click View IP Addresses."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:98
+# 64b8eac8ac21402293c2fff5d435a7eb
+msgid "Click Acquire New IP."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:100
+# 4a739787a6194df09e032797d1fe0911
+msgid "The Acquire New IP window is displayed."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:102
+# c8424da0e97a443f9d01fab04339184f
+msgid "Specify whether you want cross-zone IP or not."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:104
+# 222f964df0914c01bf92a5a5f461d4cc
+msgid "Click Yes in the confirmation dialog."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:106
+# 97dbf547785f4b1aaea165efca4b50a9
+msgid "Within a few moments, the new IP address should appear with the state Allocated. You can now use the IP address in port forwarding or static NAT rules."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:112
+# b84bba5db56047ba9dcd10cad9a14c3a
+msgid "Transferring Portable IP"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:114
+# f9ff7b7ea0d541a2bb6530a633a01f8b
+msgid "An IP can be transferred from one network to another only if Static NAT is enabled. However, when a portable IP is associated with a network, you can use it for any service in the network."
+msgstr ""
+
+#: ../../networking/portable_ips.rst:118
+# 2112dfc5676e4e7fbeb783e1bdbafb8d
+msgid "To transfer a portable IP across the networks, execute the following API:"
+msgstr ""
+
+#: ../../networking/portable_ips.rst:125
+# 794e73bb89214a29bc9257f2fc58c178
+msgid "Replace the UUID with appropriate UUID. For example, if you want to transfer a portable IP to network X and VM Y in a network, execute the following:"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/fffde327/source/locale/pot/networking/public_ips_and_vlans_for_accounts.pot
----------------------------------------------------------------------
diff --git a/source/locale/pot/networking/public_ips_and_vlans_for_accounts.pot b/source/locale/pot/networking/public_ips_and_vlans_for_accounts.pot
new file mode 100644
index 0000000..2215fed
--- /dev/null
+++ b/source/locale/pot/networking/public_ips_and_vlans_for_accounts.pot
@@ -0,0 +1,261 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) 
+# This file is distributed under the same license as the Apache CloudStack Administration Documentation package.
+# FIRST AUTHOR <EM...@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 11:44+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:18
+# e16ce84ab27a470389c600bd7f1937e6
+msgid "Reserving Public IP Addresses and VLANs for Accounts"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:20
+# d20bf40a65964aee8e9477cfb99a8d76
+msgid "CloudStack provides you the ability to reserve a set of public IP addresses and VLANs exclusively for an account. During zone creation, you can continue defining a set of VLANs and multiple public IP ranges. This feature extends the functionality to enable you to dedicate a fixed set of VLANs and guest IP addresses for a tenant."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:26
+# e0cd381debc1495fa88b0bed963e8b16
+msgid "Note that if an account has consumed all the VLANs and IPs dedicated to it, the account can acquire two more resources from the system. CloudStack provides the root admin with two configuration parameter to modify this default behavior: use.system.public.ips and use.system.guest.vlans. These global parameters enable the root admin to disallow an account from acquiring public IPs and guest VLANs from the system, if the account has dedicated resources and these dedicated resources have all been consumed. Both these configurations are configurable at the account level."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:36
+# baef2538501f4f729cd5b4f69fbbefaa
+msgid "This feature provides you the following capabilities:"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:38
+# 4e16f6283a6e4f389b44d3af88cc4364
+msgid "Reserve a VLAN range and public IP address range from an Advanced zone and assign it to an account"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:41
+# c67672fcea6c4ae69a5c3c7d8fbd6a33
+msgid "Disassociate a VLAN and public IP address range from an account"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:43
+# 8451f0b840ab420cb1589fcc1572e6c0
+msgid "View the number of public IP addresses allocated to an account"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:45
+# 2a183b234d9c44b8b99fa31594f06e38
+msgid "Check whether the required range is available and is conforms to account limits."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:48
+# be8cff382a7748e4a75c68c3f8aa3dd7
+msgid "The maximum IPs per account limit cannot be superseded."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:52
+# 17f5e888607c4537816aa2f2e8b7c363
+msgid "Dedicating IP Address Ranges to an Account"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:54
+# 5409cfc1bd6f4b41bdd23eee4d6b9396
+msgid "Log in to the CloudStack UI as administrator."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:56
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:126
+# b8615267486a44ff8ee964b26529f16d
+# ba51a55851504a869dc0f28d293993ad
+msgid "In the left navigation bar, click Infrastructure."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:58
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:128
+# b1c57a90f0c843c4906f95e699dd7d13
+# 2a38ee721dc8442f850ff993fa52de59
+msgid "In Zones, click View All."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:60
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:130
+# defb870416a14ff0a7ea37bf68b8e890
+# 207025dba9b843299213868bf721e0d2
+msgid "Choose the zone you want to work with."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:62
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:132
+# 04eaa49757a64adf830002153cf8db20
+# cea8888967a844ccbb283c973f4b9482
+msgid "Click the Physical Network tab."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:64
+# fd016a6c74fa4aceb46c592a01f82621
+msgid "In the Public node of the diagram, click Configure."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:66
+# abe4deb76feb40fd9fa6dd1461e1dec3
+msgid "Click the IP Ranges tab."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:68
+# 3686de2bd0e24c578fb64abcd3b86fbc
+msgid "You can either assign an existing IP range to an account, or create a new IP range and assign to an account."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:71
+# 90bc5a3040c541cb95831323867cee7d
+msgid "To assign an existing IP range to an account, perform the following:"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:73
+# 196250a3ddc54abc978d437ea8ba3f96
+msgid "Locate the IP range you want to work with."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:75
+# 0a707d3297ad4ccfa38f80baa7690816
+msgid "Click Add Account |addAccount-icon.png| button."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:77
+# 3aaf2af3bb8f4c9485ae2e0ada7aee73
+msgid "The Add Account dialog is displayed."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:79
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:89
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:107
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:142
+# b99e236f412f4946af47669c8d62396e
+# eedc80b2aa5c4c8696da4d4b51a28179
+# 39b98908344542aeb2e40bdbf9550571
+# f6dc925b4c634b9fa0523254d12380bb
+msgid "Specify the following:"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:81
+# 64e4bf3c9f034ef4adb32087be1bc7aa
+msgid "**Account**: The account to which you want to assign the IP address range."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:84
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:112
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:150
+# d15ca620e8154bf9ad213a256496e6e0
+# 09ac68b8a6f24e84b36a726d6058809b
+# f8da528d9cdd447fb262d7ca5542308f
+msgid "**Domain**: The domain associated with the account."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:86
+# 06d6686b378e4a22a762e94353aee862
+msgid "To create a new IP range and assign an account, perform the following:"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:91
+# dd52a8808d1b44e7ba133f213439d71d
+msgid "**Gateway**"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:93
+# 781ca41349a949cca28101dfea1676d5
+msgid "**Netmask**"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:95
+# 1b745bfb0a6443e1a0f947860308e044
+msgid "**VLAN**"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:97
+# 9526ce220e2941459d408f259d6e9b30
+msgid "**Start IP**"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:99
+# a55c7588b51f4a84afa7fa78fc58ed5e
+msgid "**End IP**"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:101
+# 9282436854274ee485b8c2df6ba7f342
+msgid "**Account**: Perform the following:"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:103
+# 678fa43c9d524b8fbb3ca453d599d6f1
+msgid "Click Account."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:105
+# 58e785cf6c3f4544af852a60e9ff4639
+msgid "The Add Account page is displayed."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:109
+# c1b6c5a339b940b7907cfc3fd14b35d6
+msgid "**Account**: The account to which you want to assign an IP address range."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:115
+# e54b45158ec1469392091a64574cbb55
+msgid "Click OK."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:117
+# cbf3d4473399404684b33c48a92e0148
+msgid "Click Add."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:121
+# 8d933442217c4288b95b7ed71f57b95f
+msgid "Dedicating VLAN Ranges to an Account"
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:123
+# d7e1ce8c0be24d57b606cd1a7b4ac29e
+msgid "After the CloudStack Management Server is installed, log in to the CloudStack UI as administrator."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:134
+# 68317dc975da4182878b75c19ec73b1e
+msgid "In the Guest node of the diagram, click Configure."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:136
+# de0ffdc9f48d4d068a50a53f85c49cea
+msgid "Select the Dedicated VLAN Ranges tab."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:138
+# d7319cdb148746849dba29b0a020ce01
+msgid "Click Dedicate VLAN Range."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:140
+# 6037b47944d9429aad5df0dd7981dace
+msgid "The Dedicate VLAN Range dialog is displayed."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:144
+# 564cf1e324b54969924910efd7c3f00b
+msgid "**VLAN Range**: The VLAN range that you want to assign to an account."
+msgstr ""
+
+#: ../../networking/public_ips_and_vlans_for_accounts.rst:147
+# b2c4b566d49c4a3b99b3268f4e867233
+msgid "**Account**: The account to which you want to assign the selected VLAN range."
+msgstr ""
+