You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@oodt.apache.org by Eva Schlauch <es...@mpifr-bonn.mpg.de> on 2015/04/16 10:45:16 UTC
contacts
Hi guys,
I have now tried several installation procedures of oodt including
virtual box and vagrant oodt. The computing center guys did the same.
All things we tried so far failed with some error messages and I still
feel lost since I cannot even figure out if oodt is what I want or not.
Maybe I should try another way: could you point me to someone who uses
oodt in a similar way that I want to use it so that I can learn from
another user directly? I also feel in the wrong place writing to the
developer mailing list when I am actually a user.
Is there a place to go to or a meeting to attend where I can learn
directly from oodt users?
Best regards, Eva
--
Eva Schlauch
MPI f. Radioastronomie
Auf dem Huegel 69
D-53121 Bonn
Phone - 0228 525 254
eschlauch@mpifr.de
Re: contacts
Posted by "Ramirez, Paul M (398M)" <pa...@jpl.nasa.gov>.
Should have said hopefully simpler and successful =).
--Paul
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul Ramirez, M.S.
Technical Group Supervisor
Computer Science for Data Intensive Applications (398M)
Instrument Software and Science Data Systems Section (398)
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Office: 158-264, Mailstop: 158-242
Email: paul.m.ramirez@jpl.nasa.gov<ma...@jpl.nasa.gov>
Office: 818-354-1015
Cell: 818-395-8194
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On Apr 16, 2015, at 8:47 AM, "Ramirez, Paul M (398M)" <pa...@jpl.nasa.gov>>
wrote:
Eva,
Let's try something different and even simpler. I think there is an issue we may temporarily be able to skate around.
Can you try the steps on this page with one minor augmentation:
https://cwiki.apache.org/confluence/display/OODT/RADiX+Powered+By+OODT
Instead of piping the first command to bash we'll edit the file. Here's the first command:
prompt> curl -s http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/src/main/resources/bin/radix<http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> | bash
So instead:
prompt> curl -s http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/src/main/resources/bin/radix<http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> > radix
Edit radix file and change "-Doodt=0.8.1" to "-Doodt=0.7" and then save and pipe to bash:
prompt> pradix | bash
Then follow the rest of the directions.
HTH,
Paul
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul Ramirez, M.S.
Technical Group Supervisor
Computer Science for Data Intensive Applications (398M)
Instrument Software and Science Data Systems Section (398)
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Office: 158-264, Mailstop: 158-242
Email: paul.m.ramirez@jpl.nasa.gov<ma...@jpl.nasa.gov>
Office: 818-354-1015
Cell: 818-395-8194
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On Apr 16, 2015, at 1:45 AM, Eva Schlauch <es...@mpifr-bonn.mpg.de>> wrote:
Hi guys,
I have now tried several installation procedures of oodt including virtual box and vagrant oodt. The computing center guys did the same. All things we tried so far failed with some error messages and I still feel lost since I cannot even figure out if oodt is what I want or not.
Maybe I should try another way: could you point me to someone who uses oodt in a similar way that I want to use it so that I can learn from another user directly? I also feel in the wrong place writing to the developer mailing list when I am actually a user.
Is there a place to go to or a meeting to attend where I can learn directly from oodt users?
Best regards, Eva
--
Eva Schlauch
MPI f. Radioastronomie
Auf dem Huegel 69
D-53121 Bonn
Phone - 0228 525 254
eschlauch@mpifr.de<ma...@mpifr.de>
Re: contacts
Posted by "Mattmann, Chris A (3980)" <ch...@jpl.nasa.gov>.
+1 sorted and auto ack'ed
Sent from my iPhone
> On Apr 17, 2015, at 5:13 PM, Tom Barber <to...@meteorite.bi> wrote:
>
> I'll buy Eva the beer she's closer to me ; )
> On 18 Apr 2015 00:42, "Mattmann, Chris A (3980)" <
> chris.a.mattmann@jpl.nasa.gov> wrote:
>
>> Thanks Val and Paul - I haven’t had a chance to reply to Eva and
>> I hope this helps her! I’ve been at DARPA all week, but so has
>> PaulR so I guess I have no excuse :)
>>
>> Beers on me when you get it working Eva! You too Val! Paul,
>> well...
>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> Chris Mattmann, Ph.D.
>> Chief Architect
>> Instrument Software and Science Data Systems Section (398)
>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> Office: 168-519, Mailstop: 168-527
>> Email: chris.a.mattmann@nasa.gov
>> WWW: http://sunset.usc.edu/~mattmann/
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> Adjunct Associate Professor, Computer Science Department
>> University of Southern California, Los Angeles, CA 90089 USA
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: <Mallder>, Valerie <Va...@jhuapl.edu>
>> Reply-To: "dev@oodt.apache.org" <de...@oodt.apache.org>
>> Date: Thursday, April 16, 2015 at 12:33 PM
>> To: "dev@oodt.apache.org" <de...@oodt.apache.org>
>> Subject: RE: contacts
>>
>>> Hi Eva,
>>>
>>> Unfortunately, the directions on the website do not account for some of
>>> the show stopping bugs that I ran into with the 0.8 and 0.8.1 radix
>>> archetype. I have something here that lays everything I did to download,
>>> apply some needed patches, build and install and get up and running. It
>>> is written from a very newbie's point of view. So, the experienced folks
>>> may know easier ways to do some of the things that I did. But, this is
>>> what got me up and running. I do not recommend the 0.8.1 archetype
>>> because opsui is not working in that version. I had to go back to 0.8 to
>>> get a working opsui. This write-up assumes 0.8.
>>>
>>> I hope this is helpful. I have been meaning to post something like this
>>> up on the website, but have not had time to polish it up as much as I
>>> would like.
>>>
>>> Val
>>>
>>>
>>>
>>> Valerie A. Mallder
>>> New Horizons Deputy Mission System Engineer
>>> Johns Hopkins University/Applied Physics Laboratory
>>>
>>>
>>>> -----Original Message-----
>>>> From: Ramirez, Paul M (398M) [mailto:paul.m.ramirez@jpl.nasa.gov]
>>>> Sent: Thursday, April 16, 2015 11:47 AM
>>>> To: <de...@oodt.apache.org>
>>>> Subject: Re: contacts
>>>>
>>>> Eva,
>>>>
>>>> Let's try something different and even simpler. I think there is an
>>>> issue we may
>>>> temporarily be able to skate around.
>>>>
>>>> Can you try the steps on this page with one minor augmentation:
>>>>
>>>> https://cwiki.apache.org/confluence/display/OODT/RADiX+Powered+By+OODT
>>>>
>>>> Instead of piping the first command to bash we'll edit the file. Here's
>>>> the first
>>>> command:
>>>>
>>>> prompt> curl -s
>>>> prompt>
>> http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/
>>>> prompt> src/main/resources/bin/radix<
>> http://svn.apache.org/repos/asf/ood
>>>> prompt> t/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> |
>>>> prompt> bash
>>>>
>>>> So instead:
>>>>
>>>> prompt> curl -s
>>>> prompt>
>> http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/
>>>> prompt> src/main/resources/bin/radix<
>> http://svn.apache.org/repos/asf/ood
>>>> prompt> t/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> >
>>>> prompt> radix
>>>>
>>>> Edit radix file and change "-Doodt=0.8.1" to "-Doodt=0.7" and then save
>>>> and pipe
>>>> to bash:
>>>>
>>>> prompt> pradix | bash
>>>>
>>>>
>>>> Then follow the rest of the directions.
>>>>
>>>>
>>>> HTH,
>>>> Paul
>>>>
>>>>
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> Paul Ramirez, M.S.
>>>> Technical Group Supervisor
>>>> Computer Science for Data Intensive Applications (398M) Instrument
>>>> Software and
>>>> Science Data Systems Section (398) NASA Jet Propulsion Laboratory
>>>> Pasadena,
>>>> CA 91109 USA
>>>> Office: 158-264, Mailstop: 158-242
>>>> Email: paul.m.ramirez@jpl.nasa.gov<ma...@jpl.nasa.gov>
>>>> Office: 818-354-1015
>>>> Cell: 818-395-8194
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>
>>>> On Apr 16, 2015, at 1:45 AM, Eva Schlauch <eschlauch@mpifr-
>>>> bonn.mpg.de<ma...@mpifr-bonn.mpg.de>> wrote:
>>>>
>>>> Hi guys,
>>>>
>>>> I have now tried several installation procedures of oodt including
>>>> virtual box and
>>>> vagrant oodt. The computing center guys did the same. All things we
>>>> tried so far
>>>> failed with some error messages and I still feel lost since I cannot
>>>> even figure out if
>>>> oodt is what I want or not.
>>>>
>>>> Maybe I should try another way: could you point me to someone who uses
>>>> oodt in
>>>> a similar way that I want to use it so that I can learn from another
>>>> user directly? I
>>>> also feel in the wrong place writing to the developer mailing list when
>>>> I am actually
>>>> a user.
>>>>
>>>> Is there a place to go to or a meeting to attend where I can learn
>>>> directly from oodt
>>>> users?
>>>>
>>>> Best regards, Eva
>>>>
>>>> --
>>>> Eva Schlauch
>>>> MPI f. Radioastronomie
>>>> Auf dem Huegel 69
>>>> D-53121 Bonn
>>>> Phone - 0228 525 254
>>>> eschlauch@mpifr.de<ma...@mpifr.de>
>>
>>
Re: contacts
Posted by Tom Barber <to...@meteorite.bi>.
I'll buy Eva the beer she's closer to me ; )
On 18 Apr 2015 00:42, "Mattmann, Chris A (3980)" <
chris.a.mattmann@jpl.nasa.gov> wrote:
> Thanks Val and Paul - I haven’t had a chance to reply to Eva and
> I hope this helps her! I’ve been at DARPA all week, but so has
> PaulR so I guess I have no excuse :)
>
> Beers on me when you get it working Eva! You too Val! Paul,
> well...
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Chris Mattmann, Ph.D.
> Chief Architect
> Instrument Software and Science Data Systems Section (398)
> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> Office: 168-519, Mailstop: 168-527
> Email: chris.a.mattmann@nasa.gov
> WWW: http://sunset.usc.edu/~mattmann/
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Adjunct Associate Professor, Computer Science Department
> University of Southern California, Los Angeles, CA 90089 USA
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
>
>
>
>
> -----Original Message-----
> From: <Mallder>, Valerie <Va...@jhuapl.edu>
> Reply-To: "dev@oodt.apache.org" <de...@oodt.apache.org>
> Date: Thursday, April 16, 2015 at 12:33 PM
> To: "dev@oodt.apache.org" <de...@oodt.apache.org>
> Subject: RE: contacts
>
> >Hi Eva,
> >
> >Unfortunately, the directions on the website do not account for some of
> >the show stopping bugs that I ran into with the 0.8 and 0.8.1 radix
> >archetype. I have something here that lays everything I did to download,
> >apply some needed patches, build and install and get up and running. It
> >is written from a very newbie's point of view. So, the experienced folks
> >may know easier ways to do some of the things that I did. But, this is
> >what got me up and running. I do not recommend the 0.8.1 archetype
> >because opsui is not working in that version. I had to go back to 0.8 to
> >get a working opsui. This write-up assumes 0.8.
> >
> >I hope this is helpful. I have been meaning to post something like this
> >up on the website, but have not had time to polish it up as much as I
> >would like.
> >
> >Val
> >
> >
> >
> >Valerie A. Mallder
> >New Horizons Deputy Mission System Engineer
> >Johns Hopkins University/Applied Physics Laboratory
> >
> >
> >> -----Original Message-----
> >> From: Ramirez, Paul M (398M) [mailto:paul.m.ramirez@jpl.nasa.gov]
> >> Sent: Thursday, April 16, 2015 11:47 AM
> >> To: <de...@oodt.apache.org>
> >> Subject: Re: contacts
> >>
> >> Eva,
> >>
> >> Let's try something different and even simpler. I think there is an
> >>issue we may
> >> temporarily be able to skate around.
> >>
> >> Can you try the steps on this page with one minor augmentation:
> >>
> >> https://cwiki.apache.org/confluence/display/OODT/RADiX+Powered+By+OODT
> >>
> >> Instead of piping the first command to bash we'll edit the file. Here's
> >>the first
> >> command:
> >>
> >> prompt> curl -s
> >> prompt>
> http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/
> >> prompt> src/main/resources/bin/radix<
> http://svn.apache.org/repos/asf/ood
> >> prompt> t/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> |
> >> prompt> bash
> >>
> >> So instead:
> >>
> >> prompt> curl -s
> >> prompt>
> http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/
> >> prompt> src/main/resources/bin/radix<
> http://svn.apache.org/repos/asf/ood
> >> prompt> t/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> >
> >> prompt> radix
> >>
> >> Edit radix file and change "-Doodt=0.8.1" to "-Doodt=0.7" and then save
> >>and pipe
> >> to bash:
> >>
> >> prompt> pradix | bash
> >>
> >>
> >> Then follow the rest of the directions.
> >>
> >>
> >> HTH,
> >> Paul
> >>
> >>
> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> Paul Ramirez, M.S.
> >> Technical Group Supervisor
> >> Computer Science for Data Intensive Applications (398M) Instrument
> >>Software and
> >> Science Data Systems Section (398) NASA Jet Propulsion Laboratory
> >>Pasadena,
> >> CA 91109 USA
> >> Office: 158-264, Mailstop: 158-242
> >> Email: paul.m.ramirez@jpl.nasa.gov<ma...@jpl.nasa.gov>
> >> Office: 818-354-1015
> >> Cell: 818-395-8194
> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >>
> >> On Apr 16, 2015, at 1:45 AM, Eva Schlauch <eschlauch@mpifr-
> >> bonn.mpg.de<ma...@mpifr-bonn.mpg.de>> wrote:
> >>
> >> Hi guys,
> >>
> >> I have now tried several installation procedures of oodt including
> >>virtual box and
> >> vagrant oodt. The computing center guys did the same. All things we
> >>tried so far
> >> failed with some error messages and I still feel lost since I cannot
> >>even figure out if
> >> oodt is what I want or not.
> >>
> >> Maybe I should try another way: could you point me to someone who uses
> >>oodt in
> >> a similar way that I want to use it so that I can learn from another
> >>user directly? I
> >> also feel in the wrong place writing to the developer mailing list when
> >>I am actually
> >> a user.
> >>
> >> Is there a place to go to or a meeting to attend where I can learn
> >>directly from oodt
> >> users?
> >>
> >> Best regards, Eva
> >>
> >> --
> >> Eva Schlauch
> >> MPI f. Radioastronomie
> >> Auf dem Huegel 69
> >> D-53121 Bonn
> >> Phone - 0228 525 254
> >> eschlauch@mpifr.de<ma...@mpifr.de>
> >>
> >
>
>
Re: contacts
Posted by "Mattmann, Chris A (3980)" <ch...@jpl.nasa.gov>.
Thanks Val and Paul - I haven’t had a chance to reply to Eva and
I hope this helps her! I’ve been at DARPA all week, but so has
PaulR so I guess I have no excuse :)
Beers on me when you get it working Eva! You too Val! Paul,
well...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Chris Mattmann, Ph.D.
Chief Architect
Instrument Software and Science Data Systems Section (398)
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Office: 168-519, Mailstop: 168-527
Email: chris.a.mattmann@nasa.gov
WWW: http://sunset.usc.edu/~mattmann/
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Adjunct Associate Professor, Computer Science Department
University of Southern California, Los Angeles, CA 90089 USA
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-----Original Message-----
From: <Mallder>, Valerie <Va...@jhuapl.edu>
Reply-To: "dev@oodt.apache.org" <de...@oodt.apache.org>
Date: Thursday, April 16, 2015 at 12:33 PM
To: "dev@oodt.apache.org" <de...@oodt.apache.org>
Subject: RE: contacts
>Hi Eva,
>
>Unfortunately, the directions on the website do not account for some of
>the show stopping bugs that I ran into with the 0.8 and 0.8.1 radix
>archetype. I have something here that lays everything I did to download,
>apply some needed patches, build and install and get up and running. It
>is written from a very newbie's point of view. So, the experienced folks
>may know easier ways to do some of the things that I did. But, this is
>what got me up and running. I do not recommend the 0.8.1 archetype
>because opsui is not working in that version. I had to go back to 0.8 to
>get a working opsui. This write-up assumes 0.8.
>
>I hope this is helpful. I have been meaning to post something like this
>up on the website, but have not had time to polish it up as much as I
>would like.
>
>Val
>
>
>
>Valerie A. Mallder
>New Horizons Deputy Mission System Engineer
>Johns Hopkins University/Applied Physics Laboratory
>
>
>> -----Original Message-----
>> From: Ramirez, Paul M (398M) [mailto:paul.m.ramirez@jpl.nasa.gov]
>> Sent: Thursday, April 16, 2015 11:47 AM
>> To: <de...@oodt.apache.org>
>> Subject: Re: contacts
>>
>> Eva,
>>
>> Let's try something different and even simpler. I think there is an
>>issue we may
>> temporarily be able to skate around.
>>
>> Can you try the steps on this page with one minor augmentation:
>>
>> https://cwiki.apache.org/confluence/display/OODT/RADiX+Powered+By+OODT
>>
>> Instead of piping the first command to bash we'll edit the file. Here's
>>the first
>> command:
>>
>> prompt> curl -s
>> prompt> http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/
>> prompt> src/main/resources/bin/radix<http://svn.apache.org/repos/asf/ood
>> prompt> t/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> |
>> prompt> bash
>>
>> So instead:
>>
>> prompt> curl -s
>> prompt> http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/
>> prompt> src/main/resources/bin/radix<http://svn.apache.org/repos/asf/ood
>> prompt> t/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> >
>> prompt> radix
>>
>> Edit radix file and change "-Doodt=0.8.1" to "-Doodt=0.7" and then save
>>and pipe
>> to bash:
>>
>> prompt> pradix | bash
>>
>>
>> Then follow the rest of the directions.
>>
>>
>> HTH,
>> Paul
>>
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> Paul Ramirez, M.S.
>> Technical Group Supervisor
>> Computer Science for Data Intensive Applications (398M) Instrument
>>Software and
>> Science Data Systems Section (398) NASA Jet Propulsion Laboratory
>>Pasadena,
>> CA 91109 USA
>> Office: 158-264, Mailstop: 158-242
>> Email: paul.m.ramirez@jpl.nasa.gov<ma...@jpl.nasa.gov>
>> Office: 818-354-1015
>> Cell: 818-395-8194
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> On Apr 16, 2015, at 1:45 AM, Eva Schlauch <eschlauch@mpifr-
>> bonn.mpg.de<ma...@mpifr-bonn.mpg.de>> wrote:
>>
>> Hi guys,
>>
>> I have now tried several installation procedures of oodt including
>>virtual box and
>> vagrant oodt. The computing center guys did the same. All things we
>>tried so far
>> failed with some error messages and I still feel lost since I cannot
>>even figure out if
>> oodt is what I want or not.
>>
>> Maybe I should try another way: could you point me to someone who uses
>>oodt in
>> a similar way that I want to use it so that I can learn from another
>>user directly? I
>> also feel in the wrong place writing to the developer mailing list when
>>I am actually
>> a user.
>>
>> Is there a place to go to or a meeting to attend where I can learn
>>directly from oodt
>> users?
>>
>> Best regards, Eva
>>
>> --
>> Eva Schlauch
>> MPI f. Radioastronomie
>> Auf dem Huegel 69
>> D-53121 Bonn
>> Phone - 0228 525 254
>> eschlauch@mpifr.de<ma...@mpifr.de>
>>
>
RE: contacts
Posted by "Mallder, Valerie" <Va...@jhuapl.edu>.
Hi Eva,
Unfortunately, the directions on the website do not account for some of the show stopping bugs that I ran into with the 0.8 and 0.8.1 radix archetype. I have something here that lays everything I did to download, apply some needed patches, build and install and get up and running. It is written from a very newbie's point of view. So, the experienced folks may know easier ways to do some of the things that I did. But, this is what got me up and running. I do not recommend the 0.8.1 archetype because opsui is not working in that version. I had to go back to 0.8 to get a working opsui. This write-up assumes 0.8.
I hope this is helpful. I have been meaning to post something like this up on the website, but have not had time to polish it up as much as I would like.
Val
Valerie A. Mallder
New Horizons Deputy Mission System Engineer
Johns Hopkins University/Applied Physics Laboratory
> -----Original Message-----
> From: Ramirez, Paul M (398M) [mailto:paul.m.ramirez@jpl.nasa.gov]
> Sent: Thursday, April 16, 2015 11:47 AM
> To: <de...@oodt.apache.org>
> Subject: Re: contacts
>
> Eva,
>
> Let's try something different and even simpler. I think there is an issue we may
> temporarily be able to skate around.
>
> Can you try the steps on this page with one minor augmentation:
>
> https://cwiki.apache.org/confluence/display/OODT/RADiX+Powered+By+OODT
>
> Instead of piping the first command to bash we'll edit the file. Here's the first
> command:
>
> prompt> curl -s
> prompt> http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/
> prompt> src/main/resources/bin/radix<http://svn.apache.org/repos/asf/ood
> prompt> t/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> |
> prompt> bash
>
> So instead:
>
> prompt> curl -s
> prompt> http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/
> prompt> src/main/resources/bin/radix<http://svn.apache.org/repos/asf/ood
> prompt> t/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> >
> prompt> radix
>
> Edit radix file and change "-Doodt=0.8.1" to "-Doodt=0.7" and then save and pipe
> to bash:
>
> prompt> pradix | bash
>
>
> Then follow the rest of the directions.
>
>
> HTH,
> Paul
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Paul Ramirez, M.S.
> Technical Group Supervisor
> Computer Science for Data Intensive Applications (398M) Instrument Software and
> Science Data Systems Section (398) NASA Jet Propulsion Laboratory Pasadena,
> CA 91109 USA
> Office: 158-264, Mailstop: 158-242
> Email: paul.m.ramirez@jpl.nasa.gov<ma...@jpl.nasa.gov>
> Office: 818-354-1015
> Cell: 818-395-8194
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> On Apr 16, 2015, at 1:45 AM, Eva Schlauch <eschlauch@mpifr-
> bonn.mpg.de<ma...@mpifr-bonn.mpg.de>> wrote:
>
> Hi guys,
>
> I have now tried several installation procedures of oodt including virtual box and
> vagrant oodt. The computing center guys did the same. All things we tried so far
> failed with some error messages and I still feel lost since I cannot even figure out if
> oodt is what I want or not.
>
> Maybe I should try another way: could you point me to someone who uses oodt in
> a similar way that I want to use it so that I can learn from another user directly? I
> also feel in the wrong place writing to the developer mailing list when I am actually
> a user.
>
> Is there a place to go to or a meeting to attend where I can learn directly from oodt
> users?
>
> Best regards, Eva
>
> --
> Eva Schlauch
> MPI f. Radioastronomie
> Auf dem Huegel 69
> D-53121 Bonn
> Phone - 0228 525 254
> eschlauch@mpifr.de<ma...@mpifr.de>
>
Re: contacts
Posted by "Ramirez, Paul M (398M)" <pa...@jpl.nasa.gov>.
Eva,
Let's try something different and even simpler. I think there is an issue we may temporarily be able to skate around.
Can you try the steps on this page with one minor augmentation:
https://cwiki.apache.org/confluence/display/OODT/RADiX+Powered+By+OODT
Instead of piping the first command to bash we'll edit the file. Here's the first command:
prompt> curl -s http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/src/main/resources/bin/radix<http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> | bash
So instead:
prompt> curl -s http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/src/main/resources/bin/radix<http://svn.apache.org/repos/asf/oodt/trunk/mvn/archetypes/radix/src/main/resources/bin/radix> > radix
Edit radix file and change "-Doodt=0.8.1" to "-Doodt=0.7" and then save and pipe to bash:
prompt> pradix | bash
Then follow the rest of the directions.
HTH,
Paul
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul Ramirez, M.S.
Technical Group Supervisor
Computer Science for Data Intensive Applications (398M)
Instrument Software and Science Data Systems Section (398)
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Office: 158-264, Mailstop: 158-242
Email: paul.m.ramirez@jpl.nasa.gov<ma...@jpl.nasa.gov>
Office: 818-354-1015
Cell: 818-395-8194
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On Apr 16, 2015, at 1:45 AM, Eva Schlauch <es...@mpifr-bonn.mpg.de>> wrote:
Hi guys,
I have now tried several installation procedures of oodt including virtual box and vagrant oodt. The computing center guys did the same. All things we tried so far failed with some error messages and I still feel lost since I cannot even figure out if oodt is what I want or not.
Maybe I should try another way: could you point me to someone who uses oodt in a similar way that I want to use it so that I can learn from another user directly? I also feel in the wrong place writing to the developer mailing list when I am actually a user.
Is there a place to go to or a meeting to attend where I can learn directly from oodt users?
Best regards, Eva
--
Eva Schlauch
MPI f. Radioastronomie
Auf dem Huegel 69
D-53121 Bonn
Phone - 0228 525 254
eschlauch@mpifr.de<ma...@mpifr.de>