[incubator-nuttx] 14/35: arch/arm/src/dm320/dm320_serial.c: Appease nxstyle

[xi...@apache.org]

This is an automated email from the ASF dual-hosted git repository.

xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/incubator-nuttx.git

commit 63320733ccef3eba3bc6af33f0d618a662db1173
Author: YAMAMOTO Takashi <ya...@midokura.com>
AuthorDate: Tue Nov 10 08:42:40 2020 +0900

    arch/arm/src/dm320/dm320_serial.c: Appease nxstyle
---
 arch/arm/src/dm320/dm320_serial.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/arch/arm/src/dm320/dm320_serial.c b/arch/arm/src/dm320/dm320_serial.c
index 4cdcbc3..28181d5 100644
--- a/arch/arm/src/dm320/dm320_serial.c
+++ b/arch/arm/src/dm320/dm320_serial.c
@@ -1,7 +1,8 @@
 /****************************************************************************
  * arch/arm/src/dm320/dm320_serial.c
  *
- *   Copyright (C) 2007-2009, 2012-2013, 2017 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2009, 2012-2013, 2017 Gregory Nutt.
+ *   All rights reserved.
  *   Author: Gregory Nutt <gn...@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -178,7 +179,7 @@ static uart_dev_t g_uart1port =
   {
     .size   = CONFIG_UART1_TXBUFSIZE,
     .buffer = g_uart1txbuffer,
-   },
+  },
   .ops      = &g_uart_ops,
   .priv     = &g_uart1priv,
 };
@@ -212,7 +213,8 @@ static inline uint16_t up_serialin(struct up_dev_s *priv, uint32_t offset)
  * Name: up_serialout
  ****************************************************************************/
 
-static inline void up_serialout(struct up_dev_s *priv, uint32_t offset, uint16_t value)
+static inline void up_serialout(struct up_dev_s *priv, uint32_t offset,
+                                uint16_t value)
 {
   putreg16(value, priv->uartbase + offset);
 }
@@ -410,14 +412,15 @@ static void up_shutdown(struct uart_dev_s *dev)
  * Name: up_attach
  *
  * Description:
- *   Configure the UART to operation in interrupt driven mode.  This method is
- *   called when the serial port is opened.  Normally, this is just after the
+ *   Configure the UART to operation in interrupt driven mode.  This method
+ *   is called when the serial port is opened.  Normally, this is just after
  *   the setup() method is called, however, the serial console may operate in
  *   a non-interrupt driven mode during the boot phase.
  *
- *   RX and TX interrupts are not enabled when by the attach method (unless the
- *   hardware supports multiple levels of interrupt enabling).  The RX and TX
- *   interrupts are not enabled until the txint() and rxint() methods are called.
+ *   RX and TX interrupts are not enabled when by the attach method (unless
+ *   the hardware supports multiple levels of interrupt enabling).  The RX
+ *   and TX interrupts are not enabled until the txint() and rxint() methods
+ *   are called.
  *
  ****************************************************************************/
 
@@ -437,6 +440,7 @@ static int up_attach(struct uart_dev_s *dev)
 
       up_enable_irq(priv->irq);
     }
+
   return ret;
 }
 
@@ -445,8 +449,8 @@ static int up_attach(struct uart_dev_s *dev)
  *
  * Description:
  *   Detach UART interrupts.  This method is called when the serial port is
- *   closed normally just before the shutdown method is called.  The exception is
- *   the serial console which is never shutdown.
+ *   closed normally just before the shutdown method is called.  The
+ *   exception is the serial console which is never shutdown.
  *
  ****************************************************************************/
 
@@ -619,6 +623,7 @@ static void up_rxint(struct uart_dev_s *dev, bool enable)
     {
       priv->msr &= ~UART_MSR_RFTIE;
     }
+
   up_serialout(priv, UART_MSR, priv->msr);
 }
 
@@ -671,6 +676,7 @@ static void up_txint(struct uart_dev_s *dev, bool enable)
     {
       priv->msr &= ~UART_MSR_TFTIE;
     }
+
   up_serialout(priv, UART_MSR, priv->msr);
 }
 
@@ -799,7 +805,6 @@ static inline void up_waittxready(void)
 
   for (tmp = 1000 ; tmp > 0 ; tmp--)
     {
-
       if ((getreg16(DM320_REGISTER_BASE + UART_SR) & UART_SR_TFTI) != 0)
         {
           break;