You are viewing a plain text version of this content. The canonical link for it is here.
Posted to java-user@axis.apache.org by Shantanu Sen <ss...@pacbell.net> on 2003/07/30 01:05:16 UTC
soap fault and WSDL2Java question
When I use the following WSDL file, I get this error,
even though the WSDL is validated by Cape Clear WSDL
editor, and I see the name attribute is there.
java.io.IOException: ERROR: Fault is missing a name=
attribute in operation "MyOperation", in binding
{http://MyService}rpc-encoded. at
org.apache.axis.wsdl.symbolTable.SymbolTable.faultsFromSOAPFault(Symb
olTable.java:1988) at
org.apache.axis.wsdl.symbolTable.SymbolTable.populateBindings(SymbolT
able.java:1801) at
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
a:577) at
org.apache.axis.wsdl.symbolTable.SymbolTable.add(SymbolTable.java:421
) at
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
a:408) at
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
a:393) at
org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
at java.lang.Thread.run(Thread.java:479)
The WSDL file is attadched, but here is the relvant
section:
<binding name="rpc-encoded" type="tns:MyPort">
<soap:binding style="rpc"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="MyOperation">
<soap:operation soapAction="MyOperation"/>
<input>
<soap:body use="encoded"
namespace="http://MyService"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
<output>
<soap:body use="encoded"
namespace="http://MyService"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
<fault>
<soap:fault name="tns:MyF" use="encoded"
namespace="http://MyService"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
/>
</fault>
</operation>
</binding>
I am declaring the name attribute here, as you can
see. But with Axis 1.1 I get the above error. It runs
fine with Axis 1.0, which, I believe ignores the name
attribute in a soap fault declaration.
Any ideas what I am missing?
Thanks,
Shantanu Sen
Re: soap fault and WSDL2Java question
Posted by Anne Thomas Manes <an...@manes.net>.
I didn't notice this before -- there's another problem in your WSDL. A Fault assumes document style, therefore your MyException wsdl:message definition should reference an element definition rather than specify a type definition. You also should remove the encodingStyle and namespace attributes from the soap:fault definition.
Anne
----- Original Message -----
From: Shantanu Sen
To: axis-user@ws.apache.org
Sent: Tuesday, July 29, 2003 9:54 PM
Subject: Re: soap fault and WSDL2Java question
I found the error. I did not have the name attribute of wsdl:fault. I was focusing on the name attribute of the soap:fault, which is not really required:
<fault name="MyF">
<soap:fault encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
namespace="http://MyService/binding"
use="literal"/>
</fault>
I can run WSDL2Java with the above change without any problem. But CapeClear does not validate this unless I add a name attribute to the soap:fault. Is the name attribute required in soap:fault? I looked at the WSDL spec. section 3.6, but I am still not clear if it is mandatory.
Shantanu Sen
Shantanu Sen <ss...@pacbell.net> wrote:Anne,
Thanks. But even with that change I get the same
error. It seems that javax.xml.BindingFault.getName()
returns null. I am not sure why it is not picking up
the name attribute. I could not step into that part of
the code which is creating the Bindi! ngFault, which is
in the wsdl4j.jar
Thanks,
Shantanu
--- Anne Thomas Manes wrote:
> Shantanu,
>
> The name= attribute should specify a nmtoken, not a
> QName.
> Therefore your WSDL definition should read:
>
> > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> />
>
> Regards,
> Anne
>
> ----- Original Message -----
> From: "Shantanu Sen"
> To:
> Sent: Tuesday, July 29, 2003 7:05 PM
> Subject: soap fault and WSDL2Java question
>
>
> > When I use the following WSDL file, I get this
> error,
> > even though the WSDL is validated by Cape Clear
> WSDL
> > editor, and I see the name attribute is there.
> >
> > java.io.IOException: ERROR: Fault is missing a
> name=
> > attribute in operation "MyOper! ation", in binding
> > {http://MyService}rpc-encoded. at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.faultsFromSOAPFault(Symb
> > olTable.java:1988) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populateBindings(SymbolT
> > able.java:1801) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:577) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.add(SymbolTable.java:421
> > ) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:408) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:393) at
> >
>
org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
> > at java.lang.Thread.run(Thread.java:479)
> >
> > The WSDL fi! le is attadched, but here is the
> relvant
> > section:
> >
> >
> > > > transport="http://schemas.xmlsoap.org/soap/http"/>
> >
> >
> > [input]
> > > > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> > />
> >
> >
> >
> >
> >
> > I am declaring the name attribute here, as you can
> > see. But with Axis 1.1 I get the above error. It
> runs
> > fine with Axis 1.0, which, I believe ig! nores the
> name
> > attribute in a soap fault declaration.
> >
> > Any ideas what I am missing?
> >
> > Thanks,
> > Shantanu Sen
>
>
>
----------------------------------------------------------------------------
> ----
>
>
> >
> >
> > > > targetNamespace="http://MyService"
> > xmlns:tns="http://MyService"
> > xmlns:typens="http://MyService"
> >
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> >
> xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
> >
> xmlns="http://schemas.xmlsoap.org/wsdl/">
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>! ; >
> > [input]
> >
> > > message="tns:MyException"/>
> >
> >
> >
> >
> >
> > > transport="http://schemas.xmlsoap.org/soap/http"/>
> >
> >
> > [input]
> > > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> />
> >
> >
> >
> >
> >
> >
> >
> > >
location="http://localhost:8084/webservice/Test//Web+Input+Proxy"/>
> >
> >
> >
> >
> &g! t;
> >
>
Re: soap fault and WSDL2Java question
Posted by Anne Thomas Manes <an...@manes.net>.
Per the SOAP Binding Schema [1], the name attribute is required in the
soap:tFault type:
<xs:complexType name="tFault">
<xs:complexContent>
<xs:extension base="soap:tFaultRes">
<xs:attribute name="name" type="xs:NCName" use="required" />
</xs:extension>
</xs:complexContent>
</xs:complexType>
Likewise, per the WSDL Schema [2], the name attribute is also required in
the wsdl:tFault type:
<xs:complexType name="tFault">
<xs:complexContent>
<xs:extension base="wsdl:tExtensibleAttributesDocumented">
<xs:attribute name="name" type="xs:NCName" use="required" />
<xs:attribute name="message" type="xs:QName" use="required" />
</xs:extension>
</xs:complexContent>
</xs:complexType>
[1] http://schemas.xmlsoap.org/wsdl/soap/
[2] http://schemas.xmlsoap.org/wsdl/
Regards,
Anne
----- Original Message -----
From: Shantanu Sen
To: axis-user@ws.apache.org
Sent: Tuesday, July 29, 2003 9:54 PM
Subject: Re: soap fault and WSDL2Java question
I found the error. I did not have the name attribute of wsdl:fault. I was
focusing on the name attribute of the soap:fault, which is not really
required:
<fault name="MyF">
<soap:fault encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
namespace="http://MyService/binding"
use="literal"/>
</fault>
I can run WSDL2Java with the above change without any problem. But CapeClear
does not validate this unless I add a name attribute to the soap:fault. Is
the name attribute required in soap:fault? I looked at the WSDL spec.
section 3.6, but I am still not clear if it is mandatory.
Shantanu Sen
Shantanu Sen <ss...@pacbell.net> wrote:Anne,
Thanks. But even with that change I get the same
error. It seems that javax.xml.BindingFault.getName()
returns null. I am not sure why it is not picking up
the name attribute. I could not step into that part of
the code which is creating the Bindi! ngFault, which is
in the wsdl4j.jar
Thanks,
Shantanu
--- Anne Thomas Manes wrote:
> Shantanu,
>
> The name= attribute should specify a nmtoken, not a
> QName.
> Therefore your WSDL definition should read:
>
> > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> />
>
> Regards,
> Anne
>
> ----- Original Message -----
> From: "Shantanu Sen"
> To:
> Sent: Tuesday, July 29, 2003 7:05 PM
> Subject: soap fault and WSDL2Java question
>
>
> > When I use the following WSDL file, I get this
> error,
> > even though the WSDL is validated by Cape Clear
> WSDL
> > editor, and I see the name attribute is there.
> >
> > java.io.IOException: ERROR: Fault is missing a
> name=
> > attribute in operation "MyOper! ation", in binding
> > {http://MyService}rpc-encoded. at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.faultsFromSOAPFault(Symb
> > olTable.java:1988) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populateBindings(SymbolT
> > able.java:1801) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:577) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.add(SymbolTable.java:421
> > ) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:408) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:393) at
> >
>
org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
> > at java.lang.Thread.run(Thread.java:479)
> >
> > The WSDL fi! le is attadched, but here is the
> relvant
> > section:
> >
> >
> > > > transport="http://schemas.xmlsoap.org/soap/http"/>
> >
> >
> > [input]
> > > > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> > />
> >
> >
> >
> >
> >
> > I am declaring the name attribute here, as you can
> > see. But with Axis 1.1 I get the above error. It
> runs
> > fine with Axis 1.0, which, I believe ig! nores the
> name
> > attribute in a soap fault declaration.
> >
> > Any ideas what I am missing?
> >
> > Thanks,
> > Shantanu Sen
>
>
>
----------------------------------------------------------------------------
> ----
>
>
> >
> >
> > > > targetNamespace="http://MyService"
> > xmlns:tns="http://MyService"
> > xmlns:typens="http://MyService"
> >
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> >
> xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
> >
> xmlns="http://schemas.xmlsoap.org/wsdl/">
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>! ; >
> > [input]
> >
> > > message="tns:MyException"/>
> >
> >
> >
> >
> >
> > > transport="http://schemas.xmlsoap.org/soap/http"/>
> >
> >
> > [input]
> > > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> />
> >
> >
> >
> >
> >
> >
> >
> > >
location="http://localhost:8084/webservice/Test//Web+Input+Proxy"/>
> >
> >
> >
> >
> &g! t;
> >
>
Re: soap fault and WSDL2Java question
Posted by Shantanu Sen <ss...@pacbell.net>.
I found the error. I did not have the name attribute of wsdl:fault. I was focusing on the name attribute of the soap:fault, which is not really required:
<fault name="MyF">
<soap:fault encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
namespace="http://MyService/binding"
use="literal"/>
</fault>
I can run WSDL2Java with the above change without any problem. But CapeClear does not validate this unless I add a name attribute to the soap:fault. Is the name attribute required in soap:fault? I looked at the WSDL spec. section 3.6, but I am still not clear if it is mandatory.
Shantanu Sen
Shantanu Sen <ss...@pacbell.net> wrote:Anne,
Thanks. But even with that change I get the same
error. It seems that javax.xml.BindingFault.getName()
returns null. I am not sure why it is not picking up
the name attribute. I could not step into that part of
the code which is creating the BindingFault, which is
in the wsdl4j.jar
Thanks,
Shantanu
--- Anne Thomas Manes wrote:
> Shantanu,
>
> The name= attribute should specify a nmtoken, not a
> QName.
> Therefore your WSDL definition should read:
>
> > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> />
>
> Regards,
> Anne
>
> ----- Original Message -----
> From: "Shantanu Sen"
> To:
> Sent: Tuesday, July 29, 2003 7:05 PM
> Subject: soap fault and WSDL2Java question
>
>
> > When I use the following WSDL file, I get this
> error,
> > even though the WSDL is validated by Cape Clear
> WSDL
> > editor, and I see the name attribute is there.
> >
> > java.io.IOException: ERROR: Fault is missing a
> name=
> > attribute in operation "MyOperation", in binding
> > {http://MyService}rpc-encoded. at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.faultsFromSOAPFault(Symb
> > olTable.java:1988) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populateBindings(SymbolT
> > able.java:1801) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:577) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.add(SymbolTable.java:421
> > ) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:408) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:393) at
> >
>
org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
> > at java.lang.Thread.run(Thread.java:479)
> >
> > The WSDL file is attadched, but here is the
> relvant
> > section:
> >
> >
> > > > transport="http://schemas.xmlsoap.org/soap/http"/>
> >
> >
> > [input]
> > > > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> > />
> >
> >
> >
> >
> >
> > I am declaring the name attribute here, as you can
> > see. But with Axis 1.1 I get the above error. It
> runs
> > fine with Axis 1.0, which, I believe ignores the
> name
> > attribute in a soap fault declaration.
> >
> > Any ideas what I am missing?
> >
> > Thanks,
> > Shantanu Sen
>
>
>
----------------------------------------------------------------------------
> ----
>
>
> >
> >
> > > > targetNamespace="http://MyService"
> > xmlns:tns="http://MyService"
> > xmlns:typens="http://MyService"
> >
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> >
> xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
> >
> xmlns="http://schemas.xmlsoap.org/wsdl/">
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [input]
> >
> > > message="tns:MyException"/>
> >
> >
> >
> >
> >
> > > transport="http://schemas.xmlsoap.org/soap/http"/>
> >
> >
> > [input]
> > > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> >
> >
> > > namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> />
> >
> >
> >
> >
> >
> >
> >
> > >
location="http://localhost:8084/webservice/Test//Web+Input+Proxy"/>
> >
> >
> >
> >
> >
> >
>
Re: soap fault and WSDL2Java question
Posted by Shantanu Sen <ss...@pacbell.net>.
Anne,
Thanks. But even with that change I get the same
error. It seems that javax.xml.BindingFault.getName()
returns null. I am not sure why it is not picking up
the name attribute. I could not step into that part of
the code which is creating the BindingFault, which is
in the wsdl4j.jar
Thanks,
Shantanu
--- Anne Thomas Manes <an...@manes.net> wrote:
> Shantanu,
>
> The name= attribute should specify a nmtoken, not a
> QName.
> Therefore your WSDL definition should read:
>
> <soap:fault name="MyF" use="encoded"
> namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> />
>
> Regards,
> Anne
>
> ----- Original Message -----
> From: "Shantanu Sen" <ss...@pacbell.net>
> To: <ax...@ws.apache.org>
> Sent: Tuesday, July 29, 2003 7:05 PM
> Subject: soap fault and WSDL2Java question
>
>
> > When I use the following WSDL file, I get this
> error,
> > even though the WSDL is validated by Cape Clear
> WSDL
> > editor, and I see the name attribute is there.
> >
> > java.io.IOException: ERROR: Fault is missing a
> name=
> > attribute in operation "MyOperation", in binding
> > {http://MyService}rpc-encoded. at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.faultsFromSOAPFault(Symb
> > olTable.java:1988) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populateBindings(SymbolT
> > able.java:1801) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:577) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.add(SymbolTable.java:421
> > ) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:408) at
> >
>
org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> > a:393) at
> >
>
org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
> > at java.lang.Thread.run(Thread.java:479)
> >
> > The WSDL file is attadched, but here is the
> relvant
> > section:
> >
> > <binding name="rpc-encoded" type="tns:MyPort">
> > <soap:binding style="rpc"
> > transport="http://schemas.xmlsoap.org/soap/http"/>
> > <operation name="MyOperation">
> > <soap:operation soapAction="MyOperation"/>
> > <input>
> > <soap:body use="encoded"
> > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> > </input>
> > <output>
> > <soap:body use="encoded"
> > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> > </output>
> > <fault>
> > <soap:fault name="tns:MyF" use="encoded"
> > namespace="http://MyService"
> >
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> > />
> > </fault>
> > </operation>
> > </binding>
> >
> >
> > I am declaring the name attribute here, as you can
> > see. But with Axis 1.1 I get the above error. It
> runs
> > fine with Axis 1.0, which, I believe ignores the
> name
> > attribute in a soap fault declaration.
> >
> > Any ideas what I am missing?
> >
> > Thanks,
> > Shantanu Sen
>
>
>
----------------------------------------------------------------------------
> ----
>
>
> > <?xml version="1.0" ?>
> >
> > <definitions name="http://MyService"
> > targetNamespace="http://MyService"
> > xmlns:tns="http://MyService"
> > xmlns:typens="http://MyService"
> >
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> >
> xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
> >
> xmlns="http://schemas.xmlsoap.org/wsdl/">
> >
> > <!-- type defs -->
> >
> > <!-- message declns -->
> > <message name="MyRequest">
> > <part name="subject" type="xsd:string"/>
> > </message>
> >
> > <message name="MyResponse">
> > <part name="confirmation" type="xsd:string"/>
> > </message>
> >
> > <message name="MyException">
> > <part name="exception" type="xsd:string"/>
> > </message>
> >
> > <!-- port type declns -->
> > <portType name="MyPort">
> > <operation name="MyOperation">
> > <input message="tns:MyRequest"/>
> > <output message="tns:MyResponse"/>
> > <fault name="MyF"
> message="tns:MyException"/>
> > </operation>
> > </portType>
> >
> > <!-- binding declns -->
> > <binding name="rpc-encoded" type="tns:MyPort">
> > <soap:binding style="rpc"
> transport="http://schemas.xmlsoap.org/soap/http"/>
> > <operation name="MyOperation">
> > <soap:operation soapAction="MyOperation"/>
> > <input>
> > <soap:body use="encoded"
> namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> > </input>
> > <output>
> > <soap:body use="encoded"
> namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> > </output>
> > <fault>
> > <soap:fault name="tns:MyF" use="encoded"
> namespace="http://MyService"
>
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> />
> > </fault>
> > </operation>
> > </binding>
> >
> > <!-- service decln -->
> > <service name="MyProvider">
> > <port name="MyPort" binding="tns:rpc-encoded">
> > <soap:address
>
location="http://localhost:8084/webservice/Test//Web+Input+Proxy"/>
> > </port>
> > </service>
> >
> > </definitions>
> >
> >
>
Re: soap fault and WSDL2Java question
Posted by Anne Thomas Manes <an...@manes.net>.
Shantanu,
The name= attribute should specify a nmtoken, not a QName.
Therefore your WSDL definition should read:
<soap:fault name="MyF" use="encoded" namespace="http://MyService"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" />
Regards,
Anne
----- Original Message -----
From: "Shantanu Sen" <ss...@pacbell.net>
To: <ax...@ws.apache.org>
Sent: Tuesday, July 29, 2003 7:05 PM
Subject: soap fault and WSDL2Java question
> When I use the following WSDL file, I get this error,
> even though the WSDL is validated by Cape Clear WSDL
> editor, and I see the name attribute is there.
>
> java.io.IOException: ERROR: Fault is missing a name=
> attribute in operation "MyOperation", in binding
> {http://MyService}rpc-encoded. at
> org.apache.axis.wsdl.symbolTable.SymbolTable.faultsFromSOAPFault(Symb
> olTable.java:1988) at
> org.apache.axis.wsdl.symbolTable.SymbolTable.populateBindings(SymbolT
> able.java:1801) at
> org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> a:577) at
> org.apache.axis.wsdl.symbolTable.SymbolTable.add(SymbolTable.java:421
> ) at
> org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> a:408) at
> org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.jav
> a:393) at
> org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
> at java.lang.Thread.run(Thread.java:479)
>
> The WSDL file is attadched, but here is the relvant
> section:
>
> <binding name="rpc-encoded" type="tns:MyPort">
> <soap:binding style="rpc"
> transport="http://schemas.xmlsoap.org/soap/http"/>
> <operation name="MyOperation">
> <soap:operation soapAction="MyOperation"/>
> <input>
> <soap:body use="encoded"
> namespace="http://MyService"
> encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> </input>
> <output>
> <soap:body use="encoded"
> namespace="http://MyService"
> encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> </output>
> <fault>
> <soap:fault name="tns:MyF" use="encoded"
> namespace="http://MyService"
> encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
> />
> </fault>
> </operation>
> </binding>
>
>
> I am declaring the name attribute here, as you can
> see. But with Axis 1.1 I get the above error. It runs
> fine with Axis 1.0, which, I believe ignores the name
> attribute in a soap fault declaration.
>
> Any ideas what I am missing?
>
> Thanks,
> Shantanu Sen
----------------------------------------------------------------------------
----
> <?xml version="1.0" ?>
>
> <definitions name="http://MyService"
> targetNamespace="http://MyService"
> xmlns:tns="http://MyService"
> xmlns:typens="http://MyService"
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
> xmlns="http://schemas.xmlsoap.org/wsdl/">
>
> <!-- type defs -->
>
> <!-- message declns -->
> <message name="MyRequest">
> <part name="subject" type="xsd:string"/>
> </message>
>
> <message name="MyResponse">
> <part name="confirmation" type="xsd:string"/>
> </message>
>
> <message name="MyException">
> <part name="exception" type="xsd:string"/>
> </message>
>
> <!-- port type declns -->
> <portType name="MyPort">
> <operation name="MyOperation">
> <input message="tns:MyRequest"/>
> <output message="tns:MyResponse"/>
> <fault name="MyF" message="tns:MyException"/>
> </operation>
> </portType>
>
> <!-- binding declns -->
> <binding name="rpc-encoded" type="tns:MyPort">
> <soap:binding style="rpc"
transport="http://schemas.xmlsoap.org/soap/http"/>
> <operation name="MyOperation">
> <soap:operation soapAction="MyOperation"/>
> <input>
> <soap:body use="encoded" namespace="http://MyService"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> </input>
> <output>
> <soap:body use="encoded" namespace="http://MyService"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
> </output>
> <fault>
> <soap:fault name="tns:MyF" use="encoded"
namespace="http://MyService"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" />
> </fault>
> </operation>
> </binding>
>
> <!-- service decln -->
> <service name="MyProvider">
> <port name="MyPort" binding="tns:rpc-encoded">
> <soap:address
location="http://localhost:8084/webservice/Test//Web+Input+Proxy"/>
> </port>
> </service>
>
> </definitions>
>
>