You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@jmeter.apache.org by pm...@apache.org on 2017/11/18 13:32:56 UTC
svn commit: r1815664 - /jmeter/trunk/bin/jmeter.properties
Author: pmouawad
Date: Sat Nov 18 13:32:56 2017
New Revision: 1815664
URL: http://svn.apache.org/viewvc?rev=1815664&view=rev
Log:
Improve wording and formatting of jmeter.properties
Contributed by Graham Russell
This closes #328
Modified:
jmeter/trunk/bin/jmeter.properties
Modified: jmeter/trunk/bin/jmeter.properties
URL: http://svn.apache.org/viewvc/jmeter/trunk/bin/jmeter.properties?rev=1815664&r1=1815663&r2=1815664&view=diff
==============================================================================
--- jmeter/trunk/bin/jmeter.properties (original)
+++ jmeter/trunk/bin/jmeter.properties Sat Nov 18 13:32:56 2017
@@ -8,9 +8,9 @@
## The ASF licenses this file to You under the Apache License, Version 2.0
## (the "License"); you may not use this file except in compliance with
## the License. You may obtain a copy of the License at
-##
+##
## http://www.apache.org/licenses/LICENSE-2.0
-##
+##
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
@@ -177,7 +177,7 @@ jmeter.laf.mac=System
#jmeter.tree.icons.size=32x32
#Components to not display in JMeter GUI (GUI class name or static label)
-# These elements are deprecated and will be removed in next version:
+# These elements are deprecated and will be removed in next version:
# MongoDB Script, MongoDB Source Config, Monitor Results
# BSF Elements
not_in_menu=org.apache.jmeter.protocol.mongodb.sampler.MongoScriptSampler,org.apache.jmeter.protocol.mongodb.config.MongoSourceElement,\
@@ -261,7 +261,7 @@ remote_hosts=127.0.0.1
# On the client:
# - set remote_hosts=server:1234
-# Parameter that controls the RMI port used by the RemoteSampleListenerImpl (The Controler)
+# Parameter that controls the RMI port used by RemoteSampleListenerImpl (The Controller)
# Default value is 0 which means port is randomly assigned
# You may need to open Firewall port on the Controller machine
#client.rmi.localport=0
@@ -275,7 +275,7 @@ remote_hosts=127.0.0.1
#client.retries_delay=5000
# When all initialization tries was made, test will fail if some remote engines are failed
-# Set following property to true to ignore failed nodes and proceed with test
+# Set following property to true to ignore failed nodes and proceed with test
#client.continue_on_fail=false
# To change the default port (1099) used to access the server:
@@ -311,7 +311,7 @@ remote_hosts=127.0.0.1
# Following properties apply to Apache HttpClient
#---------------------------------------------------------------------------
-# set the socket timeout (or use the parameter http.socket.timeout)
+# set the socket timeout (or use the parameter http.socket.timeout)
# for AJP Sampler implementation.
# Value is in milliseconds
#httpclient.timeout=0
@@ -336,7 +336,7 @@ remote_hosts=127.0.0.1
# AuthManager Kerberos configuration
# Name of application module used in jaas.conf
-#kerberos_jaas_application=JMeter
+#kerberos_jaas_application=JMeter
# Should ports be stripped from urls before constructing SPNs
# for SPNEGO authentication
@@ -358,7 +358,7 @@ remote_hosts=127.0.0.1
# true if it's OK to retry requests that have been sent
# This will retry Idempotent and non Idempotent requests
-# This should usually be false, but it can be useful
+# This should usually be false, but it can be useful
# when testing against some Load Balancers like Amazon ELB
#httpclient4.request_sent_retry_enabled=false
@@ -368,15 +368,16 @@ remote_hosts=127.0.0.1
# If <= 0, idle timeout will only apply if the server sends a Keep-Alive header
#httpclient4.idletimeout=0
-# Check connections if the elapsed time (Milliseconds) since the last
+# Check connections if the elapsed time (Milliseconds) since the last
# use of the connection exceed this value
#httpclient4.validate_after_inactivity=1700
-# TTL (in Milliseconds) represents an absolute value.
-# No matter what, the connection will not be re-used beyond its TTL.
+# TTL (in Milliseconds) represents an absolute value.
+# No matter what, the connection will not be re-used beyond its TTL.
#httpclient4.time_to_live=2000
-# Max size in bytes of PUT body to retain in result sampler. Bigger results will be clipped.
+# Max size in bytes of PUT body to retain in result sampler.
+# Bigger results will be clipped.
#httpclient4.max_body_retain_size=32768
#---------------------------------------------------------------------------
@@ -387,7 +388,7 @@ remote_hosts=127.0.0.1
#cacheable_methods=GET
# N.B. This property is currently a temporary solution for Bug 56162
-# Since 2.12, JMeter does not create anymore a Sample Result with 204 response
+# Since 2.12, JMeter does not create anymore a Sample Result with 204 response
# code for a resource found in cache which is inline with what browser do.
#cache_manager.cached_resource_mode=RETURN_NO_SAMPLE
@@ -397,10 +398,17 @@ remote_hosts=127.0.0.1
# RETURN_CUSTOM_STATUS
# Those mode have the following behaviours:
-# RETURN_NO_SAMPLE : this mode returns no Sample Result, it has no additional configuration
-# RETURN_200_CACHE : this mode will return Sample Result with response code to 200 and response message to "(ex cache)", you can modify response message by setting
+# RETURN_NO_SAMPLE:
+# this mode returns no Sample Result, it has no additional configuration
+
+# RETURN_200_CACHE:
+# this mode will return Sample Result with response code to 200 and
+# response message to "(ex cache)", you can modify response message by setting
# RETURN_200_CACHE.message=(ex cache)
-# RETURN_CUSTOM_STATUS : This mode lets you select what response code and message you want to return, if you use this mode you need to set those properties
+
+# RETURN_CUSTOM_STATUS:
+# This mode lets you select what response code and message you want to return,
+# if you use this mode you need to set those properties
# RETURN_CUSTOM_STATUS.code=
# RETURN_CUSTOM_STATUS.message=
@@ -414,9 +422,8 @@ remote_hosts=127.0.0.1
# legitimate values: xml, csv, db. Only xml and csv are currently supported.
#jmeter.save.saveservice.output_format=csv
-
-# true when field should be saved; false otherwise
-
+# The below properties are true when field should be saved; false otherwise
+#
# assertion_results_failure_message only affects CSV output
#jmeter.save.saveservice.assertion_results_failure_message=true
#
@@ -462,7 +469,7 @@ remote_hosts=127.0.0.1
# where the fields' values are separated by specified delimiters.
# Default:
#jmeter.save.saveservice.default_delimiter=,
-# For TAB, since JMeter 2.3 one can use:
+# For TAB, one can use:
#jmeter.save.saveservice.default_delimiter=\t
# Only applies to CSV format files:
@@ -617,7 +624,7 @@ cssParser.types=text/css
# It can be disabled by setting its value to 0
#css.parser.cache.size=400
-# Let the CSS Parser ingore all css errors
+# Let the CSS Parser ignore all css errors
#css.parser.ignore_all_css_errors=true
#---------------------------------------------------------------------------
@@ -635,14 +642,14 @@ htmlParser.className=org.apache.jmeter.p
# Default parser before 2.10
#htmlParser.className=org.apache.jmeter.protocol.http.parser.JTidyHTMLParser
# Note that Regexp extractor may detect references that have been commented out.
-# In many cases it will work OK, but you should be aware that it may generate
+# In many cases it will work OK, but you should be aware that it may generate
# additional references.
#htmlParser.className=org.apache.jmeter.protocol.http.parser.RegexpHTMLParser
-# This parser is based on JSoup, it should be the most accurate but less performant
-# than LagartoBasedHtmlParser
+# This parser is based on JSoup, it should be the most accurate but less
+# performant than LagartoBasedHtmlParser
#htmlParser.className=org.apache.jmeter.protocol.http.parser.JsoupBasedHtmlParser
-#Used by HTTPSamplerBase to associate htmlParser with content types below
+#Used by HTTPSamplerBase to associate htmlParser with content types below
htmlParser.types=text/html application/xhtml+xml application/xml text/xml
#---------------------------------------------------------------------------
@@ -651,8 +658,8 @@ htmlParser.types=text/html application/x
wmlParser.className=org.apache.jmeter.protocol.http.parser.RegexpHTMLParser
-#Used by HTTPSamplerBase to associate wmlParser with content types below
-wmlParser.types=text/vnd.wap.wml
+#Used by HTTPSamplerBase to associate wmlParser with content types below
+wmlParser.types=text/vnd.wap.wml
#---------------------------------------------------------------------------
# Remote batching configuration
@@ -662,9 +669,9 @@ wmlParser.types=text/vnd.wap.wml
# - false means server configuration will be used
#sample_sender_client_configured=true
-# By default when Stripping modes are used JMeter since 3.1 will strip
+# By default when Stripping modes are used JMeter since 3.1 will strip
# response even for SampleResults in error.
-# If you want to revert to previous behaviour (no stripping of Responses in error)
+# If you want to revert to previous behaviour (no stripping of Responses in error)
# set this property to false
#sample_sender_strip_also_on_error=true
@@ -700,7 +707,7 @@ wmlParser.types=text/vnd.wap.wml
#mode=DiskStore
# Same as DiskStore but strips response data from SampleResult
#mode=StrippedDiskStore
-# Note: the mode is currently resolved on the client;
+# Note: the mode is currently resolved on the client;
# other properties (e.g. time_threshold) are resolved on the server.
#---------------------------------------------------------------------------
@@ -769,7 +776,7 @@ summariser.name=summary
#summariser.out=true
# Ignore SampleResults generated by TransactionControllers
-# defaults to true
+# defaults to true
#summariser.ignore_transaction_controller_sample_result=true
@@ -790,20 +797,20 @@ summariser.name=summary
# BackendListener - configuration
#---------------------------------------------------------------------------
#
-# Backend metrics window mode (fixed=fixed-size window, timed=time boxed)
+# Backend metrics window mode (fixed=fixed-size window, timed=time boxed)
#backend_metrics_window_mode=fixed
# Backend metrics sliding window size for Percentiles, Min, Max
#backend_metrics_window=100
-# Backend metrics sliding window size for Percentiles, Min, Max
+# Backend metrics sliding window size for Percentiles, Min, Max
# when backend_metrics_window_mode is timed
-# Setting this value too high can lead to OOM
+# Setting this value too high can lead to OOM
#backend_metrics_large_window=5000
########################
# Graphite Backend
########################
-# Send interval in second
+# Send interval in second
# Defaults to 1 second
#backend_graphite.send_interval=1
@@ -811,7 +818,7 @@ summariser.name=summary
# Influx Backend
########################
-# Send interval in second
+# Send interval in second
# Defaults to 5 seconds
#backend_influxdb.send_interval=5
#Influxdb timeouts
@@ -861,7 +868,7 @@ beanshell.server.file=../extras/startup.
#Path to Groovy file containing utility functions to make available to __groovy function
#groovy.utilities=
-# Example
+# Example
#groovy.utilities=bin/utility.groovy
#---------------------------------------------------------------------------
@@ -918,7 +925,7 @@ csvdataset.file.encoding_list=UTF-8|UTF-
# "Equals" response assertions will be very likely to fail against search results.
#
#ldapsampler.max_sorted_results=1000
-
+
# Number of characters to log for each of three sections (starting matching section, diff section,
# ending matching section where not all sections will appear for all diffs) diff display when an Equals
# assertion fails. So a value of 100 means a maximum of 300 characters of diff text will be displayed
@@ -931,8 +938,8 @@ csvdataset.file.encoding_list=UTF-8|UTF-
#---------------------------------------------------------------------------
# Miscellaneous configuration
#---------------------------------------------------------------------------
-# Used to control what happens when you start a test and
-# have listeners that could overwrite existing result files
+# Used to control what happens when you start a test and
+# have listeners that could overwrite existing result files
# Possible values:
# ASK : Ask user
# APPEND : Append results to existing file
@@ -953,7 +960,7 @@ csvdataset.file.encoding_list=UTF-8|UTF-
#jmeter.expertMode=true
# Max size of bytes stored in memory per SampleResult
-# Ensure you don't exceed max capacity of a Java Array and remember
+# Ensure you don't exceed max capacity of a Java Array and remember
# that the higher it is, the higher JMeter will consume heap
# Defaults to 0, which means no truncation
#httpsampler.max_bytes_to_store_per_request=0
@@ -971,7 +978,7 @@ csvdataset.file.encoding_list=UTF-8|UTF-
#httpsampler.separate.container=true
# If embedded resources download fails due to missing resources or other reasons, if this property is true
-# Parent sample will not be marked as failed
+# Parent sample will not be marked as failed
#httpsampler.ignore_failed_embedded_resources=false
#keep alive time for the parallel download threads (in seconds)
@@ -1002,7 +1009,7 @@ csvdataset.file.encoding_list=UTF-8|UTF-
# CookieManager behaviour - prefix to add to cookie name before storing it as a variable
# Default is COOKIE_; to remove the prefix, define it as one or more spaces
#CookieManager.name.prefix=
-
+
# CookieManager behaviour - check received cookies are valid before storing them?
# Default is true. Use false to revert to previous behaviour
#CookieManager.check.cookies=true
@@ -1035,7 +1042,7 @@ cookies=cookies
#jmeterengine.force.system.exit=false
# How long to pause (in ms) in the daemon thread before reporting that the JVM has failed to exit.
-# If the value is <= 0, the JMeter does not start the daemon thread
+# If the value is <= 0, the JMeter does not start the daemon thread
#jmeter.exit.check.pause=2000
# If running non-GUI, then JMeter listens on the following port for a shutdown message.
@@ -1063,7 +1070,7 @@ cookies=cookies
#jsyntaxtextarea.font.family=Hack
#jsyntaxtextarea.font.size=14
-# Set this to false to disable the use of JSyntaxTextArea for the Console Logger panel
+# Set this to false to disable the use of JSyntaxTextArea for the Console Logger panel
#loggerpanel.usejsyntaxtext=true
# Maximum size of HTML page that can be displayed; default=10 mbytes
@@ -1206,7 +1213,7 @@ system.properties=system.properties
# Default Timer GUI class added to Test Plan by DefaultThinkTimeCreator
#think_time_creator.default_timer_implementation=org.apache.jmeter.timers.gui.UniformRandomTimerGui
-# Default constant pause of Timer
+# Default constant pause of Timer
#think_time_creator.default_constant_pause=1000
# Default range pause of Timer
@@ -1230,4 +1237,3 @@ jmeter.reportgenerator.apdex_tolerated_t
# Implementation of interface org.apache.jmeter.gui.action.TreeNodeNamingPolicy
#naming_policy.impl=org.apache.jmeter.gui.action.impl.DefaultTreeNodeNamingPolicy
-