You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@geronimo.apache.org by Anshuk Chinmoy Pal Chaudhuri <An...@infosys.com> on 2007/09/06 15:50:49 UTC
manifest classloader issue
Hi,
I am trying to deploy a connector rar from inside the ear on Geronimo
1.1.1. The connector ra.xml file refers to all the classes like the
activationspec-class and so on. If I put the jar (containing all these
classes), just directly under the connector rar, the the ear is
deploying properly, but when I try to put the jar inside
deployable.ear\lib and mention the jar path in the manifest.mf of the
connector.rar (..\lib\classes.jar) ..it gives class not found (which is
there in the jar)
I have also tried to put the jar path in the manifest.mf of the
deployable.ear --> (.\lib\classes.jar), there is the same classnotfound
problem.
The structure which works fine:
deployable.ear
- Meta-Inf
- Manifest.mf
- connector.rar
- Meta-Inf
- Manifest.mf
-classes.jar
The structure which does not work fine:
deployable.ear
- Meta-Inf
- Manifest.mf
- connector.rar
- Meta-Inf
- Manifest.mf
- lib
- classes.jar
Is there any workaround for this?
Warm Regards,
Anshuk Pal Chaudhuri
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
Re: manifest classloader issue
Posted by David Jencks <da...@yahoo.com>.
On Sep 6, 2007, at 11:52 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
> Hi,
>
>
>
>
>
> One more query on this classloader. As I said earlier, I have
> already deployed the connector.rar and have mentioned the required
> classes.jar in the manifest worked fine. Now I was trying to deploy
> a ejb as well as the next module in the ear, and it required some
> other jars from the same lib folder in the ear, so I mention those
> jar (e.g. ejbclasses.jar) in the manifest.mf of the ejbapp.jar, but
> it gives NoClassDefFound.
I find that very surprising and wonder if you have the right path in
the manifest classpath.
>
>
> But when have I mentioned the same required ejbclasses.jar in the
> manifest.mf of the first module of connector.rar, it is getting
> deployed correctly.
>
>
>
> Please correct me if I am wrong, as the connector.rar is getting
> loaded first, and the class for ejb which is not being found is in
> the parent classloader of the connector.rar and that is the reason
> why the class not getting found. I checked it @ http://mail-
> archives.apache.org/mod_mbox/geronimo-user/200705.mbox/%
> 3C84706160@web.de%3E .
All ejb modules and connector modules and anything reachable in their
manifest classpaths (transitively) all gets added to the same
classloader and used for all these modules. Only wars get separate
(child) classloaders.
thanks
david jencks
>
>
> So the way I made it work, is that the correct way, or is there any
> other workaround?
>
> Warm Regards,
> Anshuk Pal Chaudhuri
>
> From: Anshuk Chinmoy Pal Chaudhuri
> [mailto:Anshuk_PalChaudhuri@infosys.com]
> Sent: Thursday, September 06, 2007 9:14 PM
> To: user@geronimo.apache.org
> Subject: RE: manifest classloader issue
>
>
>
> Hi David,
>
>
>
> Yeah..you are spot on..it worked in g 1.1.1 by the lib/classes.jar
>
>
>
> Thanks a lot.
>
> Warm Regards,
> Anshuk Pal Chaudhuri
>
> From: David Jencks [mailto:david_jencks@yahoo.com]
> Sent: Thursday, September 06, 2007 8:54 PM
> To: user@geronimo.apache.org
> Subject: Re: manifest classloader issue
>
>
>
>
>
> On Sep 6, 2007, at 8:18 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
>
>
>
> Hi Kevin,
>
>
>
> I did try on Geronimo 2.0.1, it did work on that, but I have to
> make it work on 1.1.1. Is there any workaround?
>
>
>
> I think it worked on 2.0.1 because anything in the ear lib
> directory (lib by default) is added to the ear classloader, not
> because of your manifest classpath entry which I think should be
> lib/classes.jar.
>
>
>
> thanks
>
> david jencks
>
>>
>>
>>
>>
>> Warm Regards,
>> Anshuk Pal Chaudhuri
>>
>> From: Anshuk Chinmoy Pal Chaudhuri
>> [mailto:Anshuk_PalChaudhuri@infosys.com]
>> Sent: Thursday, September 06, 2007 8:25 PM
>> To: user@geronimo.apache.org
>> Subject: RE: manifest classloader issue
>>
>>
>>
>> Hi Kevin,
>>
>>
>>
>> I will definitely take care of your request going further on.
>>
>>
>>
>> Manifest.mf content
>>
>>
>>
>> Manifest-Version: 1.0
>>
>> Class-Path: ../lib/classes.jar
>>
>>
>>
>> No, I haven’t tried on 2.0.1, we have to work on Geronimo 1.1.1,
>> that is what the requirement is.
>>
>>
>>
>> Thanks.
>>
>> Warm Regards,
>> Anshuk Pal Chaudhuri
>>
>> From: Kevan Miller [mailto:kevan.miller@gmail.com]
>> Sent: Thursday, September 06, 2007 8:14 PM
>> To: user@geronimo.apache.org
>> Subject: Re: manifest classloader issue
>>
>>
>>
>> Anshuk,
>>
>> One request -- please use "New Message" to start a new email
>> thread, rather than using "Reply" and editing the subject.
>>
>>
>>
>> More below...
>>
>>
>>
>> On Sep 6, 2007, at 9:50 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
>>
>>
>>
>> Hi,
>>
>>
>>
>> I am trying to deploy a connector rar from inside the ear on
>> Geronimo 1.1.1. The connector ra.xml file refers to all the
>> classes like the activationspec-class and so on. If I put the jar
>> (containing all these classes), just directly under the connector
>> rar, the the ear is deploying properly, but when I try to put the
>> jar inside deployable.ear\lib and mention the jar path in the
>> manifest.mf of the connector.rar (..\lib\classes.jar) ..it gives
>> class not found (which is there in the jar)
>>
>> Rather that providing your own version of spec classes, I
>> recommend you use Geronimo's supplied specs via dependencies,
>> instead.
>>
>>
>>
>> What is the contents of your Manifest.mf? Have you tried this on
>> Geronimo 2.0.1?
>>
>>
>>
>> --kevan
>>
>> **************** CAUTION - Disclaimer *****************
>> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION
>> intended solely for the use of the addressee(s). If you are not
>> the intended recipient, please notify the sender by e-mail and
>> delete the original message. Further, you are not to copy,
>> disclose, or distribute this e-mail or its contents to any other
>> person and any such actions are unlawful. This e-mail may contain
>> viruses. Infosys has taken every reasonable precaution to minimize
>> this risk, but is not liable for any damage you may sustain as a
>> result of any virus in this e-mail. You should carry out your own
>> virus checks before opening the e-mail or attachment. Infosys
>> reserves the right to monitor and review the content of all
>> messages sent to or from this e-mail address. Messages sent to or
>> from this e-mail address may be stored on the Infosys e-mail system.
>> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>>
>>
>
>
>
RE: manifest classloader issue
Posted by Anshuk Chinmoy Pal Chaudhuri <An...@infosys.com>.
Hi,
One more query on this classloader. As I said earlier, I have already
deployed the connector.rar and have mentioned the required classes.jar
in the manifest worked fine. Now I was trying to deploy a ejb as well as
the next module in the ear, and it required some other jars from the
same lib folder in the ear, so I mention those jar (e.g. ejbclasses.jar)
in the manifest.mf of the ejbapp.jar, but it gives NoClassDefFound.
But when have I mentioned the same required ejbclasses.jar in the
manifest.mf of the first module of connector.rar, it is getting deployed
correctly.
Please correct me if I am wrong, as the connector.rar is getting loaded
first, and the class for ejb which is not being found is in the parent
classloader of the connector.rar and that is the reason why the class
not getting found. I checked it @
http://mail-archives.apache.org/mod_mbox/geronimo-user/200705.mbox/%3C84
706160@web.de%3E .
So the way I made it work, is that the correct way, or is there any
other workaround?
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: Anshuk Chinmoy Pal Chaudhuri
[mailto:Anshuk_PalChaudhuri@infosys.com]
Sent: Thursday, September 06, 2007 9:14 PM
To: user@geronimo.apache.org
Subject: RE: manifest classloader issue
Hi David,
Yeah..you are spot on..it worked in g 1.1.1 by the lib/classes.jar
Thanks a lot.
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: David Jencks [mailto:david_jencks@yahoo.com]
Sent: Thursday, September 06, 2007 8:54 PM
To: user@geronimo.apache.org
Subject: Re: manifest classloader issue
On Sep 6, 2007, at 8:18 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
Hi Kevin,
I did try on Geronimo 2.0.1, it did work on that, but I have to make it
work on 1.1.1. Is there any workaround?
I think it worked on 2.0.1 because anything in the ear lib directory
(lib by default) is added to the ear classloader, not because of your
manifest classpath entry which I think should be lib/classes.jar.
thanks
david jencks
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: Anshuk Chinmoy Pal Chaudhuri
[mailto:Anshuk_PalChaudhuri@infosys.com]
Sent: Thursday, September 06, 2007 8:25 PM
To: user@geronimo.apache.org
Subject: RE: manifest classloader issue
Hi Kevin,
I will definitely take care of your request going further on.
Manifest.mf content
Manifest-Version: 1.0
Class-Path: ../lib/classes.jar
No, I haven't tried on 2.0.1, we have to work on Geronimo 1.1.1,
that is what the requirement is.
Thanks.
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: Kevan Miller [mailto:kevan.miller@gmail.com]
Sent: Thursday, September 06, 2007 8:14 PM
To: user@geronimo.apache.org
Subject: Re: manifest classloader issue
Anshuk,
One request -- please use "New Message" to start a new email
thread, rather than using "Reply" and editing the subject.
More below...
On Sep 6, 2007, at 9:50 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
Hi,
I am trying to deploy a connector rar from inside the ear on
Geronimo 1.1.1. The connector ra.xml file refers to all the classes like
the activationspec-class and so on. If I put the jar (containing all
these classes), just directly under the connector rar, the the ear is
deploying properly, but when I try to put the jar inside
deployable.ear\lib and mention the jar path in the manifest.mf of the
connector.rar (..\lib\classes.jar) ..it gives class not found (which is
there in the jar)
Rather that providing your own version of spec classes, I
recommend you use Geronimo's supplied specs via dependencies, instead.
What is the contents of your Manifest.mf? Have you tried this on
Geronimo 2.0.1?
--kevan
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended
solely for the use of the addressee(s). If you are not the intended
recipient, please notify the sender by e-mail and delete the original
message. Further, you are not to copy, disclose, or distribute this
e-mail or its contents to any other person and any such actions are
unlawful. This e-mail may contain viruses. Infosys has taken every
reasonable precaution to minimize this risk, but is not liable for any
damage you may sustain as a result of any virus in this e-mail. You
should carry out your own virus checks before opening the e-mail or
attachment. Infosys reserves the right to monitor and review the content
of all messages sent to or from this e-mail address. Messages sent to or
from this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
RE: manifest classloader issue
Posted by Anshuk Chinmoy Pal Chaudhuri <An...@infosys.com>.
Hi David,
Yeah..you are spot on..it worked in g 1.1.1 by the lib/classes.jar
Thanks a lot.
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: David Jencks [mailto:david_jencks@yahoo.com]
Sent: Thursday, September 06, 2007 8:54 PM
To: user@geronimo.apache.org
Subject: Re: manifest classloader issue
On Sep 6, 2007, at 8:18 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
Hi Kevin,
I did try on Geronimo 2.0.1, it did work on that, but I have to make it
work on 1.1.1. Is there any workaround?
I think it worked on 2.0.1 because anything in the ear lib directory
(lib by default) is added to the ear classloader, not because of your
manifest classpath entry which I think should be lib/classes.jar.
thanks
david jencks
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: Anshuk Chinmoy Pal Chaudhuri
[mailto:Anshuk_PalChaudhuri@infosys.com]
Sent: Thursday, September 06, 2007 8:25 PM
To: user@geronimo.apache.org
Subject: RE: manifest classloader issue
Hi Kevin,
I will definitely take care of your request going further on.
Manifest.mf content
Manifest-Version: 1.0
Class-Path: ../lib/classes.jar
No, I haven't tried on 2.0.1, we have to work on Geronimo 1.1.1,
that is what the requirement is.
Thanks.
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: Kevan Miller [mailto:kevan.miller@gmail.com]
Sent: Thursday, September 06, 2007 8:14 PM
To: user@geronimo.apache.org
Subject: Re: manifest classloader issue
Anshuk,
One request -- please use "New Message" to start a new email
thread, rather than using "Reply" and editing the subject.
More below...
On Sep 6, 2007, at 9:50 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
Hi,
I am trying to deploy a connector rar from inside the ear on
Geronimo 1.1.1. The connector ra.xml file refers to all the classes like
the activationspec-class and so on. If I put the jar (containing all
these classes), just directly under the connector rar, the the ear is
deploying properly, but when I try to put the jar inside
deployable.ear\lib and mention the jar path in the manifest.mf of the
connector.rar (..\lib\classes.jar) ..it gives class not found (which is
there in the jar)
Rather that providing your own version of spec classes, I
recommend you use Geronimo's supplied specs via dependencies, instead.
What is the contents of your Manifest.mf? Have you tried this on
Geronimo 2.0.1?
--kevan
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended
solely for the use of the addressee(s). If you are not the intended
recipient, please notify the sender by e-mail and delete the original
message. Further, you are not to copy, disclose, or distribute this
e-mail or its contents to any other person and any such actions are
unlawful. This e-mail may contain viruses. Infosys has taken every
reasonable precaution to minimize this risk, but is not liable for any
damage you may sustain as a result of any virus in this e-mail. You
should carry out your own virus checks before opening the e-mail or
attachment. Infosys reserves the right to monitor and review the content
of all messages sent to or from this e-mail address. Messages sent to or
from this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
Re: manifest classloader issue
Posted by David Jencks <da...@yahoo.com>.
On Sep 6, 2007, at 8:18 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
> Hi Kevin,
>
>
>
> I did try on Geronimo 2.0.1, it did work on that, but I have to
> make it work on 1.1.1. Is there any workaround?
I think it worked on 2.0.1 because anything in the ear lib directory
(lib by default) is added to the ear classloader, not because of your
manifest classpath entry which I think should be lib/classes.jar.
thanks
david jencks
>
>
> Warm Regards,
> Anshuk Pal Chaudhuri
>
> From: Anshuk Chinmoy Pal Chaudhuri
> [mailto:Anshuk_PalChaudhuri@infosys.com]
> Sent: Thursday, September 06, 2007 8:25 PM
> To: user@geronimo.apache.org
> Subject: RE: manifest classloader issue
>
>
>
> Hi Kevin,
>
>
>
> I will definitely take care of your request going further on.
>
>
>
> Manifest.mf content
>
>
>
> Manifest-Version: 1.0
>
> Class-Path: ../lib/classes.jar
>
>
>
> No, I haven’t tried on 2.0.1, we have to work on Geronimo 1.1.1,
> that is what the requirement is.
>
>
>
> Thanks.
>
> Warm Regards,
> Anshuk Pal Chaudhuri
>
> From: Kevan Miller [mailto:kevan.miller@gmail.com]
> Sent: Thursday, September 06, 2007 8:14 PM
> To: user@geronimo.apache.org
> Subject: Re: manifest classloader issue
>
>
>
> Anshuk,
>
> One request -- please use "New Message" to start a new email
> thread, rather than using "Reply" and editing the subject.
>
>
>
> More below...
>
>
>
> On Sep 6, 2007, at 9:50 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
>
>
>
> Hi,
>
>
>
> I am trying to deploy a connector rar from inside the ear on
> Geronimo 1.1.1. The connector ra.xml file refers to all the classes
> like the activationspec-class and so on. If I put the jar
> (containing all these classes), just directly under the connector
> rar, the the ear is deploying properly, but when I try to put the
> jar inside deployable.ear\lib and mention the jar path in the
> manifest.mf of the connector.rar (..\lib\classes.jar) ..it gives
> class not found (which is there in the jar)
>
> Rather that providing your own version of spec classes, I recommend
> you use Geronimo's supplied specs via dependencies, instead.
>
>
>
> What is the contents of your Manifest.mf? Have you tried this on
> Geronimo 2.0.1?
>
>
>
> --kevan
>
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION
> intended solely for the use of the addressee(s). If you are not the
> intended recipient, please notify the sender by e-mail and delete
> the original message. Further, you are not to copy, disclose, or
> distribute this e-mail or its contents to any other person and any
> such actions are unlawful. This e-mail may contain viruses. Infosys
> has taken every reasonable precaution to minimize this risk, but is
> not liable for any damage you may sustain as a result of any virus
> in this e-mail. You should carry out your own virus checks before
> opening the e-mail or attachment. Infosys reserves the right to
> monitor and review the content of all messages sent to or from this
> e-mail address. Messages sent to or from this e-mail address may be
> stored on the Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>
RE: manifest classloader issue
Posted by Anshuk Chinmoy Pal Chaudhuri <An...@infosys.com>.
Hi Kevin,
I did try on Geronimo 2.0.1, it did work on that, but I have to make it
work on 1.1.1. Is there any workaround?
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: Anshuk Chinmoy Pal Chaudhuri
[mailto:Anshuk_PalChaudhuri@infosys.com]
Sent: Thursday, September 06, 2007 8:25 PM
To: user@geronimo.apache.org
Subject: RE: manifest classloader issue
Hi Kevin,
I will definitely take care of your request going further on.
Manifest.mf content
Manifest-Version: 1.0
Class-Path: ../lib/classes.jar
No, I haven't tried on 2.0.1, we have to work on Geronimo 1.1.1, that is
what the requirement is.
Thanks.
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: Kevan Miller [mailto:kevan.miller@gmail.com]
Sent: Thursday, September 06, 2007 8:14 PM
To: user@geronimo.apache.org
Subject: Re: manifest classloader issue
Anshuk,
One request -- please use "New Message" to start a new email thread,
rather than using "Reply" and editing the subject.
More below...
On Sep 6, 2007, at 9:50 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
Hi,
I am trying to deploy a connector rar from inside the ear on Geronimo
1.1.1. The connector ra.xml file refers to all the classes like the
activationspec-class and so on. If I put the jar (containing all these
classes), just directly under the connector rar, the the ear is
deploying properly, but when I try to put the jar inside
deployable.ear\lib and mention the jar path in the manifest.mf of the
connector.rar (..\lib\classes.jar) ..it gives class not found (which is
there in the jar)
Rather that providing your own version of spec classes, I recommend you
use Geronimo's supplied specs via dependencies, instead.
What is the contents of your Manifest.mf? Have you tried this on
Geronimo 2.0.1?
--kevan
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended
solely for the use of the addressee(s). If you are not the intended
recipient, please notify the sender by e-mail and delete the original
message. Further, you are not to copy, disclose, or distribute this
e-mail or its contents to any other person and any such actions are
unlawful. This e-mail may contain viruses. Infosys has taken every
reasonable precaution to minimize this risk, but is not liable for any
damage you may sustain as a result of any virus in this e-mail. You
should carry out your own virus checks before opening the e-mail or
attachment. Infosys reserves the right to monitor and review the content
of all messages sent to or from this e-mail address. Messages sent to or
from this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
RE: manifest classloader issue
Posted by Anshuk Chinmoy Pal Chaudhuri <An...@infosys.com>.
Hi Kevin,
I will definitely take care of your request going further on.
Manifest.mf content
Manifest-Version: 1.0
Class-Path: ../lib/classes.jar
No, I haven't tried on 2.0.1, we have to work on Geronimo 1.1.1, that is
what the requirement is.
Thanks.
Warm Regards,
Anshuk Pal Chaudhuri
________________________________
From: Kevan Miller [mailto:kevan.miller@gmail.com]
Sent: Thursday, September 06, 2007 8:14 PM
To: user@geronimo.apache.org
Subject: Re: manifest classloader issue
Anshuk,
One request -- please use "New Message" to start a new email thread,
rather than using "Reply" and editing the subject.
More below...
On Sep 6, 2007, at 9:50 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
Hi,
I am trying to deploy a connector rar from inside the ear on Geronimo
1.1.1. The connector ra.xml file refers to all the classes like the
activationspec-class and so on. If I put the jar (containing all these
classes), just directly under the connector rar, the the ear is
deploying properly, but when I try to put the jar inside
deployable.ear\lib and mention the jar path in the manifest.mf of the
connector.rar (..\lib\classes.jar) ..it gives class not found (which is
there in the jar)
Rather that providing your own version of spec classes, I recommend you
use Geronimo's supplied specs via dependencies, instead.
What is the contents of your Manifest.mf? Have you tried this on
Geronimo 2.0.1?
--kevan
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
Re: manifest classloader issue
Posted by Kevan Miller <ke...@gmail.com>.
Anshuk,
One request -- please use "New Message" to start a new email thread,
rather than using "Reply" and editing the subject.
More below...
On Sep 6, 2007, at 9:50 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
> Hi,
>
>
>
> I am trying to deploy a connector rar from inside the ear on
> Geronimo 1.1.1. The connector ra.xml file refers to all the classes
> like the activationspec-class and so on. If I put the jar
> (containing all these classes), just directly under the connector
> rar, the the ear is deploying properly, but when I try to put the
> jar inside deployable.ear\lib and mention the jar path in the
> manifest.mf of the connector.rar (..\lib\classes.jar) ..it gives
> class not found (which is there in the jar)
Rather that providing your own version of spec classes, I recommend
you use Geronimo's supplied specs via dependencies, instead.
What is the contents of your Manifest.mf? Have you tried this on
Geronimo 2.0.1?
--kevan
Re: manifest classloader issue
Posted by David Jencks <da...@yahoo.com>.
On Sep 6, 2007, at 6:50 AM, Anshuk Chinmoy Pal Chaudhuri wrote:
> Hi,
>
>
>
> I am trying to deploy a connector rar from inside the ear on
> Geronimo 1.1.1. The connector ra.xml file refers to all the classes
> like the activationspec-class and so on. If I put the jar
> (containing all these classes), just directly under the connector
> rar, the the ear is deploying properly, but when I try to put the
> jar inside deployable.ear\lib and mention the jar path in the
> manifest.mf of the connector.rar (..\lib\classes.jar) ..it gives
> class not found (which is there in the jar)
>
>
I think the correct manifest classpath entry for the structure you
show below would be lib/classes.jar not ../lib/classes.jar. The
file name of the artifact containing the manifest.mf (connector.rar)
doesn't count when traversing the manifest classpath. I've gotten
confused about this several times :-) but hopefully g. 1.1.1 isn't
one of the places :-)
thanks
david jencks
> I have also tried to put the jar path in the manifest.mf of the
> deployable.ear à (.\lib\classes.jar), there is the same
> classnotfound problem.
>
>
>
> The structure which works fine:
>
>
>
> deployable.ear
>
> - Meta-Inf
>
> - Manifest.mf
>
> - connector.rar
>
> - Meta-Inf
>
> - Manifest.mf
>
> -classes.jar
>
>
>
> The structure which does not work fine:
>
>
>
> deployable.ear
>
>
>
> - Meta-Inf
>
> - Manifest.mf
>
> - connector.rar
>
> - Meta-Inf
>
> - Manifest.mf
>
> - lib
>
> - classes.jar
>
>
>
> Is there any workaround for this?
>
>
>
> Warm Regards,
> Anshuk Pal Chaudhuri
>
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION
> intended solely for the use of the addressee(s). If you are not the
> intended recipient, please notify the sender by e-mail and delete
> the original message. Further, you are not to copy, disclose, or
> distribute this e-mail or its contents to any other person and any
> such actions are unlawful. This e-mail may contain viruses. Infosys
> has taken every reasonable precaution to minimize this risk, but is
> not liable for any damage you may sustain as a result of any virus
> in this e-mail. You should carry out your own virus checks before
> opening the e-mail or attachment. Infosys reserves the right to
> monitor and review the content of all messages sent to or from this
> e-mail address. Messages sent to or from this e-mail address may be
> stored on the Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>