You are viewing a plain text version of this content. The canonical link for it is here.
Posted to reviews@impala.apache.org by "Aleksandr Efimov (Code Review)" <ge...@cloudera.org> on 2026/08/22 20:49:15 UTC

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Aleksandr Efimov has uploaded this change for review. ( http://gerrit.cloudera.org:8080/24723


Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................

IMPALA-15280: Take referenced partitions from the final plan

HdfsScanNode registers its partitions with the descriptor table from
computeScanRangeLocations(), which runs while the scan's subtree is
being built. The descriptor table therefore describes every scan the
planner ever constructed, not the scans that ended up in the plan. A
subtree that is replaced afterwards leaves its partitions behind, and
toThrift() ships partition descriptors that nothing reads. The TODO
above the tuple descriptors in DescriptorTable.toThrift() already names
this situation.

Have each HdfsScanNode remember the ids it registered, and once the
plan is final, keep the union over the scans still reachable from the
plan fragments. Taking what the surviving scans registered, rather than
deriving the partitions again, is what makes this safe: HdfsScanNode is
the only caller of addReferencedPartition(), so the new set is by
construction a subset of the old one, it is the same set whenever every
scan that was built survives, and no scan can lose a partition it still
reads.

The walk covers every fragment, not the getFragmentsInPlanPreorder()
subset that createPlanExecInfo() uses: that one skips fragments reached
through a join build, and a scan below one of those still runs.

The EmptySetNode replacements on master - createScanNode() on conjuncts
implied false, the empty SPJ result set, dropped union operands - all
happen before the discarded side is planned, so no plan is expected to
change here. This is a prerequisite for IMPALA-7996, which replaces the
pruned input of a constant-false outer join after that input has been
built and trips PlannerTestBase.testHdfsPartitionsReferenced without
it.

Testing:
- PlannerTest, which asserts on every query that each partition in the
  descriptor table is covered by a scan range.

Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Assisted-by: claude-opus-5 (Claude Code)
---
M fe/src/main/java/org/apache/impala/analysis/DescriptorTable.java
M fe/src/main/java/org/apache/impala/planner/HdfsScanNode.java
M fe/src/main/java/org/apache/impala/planner/Planner.java
M fe/src/main/java/org/apache/impala/service/Frontend.java
4 files changed, 74 insertions(+), 0 deletions(-)



  git pull ssh://gerrit.cloudera.org:29418/Impala-ASF refs/changes/23/24723/1
-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 1
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 4: Verified+1


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 4
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Thu, 24 Sep 2026 08:47:31 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 1: Verified+1


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 1
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Comment-Date: Mon, 24 Aug 2026 21:35:07 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 4:

Build started: https://jenkins.impala.io/job/gerrit-verify-dryrun/14137/ DRY_RUN=true


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 4
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Thu, 24 Sep 2026 04:18:51 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 1:

Build started: https://jenkins.impala.io/job/gerrit-verify-dryrun/13911/ DRY_RUN=true


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 1
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Comment-Date: Mon, 24 Aug 2026 17:09:11 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 2: Verified+1


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Comment-Date: Wed, 09 Sep 2026 16:50:51 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 5:

Build started: https://jenkins.impala.io/job/gerrit-verify-dryrun/14147/ DRY_RUN=false


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 5
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Thu, 24 Sep 2026 17:43:56 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 5: Verified+1


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 5
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Thu, 24 Sep 2026 22:17:02 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 1:

Build Successful 

https://jenkins.impala.io/job/gerrit-code-review-checks/23720/ : Initial code review checks passed. Use gerrit-verify-dryrun-external or gerrit-verify-dryrun to run full precommit tests.


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 1
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Comment-Date: Sat, 22 Aug 2026 21:12:18 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Michael Smith (Code Review)" <ge...@cloudera.org>.
Michael Smith has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 2: Code-Review+1


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Thu, 17 Sep 2026 16:59:38 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has submitted this change and it was merged. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................

IMPALA-15280: Take referenced partitions from the final plan

HdfsScanNode registers its partitions with the descriptor table from
computeScanRangeLocations(), which runs while the scan's subtree is
being built. The descriptor table therefore describes every scan the
planner ever constructed, not the scans that ended up in the plan. A
subtree that is replaced afterwards leaves its partitions behind, and
toThrift() ships partition descriptors that nothing reads. The TODO
above the tuple descriptors in DescriptorTable.toThrift() already names
this situation.

Have each HdfsScanNode remember the ids it registered, and once the
plan is final, keep the union over the scans still reachable from the
plan fragments. Taking what the surviving scans registered, rather than
deriving the partitions again, is what makes this safe: HdfsScanNode is
the only caller of addReferencedPartition(), so the new set is by
construction a subset of the old one, it is the same set whenever every
scan that was built survives, and no scan can lose a partition it still
reads.

Deriving the partitions again from the scan would not give the same
answer. The loop in computeScanRangeLocations() walks
getSampledOrRawPartitions(), so a TABLESAMPLE scan registers the
sampled partitions and not partitions_, and a scan under a simple limit
leaves the loop once it has rows enough and never reaches the rest.
What each scan registered is the only record of what it asked for.

The walk covers every fragment, not the getFragmentsInPlanPreorder()
subset that createPlanExecInfo() uses: that one skips fragments reached
through a join build, and a scan below one of those still runs.

A table whose scans are all gone now ends up with an empty set rather
than the partitions its replaced scan had registered. That state is not
new: getReferencedPartitions() allocates an empty set for any table
toThrift() asks about, so a table whose tuple is still materialized
while nothing scans it already ships a descriptor with no partitions -
the situation the TODO above the tuple descriptors names. The backend
takes it today.

The EmptySetNode replacements on master - createScanNode() on conjuncts
implied false, the empty SPJ result set, dropped union operands - all
happen before the discarded side is planned, so no plan is expected to
change here. This is a prerequisite for IMPALA-7996, which replaces the
pruned input of a constant-false outer join after that input has been
built and trips PlannerTestBase.testHdfsPartitionsReferenced without
it.

Testing:
- PlannerTest, which asserts on every query that each partition in the
  descriptor table is covered by a scan range. PlannerTestBase used to
  check only the single-node plan and now checks the distributed and
  parallel plans too.

Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Assisted-by: claude-opus-5 (Claude Code)
Reviewed-on: http://gerrit.cloudera.org:8080/24723
Reviewed-by: Impala Public Jenkins <im...@cloudera.com>
Tested-by: Impala Public Jenkins <im...@cloudera.com>
---
M fe/src/main/java/org/apache/impala/analysis/DescriptorTable.java
M fe/src/main/java/org/apache/impala/planner/HdfsScanNode.java
M fe/src/main/java/org/apache/impala/planner/Planner.java
M fe/src/main/java/org/apache/impala/service/Frontend.java
M fe/src/test/java/org/apache/impala/planner/PlannerTestBase.java
5 files changed, 131 insertions(+), 15 deletions(-)

Approvals:
  Impala Public Jenkins: Looks good to me, approved; Verified

-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: merged
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 6
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 2:

Build Successful 

https://jenkins.impala.io/job/gerrit-code-review-checks/23866/ : Initial code review checks passed. Use gerrit-verify-dryrun-external or gerrit-verify-dryrun to run full precommit tests.


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Comment-Date: Mon, 31 Aug 2026 13:57:39 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 2:

Build started: https://jenkins.impala.io/job/gerrit-verify-dryrun/13996/ DRY_RUN=true


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Comment-Date: Tue, 08 Sep 2026 20:46:18 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Zoltan Borok-Nagy (Code Review)" <ge...@cloudera.org>.
Zoltan Borok-Nagy has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 4: Code-Review+2


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 4
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Thu, 24 Sep 2026 17:43:39 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 5: Code-Review+2


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 5
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Thu, 24 Sep 2026 17:43:55 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 2:

Build started: https://jenkins.impala.io/job/gerrit-verify-dryrun/13997/ DRY_RUN=true


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Comment-Date: Wed, 09 Sep 2026 12:29:13 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Aleksandr Efimov (Code Review)" <ge...@cloudera.org>.
Hello Aman Sinha, Quanlong Huang, Zoltan Borok-Nagy, Csaba Ringhofer, Michael Smith, Impala Public Jenkins, 

I'd like you to reexamine a change. Please visit

    http://gerrit.cloudera.org:8080/24723

to look at the new patch set (#3).

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................

IMPALA-15280: Take referenced partitions from the final plan

HdfsScanNode registers its partitions with the descriptor table from
computeScanRangeLocations(), which runs while the scan's subtree is
being built. The descriptor table therefore describes every scan the
planner ever constructed, not the scans that ended up in the plan. A
subtree that is replaced afterwards leaves its partitions behind, and
toThrift() ships partition descriptors that nothing reads. The TODO
above the tuple descriptors in DescriptorTable.toThrift() already names
this situation.

Have each HdfsScanNode remember the ids it registered, and once the
plan is final, keep the union over the scans still reachable from the
plan fragments. Taking what the surviving scans registered, rather than
deriving the partitions again, is what makes this safe: HdfsScanNode is
the only caller of addReferencedPartition(), so the new set is by
construction a subset of the old one, it is the same set whenever every
scan that was built survives, and no scan can lose a partition it still
reads.

Deriving the partitions again from the scan would not give the same
answer. The loop in computeScanRangeLocations() walks
getSampledOrRawPartitions(), so a TABLESAMPLE scan registers the
sampled partitions and not partitions_, and a scan under a simple limit
leaves the loop once it has rows enough and never reaches the rest.
What each scan registered is the only record of what it asked for.

The walk covers every fragment, not the getFragmentsInPlanPreorder()
subset that createPlanExecInfo() uses: that one skips fragments reached
through a join build, and a scan below one of those still runs.

A table whose scans are all gone now ends up with an empty set rather
than the partitions its replaced scan had registered. That state is not
new: getReferencedPartitions() allocates an empty set for any table
toThrift() asks about, so a table whose tuple is still materialized
while nothing scans it already ships a descriptor with no partitions -
the situation the TODO above the tuple descriptors names. The backend
takes it today.

The EmptySetNode replacements on master - createScanNode() on conjuncts
implied false, the empty SPJ result set, dropped union operands - all
happen before the discarded side is planned, so no plan is expected to
change here. This is a prerequisite for IMPALA-7996, which replaces the
pruned input of a constant-false outer join after that input has been
built and trips PlannerTestBase.testHdfsPartitionsReferenced without
it.

Testing:
- PlannerTest, which asserts on every query that each partition in the
  descriptor table is covered by a scan range. PlannerTestBase used to
  check only the single-node plan and now checks the distributed and
  parallel plans too.

Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Assisted-by: claude-opus-5 (Claude Code)
---
M fe/src/main/java/org/apache/impala/analysis/DescriptorTable.java
M fe/src/main/java/org/apache/impala/planner/HdfsScanNode.java
M fe/src/main/java/org/apache/impala/planner/Planner.java
M fe/src/main/java/org/apache/impala/service/Frontend.java
M fe/src/test/java/org/apache/impala/planner/PlannerTestBase.java
5 files changed, 131 insertions(+), 15 deletions(-)


  git pull ssh://gerrit.cloudera.org:29418/Impala-ASF refs/changes/23/24723/3
-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: newpatchset
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 3
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Zoltan Borok-Nagy (Code Review)" <ge...@cloudera.org>.
Zoltan Borok-Nagy has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 4: Code-Review+1

(1 comment)

http://gerrit.cloudera.org:8080/#/c/24723/4//COMMIT_MSG
Commit Message:

http://gerrit.cloudera.org:8080/#/c/24723/4//COMMIT_MSG@55
PS4, Line 55: each partition in the
            :   descriptor table is covered by a scan range
nit: And no scan range references a partition missing from the descriptor table?



-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 4
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Thu, 24 Sep 2026 08:47:48 +0000
Gerrit-HasComments: Yes

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Aleksandr Efimov (Code Review)" <ge...@cloudera.org>.
Aleksandr Efimov has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 4:

(1 comment)

http://gerrit.cloudera.org:8080/#/c/24723/4//COMMIT_MSG
Commit Message:

http://gerrit.cloudera.org:8080/#/c/24723/4//COMMIT_MSG@56
PS4, Line 56:   descriptor table is covered by a scan range. PlannerTestBase used to
> nit: And no scan range references a partition missing from the descriptor t
Yes, the test checks that too: findPartition() fails on a scan range whose partition is not in the descriptor table, and it now runs for all three plans.



-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 4
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Thu, 24 Sep 2026 09:23:01 +0000
Gerrit-HasComments: Yes

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Zoltan Borok-Nagy (Code Review)" <ge...@cloudera.org>.
Zoltan Borok-Nagy has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 2:

(1 comment)

Thanks for working on this!

http://gerrit.cloudera.org:8080/#/c/24723/2//COMMIT_MSG
Commit Message:

http://gerrit.cloudera.org:8080/#/c/24723/2//COMMIT_MSG@55
PS2, Line 55: PlannerTest, which asserts on every query that each partition in the
            :   descriptor table is covered by a scan range.
PlannerTest only runs these checks on the single-node plan. runTestCase() passes just the num_nodes=1 PLAN request to checkScanRangeLocations(), and it discards the DISTRIBUTEDPLAN and PARALLELPLANS requests. It would be nice to make PlannerTestBase.runTestCase() also check the partitions of the distributed/parallel plans.



-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Wed, 23 Sep 2026 12:22:46 +0000
Gerrit-HasComments: Yes

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Aleksandr Efimov (Code Review)" <ge...@cloudera.org>.
Aleksandr Efimov has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 2:

This one is the bottom of a two-change stack, and the change above it is waiting on it. 24597 came back Verified-1 twice, on PS5 and PS6, the run stopping on the descriptor-table check that this change removes; PS7 and PS8, both sitting on this change, came back Verified+1 on 23 and 31 August.

PS2 grew a subset check on the narrowing and two paragraphs of comment since you were added. Would you have time to look?


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Comment-Date: Mon, 07 Sep 2026 09:35:29 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 2: Verified-1

Build failed: https://jenkins.impala.io/job/gerrit-verify-dryrun/13996/


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Comment-Date: Wed, 09 Sep 2026 01:25:38 +0000
Gerrit-HasComments: No

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Aleksandr Efimov (Code Review)" <ge...@cloudera.org>.
Hello Aman Sinha, Csaba Ringhofer, Michael Smith, Impala Public Jenkins, 

I'd like you to reexamine a change. Please visit

    http://gerrit.cloudera.org:8080/24723

to look at the new patch set (#2).

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................

IMPALA-15280: Take referenced partitions from the final plan

HdfsScanNode registers its partitions with the descriptor table from
computeScanRangeLocations(), which runs while the scan's subtree is
being built. The descriptor table therefore describes every scan the
planner ever constructed, not the scans that ended up in the plan. A
subtree that is replaced afterwards leaves its partitions behind, and
toThrift() ships partition descriptors that nothing reads. The TODO
above the tuple descriptors in DescriptorTable.toThrift() already names
this situation.

Have each HdfsScanNode remember the ids it registered, and once the
plan is final, keep the union over the scans still reachable from the
plan fragments. Taking what the surviving scans registered, rather than
deriving the partitions again, is what makes this safe: HdfsScanNode is
the only caller of addReferencedPartition(), so the new set is by
construction a subset of the old one, it is the same set whenever every
scan that was built survives, and no scan can lose a partition it still
reads.

Deriving the partitions again from the scan would not give the same
answer. The loop in computeScanRangeLocations() walks
getSampledOrRawPartitions(), so a TABLESAMPLE scan registers the
sampled partitions and not partitions_, and a scan under a simple limit
leaves the loop once it has rows enough and never reaches the rest.
What each scan registered is the only record of what it asked for.

The walk covers every fragment, not the getFragmentsInPlanPreorder()
subset that createPlanExecInfo() uses: that one skips fragments reached
through a join build, and a scan below one of those still runs.

A table whose scans are all gone now ends up with an empty set rather
than the partitions its replaced scan had registered. That state is not
new: getReferencedPartitions() allocates an empty set for any table
toThrift() asks about, so a table whose tuple is still materialized
while nothing scans it already ships a descriptor with no partitions -
the situation the TODO above the tuple descriptors names. The backend
takes it today.

The EmptySetNode replacements on master - createScanNode() on conjuncts
implied false, the empty SPJ result set, dropped union operands - all
happen before the discarded side is planned, so no plan is expected to
change here. This is a prerequisite for IMPALA-7996, which replaces the
pruned input of a constant-false outer join after that input has been
built and trips PlannerTestBase.testHdfsPartitionsReferenced without
it.

Testing:
- PlannerTest, which asserts on every query that each partition in the
  descriptor table is covered by a scan range.

Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Assisted-by: claude-opus-5 (Claude Code)
---
M fe/src/main/java/org/apache/impala/analysis/DescriptorTable.java
M fe/src/main/java/org/apache/impala/planner/HdfsScanNode.java
M fe/src/main/java/org/apache/impala/planner/Planner.java
M fe/src/main/java/org/apache/impala/service/Frontend.java
4 files changed, 94 insertions(+), 0 deletions(-)


  git pull ssh://gerrit.cloudera.org:29418/Impala-ASF refs/changes/23/24723/2
-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: newpatchset
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Aleksandr Efimov (Code Review)" <ge...@cloudera.org>.
Aleksandr Efimov has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 2:

(1 comment)

http://gerrit.cloudera.org:8080/#/c/24723/2//COMMIT_MSG
Commit Message:

http://gerrit.cloudera.org:8080/#/c/24723/2//COMMIT_MSG@56
PS2, Line 56:   descriptor table is covered by a scan range.
> PlannerTest only runs these checks on the single-node plan. runTestCase() p
Done in PS3: the distributed and parallel plans are checked too.



-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 2
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Wed, 23 Sep 2026 17:18:59 +0000
Gerrit-HasComments: Yes

[Impala-ASF-CR] IMPALA-15280: Take referenced partitions from the final plan

Posted by "Impala Public Jenkins (Code Review)" <ge...@cloudera.org>.
Impala Public Jenkins has posted comments on this change. ( http://gerrit.cloudera.org:8080/24723 )

Change subject: IMPALA-15280: Take referenced partitions from the final plan
......................................................................


Patch Set 3:

Build Successful 

https://jenkins.impala.io/job/gerrit-code-review-checks/24153/ : Initial code review checks passed. Use gerrit-verify-dryrun-external or gerrit-verify-dryrun to run full precommit tests.


-- 
To view, visit http://gerrit.cloudera.org:8080/24723
To unsubscribe, visit http://gerrit.cloudera.org:8080/settings

Gerrit-Project: Impala-ASF
Gerrit-Branch: master
Gerrit-MessageType: comment
Gerrit-Change-Id: I553281e7c77e3297585360f37160bc3f9d69a208
Gerrit-Change-Number: 24723
Gerrit-PatchSet: 3
Gerrit-Owner: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aleksandr Efimov <dz...@gmail.com>
Gerrit-Reviewer: Aman Sinha <am...@cloudera.com>
Gerrit-Reviewer: Csaba Ringhofer <cs...@cloudera.com>
Gerrit-Reviewer: Impala Public Jenkins <im...@cloudera.com>
Gerrit-Reviewer: Michael Smith <mi...@cloudera.com>
Gerrit-Reviewer: Quanlong Huang <hu...@gmail.com>
Gerrit-Reviewer: Zoltan Borok-Nagy <bo...@cloudera.com>
Gerrit-Comment-Date: Wed, 23 Sep 2026 17:42:59 +0000
Gerrit-HasComments: No