You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by GitBox <gi...@apache.org> on 2018/06/18 21:16:58 UTC

[GitHub] utzig closed pull request #1201: [STM32] Remove Nucleo-F413RE

utzig closed pull request #1201: [STM32] Remove Nucleo-F413RE
URL: https://github.com/apache/mynewt-core/pull/1201
 
 
   

This is a PR merged from a forked repository.
As GitHub hides the original diff on merge, it is displayed below for
the sake of provenance:

As this is a foreign pull request (from a fork), the diff is supplied
below (as it won't show otherwise due to GitHub magic):

diff --git a/hw/bsp/nucleo-f413re/boot-nucleo-f413re.ld b/hw/bsp/nucleo-f413re/boot-nucleo-f413re.ld
deleted file mode 100644
index 54a0c8d516..0000000000
--- a/hw/bsp/nucleo-f413re/boot-nucleo-f413re.ld
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-
-/* Linker script to configure memory regions. */
-MEMORY
-{
-  FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 16K
-  CCM (rwx) : ORIGIN = 0x20040000, LENGTH = 64K
-  RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 256K
-}
-
-/* The bootloader does not contain an image header */
-_imghdr_size = 0x0;
diff --git a/hw/bsp/nucleo-f413re/bsp.yml b/hw/bsp/nucleo-f413re/bsp.yml
deleted file mode 100644
index 0aaa551aa9..0000000000
--- a/hw/bsp/nucleo-f413re/bsp.yml
+++ /dev/null
@@ -1,63 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#  http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-bsp.arch: cortex_m4
-bsp.compiler: compiler/arm-none-eabi-m4
-bsp.linkerscript:
-    - "hw/bsp/nucleo-f413re/nucleo-f413re.ld"
-    - "hw/mcu/stm/stm32f4xx/stm32f407.ld"
-bsp.linkerscript.BOOT_LOADER.OVERWRITE:
-    - "hw/bsp/nucleo-f413re/boot-nucleo-f413re.ld"
-    - "hw/mcu/stm/stm32f4xx/stm32f407.ld"
-bsp.downloadscript: "hw/bsp/nucleo-f413re/nucleo-f413re_download.sh"
-bsp.debugscript: "hw/bsp/nucleo-f413re/nucleo-f413re_debug.sh"
-bsp.downloadscript.WINDOWS.OVERWRITE: "hw/bsp/nucleo-f413re/nucleo-f413re_download.cmd"
-bsp.debugscript.WINDOWS.OVERWRITE: "hw/bsp/nucleo-f413re/nucleo-f413re_debug.cmd"
-
-bsp.flash_map:
-    areas:
-        # System areas.
-        FLASH_AREA_BOOTLOADER:
-            device: 0
-            offset: 0x08000000
-            size: 16kB
-        FLASH_AREA_IMAGE_0:
-            device: 0
-            offset: 0x08020000
-            size: 384kB
-        FLASH_AREA_IMAGE_1:
-            device: 0
-            offset: 0x08080000
-            size: 384kB
-        FLASH_AREA_IMAGE_SCRATCH:
-            device: 0
-            offset: 0x080e0000
-            size: 128kB
-
-        # User areas.
-        FLASH_AREA_REBOOT_LOG:
-            user_id: 0
-            device: 0
-            offset: 0x08004000
-            size: 16kB
-        FLASH_AREA_NFFS:
-            user_id: 1
-            device: 0
-            offset: 0x08008000
-            size: 32kB
diff --git a/hw/bsp/nucleo-f413re/include/bsp/bsp.h b/hw/bsp/nucleo-f413re/include/bsp/bsp.h
deleted file mode 100644
index 385b936a13..0000000000
--- a/hw/bsp/nucleo-f413re/include/bsp/bsp.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-#ifndef H_BSP_H
-#define H_BSP_H
-
-#include <inttypes.h>
-#include <mcu/mcu.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Define special stackos sections */
-#define sec_data_core   __attribute__((section(".data.core")))
-#define sec_bss_core    __attribute__((section(".bss.core")))
-#define sec_bss_nz_core __attribute__((section(".bss.core.nz")))
-
-/* More convenient section placement macros. */
-#define bssnz_t         sec_bss_nz_core
-
-extern uint8_t _ram_start;
-extern uint8_t _ccram_start;
-
-#define RAM_SIZE        (256 * 1024)
-#define CCRAM_SIZE      (64 * 1024)
-
-/* LED pins */
-#define LED_BLINK_PIN   MCU_GPIO_PORTA(5)
-
-/* UART */
-#define UART_CNT 1
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif  /* H_BSP_H */
diff --git a/hw/bsp/nucleo-f413re/include/bsp/stm32f4xx_hal_conf.h b/hw/bsp/nucleo-f413re/include/bsp/stm32f4xx_hal_conf.h
deleted file mode 100644
index 1ea1f320e9..0000000000
--- a/hw/bsp/nucleo-f413re/include/bsp/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,431 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf.h
-  * @author  MCD Application Team
-  * @version V1.2.4
-  * @date    06-May-2016
-  * @brief   HAL configuration file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-#if 0
-#define HAL_ADC_MODULE_ENABLED
-#define HAL_CAN_MODULE_ENABLED
-#define HAL_CRC_MODULE_ENABLED
-#define HAL_CRYP_MODULE_ENABLED
-#define HAL_DAC_MODULE_ENABLED
-#define HAL_DCMI_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED */
-#define HAL_ETH_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_NAND_MODULE_ENABLED
-#define HAL_NOR_MODULE_ENABLED
-#define HAL_PCCARD_MODULE_ENABLED
-#define HAL_SRAM_MODULE_ENABLED
-/* #define HAL_SDRAM_MODULE_ENABLED */
-#define HAL_HASH_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
-#define HAL_I2S_MODULE_ENABLED
-#define HAL_IWDG_MODULE_ENABLED
-#define HAL_LTDC_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_RNG_MODULE_ENABLED
-#define HAL_RTC_MODULE_ENABLED
-/* #define HAL_SAI_MODULE_ENABLED */
-#define HAL_SD_MODULE_ENABLED
-#define HAL_SPI_MODULE_ENABLED
-#define HAL_IRDA_MODULE_ENABLED
-#define HAL_SMARTCARD_MODULE_ENABLED
-#define HAL_WWDG_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-#define HAL_PCD_MODULE_ENABLED
-#define HAL_HCD_MODULE_ENABLED
-#else
-#define HAL_USART_MODULE_ENABLED
-#define HAL_UART_MODULE_ENABLED
-#define HAL_TIM_MODULE_ENABLED
-#define HAL_ADC_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
-#define HAL_IWDG_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_SPI_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-#endif
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000)
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0F) /*!< tick interrupt priority */
-#define  USE_RTOS                     0
-#define  PREFETCH_ENABLE              0 /* The prefetch will be enabled in SystemClock_Config(), depending on the used
-                                           STM32F405/415/07/417 device: RevA (prefetch must be off) or RevZ (prefetch can be on/off) */
-#define  INSTRUCTION_CACHE_ENABLE     1
-#define  DATA_CACHE_ENABLE            1
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2
-#define MAC_ADDR1   0
-#define MAC_ADDR2   0
-#define MAC_ADDR3   0
-#define MAC_ADDR4   0
-#define MAC_ADDR5   0
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)4)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)4)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848 PHY Address*/
-#define DP83848_PHY_ADDRESS             0x01
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x000000FF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x10)    /*!< PHY status register Offset                      */
-#define PHY_MICR                        ((uint16_t)0x11)    /*!< MII Interrupt Control Register                  */
-#define PHY_MISR                        ((uint16_t)0x12)    /*!< MII Interrupt Status and Misc. Control Register */
-
-#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
-
-#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
-#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
-
-#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020U)  /*!< Enable Interrupt on change of link status       */
-#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000U)  /*!< PHY link status interrupt mask                  */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     0U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/nucleo-f413re/nucleo-f413re.ld b/hw/bsp/nucleo-f413re/nucleo-f413re.ld
deleted file mode 100644
index af6266dde2..0000000000
--- a/hw/bsp/nucleo-f413re/nucleo-f413re.ld
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-
-/* Linker script for STM32F407 when running from flash and using the bootloader */
-
-/* Linker script to configure memory regions. */
-MEMORY
-{
-  FLASH (rx) :  ORIGIN = 0x08020000, LENGTH = 384K /* First image slot. */
-  CCM (rwx) :   ORIGIN = 0x20040000, LENGTH = 64K
-  RAM (rwx) :   ORIGIN = 0x20000000, LENGTH = 256K
-}
-
-/* This linker script is used for images and thus contains an image header */
-_imghdr_size = 0x20;
diff --git a/hw/bsp/nucleo-f413re/nucleo-f413re_debug.cmd b/hw/bsp/nucleo-f413re/nucleo-f413re_debug.cmd
deleted file mode 100755
index 96f0b26050..0000000000
--- a/hw/bsp/nucleo-f413re/nucleo-f413re_debug.cmd
+++ /dev/null
@@ -1,22 +0,0 @@
-@rem
-@rem Licensed to the Apache Software Foundation (ASF) under one
-@rem or more contributor license agreements.  See the NOTICE file
-@rem distributed with this work for additional information
-@rem regarding copyright ownership.  The ASF licenses this file
-@rem to you under the Apache License, Version 2.0 (the
-@rem "License"); you may not use this file except in compliance
-@rem with the License.  You may obtain a copy of the License at
-@rem
-@rem  http://www.apache.org/licenses/LICENSE-2.0
-@rem
-@rem Unless required by applicable law or agreed to in writing,
-@rem software distributed under the License is distributed on an
-@rem "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-@rem KIND, either express or implied.  See the License for the
-@rem specific language governing permissions and limitations
-@rem under the License.
-@rem
-
-@rem Execute a shell with a script of the same name and .sh extension
-
-@bash "%~dp0%~n0.sh"
diff --git a/hw/bsp/nucleo-f413re/nucleo-f413re_debug.sh b/hw/bsp/nucleo-f413re/nucleo-f413re_debug.sh
deleted file mode 100755
index 395efc743e..0000000000
--- a/hw/bsp/nucleo-f413re/nucleo-f413re_debug.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-# 
-#   http://www.apache.org/licenses/LICENSE-2.0
-# 
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# Called with following variables set:
-#  - CORE_PATH is absolute path to @apache-mynewt-core
-#  - BSP_PATH is absolute path to hw/bsp/bsp_name
-#  - BIN_BASENAME is the path to prefix to target binary,
-#    .elf appended to name is the ELF file
-#  - FEATURES holds the target features string
-#  - EXTRA_JTAG_CMD holds extra parameters to pass to jtag software
-#  - RESET set if target should be reset when attaching
-#  - NO_GDB set if we should not start gdb to debug
-#
-. $CORE_PATH/hw/scripts/stlink.sh
-
-FILE_NAME=$BIN_BASENAME.elf
-# Exit openocd when gdb detaches.
-
-stlink_debug
diff --git a/hw/bsp/nucleo-f413re/nucleo-f413re_download.cmd b/hw/bsp/nucleo-f413re/nucleo-f413re_download.cmd
deleted file mode 100755
index 96f0b26050..0000000000
--- a/hw/bsp/nucleo-f413re/nucleo-f413re_download.cmd
+++ /dev/null
@@ -1,22 +0,0 @@
-@rem
-@rem Licensed to the Apache Software Foundation (ASF) under one
-@rem or more contributor license agreements.  See the NOTICE file
-@rem distributed with this work for additional information
-@rem regarding copyright ownership.  The ASF licenses this file
-@rem to you under the Apache License, Version 2.0 (the
-@rem "License"); you may not use this file except in compliance
-@rem with the License.  You may obtain a copy of the License at
-@rem
-@rem  http://www.apache.org/licenses/LICENSE-2.0
-@rem
-@rem Unless required by applicable law or agreed to in writing,
-@rem software distributed under the License is distributed on an
-@rem "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-@rem KIND, either express or implied.  See the License for the
-@rem specific language governing permissions and limitations
-@rem under the License.
-@rem
-
-@rem Execute a shell with a script of the same name and .sh extension
-
-@bash "%~dp0%~n0.sh"
diff --git a/hw/bsp/nucleo-f413re/nucleo-f413re_download.sh b/hw/bsp/nucleo-f413re/nucleo-f413re_download.sh
deleted file mode 100755
index 14b94cef28..0000000000
--- a/hw/bsp/nucleo-f413re/nucleo-f413re_download.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-# 
-#   http://www.apache.org/licenses/LICENSE-2.0
-# 
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# Called with following variables set:
-#  - CORE_PATH is absolute path to @apache-mynewt-core
-#  - BSP_PATH is absolute path to hw/bsp/bsp_name
-#  - BIN_BASENAME is the path to prefix to target binary,
-#    .elf appended to name is the ELF file
-#  - IMAGE_SLOT is the image slot to download to (for non-mfg-image, non-boot)
-#  - FEATURES holds the target features string
-#  - EXTRA_JTAG_CMD holds extra parameters to pass to jtag software
-#  - MFG_IMAGE is "1" if this is a manufacturing image
-#  - FLASH_OFFSET contains the flash offset to download to
-#  - BOOT_LOADER is set if downloading a bootloader
-. $CORE_PATH/hw/scripts/stlink.sh
-
-if [ "$MFG_IMAGE" ]; then
-    FLASH_OFFSET=0x08000000
-fi
-
-common_file_to_load
-stlink_load 
diff --git a/hw/bsp/nucleo-f413re/pkg.yml b/hw/bsp/nucleo-f413re/pkg.yml
deleted file mode 100644
index a7ac251759..0000000000
--- a/hw/bsp/nucleo-f413re/pkg.yml
+++ /dev/null
@@ -1,42 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-# 
-#  http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-pkg.name: hw/bsp/nucleo-f413re
-pkg.type: bsp
-pkg.description: BSP definition for the stm32f4 nucleo f413re board.
-pkg.author: "Apache Mynewt <de...@mynewt.apache.org>"
-pkg.homepage: "http://mynewt.apache.org/"
-pkg.keywords:
-    - stm32
-    - stm32f4
-    - f413re
-    - stm32f413re
-    - nucleo
-
-pkg.cflags: -DSTM32F413xx
-
-pkg.cflags.HARDFLOAT:
-    - -mfloat-abi=hard -mfpu=fpv4-sp-d16
-
-pkg.deps:
-    - hw/mcu/stm/stm32f4xx
-    - libc/baselibc
-
-pkg.deps.UART_0:
-    - hw/drivers/uart/uart_hal
diff --git a/hw/bsp/nucleo-f413re/src/arch/cortex_m4/startup_STM32F40x.s b/hw/bsp/nucleo-f413re/src/arch/cortex_m4/startup_STM32F40x.s
deleted file mode 100644
index e84feac2a9..0000000000
--- a/hw/bsp/nucleo-f413re/src/arch/cortex_m4/startup_STM32F40x.s
+++ /dev/null
@@ -1,353 +0,0 @@
-/* File: startup_STM32F40x.S
- * Purpose: startup file for Cortex-M4 devices. Should use with
- *   GCC for ARM Embedded Processors
- * Version: V1.4
- * Date: 09 July 2012
- *
- * Copyright (c) 2011, 2012, ARM Limited
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in the
-      documentation and/or other materials provided with the distribution.
-    * Neither the name of the ARM Limited nor the
-      names of its contributors may be used to endorse or promote products
-      derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-    .syntax unified
-    .arch armv7-m
-
-    .section .stack
-    .align 3
-#ifdef __STACK_SIZE
-    .equ    Stack_Size, __STACK_SIZE
-#else
-    .equ    Stack_Size, 0xc00
-#endif
-    .globl    __StackTop
-    .globl    __StackLimit
-__StackLimit:
-    .space    Stack_Size
-    .size __StackLimit, . - __StackLimit
-__StackTop:
-    .size __StackTop, . - __StackTop
-
-    .section .heap
-    .align 3
-#ifdef __HEAP_SIZE
-    .equ    Heap_Size, __HEAP_SIZE
-#else
-    .equ    Heap_Size, 0
-#endif
-    .globl    __HeapBase
-    .globl    __HeapLimit
-__HeapBase:
-    .if    Heap_Size
-    .space    Heap_Size
-    .endif
-    .size __HeapBase, . - __HeapBase
-__HeapLimit:
-    .size __HeapLimit, . - __HeapLimit
-
-    .section .isr_vector
-    .align 2
-    .globl __isr_vector
-__isr_vector:
-    .long    __StackTop            /* Top of Stack */
-    .long    Reset_Handler         /* Reset Handler */
-    .long    NMI_Handler           /* NMI Handler */
-    .long    HardFault_Handler     /* Hard Fault Handler */
-    .long    MemManage_Handler     /* MPU Fault Handler */
-    .long    BusFault_Handler      /* Bus Fault Handler */
-    .long    UsageFault_Handler    /* Usage Fault Handler */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    SVC_Handler           /* SVCall Handler */
-    .long    DebugMon_Handler      /* Debug Monitor Handler */
-    .long    0                     /* Reserved */
-    .long    PendSV_Handler        /* PendSV Handler */
-    .long    SysTick_Handler       /* SysTick Handler */
-
-    /* External interrupts */
-    .long     WWDG_IRQHandler               /* Window WatchDog */
-    .long     PVD_IRQHandler                /* PVD through EXTI Line detection */
-    .long     TAMP_STAMP_IRQHandler         /* Tamper and TimeStamps through the EXTI line */
-    .long     RTC_WKUP_IRQHandler           /* RTC Wakeup through the EXTI line */
-    .long     FLASH_IRQHandler              /* FLASH */
-    .long     RCC_IRQHandler                /* RCC */
-    .long     EXTI0_IRQHandler              /* EXTI Line0 */
-    .long     EXTI1_IRQHandler              /* EXTI Line1 */
-    .long     EXTI2_IRQHandler              /* EXTI Line2 */
-    .long     EXTI3_IRQHandler              /* EXTI Line3 */
-    .long     EXTI4_IRQHandler              /* EXTI Line4 */
-    .long     DMA1_Stream0_IRQHandler       /* DMA1 Stream 0 */
-    .long     DMA1_Stream1_IRQHandler       /* DMA1 Stream 1 */
-    .long     DMA1_Stream2_IRQHandler       /* DMA1 Stream 2 */
-    .long     DMA1_Stream3_IRQHandler       /* DMA1 Stream 3 */
-    .long     DMA1_Stream4_IRQHandler       /* DMA1 Stream 4 */
-    .long     DMA1_Stream5_IRQHandler       /* DMA1 Stream 5 */
-    .long     DMA1_Stream6_IRQHandler       /* DMA1 Stream 6 */
-    .long     ADC_IRQHandler                /* ADC1, ADC2 and ADC3s */
-    .long     CAN1_TX_IRQHandler            /* CAN1 TX */
-    .long     CAN1_RX0_IRQHandler           /* CAN1 RX0 */
-    .long     CAN1_RX1_IRQHandler           /* CAN1 RX1 */
-    .long     CAN1_SCE_IRQHandler           /* CAN1 SCE */
-    .long     EXTI9_5_IRQHandler            /* External Line[9:5]s */
-    .long     TIM1_BRK_TIM9_IRQHandler      /* TIM1 Break and TIM9 */
-    .long     TIM1_UP_TIM10_IRQHandler      /* TIM1 Update and TIM10 */
-    .long     TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
-    .long     TIM1_CC_IRQHandler            /* TIM1 Capture Compare */
-    .long     TIM2_IRQHandler               /* TIM2 */
-    .long     TIM3_IRQHandler               /* TIM3 */
-    .long     TIM4_IRQHandler               /* TIM4 */
-    .long     I2C1_EV_IRQHandler            /* I2C1 Event */
-    .long     I2C1_ER_IRQHandler            /* I2C1 Error */
-    .long     I2C2_EV_IRQHandler            /* I2C2 Event */
-    .long     I2C2_ER_IRQHandler            /* I2C2 Error */
-    .long     SPI1_IRQHandler               /* SPI1 */
-    .long     SPI2_IRQHandler               /* SPI2 */
-    .long     USART1_IRQHandler             /* USART1 */
-    .long     USART2_IRQHandler             /* USART2 */
-    .long     USART3_IRQHandler             /* USART3 */
-    .long     EXTI15_10_IRQHandler          /* External Line[15:10]s */
-    .long     RTC_Alarm_IRQHandler          /* RTC Alarm (A and B) through EXTI Line */
-    .long     OTG_FS_WKUP_IRQHandler        /* USB OTG FS Wakeup through EXTI line */
-    .long     TIM8_BRK_TIM12_IRQHandler     /* TIM8 Break and TIM12 */
-    .long     TIM8_UP_TIM13_IRQHandler      /* TIM8 Update and TIM13 */
-    .long     TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
-    .long     TIM8_CC_IRQHandler            /* TIM8 Capture Compare */
-    .long     DMA1_Stream7_IRQHandler       /* DMA1 Stream7 */
-    .long     FSMC_IRQHandler               /* FSMC */
-    .long     SDIO_IRQHandler               /* SDIO */
-    .long     TIM5_IRQHandler               /* TIM5 */
-    .long     SPI3_IRQHandler               /* SPI3 */
-    .long     UART4_IRQHandler              /* UART4 */
-    .long     UART5_IRQHandler              /* UART5 */
-    .long     TIM6_DAC_IRQHandler           /* TIM6 and DAC1&2 underrun errors */
-    .long     TIM7_IRQHandler               /* TIM7 */
-    .long     DMA2_Stream0_IRQHandler       /* DMA2 Stream 0 */
-    .long     DMA2_Stream1_IRQHandler       /* DMA2 Stream 1 */
-    .long     DMA2_Stream2_IRQHandler       /* DMA2 Stream 2 */
-    .long     DMA2_Stream3_IRQHandler       /* DMA2 Stream 3 */
-    .long     DMA2_Stream4_IRQHandler       /* DMA2 Stream 4 */
-    .long     ETH_IRQHandler                /* Ethernet */
-    .long     ETH_WKUP_IRQHandler           /* Ethernet Wakeup through EXTI line */
-    .long     CAN2_TX_IRQHandler            /* CAN2 TX */
-    .long     CAN2_RX0_IRQHandler           /* CAN2 RX0 */
-    .long     CAN2_RX1_IRQHandler           /* CAN2 RX1 */
-    .long     CAN2_SCE_IRQHandler           /* CAN2 SCE */
-    .long     OTG_FS_IRQHandler             /* USB OTG FS */
-    .long     DMA2_Stream5_IRQHandler       /* DMA2 Stream 5 */
-    .long     DMA2_Stream6_IRQHandler       /* DMA2 Stream 6 */
-    .long     DMA2_Stream7_IRQHandler       /* DMA2 Stream 7 */
-    .long     USART6_IRQHandler             /* USART6 */
-    .long     I2C3_EV_IRQHandler            /* I2C3 event */
-    .long     I2C3_ER_IRQHandler            /* I2C3 error */
-    .long     OTG_HS_EP1_OUT_IRQHandler     /* USB OTG HS End Point 1 Out */
-    .long     OTG_HS_EP1_IN_IRQHandler      /* USB OTG HS End Point 1 In */
-    .long     OTG_HS_WKUP_IRQHandler        /* USB OTG HS Wakeup through EXTI */
-    .long     OTG_HS_IRQHandler             /* USB OTG HS */
-    .long     DCMI_IRQHandler               /* DCMI */
-    .long     CRYP_IRQHandler               /* CRYP crypto */
-    .long     HASH_RNG_IRQHandler           /* Hash and Rng */
-    .long     FPU_IRQHandler                /* FPU */
-
-    .size    __isr_vector, . - __isr_vector
-
-    .text
-    .thumb
-    .thumb_func
-    .align 2
-    .globl    Reset_Handler
-    .type    Reset_Handler, %function
-Reset_Handler:
-/* Copy data core section from flash to RAM */
-    ldr    r1, =__etext
-    ldr    r2, =__coredata_start__
-    ldr    r3, =__coredata_end__
-
-.LC0:
-    cmp     r2, r3
-    ittt    lt
-    ldrlt   r0, [r1], #4
-    strlt   r0, [r2], #4
-    blt    .LC0
-
-/*     Loop to copy data from read only memory to RAM. The ranges
- *      of copy from/to are specified by following symbols evaluated in
- *      linker script.
- *      __etext: End of code section, i.e., begin of data sections to copy from.
- *      __data_start__/__data_end__: RAM address range that data should be
- *      copied to. Both must be aligned to 4 bytes boundary.  */
-    ldr    r1, =__ecoredata
-    ldr    r2, =__data_start__
-    ldr    r3, =__data_end__
-
-.LC1:
-    cmp     r2, r3
-    ittt    lt
-    ldrlt   r0, [r1], #4
-    strlt   r0, [r2], #4
-    blt    .LC1
-
-/* Set the bss core section to zero */
-    mov     r0, #0
-    ldr     r1, =__corebss_start__
-    ldr     r2, =__corebss_end__
-
-.LC2:
-    cmp     r1, r2
-    itt     lt
-    strlt   r0, [r1], #4
-    blt    .LC2
-
-    /* Set the other bss section to zero as well*/
-    ldr     r1, =__bss_start__
-    ldr     r2, =__bss_end__
-
-.LC3:
-    cmp     r1, r2
-    itt     lt
-    strlt   r0, [r1], #4
-    blt    .LC3
-
-/* Call system initialization and startup routines */
-    ldr    r0, =SystemInit
-    blx    r0
-    ldr    r0, =_start
-    bx     r0
-    .pool
-    .size Reset_Handler, . - Reset_Handler
-
-    .text
-/*    Macro to define default handlers. Default handler
- *    will be weak symbol and just dead loops. They can be
- *    overwritten by other handlers */
-    .macro    def_default_handler    handler_name
-    .align 1
-    .thumb_func
-    .weak    \handler_name
-    .type    \handler_name, %function
-\handler_name :
-    b    .
-    .size    \handler_name, . - \handler_name
-    .endm
-
-    def_default_handler    NMI_Handler
-    def_default_handler    HardFault_Handler
-    def_default_handler    MemManage_Handler
-    def_default_handler    BusFault_Handler
-    def_default_handler    UsageFault_Handler
-    def_default_handler    SVC_Handler
-    def_default_handler    DebugMon_Handler
-    def_default_handler    PendSV_Handler
-    def_default_handler    SysTick_Handler
-    def_default_handler    Default_Handler
-
-    .macro    def_irq_default_handler    handler_name
-    .weak     \handler_name
-    .set      \handler_name, Default_Handler
-    .endm
-
-    def_irq_default_handler     WWDG_IRQHandler
-    def_irq_default_handler     PVD_IRQHandler
-    def_irq_default_handler     TAMP_STAMP_IRQHandler
-    def_irq_default_handler     RTC_WKUP_IRQHandler
-    def_irq_default_handler     FLASH_IRQHandler
-    def_irq_default_handler     RCC_IRQHandler
-    def_irq_default_handler     EXTI0_IRQHandler
-    def_irq_default_handler     EXTI1_IRQHandler
-    def_irq_default_handler     EXTI2_IRQHandler
-    def_irq_default_handler     EXTI3_IRQHandler
-    def_irq_default_handler     EXTI4_IRQHandler
-    def_irq_default_handler     DMA1_Stream0_IRQHandler
-    def_irq_default_handler     DMA1_Stream1_IRQHandler
-    def_irq_default_handler     DMA1_Stream2_IRQHandler
-    def_irq_default_handler     DMA1_Stream3_IRQHandler
-    def_irq_default_handler     DMA1_Stream4_IRQHandler
-    def_irq_default_handler     DMA1_Stream5_IRQHandler
-    def_irq_default_handler     DMA1_Stream6_IRQHandler
-    def_irq_default_handler     ADC_IRQHandler
-    def_irq_default_handler     CAN1_TX_IRQHandler
-    def_irq_default_handler     CAN1_RX0_IRQHandler
-    def_irq_default_handler     CAN1_RX1_IRQHandler
-    def_irq_default_handler     CAN1_SCE_IRQHandler
-    def_irq_default_handler     EXTI9_5_IRQHandler
-    def_irq_default_handler     TIM1_BRK_TIM9_IRQHandler
-    def_irq_default_handler     TIM1_UP_TIM10_IRQHandler
-    def_irq_default_handler     TIM1_TRG_COM_TIM11_IRQHandler
-    def_irq_default_handler     TIM1_CC_IRQHandler
-    def_irq_default_handler     TIM2_IRQHandler
-    def_irq_default_handler     TIM3_IRQHandler
-    def_irq_default_handler     TIM4_IRQHandler
-    def_irq_default_handler     I2C1_EV_IRQHandler
-    def_irq_default_handler     I2C1_ER_IRQHandler
-    def_irq_default_handler     I2C2_EV_IRQHandler
-    def_irq_default_handler     I2C2_ER_IRQHandler
-    def_irq_default_handler     SPI1_IRQHandler
-    def_irq_default_handler     SPI2_IRQHandler
-    def_irq_default_handler     USART1_IRQHandler
-    def_irq_default_handler     USART2_IRQHandler
-    def_irq_default_handler     USART3_IRQHandler
-    def_irq_default_handler     EXTI15_10_IRQHandler
-    def_irq_default_handler     RTC_Alarm_IRQHandler
-    def_irq_default_handler     OTG_FS_WKUP_IRQHandler
-    def_irq_default_handler     TIM8_BRK_TIM12_IRQHandler
-    def_irq_default_handler     TIM8_UP_TIM13_IRQHandler
-    def_irq_default_handler     TIM8_TRG_COM_TIM14_IRQHandler
-    def_irq_default_handler     TIM8_CC_IRQHandler
-    def_irq_default_handler     DMA1_Stream7_IRQHandler
-    def_irq_default_handler     FSMC_IRQHandler
-    def_irq_default_handler     SDIO_IRQHandler
-    def_irq_default_handler     TIM5_IRQHandler
-    def_irq_default_handler     SPI3_IRQHandler
-    def_irq_default_handler     UART4_IRQHandler
-    def_irq_default_handler     UART5_IRQHandler
-    def_irq_default_handler     TIM6_DAC_IRQHandler
-    def_irq_default_handler     TIM7_IRQHandler
-    def_irq_default_handler     DMA2_Stream0_IRQHandler
-    def_irq_default_handler     DMA2_Stream1_IRQHandler
-    def_irq_default_handler     DMA2_Stream2_IRQHandler
-    def_irq_default_handler     DMA2_Stream3_IRQHandler
-    def_irq_default_handler     DMA2_Stream4_IRQHandler
-    def_irq_default_handler     ETH_IRQHandler
-    def_irq_default_handler     ETH_WKUP_IRQHandler
-    def_irq_default_handler     CAN2_TX_IRQHandler
-    def_irq_default_handler     CAN2_RX0_IRQHandler
-    def_irq_default_handler     CAN2_RX1_IRQHandler
-    def_irq_default_handler     CAN2_SCE_IRQHandler
-    def_irq_default_handler     OTG_FS_IRQHandler
-    def_irq_default_handler     DMA2_Stream5_IRQHandler
-    def_irq_default_handler     DMA2_Stream6_IRQHandler
-    def_irq_default_handler     DMA2_Stream7_IRQHandler
-    def_irq_default_handler     USART6_IRQHandler
-    def_irq_default_handler     I2C3_EV_IRQHandler
-    def_irq_default_handler     I2C3_ER_IRQHandler
-    def_irq_default_handler     OTG_HS_EP1_OUT_IRQHandler
-    def_irq_default_handler     OTG_HS_EP1_IN_IRQHandler
-    def_irq_default_handler     OTG_HS_WKUP_IRQHandler
-    def_irq_default_handler     OTG_HS_IRQHandler
-    def_irq_default_handler     DCMI_IRQHandler
-    def_irq_default_handler     CRYP_IRQHandler
-    def_irq_default_handler     HASH_RNG_IRQHandler
-    def_irq_default_handler     FPU_IRQHandler
-    def_irq_default_handler     DEF_IRQHandler
-
-    .end
diff --git a/hw/bsp/nucleo-f413re/src/hal_bsp.c b/hw/bsp/nucleo-f413re/src/hal_bsp.c
deleted file mode 100644
index c3296f337c..0000000000
--- a/hw/bsp/nucleo-f413re/src/hal_bsp.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-
-#include <assert.h>
-
-#include "os/mynewt.h"
-
-#if MYNEWT_VAL(UART_0)
-#include <uart/uart.h>
-#include <uart_hal/uart_hal.h>
-#endif
-
-#include <hal/hal_bsp.h>
-#include <hal/hal_gpio.h>
-#include <hal/hal_flash_int.h>
-#include <hal/hal_timer.h>
-
-#include <stm32f4xx_hal_gpio_ex.h>
-#include "mcu/stm32_hal.h"
-#include <mcu/stm32f4_bsp.h>
-#include "mcu/stm32f4xx_mynewt_hal.h"
-#include "hal/hal_i2c.h"
-#include "hal/hal_spi.h"
-
-#include "bsp/bsp.h"
-
-const uint32_t stm32f4_flash_sectors[] = {
-    0x08000000,     /* 16kB */
-    0x08004000,     /* 16kB */
-    0x08008000,     /* 16kB */
-    0x0800c000,     /* 16kB */
-    0x08010000,     /* 64kB */
-    0x08020000,     /* 128kB */
-    0x08040000,     /* 128kB */
-    0x08060000,     /* 128kB */
-    0x08080000,     /* 128kB */
-    0x080a0000,     /* 128kB */
-    0x080c0000,     /* 128kB */
-    0x080e0000,     /* 128kB */
-    0x08100000,     /* 128kB */
-    0x08120000,     /* 128kB */
-    0x08140000,     /* 128kB */
-    0x08160000,     /* 128kB */
-    0x08180000,     /* End of flash */
-};
-
-const uint32_t STM32F4_FLASH_NUM_AREAS =
-    sizeof(stm32f4_flash_sectors) / sizeof(stm32f4_flash_sectors[0]);
-
-extern const struct hal_flash_funcs stm32f4_flash_funcs;
-
-const struct hal_flash stm32f4_flash_dev = {
-    .hf_itf = &stm32f4_flash_funcs,
-    .hf_base_addr = 0x08000000,
-    .hf_size = 1536 * 1024,
-    .hf_sector_cnt = STM32F4_FLASH_NUM_AREAS - 1,
-    .hf_align = 1
-};
-
-#if MYNEWT_VAL(UART_0)
-static struct uart_dev hal_uart0;
-
-static const struct stm32_uart_cfg uart_cfg[UART_CNT] = {
-    [0] = {
-        .suc_uart = USART2,
-        .suc_rcc_reg = &RCC->APB1ENR,
-        .suc_rcc_dev = RCC_APB1ENR_USART2EN,
-        .suc_pin_tx = MCU_GPIO_PORTA(2),	/* PA2 */
-        .suc_pin_rx = MCU_GPIO_PORTA(3),	/* PA3 */
-        .suc_pin_rts = -1,
-        .suc_pin_cts = -1,
-        .suc_pin_af = GPIO_AF7_USART2,
-        .suc_irqn = USART2_IRQn
-    }
-};
-#endif
-
-#if MYNEWT_VAL(I2C_0)
-static struct stm32_hal_i2c_cfg i2c_cfg0 = {
-    .hic_i2c = I2C1,
-    .hic_rcc_reg = &RCC->APB1ENR,
-    .hic_rcc_dev = RCC_APB1ENR_I2C1EN,
-    .hic_pin_sda = MCU_GPIO_PORTB(9),		/* PB9 */
-    .hic_pin_scl = MCU_GPIO_PORTB(8),		/* PB8 */
-    .hic_pin_af = GPIO_AF4_I2C1,
-    .hic_10bit = 0,
-    .hic_speed = 100000				/* 100kHz */
-};
-#endif
-
-#if MYNEWT_VAL(SPI_0_MASTER)
-/*
- * NOTE: Our HAL expects that the SS pin, if used, is treated as a gpio line
- * and is handled outside the SPI routines.
- */
-static const struct stm32_hal_spi_cfg os_bsp_spi0m_cfg = {
-    .sck_pin      = MCU_GPIO_PORTA(5),
-    .mosi_pin     = MCU_GPIO_PORTA(7),
-    .miso_pin     = MCU_GPIO_PORTA(6),
-    .irq_prio     = 2,
-};
-#endif
-
-#if MYNEWT_VAL(SPI_0_SLAVE)
-static const struct stm32_hal_spi_cfg os_bsp_spi0s_cfg = {
-    .sck_pin      = MCU_GPIO_PORTA(5),
-    .mosi_pin     = MCU_GPIO_PORTA(7),
-    .miso_pin     = MCU_GPIO_PORTA(6),
-    .ss_pin       = MCU_GPIO_PORTA(4),
-    .irq_prio     = 2,
-};
-#endif
-
-static const struct hal_bsp_mem_dump dump_cfg[] = {
-    [0] = {
-        .hbmd_start = &_ram_start,
-        .hbmd_size = RAM_SIZE
-    },
-    [1] = {
-        .hbmd_start = &_ccram_start,
-        .hbmd_size = CCRAM_SIZE
-    }
-};
-
-const struct hal_flash *
-hal_bsp_flash_dev(uint8_t id)
-{
-    /*
-     * Internal flash mapped to id 0.
-     */
-    if (id != 0) {
-        return NULL;
-    }
-    return &stm32f4_flash_dev;
-}
-
-const struct hal_bsp_mem_dump *
-hal_bsp_core_dump(int *area_cnt)
-{
-    *area_cnt = sizeof(dump_cfg) / sizeof(dump_cfg[0]);
-    return dump_cfg;
-}
-
-void
-hal_bsp_init(void)
-{
-    int rc;
-
-    (void)rc;
-
-#if MYNEWT_VAL(UART_0)
-    rc = os_dev_create((struct os_dev *) &hal_uart0, "uart0",
-      OS_DEV_INIT_PRIMARY, 0, uart_hal_init, (void *)&uart_cfg[0]);
-    assert(rc == 0);
-#endif
-#if MYNEWT_VAL(TIMER_0)
-    hal_timer_init(0, TIM9);
-#endif
-
-#if MYNEWT_VAL(I2C_0)
-    rc = hal_i2c_init(0, &i2c_cfg0);
-    assert(rc == 0);
-#endif
-
-#if MYNEWT_VAL(SPI_0_MASTER)
-    rc = hal_spi_init(0, (void *)&os_bsp_spi0m_cfg, HAL_SPI_TYPE_MASTER);
-    assert(rc == 0);
-#endif
-
-#if MYNEWT_VAL(SPI_0_SLAVE)
-    rc = hal_spi_init(0, (void *)&os_bsp_spi0s_cfg, HAL_SPI_TYPE_SLAVE);
-    assert(rc == 0);
-#endif
-}
-
-/**
- * Returns the configured priority for the given interrupt. If no priority
- * configured, return the priority passed in
- *
- * @param irq_num
- * @param pri
- *
- * @return uint32_t
- */
-uint32_t
-hal_bsp_get_nvic_priority(int irq_num, uint32_t pri)
-{
-    /* Add any interrupt priorities configured by the bsp here */
-    return pri;
-}
diff --git a/hw/bsp/nucleo-f413re/src/system_stm32f4xx.c b/hw/bsp/nucleo-f413re/src/system_stm32f4xx.c
deleted file mode 100644
index a2fa9c5dc4..0000000000
--- a/hw/bsp/nucleo-f413re/src/system_stm32f4xx.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    system_stm32f4xx.c
-  * @author  MCD Application Team
-  * @version V1.2.4
-  * @date    06-May-2016
-  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
-  *
-  *   This file provides two functions and one global variable to be called from
-  *   user application:
-  *      - SystemInit(): This function is called at startup just after reset and
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f4xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick
-  *                                  timer or configure other parameters.
-  *
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  *
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f4xx_system
-  * @{
-  */
-
-/** @addtogroup STM32F4xx_System_Private_Includes
-  * @{
-  */
-
-#include "stm32f4xx.h"
-#include "mcu/cmsis_nvic.h"
-
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_Defines
-  * @{
-  */
-
-/************************* Miscellaneous Configuration ************************/
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field.
-                                   This value must be a multiple of 0x200. */
-/******************************************************************************/
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_Variables
-  * @{
-  */
-  /* This variable is updated in three ways:
-      1) by calling CMSIS function SystemCoreClockUpdate()
-      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
-      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
-         Note: If you use this function to configure the system clock; then there
-               is no need to call the 2 first functions listed above, since SystemCoreClock
-               variable is updated automatically.
-  */
-  uint32_t SystemCoreClock = 16000000;
-  const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-  const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F4xx_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the FPU setting, vector table location and External memory
-  *         configuration.
-  * @param  None
-  * @retval None
-  */
-void SystemInit(void)
-{
-  /* FPU settings ------------------------------------------------------------*/
-  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
-    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
-  #endif
-  /* Reset the RCC clock configuration to the default reset state ------------*/
-  /* Set HSION bit */
-  RCC->CR |= (uint32_t)0x00000001;
-
-  /* Reset CFGR register */
-  RCC->CFGR = 0x00000000;
-
-  /* Reset HSEON, CSSON and PLLON bits */
-  RCC->CR &= (uint32_t)0xFEF6FFFF;
-
-  /* Reset PLLCFGR register */
-  RCC->PLLCFGR = 0x24003010;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= (uint32_t)0xFFFBFFFF;
-
-  /* Disable all interrupts */
-  RCC->CIR = 0x00000000;
-
-  /* Relocate the vector table */
-  NVIC_Relocate();
-}
-
-/**
-   * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.
-  *
-  * @note   - The system frequency computed by this function is not the real
-  *           frequency in the chip. It is calculated based on the predefined
-  *           constant and the selected clock source:
-  *
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
-  *
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
-  *
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
-  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
-  *
-  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
-  *             16 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.
-  *
-  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
-  *              depends on the application requirements), user has to ensure that HSE_VALUE
-  *              is same as the real frequency of the crystal used. Otherwise, this function
-  *              may have wrong result.
-  *
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  *
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate(void)
-{
-  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
-
-  /* Get SYSCLK source -------------------------------------------------------*/
-  tmp = RCC->CFGR & RCC_CFGR_SWS;
-
-  switch (tmp)
-  {
-    case 0x00:  /* HSI used as system clock source */
-      SystemCoreClock = HSI_VALUE;
-      break;
-    case 0x04:  /* HSE used as system clock source */
-      SystemCoreClock = HSE_VALUE;
-      break;
-    case 0x08:  /* PLL used as system clock source */
-
-      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
-         SYSCLK = PLL_VCO / PLL_P
-         */
-      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
-      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
-
-      if (pllsource != 0)
-      {
-        /* HSE used as PLL clock source */
-        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
-      }
-      else
-      {
-        /* HSI used as PLL clock source */
-        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
-      }
-
-      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
-      SystemCoreClock = pllvco/pllp;
-      break;
-    default:
-      SystemCoreClock = HSI_VALUE;
-      break;
-  }
-  /* Compute HCLK frequency --------------------------------------------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK frequency */
-  SystemCoreClock >>= tmp;
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/nucleo-f413re/syscfg.yml b/hw/bsp/nucleo-f413re/syscfg.yml
deleted file mode 100644
index 7d9521f7ae..0000000000
--- a/hw/bsp/nucleo-f413re/syscfg.yml
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-# 
-#  http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-syscfg.defs:
-    UART_0:
-        description: 'UART 0'
-        value:  1
-    TIMER_0:
-        description: 'Timer 0'
-        value:  1
-
-syscfg.vals:
-    REBOOT_LOG_FLASH_AREA: FLASH_AREA_REBOOT_LOG
-    CONFIG_FCB_FLASH_AREA: FLASH_AREA_NFFS
-    NFFS_FLASH_AREA: FLASH_AREA_NFFS
-    COREDUMP_FLASH_AREA: FLASH_AREA_IMAGE_1


 

----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on GitHub and use the
URL above to go to the specific comment.
 
For queries about this service, please contact Infrastructure at:
users@infra.apache.org


With regards,
Apache Git Services