You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Star Guo <st...@ceph.me> on 2014/12/09 07:56:25 UTC
答复: unable to test Network Throttling.
Hi,
There is a priority: the network rate of compute offering > the network rate of global configuration.
If you deploy on kvm host, you can use virsh command to dumpxml of the VM and focus on <interface> ... </interface>.
Best Regards,
Star Guo
-----邮件原件-----
发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
发送时间: 2014年12月9日 14:28
收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
主题: unable to test Network Throttling.
Hi all,
i have created one compute offering(2 CPU , 4 GB) and given the Network Rate as 1024 Mb/s, a VM is deployed from that compute offering and in global settings i didn't changed any Network Throttling Rate(default 200
Mb/s) and i'm unable to test the network bandwidth rate.
please suggest me how to test the bandwidth rate of the VM.
Regards,
Rajasekhar.
Re: unable to test Network Throttling.
Posted by Andrija Panic <an...@gmail.com>.
Jayapal, you are saying that network trrottling rate is NOT for ingress
traffic ? I'm not sure of this...?
On 10 December 2014 at 12:00, Prashant Kumar Mishra <
prashantkumar.mishra@citrix.com> wrote:
> Please check this https://issues.apache.org/jira/browse/CLOUDSTACK-2820
> Thanks
> Prashant
>
> -----Original Message-----
> From: Jayapal Reddy Uradi [mailto:jayapalreddy.uradi@citrix.com]
> Sent: Wednesday, December 10, 2014 2:37 PM
> To: <us...@cloudstack.apache.org>
> Cc: dev@cloudstack.apache.org
> Subject: Re: unable to test Network Throttling.
>
> Hi Rajashekar,
>
> >>>>> i'm unable to test the network bandwidth rate.
> Can you please explain what is the issue you are facing while testing.
> Is it not working as the value configured ?
>
> Network throttling is for egress traffic. In configuration it is Mbits/s
> but in hypervisor it is configured as MBytes/s. 1024 Mb/s is 128MB.
>
> Thanks,
> Jayapal
>
>
>
> On 10-Dec-2014, at 2:15 PM, Andrija Panic <an...@gmail.com>
> wrote:
>
> > I also examinded KVM thortling, and got 1/4 of the settings....
> > cloudstack always starts VM with same parameters, no matter what you
> > configure manually on KVM/Xen..
> >
> > On 10 December 2014 at 08:27, raja sekhar <ra...@gmail.com>
> wrote:
> >
> >> hi prasanth,
> >>
> >> In cloudstack i have given network rate as 1024Mb/s but in xencenter
> >> qos properties it is showing 25Mb/s for that VM.
> >>
> >> Andrija Panic/Prashant if i change the interface property(bandwidth)
> >> through xencenter or commandline process in
> >> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces
> >> .html
> >> ,
> >> if i shutdown the VM from cloudstack that VM wil be disabled from
> >> xencenter, when ever i start the VM, the qos value will be same or it
> >> will changed to 25Mb/s.
> >>
> >> waiting for your reply.
> >>
> >> Regards,
> >> Rajasekhar.
> >>
> >>
> >> On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
> >> prashantkumar.mishra@citrix.com> wrote:
> >>>
> >>> From the xencenter you can check interface property (look for QoS
> >>> settings) for that particular vm .
> >>>
> >>> -----Original Message-----
> >>> From: Andrija Panic [mailto:andrija.panic@gmail.com]
> >>> Sent: Tuesday, December 09, 2014 1:30 PM
> >>> To: dev@cloudstack.apache.org
> >>> Cc: users@cloudstack.apache.org
> >>> Subject: Re: 答复: unable to test Network Throttling.
> >>>
> >>> Recent reply from Vadim:
> >>>
> >> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces
> >> .html
> >>>
> >>> On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com>
> >> wrote:
> >>>
> >>>> Hi Star,
> >>>>
> >>>> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> >>>> how can i check the band width rate of the VM, is there any command
> >>>> for xenserver host?
> >>>>
> >>>> waiting for your reply.
> >>>>
> >>>> Regards,
> >>>> Rajasekhar.
> >>>>
> >>>> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> >>>>>
> >>>>> Hi,
> >>>>>
> >>>>> There is a priority: the network rate of compute offering > the
> >>>>> network rate of global configuration.
> >>>>> If you deploy on kvm host, you can use virsh command to dumpxml of
> >>>>> the VM and focus on <interface> ... </interface>.
> >>>>>
> >>>>> Best Regards,
> >>>>> Star Guo
> >>>>>
> >>>>> -----邮件原件-----
> >>>>> 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> >>>>> 发送时间: 2014年12月9日 14:28
> >>>>> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> >>>>> 主题: unable to test Network Throttling.
> >>>>>
> >>>>> Hi all,
> >>>>>
> >>>>> i have created one compute offering(2 CPU , 4 GB) and given the
> >>>>> Network Rate as 1024 Mb/s, a VM is deployed from that compute
> >>>>> offering and in global settings i didn't changed any Network
> >>>>> Throttling Rate(default 200
> >>>>> Mb/s) and i'm unable to test the network bandwidth rate.
> >>>>>
> >>>>> please suggest me how to test the bandwidth rate of the VM.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Regards,
> >>>>> Rajasekhar.
> >>>>>
> >>>>>
> >>>>
> >>>
> >>>
> >>>
> >>> --
> >>>
> >>> Andrija Panić
> >>>
> >>
> >
> >
> >
> > --
> >
> > Andrija Panić
>
>
--
Andrija Panić
Re: unable to test Network Throttling.
Posted by Andrija Panic <an...@gmail.com>.
Jayapal, you are saying that network trrottling rate is NOT for ingress
traffic ? I'm not sure of this...?
On 10 December 2014 at 12:00, Prashant Kumar Mishra <
prashantkumar.mishra@citrix.com> wrote:
> Please check this https://issues.apache.org/jira/browse/CLOUDSTACK-2820
> Thanks
> Prashant
>
> -----Original Message-----
> From: Jayapal Reddy Uradi [mailto:jayapalreddy.uradi@citrix.com]
> Sent: Wednesday, December 10, 2014 2:37 PM
> To: <us...@cloudstack.apache.org>
> Cc: dev@cloudstack.apache.org
> Subject: Re: unable to test Network Throttling.
>
> Hi Rajashekar,
>
> >>>>> i'm unable to test the network bandwidth rate.
> Can you please explain what is the issue you are facing while testing.
> Is it not working as the value configured ?
>
> Network throttling is for egress traffic. In configuration it is Mbits/s
> but in hypervisor it is configured as MBytes/s. 1024 Mb/s is 128MB.
>
> Thanks,
> Jayapal
>
>
>
> On 10-Dec-2014, at 2:15 PM, Andrija Panic <an...@gmail.com>
> wrote:
>
> > I also examinded KVM thortling, and got 1/4 of the settings....
> > cloudstack always starts VM with same parameters, no matter what you
> > configure manually on KVM/Xen..
> >
> > On 10 December 2014 at 08:27, raja sekhar <ra...@gmail.com>
> wrote:
> >
> >> hi prasanth,
> >>
> >> In cloudstack i have given network rate as 1024Mb/s but in xencenter
> >> qos properties it is showing 25Mb/s for that VM.
> >>
> >> Andrija Panic/Prashant if i change the interface property(bandwidth)
> >> through xencenter or commandline process in
> >> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces
> >> .html
> >> ,
> >> if i shutdown the VM from cloudstack that VM wil be disabled from
> >> xencenter, when ever i start the VM, the qos value will be same or it
> >> will changed to 25Mb/s.
> >>
> >> waiting for your reply.
> >>
> >> Regards,
> >> Rajasekhar.
> >>
> >>
> >> On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
> >> prashantkumar.mishra@citrix.com> wrote:
> >>>
> >>> From the xencenter you can check interface property (look for QoS
> >>> settings) for that particular vm .
> >>>
> >>> -----Original Message-----
> >>> From: Andrija Panic [mailto:andrija.panic@gmail.com]
> >>> Sent: Tuesday, December 09, 2014 1:30 PM
> >>> To: dev@cloudstack.apache.org
> >>> Cc: users@cloudstack.apache.org
> >>> Subject: Re: 答复: unable to test Network Throttling.
> >>>
> >>> Recent reply from Vadim:
> >>>
> >> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces
> >> .html
> >>>
> >>> On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com>
> >> wrote:
> >>>
> >>>> Hi Star,
> >>>>
> >>>> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> >>>> how can i check the band width rate of the VM, is there any command
> >>>> for xenserver host?
> >>>>
> >>>> waiting for your reply.
> >>>>
> >>>> Regards,
> >>>> Rajasekhar.
> >>>>
> >>>> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> >>>>>
> >>>>> Hi,
> >>>>>
> >>>>> There is a priority: the network rate of compute offering > the
> >>>>> network rate of global configuration.
> >>>>> If you deploy on kvm host, you can use virsh command to dumpxml of
> >>>>> the VM and focus on <interface> ... </interface>.
> >>>>>
> >>>>> Best Regards,
> >>>>> Star Guo
> >>>>>
> >>>>> -----邮件原件-----
> >>>>> 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> >>>>> 发送时间: 2014年12月9日 14:28
> >>>>> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> >>>>> 主题: unable to test Network Throttling.
> >>>>>
> >>>>> Hi all,
> >>>>>
> >>>>> i have created one compute offering(2 CPU , 4 GB) and given the
> >>>>> Network Rate as 1024 Mb/s, a VM is deployed from that compute
> >>>>> offering and in global settings i didn't changed any Network
> >>>>> Throttling Rate(default 200
> >>>>> Mb/s) and i'm unable to test the network bandwidth rate.
> >>>>>
> >>>>> please suggest me how to test the bandwidth rate of the VM.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Regards,
> >>>>> Rajasekhar.
> >>>>>
> >>>>>
> >>>>
> >>>
> >>>
> >>>
> >>> --
> >>>
> >>> Andrija Panić
> >>>
> >>
> >
> >
> >
> > --
> >
> > Andrija Panić
>
>
--
Andrija Panić
RE: unable to test Network Throttling.
Posted by Prashant Kumar Mishra <pr...@citrix.com>.
Please check this https://issues.apache.org/jira/browse/CLOUDSTACK-2820
Thanks
Prashant
-----Original Message-----
From: Jayapal Reddy Uradi [mailto:jayapalreddy.uradi@citrix.com]
Sent: Wednesday, December 10, 2014 2:37 PM
To: <us...@cloudstack.apache.org>
Cc: dev@cloudstack.apache.org
Subject: Re: unable to test Network Throttling.
Hi Rajashekar,
>>>>> i'm unable to test the network bandwidth rate.
Can you please explain what is the issue you are facing while testing.
Is it not working as the value configured ?
Network throttling is for egress traffic. In configuration it is Mbits/s but in hypervisor it is configured as MBytes/s. 1024 Mb/s is 128MB.
Thanks,
Jayapal
On 10-Dec-2014, at 2:15 PM, Andrija Panic <an...@gmail.com>
wrote:
> I also examinded KVM thortling, and got 1/4 of the settings....
> cloudstack always starts VM with same parameters, no matter what you
> configure manually on KVM/Xen..
>
> On 10 December 2014 at 08:27, raja sekhar <ra...@gmail.com> wrote:
>
>> hi prasanth,
>>
>> In cloudstack i have given network rate as 1024Mb/s but in xencenter
>> qos properties it is showing 25Mb/s for that VM.
>>
>> Andrija Panic/Prashant if i change the interface property(bandwidth)
>> through xencenter or commandline process in
>> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces
>> .html
>> ,
>> if i shutdown the VM from cloudstack that VM wil be disabled from
>> xencenter, when ever i start the VM, the qos value will be same or it
>> will changed to 25Mb/s.
>>
>> waiting for your reply.
>>
>> Regards,
>> Rajasekhar.
>>
>>
>> On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
>> prashantkumar.mishra@citrix.com> wrote:
>>>
>>> From the xencenter you can check interface property (look for QoS
>>> settings) for that particular vm .
>>>
>>> -----Original Message-----
>>> From: Andrija Panic [mailto:andrija.panic@gmail.com]
>>> Sent: Tuesday, December 09, 2014 1:30 PM
>>> To: dev@cloudstack.apache.org
>>> Cc: users@cloudstack.apache.org
>>> Subject: Re: 答复: unable to test Network Throttling.
>>>
>>> Recent reply from Vadim:
>>>
>> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces
>> .html
>>>
>>> On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com>
>> wrote:
>>>
>>>> Hi Star,
>>>>
>>>> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
>>>> how can i check the band width rate of the VM, is there any command
>>>> for xenserver host?
>>>>
>>>> waiting for your reply.
>>>>
>>>> Regards,
>>>> Rajasekhar.
>>>>
>>>> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> There is a priority: the network rate of compute offering > the
>>>>> network rate of global configuration.
>>>>> If you deploy on kvm host, you can use virsh command to dumpxml of
>>>>> the VM and focus on <interface> ... </interface>.
>>>>>
>>>>> Best Regards,
>>>>> Star Guo
>>>>>
>>>>> -----邮件原件-----
>>>>> 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
>>>>> 发送时间: 2014年12月9日 14:28
>>>>> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
>>>>> 主题: unable to test Network Throttling.
>>>>>
>>>>> Hi all,
>>>>>
>>>>> i have created one compute offering(2 CPU , 4 GB) and given the
>>>>> Network Rate as 1024 Mb/s, a VM is deployed from that compute
>>>>> offering and in global settings i didn't changed any Network
>>>>> Throttling Rate(default 200
>>>>> Mb/s) and i'm unable to test the network bandwidth rate.
>>>>>
>>>>> please suggest me how to test the bandwidth rate of the VM.
>>>>>
>>>>>
>>>>>
>>>>> Regards,
>>>>> Rajasekhar.
>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> Andrija Panić
>>>
>>
>
>
>
> --
>
> Andrija Panić
RE: unable to test Network Throttling.
Posted by Prashant Kumar Mishra <pr...@citrix.com>.
Please check this https://issues.apache.org/jira/browse/CLOUDSTACK-2820
Thanks
Prashant
-----Original Message-----
From: Jayapal Reddy Uradi [mailto:jayapalreddy.uradi@citrix.com]
Sent: Wednesday, December 10, 2014 2:37 PM
To: <us...@cloudstack.apache.org>
Cc: dev@cloudstack.apache.org
Subject: Re: unable to test Network Throttling.
Hi Rajashekar,
>>>>> i'm unable to test the network bandwidth rate.
Can you please explain what is the issue you are facing while testing.
Is it not working as the value configured ?
Network throttling is for egress traffic. In configuration it is Mbits/s but in hypervisor it is configured as MBytes/s. 1024 Mb/s is 128MB.
Thanks,
Jayapal
On 10-Dec-2014, at 2:15 PM, Andrija Panic <an...@gmail.com>
wrote:
> I also examinded KVM thortling, and got 1/4 of the settings....
> cloudstack always starts VM with same parameters, no matter what you
> configure manually on KVM/Xen..
>
> On 10 December 2014 at 08:27, raja sekhar <ra...@gmail.com> wrote:
>
>> hi prasanth,
>>
>> In cloudstack i have given network rate as 1024Mb/s but in xencenter
>> qos properties it is showing 25Mb/s for that VM.
>>
>> Andrija Panic/Prashant if i change the interface property(bandwidth)
>> through xencenter or commandline process in
>> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces
>> .html
>> ,
>> if i shutdown the VM from cloudstack that VM wil be disabled from
>> xencenter, when ever i start the VM, the qos value will be same or it
>> will changed to 25Mb/s.
>>
>> waiting for your reply.
>>
>> Regards,
>> Rajasekhar.
>>
>>
>> On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
>> prashantkumar.mishra@citrix.com> wrote:
>>>
>>> From the xencenter you can check interface property (look for QoS
>>> settings) for that particular vm .
>>>
>>> -----Original Message-----
>>> From: Andrija Panic [mailto:andrija.panic@gmail.com]
>>> Sent: Tuesday, December 09, 2014 1:30 PM
>>> To: dev@cloudstack.apache.org
>>> Cc: users@cloudstack.apache.org
>>> Subject: Re: 答复: unable to test Network Throttling.
>>>
>>> Recent reply from Vadim:
>>>
>> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces
>> .html
>>>
>>> On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com>
>> wrote:
>>>
>>>> Hi Star,
>>>>
>>>> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
>>>> how can i check the band width rate of the VM, is there any command
>>>> for xenserver host?
>>>>
>>>> waiting for your reply.
>>>>
>>>> Regards,
>>>> Rajasekhar.
>>>>
>>>> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> There is a priority: the network rate of compute offering > the
>>>>> network rate of global configuration.
>>>>> If you deploy on kvm host, you can use virsh command to dumpxml of
>>>>> the VM and focus on <interface> ... </interface>.
>>>>>
>>>>> Best Regards,
>>>>> Star Guo
>>>>>
>>>>> -----邮件原件-----
>>>>> 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
>>>>> 发送时间: 2014年12月9日 14:28
>>>>> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
>>>>> 主题: unable to test Network Throttling.
>>>>>
>>>>> Hi all,
>>>>>
>>>>> i have created one compute offering(2 CPU , 4 GB) and given the
>>>>> Network Rate as 1024 Mb/s, a VM is deployed from that compute
>>>>> offering and in global settings i didn't changed any Network
>>>>> Throttling Rate(default 200
>>>>> Mb/s) and i'm unable to test the network bandwidth rate.
>>>>>
>>>>> please suggest me how to test the bandwidth rate of the VM.
>>>>>
>>>>>
>>>>>
>>>>> Regards,
>>>>> Rajasekhar.
>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> Andrija Panić
>>>
>>
>
>
>
> --
>
> Andrija Panić
Re: unable to test Network Throttling.
Posted by Jayapal Reddy Uradi <ja...@citrix.com>.
Hi Rajashekar,
>>>>> i'm unable to test the network bandwidth rate.
Can you please explain what is the issue you are facing while testing.
Is it not working as the value configured ?
Network throttling is for egress traffic. In configuration it is Mbits/s
but in hypervisor it is configured as MBytes/s. 1024 Mb/s is 128MB.
Thanks,
Jayapal
On 10-Dec-2014, at 2:15 PM, Andrija Panic <an...@gmail.com>
wrote:
> I also examinded KVM thortling, and got 1/4 of the settings.... cloudstack
> always starts VM with same parameters, no matter what you configure
> manually on KVM/Xen..
>
> On 10 December 2014 at 08:27, raja sekhar <ra...@gmail.com> wrote:
>
>> hi prasanth,
>>
>> In cloudstack i have given network rate as 1024Mb/s but in xencenter qos
>> properties it is showing 25Mb/s for that VM.
>>
>> Andrija Panic/Prashant if i change the interface property(bandwidth)
>> through xencenter or commandline process in
>> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
>> ,
>> if i shutdown the VM from cloudstack that VM wil be disabled from
>> xencenter, when ever i start the VM, the qos value will be same or it will
>> changed to 25Mb/s.
>>
>> waiting for your reply.
>>
>> Regards,
>> Rajasekhar.
>>
>>
>> On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
>> prashantkumar.mishra@citrix.com> wrote:
>>>
>>> From the xencenter you can check interface property (look for QoS
>>> settings) for that particular vm .
>>>
>>> -----Original Message-----
>>> From: Andrija Panic [mailto:andrija.panic@gmail.com]
>>> Sent: Tuesday, December 09, 2014 1:30 PM
>>> To: dev@cloudstack.apache.org
>>> Cc: users@cloudstack.apache.org
>>> Subject: Re: 答复: unable to test Network Throttling.
>>>
>>> Recent reply from Vadim:
>>>
>> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
>>>
>>> On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com>
>> wrote:
>>>
>>>> Hi Star,
>>>>
>>>> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
>>>> how can i check the band width rate of the VM, is there any command
>>>> for xenserver host?
>>>>
>>>> waiting for your reply.
>>>>
>>>> Regards,
>>>> Rajasekhar.
>>>>
>>>> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> There is a priority: the network rate of compute offering > the
>>>>> network rate of global configuration.
>>>>> If you deploy on kvm host, you can use virsh command to dumpxml of
>>>>> the VM and focus on <interface> ... </interface>.
>>>>>
>>>>> Best Regards,
>>>>> Star Guo
>>>>>
>>>>> -----邮件原件-----
>>>>> 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
>>>>> 发送时间: 2014年12月9日 14:28
>>>>> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
>>>>> 主题: unable to test Network Throttling.
>>>>>
>>>>> Hi all,
>>>>>
>>>>> i have created one compute offering(2 CPU , 4 GB) and given the
>>>>> Network Rate as 1024 Mb/s, a VM is deployed from that compute
>>>>> offering and in global settings i didn't changed any Network
>>>>> Throttling Rate(default 200
>>>>> Mb/s) and i'm unable to test the network bandwidth rate.
>>>>>
>>>>> please suggest me how to test the bandwidth rate of the VM.
>>>>>
>>>>>
>>>>>
>>>>> Regards,
>>>>> Rajasekhar.
>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> Andrija Panić
>>>
>>
>
>
>
> --
>
> Andrija Panić
Re: unable to test Network Throttling.
Posted by Jayapal Reddy Uradi <ja...@citrix.com>.
Hi Rajashekar,
>>>>> i'm unable to test the network bandwidth rate.
Can you please explain what is the issue you are facing while testing.
Is it not working as the value configured ?
Network throttling is for egress traffic. In configuration it is Mbits/s
but in hypervisor it is configured as MBytes/s. 1024 Mb/s is 128MB.
Thanks,
Jayapal
On 10-Dec-2014, at 2:15 PM, Andrija Panic <an...@gmail.com>
wrote:
> I also examinded KVM thortling, and got 1/4 of the settings.... cloudstack
> always starts VM with same parameters, no matter what you configure
> manually on KVM/Xen..
>
> On 10 December 2014 at 08:27, raja sekhar <ra...@gmail.com> wrote:
>
>> hi prasanth,
>>
>> In cloudstack i have given network rate as 1024Mb/s but in xencenter qos
>> properties it is showing 25Mb/s for that VM.
>>
>> Andrija Panic/Prashant if i change the interface property(bandwidth)
>> through xencenter or commandline process in
>> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
>> ,
>> if i shutdown the VM from cloudstack that VM wil be disabled from
>> xencenter, when ever i start the VM, the qos value will be same or it will
>> changed to 25Mb/s.
>>
>> waiting for your reply.
>>
>> Regards,
>> Rajasekhar.
>>
>>
>> On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
>> prashantkumar.mishra@citrix.com> wrote:
>>>
>>> From the xencenter you can check interface property (look for QoS
>>> settings) for that particular vm .
>>>
>>> -----Original Message-----
>>> From: Andrija Panic [mailto:andrija.panic@gmail.com]
>>> Sent: Tuesday, December 09, 2014 1:30 PM
>>> To: dev@cloudstack.apache.org
>>> Cc: users@cloudstack.apache.org
>>> Subject: Re: 答复: unable to test Network Throttling.
>>>
>>> Recent reply from Vadim:
>>>
>> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
>>>
>>> On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com>
>> wrote:
>>>
>>>> Hi Star,
>>>>
>>>> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
>>>> how can i check the band width rate of the VM, is there any command
>>>> for xenserver host?
>>>>
>>>> waiting for your reply.
>>>>
>>>> Regards,
>>>> Rajasekhar.
>>>>
>>>> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> There is a priority: the network rate of compute offering > the
>>>>> network rate of global configuration.
>>>>> If you deploy on kvm host, you can use virsh command to dumpxml of
>>>>> the VM and focus on <interface> ... </interface>.
>>>>>
>>>>> Best Regards,
>>>>> Star Guo
>>>>>
>>>>> -----邮件原件-----
>>>>> 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
>>>>> 发送时间: 2014年12月9日 14:28
>>>>> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
>>>>> 主题: unable to test Network Throttling.
>>>>>
>>>>> Hi all,
>>>>>
>>>>> i have created one compute offering(2 CPU , 4 GB) and given the
>>>>> Network Rate as 1024 Mb/s, a VM is deployed from that compute
>>>>> offering and in global settings i didn't changed any Network
>>>>> Throttling Rate(default 200
>>>>> Mb/s) and i'm unable to test the network bandwidth rate.
>>>>>
>>>>> please suggest me how to test the bandwidth rate of the VM.
>>>>>
>>>>>
>>>>>
>>>>> Regards,
>>>>> Rajasekhar.
>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> Andrija Panić
>>>
>>
>
>
>
> --
>
> Andrija Panić
Re: 答复: unable to test Network Throttling.
Posted by Andrija Panic <an...@gmail.com>.
I also examinded KVM thortling, and got 1/4 of the settings.... cloudstack
always starts VM with same parameters, no matter what you configure
manually on KVM/Xen..
On 10 December 2014 at 08:27, raja sekhar <ra...@gmail.com> wrote:
> hi prasanth,
>
> In cloudstack i have given network rate as 1024Mb/s but in xencenter qos
> properties it is showing 25Mb/s for that VM.
>
> Andrija Panic/Prashant if i change the interface property(bandwidth)
> through xencenter or commandline process in
> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
> ,
> if i shutdown the VM from cloudstack that VM wil be disabled from
> xencenter, when ever i start the VM, the qos value will be same or it will
> changed to 25Mb/s.
>
> waiting for your reply.
>
> Regards,
> Rajasekhar.
>
>
> On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
> prashantkumar.mishra@citrix.com> wrote:
> >
> > From the xencenter you can check interface property (look for QoS
> > settings) for that particular vm .
> >
> > -----Original Message-----
> > From: Andrija Panic [mailto:andrija.panic@gmail.com]
> > Sent: Tuesday, December 09, 2014 1:30 PM
> > To: dev@cloudstack.apache.org
> > Cc: users@cloudstack.apache.org
> > Subject: Re: 答复: unable to test Network Throttling.
> >
> > Recent reply from Vadim:
> >
> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
> >
> > On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com>
> wrote:
> >
> > > Hi Star,
> > >
> > > Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> > > how can i check the band width rate of the VM, is there any command
> > > for xenserver host?
> > >
> > > waiting for your reply.
> > >
> > > Regards,
> > > Rajasekhar.
> > >
> > > On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> > > >
> > > > Hi,
> > > >
> > > > There is a priority: the network rate of compute offering > the
> > > > network rate of global configuration.
> > > > If you deploy on kvm host, you can use virsh command to dumpxml of
> > > > the VM and focus on <interface> ... </interface>.
> > > >
> > > > Best Regards,
> > > > Star Guo
> > > >
> > > > -----邮件原件-----
> > > > 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> > > > 发送时间: 2014年12月9日 14:28
> > > > 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> > > > 主题: unable to test Network Throttling.
> > > >
> > > > Hi all,
> > > >
> > > > i have created one compute offering(2 CPU , 4 GB) and given the
> > > > Network Rate as 1024 Mb/s, a VM is deployed from that compute
> > > > offering and in global settings i didn't changed any Network
> > > > Throttling Rate(default 200
> > > > Mb/s) and i'm unable to test the network bandwidth rate.
> > > >
> > > > please suggest me how to test the bandwidth rate of the VM.
> > > >
> > > >
> > > >
> > > > Regards,
> > > > Rajasekhar.
> > > >
> > > >
> > >
> >
> >
> >
> > --
> >
> > Andrija Panić
> >
>
--
Andrija Panić
Re: 答复: unable to test Network Throttling.
Posted by Andrija Panic <an...@gmail.com>.
I also examinded KVM thortling, and got 1/4 of the settings.... cloudstack
always starts VM with same parameters, no matter what you configure
manually on KVM/Xen..
On 10 December 2014 at 08:27, raja sekhar <ra...@gmail.com> wrote:
> hi prasanth,
>
> In cloudstack i have given network rate as 1024Mb/s but in xencenter qos
> properties it is showing 25Mb/s for that VM.
>
> Andrija Panic/Prashant if i change the interface property(bandwidth)
> through xencenter or commandline process in
> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
> ,
> if i shutdown the VM from cloudstack that VM wil be disabled from
> xencenter, when ever i start the VM, the qos value will be same or it will
> changed to 25Mb/s.
>
> waiting for your reply.
>
> Regards,
> Rajasekhar.
>
>
> On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
> prashantkumar.mishra@citrix.com> wrote:
> >
> > From the xencenter you can check interface property (look for QoS
> > settings) for that particular vm .
> >
> > -----Original Message-----
> > From: Andrija Panic [mailto:andrija.panic@gmail.com]
> > Sent: Tuesday, December 09, 2014 1:30 PM
> > To: dev@cloudstack.apache.org
> > Cc: users@cloudstack.apache.org
> > Subject: Re: 答复: unable to test Network Throttling.
> >
> > Recent reply from Vadim:
> >
> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
> >
> > On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com>
> wrote:
> >
> > > Hi Star,
> > >
> > > Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> > > how can i check the band width rate of the VM, is there any command
> > > for xenserver host?
> > >
> > > waiting for your reply.
> > >
> > > Regards,
> > > Rajasekhar.
> > >
> > > On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> > > >
> > > > Hi,
> > > >
> > > > There is a priority: the network rate of compute offering > the
> > > > network rate of global configuration.
> > > > If you deploy on kvm host, you can use virsh command to dumpxml of
> > > > the VM and focus on <interface> ... </interface>.
> > > >
> > > > Best Regards,
> > > > Star Guo
> > > >
> > > > -----邮件原件-----
> > > > 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> > > > 发送时间: 2014年12月9日 14:28
> > > > 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> > > > 主题: unable to test Network Throttling.
> > > >
> > > > Hi all,
> > > >
> > > > i have created one compute offering(2 CPU , 4 GB) and given the
> > > > Network Rate as 1024 Mb/s, a VM is deployed from that compute
> > > > offering and in global settings i didn't changed any Network
> > > > Throttling Rate(default 200
> > > > Mb/s) and i'm unable to test the network bandwidth rate.
> > > >
> > > > please suggest me how to test the bandwidth rate of the VM.
> > > >
> > > >
> > > >
> > > > Regards,
> > > > Rajasekhar.
> > > >
> > > >
> > >
> >
> >
> >
> > --
> >
> > Andrija Panić
> >
>
--
Andrija Panić
Re: 答复: unable to test Network Throttling.
Posted by raja sekhar <ra...@gmail.com>.
hi prasanth,
In cloudstack i have given network rate as 1024Mb/s but in xencenter qos
properties it is showing 25Mb/s for that VM.
Andrija Panic/Prashant if i change the interface property(bandwidth)
through xencenter or commandline process in
http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html ,
if i shutdown the VM from cloudstack that VM wil be disabled from
xencenter, when ever i start the VM, the qos value will be same or it will
changed to 25Mb/s.
waiting for your reply.
Regards,
Rajasekhar.
On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
prashantkumar.mishra@citrix.com> wrote:
>
> From the xencenter you can check interface property (look for QoS
> settings) for that particular vm .
>
> -----Original Message-----
> From: Andrija Panic [mailto:andrija.panic@gmail.com]
> Sent: Tuesday, December 09, 2014 1:30 PM
> To: dev@cloudstack.apache.org
> Cc: users@cloudstack.apache.org
> Subject: Re: 答复: unable to test Network Throttling.
>
> Recent reply from Vadim:
> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
>
> On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com> wrote:
>
> > Hi Star,
> >
> > Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> > how can i check the band width rate of the VM, is there any command
> > for xenserver host?
> >
> > waiting for your reply.
> >
> > Regards,
> > Rajasekhar.
> >
> > On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> > >
> > > Hi,
> > >
> > > There is a priority: the network rate of compute offering > the
> > > network rate of global configuration.
> > > If you deploy on kvm host, you can use virsh command to dumpxml of
> > > the VM and focus on <interface> ... </interface>.
> > >
> > > Best Regards,
> > > Star Guo
> > >
> > > -----邮件原件-----
> > > 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> > > 发送时间: 2014年12月9日 14:28
> > > 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> > > 主题: unable to test Network Throttling.
> > >
> > > Hi all,
> > >
> > > i have created one compute offering(2 CPU , 4 GB) and given the
> > > Network Rate as 1024 Mb/s, a VM is deployed from that compute
> > > offering and in global settings i didn't changed any Network
> > > Throttling Rate(default 200
> > > Mb/s) and i'm unable to test the network bandwidth rate.
> > >
> > > please suggest me how to test the bandwidth rate of the VM.
> > >
> > >
> > >
> > > Regards,
> > > Rajasekhar.
> > >
> > >
> >
>
>
>
> --
>
> Andrija Panić
>
Re: 答复: unable to test Network Throttling.
Posted by raja sekhar <ra...@gmail.com>.
hi prasanth,
In cloudstack i have given network rate as 1024Mb/s but in xencenter qos
properties it is showing 25Mb/s for that VM.
Andrija Panic/Prashant if i change the interface property(bandwidth)
through xencenter or commandline process in
http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html ,
if i shutdown the VM from cloudstack that VM wil be disabled from
xencenter, when ever i start the VM, the qos value will be same or it will
changed to 25Mb/s.
waiting for your reply.
Regards,
Rajasekhar.
On Tue, Dec 9, 2014 at 12:05 AM, Prashant Kumar Mishra <
prashantkumar.mishra@citrix.com> wrote:
>
> From the xencenter you can check interface property (look for QoS
> settings) for that particular vm .
>
> -----Original Message-----
> From: Andrija Panic [mailto:andrija.panic@gmail.com]
> Sent: Tuesday, December 09, 2014 1:30 PM
> To: dev@cloudstack.apache.org
> Cc: users@cloudstack.apache.org
> Subject: Re: 答复: unable to test Network Throttling.
>
> Recent reply from Vadim:
> http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
>
> On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com> wrote:
>
> > Hi Star,
> >
> > Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> > how can i check the band width rate of the VM, is there any command
> > for xenserver host?
> >
> > waiting for your reply.
> >
> > Regards,
> > Rajasekhar.
> >
> > On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> > >
> > > Hi,
> > >
> > > There is a priority: the network rate of compute offering > the
> > > network rate of global configuration.
> > > If you deploy on kvm host, you can use virsh command to dumpxml of
> > > the VM and focus on <interface> ... </interface>.
> > >
> > > Best Regards,
> > > Star Guo
> > >
> > > -----邮件原件-----
> > > 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> > > 发送时间: 2014年12月9日 14:28
> > > 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> > > 主题: unable to test Network Throttling.
> > >
> > > Hi all,
> > >
> > > i have created one compute offering(2 CPU , 4 GB) and given the
> > > Network Rate as 1024 Mb/s, a VM is deployed from that compute
> > > offering and in global settings i didn't changed any Network
> > > Throttling Rate(default 200
> > > Mb/s) and i'm unable to test the network bandwidth rate.
> > >
> > > please suggest me how to test the bandwidth rate of the VM.
> > >
> > >
> > >
> > > Regards,
> > > Rajasekhar.
> > >
> > >
> >
>
>
>
> --
>
> Andrija Panić
>
RE: 答复: unable to test Network Throttling.
Posted by Prashant Kumar Mishra <pr...@citrix.com>.
From the xencenter you can check interface property (look for QoS settings) for that particular vm .
-----Original Message-----
From: Andrija Panic [mailto:andrija.panic@gmail.com]
Sent: Tuesday, December 09, 2014 1:30 PM
To: dev@cloudstack.apache.org
Cc: users@cloudstack.apache.org
Subject: Re: 答复: unable to test Network Throttling.
Recent reply from Vadim:
http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com> wrote:
> Hi Star,
>
> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> how can i check the band width rate of the VM, is there any command
> for xenserver host?
>
> waiting for your reply.
>
> Regards,
> Rajasekhar.
>
> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> >
> > Hi,
> >
> > There is a priority: the network rate of compute offering > the
> > network rate of global configuration.
> > If you deploy on kvm host, you can use virsh command to dumpxml of
> > the VM and focus on <interface> ... </interface>.
> >
> > Best Regards,
> > Star Guo
> >
> > -----邮件原件-----
> > 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> > 发送时间: 2014年12月9日 14:28
> > 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> > 主题: unable to test Network Throttling.
> >
> > Hi all,
> >
> > i have created one compute offering(2 CPU , 4 GB) and given the
> > Network Rate as 1024 Mb/s, a VM is deployed from that compute
> > offering and in global settings i didn't changed any Network
> > Throttling Rate(default 200
> > Mb/s) and i'm unable to test the network bandwidth rate.
> >
> > please suggest me how to test the bandwidth rate of the VM.
> >
> >
> >
> > Regards,
> > Rajasekhar.
> >
> >
>
--
Andrija Panić
RE: 答复: unable to test Network Throttling.
Posted by Prashant Kumar Mishra <pr...@citrix.com>.
From the xencenter you can check interface property (look for QoS settings) for that particular vm .
-----Original Message-----
From: Andrija Panic [mailto:andrija.panic@gmail.com]
Sent: Tuesday, December 09, 2014 1:30 PM
To: dev@cloudstack.apache.org
Cc: users@cloudstack.apache.org
Subject: Re: 答复: unable to test Network Throttling.
Recent reply from Vadim:
http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com> wrote:
> Hi Star,
>
> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> how can i check the band width rate of the VM, is there any command
> for xenserver host?
>
> waiting for your reply.
>
> Regards,
> Rajasekhar.
>
> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> >
> > Hi,
> >
> > There is a priority: the network rate of compute offering > the
> > network rate of global configuration.
> > If you deploy on kvm host, you can use virsh command to dumpxml of
> > the VM and focus on <interface> ... </interface>.
> >
> > Best Regards,
> > Star Guo
> >
> > -----邮件原件-----
> > 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> > 发送时间: 2014年12月9日 14:28
> > 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> > 主题: unable to test Network Throttling.
> >
> > Hi all,
> >
> > i have created one compute offering(2 CPU , 4 GB) and given the
> > Network Rate as 1024 Mb/s, a VM is deployed from that compute
> > offering and in global settings i didn't changed any Network
> > Throttling Rate(default 200
> > Mb/s) and i'm unable to test the network bandwidth rate.
> >
> > please suggest me how to test the bandwidth rate of the VM.
> >
> >
> >
> > Regards,
> > Rajasekhar.
> >
> >
>
--
Andrija Panić
Re: 答复: unable to test Network Throttling.
Posted by Andrija Panic <an...@gmail.com>.
Recent reply from Vadim:
http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com> wrote:
> Hi Star,
>
> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> how can i check the band width rate of the VM, is there any command for
> xenserver host?
>
> waiting for your reply.
>
> Regards,
> Rajasekhar.
>
> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> >
> > Hi,
> >
> > There is a priority: the network rate of compute offering > the network
> > rate of global configuration.
> > If you deploy on kvm host, you can use virsh command to dumpxml of the VM
> > and focus on <interface> ... </interface>.
> >
> > Best Regards,
> > Star Guo
> >
> > -----邮件原件-----
> > 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> > 发送时间: 2014年12月9日 14:28
> > 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> > 主题: unable to test Network Throttling.
> >
> > Hi all,
> >
> > i have created one compute offering(2 CPU , 4 GB) and given the Network
> > Rate as 1024 Mb/s, a VM is deployed from that compute offering and in
> > global settings i didn't changed any Network Throttling Rate(default 200
> > Mb/s) and i'm unable to test the network bandwidth rate.
> >
> > please suggest me how to test the bandwidth rate of the VM.
> >
> >
> >
> > Regards,
> > Rajasekhar.
> >
> >
>
--
Andrija Panić
Re: 答复: unable to test Network Throttling.
Posted by Andrija Panic <an...@gmail.com>.
Recent reply from Vadim:
http://xmodulo.com/how-to-rate-limit-xenserver-vms-network-interfaces.html
On 9 December 2014 at 08:40, raja sekhar <ra...@gmail.com> wrote:
> Hi Star,
>
> Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
> how can i check the band width rate of the VM, is there any command for
> xenserver host?
>
> waiting for your reply.
>
> Regards,
> Rajasekhar.
>
> On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
> >
> > Hi,
> >
> > There is a priority: the network rate of compute offering > the network
> > rate of global configuration.
> > If you deploy on kvm host, you can use virsh command to dumpxml of the VM
> > and focus on <interface> ... </interface>.
> >
> > Best Regards,
> > Star Guo
> >
> > -----邮件原件-----
> > 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> > 发送时间: 2014年12月9日 14:28
> > 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> > 主题: unable to test Network Throttling.
> >
> > Hi all,
> >
> > i have created one compute offering(2 CPU , 4 GB) and given the Network
> > Rate as 1024 Mb/s, a VM is deployed from that compute offering and in
> > global settings i didn't changed any Network Throttling Rate(default 200
> > Mb/s) and i'm unable to test the network bandwidth rate.
> >
> > please suggest me how to test the bandwidth rate of the VM.
> >
> >
> >
> > Regards,
> > Rajasekhar.
> >
> >
>
--
Andrija Panić
Re: 答复: unable to test Network Throttling.
Posted by raja sekhar <ra...@gmail.com>.
Hi Star,
Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
how can i check the band width rate of the VM, is there any command for
xenserver host?
waiting for your reply.
Regards,
Rajasekhar.
On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
>
> Hi,
>
> There is a priority: the network rate of compute offering > the network
> rate of global configuration.
> If you deploy on kvm host, you can use virsh command to dumpxml of the VM
> and focus on <interface> ... </interface>.
>
> Best Regards,
> Star Guo
>
> -----邮件原件-----
> 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> 发送时间: 2014年12月9日 14:28
> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> 主题: unable to test Network Throttling.
>
> Hi all,
>
> i have created one compute offering(2 CPU , 4 GB) and given the Network
> Rate as 1024 Mb/s, a VM is deployed from that compute offering and in
> global settings i didn't changed any Network Throttling Rate(default 200
> Mb/s) and i'm unable to test the network bandwidth rate.
>
> please suggest me how to test the bandwidth rate of the VM.
>
>
>
> Regards,
> Rajasekhar.
>
>
Re: 答复: unable to test Network Throttling.
Posted by raja sekhar <ra...@gmail.com>.
Hi Star,
Thanks for your reply. I'm using XenServer 6.2 and cloudstack 4.3.1.
how can i check the band width rate of the VM, is there any command for
xenserver host?
waiting for your reply.
Regards,
Rajasekhar.
On Mon, Dec 8, 2014 at 10:56 PM, Star Guo <st...@ceph.me> wrote:
>
> Hi,
>
> There is a priority: the network rate of compute offering > the network
> rate of global configuration.
> If you deploy on kvm host, you can use virsh command to dumpxml of the VM
> and focus on <interface> ... </interface>.
>
> Best Regards,
> Star Guo
>
> -----邮件原件-----
> 发件人: raja sekhar [mailto:rajsekhar.467@gmail.com]
> 发送时间: 2014年12月9日 14:28
> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> 主题: unable to test Network Throttling.
>
> Hi all,
>
> i have created one compute offering(2 CPU , 4 GB) and given the Network
> Rate as 1024 Mb/s, a VM is deployed from that compute offering and in
> global settings i didn't changed any Network Throttling Rate(default 200
> Mb/s) and i'm unable to test the network bandwidth rate.
>
> please suggest me how to test the bandwidth rate of the VM.
>
>
>
> Regards,
> Rajasekhar.
>
>