You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@qpid.apache.org by Robbie Gemmell <ro...@gmail.com> on 2019/02/06 14:01:57 UTC
[VOTE] Release Apache Qpid Proton 0.27.0
Hi folks,
I have put together a spin for a Qpid Proton 0.27.0 release, please
give it a test out and vote accordingly.
The files can be grabbed from:
https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
The JIRAs assigned are:
https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
It is tagged as 0.27.0-rc1.
Regards,
Robbie
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Robbie Gemmell <ro...@gmail.com>.
I'm not sure if the 'next' there was aimed toward requesting for
0.27.0 via a respin, or its followup. Either way though, as it isnt a
regression and a fix isnt currently ready it can go into a 0.27.1 /
0.28.0 etc release as appropriate once a fix is available. Its its
essentially the same amount of work for me release wise to respin, and
respinning doesnt get that fix out any quicker but just delay the
completed changes waiting since the last release (which was some time
ago).
Robbie
On Fri, 8 Feb 2019 at 10:58, Chuck Rolke <cr...@redhat.com> wrote:
>
> I just filed https://issues.apache.org/jira/browse/PROTON-2005
>
> This is not a regression but it would be good to be included in the next release.
>
> ----- Original Message -----
> > From: "Robbie Gemmell" <ro...@gmail.com>
> > To: users@qpid.apache.org
> > Sent: Wednesday, February 6, 2019 9:01:57 AM
> > Subject: [VOTE] Release Apache Qpid Proton 0.27.0
> >
> > Hi folks,
> >
> > I have put together a spin for a Qpid Proton 0.27.0 release, please
> > give it a test out and vote accordingly.
> >
> > The files can be grabbed from:
> > https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
> >
> > The JIRAs assigned are:
> > https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
> >
> > It is tagged as 0.27.0-rc1.
> >
> > Regards,
> > Robbie
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> > For additional commands, e-mail: users-help@qpid.apache.org
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Chuck Rolke <cr...@redhat.com>.
I just filed https://issues.apache.org/jira/browse/PROTON-2005
This is not a regression but it would be good to be included in the next release.
----- Original Message -----
> From: "Robbie Gemmell" <ro...@gmail.com>
> To: users@qpid.apache.org
> Sent: Wednesday, February 6, 2019 9:01:57 AM
> Subject: [VOTE] Release Apache Qpid Proton 0.27.0
>
> Hi folks,
>
> I have put together a spin for a Qpid Proton 0.27.0 release, please
> give it a test out and vote accordingly.
>
> The files can be grabbed from:
> https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
>
> The JIRAs assigned are:
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
>
> It is tagged as 0.27.0-rc1.
>
> Regards,
> Robbie
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Robbie Gemmell <ro...@gmail.com>.
On Wed, 6 Feb 2019 at 14:01, Robbie Gemmell <ro...@gmail.com> wrote:
>
> Hi folks,
>
> I have put together a spin for a Qpid Proton 0.27.0 release, please
> give it a test out and vote accordingly.
>
> The files can be grabbed from:
> https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
>
> The JIRAs assigned are:
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
>
> It is tagged as 0.27.0-rc1.
>
> Regards,
> Robbie
+1
I checked things over as follows:
- Verified the signature and checksum files.
- Checked for LICENCE and NOTICE files in the archive.
- Ran the build+tests, did an install.
- Built Qpid Dispatch 1.5.0 and master agaisnt it and ran the tests.
- Built Qpid CPP 1.39.0 against it and ran the tests.
- Ran some client examples against the routers and broker.
Robbie
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Justin Ross <ju...@gmail.com>.
+1. I tested on Fedora 29 x64 using quiver and qtools. There were no test
failures for me.
On Wed, Feb 6, 2019 at 6:02 AM Robbie Gemmell <ro...@gmail.com>
wrote:
> Hi folks,
>
> I have put together a spin for a Qpid Proton 0.27.0 release, please
> give it a test out and vote accordingly.
>
> The files can be grabbed from:
> https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
>
> The JIRAs assigned are:
>
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
>
> It is tagged as 0.27.0-rc1.
>
> Regards,
> Robbie
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
>
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Robbie Gemmell <ro...@gmail.com>.
It doesnt seem like anyone has been able to reproduce this as yet, and
I do know of some RHEL6 test jobs with valgrind that seem to be ok.
Since you appear to see the same issue with 0.26.0 it also doesnt seem
to be a regression, so without further detail or another concrete
issue suggesting we stop then I currently intend to proceed with the
release if the vote is still passing tomorrow.
Robbie
On Thu, 7 Feb 2019 at 11:14, jeremy <je...@gmail.com> wrote:
>
> Hi Cliff
> Indeed, we have the same problem with 0.26.0. I'm afraid we weren't
> launching valgrind tests prior to 0.26.0 (-DENABLE_VALGRIND=FALSE). However,
> I don't see a reason why we shouldn't.
>
> - Red Hat Enterprise Linux Server release 6.4 (Santiago)
> - g++ 4.9.2
> - valgrind-3.10.1
>
> - Cmake 3.2.3 flags:
> -DCMAKE_C_COMPILER=/opt/rh/devtoolset-3/root/usr/bin/gcc
> -DCMAKE_CXX_COMPILER=/opt/rh/devtoolset-3/root/usr/bin/g++
> -DCMAKE_C_FLAGS="-m64 -D_REENTRANT"
> -DCMAKE_CXX_FLAGS="-m64 -D_REENTRANT -std=c++11"
> -DBUILD_PERL=FALSE
> -DBUILD_RUBY=FALSE
> -DSASL_IMPL=none
> -DBUILD_PYTHON=TRUE
> -DPYTHON_EXECUTABLE=/opt/rh/python27/root/usr/bin/python
> -DPYTHON_LIBRARY=/opt/rh/python27/root/usr/lib64/libpython2.7.so
> -DPYTHON_INCLUDE_DIR=/opt/rh/python27/root/usr/include/python2.7
> -DCMAKE_BUILD_TYPE=RelWithDebInfo
>
> Cheers
> Jeremy
>
>
>
> -----
> Cheers,
> Jeremy
> --
> Sent from: http://qpid.2158936.n2.nabble.com/Apache-Qpid-users-f2158936.html
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by jeremy <je...@gmail.com>.
Hi Cliff
Indeed, we have the same problem with 0.26.0. I'm afraid we weren't
launching valgrind tests prior to 0.26.0 (-DENABLE_VALGRIND=FALSE). However,
I don't see a reason why we shouldn't.
- Red Hat Enterprise Linux Server release 6.4 (Santiago)
- g++ 4.9.2
- valgrind-3.10.1
- Cmake 3.2.3 flags:
-DCMAKE_C_COMPILER=/opt/rh/devtoolset-3/root/usr/bin/gcc
-DCMAKE_CXX_COMPILER=/opt/rh/devtoolset-3/root/usr/bin/g++
-DCMAKE_C_FLAGS="-m64 -D_REENTRANT"
-DCMAKE_CXX_FLAGS="-m64 -D_REENTRANT -std=c++11"
-DBUILD_PERL=FALSE
-DBUILD_RUBY=FALSE
-DSASL_IMPL=none
-DBUILD_PYTHON=TRUE
-DPYTHON_EXECUTABLE=/opt/rh/python27/root/usr/bin/python
-DPYTHON_LIBRARY=/opt/rh/python27/root/usr/lib64/libpython2.7.so
-DPYTHON_INCLUDE_DIR=/opt/rh/python27/root/usr/include/python2.7
-DCMAKE_BUILD_TYPE=RelWithDebInfo
Cheers
Jeremy
-----
Cheers,
Jeremy
--
Sent from: http://qpid.2158936.n2.nabble.com/Apache-Qpid-users-f2158936.html
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Cliff Jansen <cl...@gmail.com>.
Hi Jeremy,
Thank you for your testing and report.
I am not seeing these errors on a variety of systems. Would you please tell me
- Your OS
- Compiler of choice
- cmake build arguments
??
Also, can you confirm whether you see similar or no errors from the
0.26.0 release?
Many thanks.
Cliff
On Wed, Feb 6, 2019 at 7:25 AM jeremy <je...@gmail.com> wrote:
>
> I have failing tests due to valgrind due to invalid memory manipulation:
>
> 10: ==29146== Invalid free() / delete / delete[] / realloc()
> 10: ==29146== at 0x4C273F0: free (vg_replace_malloc.c:446)
> 10: ==29146== by 0x5B897FA: free_mem (in /lib64/libc-2.12.so)
> 10: ==29146== by 0x5B89391: __libc_freeres (in /lib64/libc-2.12.so)
> 10: ==29146== by 0x4A2266D: _vgnU_freeres (vg_preloaded.c:62)
> 10: ==29146== by 0x5A7ED51: exit (in /lib64/libc-2.12.so)
> 10: ==29146== by 0x5A67CE3: (below main) (in /lib64/libc-2.12.so)
> 10: ==29146== Address 0x402c990 is not stack'd, malloc'd or (recently)
> free'd
> 10: ==29146==
> 10/24 Test #10: cpp-codec_test ...................***Failed 0.56 sec
>
> The failing tests are the following:
> 10 - cpp-codec_test (Failed)
> 11 - cpp-connection_driver_test (Failed)
> 12 - cpp-interop_test (Failed)
> 13 - cpp-message_test (Failed)
> 14 - cpp-map_test (Failed)
> 15 - cpp-scalar_test (Failed)
> 16 - cpp-value_test (Failed)
> 17 - cpp-container_test (Failed)
> 18 - cpp-reconnect_test (Failed)
> 19 - cpp-link_test (Failed)
> 20 - cpp-credit_test (Failed)
> 21 - cpp-url-test (Failed)
> 22 - cpp-example-container (Failed)
> 23 - cpp-example-container-ssl (Failed)
>
>
>
> -----
> Cheers,
> Jeremy
> --
> Sent from: http://qpid.2158936.n2.nabble.com/Apache-Qpid-users-f2158936.html
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by jeremy <je...@gmail.com>.
I have failing tests due to valgrind due to invalid memory manipulation:
10: ==29146== Invalid free() / delete / delete[] / realloc()
10: ==29146== at 0x4C273F0: free (vg_replace_malloc.c:446)
10: ==29146== by 0x5B897FA: free_mem (in /lib64/libc-2.12.so)
10: ==29146== by 0x5B89391: __libc_freeres (in /lib64/libc-2.12.so)
10: ==29146== by 0x4A2266D: _vgnU_freeres (vg_preloaded.c:62)
10: ==29146== by 0x5A7ED51: exit (in /lib64/libc-2.12.so)
10: ==29146== by 0x5A67CE3: (below main) (in /lib64/libc-2.12.so)
10: ==29146== Address 0x402c990 is not stack'd, malloc'd or (recently)
free'd
10: ==29146==
10/24 Test #10: cpp-codec_test ...................***Failed 0.56 sec
The failing tests are the following:
10 - cpp-codec_test (Failed)
11 - cpp-connection_driver_test (Failed)
12 - cpp-interop_test (Failed)
13 - cpp-message_test (Failed)
14 - cpp-map_test (Failed)
15 - cpp-scalar_test (Failed)
16 - cpp-value_test (Failed)
17 - cpp-container_test (Failed)
18 - cpp-reconnect_test (Failed)
19 - cpp-link_test (Failed)
20 - cpp-credit_test (Failed)
21 - cpp-url-test (Failed)
22 - cpp-example-container (Failed)
23 - cpp-example-container-ssl (Failed)
-----
Cheers,
Jeremy
--
Sent from: http://qpid.2158936.n2.nabble.com/Apache-Qpid-users-f2158936.html
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Robbie Gemmell <ro...@gmail.com>.
I tried the build on F29 and saw the same warning. Trying 0.26.0 this
also occurs, and so it seems it isn't a regression in this release,
but a newer GCC warning.
If I am understanding things correctly the warning is spurious in this
case, aiming to stop you using the source size while copying the
string into the destination not checking the destination size, but in
this case the destination was just allocated using the same size value
and so the length has effectively been checked.
Subsequent googling retured results of a change made to swig as a
result though: https://github.com/swig/swig/pull/1333
Robbie
On Thu, 7 Feb 2019 at 19:50, Ted Ross <tr...@redhat.com> wrote:
>
> +1 (assuming the below warning is not a blocker)
> Installed and ran tests on Fedora 29
> Tested against Qpid Dispatch Router
> -Ted
>
> On Thu, Feb 7, 2019 at 1:58 PM Ted Ross <tr...@redhat.com> wrote:
>
> > Should have added that I'm running on Fedora 29. The swig version is
> > swig-3.0.12-21.fc29.
> >
> > On Thu, Feb 7, 2019 at 1:56 PM Ted Ross <tr...@redhat.com> wrote:
> >
> >> Still testing, but I saw the following warning during the build. It
> >> appears to be in SWIG-generated code, so this might not be easy to address.
> >>
> >> [100%] Building C object
> >> python/CMakeFiles/_cproton.dir/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c.o
> >> /home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:
> >> In function ‘SWIG_Python_addvarlink’:
> >> /home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:23177:9:
> >> warning: ‘strncpy’ specified bound depends on the length of the source
> >> argument [-Wstringop-overflow=]
> >> strncpy(gv->name,name,size);
> >> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> /home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:23174:21:
> >> note: length computed here
> >> size_t size = strlen(name)+1;
> >> ^~~~~~~~~~~~
> >> This warning did not halt the build.
> >>
> >> -Ted
> >>
> >> On Thu, Feb 7, 2019 at 12:41 PM Roddie Kieley <rk...@gmail.com> wrote:
> >>
> >>> +1
> >>>
> >>> I checked out the 0.27.0-rc1 tag on a Fedora 29 box
> >>> - default cmake ../qpid-proton && cmake --build . && ctest -VV
> >>> - no failures
> >>> - ran all c examples
> >>> - ran all cpp examples w/exception of service_bus
> >>>
> >>> I checked out the 0.27.0-rc1 tag on a 10.11.6 OSX box with Xcode 7.3.1
> >>> - cmake -DCMAKE_OSX_DEPLOYMENT_TARGET=10.11 -DBUILD_RUBY=NO -DBUILD_GO=NO
> >>> -DRUNTIME_CHECK=OFF ../qpid-proton && cmake --build . && ctest -VV
> >>> - no failures
> >>> - ran all c examples
> >>> - ran a selection of cpp examples
> >>>
> >>> On Wed, Feb 6, 2019 at 10:32 AM Robbie Gemmell <robbie.gemmell@gmail.com
> >>> >
> >>> wrote:
> >>>
> >>> > Hi folks,
> >>> >
> >>> > I have put together a spin for a Qpid Proton 0.27.0 release, please
> >>> > give it a test out and vote accordingly.
> >>> >
> >>> > The files can be grabbed from:
> >>> > https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
> >>> >
> >>> > The JIRAs assigned are:
> >>> >
> >>> >
> >>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
> >>> >
> >>> > It is tagged as 0.27.0-rc1.
> >>> >
> >>> > Regards,
> >>> > Robbie
> >>> >
> >>> > ---------------------------------------------------------------------
> >>> > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> >>> > For additional commands, e-mail: users-help@qpid.apache.org
> >>> >
> >>> >
> >>>
> >>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Ted Ross <tr...@redhat.com>.
+1 (assuming the below warning is not a blocker)
Installed and ran tests on Fedora 29
Tested against Qpid Dispatch Router
-Ted
On Thu, Feb 7, 2019 at 1:58 PM Ted Ross <tr...@redhat.com> wrote:
> Should have added that I'm running on Fedora 29. The swig version is
> swig-3.0.12-21.fc29.
>
> On Thu, Feb 7, 2019 at 1:56 PM Ted Ross <tr...@redhat.com> wrote:
>
>> Still testing, but I saw the following warning during the build. It
>> appears to be in SWIG-generated code, so this might not be easy to address.
>>
>> [100%] Building C object
>> python/CMakeFiles/_cproton.dir/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c.o
>> /home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:
>> In function ‘SWIG_Python_addvarlink’:
>> /home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:23177:9:
>> warning: ‘strncpy’ specified bound depends on the length of the source
>> argument [-Wstringop-overflow=]
>> strncpy(gv->name,name,size);
>> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> /home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:23174:21:
>> note: length computed here
>> size_t size = strlen(name)+1;
>> ^~~~~~~~~~~~
>> This warning did not halt the build.
>>
>> -Ted
>>
>> On Thu, Feb 7, 2019 at 12:41 PM Roddie Kieley <rk...@gmail.com> wrote:
>>
>>> +1
>>>
>>> I checked out the 0.27.0-rc1 tag on a Fedora 29 box
>>> - default cmake ../qpid-proton && cmake --build . && ctest -VV
>>> - no failures
>>> - ran all c examples
>>> - ran all cpp examples w/exception of service_bus
>>>
>>> I checked out the 0.27.0-rc1 tag on a 10.11.6 OSX box with Xcode 7.3.1
>>> - cmake -DCMAKE_OSX_DEPLOYMENT_TARGET=10.11 -DBUILD_RUBY=NO -DBUILD_GO=NO
>>> -DRUNTIME_CHECK=OFF ../qpid-proton && cmake --build . && ctest -VV
>>> - no failures
>>> - ran all c examples
>>> - ran a selection of cpp examples
>>>
>>> On Wed, Feb 6, 2019 at 10:32 AM Robbie Gemmell <robbie.gemmell@gmail.com
>>> >
>>> wrote:
>>>
>>> > Hi folks,
>>> >
>>> > I have put together a spin for a Qpid Proton 0.27.0 release, please
>>> > give it a test out and vote accordingly.
>>> >
>>> > The files can be grabbed from:
>>> > https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
>>> >
>>> > The JIRAs assigned are:
>>> >
>>> >
>>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
>>> >
>>> > It is tagged as 0.27.0-rc1.
>>> >
>>> > Regards,
>>> > Robbie
>>> >
>>> > ---------------------------------------------------------------------
>>> > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
>>> > For additional commands, e-mail: users-help@qpid.apache.org
>>> >
>>> >
>>>
>>
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Ted Ross <tr...@redhat.com>.
Should have added that I'm running on Fedora 29. The swig version is
swig-3.0.12-21.fc29.
On Thu, Feb 7, 2019 at 1:56 PM Ted Ross <tr...@redhat.com> wrote:
> Still testing, but I saw the following warning during the build. It
> appears to be in SWIG-generated code, so this might not be easy to address.
>
> [100%] Building C object
> python/CMakeFiles/_cproton.dir/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c.o
> /home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:
> In function ‘SWIG_Python_addvarlink’:
> /home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:23177:9:
> warning: ‘strncpy’ specified bound depends on the length of the source
> argument [-Wstringop-overflow=]
> strncpy(gv->name,name,size);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> /home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:23174:21:
> note: length computed here
> size_t size = strlen(name)+1;
> ^~~~~~~~~~~~
> This warning did not halt the build.
>
> -Ted
>
> On Thu, Feb 7, 2019 at 12:41 PM Roddie Kieley <rk...@gmail.com> wrote:
>
>> +1
>>
>> I checked out the 0.27.0-rc1 tag on a Fedora 29 box
>> - default cmake ../qpid-proton && cmake --build . && ctest -VV
>> - no failures
>> - ran all c examples
>> - ran all cpp examples w/exception of service_bus
>>
>> I checked out the 0.27.0-rc1 tag on a 10.11.6 OSX box with Xcode 7.3.1
>> - cmake -DCMAKE_OSX_DEPLOYMENT_TARGET=10.11 -DBUILD_RUBY=NO -DBUILD_GO=NO
>> -DRUNTIME_CHECK=OFF ../qpid-proton && cmake --build . && ctest -VV
>> - no failures
>> - ran all c examples
>> - ran a selection of cpp examples
>>
>> On Wed, Feb 6, 2019 at 10:32 AM Robbie Gemmell <ro...@gmail.com>
>> wrote:
>>
>> > Hi folks,
>> >
>> > I have put together a spin for a Qpid Proton 0.27.0 release, please
>> > give it a test out and vote accordingly.
>> >
>> > The files can be grabbed from:
>> > https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
>> >
>> > The JIRAs assigned are:
>> >
>> >
>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
>> >
>> > It is tagged as 0.27.0-rc1.
>> >
>> > Regards,
>> > Robbie
>> >
>> > ---------------------------------------------------------------------
>> > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
>> > For additional commands, e-mail: users-help@qpid.apache.org
>> >
>> >
>>
>
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Ted Ross <tr...@redhat.com>.
Still testing, but I saw the following warning during the build. It
appears to be in SWIG-generated code, so this might not be easy to address.
[100%] Building C object
python/CMakeFiles/_cproton.dir/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c.o
/home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:
In function ‘SWIG_Python_addvarlink’:
/home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:23177:9:
warning: ‘strncpy’ specified bound depends on the length of the source
argument [-Wstringop-overflow=]
strncpy(gv->name,name,size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ross/tmp/proton/qpid-proton-0.27.0/build/python/CMakeFiles/_cproton.dir/cprotonPYTHON_wrap.c:23174:21:
note: length computed here
size_t size = strlen(name)+1;
^~~~~~~~~~~~
This warning did not halt the build.
-Ted
On Thu, Feb 7, 2019 at 12:41 PM Roddie Kieley <rk...@gmail.com> wrote:
> +1
>
> I checked out the 0.27.0-rc1 tag on a Fedora 29 box
> - default cmake ../qpid-proton && cmake --build . && ctest -VV
> - no failures
> - ran all c examples
> - ran all cpp examples w/exception of service_bus
>
> I checked out the 0.27.0-rc1 tag on a 10.11.6 OSX box with Xcode 7.3.1
> - cmake -DCMAKE_OSX_DEPLOYMENT_TARGET=10.11 -DBUILD_RUBY=NO -DBUILD_GO=NO
> -DRUNTIME_CHECK=OFF ../qpid-proton && cmake --build . && ctest -VV
> - no failures
> - ran all c examples
> - ran a selection of cpp examples
>
> On Wed, Feb 6, 2019 at 10:32 AM Robbie Gemmell <ro...@gmail.com>
> wrote:
>
> > Hi folks,
> >
> > I have put together a spin for a Qpid Proton 0.27.0 release, please
> > give it a test out and vote accordingly.
> >
> > The files can be grabbed from:
> > https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
> >
> > The JIRAs assigned are:
> >
> >
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
> >
> > It is tagged as 0.27.0-rc1.
> >
> > Regards,
> > Robbie
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> > For additional commands, e-mail: users-help@qpid.apache.org
> >
> >
>
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Roddie Kieley <rk...@gmail.com>.
+1
I checked out the 0.27.0-rc1 tag on a Fedora 29 box
- default cmake ../qpid-proton && cmake --build . && ctest -VV
- no failures
- ran all c examples
- ran all cpp examples w/exception of service_bus
I checked out the 0.27.0-rc1 tag on a 10.11.6 OSX box with Xcode 7.3.1
- cmake -DCMAKE_OSX_DEPLOYMENT_TARGET=10.11 -DBUILD_RUBY=NO -DBUILD_GO=NO
-DRUNTIME_CHECK=OFF ../qpid-proton && cmake --build . && ctest -VV
- no failures
- ran all c examples
- ran a selection of cpp examples
On Wed, Feb 6, 2019 at 10:32 AM Robbie Gemmell <ro...@gmail.com>
wrote:
> Hi folks,
>
> I have put together a spin for a Qpid Proton 0.27.0 release, please
> give it a test out and vote accordingly.
>
> The files can be grabbed from:
> https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
>
> The JIRAs assigned are:
>
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
>
> It is tagged as 0.27.0-rc1.
>
> Regards,
> Robbie
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
>
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Keith W <ke...@gmail.com>.
+1
Built from source bundle, verified checksum and signature and ran unit
tests on Mac OS X 17.7.0. No test failures.
On Thu, 7 Feb 2019 at 21:57, Chuck Rolke <cr...@redhat.com> wrote:
>
> +1
>
> * Built on Fedora 29, python 2
> * Ran self tests
> * Ran limited number of C examples stand-alone
> * Built with qpid-dispatch and passed dispatch self tests except system_tests_ssl [1]
>
> [1] Dispatch relies on proton ssl version selection code which is suffering from software rot.
> Please get this jira on the road map.
> https://issues.apache.org/jira/browse/PROTON-1989
>
>
> ----- Original Message -----
> > From: "Timothy Bish" <ta...@gmail.com>
> > To: users@qpid.apache.org
> > Sent: Thursday, February 7, 2019 3:50:30 PM
> > Subject: Re: [VOTE] Release Apache Qpid Proton 0.27.0
> >
> > On 2/6/19 9:01 AM, Robbie Gemmell wrote:
> > > Hi folks,
> > >
> > > I have put together a spin for a Qpid Proton 0.27.0 release, please
> > > give it a test out and vote accordingly.
> > >
> > > The files can be grabbed from:
> > > https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
> > >
> > > The JIRAs assigned are:
> > > https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
> > >
> > > It is tagged as 0.27.0-rc1.
> > >
> > > Regards,
> > > Robbie
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> > > For additional commands, e-mail: users-help@qpid.apache.org
> > >
> > >
> > +1
> >
> > * Verified the signature and checksum files.
> > * Checked for LICENCE and NOTICE files in the archive.
> > * Built the library on Mint 19 and ran the test suite.
> > * Ran some of the examples against an Artemis broker.
> >
> > --
> > Tim Bish
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> > For additional commands, e-mail: users-help@qpid.apache.org
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Chuck Rolke <cr...@redhat.com>.
+1
* Built on Fedora 29, python 2
* Ran self tests
* Ran limited number of C examples stand-alone
* Built with qpid-dispatch and passed dispatch self tests except system_tests_ssl [1]
[1] Dispatch relies on proton ssl version selection code which is suffering from software rot.
Please get this jira on the road map.
https://issues.apache.org/jira/browse/PROTON-1989
----- Original Message -----
> From: "Timothy Bish" <ta...@gmail.com>
> To: users@qpid.apache.org
> Sent: Thursday, February 7, 2019 3:50:30 PM
> Subject: Re: [VOTE] Release Apache Qpid Proton 0.27.0
>
> On 2/6/19 9:01 AM, Robbie Gemmell wrote:
> > Hi folks,
> >
> > I have put together a spin for a Qpid Proton 0.27.0 release, please
> > give it a test out and vote accordingly.
> >
> > The files can be grabbed from:
> > https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
> >
> > The JIRAs assigned are:
> > https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
> >
> > It is tagged as 0.27.0-rc1.
> >
> > Regards,
> > Robbie
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> > For additional commands, e-mail: users-help@qpid.apache.org
> >
> >
> +1
>
> * Verified the signature and checksum files.
> * Checked for LICENCE and NOTICE files in the archive.
> * Built the library on Mint 19 and ran the test suite.
> * Ran some of the examples against an Artemis broker.
>
> --
> Tim Bish
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: [VOTE] Release Apache Qpid Proton 0.27.0
Posted by Timothy Bish <ta...@gmail.com>.
On 2/6/19 9:01 AM, Robbie Gemmell wrote:
> Hi folks,
>
> I have put together a spin for a Qpid Proton 0.27.0 release, please
> give it a test out and vote accordingly.
>
> The files can be grabbed from:
> https://dist.apache.org/repos/dist/dev/qpid/proton/0.27.0-rc1/
>
> The JIRAs assigned are:
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12313720&version=12344242
>
> It is tagged as 0.27.0-rc1.
>
> Regards,
> Robbie
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
>
+1
* Verified the signature and checksum files.
* Checked for LICENCE and NOTICE files in the archive.
* Built the library on Mint 19 and ran the test suite.
* Ran some of the examples against an Artemis broker.
--
Tim Bish
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org