You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by Dimitri Yioulos <dy...@onpointfc.com> on 2012/08/09 14:12:04 UTC
Streaming video
Good morning (or afternoon, as the case may be), all.
Just a brief aside: after setting up OM 2.0, with the help of Maxim, Alexei, and
others, I completely blew up the VM it was loaded on. It was my non-OM mistake
(yup, I make 'em), and was unrecoverable (hadn't backed up the VM, either.
Arrgh.). So I created a new VM, and added OM 2.0. It was your kind and
spot-on answers to my previous questions that allowed me to get my install
working properly. Again, my heartfelt thanks.
Now, to a new question. I've tried to upload and stream a small test avi. But,
the upload fails, with this output:
Name: out
Value:
Name: exitValue
Value: 1
Name: command
Value:
[/usr/bin/ffmpeg, -i, /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_5.flv, -vcodec,
mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
256x240, /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_5.jpg]
Name: error
Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg developers
built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat 4.4.6-4)
configuration: --enable-libmp3lame --enable-postproc --enable-gpl --enable-pthreads --enable-avfilter --prefix=/usr
libavutil 50.36. 0 / 50.36. 0
libavcore 0.16. 1 / 0.16. 1
libavcodec 52.108. 0 / 52.108. 0
libavformat 52.93. 0 / 52.93. 0
libavdevice 52. 2. 3 / 52. 2. 3
libavfilter 1.74. 0 / 1.74. 0
libswscale 0.12. 0 / 0.12. 0
libpostproc 51. 2. 0 / 51. 2. 0
/usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_5.flv:
Invalid data found when processing input
Name: process
Value: previewUpload ID :: 5
Name: exitValue
Value: 0
Name: command
Value:
Name: completeName
Value: /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f2136c8dc1b0c4cdcb0a0ddddf
Name: error
Value:
Name: fileExplorerItemId
Value: 5
Name: process
Value:
I'm unable to interpret this output. Your assistance in solving would be
appreciated, as ever.
Dimitri
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
Ah, I just noticed the Files tab, careless fool that I am. When I clicked on
that, ll of my uploads were listed there. Double-clicking my avi worked.
Thanks for suffering me.
Dimitri
On Thursday 09 August 2012 10:18:21 am Dimitri Yioulos wrote:
> Maxim,
>
> In the OM files tab, the only option is "File upload". If I use that, do
> a "select file", find my file, then drag-and-drop to whiteboard, it doesn't
> work.
>
> Dimitri
>
> On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
> > Open Files tab
> > drag your video to the whiteboard
> >
> > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos
<dy...@onpointfc.com>wrote:
> > > "You might have to goto the file explorer and load it from there to the
> > > whiteboard."
> > >
> > > Er, how do I do that?
> > >
> > > Dimitri
> > >
> > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.com wrote:
> > > > * it never appears in the whiteboard.*
> > > > => but it is in the file explorer itself? Maybe just the checkbox on
> > > > the bottom of the upload window is not working correctly for video
> > > > files. You might have to goto the file explorer and load it from
> > > > there to the whiteboard.
> > > >
> > > > Sebastian
> > > >
> > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > >
> > > > > Spoke too soon (will I never learn). When I try to upload my avi
> > > > > (and, it does
> > > > > play in VLC), the UI dialog box shows that it's uploaded and
> > > > > converted. However, it never appears in the whiteboard. And, there
> > > > > are no errors.
> > > > >
> > > > > Ideas?
> > > > >
> > > > > Dimitri
> > > > >
> > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> > > > > > Sebastian,
> > > > > >
> > > > > > Well, I'm embarrassed. The avi I tired did not, in fact, work
> > > > > > with VLC.
> > > > >
> > > > > I
> > > > >
> > > > > > found another test avi, and it uploaded in OM just fine.
> > > > > >
> > > > > > Apologies for the noise.
> > > > > >
> > > > > > Dimitri
> > > > > >
> > > > > > On Thursday 09 August 2012 9:00:16 am seba.wagner@gmail.com wrote:
> > > > > > > Does the file:
> > > > > > > /usr/local/openmeetings/
> > > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > > > > exist?
> > > > > > > Can you download and watch it using VLC-Player or any other
> > > > > > > Video
> > > > >
> > > > > player?
> > > > >
> > > > > > > Sebastian
> > > > > > >
> > > > > > >
> > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > >
> > > > > > > > Sebastian,
> > > > > > > >
> > > > > > > > This is all the output from the UI:
> > > > > > > >
> > > > > > > > Name: out
> > > > > > > > Value:
> > > > > > > > Name: exitValue
> > > > > > > > Value: 1
> > > > > > > > Name: command
> > > > > > > > Value:
> > > > > > > > [/usr/bin/ffmpeg, -i,
> > > > >
> > > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLO
> > > > >AD FL
> > > > >
> > > > > > > >V_ 6.flv, -vcodec,
> > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > 256x240,
> > > > >
> > > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLO
> > > > >AD FL
> > > > >
> > > > > > > >V_ 6.jpg] Name: error
> > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the
> > > > > > > > FFmpeg developers
> > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red
> > > > > > > > Hat 4.4.6-4)
> > > > > > > >
> > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> > > > > > > > --prefix=/usr libavutil 50.36. 0 / 50.36. 0
> > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > > >
> > > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLO
> > > > >AD FL
> > > > >
> > > > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > > > >
> > > > > > > > Name: process
> > > > > > > > Value: previewUpload ID :: 6
> > > > > > > > Name: exitValue
> > > > > > > > Value: 0
> > > > > > > > Name: command
> > > > > > > > Value:
> > > > > > > > Name: completeName
> > > > > > > > Value:
> > > > >
> > > > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069
> > > > >a6 5a
> > > > >
> > > > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > > > Value:
> > > > > > > > Name: fileExplorerItemId
> > > > > > > > Value: 6
> > > > > > > > Name: process
> > > > > > > > Value:
> > > > > > > >
> > > > > > > > Dimitri
> > > > > > > >
> > > > > > > > On Thursday 09 August 2012 8:45:06 am
seba.wagner@gmail.comwrote:
> > > > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > > > => I donn't think so. Did you scroll or do "ctrl-a" before
> > > > > > > > > you
> > > > >
> > > > > copied
> > > > >
> > > > > > > > > the content?
> > > > > > > > >
> > > > > > > > > The error message in the UI should be sufficient. No need
> > > > > > > > > to search for anything in the logs at this point.
> > > > > > > > >
> > > > > > > > > Sebastian
> > > > > > > > >
> > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > >
> > > > > > > > > > Hi, Sebastian.
> > > > > > > > > >
> > > > > > > > > > I just copied what appeared in the OM instance on my
> > > > > > > > > > desktop
> > > > >
> > > > > when I
> > > > >
> > > > > > > > tried
> > > > > > > >
> > > > > > > > > > to
> > > > > > > > > > upload the avi. Error.log in the OM log directory is
> > > > > > > > > > empty.
> > > > >
> > > > > Would
> > > > >
> > > > > > > > > > I find the
> > > > > > > > > > output in red5.log or openmeetings.log? What would I
> > > > > > > > > > grep
> > >
> > > on?
> > >
> > > > > > > > > > Thanks.
> > > > > > > > > >
> > > > > > > > > > Dimitri
> > > > > > > > > >
> > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
> > >
> > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > > > > The conversation log error is much longer. You just
> > > > > > > > > > > copied the final
> > > > > > > > > >
> > > > > > > > > > lines
> > > > > > > > > >
> > > > > > > > > > > that convert a screenshot for the preview of the video.
> > > > > > > > > > > The actual error already happened before when the video
> > > > > > > > > > > was converted to
> > > > > > > > > >
> > > > > > > > > > a
> > > > > > > > > >
> > > > > > > > > > > FLV, the FLV is either broken or was never successfully
> > > > > > > > > > > created from the given file.
> > > > > > > > > > >
> > > > > > > > > > > Sebastian
> > > > > > > > > > >
> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > >
> > > > > > > > > > > > Good morning (or afternoon, as the case may be), all.
> > > > > > > > > > > >
> > > > > > > > > > > > Just a brief aside: after setting up OM 2.0, with the
> > >
> > > help
> > >
> > > > > > > > > > > > of
> > > > > > > >
> > > > > > > > Maxim,
> > > > > > > >
> > > > > > > > > > > > Alexei, and
> > > > > > > > > > > > others, I completely blew up the VM it was loaded on.
> > > > > > > > > > > > It was my non-OM mistake
> > > > > > > > > > > > (yup, I make 'em), and was unrecoverable (hadn't
> > > > > > > > > > > > backed
> > >
> > > up
> > >
> > > > > the
> > > > >
> > > > > > > > > > > > VM, either. Arrgh.). So I created a new VM, and
> > > > > > > > > > > > added OM
> > > > >
> > > > > 2.0.
> > > > >
> > > > > > > > > > > > It was your kind and spot-on answers to my previous
> > > > > > > > > > > > questions that allowed me to
> > > > > > > > > >
> > > > > > > > > > get
> > > > > > > > > >
> > > > > > > > > > > > my install working properly. Again, my heartfelt
> > > > > > > > > > > > thanks.
> > > > > > > > > > > >
> > > > > > > > > > > > Now, to a new question. I've tried to upload and
> > > > > > > > > > > > stream
> > >
> > > a
> > >
> > > > > > > > > > > > small
> > > > > > > >
> > > > > > > > test
> > > > > > > >
> > > > > > > > > > > > avi. But,
> > > > > > > > > > > > the upload fails, with this output:
> > > > > > > > > > > >
> > > > > > > > > > > > Name: out
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > Value: 1
> > > > > > > > > > > > Name: command
> > > > > > > > > > > > Value:
> > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > > > >
> > > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLO
> > > > >AD FL
> > > > >
> > > > > > > >V_
> > > > > > > >
> > > > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > 256x240,
> > > > >
> > > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLO
> > > > >AD FL
> > > > >
> > > > > > > >V_
> > > > > > > >
> > > > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > > 2000-2011 the
> > > > > > > >
> > > > > > > > FFmpeg
> > > > > > > >
> > > > > > > > > > > > developers
> > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
> > > > > > > > > > > > 20120305 (Red Hat
> > > > > > > > > >
> > > > > > > > > > 4.4.6-4)
> > > > > > > > > >
> > > > > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> > > > >
> > > > > --prefix=/usr
> > > > >
> > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > > >
> > > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLO
> > > > >AD FL
> > > > >
> > > > > > > >V_
> > > > > > > >
> > > > > > > > > > > >5.flv: Invalid data found when processing input
> > > > > > > > > > > >
> > > > > > > > > > > > Name: process
> > > > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > Value: 0
> > > > > > > > > > > > Name: command
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > Value:
> > > > >
> > > > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b005
> > > > >9f 21
> > > > >
> > > > > > > >36
> > > > > > > >
> > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > Value: 5
> > > > > > > > > > > > Name: process
> > > > > > > > > > > > Value:
> > > > > > > > > > > >
> > > > > > > > > > > > I'm unable to interpret this output. Your assistance
> > > > > > > > > > > > in solving would
> > > > > > > > > >
> > > > > > > > > > be
> > > > > > > > > >
> > > > > > > > > > > > appreciated, as ever.
> > > > > > > > > > > >
> > > > > > > > > > > > Dimitri
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > believed to be clean.
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > believed to be clean.
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Sebastian Wagner
> > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > http://www.webbase-design.de
> > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > seba.wagner@gmail.com
> > > > > > > >
> > > > > > > > --
> > > > > > > > This message has been scanned for viruses and
> > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > believed to be clean.
> > > > > > >
> > > > > > > --
> > > > > > > Sebastian Wagner
> > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > http://www.webbase-design.de
> > > > > > > http://www.wagner-sebastian.com
> > > > > > > seba.wagner@gmail.com
> > > > >
> > > > > --
> > > > > This message has been scanned for viruses and
> > > > > dangerous content by MailScanner, and is
> > > > > believed to be clean.
> > > >
> > > > --
> > > > Sebastian Wagner
> > > > https://twitter.com/#!/dead_lock
> > > > http://www.webbase-design.de
> > > > http://www.wagner-sebastian.com
> > > > seba.wagner@gmail.com
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> >
> > --
> > WBR
> > Maxim aka solomax
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
Will do. Thanks.
On Thursday 09 August 2012 10:44:34 am Maxim Solodovnik wrote:
> I believe pause/seek is not implemented
> Please file the issue
>
> On Thu, Aug 9, 2012 at 9:41 PM, Dimitri Yioulos <dy...@onpointfc.com>wrote:
> > Sebastian,
> >
> > Clicking on the video didn't work, but that could just be me.
> >
> > Dimitri
> >
> > On Thursday 09 August 2012 10:37:15 am seba.wagner@gmail.com wrote:
> > > I think you can pause if you simply click on the video.
> > > Seek is not implemented however.
> > >
> > > Sebastian
> > >
> > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > >
> > > > Maxim,
> > > >
> > > > Sorry I made you go through that, when a little digging on my part
> >
> > would
> >
> > > > have
> > > > solved the problem. But, a related question:
> > > >
> > > > there's currently no ability to pause a video (or, at least none that
> > > > I can see). From a development standpoint, is that doable and, if
> > > > so, might that be
> > > > added as a feature request?
> > > >
> > > > Dimitri
> > > >
> > > > On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
> > > > > OK
> > > > >
> > > > > the longer steps :)
> > > > > 1) file upload
> > > > > 2) select file
> > > > > 3) upload file
> > > > > 4) wait until file is uploaded and appear under private or public
> >
> > files
> >
> > > > > 5) drag file from private or public files and drop it to the
> >
> > whiteboard
> >
> > > > > just tested it on 2.1 works for me
> > > > >
> > > > > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <
> >
> > dyioulos@onpointfc.com
> >
> > > > >wrote:
> > > > > > Maxim,
> > > > > >
> > > > > > In the OM files tab, the only option is "File upload". If I use
> > > > > > that,
> > > >
> > > > do
> > > >
> > > > > > a "select file", find my file, then drag-and-drop to whiteboard,
> > > > > > it doesn't work.
> > > > > >
> > > > > > Dimitri
> > > > > >
> > > > > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
> > > > > > > Open Files tab
> > > > > > > drag your video to the whiteboard
> > > > > > >
> > > > > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
> > > >
> > > > dyioulos@onpointfc.com
> > > >
> > > > > > >wrote:
> > > > > > > > "You might have to goto the file explorer and load it from
> >
> > there
> >
> > > > > > > > to the whiteboard."
> > > > > > > >
> > > > > > > > Er, how do I do that?
> > > > > > > >
> > > > > > > > Dimitri
> > > > > > > >
> > > > > > > > On Thursday 09 August 2012 9:58:54 am
seba.wagner@gmail.comwrote:
> > > > > > > > > * it never appears in the whiteboard.*
> > > > > > > > > => but it is in the file explorer itself? Maybe just the
> > > > > > > > > checkbox on the bottom of the upload window is not working
> > > > > > > > > correctly for video files. You might have to goto the file
> > > > > > > > > explorer and load it from
> > > > > >
> > > > > > there
> > > > > >
> > > > > > > > > to the whiteboard.
> > > > > > > > >
> > > > > > > > > Sebastian
> > > > > > > > >
> > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > >
> > > > > > > > > > Spoke too soon (will I never learn). When I try to
> > > > > > > > > > upload
> >
> > my
> >
> > > > avi
> > > >
> > > > > > > > > > (and, it does
> > > > > > > > > > play in VLC), the UI dialog box shows that it's uploaded
> >
> > and
> >
> > > > > > > > > > converted. However, it never appears in the whiteboard.
> >
> > And,
> >
> > > > > > > > > > there are no errors.
> > > > > > > > > >
> > > > > > > > > > Ideas?
> > > > > > > > > >
> > > > > > > > > > Dimitri
> > > > > > > > > >
> > > > > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos
> >
> > wrote:
> > > > > > > > > > > Sebastian,
> > > > > > > > > > >
> > > > > > > > > > > Well, I'm embarrassed. The avi I tired did not, in
> > > > > > > > > > > fact,
> > > >
> > > > work
> > > >
> > > > > > with
> > > > > >
> > > > > > > > > > > VLC.
> > > > > > > > > >
> > > > > > > > > > I
> > > > > > > > > >
> > > > > > > > > > > found another test avi, and it uploaded in OM just
> > > > > > > > > > > fine.
> > > > > > > > > > >
> > > > > > > > > > > Apologies for the noise.
> > > > > > > > > > >
> > > > > > > > > > > Dimitri
> > > > > > > > > > >
> > > > > > > > > > > On Thursday 09 August 2012 9:00:16 am
> > > >
> > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > Does the file:
> > > > > > > > > > > > /usr/local/openmeetings/
> > > > > > > > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.fl
> > > > > > > > > > > >v exist?
> > > > > > > > > > > > Can you download and watch it using VLC-Player or any
> > > > > > > > > > > > other
> > > > > >
> > > > > > Video
> > > > > >
> > > > > > > > > > player?
> > > > > > > > > >
> > > > > > > > > > > > Sebastian
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > > >
> > > > > > > > > > > > > Sebastian,
> > > > > > > > > > > > >
> > > > > > > > > > > > > This is all the output from the UI:
> > > > > > > > > > > > >
> > > > > > > > > > > > > Name: out
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > Value: 1
> > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > > > > > >FL
> > > > > > > > > >
> > > > > > > > > > > > >V_ 6.flv, -vcodec,
> > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > > 256x240,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > > > > > >FL
> > > > > > > > > >
> > > > > > > > > > > > >V_ 6.jpg] Name: error
> > > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > > > 2000-2011 the FFmpeg developers
> > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
> >
> > 20120305
> >
> > > > > > > > > > > > > (Red Hat 4.4.6-4)
> > > > > > > > > > > > >
> > > > > > > > > > > > > configuration: --enable-libmp3lame
> > > > > > > > > > > > > --enable-postproc --enable-gpl --enable-pthreads
> > > > > > > > > > > > > --enable-avfilter
> > > > > >
> > > > > > --prefix=/usr
> > > > > >
> > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > > > > > >FL
> > > > > > > > > >
> > > > > > > > > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > > > > > > > > >
> > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > Value: previewUpload ID :: 6
> > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > Value: 0
> > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > > Value:
> >
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
> >
> > > > > > > > > >5a
> > > > > > > > > >
> > > > > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > > Value: 6
> > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > >
> > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > >
> > > > > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
> > > > > >
> > > > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > > > > > > > > => I donn't think so. Did you scroll or do
> > > > > > > > > > > > > > "ctrl-a" before you
> > > > > > > > > >
> > > > > > > > > > copied
> > > > > > > > > >
> > > > > > > > > > > > > > the content?
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > The error message in the UI should be sufficient.
> >
> > No
> >
> > > > need
> > > >
> > > > > > to
> > > > > >
> > > > > > > > > > > > > > search for anything in the logs at this point.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Sebastian
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Hi, Sebastian.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > I just copied what appeared in the OM instance
> > > > > > > > > > > > > > > on my desktop
> > > > > > > > > >
> > > > > > > > > > when I
> > > > > > > > > >
> > > > > > > > > > > > > tried
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > to
> > > > > > > > > > > > > > > upload the avi. Error.log in the OM log
> >
> > directory
> >
> > > > > > > > > > > > > > > is empty.
> > > > > > > > > >
> > > > > > > > > > Would
> > > > > > > > > >
> > > > > > > > > > > > > > > I find the
> > > > > > > > > > > > > > > output in red5.log or openmeetings.log? What
> >
> > would
> >
> > > > > > > > > > > > > > > I
> > > > > >
> > > > > > grep
> > > > > >
> > > > > > > > on?
> > > > > > > >
> > > > > > > > > > > > > > > Thanks.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
> > > > > > > >
> > > > > > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > > > > > I don' think you've copied the whole error
> > > > > > > > > > > > > > > > log. The conversation log error is much
> > > > > > > > > > > > > > > > longer. You just copied the final
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > lines
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > that convert a screenshot for the preview of
> >
> > the
> >
> > > > > > > > > > > > > > > > video. The actual error already happened
> > > > > > > > > > > > > > > > before
> > > >
> > > > when
> > > >
> > > > > > > > > > > > > > > > the video was converted to
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > a
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > FLV, the FLV is either broken or was never
> > > > > > > > > > > > > > > > successfully created from the given file.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Sebastian
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
> >
> > dyioulos@onpointfc.com>
> >
> > > > > > > > > > > > > > > > > Good morning (or afternoon, as the case may
> > > > > > > > > > > > > > > > > be), all.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Just a brief aside: after setting up OM
> > > > > > > > > > > > > > > > > 2.0, with the
> > > > > > > >
> > > > > > > > help
> > > > > > > >
> > > > > > > > > > > > > > > > > of
> > > > > > > > > > > > >
> > > > > > > > > > > > > Maxim,
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Alexei, and
> > > > > > > > > > > > > > > > > others, I completely blew up the VM it was
> > > > > > > > > > > > > > > > > loaded on. It was my non-OM mistake
> > > > > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable
> > > > > > > > > > > > > > > > > (hadn't
> > > > > >
> > > > > > backed
> > > > > >
> > > > > > > > up
> > > > > > > >
> > > > > > > > > > the
> > > > > > > > > >
> > > > > > > > > > > > > > > > > VM, either. Arrgh.). So I created a new
> > > > > > > > > > > > > > > > > VM, and
> > > > > >
> > > > > > added
> > > > > >
> > > > > > > > > > > > > > > > > OM
> > > > > > > > > >
> > > > > > > > > > 2.0.
> > > > > > > > > >
> > > > > > > > > > > > > > > > > It was your kind and spot-on answers to my
> > > >
> > > > previous
> > > >
> > > > > > > > > > > > > > > > > questions that allowed me to
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > get
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > my install working properly. Again, my
> > > > > > > > > > > > > > > > > heartfelt thanks.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Now, to a new question. I've tried to
> > > > > > > > > > > > > > > > > upload and stream
> > > > > > > >
> > > > > > > > a
> > > > > > > >
> > > > > > > > > > > > > > > > > small
> > > > > > > > > > > > >
> > > > > > > > > > > > > test
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > avi. But,
> > > > > > > > > > > > > > > > > the upload fails, with this output:
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Name: out
> > > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > > > > Value: 1
> > > > > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > > > > > >FL
> > > > > > > > > >
> > > > > > > > > > > > >V_
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > > > > > > 256x240,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > > > > > >FL
> > > > > > > > > >
> > > > > > > > > > > > >V_
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright
> >
> > (c)
> >
> > > > > > > > > > > > > > > > > 2000-2011 the
> > > > > > > > > > > > >
> > > > > > > > > > > > > FFmpeg
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > developers
> > > > > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc
> >
> > 4.4.6
> >
> > > > > > 20120305
> > > > > >
> > > > > > > > > > > > > > > > > (Red Hat
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > 4.4.6-4)
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > configuration: --enable-libmp3lame
> > > > > > > > > > > > > > > > > --enable-postproc --enable-gpl
> > > > > > > > > > > > > > > > > --enable-pthreads --enable-avfilter
> > > > > > > > > >
> > > > > > > > > > --prefix=/usr
> > > > > > > > > >
> > > > > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > > > > > >FL
> > > > > > > > > >
> > > > > > > > > > > > >V_
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >5.flv: Invalid data found when processing
> >
> > input
> >
> > > > > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > > > > Value: 0
> > > > > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > > > > > > Value:
> >
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
> >
> > > > > > > > > >21
> > > > > > > > > >
> > > > > > > > > > > > >36
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > > > > > > Value: 5
> > > > > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > I'm unable to interpret this output. Your
> > > > > > > > > > > > > > > > > assistance in solving would
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > be
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > appreciated, as ever.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > This message has been scanned for viruses
> > > > > > > > > > > > > > > > > and dangerous content by MailScanner, and
> > > > > > > > > > > > > > > > > is believed to be clean.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > --
> > > > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > believed to be clean.
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Sebastian Wagner
> > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > http://www.webbase-design.de
> > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > seba.wagner@gmail.com
> > > > > > > >
> > > > > > > > --
> > > > > > > > This message has been scanned for viruses and
> > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > believed to be clean.
> > > > > > >
> > > > > > > --
> > > > > > > WBR
> > > > > > > Maxim aka solomax
> > > > > >
> > > > > > --
> > > > > > This message has been scanned for viruses and
> > > > > > dangerous content by MailScanner, and is
> > > > > > believed to be clean.
> > > > >
> > > > > --
> > > > > WBR
> > > > > Maxim aka solomax
> > > >
> > > > --
> > > > This message has been scanned for viruses and
> > > > dangerous content by MailScanner, and is
> > > > believed to be clean.
> > >
> > > --
> > > Sebastian Wagner
> > > https://twitter.com/#!/dead_lock
> > > http://www.webbase-design.de
> > > http://www.wagner-sebastian.com
> > > seba.wagner@gmail.com
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
>
> --
> WBR
> Maxim aka solomax
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by RM P <by...@gmail.com>.
Looks complicated stuff. Honestly I had missed out on the point of syncing
up which makes it more challenging. Would be really difficult to take it
forward all by myself, though would like to do it.
Appreciate your feedback.
thanks,
Manohar
On Fri, Nov 16, 2012 at 7:34 PM, seba.wagner@gmail.com <
seba.wagner@gmail.com> wrote:
> this will only pause the video locally.
> You need to:
> In the whiteboard object that is stored in the server side session, there
> is a "video" object (similar to drawings, a whiteboard video has some meta
> info stored in the server side session, any new user that enters the room
> will load the session object of the whiteboards from the server).
> This "video-object" needs a new flag: paused
> If the user clicks on the "pause" button an event must be send from the
> client to the server, update the flag "paused" in the server session's
> "video-object" and broadcast a message to all connected users, that there
> is an update of the "pause" flag (usually you send the whole session object
> of the "video-object" and just change that "paused" flag to true).
> Now every client must have handlers to react on changes to this flag.
> Additionally when a new user enters the room, while the video is paused,
> the video must be loaded but paused (and if the user clicks "un-pause" the
> stream must continue on all whiteboards at the same time (this is a bit
> more tricky cause a simply play will _not_ work as the user that enters the
> room must seek to the place where the other users currently see the video).
> Eventually it makes sense that if a new user enters the room, while the
> video is paused, you first seek to the current position of the video and
> then directly pause it, that way the new user also see's the same image in
> the video and you can simply call "play" (or NetStream.pause(false)) on all
> streams without checking the timestamp first.
>
> So there is a bit more work involved here then simple start/stop the video
> :)
> => You have to sync all users
> => You need to take care that new users that enter the room see the same
> thing everybody does
> => "Unpausing" the video must show the same position in the video on all
> screens.
>
> Sebastian
>
>
>
>
>
> 2012/11/16 RM P <by...@gmail.com>
>
>> Hi Sebastian,
>>
>> I did little investigations to see what code changes are required. I
>> would appreciate your inputs on the following. Can you please let me know
>> your views on further implementations. Appreciate your feedback. thanks,
>> Manohar
>>
>>
>> filename - > whiteboardvideoplayer.lzx
>>
>> *calling "canvas.sendViaLocalConnection" with method name to play and
>> stop video.*
>> *Need to add pause method here.*
>>
>> filename -> hibAdapter.lzx
>>
>> *Need to implement a pause similar to what has been done for
>> "pauseRecordingPlayback"*
>> * <method name="pauseRecordingPlayback" args="pauseBool">
>> if($debug) Debug.write("pauseRecordingPlayback ");
>> if (this.baseVideoStream == null) {
>> if ($debug) Debug.warn("baseVideoStream is NULL");
>> return;
>> }
>> this.baseVideoStream.pause(pauseBool);
>> </method>*
>>
>>
>>
>>
>> On Fri, Nov 9, 2012 at 11:33 AM, RM P <by...@gmail.com> wrote:
>>
>>> HI Sebastian,
>>>
>>> can you please guide on to make video stream - pause and seek
>>> functional. I believe the code is in place and looking for few pointers
>>> which will help.
>>>
>>> Appreciate your response.
>>>
>>> thanks
>>> Manohar
>>>
>>> On Tue, Nov 6, 2012 at 4:57 PM, RM P <by...@gmail.com> wrote:
>>>
>>>> Hi Sebastian,
>>>>
>>>> can you please provide on which files need to be changed to incorporate
>>>> additional controls like pause, seek etc.
>>>>
>>>> appreciate your reply.
>>>>
>>>> thanks,
>>>> Manohar
>>>>
>>>> On Thu, Aug 9, 2012 at 8:14 PM, seba.wagner@gmail.com <
>>>> seba.wagner@gmail.com> wrote:
>>>>
>>>>> Well then possibly the pause is not implemented either.
>>>>> You can only stop and play the videos then "synchronized" between you
>>>>> and the other conference participants.
>>>>>
>>>>>
>>>>> Sebastian
>>>>>
>>>>> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>>>
>>>>>> Sebastian,
>>>>>>
>>>>>> Clicking on the video didn't work, but that could just be me.
>>>>>>
>>>>>> Dimitri
>>>>>>
>>>>>>
>>>>>> On Thursday 09 August 2012 10:37:15 am seba.wagner@gmail.com wrote:
>>>>>> > I think you can pause if you simply click on the video.
>>>>>> > Seek is not implemented however.
>>>>>> >
>>>>>> > Sebastian
>>>>>> >
>>>>>> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>>>> >
>>>>>> > > Maxim,
>>>>>> > >
>>>>>> > > Sorry I made you go through that, when a little digging on my
>>>>>> part would
>>>>>> > > have
>>>>>> > > solved the problem. But, a related question:
>>>>>> > >
>>>>>> > > there's currently no ability to pause a video (or, at least none
>>>>>> that I
>>>>>> > > can see). From a development standpoint, is that doable and, if
>>>>>> so,
>>>>>> > > might that be
>>>>>> > > added as a feature request?
>>>>>> > >
>>>>>> > > Dimitri
>>>>>> > >
>>>>>> > > On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
>>>>>> > > > OK
>>>>>> > > >
>>>>>> > > > the longer steps :)
>>>>>> > > > 1) file upload
>>>>>> > > > 2) select file
>>>>>> > > > 3) upload file
>>>>>> > > > 4) wait until file is uploaded and appear under private or
>>>>>> public files
>>>>>> > > > 5) drag file from private or public files and drop it to the
>>>>>> whiteboard
>>>>>> > > >
>>>>>> > > > just tested it on 2.1 works for me
>>>>>> > > >
>>>>>> > > > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <
>>>>>> dyioulos@onpointfc.com
>>>>>> > > >
>>>>>> > > >wrote:
>>>>>> > > > > Maxim,
>>>>>> > > > >
>>>>>> > > > > In the OM files tab, the only option is "File upload". If I
>>>>>> use
>>>>>> > > > > that,
>>>>>> > >
>>>>>> > > do
>>>>>> > >
>>>>>> > > > > a "select file", find my file, then drag-and-drop to
>>>>>> whiteboard, it
>>>>>> > > > > doesn't work.
>>>>>> > > > >
>>>>>> > > > > Dimitri
>>>>>> > > > >
>>>>>> > > > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
>>>>>> > > > > > Open Files tab
>>>>>> > > > > > drag your video to the whiteboard
>>>>>> > > > > >
>>>>>> > > > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
>>>>>> > >
>>>>>> > > dyioulos@onpointfc.com
>>>>>> > >
>>>>>> > > > > >wrote:
>>>>>> > > > > > > "You might have to goto the file explorer and load it
>>>>>> from there
>>>>>> > > > > > > to the whiteboard."
>>>>>> > > > > > >
>>>>>> > > > > > > Er, how do I do that?
>>>>>> > > > > > >
>>>>>> > > > > > > Dimitri
>>>>>> > > > > > >
>>>>>> > > > > > > On Thursday 09 August 2012 9:58:54 am
>>>>>> seba.wagner@gmail.com wrote:
>>>>>> > > > > > > > * it never appears in the whiteboard.*
>>>>>> > > > > > > > => but it is in the file explorer itself? Maybe just the
>>>>>> > > > > > > > checkbox on the bottom of the upload window is not
>>>>>> working
>>>>>> > > > > > > > correctly for video files. You might have to goto the
>>>>>> file
>>>>>> > > > > > > > explorer and load it from
>>>>>> > > > >
>>>>>> > > > > there
>>>>>> > > > >
>>>>>> > > > > > > > to the whiteboard.
>>>>>> > > > > > > >
>>>>>> > > > > > > > Sebastian
>>>>>> > > > > > > >
>>>>>> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>>>> > > > > > > >
>>>>>> > > > > > > > > Spoke too soon (will I never learn). When I try to
>>>>>> upload my
>>>>>> > >
>>>>>> > > avi
>>>>>> > >
>>>>>> > > > > > > > > (and, it does
>>>>>> > > > > > > > > play in VLC), the UI dialog box shows that it's
>>>>>> uploaded and
>>>>>> > > > > > > > > converted. However, it never appears in the
>>>>>> whiteboard. And,
>>>>>> > > > > > > > > there are no errors.
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > Ideas?
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > Dimitri
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos
>>>>>> wrote:
>>>>>> > > > > > > > > > Sebastian,
>>>>>> > > > > > > > > >
>>>>>> > > > > > > > > > Well, I'm embarrassed. The avi I tired did not, in
>>>>>> fact,
>>>>>> > >
>>>>>> > > work
>>>>>> > >
>>>>>> > > > > with
>>>>>> > > > >
>>>>>> > > > > > > > > > VLC.
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > I
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > found another test avi, and it uploaded in OM just
>>>>>> fine.
>>>>>> > > > > > > > > >
>>>>>> > > > > > > > > > Apologies for the noise.
>>>>>> > > > > > > > > >
>>>>>> > > > > > > > > > Dimitri
>>>>>> > > > > > > > > >
>>>>>> > > > > > > > > > On Thursday 09 August 2012 9:00:16 am
>>>>>> > >
>>>>>> > > seba.wagner@gmail.comwrote:
>>>>>> > > > > > > > > > > Does the file:
>>>>>> > > > > > > > > > > /usr/local/openmeetings/
>>>>>> > > > > > > > > > >
>>>>>> webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
>>>>>> > > > > > > > > > > exist?
>>>>>> > > > > > > > > > > Can you download and watch it using VLC-Player or
>>>>>> any
>>>>>> > > > > > > > > > > other
>>>>>> > > > >
>>>>>> > > > > Video
>>>>>> > > > >
>>>>>> > > > > > > > > player?
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > Sebastian
>>>>>> > > > > > > > > > >
>>>>>> > > > > > > > > > >
>>>>>> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>>>> > > > > > > > > > >
>>>>>> > > > > > > > > > > > Sebastian,
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > This is all the output from the UI:
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > Name: out
>>>>>> > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > > Name: exitValue
>>>>>> > > > > > > > > > > > Value: 1
>>>>>> > > > > > > > > > > > Name: command
>>>>>> > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>>>>>> > > > >
>>>>>> > > > >
>>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>>> > > > >
>>>>>> > > > > > > > >FL
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > >V_ 6.flv, -vcodec,
>>>>>> > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
>>>>>> > > > > > > > > > > > 256x240,
>>>>>> > > > >
>>>>>> > > > >
>>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>>> > > > >
>>>>>> > > > > > > > >FL
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > >V_ 6.jpg] Name: error
>>>>>> > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
>>>>>> > > > > > > > > > > > 2000-2011 the FFmpeg developers
>>>>>> > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
>>>>>> 20120305
>>>>>> > > > > > > > > > > > (Red Hat 4.4.6-4)
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > configuration: --enable-libmp3lame
>>>>>> --enable-postproc
>>>>>> > > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
>>>>>> > > > >
>>>>>> > > > > --prefix=/usr
>>>>>> > > > >
>>>>>> > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>>>>>> > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>>>>>> > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>>>>>> > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>>>>>> > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>>>>>> > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>>>>>> > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>>>>>> > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>>>>>> > > > >
>>>>>> > > > >
>>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>>> > > > >
>>>>>> > > > > > > > >FL
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > >V_ 6.flv: Invalid data found when processing
>>>>>> input
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > Name: process
>>>>>> > > > > > > > > > > > Value: previewUpload ID :: 6
>>>>>> > > > > > > > > > > > Name: exitValue
>>>>>> > > > > > > > > > > > Value: 0
>>>>>> > > > > > > > > > > > Name: command
>>>>>> > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > > Name: completeName
>>>>>> > > > > > > > > > > > Value:
>>>>>> > > > >
>>>>>> > > > >
>>>>>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
>>>>>> > > > >
>>>>>> > > > > > > > >5a
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
>>>>>> > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > > Name: fileExplorerItemId
>>>>>> > > > > > > > > > > > Value: 6
>>>>>> > > > > > > > > > > > Name: process
>>>>>> > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > Dimitri
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
>>>>>> > > > >
>>>>>> > > > > seba.wagner@gmail.comwrote:
>>>>>> > > > > > > > > > > > > *I just copied what appeared in the OM
>>>>>> instance*
>>>>>> > > > > > > > > > > > > => I donn't think so. Did you scroll or do
>>>>>> "ctrl-a"
>>>>>> > > > > > > > > > > > > before you
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > copied
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > > > the content?
>>>>>> > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > The error message in the UI should be
>>>>>> sufficient. No
>>>>>> > >
>>>>>> > > need
>>>>>> > >
>>>>>> > > > > to
>>>>>> > > > >
>>>>>> > > > > > > > > > > > > search for anything in the logs at this point.
>>>>>> > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > Sebastian
>>>>>> > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
>>>>>> dyioulos@onpointfc.com>
>>>>>> > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > Hi, Sebastian.
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > I just copied what appeared in the OM
>>>>>> instance on
>>>>>> > > > > > > > > > > > > > my desktop
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > when I
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > > tried
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > to
>>>>>> > > > > > > > > > > > > > upload the avi. Error.log in the OM log
>>>>>> directory
>>>>>> > > > > > > > > > > > > > is empty.
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > Would
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > > > > I find the
>>>>>> > > > > > > > > > > > > > output in red5.log or openmeetings.log?
>>>>>> What would
>>>>>> > > > > > > > > > > > > > I
>>>>>> > > > >
>>>>>> > > > > grep
>>>>>> > > > >
>>>>>> > > > > > > on?
>>>>>> > > > > > >
>>>>>> > > > > > > > > > > > > > Thanks.
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > Dimitri
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
>>>>>> > > > > > >
>>>>>> > > > > > > seba.wagner@gmail.comwrote:
>>>>>> > > > > > > > > > > > > > > I don' think you've copied the whole
>>>>>> error log.
>>>>>> > > > > > > > > > > > > > > The conversation log error is much
>>>>>> longer. You
>>>>>> > > > > > > > > > > > > > > just copied the final
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > lines
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > that convert a screenshot for the preview
>>>>>> of the
>>>>>> > > > > > > > > > > > > > > video. The actual error already happened
>>>>>> before
>>>>>> > >
>>>>>> > > when
>>>>>> > >
>>>>>> > > > > > > > > > > > > > > the video was converted to
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > a
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > FLV, the FLV is either broken or was never
>>>>>> > > > > > > > > > > > > > > successfully created from the given file.
>>>>>> > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > Sebastian
>>>>>> > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
>>>>>> dyioulos@onpointfc.com>
>>>>>> > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > Good morning (or afternoon, as the case
>>>>>> may
>>>>>> > > > > > > > > > > > > > > > be), all.
>>>>>> > > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > Just a brief aside: after setting up OM
>>>>>> 2.0,
>>>>>> > > > > > > > > > > > > > > > with the
>>>>>> > > > > > >
>>>>>> > > > > > > help
>>>>>> > > > > > >
>>>>>> > > > > > > > > > > > > > > > of
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > Maxim,
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > Alexei, and
>>>>>> > > > > > > > > > > > > > > > others, I completely blew up the VM it
>>>>>> was
>>>>>> > > > > > > > > > > > > > > > loaded on. It was my non-OM mistake
>>>>>> > > > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable
>>>>>> > > > > > > > > > > > > > > > (hadn't
>>>>>> > > > >
>>>>>> > > > > backed
>>>>>> > > > >
>>>>>> > > > > > > up
>>>>>> > > > > > >
>>>>>> > > > > > > > > the
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > VM, either. Arrgh.). So I created a
>>>>>> new VM,
>>>>>> > > > > > > > > > > > > > > > and
>>>>>> > > > >
>>>>>> > > > > added
>>>>>> > > > >
>>>>>> > > > > > > > > > > > > > > > OM
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > 2.0.
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > It was your kind and spot-on answers to
>>>>>> my
>>>>>> > >
>>>>>> > > previous
>>>>>> > >
>>>>>> > > > > > > > > > > > > > > > questions that allowed me to
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > get
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > my install working properly. Again, my
>>>>>> > > > > > > > > > > > > > > > heartfelt thanks.
>>>>>> > > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > Now, to a new question. I've tried to
>>>>>> upload
>>>>>> > > > > > > > > > > > > > > > and stream
>>>>>> > > > > > >
>>>>>> > > > > > > a
>>>>>> > > > > > >
>>>>>> > > > > > > > > > > > > > > > small
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > test
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > avi. But,
>>>>>> > > > > > > > > > > > > > > > the upload fails, with this output:
>>>>>> > > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > Name: out
>>>>>> > > > > > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > > > > > > Name: exitValue
>>>>>> > > > > > > > > > > > > > > > Value: 1
>>>>>> > > > > > > > > > > > > > > > Name: command
>>>>>> > > > > > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>>>>>> > > > >
>>>>>> > > > >
>>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>>> > > > >
>>>>>> > > > > > > > >FL
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > >V_
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > >5.flv, -vcodec,
>>>>>> > > > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo,
>>>>>> -s,
>>>>>> > > > > > > > > > > > > > > > 256x240,
>>>>>> > > > >
>>>>>> > > > >
>>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>>> > > > >
>>>>>> > > > > > > > >FL
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > >V_
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > >5.jpg] Name: error
>>>>>> > > > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402,
>>>>>> Copyright (c)
>>>>>> > > > > > > > > > > > > > > > 2000-2011 the
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > FFmpeg
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > developers
>>>>>> > > > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with
>>>>>> gcc 4.4.6
>>>>>> > > > >
>>>>>> > > > > 20120305
>>>>>> > > > >
>>>>>> > > > > > > > > > > > > > > > (Red Hat
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > 4.4.6-4)
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > configuration: --enable-libmp3lame
>>>>>> > > > > > > > > > > > > > > > --enable-postproc --enable-gpl
>>>>>> > > > > > > > > > > > > > > > --enable-pthreads --enable-avfilter
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > --prefix=/usr
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>>>>>> > > > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>>>>>> > > > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>>>>>> > > > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>>>>>> > > > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>>>>>> > > > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>>>>>> > > > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>>>>>> > > > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>>>>>> > > > >
>>>>>> > > > >
>>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>>> > > > >
>>>>>> > > > > > > > >FL
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > >V_
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > >5.flv: Invalid data found when
>>>>>> processing input
>>>>>> > > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > Name: process
>>>>>> > > > > > > > > > > > > > > > Value: previewUpload ID :: 5
>>>>>> > > > > > > > > > > > > > > > Name: exitValue
>>>>>> > > > > > > > > > > > > > > > Value: 0
>>>>>> > > > > > > > > > > > > > > > Name: command
>>>>>> > > > > > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > > > > > > Name: completeName
>>>>>> > > > > > > > > > > > > > > > Value:
>>>>>> > > > >
>>>>>> > > > >
>>>>>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
>>>>>> > > > >
>>>>>> > > > > > > > >21
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > > > >36
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
>>>>>> > > > > > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > > > > > > Name: fileExplorerItemId
>>>>>> > > > > > > > > > > > > > > > Value: 5
>>>>>> > > > > > > > > > > > > > > > Name: process
>>>>>> > > > > > > > > > > > > > > > Value:
>>>>>> > > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > I'm unable to interpret this output.
>>>>>> Your
>>>>>> > > > > > > > > > > > > > > > assistance in solving would
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > be
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > appreciated, as ever.
>>>>>> > > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > Dimitri
>>>>>> > > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > > --
>>>>>> > > > > > > > > > > > > > > > This message has been scanned for
>>>>>> viruses and
>>>>>> > > > > > > > > > > > > > > > dangerous content by MailScanner, and is
>>>>>> > > > > > > > > > > > > > > > believed to be clean.
>>>>>> > > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > > --
>>>>>> > > > > > > > > > > > > > > Sebastian Wagner
>>>>>> > > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>>>>>> > > > > > > > > > > > > > > http://www.webbase-design.de
>>>>>> > > > > > > > > > > > > > > http://www.wagner-sebastian.com
>>>>>> > > > > > > > > > > > > > > seba.wagner@gmail.com
>>>>>> > > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > > --
>>>>>> > > > > > > > > > > > > > This message has been scanned for viruses
>>>>>> and
>>>>>> > > > > > > > > > > > > > dangerous content by MailScanner, and is
>>>>>> > > > > > > > > > > > > > believed to be clean.
>>>>>> > > > > > > > > > > > >
>>>>>> > > > > > > > > > > > > --
>>>>>> > > > > > > > > > > > > Sebastian Wagner
>>>>>> > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>>>>>> > > > > > > > > > > > > http://www.webbase-design.de
>>>>>> > > > > > > > > > > > > http://www.wagner-sebastian.com
>>>>>> > > > > > > > > > > > > seba.wagner@gmail.com
>>>>>> > > > > > > > > > > >
>>>>>> > > > > > > > > > > > --
>>>>>> > > > > > > > > > > > This message has been scanned for viruses and
>>>>>> > > > > > > > > > > > dangerous content by MailScanner, and is
>>>>>> > > > > > > > > > > > believed to be clean.
>>>>>> > > > > > > > > > >
>>>>>> > > > > > > > > > > --
>>>>>> > > > > > > > > > > Sebastian Wagner
>>>>>> > > > > > > > > > > https://twitter.com/#!/dead_lock
>>>>>> > > > > > > > > > > http://www.webbase-design.de
>>>>>> > > > > > > > > > > http://www.wagner-sebastian.com
>>>>>> > > > > > > > > > > seba.wagner@gmail.com
>>>>>> > > > > > > > >
>>>>>> > > > > > > > > --
>>>>>> > > > > > > > > This message has been scanned for viruses and
>>>>>> > > > > > > > > dangerous content by MailScanner, and is
>>>>>> > > > > > > > > believed to be clean.
>>>>>> > > > > > > >
>>>>>> > > > > > > > --
>>>>>> > > > > > > > Sebastian Wagner
>>>>>> > > > > > > > https://twitter.com/#!/dead_lock
>>>>>> > > > > > > > http://www.webbase-design.de
>>>>>> > > > > > > > http://www.wagner-sebastian.com
>>>>>> > > > > > > > seba.wagner@gmail.com
>>>>>> > > > > > >
>>>>>> > > > > > > --
>>>>>> > > > > > > This message has been scanned for viruses and
>>>>>> > > > > > > dangerous content by MailScanner, and is
>>>>>> > > > > > > believed to be clean.
>>>>>> > > > > >
>>>>>> > > > > > --
>>>>>> > > > > > WBR
>>>>>> > > > > > Maxim aka solomax
>>>>>> > > > >
>>>>>> > > > > --
>>>>>> > > > > This message has been scanned for viruses and
>>>>>> > > > > dangerous content by MailScanner, and is
>>>>>> > > > > believed to be clean.
>>>>>> > > >
>>>>>> > > > --
>>>>>> > > > WBR
>>>>>> > > > Maxim aka solomax
>>>>>> > >
>>>>>> > > --
>>>>>> > > This message has been scanned for viruses and
>>>>>> > > dangerous content by MailScanner, and is
>>>>>> > > believed to be clean.
>>>>>> >
>>>>>> > --
>>>>>> > Sebastian Wagner
>>>>>> > https://twitter.com/#!/dead_lock
>>>>>> > http://www.webbase-design.de
>>>>>> > http://www.wagner-sebastian.com
>>>>>> > seba.wagner@gmail.com
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> This message has been scanned for viruses and
>>>>>> dangerous content by MailScanner, and is
>>>>>> believed to be clean.
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Sebastian Wagner
>>>>> https://twitter.com/#!/dead_lock
>>>>> http://www.webbase-design.de
>>>>> http://www.wagner-sebastian.com
>>>>> seba.wagner@gmail.com
>>>>>
>>>>
>>>>
>>>
>>
>
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wagner@gmail.com
>
Re: Streaming video
Posted by "seba.wagner@gmail.com" <se...@gmail.com>.
this will only pause the video locally.
You need to:
In the whiteboard object that is stored in the server side session, there
is a "video" object (similar to drawings, a whiteboard video has some meta
info stored in the server side session, any new user that enters the room
will load the session object of the whiteboards from the server).
This "video-object" needs a new flag: paused
If the user clicks on the "pause" button an event must be send from the
client to the server, update the flag "paused" in the server session's
"video-object" and broadcast a message to all connected users, that there
is an update of the "pause" flag (usually you send the whole session object
of the "video-object" and just change that "paused" flag to true).
Now every client must have handlers to react on changes to this flag.
Additionally when a new user enters the room, while the video is paused,
the video must be loaded but paused (and if the user clicks "un-pause" the
stream must continue on all whiteboards at the same time (this is a bit
more tricky cause a simply play will _not_ work as the user that enters the
room must seek to the place where the other users currently see the video).
Eventually it makes sense that if a new user enters the room, while the
video is paused, you first seek to the current position of the video and
then directly pause it, that way the new user also see's the same image in
the video and you can simply call "play" (or NetStream.pause(false)) on all
streams without checking the timestamp first.
So there is a bit more work involved here then simple start/stop the video
:)
=> You have to sync all users
=> You need to take care that new users that enter the room see the same
thing everybody does
=> "Unpausing" the video must show the same position in the video on all
screens.
Sebastian
2012/11/16 RM P <by...@gmail.com>
> Hi Sebastian,
>
> I did little investigations to see what code changes are required. I would
> appreciate your inputs on the following. Can you please let me know your
> views on further implementations. Appreciate your feedback. thanks, Manohar
>
>
> filename - > whiteboardvideoplayer.lzx
>
> *calling "canvas.sendViaLocalConnection" with method name to play and
> stop video.*
> *Need to add pause method here.*
>
> filename -> hibAdapter.lzx
>
> *Need to implement a pause similar to what has been done for
> "pauseRecordingPlayback"*
> * <method name="pauseRecordingPlayback" args="pauseBool">
> if($debug) Debug.write("pauseRecordingPlayback ");
> if (this.baseVideoStream == null) {
> if ($debug) Debug.warn("baseVideoStream is NULL");
> return;
> }
> this.baseVideoStream.pause(pauseBool);
> </method>*
>
>
>
>
> On Fri, Nov 9, 2012 at 11:33 AM, RM P <by...@gmail.com> wrote:
>
>> HI Sebastian,
>>
>> can you please guide on to make video stream - pause and seek functional.
>> I believe the code is in place and looking for few pointers which will help.
>>
>> Appreciate your response.
>>
>> thanks
>> Manohar
>>
>> On Tue, Nov 6, 2012 at 4:57 PM, RM P <by...@gmail.com> wrote:
>>
>>> Hi Sebastian,
>>>
>>> can you please provide on which files need to be changed to incorporate
>>> additional controls like pause, seek etc.
>>>
>>> appreciate your reply.
>>>
>>> thanks,
>>> Manohar
>>>
>>> On Thu, Aug 9, 2012 at 8:14 PM, seba.wagner@gmail.com <
>>> seba.wagner@gmail.com> wrote:
>>>
>>>> Well then possibly the pause is not implemented either.
>>>> You can only stop and play the videos then "synchronized" between you
>>>> and the other conference participants.
>>>>
>>>>
>>>> Sebastian
>>>>
>>>> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>>
>>>>> Sebastian,
>>>>>
>>>>> Clicking on the video didn't work, but that could just be me.
>>>>>
>>>>> Dimitri
>>>>>
>>>>>
>>>>> On Thursday 09 August 2012 10:37:15 am seba.wagner@gmail.com wrote:
>>>>> > I think you can pause if you simply click on the video.
>>>>> > Seek is not implemented however.
>>>>> >
>>>>> > Sebastian
>>>>> >
>>>>> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>>> >
>>>>> > > Maxim,
>>>>> > >
>>>>> > > Sorry I made you go through that, when a little digging on my part
>>>>> would
>>>>> > > have
>>>>> > > solved the problem. But, a related question:
>>>>> > >
>>>>> > > there's currently no ability to pause a video (or, at least none
>>>>> that I
>>>>> > > can see). From a development standpoint, is that doable and, if
>>>>> so,
>>>>> > > might that be
>>>>> > > added as a feature request?
>>>>> > >
>>>>> > > Dimitri
>>>>> > >
>>>>> > > On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
>>>>> > > > OK
>>>>> > > >
>>>>> > > > the longer steps :)
>>>>> > > > 1) file upload
>>>>> > > > 2) select file
>>>>> > > > 3) upload file
>>>>> > > > 4) wait until file is uploaded and appear under private or
>>>>> public files
>>>>> > > > 5) drag file from private or public files and drop it to the
>>>>> whiteboard
>>>>> > > >
>>>>> > > > just tested it on 2.1 works for me
>>>>> > > >
>>>>> > > > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <
>>>>> dyioulos@onpointfc.com
>>>>> > > >
>>>>> > > >wrote:
>>>>> > > > > Maxim,
>>>>> > > > >
>>>>> > > > > In the OM files tab, the only option is "File upload". If I
>>>>> use
>>>>> > > > > that,
>>>>> > >
>>>>> > > do
>>>>> > >
>>>>> > > > > a "select file", find my file, then drag-and-drop to
>>>>> whiteboard, it
>>>>> > > > > doesn't work.
>>>>> > > > >
>>>>> > > > > Dimitri
>>>>> > > > >
>>>>> > > > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
>>>>> > > > > > Open Files tab
>>>>> > > > > > drag your video to the whiteboard
>>>>> > > > > >
>>>>> > > > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
>>>>> > >
>>>>> > > dyioulos@onpointfc.com
>>>>> > >
>>>>> > > > > >wrote:
>>>>> > > > > > > "You might have to goto the file explorer and load it from
>>>>> there
>>>>> > > > > > > to the whiteboard."
>>>>> > > > > > >
>>>>> > > > > > > Er, how do I do that?
>>>>> > > > > > >
>>>>> > > > > > > Dimitri
>>>>> > > > > > >
>>>>> > > > > > > On Thursday 09 August 2012 9:58:54 am
>>>>> seba.wagner@gmail.com wrote:
>>>>> > > > > > > > * it never appears in the whiteboard.*
>>>>> > > > > > > > => but it is in the file explorer itself? Maybe just the
>>>>> > > > > > > > checkbox on the bottom of the upload window is not
>>>>> working
>>>>> > > > > > > > correctly for video files. You might have to goto the
>>>>> file
>>>>> > > > > > > > explorer and load it from
>>>>> > > > >
>>>>> > > > > there
>>>>> > > > >
>>>>> > > > > > > > to the whiteboard.
>>>>> > > > > > > >
>>>>> > > > > > > > Sebastian
>>>>> > > > > > > >
>>>>> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>>> > > > > > > >
>>>>> > > > > > > > > Spoke too soon (will I never learn). When I try to
>>>>> upload my
>>>>> > >
>>>>> > > avi
>>>>> > >
>>>>> > > > > > > > > (and, it does
>>>>> > > > > > > > > play in VLC), the UI dialog box shows that it's
>>>>> uploaded and
>>>>> > > > > > > > > converted. However, it never appears in the
>>>>> whiteboard. And,
>>>>> > > > > > > > > there are no errors.
>>>>> > > > > > > > >
>>>>> > > > > > > > > Ideas?
>>>>> > > > > > > > >
>>>>> > > > > > > > > Dimitri
>>>>> > > > > > > > >
>>>>> > > > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos
>>>>> wrote:
>>>>> > > > > > > > > > Sebastian,
>>>>> > > > > > > > > >
>>>>> > > > > > > > > > Well, I'm embarrassed. The avi I tired did not, in
>>>>> fact,
>>>>> > >
>>>>> > > work
>>>>> > >
>>>>> > > > > with
>>>>> > > > >
>>>>> > > > > > > > > > VLC.
>>>>> > > > > > > > >
>>>>> > > > > > > > > I
>>>>> > > > > > > > >
>>>>> > > > > > > > > > found another test avi, and it uploaded in OM just
>>>>> fine.
>>>>> > > > > > > > > >
>>>>> > > > > > > > > > Apologies for the noise.
>>>>> > > > > > > > > >
>>>>> > > > > > > > > > Dimitri
>>>>> > > > > > > > > >
>>>>> > > > > > > > > > On Thursday 09 August 2012 9:00:16 am
>>>>> > >
>>>>> > > seba.wagner@gmail.comwrote:
>>>>> > > > > > > > > > > Does the file:
>>>>> > > > > > > > > > > /usr/local/openmeetings/
>>>>> > > > > > > > > > >
>>>>> webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
>>>>> > > > > > > > > > > exist?
>>>>> > > > > > > > > > > Can you download and watch it using VLC-Player or
>>>>> any
>>>>> > > > > > > > > > > other
>>>>> > > > >
>>>>> > > > > Video
>>>>> > > > >
>>>>> > > > > > > > > player?
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > Sebastian
>>>>> > > > > > > > > > >
>>>>> > > > > > > > > > >
>>>>> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>>> > > > > > > > > > >
>>>>> > > > > > > > > > > > Sebastian,
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > This is all the output from the UI:
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > Name: out
>>>>> > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > > Name: exitValue
>>>>> > > > > > > > > > > > Value: 1
>>>>> > > > > > > > > > > > Name: command
>>>>> > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>>>>> > > > >
>>>>> > > > >
>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>> > > > >
>>>>> > > > > > > > >FL
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > >V_ 6.flv, -vcodec,
>>>>> > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
>>>>> > > > > > > > > > > > 256x240,
>>>>> > > > >
>>>>> > > > >
>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>> > > > >
>>>>> > > > > > > > >FL
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > >V_ 6.jpg] Name: error
>>>>> > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
>>>>> > > > > > > > > > > > 2000-2011 the FFmpeg developers
>>>>> > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
>>>>> 20120305
>>>>> > > > > > > > > > > > (Red Hat 4.4.6-4)
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > configuration: --enable-libmp3lame
>>>>> --enable-postproc
>>>>> > > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
>>>>> > > > >
>>>>> > > > > --prefix=/usr
>>>>> > > > >
>>>>> > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>>>>> > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>>>>> > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>>>>> > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>>>>> > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>>>>> > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>>>>> > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>>>>> > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>>>>> > > > >
>>>>> > > > >
>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>> > > > >
>>>>> > > > > > > > >FL
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > >V_ 6.flv: Invalid data found when processing input
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > Name: process
>>>>> > > > > > > > > > > > Value: previewUpload ID :: 6
>>>>> > > > > > > > > > > > Name: exitValue
>>>>> > > > > > > > > > > > Value: 0
>>>>> > > > > > > > > > > > Name: command
>>>>> > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > > Name: completeName
>>>>> > > > > > > > > > > > Value:
>>>>> > > > >
>>>>> > > > >
>>>>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
>>>>> > > > >
>>>>> > > > > > > > >5a
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
>>>>> > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > > Name: fileExplorerItemId
>>>>> > > > > > > > > > > > Value: 6
>>>>> > > > > > > > > > > > Name: process
>>>>> > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > Dimitri
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
>>>>> > > > >
>>>>> > > > > seba.wagner@gmail.comwrote:
>>>>> > > > > > > > > > > > > *I just copied what appeared in the OM
>>>>> instance*
>>>>> > > > > > > > > > > > > => I donn't think so. Did you scroll or do
>>>>> "ctrl-a"
>>>>> > > > > > > > > > > > > before you
>>>>> > > > > > > > >
>>>>> > > > > > > > > copied
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > > > the content?
>>>>> > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > The error message in the UI should be
>>>>> sufficient. No
>>>>> > >
>>>>> > > need
>>>>> > >
>>>>> > > > > to
>>>>> > > > >
>>>>> > > > > > > > > > > > > search for anything in the logs at this point.
>>>>> > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > Sebastian
>>>>> > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
>>>>> dyioulos@onpointfc.com>
>>>>> > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > Hi, Sebastian.
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > I just copied what appeared in the OM
>>>>> instance on
>>>>> > > > > > > > > > > > > > my desktop
>>>>> > > > > > > > >
>>>>> > > > > > > > > when I
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > > tried
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > to
>>>>> > > > > > > > > > > > > > upload the avi. Error.log in the OM log
>>>>> directory
>>>>> > > > > > > > > > > > > > is empty.
>>>>> > > > > > > > >
>>>>> > > > > > > > > Would
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > > > > I find the
>>>>> > > > > > > > > > > > > > output in red5.log or openmeetings.log?
>>>>> What would
>>>>> > > > > > > > > > > > > > I
>>>>> > > > >
>>>>> > > > > grep
>>>>> > > > >
>>>>> > > > > > > on?
>>>>> > > > > > >
>>>>> > > > > > > > > > > > > > Thanks.
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > Dimitri
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
>>>>> > > > > > >
>>>>> > > > > > > seba.wagner@gmail.comwrote:
>>>>> > > > > > > > > > > > > > > I don' think you've copied the whole error
>>>>> log.
>>>>> > > > > > > > > > > > > > > The conversation log error is much longer.
>>>>> You
>>>>> > > > > > > > > > > > > > > just copied the final
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > lines
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > that convert a screenshot for the preview
>>>>> of the
>>>>> > > > > > > > > > > > > > > video. The actual error already happened
>>>>> before
>>>>> > >
>>>>> > > when
>>>>> > >
>>>>> > > > > > > > > > > > > > > the video was converted to
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > a
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > FLV, the FLV is either broken or was never
>>>>> > > > > > > > > > > > > > > successfully created from the given file.
>>>>> > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > Sebastian
>>>>> > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
>>>>> dyioulos@onpointfc.com>
>>>>> > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > Good morning (or afternoon, as the case
>>>>> may
>>>>> > > > > > > > > > > > > > > > be), all.
>>>>> > > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > Just a brief aside: after setting up OM
>>>>> 2.0,
>>>>> > > > > > > > > > > > > > > > with the
>>>>> > > > > > >
>>>>> > > > > > > help
>>>>> > > > > > >
>>>>> > > > > > > > > > > > > > > > of
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > Maxim,
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > Alexei, and
>>>>> > > > > > > > > > > > > > > > others, I completely blew up the VM it
>>>>> was
>>>>> > > > > > > > > > > > > > > > loaded on. It was my non-OM mistake
>>>>> > > > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable
>>>>> > > > > > > > > > > > > > > > (hadn't
>>>>> > > > >
>>>>> > > > > backed
>>>>> > > > >
>>>>> > > > > > > up
>>>>> > > > > > >
>>>>> > > > > > > > > the
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > > > > > > VM, either. Arrgh.). So I created a new
>>>>> VM,
>>>>> > > > > > > > > > > > > > > > and
>>>>> > > > >
>>>>> > > > > added
>>>>> > > > >
>>>>> > > > > > > > > > > > > > > > OM
>>>>> > > > > > > > >
>>>>> > > > > > > > > 2.0.
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > > > > > > It was your kind and spot-on answers to
>>>>> my
>>>>> > >
>>>>> > > previous
>>>>> > >
>>>>> > > > > > > > > > > > > > > > questions that allowed me to
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > get
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > my install working properly. Again, my
>>>>> > > > > > > > > > > > > > > > heartfelt thanks.
>>>>> > > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > Now, to a new question. I've tried to
>>>>> upload
>>>>> > > > > > > > > > > > > > > > and stream
>>>>> > > > > > >
>>>>> > > > > > > a
>>>>> > > > > > >
>>>>> > > > > > > > > > > > > > > > small
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > test
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > avi. But,
>>>>> > > > > > > > > > > > > > > > the upload fails, with this output:
>>>>> > > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > Name: out
>>>>> > > > > > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > > > > > > Name: exitValue
>>>>> > > > > > > > > > > > > > > > Value: 1
>>>>> > > > > > > > > > > > > > > > Name: command
>>>>> > > > > > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>>>>> > > > >
>>>>> > > > >
>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>> > > > >
>>>>> > > > > > > > >FL
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > >V_
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > >5.flv, -vcodec,
>>>>> > > > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo,
>>>>> -s,
>>>>> > > > > > > > > > > > > > > > 256x240,
>>>>> > > > >
>>>>> > > > >
>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>> > > > >
>>>>> > > > > > > > >FL
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > >V_
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > >5.jpg] Name: error
>>>>> > > > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402,
>>>>> Copyright (c)
>>>>> > > > > > > > > > > > > > > > 2000-2011 the
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > FFmpeg
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > developers
>>>>> > > > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc
>>>>> 4.4.6
>>>>> > > > >
>>>>> > > > > 20120305
>>>>> > > > >
>>>>> > > > > > > > > > > > > > > > (Red Hat
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > 4.4.6-4)
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > configuration: --enable-libmp3lame
>>>>> > > > > > > > > > > > > > > > --enable-postproc --enable-gpl
>>>>> > > > > > > > > > > > > > > > --enable-pthreads --enable-avfilter
>>>>> > > > > > > > >
>>>>> > > > > > > > > --prefix=/usr
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>>>>> > > > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>>>>> > > > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>>>>> > > > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>>>>> > > > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>>>>> > > > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>>>>> > > > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>>>>> > > > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>>>>> > > > >
>>>>> > > > >
>>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>>> > > > >
>>>>> > > > > > > > >FL
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > >V_
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > >5.flv: Invalid data found when processing
>>>>> input
>>>>> > > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > Name: process
>>>>> > > > > > > > > > > > > > > > Value: previewUpload ID :: 5
>>>>> > > > > > > > > > > > > > > > Name: exitValue
>>>>> > > > > > > > > > > > > > > > Value: 0
>>>>> > > > > > > > > > > > > > > > Name: command
>>>>> > > > > > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > > > > > > Name: completeName
>>>>> > > > > > > > > > > > > > > > Value:
>>>>> > > > >
>>>>> > > > >
>>>>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
>>>>> > > > >
>>>>> > > > > > > > >21
>>>>> > > > > > > > >
>>>>> > > > > > > > > > > >36
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
>>>>> > > > > > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > > > > > > Name: fileExplorerItemId
>>>>> > > > > > > > > > > > > > > > Value: 5
>>>>> > > > > > > > > > > > > > > > Name: process
>>>>> > > > > > > > > > > > > > > > Value:
>>>>> > > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > I'm unable to interpret this output.
>>>>> Your
>>>>> > > > > > > > > > > > > > > > assistance in solving would
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > be
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > appreciated, as ever.
>>>>> > > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > Dimitri
>>>>> > > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > > --
>>>>> > > > > > > > > > > > > > > > This message has been scanned for
>>>>> viruses and
>>>>> > > > > > > > > > > > > > > > dangerous content by MailScanner, and is
>>>>> > > > > > > > > > > > > > > > believed to be clean.
>>>>> > > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > > --
>>>>> > > > > > > > > > > > > > > Sebastian Wagner
>>>>> > > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>>>>> > > > > > > > > > > > > > > http://www.webbase-design.de
>>>>> > > > > > > > > > > > > > > http://www.wagner-sebastian.com
>>>>> > > > > > > > > > > > > > > seba.wagner@gmail.com
>>>>> > > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > > --
>>>>> > > > > > > > > > > > > > This message has been scanned for viruses and
>>>>> > > > > > > > > > > > > > dangerous content by MailScanner, and is
>>>>> > > > > > > > > > > > > > believed to be clean.
>>>>> > > > > > > > > > > > >
>>>>> > > > > > > > > > > > > --
>>>>> > > > > > > > > > > > > Sebastian Wagner
>>>>> > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>>>>> > > > > > > > > > > > > http://www.webbase-design.de
>>>>> > > > > > > > > > > > > http://www.wagner-sebastian.com
>>>>> > > > > > > > > > > > > seba.wagner@gmail.com
>>>>> > > > > > > > > > > >
>>>>> > > > > > > > > > > > --
>>>>> > > > > > > > > > > > This message has been scanned for viruses and
>>>>> > > > > > > > > > > > dangerous content by MailScanner, and is
>>>>> > > > > > > > > > > > believed to be clean.
>>>>> > > > > > > > > > >
>>>>> > > > > > > > > > > --
>>>>> > > > > > > > > > > Sebastian Wagner
>>>>> > > > > > > > > > > https://twitter.com/#!/dead_lock
>>>>> > > > > > > > > > > http://www.webbase-design.de
>>>>> > > > > > > > > > > http://www.wagner-sebastian.com
>>>>> > > > > > > > > > > seba.wagner@gmail.com
>>>>> > > > > > > > >
>>>>> > > > > > > > > --
>>>>> > > > > > > > > This message has been scanned for viruses and
>>>>> > > > > > > > > dangerous content by MailScanner, and is
>>>>> > > > > > > > > believed to be clean.
>>>>> > > > > > > >
>>>>> > > > > > > > --
>>>>> > > > > > > > Sebastian Wagner
>>>>> > > > > > > > https://twitter.com/#!/dead_lock
>>>>> > > > > > > > http://www.webbase-design.de
>>>>> > > > > > > > http://www.wagner-sebastian.com
>>>>> > > > > > > > seba.wagner@gmail.com
>>>>> > > > > > >
>>>>> > > > > > > --
>>>>> > > > > > > This message has been scanned for viruses and
>>>>> > > > > > > dangerous content by MailScanner, and is
>>>>> > > > > > > believed to be clean.
>>>>> > > > > >
>>>>> > > > > > --
>>>>> > > > > > WBR
>>>>> > > > > > Maxim aka solomax
>>>>> > > > >
>>>>> > > > > --
>>>>> > > > > This message has been scanned for viruses and
>>>>> > > > > dangerous content by MailScanner, and is
>>>>> > > > > believed to be clean.
>>>>> > > >
>>>>> > > > --
>>>>> > > > WBR
>>>>> > > > Maxim aka solomax
>>>>> > >
>>>>> > > --
>>>>> > > This message has been scanned for viruses and
>>>>> > > dangerous content by MailScanner, and is
>>>>> > > believed to be clean.
>>>>> >
>>>>> > --
>>>>> > Sebastian Wagner
>>>>> > https://twitter.com/#!/dead_lock
>>>>> > http://www.webbase-design.de
>>>>> > http://www.wagner-sebastian.com
>>>>> > seba.wagner@gmail.com
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> This message has been scanned for viruses and
>>>>> dangerous content by MailScanner, and is
>>>>> believed to be clean.
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Sebastian Wagner
>>>> https://twitter.com/#!/dead_lock
>>>> http://www.webbase-design.de
>>>> http://www.wagner-sebastian.com
>>>> seba.wagner@gmail.com
>>>>
>>>
>>>
>>
>
--
Sebastian Wagner
https://twitter.com/#!/dead_lock
http://www.webbase-design.de
http://www.wagner-sebastian.com
seba.wagner@gmail.com
Re: Streaming video
Posted by RM P <by...@gmail.com>.
Hi Sebastian,
I did little investigations to see what code changes are required. I would
appreciate your inputs on the following. Can you please let me know your
views on further implementations. Appreciate your feedback. thanks, Manohar
filename - > whiteboardvideoplayer.lzx
*calling "canvas.sendViaLocalConnection" with method name to play and stop
video.*
*Need to add pause method here.*
filename -> hibAdapter.lzx
*Need to implement a pause similar to what has been done for
"pauseRecordingPlayback"*
* <method name="pauseRecordingPlayback" args="pauseBool">
if($debug) Debug.write("pauseRecordingPlayback ");
if (this.baseVideoStream == null) {
if ($debug) Debug.warn("baseVideoStream is NULL");
return;
}
this.baseVideoStream.pause(pauseBool);
</method>*
On Fri, Nov 9, 2012 at 11:33 AM, RM P <by...@gmail.com> wrote:
> HI Sebastian,
>
> can you please guide on to make video stream - pause and seek functional.
> I believe the code is in place and looking for few pointers which will help.
>
> Appreciate your response.
>
> thanks
> Manohar
>
> On Tue, Nov 6, 2012 at 4:57 PM, RM P <by...@gmail.com> wrote:
>
>> Hi Sebastian,
>>
>> can you please provide on which files need to be changed to incorporate
>> additional controls like pause, seek etc.
>>
>> appreciate your reply.
>>
>> thanks,
>> Manohar
>>
>> On Thu, Aug 9, 2012 at 8:14 PM, seba.wagner@gmail.com <
>> seba.wagner@gmail.com> wrote:
>>
>>> Well then possibly the pause is not implemented either.
>>> You can only stop and play the videos then "synchronized" between you
>>> and the other conference participants.
>>>
>>>
>>> Sebastian
>>>
>>> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>
>>>> Sebastian,
>>>>
>>>> Clicking on the video didn't work, but that could just be me.
>>>>
>>>> Dimitri
>>>>
>>>>
>>>> On Thursday 09 August 2012 10:37:15 am seba.wagner@gmail.com wrote:
>>>> > I think you can pause if you simply click on the video.
>>>> > Seek is not implemented however.
>>>> >
>>>> > Sebastian
>>>> >
>>>> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>> >
>>>> > > Maxim,
>>>> > >
>>>> > > Sorry I made you go through that, when a little digging on my part
>>>> would
>>>> > > have
>>>> > > solved the problem. But, a related question:
>>>> > >
>>>> > > there's currently no ability to pause a video (or, at least none
>>>> that I
>>>> > > can see). From a development standpoint, is that doable and, if so,
>>>> > > might that be
>>>> > > added as a feature request?
>>>> > >
>>>> > > Dimitri
>>>> > >
>>>> > > On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
>>>> > > > OK
>>>> > > >
>>>> > > > the longer steps :)
>>>> > > > 1) file upload
>>>> > > > 2) select file
>>>> > > > 3) upload file
>>>> > > > 4) wait until file is uploaded and appear under private or public
>>>> files
>>>> > > > 5) drag file from private or public files and drop it to the
>>>> whiteboard
>>>> > > >
>>>> > > > just tested it on 2.1 works for me
>>>> > > >
>>>> > > > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <
>>>> dyioulos@onpointfc.com
>>>> > > >
>>>> > > >wrote:
>>>> > > > > Maxim,
>>>> > > > >
>>>> > > > > In the OM files tab, the only option is "File upload". If I use
>>>> > > > > that,
>>>> > >
>>>> > > do
>>>> > >
>>>> > > > > a "select file", find my file, then drag-and-drop to
>>>> whiteboard, it
>>>> > > > > doesn't work.
>>>> > > > >
>>>> > > > > Dimitri
>>>> > > > >
>>>> > > > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
>>>> > > > > > Open Files tab
>>>> > > > > > drag your video to the whiteboard
>>>> > > > > >
>>>> > > > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
>>>> > >
>>>> > > dyioulos@onpointfc.com
>>>> > >
>>>> > > > > >wrote:
>>>> > > > > > > "You might have to goto the file explorer and load it from
>>>> there
>>>> > > > > > > to the whiteboard."
>>>> > > > > > >
>>>> > > > > > > Er, how do I do that?
>>>> > > > > > >
>>>> > > > > > > Dimitri
>>>> > > > > > >
>>>> > > > > > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.comwrote:
>>>> > > > > > > > * it never appears in the whiteboard.*
>>>> > > > > > > > => but it is in the file explorer itself? Maybe just the
>>>> > > > > > > > checkbox on the bottom of the upload window is not working
>>>> > > > > > > > correctly for video files. You might have to goto the file
>>>> > > > > > > > explorer and load it from
>>>> > > > >
>>>> > > > > there
>>>> > > > >
>>>> > > > > > > > to the whiteboard.
>>>> > > > > > > >
>>>> > > > > > > > Sebastian
>>>> > > > > > > >
>>>> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>> > > > > > > >
>>>> > > > > > > > > Spoke too soon (will I never learn). When I try to
>>>> upload my
>>>> > >
>>>> > > avi
>>>> > >
>>>> > > > > > > > > (and, it does
>>>> > > > > > > > > play in VLC), the UI dialog box shows that it's
>>>> uploaded and
>>>> > > > > > > > > converted. However, it never appears in the whiteboard.
>>>> And,
>>>> > > > > > > > > there are no errors.
>>>> > > > > > > > >
>>>> > > > > > > > > Ideas?
>>>> > > > > > > > >
>>>> > > > > > > > > Dimitri
>>>> > > > > > > > >
>>>> > > > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos
>>>> wrote:
>>>> > > > > > > > > > Sebastian,
>>>> > > > > > > > > >
>>>> > > > > > > > > > Well, I'm embarrassed. The avi I tired did not, in
>>>> fact,
>>>> > >
>>>> > > work
>>>> > >
>>>> > > > > with
>>>> > > > >
>>>> > > > > > > > > > VLC.
>>>> > > > > > > > >
>>>> > > > > > > > > I
>>>> > > > > > > > >
>>>> > > > > > > > > > found another test avi, and it uploaded in OM just
>>>> fine.
>>>> > > > > > > > > >
>>>> > > > > > > > > > Apologies for the noise.
>>>> > > > > > > > > >
>>>> > > > > > > > > > Dimitri
>>>> > > > > > > > > >
>>>> > > > > > > > > > On Thursday 09 August 2012 9:00:16 am
>>>> > >
>>>> > > seba.wagner@gmail.comwrote:
>>>> > > > > > > > > > > Does the file:
>>>> > > > > > > > > > > /usr/local/openmeetings/
>>>> > > > > > > > > > >
>>>> webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
>>>> > > > > > > > > > > exist?
>>>> > > > > > > > > > > Can you download and watch it using VLC-Player or
>>>> any
>>>> > > > > > > > > > > other
>>>> > > > >
>>>> > > > > Video
>>>> > > > >
>>>> > > > > > > > > player?
>>>> > > > > > > > >
>>>> > > > > > > > > > > Sebastian
>>>> > > > > > > > > > >
>>>> > > > > > > > > > >
>>>> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>>> > > > > > > > > > >
>>>> > > > > > > > > > > > Sebastian,
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > This is all the output from the UI:
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > Name: out
>>>> > > > > > > > > > > > Value:
>>>> > > > > > > > > > > > Name: exitValue
>>>> > > > > > > > > > > > Value: 1
>>>> > > > > > > > > > > > Name: command
>>>> > > > > > > > > > > > Value:
>>>> > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>>>> > > > >
>>>> > > > >
>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>> > > > >
>>>> > > > > > > > >FL
>>>> > > > > > > > >
>>>> > > > > > > > > > > >V_ 6.flv, -vcodec,
>>>> > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
>>>> > > > > > > > > > > > 256x240,
>>>> > > > >
>>>> > > > >
>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>> > > > >
>>>> > > > > > > > >FL
>>>> > > > > > > > >
>>>> > > > > > > > > > > >V_ 6.jpg] Name: error
>>>> > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
>>>> > > > > > > > > > > > 2000-2011 the FFmpeg developers
>>>> > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
>>>> 20120305
>>>> > > > > > > > > > > > (Red Hat 4.4.6-4)
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > configuration: --enable-libmp3lame
>>>> --enable-postproc
>>>> > > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
>>>> > > > >
>>>> > > > > --prefix=/usr
>>>> > > > >
>>>> > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>>>> > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>>>> > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>>>> > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>>>> > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>>>> > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>>>> > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>>>> > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>>>> > > > >
>>>> > > > >
>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>> > > > >
>>>> > > > > > > > >FL
>>>> > > > > > > > >
>>>> > > > > > > > > > > >V_ 6.flv: Invalid data found when processing input
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > Name: process
>>>> > > > > > > > > > > > Value: previewUpload ID :: 6
>>>> > > > > > > > > > > > Name: exitValue
>>>> > > > > > > > > > > > Value: 0
>>>> > > > > > > > > > > > Name: command
>>>> > > > > > > > > > > > Value:
>>>> > > > > > > > > > > > Name: completeName
>>>> > > > > > > > > > > > Value:
>>>> > > > >
>>>> > > > >
>>>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
>>>> > > > >
>>>> > > > > > > > >5a
>>>> > > > > > > > >
>>>> > > > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
>>>> > > > > > > > > > > > Value:
>>>> > > > > > > > > > > > Name: fileExplorerItemId
>>>> > > > > > > > > > > > Value: 6
>>>> > > > > > > > > > > > Name: process
>>>> > > > > > > > > > > > Value:
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > Dimitri
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
>>>> > > > >
>>>> > > > > seba.wagner@gmail.comwrote:
>>>> > > > > > > > > > > > > *I just copied what appeared in the OM instance*
>>>> > > > > > > > > > > > > => I donn't think so. Did you scroll or do
>>>> "ctrl-a"
>>>> > > > > > > > > > > > > before you
>>>> > > > > > > > >
>>>> > > > > > > > > copied
>>>> > > > > > > > >
>>>> > > > > > > > > > > > > the content?
>>>> > > > > > > > > > > > >
>>>> > > > > > > > > > > > > The error message in the UI should be
>>>> sufficient. No
>>>> > >
>>>> > > need
>>>> > >
>>>> > > > > to
>>>> > > > >
>>>> > > > > > > > > > > > > search for anything in the logs at this point.
>>>> > > > > > > > > > > > >
>>>> > > > > > > > > > > > > Sebastian
>>>> > > > > > > > > > > > >
>>>> > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
>>>> dyioulos@onpointfc.com>
>>>> > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > Hi, Sebastian.
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > I just copied what appeared in the OM
>>>> instance on
>>>> > > > > > > > > > > > > > my desktop
>>>> > > > > > > > >
>>>> > > > > > > > > when I
>>>> > > > > > > > >
>>>> > > > > > > > > > > > tried
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > > > to
>>>> > > > > > > > > > > > > > upload the avi. Error.log in the OM log
>>>> directory
>>>> > > > > > > > > > > > > > is empty.
>>>> > > > > > > > >
>>>> > > > > > > > > Would
>>>> > > > > > > > >
>>>> > > > > > > > > > > > > > I find the
>>>> > > > > > > > > > > > > > output in red5.log or openmeetings.log? What
>>>> would
>>>> > > > > > > > > > > > > > I
>>>> > > > >
>>>> > > > > grep
>>>> > > > >
>>>> > > > > > > on?
>>>> > > > > > >
>>>> > > > > > > > > > > > > > Thanks.
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > Dimitri
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
>>>> > > > > > >
>>>> > > > > > > seba.wagner@gmail.comwrote:
>>>> > > > > > > > > > > > > > > I don' think you've copied the whole error
>>>> log.
>>>> > > > > > > > > > > > > > > The conversation log error is much longer.
>>>> You
>>>> > > > > > > > > > > > > > > just copied the final
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > lines
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > that convert a screenshot for the preview
>>>> of the
>>>> > > > > > > > > > > > > > > video. The actual error already happened
>>>> before
>>>> > >
>>>> > > when
>>>> > >
>>>> > > > > > > > > > > > > > > the video was converted to
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > a
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > FLV, the FLV is either broken or was never
>>>> > > > > > > > > > > > > > > successfully created from the given file.
>>>> > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > Sebastian
>>>> > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
>>>> dyioulos@onpointfc.com>
>>>> > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > Good morning (or afternoon, as the case
>>>> may
>>>> > > > > > > > > > > > > > > > be), all.
>>>> > > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > Just a brief aside: after setting up OM
>>>> 2.0,
>>>> > > > > > > > > > > > > > > > with the
>>>> > > > > > >
>>>> > > > > > > help
>>>> > > > > > >
>>>> > > > > > > > > > > > > > > > of
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > Maxim,
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > Alexei, and
>>>> > > > > > > > > > > > > > > > others, I completely blew up the VM it was
>>>> > > > > > > > > > > > > > > > loaded on. It was my non-OM mistake
>>>> > > > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable
>>>> > > > > > > > > > > > > > > > (hadn't
>>>> > > > >
>>>> > > > > backed
>>>> > > > >
>>>> > > > > > > up
>>>> > > > > > >
>>>> > > > > > > > > the
>>>> > > > > > > > >
>>>> > > > > > > > > > > > > > > > VM, either. Arrgh.). So I created a new
>>>> VM,
>>>> > > > > > > > > > > > > > > > and
>>>> > > > >
>>>> > > > > added
>>>> > > > >
>>>> > > > > > > > > > > > > > > > OM
>>>> > > > > > > > >
>>>> > > > > > > > > 2.0.
>>>> > > > > > > > >
>>>> > > > > > > > > > > > > > > > It was your kind and spot-on answers to my
>>>> > >
>>>> > > previous
>>>> > >
>>>> > > > > > > > > > > > > > > > questions that allowed me to
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > get
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > my install working properly. Again, my
>>>> > > > > > > > > > > > > > > > heartfelt thanks.
>>>> > > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > Now, to a new question. I've tried to
>>>> upload
>>>> > > > > > > > > > > > > > > > and stream
>>>> > > > > > >
>>>> > > > > > > a
>>>> > > > > > >
>>>> > > > > > > > > > > > > > > > small
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > test
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > avi. But,
>>>> > > > > > > > > > > > > > > > the upload fails, with this output:
>>>> > > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > Name: out
>>>> > > > > > > > > > > > > > > > Value:
>>>> > > > > > > > > > > > > > > > Name: exitValue
>>>> > > > > > > > > > > > > > > > Value: 1
>>>> > > > > > > > > > > > > > > > Name: command
>>>> > > > > > > > > > > > > > > > Value:
>>>> > > > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>>>> > > > >
>>>> > > > >
>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>> > > > >
>>>> > > > > > > > >FL
>>>> > > > > > > > >
>>>> > > > > > > > > > > >V_
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > >5.flv, -vcodec,
>>>> > > > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
>>>> > > > > > > > > > > > > > > > 256x240,
>>>> > > > >
>>>> > > > >
>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>> > > > >
>>>> > > > > > > > >FL
>>>> > > > > > > > >
>>>> > > > > > > > > > > >V_
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > >5.jpg] Name: error
>>>> > > > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402,
>>>> Copyright (c)
>>>> > > > > > > > > > > > > > > > 2000-2011 the
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > FFmpeg
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > developers
>>>> > > > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc
>>>> 4.4.6
>>>> > > > >
>>>> > > > > 20120305
>>>> > > > >
>>>> > > > > > > > > > > > > > > > (Red Hat
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > 4.4.6-4)
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > configuration: --enable-libmp3lame
>>>> > > > > > > > > > > > > > > > --enable-postproc --enable-gpl
>>>> > > > > > > > > > > > > > > > --enable-pthreads --enable-avfilter
>>>> > > > > > > > >
>>>> > > > > > > > > --prefix=/usr
>>>> > > > > > > > >
>>>> > > > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>>>> > > > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>>>> > > > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>>>> > > > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>>>> > > > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>>>> > > > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>>>> > > > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>>>> > > > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>>>> > > > >
>>>> > > > >
>>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>>> > > > >
>>>> > > > > > > > >FL
>>>> > > > > > > > >
>>>> > > > > > > > > > > >V_
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > >5.flv: Invalid data found when processing
>>>> input
>>>> > > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > Name: process
>>>> > > > > > > > > > > > > > > > Value: previewUpload ID :: 5
>>>> > > > > > > > > > > > > > > > Name: exitValue
>>>> > > > > > > > > > > > > > > > Value: 0
>>>> > > > > > > > > > > > > > > > Name: command
>>>> > > > > > > > > > > > > > > > Value:
>>>> > > > > > > > > > > > > > > > Name: completeName
>>>> > > > > > > > > > > > > > > > Value:
>>>> > > > >
>>>> > > > >
>>>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
>>>> > > > >
>>>> > > > > > > > >21
>>>> > > > > > > > >
>>>> > > > > > > > > > > >36
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
>>>> > > > > > > > > > > > > > > > Value:
>>>> > > > > > > > > > > > > > > > Name: fileExplorerItemId
>>>> > > > > > > > > > > > > > > > Value: 5
>>>> > > > > > > > > > > > > > > > Name: process
>>>> > > > > > > > > > > > > > > > Value:
>>>> > > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > I'm unable to interpret this output. Your
>>>> > > > > > > > > > > > > > > > assistance in solving would
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > be
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > appreciated, as ever.
>>>> > > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > Dimitri
>>>> > > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > > --
>>>> > > > > > > > > > > > > > > > This message has been scanned for viruses
>>>> and
>>>> > > > > > > > > > > > > > > > dangerous content by MailScanner, and is
>>>> > > > > > > > > > > > > > > > believed to be clean.
>>>> > > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > > --
>>>> > > > > > > > > > > > > > > Sebastian Wagner
>>>> > > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>>>> > > > > > > > > > > > > > > http://www.webbase-design.de
>>>> > > > > > > > > > > > > > > http://www.wagner-sebastian.com
>>>> > > > > > > > > > > > > > > seba.wagner@gmail.com
>>>> > > > > > > > > > > > > >
>>>> > > > > > > > > > > > > > --
>>>> > > > > > > > > > > > > > This message has been scanned for viruses and
>>>> > > > > > > > > > > > > > dangerous content by MailScanner, and is
>>>> > > > > > > > > > > > > > believed to be clean.
>>>> > > > > > > > > > > > >
>>>> > > > > > > > > > > > > --
>>>> > > > > > > > > > > > > Sebastian Wagner
>>>> > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>>>> > > > > > > > > > > > > http://www.webbase-design.de
>>>> > > > > > > > > > > > > http://www.wagner-sebastian.com
>>>> > > > > > > > > > > > > seba.wagner@gmail.com
>>>> > > > > > > > > > > >
>>>> > > > > > > > > > > > --
>>>> > > > > > > > > > > > This message has been scanned for viruses and
>>>> > > > > > > > > > > > dangerous content by MailScanner, and is
>>>> > > > > > > > > > > > believed to be clean.
>>>> > > > > > > > > > >
>>>> > > > > > > > > > > --
>>>> > > > > > > > > > > Sebastian Wagner
>>>> > > > > > > > > > > https://twitter.com/#!/dead_lock
>>>> > > > > > > > > > > http://www.webbase-design.de
>>>> > > > > > > > > > > http://www.wagner-sebastian.com
>>>> > > > > > > > > > > seba.wagner@gmail.com
>>>> > > > > > > > >
>>>> > > > > > > > > --
>>>> > > > > > > > > This message has been scanned for viruses and
>>>> > > > > > > > > dangerous content by MailScanner, and is
>>>> > > > > > > > > believed to be clean.
>>>> > > > > > > >
>>>> > > > > > > > --
>>>> > > > > > > > Sebastian Wagner
>>>> > > > > > > > https://twitter.com/#!/dead_lock
>>>> > > > > > > > http://www.webbase-design.de
>>>> > > > > > > > http://www.wagner-sebastian.com
>>>> > > > > > > > seba.wagner@gmail.com
>>>> > > > > > >
>>>> > > > > > > --
>>>> > > > > > > This message has been scanned for viruses and
>>>> > > > > > > dangerous content by MailScanner, and is
>>>> > > > > > > believed to be clean.
>>>> > > > > >
>>>> > > > > > --
>>>> > > > > > WBR
>>>> > > > > > Maxim aka solomax
>>>> > > > >
>>>> > > > > --
>>>> > > > > This message has been scanned for viruses and
>>>> > > > > dangerous content by MailScanner, and is
>>>> > > > > believed to be clean.
>>>> > > >
>>>> > > > --
>>>> > > > WBR
>>>> > > > Maxim aka solomax
>>>> > >
>>>> > > --
>>>> > > This message has been scanned for viruses and
>>>> > > dangerous content by MailScanner, and is
>>>> > > believed to be clean.
>>>> >
>>>> > --
>>>> > Sebastian Wagner
>>>> > https://twitter.com/#!/dead_lock
>>>> > http://www.webbase-design.de
>>>> > http://www.wagner-sebastian.com
>>>> > seba.wagner@gmail.com
>>>>
>>>>
>>>>
>>>> --
>>>> This message has been scanned for viruses and
>>>> dangerous content by MailScanner, and is
>>>> believed to be clean.
>>>>
>>>>
>>>
>>>
>>> --
>>> Sebastian Wagner
>>> https://twitter.com/#!/dead_lock
>>> http://www.webbase-design.de
>>> http://www.wagner-sebastian.com
>>> seba.wagner@gmail.com
>>>
>>
>>
>
Re: Streaming video
Posted by RM P <by...@gmail.com>.
HI Sebastian,
can you please guide on to make video stream - pause and seek functional. I
believe the code is in place and looking for few pointers which will help.
Appreciate your response.
thanks
Manohar
On Tue, Nov 6, 2012 at 4:57 PM, RM P <by...@gmail.com> wrote:
> Hi Sebastian,
>
> can you please provide on which files need to be changed to incorporate
> additional controls like pause, seek etc.
>
> appreciate your reply.
>
> thanks,
> Manohar
>
> On Thu, Aug 9, 2012 at 8:14 PM, seba.wagner@gmail.com <
> seba.wagner@gmail.com> wrote:
>
>> Well then possibly the pause is not implemented either.
>> You can only stop and play the videos then "synchronized" between you and
>> the other conference participants.
>>
>>
>> Sebastian
>>
>> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>
>>> Sebastian,
>>>
>>> Clicking on the video didn't work, but that could just be me.
>>>
>>> Dimitri
>>>
>>>
>>> On Thursday 09 August 2012 10:37:15 am seba.wagner@gmail.com wrote:
>>> > I think you can pause if you simply click on the video.
>>> > Seek is not implemented however.
>>> >
>>> > Sebastian
>>> >
>>> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>> >
>>> > > Maxim,
>>> > >
>>> > > Sorry I made you go through that, when a little digging on my part
>>> would
>>> > > have
>>> > > solved the problem. But, a related question:
>>> > >
>>> > > there's currently no ability to pause a video (or, at least none
>>> that I
>>> > > can see). From a development standpoint, is that doable and, if so,
>>> > > might that be
>>> > > added as a feature request?
>>> > >
>>> > > Dimitri
>>> > >
>>> > > On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
>>> > > > OK
>>> > > >
>>> > > > the longer steps :)
>>> > > > 1) file upload
>>> > > > 2) select file
>>> > > > 3) upload file
>>> > > > 4) wait until file is uploaded and appear under private or public
>>> files
>>> > > > 5) drag file from private or public files and drop it to the
>>> whiteboard
>>> > > >
>>> > > > just tested it on 2.1 works for me
>>> > > >
>>> > > > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <
>>> dyioulos@onpointfc.com
>>> > > >
>>> > > >wrote:
>>> > > > > Maxim,
>>> > > > >
>>> > > > > In the OM files tab, the only option is "File upload". If I use
>>> > > > > that,
>>> > >
>>> > > do
>>> > >
>>> > > > > a "select file", find my file, then drag-and-drop to whiteboard,
>>> it
>>> > > > > doesn't work.
>>> > > > >
>>> > > > > Dimitri
>>> > > > >
>>> > > > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
>>> > > > > > Open Files tab
>>> > > > > > drag your video to the whiteboard
>>> > > > > >
>>> > > > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
>>> > >
>>> > > dyioulos@onpointfc.com
>>> > >
>>> > > > > >wrote:
>>> > > > > > > "You might have to goto the file explorer and load it from
>>> there
>>> > > > > > > to the whiteboard."
>>> > > > > > >
>>> > > > > > > Er, how do I do that?
>>> > > > > > >
>>> > > > > > > Dimitri
>>> > > > > > >
>>> > > > > > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.comwrote:
>>> > > > > > > > * it never appears in the whiteboard.*
>>> > > > > > > > => but it is in the file explorer itself? Maybe just the
>>> > > > > > > > checkbox on the bottom of the upload window is not working
>>> > > > > > > > correctly for video files. You might have to goto the file
>>> > > > > > > > explorer and load it from
>>> > > > >
>>> > > > > there
>>> > > > >
>>> > > > > > > > to the whiteboard.
>>> > > > > > > >
>>> > > > > > > > Sebastian
>>> > > > > > > >
>>> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>> > > > > > > >
>>> > > > > > > > > Spoke too soon (will I never learn). When I try to
>>> upload my
>>> > >
>>> > > avi
>>> > >
>>> > > > > > > > > (and, it does
>>> > > > > > > > > play in VLC), the UI dialog box shows that it's uploaded
>>> and
>>> > > > > > > > > converted. However, it never appears in the whiteboard.
>>> And,
>>> > > > > > > > > there are no errors.
>>> > > > > > > > >
>>> > > > > > > > > Ideas?
>>> > > > > > > > >
>>> > > > > > > > > Dimitri
>>> > > > > > > > >
>>> > > > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos
>>> wrote:
>>> > > > > > > > > > Sebastian,
>>> > > > > > > > > >
>>> > > > > > > > > > Well, I'm embarrassed. The avi I tired did not, in
>>> fact,
>>> > >
>>> > > work
>>> > >
>>> > > > > with
>>> > > > >
>>> > > > > > > > > > VLC.
>>> > > > > > > > >
>>> > > > > > > > > I
>>> > > > > > > > >
>>> > > > > > > > > > found another test avi, and it uploaded in OM just
>>> fine.
>>> > > > > > > > > >
>>> > > > > > > > > > Apologies for the noise.
>>> > > > > > > > > >
>>> > > > > > > > > > Dimitri
>>> > > > > > > > > >
>>> > > > > > > > > > On Thursday 09 August 2012 9:00:16 am
>>> > >
>>> > > seba.wagner@gmail.comwrote:
>>> > > > > > > > > > > Does the file:
>>> > > > > > > > > > > /usr/local/openmeetings/
>>> > > > > > > > > > >
>>> webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
>>> > > > > > > > > > > exist?
>>> > > > > > > > > > > Can you download and watch it using VLC-Player or any
>>> > > > > > > > > > > other
>>> > > > >
>>> > > > > Video
>>> > > > >
>>> > > > > > > > > player?
>>> > > > > > > > >
>>> > > > > > > > > > > Sebastian
>>> > > > > > > > > > >
>>> > > > > > > > > > >
>>> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>>> > > > > > > > > > >
>>> > > > > > > > > > > > Sebastian,
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > This is all the output from the UI:
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > Name: out
>>> > > > > > > > > > > > Value:
>>> > > > > > > > > > > > Name: exitValue
>>> > > > > > > > > > > > Value: 1
>>> > > > > > > > > > > > Name: command
>>> > > > > > > > > > > > Value:
>>> > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>>> > > > >
>>> > > > >
>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>> > > > >
>>> > > > > > > > >FL
>>> > > > > > > > >
>>> > > > > > > > > > > >V_ 6.flv, -vcodec,
>>> > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
>>> > > > > > > > > > > > 256x240,
>>> > > > >
>>> > > > >
>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>> > > > >
>>> > > > > > > > >FL
>>> > > > > > > > >
>>> > > > > > > > > > > >V_ 6.jpg] Name: error
>>> > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
>>> > > > > > > > > > > > 2000-2011 the FFmpeg developers
>>> > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
>>> 20120305
>>> > > > > > > > > > > > (Red Hat 4.4.6-4)
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > configuration: --enable-libmp3lame
>>> --enable-postproc
>>> > > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
>>> > > > >
>>> > > > > --prefix=/usr
>>> > > > >
>>> > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>>> > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>>> > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>>> > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>>> > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>>> > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>>> > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>>> > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>>> > > > >
>>> > > > >
>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>> > > > >
>>> > > > > > > > >FL
>>> > > > > > > > >
>>> > > > > > > > > > > >V_ 6.flv: Invalid data found when processing input
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > Name: process
>>> > > > > > > > > > > > Value: previewUpload ID :: 6
>>> > > > > > > > > > > > Name: exitValue
>>> > > > > > > > > > > > Value: 0
>>> > > > > > > > > > > > Name: command
>>> > > > > > > > > > > > Value:
>>> > > > > > > > > > > > Name: completeName
>>> > > > > > > > > > > > Value:
>>> > > > >
>>> > > > >
>>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
>>> > > > >
>>> > > > > > > > >5a
>>> > > > > > > > >
>>> > > > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
>>> > > > > > > > > > > > Value:
>>> > > > > > > > > > > > Name: fileExplorerItemId
>>> > > > > > > > > > > > Value: 6
>>> > > > > > > > > > > > Name: process
>>> > > > > > > > > > > > Value:
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > Dimitri
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
>>> > > > >
>>> > > > > seba.wagner@gmail.comwrote:
>>> > > > > > > > > > > > > *I just copied what appeared in the OM instance*
>>> > > > > > > > > > > > > => I donn't think so. Did you scroll or do
>>> "ctrl-a"
>>> > > > > > > > > > > > > before you
>>> > > > > > > > >
>>> > > > > > > > > copied
>>> > > > > > > > >
>>> > > > > > > > > > > > > the content?
>>> > > > > > > > > > > > >
>>> > > > > > > > > > > > > The error message in the UI should be
>>> sufficient. No
>>> > >
>>> > > need
>>> > >
>>> > > > > to
>>> > > > >
>>> > > > > > > > > > > > > search for anything in the logs at this point.
>>> > > > > > > > > > > > >
>>> > > > > > > > > > > > > Sebastian
>>> > > > > > > > > > > > >
>>> > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dyioulos@onpointfc.com
>>> >
>>> > > > > > > > > > > > >
>>> > > > > > > > > > > > > > Hi, Sebastian.
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > I just copied what appeared in the OM instance
>>> on
>>> > > > > > > > > > > > > > my desktop
>>> > > > > > > > >
>>> > > > > > > > > when I
>>> > > > > > > > >
>>> > > > > > > > > > > > tried
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > > > to
>>> > > > > > > > > > > > > > upload the avi. Error.log in the OM log
>>> directory
>>> > > > > > > > > > > > > > is empty.
>>> > > > > > > > >
>>> > > > > > > > > Would
>>> > > > > > > > >
>>> > > > > > > > > > > > > > I find the
>>> > > > > > > > > > > > > > output in red5.log or openmeetings.log? What
>>> would
>>> > > > > > > > > > > > > > I
>>> > > > >
>>> > > > > grep
>>> > > > >
>>> > > > > > > on?
>>> > > > > > >
>>> > > > > > > > > > > > > > Thanks.
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > Dimitri
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
>>> > > > > > >
>>> > > > > > > seba.wagner@gmail.comwrote:
>>> > > > > > > > > > > > > > > I don' think you've copied the whole error
>>> log.
>>> > > > > > > > > > > > > > > The conversation log error is much longer.
>>> You
>>> > > > > > > > > > > > > > > just copied the final
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > lines
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > that convert a screenshot for the preview of
>>> the
>>> > > > > > > > > > > > > > > video. The actual error already happened
>>> before
>>> > >
>>> > > when
>>> > >
>>> > > > > > > > > > > > > > > the video was converted to
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > a
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > FLV, the FLV is either broken or was never
>>> > > > > > > > > > > > > > > successfully created from the given file.
>>> > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > Sebastian
>>> > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
>>> dyioulos@onpointfc.com>
>>> > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > Good morning (or afternoon, as the case may
>>> > > > > > > > > > > > > > > > be), all.
>>> > > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > Just a brief aside: after setting up OM
>>> 2.0,
>>> > > > > > > > > > > > > > > > with the
>>> > > > > > >
>>> > > > > > > help
>>> > > > > > >
>>> > > > > > > > > > > > > > > > of
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > Maxim,
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > Alexei, and
>>> > > > > > > > > > > > > > > > others, I completely blew up the VM it was
>>> > > > > > > > > > > > > > > > loaded on. It was my non-OM mistake
>>> > > > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable
>>> > > > > > > > > > > > > > > > (hadn't
>>> > > > >
>>> > > > > backed
>>> > > > >
>>> > > > > > > up
>>> > > > > > >
>>> > > > > > > > > the
>>> > > > > > > > >
>>> > > > > > > > > > > > > > > > VM, either. Arrgh.). So I created a new
>>> VM,
>>> > > > > > > > > > > > > > > > and
>>> > > > >
>>> > > > > added
>>> > > > >
>>> > > > > > > > > > > > > > > > OM
>>> > > > > > > > >
>>> > > > > > > > > 2.0.
>>> > > > > > > > >
>>> > > > > > > > > > > > > > > > It was your kind and spot-on answers to my
>>> > >
>>> > > previous
>>> > >
>>> > > > > > > > > > > > > > > > questions that allowed me to
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > get
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > my install working properly. Again, my
>>> > > > > > > > > > > > > > > > heartfelt thanks.
>>> > > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > Now, to a new question. I've tried to
>>> upload
>>> > > > > > > > > > > > > > > > and stream
>>> > > > > > >
>>> > > > > > > a
>>> > > > > > >
>>> > > > > > > > > > > > > > > > small
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > test
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > avi. But,
>>> > > > > > > > > > > > > > > > the upload fails, with this output:
>>> > > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > Name: out
>>> > > > > > > > > > > > > > > > Value:
>>> > > > > > > > > > > > > > > > Name: exitValue
>>> > > > > > > > > > > > > > > > Value: 1
>>> > > > > > > > > > > > > > > > Name: command
>>> > > > > > > > > > > > > > > > Value:
>>> > > > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>>> > > > >
>>> > > > >
>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>> > > > >
>>> > > > > > > > >FL
>>> > > > > > > > >
>>> > > > > > > > > > > >V_
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > > > > >5.flv, -vcodec,
>>> > > > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
>>> > > > > > > > > > > > > > > > 256x240,
>>> > > > >
>>> > > > >
>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>> > > > >
>>> > > > > > > > >FL
>>> > > > > > > > >
>>> > > > > > > > > > > >V_
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > > > > >5.jpg] Name: error
>>> > > > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402,
>>> Copyright (c)
>>> > > > > > > > > > > > > > > > 2000-2011 the
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > FFmpeg
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > developers
>>> > > > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc
>>> 4.4.6
>>> > > > >
>>> > > > > 20120305
>>> > > > >
>>> > > > > > > > > > > > > > > > (Red Hat
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > 4.4.6-4)
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > configuration: --enable-libmp3lame
>>> > > > > > > > > > > > > > > > --enable-postproc --enable-gpl
>>> > > > > > > > > > > > > > > > --enable-pthreads --enable-avfilter
>>> > > > > > > > >
>>> > > > > > > > > --prefix=/usr
>>> > > > > > > > >
>>> > > > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>>> > > > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>>> > > > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>>> > > > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>>> > > > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>>> > > > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>>> > > > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>>> > > > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>>> > > > >
>>> > > > >
>>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>>> > > > >
>>> > > > > > > > >FL
>>> > > > > > > > >
>>> > > > > > > > > > > >V_
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > > > > >5.flv: Invalid data found when processing
>>> input
>>> > > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > Name: process
>>> > > > > > > > > > > > > > > > Value: previewUpload ID :: 5
>>> > > > > > > > > > > > > > > > Name: exitValue
>>> > > > > > > > > > > > > > > > Value: 0
>>> > > > > > > > > > > > > > > > Name: command
>>> > > > > > > > > > > > > > > > Value:
>>> > > > > > > > > > > > > > > > Name: completeName
>>> > > > > > > > > > > > > > > > Value:
>>> > > > >
>>> > > > >
>>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
>>> > > > >
>>> > > > > > > > >21
>>> > > > > > > > >
>>> > > > > > > > > > > >36
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
>>> > > > > > > > > > > > > > > > Value:
>>> > > > > > > > > > > > > > > > Name: fileExplorerItemId
>>> > > > > > > > > > > > > > > > Value: 5
>>> > > > > > > > > > > > > > > > Name: process
>>> > > > > > > > > > > > > > > > Value:
>>> > > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > I'm unable to interpret this output. Your
>>> > > > > > > > > > > > > > > > assistance in solving would
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > be
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > appreciated, as ever.
>>> > > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > Dimitri
>>> > > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > > --
>>> > > > > > > > > > > > > > > > This message has been scanned for viruses
>>> and
>>> > > > > > > > > > > > > > > > dangerous content by MailScanner, and is
>>> > > > > > > > > > > > > > > > believed to be clean.
>>> > > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > > --
>>> > > > > > > > > > > > > > > Sebastian Wagner
>>> > > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>>> > > > > > > > > > > > > > > http://www.webbase-design.de
>>> > > > > > > > > > > > > > > http://www.wagner-sebastian.com
>>> > > > > > > > > > > > > > > seba.wagner@gmail.com
>>> > > > > > > > > > > > > >
>>> > > > > > > > > > > > > > --
>>> > > > > > > > > > > > > > This message has been scanned for viruses and
>>> > > > > > > > > > > > > > dangerous content by MailScanner, and is
>>> > > > > > > > > > > > > > believed to be clean.
>>> > > > > > > > > > > > >
>>> > > > > > > > > > > > > --
>>> > > > > > > > > > > > > Sebastian Wagner
>>> > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>>> > > > > > > > > > > > > http://www.webbase-design.de
>>> > > > > > > > > > > > > http://www.wagner-sebastian.com
>>> > > > > > > > > > > > > seba.wagner@gmail.com
>>> > > > > > > > > > > >
>>> > > > > > > > > > > > --
>>> > > > > > > > > > > > This message has been scanned for viruses and
>>> > > > > > > > > > > > dangerous content by MailScanner, and is
>>> > > > > > > > > > > > believed to be clean.
>>> > > > > > > > > > >
>>> > > > > > > > > > > --
>>> > > > > > > > > > > Sebastian Wagner
>>> > > > > > > > > > > https://twitter.com/#!/dead_lock
>>> > > > > > > > > > > http://www.webbase-design.de
>>> > > > > > > > > > > http://www.wagner-sebastian.com
>>> > > > > > > > > > > seba.wagner@gmail.com
>>> > > > > > > > >
>>> > > > > > > > > --
>>> > > > > > > > > This message has been scanned for viruses and
>>> > > > > > > > > dangerous content by MailScanner, and is
>>> > > > > > > > > believed to be clean.
>>> > > > > > > >
>>> > > > > > > > --
>>> > > > > > > > Sebastian Wagner
>>> > > > > > > > https://twitter.com/#!/dead_lock
>>> > > > > > > > http://www.webbase-design.de
>>> > > > > > > > http://www.wagner-sebastian.com
>>> > > > > > > > seba.wagner@gmail.com
>>> > > > > > >
>>> > > > > > > --
>>> > > > > > > This message has been scanned for viruses and
>>> > > > > > > dangerous content by MailScanner, and is
>>> > > > > > > believed to be clean.
>>> > > > > >
>>> > > > > > --
>>> > > > > > WBR
>>> > > > > > Maxim aka solomax
>>> > > > >
>>> > > > > --
>>> > > > > This message has been scanned for viruses and
>>> > > > > dangerous content by MailScanner, and is
>>> > > > > believed to be clean.
>>> > > >
>>> > > > --
>>> > > > WBR
>>> > > > Maxim aka solomax
>>> > >
>>> > > --
>>> > > This message has been scanned for viruses and
>>> > > dangerous content by MailScanner, and is
>>> > > believed to be clean.
>>> >
>>> > --
>>> > Sebastian Wagner
>>> > https://twitter.com/#!/dead_lock
>>> > http://www.webbase-design.de
>>> > http://www.wagner-sebastian.com
>>> > seba.wagner@gmail.com
>>>
>>>
>>>
>>> --
>>> This message has been scanned for viruses and
>>> dangerous content by MailScanner, and is
>>> believed to be clean.
>>>
>>>
>>
>>
>> --
>> Sebastian Wagner
>> https://twitter.com/#!/dead_lock
>> http://www.webbase-design.de
>> http://www.wagner-sebastian.com
>> seba.wagner@gmail.com
>>
>
>
Re: Streaming video
Posted by RM P <by...@gmail.com>.
Hi Sebastian,
can you please provide on which files need to be changed to incorporate
additional controls like pause, seek etc.
appreciate your reply.
thanks,
Manohar
On Thu, Aug 9, 2012 at 8:14 PM, seba.wagner@gmail.com <seba.wagner@gmail.com
> wrote:
> Well then possibly the pause is not implemented either.
> You can only stop and play the videos then "synchronized" between you and
> the other conference participants.
>
>
> Sebastian
>
> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>
>> Sebastian,
>>
>> Clicking on the video didn't work, but that could just be me.
>>
>> Dimitri
>>
>>
>> On Thursday 09 August 2012 10:37:15 am seba.wagner@gmail.com wrote:
>> > I think you can pause if you simply click on the video.
>> > Seek is not implemented however.
>> >
>> > Sebastian
>> >
>> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>> >
>> > > Maxim,
>> > >
>> > > Sorry I made you go through that, when a little digging on my part
>> would
>> > > have
>> > > solved the problem. But, a related question:
>> > >
>> > > there's currently no ability to pause a video (or, at least none that
>> I
>> > > can see). From a development standpoint, is that doable and, if so,
>> > > might that be
>> > > added as a feature request?
>> > >
>> > > Dimitri
>> > >
>> > > On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
>> > > > OK
>> > > >
>> > > > the longer steps :)
>> > > > 1) file upload
>> > > > 2) select file
>> > > > 3) upload file
>> > > > 4) wait until file is uploaded and appear under private or public
>> files
>> > > > 5) drag file from private or public files and drop it to the
>> whiteboard
>> > > >
>> > > > just tested it on 2.1 works for me
>> > > >
>> > > > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <
>> dyioulos@onpointfc.com
>> > > >
>> > > >wrote:
>> > > > > Maxim,
>> > > > >
>> > > > > In the OM files tab, the only option is "File upload". If I use
>> > > > > that,
>> > >
>> > > do
>> > >
>> > > > > a "select file", find my file, then drag-and-drop to whiteboard,
>> it
>> > > > > doesn't work.
>> > > > >
>> > > > > Dimitri
>> > > > >
>> > > > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
>> > > > > > Open Files tab
>> > > > > > drag your video to the whiteboard
>> > > > > >
>> > > > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
>> > >
>> > > dyioulos@onpointfc.com
>> > >
>> > > > > >wrote:
>> > > > > > > "You might have to goto the file explorer and load it from
>> there
>> > > > > > > to the whiteboard."
>> > > > > > >
>> > > > > > > Er, how do I do that?
>> > > > > > >
>> > > > > > > Dimitri
>> > > > > > >
>> > > > > > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.comwrote:
>> > > > > > > > * it never appears in the whiteboard.*
>> > > > > > > > => but it is in the file explorer itself? Maybe just the
>> > > > > > > > checkbox on the bottom of the upload window is not working
>> > > > > > > > correctly for video files. You might have to goto the file
>> > > > > > > > explorer and load it from
>> > > > >
>> > > > > there
>> > > > >
>> > > > > > > > to the whiteboard.
>> > > > > > > >
>> > > > > > > > Sebastian
>> > > > > > > >
>> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>> > > > > > > >
>> > > > > > > > > Spoke too soon (will I never learn). When I try to
>> upload my
>> > >
>> > > avi
>> > >
>> > > > > > > > > (and, it does
>> > > > > > > > > play in VLC), the UI dialog box shows that it's uploaded
>> and
>> > > > > > > > > converted. However, it never appears in the whiteboard.
>> And,
>> > > > > > > > > there are no errors.
>> > > > > > > > >
>> > > > > > > > > Ideas?
>> > > > > > > > >
>> > > > > > > > > Dimitri
>> > > > > > > > >
>> > > > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos
>> wrote:
>> > > > > > > > > > Sebastian,
>> > > > > > > > > >
>> > > > > > > > > > Well, I'm embarrassed. The avi I tired did not, in
>> fact,
>> > >
>> > > work
>> > >
>> > > > > with
>> > > > >
>> > > > > > > > > > VLC.
>> > > > > > > > >
>> > > > > > > > > I
>> > > > > > > > >
>> > > > > > > > > > found another test avi, and it uploaded in OM just fine.
>> > > > > > > > > >
>> > > > > > > > > > Apologies for the noise.
>> > > > > > > > > >
>> > > > > > > > > > Dimitri
>> > > > > > > > > >
>> > > > > > > > > > On Thursday 09 August 2012 9:00:16 am
>> > >
>> > > seba.wagner@gmail.comwrote:
>> > > > > > > > > > > Does the file:
>> > > > > > > > > > > /usr/local/openmeetings/
>> > > > > > > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
>> > > > > > > > > > > exist?
>> > > > > > > > > > > Can you download and watch it using VLC-Player or any
>> > > > > > > > > > > other
>> > > > >
>> > > > > Video
>> > > > >
>> > > > > > > > > player?
>> > > > > > > > >
>> > > > > > > > > > > Sebastian
>> > > > > > > > > > >
>> > > > > > > > > > >
>> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>> > > > > > > > > > >
>> > > > > > > > > > > > Sebastian,
>> > > > > > > > > > > >
>> > > > > > > > > > > > This is all the output from the UI:
>> > > > > > > > > > > >
>> > > > > > > > > > > > Name: out
>> > > > > > > > > > > > Value:
>> > > > > > > > > > > > Name: exitValue
>> > > > > > > > > > > > Value: 1
>> > > > > > > > > > > > Name: command
>> > > > > > > > > > > > Value:
>> > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>> > > > >
>> > > > >
>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>> > > > >
>> > > > > > > > >FL
>> > > > > > > > >
>> > > > > > > > > > > >V_ 6.flv, -vcodec,
>> > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
>> > > > > > > > > > > > 256x240,
>> > > > >
>> > > > >
>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>> > > > >
>> > > > > > > > >FL
>> > > > > > > > >
>> > > > > > > > > > > >V_ 6.jpg] Name: error
>> > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
>> > > > > > > > > > > > 2000-2011 the FFmpeg developers
>> > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
>> 20120305
>> > > > > > > > > > > > (Red Hat 4.4.6-4)
>> > > > > > > > > > > >
>> > > > > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
>> > > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
>> > > > >
>> > > > > --prefix=/usr
>> > > > >
>> > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>> > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>> > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>> > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>> > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>> > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>> > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>> > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>> > > > >
>> > > > >
>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>> > > > >
>> > > > > > > > >FL
>> > > > > > > > >
>> > > > > > > > > > > >V_ 6.flv: Invalid data found when processing input
>> > > > > > > > > > > >
>> > > > > > > > > > > > Name: process
>> > > > > > > > > > > > Value: previewUpload ID :: 6
>> > > > > > > > > > > > Name: exitValue
>> > > > > > > > > > > > Value: 0
>> > > > > > > > > > > > Name: command
>> > > > > > > > > > > > Value:
>> > > > > > > > > > > > Name: completeName
>> > > > > > > > > > > > Value:
>> > > > >
>> > > > >
>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
>> > > > >
>> > > > > > > > >5a
>> > > > > > > > >
>> > > > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
>> > > > > > > > > > > > Value:
>> > > > > > > > > > > > Name: fileExplorerItemId
>> > > > > > > > > > > > Value: 6
>> > > > > > > > > > > > Name: process
>> > > > > > > > > > > > Value:
>> > > > > > > > > > > >
>> > > > > > > > > > > > Dimitri
>> > > > > > > > > > > >
>> > > > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
>> > > > >
>> > > > > seba.wagner@gmail.comwrote:
>> > > > > > > > > > > > > *I just copied what appeared in the OM instance*
>> > > > > > > > > > > > > => I donn't think so. Did you scroll or do
>> "ctrl-a"
>> > > > > > > > > > > > > before you
>> > > > > > > > >
>> > > > > > > > > copied
>> > > > > > > > >
>> > > > > > > > > > > > > the content?
>> > > > > > > > > > > > >
>> > > > > > > > > > > > > The error message in the UI should be sufficient.
>> No
>> > >
>> > > need
>> > >
>> > > > > to
>> > > > >
>> > > > > > > > > > > > > search for anything in the logs at this point.
>> > > > > > > > > > > > >
>> > > > > > > > > > > > > Sebastian
>> > > > > > > > > > > > >
>> > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>> > > > > > > > > > > > >
>> > > > > > > > > > > > > > Hi, Sebastian.
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > I just copied what appeared in the OM instance
>> on
>> > > > > > > > > > > > > > my desktop
>> > > > > > > > >
>> > > > > > > > > when I
>> > > > > > > > >
>> > > > > > > > > > > > tried
>> > > > > > > > > > > >
>> > > > > > > > > > > > > > to
>> > > > > > > > > > > > > > upload the avi. Error.log in the OM log
>> directory
>> > > > > > > > > > > > > > is empty.
>> > > > > > > > >
>> > > > > > > > > Would
>> > > > > > > > >
>> > > > > > > > > > > > > > I find the
>> > > > > > > > > > > > > > output in red5.log or openmeetings.log? What
>> would
>> > > > > > > > > > > > > > I
>> > > > >
>> > > > > grep
>> > > > >
>> > > > > > > on?
>> > > > > > >
>> > > > > > > > > > > > > > Thanks.
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > Dimitri
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
>> > > > > > >
>> > > > > > > seba.wagner@gmail.comwrote:
>> > > > > > > > > > > > > > > I don' think you've copied the whole error
>> log.
>> > > > > > > > > > > > > > > The conversation log error is much longer. You
>> > > > > > > > > > > > > > > just copied the final
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > lines
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > that convert a screenshot for the preview of
>> the
>> > > > > > > > > > > > > > > video. The actual error already happened
>> before
>> > >
>> > > when
>> > >
>> > > > > > > > > > > > > > > the video was converted to
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > a
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > FLV, the FLV is either broken or was never
>> > > > > > > > > > > > > > > successfully created from the given file.
>> > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > Sebastian
>> > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
>> dyioulos@onpointfc.com>
>> > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > Good morning (or afternoon, as the case may
>> > > > > > > > > > > > > > > > be), all.
>> > > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > Just a brief aside: after setting up OM 2.0,
>> > > > > > > > > > > > > > > > with the
>> > > > > > >
>> > > > > > > help
>> > > > > > >
>> > > > > > > > > > > > > > > > of
>> > > > > > > > > > > >
>> > > > > > > > > > > > Maxim,
>> > > > > > > > > > > >
>> > > > > > > > > > > > > > > > Alexei, and
>> > > > > > > > > > > > > > > > others, I completely blew up the VM it was
>> > > > > > > > > > > > > > > > loaded on. It was my non-OM mistake
>> > > > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable
>> > > > > > > > > > > > > > > > (hadn't
>> > > > >
>> > > > > backed
>> > > > >
>> > > > > > > up
>> > > > > > >
>> > > > > > > > > the
>> > > > > > > > >
>> > > > > > > > > > > > > > > > VM, either. Arrgh.). So I created a new VM,
>> > > > > > > > > > > > > > > > and
>> > > > >
>> > > > > added
>> > > > >
>> > > > > > > > > > > > > > > > OM
>> > > > > > > > >
>> > > > > > > > > 2.0.
>> > > > > > > > >
>> > > > > > > > > > > > > > > > It was your kind and spot-on answers to my
>> > >
>> > > previous
>> > >
>> > > > > > > > > > > > > > > > questions that allowed me to
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > get
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > my install working properly. Again, my
>> > > > > > > > > > > > > > > > heartfelt thanks.
>> > > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > Now, to a new question. I've tried to
>> upload
>> > > > > > > > > > > > > > > > and stream
>> > > > > > >
>> > > > > > > a
>> > > > > > >
>> > > > > > > > > > > > > > > > small
>> > > > > > > > > > > >
>> > > > > > > > > > > > test
>> > > > > > > > > > > >
>> > > > > > > > > > > > > > > > avi. But,
>> > > > > > > > > > > > > > > > the upload fails, with this output:
>> > > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > Name: out
>> > > > > > > > > > > > > > > > Value:
>> > > > > > > > > > > > > > > > Name: exitValue
>> > > > > > > > > > > > > > > > Value: 1
>> > > > > > > > > > > > > > > > Name: command
>> > > > > > > > > > > > > > > > Value:
>> > > > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
>> > > > >
>> > > > >
>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>> > > > >
>> > > > > > > > >FL
>> > > > > > > > >
>> > > > > > > > > > > >V_
>> > > > > > > > > > > >
>> > > > > > > > > > > > > > > >5.flv, -vcodec,
>> > > > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
>> > > > > > > > > > > > > > > > 256x240,
>> > > > >
>> > > > >
>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>> > > > >
>> > > > > > > > >FL
>> > > > > > > > >
>> > > > > > > > > > > >V_
>> > > > > > > > > > > >
>> > > > > > > > > > > > > > > >5.jpg] Name: error
>> > > > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright
>> (c)
>> > > > > > > > > > > > > > > > 2000-2011 the
>> > > > > > > > > > > >
>> > > > > > > > > > > > FFmpeg
>> > > > > > > > > > > >
>> > > > > > > > > > > > > > > > developers
>> > > > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc
>> 4.4.6
>> > > > >
>> > > > > 20120305
>> > > > >
>> > > > > > > > > > > > > > > > (Red Hat
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > 4.4.6-4)
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > configuration: --enable-libmp3lame
>> > > > > > > > > > > > > > > > --enable-postproc --enable-gpl
>> > > > > > > > > > > > > > > > --enable-pthreads --enable-avfilter
>> > > > > > > > >
>> > > > > > > > > --prefix=/usr
>> > > > > > > > >
>> > > > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
>> > > > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
>> > > > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
>> > > > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
>> > > > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
>> > > > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
>> > > > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
>> > > > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
>> > > > >
>> > > > >
>> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
>> > > > >
>> > > > > > > > >FL
>> > > > > > > > >
>> > > > > > > > > > > >V_
>> > > > > > > > > > > >
>> > > > > > > > > > > > > > > >5.flv: Invalid data found when processing
>> input
>> > > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > Name: process
>> > > > > > > > > > > > > > > > Value: previewUpload ID :: 5
>> > > > > > > > > > > > > > > > Name: exitValue
>> > > > > > > > > > > > > > > > Value: 0
>> > > > > > > > > > > > > > > > Name: command
>> > > > > > > > > > > > > > > > Value:
>> > > > > > > > > > > > > > > > Name: completeName
>> > > > > > > > > > > > > > > > Value:
>> > > > >
>> > > > >
>> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
>> > > > >
>> > > > > > > > >21
>> > > > > > > > >
>> > > > > > > > > > > >36
>> > > > > > > > > > > >
>> > > > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
>> > > > > > > > > > > > > > > > Value:
>> > > > > > > > > > > > > > > > Name: fileExplorerItemId
>> > > > > > > > > > > > > > > > Value: 5
>> > > > > > > > > > > > > > > > Name: process
>> > > > > > > > > > > > > > > > Value:
>> > > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > I'm unable to interpret this output. Your
>> > > > > > > > > > > > > > > > assistance in solving would
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > be
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > appreciated, as ever.
>> > > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > Dimitri
>> > > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > > --
>> > > > > > > > > > > > > > > > This message has been scanned for viruses
>> and
>> > > > > > > > > > > > > > > > dangerous content by MailScanner, and is
>> > > > > > > > > > > > > > > > believed to be clean.
>> > > > > > > > > > > > > > >
>> > > > > > > > > > > > > > > --
>> > > > > > > > > > > > > > > Sebastian Wagner
>> > > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>> > > > > > > > > > > > > > > http://www.webbase-design.de
>> > > > > > > > > > > > > > > http://www.wagner-sebastian.com
>> > > > > > > > > > > > > > > seba.wagner@gmail.com
>> > > > > > > > > > > > > >
>> > > > > > > > > > > > > > --
>> > > > > > > > > > > > > > This message has been scanned for viruses and
>> > > > > > > > > > > > > > dangerous content by MailScanner, and is
>> > > > > > > > > > > > > > believed to be clean.
>> > > > > > > > > > > > >
>> > > > > > > > > > > > > --
>> > > > > > > > > > > > > Sebastian Wagner
>> > > > > > > > > > > > > https://twitter.com/#!/dead_lock
>> > > > > > > > > > > > > http://www.webbase-design.de
>> > > > > > > > > > > > > http://www.wagner-sebastian.com
>> > > > > > > > > > > > > seba.wagner@gmail.com
>> > > > > > > > > > > >
>> > > > > > > > > > > > --
>> > > > > > > > > > > > This message has been scanned for viruses and
>> > > > > > > > > > > > dangerous content by MailScanner, and is
>> > > > > > > > > > > > believed to be clean.
>> > > > > > > > > > >
>> > > > > > > > > > > --
>> > > > > > > > > > > Sebastian Wagner
>> > > > > > > > > > > https://twitter.com/#!/dead_lock
>> > > > > > > > > > > http://www.webbase-design.de
>> > > > > > > > > > > http://www.wagner-sebastian.com
>> > > > > > > > > > > seba.wagner@gmail.com
>> > > > > > > > >
>> > > > > > > > > --
>> > > > > > > > > This message has been scanned for viruses and
>> > > > > > > > > dangerous content by MailScanner, and is
>> > > > > > > > > believed to be clean.
>> > > > > > > >
>> > > > > > > > --
>> > > > > > > > Sebastian Wagner
>> > > > > > > > https://twitter.com/#!/dead_lock
>> > > > > > > > http://www.webbase-design.de
>> > > > > > > > http://www.wagner-sebastian.com
>> > > > > > > > seba.wagner@gmail.com
>> > > > > > >
>> > > > > > > --
>> > > > > > > This message has been scanned for viruses and
>> > > > > > > dangerous content by MailScanner, and is
>> > > > > > > believed to be clean.
>> > > > > >
>> > > > > > --
>> > > > > > WBR
>> > > > > > Maxim aka solomax
>> > > > >
>> > > > > --
>> > > > > This message has been scanned for viruses and
>> > > > > dangerous content by MailScanner, and is
>> > > > > believed to be clean.
>> > > >
>> > > > --
>> > > > WBR
>> > > > Maxim aka solomax
>> > >
>> > > --
>> > > This message has been scanned for viruses and
>> > > dangerous content by MailScanner, and is
>> > > believed to be clean.
>> >
>> > --
>> > Sebastian Wagner
>> > https://twitter.com/#!/dead_lock
>> > http://www.webbase-design.de
>> > http://www.wagner-sebastian.com
>> > seba.wagner@gmail.com
>>
>>
>>
>> --
>> This message has been scanned for viruses and
>> dangerous content by MailScanner, and is
>> believed to be clean.
>>
>>
>
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wagner@gmail.com
>
Re: Streaming video
Posted by "seba.wagner@gmail.com" <se...@gmail.com>.
Well then possibly the pause is not implemented either.
You can only stop and play the videos then "synchronized" between you and
the other conference participants.
Sebastian
2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> Sebastian,
>
> Clicking on the video didn't work, but that could just be me.
>
> Dimitri
>
>
> On Thursday 09 August 2012 10:37:15 am seba.wagner@gmail.com wrote:
> > I think you can pause if you simply click on the video.
> > Seek is not implemented however.
> >
> > Sebastian
> >
> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> >
> > > Maxim,
> > >
> > > Sorry I made you go through that, when a little digging on my part
> would
> > > have
> > > solved the problem. But, a related question:
> > >
> > > there's currently no ability to pause a video (or, at least none that I
> > > can see). From a development standpoint, is that doable and, if so,
> > > might that be
> > > added as a feature request?
> > >
> > > Dimitri
> > >
> > > On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
> > > > OK
> > > >
> > > > the longer steps :)
> > > > 1) file upload
> > > > 2) select file
> > > > 3) upload file
> > > > 4) wait until file is uploaded and appear under private or public
> files
> > > > 5) drag file from private or public files and drop it to the
> whiteboard
> > > >
> > > > just tested it on 2.1 works for me
> > > >
> > > > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <
> dyioulos@onpointfc.com
> > > >
> > > >wrote:
> > > > > Maxim,
> > > > >
> > > > > In the OM files tab, the only option is "File upload". If I use
> > > > > that,
> > >
> > > do
> > >
> > > > > a "select file", find my file, then drag-and-drop to whiteboard, it
> > > > > doesn't work.
> > > > >
> > > > > Dimitri
> > > > >
> > > > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
> > > > > > Open Files tab
> > > > > > drag your video to the whiteboard
> > > > > >
> > > > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
> > >
> > > dyioulos@onpointfc.com
> > >
> > > > > >wrote:
> > > > > > > "You might have to goto the file explorer and load it from
> there
> > > > > > > to the whiteboard."
> > > > > > >
> > > > > > > Er, how do I do that?
> > > > > > >
> > > > > > > Dimitri
> > > > > > >
> > > > > > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.comwrote:
> > > > > > > > * it never appears in the whiteboard.*
> > > > > > > > => but it is in the file explorer itself? Maybe just the
> > > > > > > > checkbox on the bottom of the upload window is not working
> > > > > > > > correctly for video files. You might have to goto the file
> > > > > > > > explorer and load it from
> > > > >
> > > > > there
> > > > >
> > > > > > > > to the whiteboard.
> > > > > > > >
> > > > > > > > Sebastian
> > > > > > > >
> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > >
> > > > > > > > > Spoke too soon (will I never learn). When I try to upload
> my
> > >
> > > avi
> > >
> > > > > > > > > (and, it does
> > > > > > > > > play in VLC), the UI dialog box shows that it's uploaded
> and
> > > > > > > > > converted. However, it never appears in the whiteboard.
> And,
> > > > > > > > > there are no errors.
> > > > > > > > >
> > > > > > > > > Ideas?
> > > > > > > > >
> > > > > > > > > Dimitri
> > > > > > > > >
> > > > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos
> wrote:
> > > > > > > > > > Sebastian,
> > > > > > > > > >
> > > > > > > > > > Well, I'm embarrassed. The avi I tired did not, in fact,
> > >
> > > work
> > >
> > > > > with
> > > > >
> > > > > > > > > > VLC.
> > > > > > > > >
> > > > > > > > > I
> > > > > > > > >
> > > > > > > > > > found another test avi, and it uploaded in OM just fine.
> > > > > > > > > >
> > > > > > > > > > Apologies for the noise.
> > > > > > > > > >
> > > > > > > > > > Dimitri
> > > > > > > > > >
> > > > > > > > > > On Thursday 09 August 2012 9:00:16 am
> > >
> > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > Does the file:
> > > > > > > > > > > /usr/local/openmeetings/
> > > > > > > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > > > > > > > > exist?
> > > > > > > > > > > Can you download and watch it using VLC-Player or any
> > > > > > > > > > > other
> > > > >
> > > > > Video
> > > > >
> > > > > > > > > player?
> > > > > > > > >
> > > > > > > > > > > Sebastian
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > >
> > > > > > > > > > > > Sebastian,
> > > > > > > > > > > >
> > > > > > > > > > > > This is all the output from the UI:
> > > > > > > > > > > >
> > > > > > > > > > > > Name: out
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > Value: 1
> > > > > > > > > > > > Name: command
> > > > > > > > > > > > Value:
> > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_ 6.flv, -vcodec,
> > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > 256x240,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_ 6.jpg] Name: error
> > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > > 2000-2011 the FFmpeg developers
> > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
> 20120305
> > > > > > > > > > > > (Red Hat 4.4.6-4)
> > > > > > > > > > > >
> > > > > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> > > > >
> > > > > --prefix=/usr
> > > > >
> > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > > > > > > > >
> > > > > > > > > > > > Name: process
> > > > > > > > > > > > Value: previewUpload ID :: 6
> > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > Value: 0
> > > > > > > > > > > > Name: command
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > Value:
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
> > > > >
> > > > > > > > >5a
> > > > > > > > >
> > > > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > Value: 6
> > > > > > > > > > > > Name: process
> > > > > > > > > > > > Value:
> > > > > > > > > > > >
> > > > > > > > > > > > Dimitri
> > > > > > > > > > > >
> > > > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
> > > > >
> > > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > > > > > > > => I donn't think so. Did you scroll or do "ctrl-a"
> > > > > > > > > > > > > before you
> > > > > > > > >
> > > > > > > > > copied
> > > > > > > > >
> > > > > > > > > > > > > the content?
> > > > > > > > > > > > >
> > > > > > > > > > > > > The error message in the UI should be sufficient.
> No
> > >
> > > need
> > >
> > > > > to
> > > > >
> > > > > > > > > > > > > search for anything in the logs at this point.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Sebastian
> > > > > > > > > > > > >
> > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > > > >
> > > > > > > > > > > > > > Hi, Sebastian.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I just copied what appeared in the OM instance on
> > > > > > > > > > > > > > my desktop
> > > > > > > > >
> > > > > > > > > when I
> > > > > > > > >
> > > > > > > > > > > > tried
> > > > > > > > > > > >
> > > > > > > > > > > > > > to
> > > > > > > > > > > > > > upload the avi. Error.log in the OM log
> directory
> > > > > > > > > > > > > > is empty.
> > > > > > > > >
> > > > > > > > > Would
> > > > > > > > >
> > > > > > > > > > > > > > I find the
> > > > > > > > > > > > > > output in red5.log or openmeetings.log? What
> would
> > > > > > > > > > > > > > I
> > > > >
> > > > > grep
> > > > >
> > > > > > > on?
> > > > > > >
> > > > > > > > > > > > > > Thanks.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
> > > > > > >
> > > > > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > > > > > > > > The conversation log error is much longer. You
> > > > > > > > > > > > > > > just copied the final
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > lines
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > that convert a screenshot for the preview of
> the
> > > > > > > > > > > > > > > video. The actual error already happened before
> > >
> > > when
> > >
> > > > > > > > > > > > > > > the video was converted to
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > a
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > FLV, the FLV is either broken or was never
> > > > > > > > > > > > > > > successfully created from the given file.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Sebastian
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
> dyioulos@onpointfc.com>
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Good morning (or afternoon, as the case may
> > > > > > > > > > > > > > > > be), all.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Just a brief aside: after setting up OM 2.0,
> > > > > > > > > > > > > > > > with the
> > > > > > >
> > > > > > > help
> > > > > > >
> > > > > > > > > > > > > > > > of
> > > > > > > > > > > >
> > > > > > > > > > > > Maxim,
> > > > > > > > > > > >
> > > > > > > > > > > > > > > > Alexei, and
> > > > > > > > > > > > > > > > others, I completely blew up the VM it was
> > > > > > > > > > > > > > > > loaded on. It was my non-OM mistake
> > > > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable
> > > > > > > > > > > > > > > > (hadn't
> > > > >
> > > > > backed
> > > > >
> > > > > > > up
> > > > > > >
> > > > > > > > > the
> > > > > > > > >
> > > > > > > > > > > > > > > > VM, either. Arrgh.). So I created a new VM,
> > > > > > > > > > > > > > > > and
> > > > >
> > > > > added
> > > > >
> > > > > > > > > > > > > > > > OM
> > > > > > > > >
> > > > > > > > > 2.0.
> > > > > > > > >
> > > > > > > > > > > > > > > > It was your kind and spot-on answers to my
> > >
> > > previous
> > >
> > > > > > > > > > > > > > > > questions that allowed me to
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > get
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > my install working properly. Again, my
> > > > > > > > > > > > > > > > heartfelt thanks.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Now, to a new question. I've tried to upload
> > > > > > > > > > > > > > > > and stream
> > > > > > >
> > > > > > > a
> > > > > > >
> > > > > > > > > > > > > > > > small
> > > > > > > > > > > >
> > > > > > > > > > > > test
> > > > > > > > > > > >
> > > > > > > > > > > > > > > > avi. But,
> > > > > > > > > > > > > > > > the upload fails, with this output:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Name: out
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > > > Value: 1
> > > > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_
> > > > > > > > > > > >
> > > > > > > > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > > > > > 256x240,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_
> > > > > > > > > > > >
> > > > > > > > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright
> (c)
> > > > > > > > > > > > > > > > 2000-2011 the
> > > > > > > > > > > >
> > > > > > > > > > > > FFmpeg
> > > > > > > > > > > >
> > > > > > > > > > > > > > > > developers
> > > > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc
> 4.4.6
> > > > >
> > > > > 20120305
> > > > >
> > > > > > > > > > > > > > > > (Red Hat
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > 4.4.6-4)
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > configuration: --enable-libmp3lame
> > > > > > > > > > > > > > > > --enable-postproc --enable-gpl
> > > > > > > > > > > > > > > > --enable-pthreads --enable-avfilter
> > > > > > > > >
> > > > > > > > > --prefix=/usr
> > > > > > > > >
> > > > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_
> > > > > > > > > > > >
> > > > > > > > > > > > > > > >5.flv: Invalid data found when processing
> input
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > > > Value: 0
> > > > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > > > > > Value:
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
> > > > >
> > > > > > > > >21
> > > > > > > > >
> > > > > > > > > > > >36
> > > > > > > > > > > >
> > > > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > > > > > Value: 5
> > > > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > I'm unable to interpret this output. Your
> > > > > > > > > > > > > > > > assistance in solving would
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > be
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > appreciated, as ever.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > --
> > > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > believed to be clean.
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > believed to be clean.
> > > > > > > >
> > > > > > > > --
> > > > > > > > Sebastian Wagner
> > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > http://www.webbase-design.de
> > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > seba.wagner@gmail.com
> > > > > > >
> > > > > > > --
> > > > > > > This message has been scanned for viruses and
> > > > > > > dangerous content by MailScanner, and is
> > > > > > > believed to be clean.
> > > > > >
> > > > > > --
> > > > > > WBR
> > > > > > Maxim aka solomax
> > > > >
> > > > > --
> > > > > This message has been scanned for viruses and
> > > > > dangerous content by MailScanner, and is
> > > > > believed to be clean.
> > > >
> > > > --
> > > > WBR
> > > > Maxim aka solomax
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> >
> > --
> > Sebastian Wagner
> > https://twitter.com/#!/dead_lock
> > http://www.webbase-design.de
> > http://www.wagner-sebastian.com
> > seba.wagner@gmail.com
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
Sebastian Wagner
https://twitter.com/#!/dead_lock
http://www.webbase-design.de
http://www.wagner-sebastian.com
seba.wagner@gmail.com
Re: Streaming video
Posted by Maxim Solodovnik <so...@gmail.com>.
I believe pause/seek is not implemented
Please file the issue
On Thu, Aug 9, 2012 at 9:41 PM, Dimitri Yioulos <dy...@onpointfc.com>wrote:
> Sebastian,
>
> Clicking on the video didn't work, but that could just be me.
>
> Dimitri
>
>
> On Thursday 09 August 2012 10:37:15 am seba.wagner@gmail.com wrote:
> > I think you can pause if you simply click on the video.
> > Seek is not implemented however.
> >
> > Sebastian
> >
> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> >
> > > Maxim,
> > >
> > > Sorry I made you go through that, when a little digging on my part
> would
> > > have
> > > solved the problem. But, a related question:
> > >
> > > there's currently no ability to pause a video (or, at least none that I
> > > can see). From a development standpoint, is that doable and, if so,
> > > might that be
> > > added as a feature request?
> > >
> > > Dimitri
> > >
> > > On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
> > > > OK
> > > >
> > > > the longer steps :)
> > > > 1) file upload
> > > > 2) select file
> > > > 3) upload file
> > > > 4) wait until file is uploaded and appear under private or public
> files
> > > > 5) drag file from private or public files and drop it to the
> whiteboard
> > > >
> > > > just tested it on 2.1 works for me
> > > >
> > > > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <
> dyioulos@onpointfc.com
> > > >
> > > >wrote:
> > > > > Maxim,
> > > > >
> > > > > In the OM files tab, the only option is "File upload". If I use
> > > > > that,
> > >
> > > do
> > >
> > > > > a "select file", find my file, then drag-and-drop to whiteboard, it
> > > > > doesn't work.
> > > > >
> > > > > Dimitri
> > > > >
> > > > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
> > > > > > Open Files tab
> > > > > > drag your video to the whiteboard
> > > > > >
> > > > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
> > >
> > > dyioulos@onpointfc.com
> > >
> > > > > >wrote:
> > > > > > > "You might have to goto the file explorer and load it from
> there
> > > > > > > to the whiteboard."
> > > > > > >
> > > > > > > Er, how do I do that?
> > > > > > >
> > > > > > > Dimitri
> > > > > > >
> > > > > > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.comwrote:
> > > > > > > > * it never appears in the whiteboard.*
> > > > > > > > => but it is in the file explorer itself? Maybe just the
> > > > > > > > checkbox on the bottom of the upload window is not working
> > > > > > > > correctly for video files. You might have to goto the file
> > > > > > > > explorer and load it from
> > > > >
> > > > > there
> > > > >
> > > > > > > > to the whiteboard.
> > > > > > > >
> > > > > > > > Sebastian
> > > > > > > >
> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > >
> > > > > > > > > Spoke too soon (will I never learn). When I try to upload
> my
> > >
> > > avi
> > >
> > > > > > > > > (and, it does
> > > > > > > > > play in VLC), the UI dialog box shows that it's uploaded
> and
> > > > > > > > > converted. However, it never appears in the whiteboard.
> And,
> > > > > > > > > there are no errors.
> > > > > > > > >
> > > > > > > > > Ideas?
> > > > > > > > >
> > > > > > > > > Dimitri
> > > > > > > > >
> > > > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos
> wrote:
> > > > > > > > > > Sebastian,
> > > > > > > > > >
> > > > > > > > > > Well, I'm embarrassed. The avi I tired did not, in fact,
> > >
> > > work
> > >
> > > > > with
> > > > >
> > > > > > > > > > VLC.
> > > > > > > > >
> > > > > > > > > I
> > > > > > > > >
> > > > > > > > > > found another test avi, and it uploaded in OM just fine.
> > > > > > > > > >
> > > > > > > > > > Apologies for the noise.
> > > > > > > > > >
> > > > > > > > > > Dimitri
> > > > > > > > > >
> > > > > > > > > > On Thursday 09 August 2012 9:00:16 am
> > >
> > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > Does the file:
> > > > > > > > > > > /usr/local/openmeetings/
> > > > > > > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > > > > > > > > exist?
> > > > > > > > > > > Can you download and watch it using VLC-Player or any
> > > > > > > > > > > other
> > > > >
> > > > > Video
> > > > >
> > > > > > > > > player?
> > > > > > > > >
> > > > > > > > > > > Sebastian
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > >
> > > > > > > > > > > > Sebastian,
> > > > > > > > > > > >
> > > > > > > > > > > > This is all the output from the UI:
> > > > > > > > > > > >
> > > > > > > > > > > > Name: out
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > Value: 1
> > > > > > > > > > > > Name: command
> > > > > > > > > > > > Value:
> > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_ 6.flv, -vcodec,
> > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > 256x240,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_ 6.jpg] Name: error
> > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > > 2000-2011 the FFmpeg developers
> > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
> 20120305
> > > > > > > > > > > > (Red Hat 4.4.6-4)
> > > > > > > > > > > >
> > > > > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> > > > >
> > > > > --prefix=/usr
> > > > >
> > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > > > > > > > >
> > > > > > > > > > > > Name: process
> > > > > > > > > > > > Value: previewUpload ID :: 6
> > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > Value: 0
> > > > > > > > > > > > Name: command
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > Value:
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
> > > > >
> > > > > > > > >5a
> > > > > > > > >
> > > > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > Value: 6
> > > > > > > > > > > > Name: process
> > > > > > > > > > > > Value:
> > > > > > > > > > > >
> > > > > > > > > > > > Dimitri
> > > > > > > > > > > >
> > > > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
> > > > >
> > > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > > > > > > > => I donn't think so. Did you scroll or do "ctrl-a"
> > > > > > > > > > > > > before you
> > > > > > > > >
> > > > > > > > > copied
> > > > > > > > >
> > > > > > > > > > > > > the content?
> > > > > > > > > > > > >
> > > > > > > > > > > > > The error message in the UI should be sufficient.
> No
> > >
> > > need
> > >
> > > > > to
> > > > >
> > > > > > > > > > > > > search for anything in the logs at this point.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Sebastian
> > > > > > > > > > > > >
> > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > > > >
> > > > > > > > > > > > > > Hi, Sebastian.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I just copied what appeared in the OM instance on
> > > > > > > > > > > > > > my desktop
> > > > > > > > >
> > > > > > > > > when I
> > > > > > > > >
> > > > > > > > > > > > tried
> > > > > > > > > > > >
> > > > > > > > > > > > > > to
> > > > > > > > > > > > > > upload the avi. Error.log in the OM log
> directory
> > > > > > > > > > > > > > is empty.
> > > > > > > > >
> > > > > > > > > Would
> > > > > > > > >
> > > > > > > > > > > > > > I find the
> > > > > > > > > > > > > > output in red5.log or openmeetings.log? What
> would
> > > > > > > > > > > > > > I
> > > > >
> > > > > grep
> > > > >
> > > > > > > on?
> > > > > > >
> > > > > > > > > > > > > > Thanks.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
> > > > > > >
> > > > > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > > > > > > > > The conversation log error is much longer. You
> > > > > > > > > > > > > > > just copied the final
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > lines
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > that convert a screenshot for the preview of
> the
> > > > > > > > > > > > > > > video. The actual error already happened before
> > >
> > > when
> > >
> > > > > > > > > > > > > > > the video was converted to
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > a
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > FLV, the FLV is either broken or was never
> > > > > > > > > > > > > > > successfully created from the given file.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Sebastian
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <
> dyioulos@onpointfc.com>
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Good morning (or afternoon, as the case may
> > > > > > > > > > > > > > > > be), all.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Just a brief aside: after setting up OM 2.0,
> > > > > > > > > > > > > > > > with the
> > > > > > >
> > > > > > > help
> > > > > > >
> > > > > > > > > > > > > > > > of
> > > > > > > > > > > >
> > > > > > > > > > > > Maxim,
> > > > > > > > > > > >
> > > > > > > > > > > > > > > > Alexei, and
> > > > > > > > > > > > > > > > others, I completely blew up the VM it was
> > > > > > > > > > > > > > > > loaded on. It was my non-OM mistake
> > > > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable
> > > > > > > > > > > > > > > > (hadn't
> > > > >
> > > > > backed
> > > > >
> > > > > > > up
> > > > > > >
> > > > > > > > > the
> > > > > > > > >
> > > > > > > > > > > > > > > > VM, either. Arrgh.). So I created a new VM,
> > > > > > > > > > > > > > > > and
> > > > >
> > > > > added
> > > > >
> > > > > > > > > > > > > > > > OM
> > > > > > > > >
> > > > > > > > > 2.0.
> > > > > > > > >
> > > > > > > > > > > > > > > > It was your kind and spot-on answers to my
> > >
> > > previous
> > >
> > > > > > > > > > > > > > > > questions that allowed me to
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > get
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > my install working properly. Again, my
> > > > > > > > > > > > > > > > heartfelt thanks.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Now, to a new question. I've tried to upload
> > > > > > > > > > > > > > > > and stream
> > > > > > >
> > > > > > > a
> > > > > > >
> > > > > > > > > > > > > > > > small
> > > > > > > > > > > >
> > > > > > > > > > > > test
> > > > > > > > > > > >
> > > > > > > > > > > > > > > > avi. But,
> > > > > > > > > > > > > > > > the upload fails, with this output:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Name: out
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > > > Value: 1
> > > > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_
> > > > > > > > > > > >
> > > > > > > > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > > > > > 256x240,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_
> > > > > > > > > > > >
> > > > > > > > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright
> (c)
> > > > > > > > > > > > > > > > 2000-2011 the
> > > > > > > > > > > >
> > > > > > > > > > > > FFmpeg
> > > > > > > > > > > >
> > > > > > > > > > > > > > > > developers
> > > > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc
> 4.4.6
> > > > >
> > > > > 20120305
> > > > >
> > > > > > > > > > > > > > > > (Red Hat
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > 4.4.6-4)
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > configuration: --enable-libmp3lame
> > > > > > > > > > > > > > > > --enable-postproc --enable-gpl
> > > > > > > > > > > > > > > > --enable-pthreads --enable-avfilter
> > > > > > > > >
> > > > > > > > > --prefix=/usr
> > > > > > > > >
> > > > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >
> > > > > > > > >FL
> > > > > > > > >
> > > > > > > > > > > >V_
> > > > > > > > > > > >
> > > > > > > > > > > > > > > >5.flv: Invalid data found when processing
> input
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > > > Value: 0
> > > > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > > > > > Value:
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
> > > > >
> > > > > > > > >21
> > > > > > > > >
> > > > > > > > > > > >36
> > > > > > > > > > > >
> > > > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > > > > > Value: 5
> > > > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > I'm unable to interpret this output. Your
> > > > > > > > > > > > > > > > assistance in solving would
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > be
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > appreciated, as ever.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > --
> > > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > believed to be clean.
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > believed to be clean.
> > > > > > > >
> > > > > > > > --
> > > > > > > > Sebastian Wagner
> > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > http://www.webbase-design.de
> > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > seba.wagner@gmail.com
> > > > > > >
> > > > > > > --
> > > > > > > This message has been scanned for viruses and
> > > > > > > dangerous content by MailScanner, and is
> > > > > > > believed to be clean.
> > > > > >
> > > > > > --
> > > > > > WBR
> > > > > > Maxim aka solomax
> > > > >
> > > > > --
> > > > > This message has been scanned for viruses and
> > > > > dangerous content by MailScanner, and is
> > > > > believed to be clean.
> > > >
> > > > --
> > > > WBR
> > > > Maxim aka solomax
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> >
> > --
> > Sebastian Wagner
> > https://twitter.com/#!/dead_lock
> > http://www.webbase-design.de
> > http://www.wagner-sebastian.com
> > seba.wagner@gmail.com
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
WBR
Maxim aka solomax
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
Sebastian,
Clicking on the video didn't work, but that could just be me.
Dimitri
On Thursday 09 August 2012 10:37:15 am seba.wagner@gmail.com wrote:
> I think you can pause if you simply click on the video.
> Seek is not implemented however.
>
> Sebastian
>
> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>
> > Maxim,
> >
> > Sorry I made you go through that, when a little digging on my part would
> > have
> > solved the problem. But, a related question:
> >
> > there's currently no ability to pause a video (or, at least none that I
> > can see). From a development standpoint, is that doable and, if so,
> > might that be
> > added as a feature request?
> >
> > Dimitri
> >
> > On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
> > > OK
> > >
> > > the longer steps :)
> > > 1) file upload
> > > 2) select file
> > > 3) upload file
> > > 4) wait until file is uploaded and appear under private or public files
> > > 5) drag file from private or public files and drop it to the whiteboard
> > >
> > > just tested it on 2.1 works for me
> > >
> > > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <dyioulos@onpointfc.com
> > >
> > >wrote:
> > > > Maxim,
> > > >
> > > > In the OM files tab, the only option is "File upload". If I use
> > > > that,
> >
> > do
> >
> > > > a "select file", find my file, then drag-and-drop to whiteboard, it
> > > > doesn't work.
> > > >
> > > > Dimitri
> > > >
> > > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
> > > > > Open Files tab
> > > > > drag your video to the whiteboard
> > > > >
> > > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
> >
> > dyioulos@onpointfc.com
> >
> > > > >wrote:
> > > > > > "You might have to goto the file explorer and load it from there
> > > > > > to the whiteboard."
> > > > > >
> > > > > > Er, how do I do that?
> > > > > >
> > > > > > Dimitri
> > > > > >
> > > > > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.com wrote:
> > > > > > > * it never appears in the whiteboard.*
> > > > > > > => but it is in the file explorer itself? Maybe just the
> > > > > > > checkbox on the bottom of the upload window is not working
> > > > > > > correctly for video files. You might have to goto the file
> > > > > > > explorer and load it from
> > > >
> > > > there
> > > >
> > > > > > > to the whiteboard.
> > > > > > >
> > > > > > > Sebastian
> > > > > > >
> > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > >
> > > > > > > > Spoke too soon (will I never learn). When I try to upload my
> >
> > avi
> >
> > > > > > > > (and, it does
> > > > > > > > play in VLC), the UI dialog box shows that it's uploaded and
> > > > > > > > converted. However, it never appears in the whiteboard. And,
> > > > > > > > there are no errors.
> > > > > > > >
> > > > > > > > Ideas?
> > > > > > > >
> > > > > > > > Dimitri
> > > > > > > >
> > > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> > > > > > > > > Sebastian,
> > > > > > > > >
> > > > > > > > > Well, I'm embarrassed. The avi I tired did not, in fact,
> >
> > work
> >
> > > > with
> > > >
> > > > > > > > > VLC.
> > > > > > > >
> > > > > > > > I
> > > > > > > >
> > > > > > > > > found another test avi, and it uploaded in OM just fine.
> > > > > > > > >
> > > > > > > > > Apologies for the noise.
> > > > > > > > >
> > > > > > > > > Dimitri
> > > > > > > > >
> > > > > > > > > On Thursday 09 August 2012 9:00:16 am
> >
> > seba.wagner@gmail.comwrote:
> > > > > > > > > > Does the file:
> > > > > > > > > > /usr/local/openmeetings/
> > > > > > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > > > > > > > exist?
> > > > > > > > > > Can you download and watch it using VLC-Player or any
> > > > > > > > > > other
> > > >
> > > > Video
> > > >
> > > > > > > > player?
> > > > > > > >
> > > > > > > > > > Sebastian
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > >
> > > > > > > > > > > Sebastian,
> > > > > > > > > > >
> > > > > > > > > > > This is all the output from the UI:
> > > > > > > > > > >
> > > > > > > > > > > Name: out
> > > > > > > > > > > Value:
> > > > > > > > > > > Name: exitValue
> > > > > > > > > > > Value: 1
> > > > > > > > > > > Name: command
> > > > > > > > > > > Value:
> > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >
> > > > > > > >FL
> > > > > > > >
> > > > > > > > > > >V_ 6.flv, -vcodec,
> > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > 256x240,
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >
> > > > > > > >FL
> > > > > > > >
> > > > > > > > > > >V_ 6.jpg] Name: error
> > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > 2000-2011 the FFmpeg developers
> > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305
> > > > > > > > > > > (Red Hat 4.4.6-4)
> > > > > > > > > > >
> > > > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> > > >
> > > > --prefix=/usr
> > > >
> > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >
> > > > > > > >FL
> > > > > > > >
> > > > > > > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > > > > > > >
> > > > > > > > > > > Name: process
> > > > > > > > > > > Value: previewUpload ID :: 6
> > > > > > > > > > > Name: exitValue
> > > > > > > > > > > Value: 0
> > > > > > > > > > > Name: command
> > > > > > > > > > > Value:
> > > > > > > > > > > Name: completeName
> > > > > > > > > > > Value:
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
> > > >
> > > > > > > >5a
> > > > > > > >
> > > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > > > > > > Value:
> > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > Value: 6
> > > > > > > > > > > Name: process
> > > > > > > > > > > Value:
> > > > > > > > > > >
> > > > > > > > > > > Dimitri
> > > > > > > > > > >
> > > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
> > > >
> > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > > > > > > => I donn't think so. Did you scroll or do "ctrl-a"
> > > > > > > > > > > > before you
> > > > > > > >
> > > > > > > > copied
> > > > > > > >
> > > > > > > > > > > > the content?
> > > > > > > > > > > >
> > > > > > > > > > > > The error message in the UI should be sufficient. No
> >
> > need
> >
> > > > to
> > > >
> > > > > > > > > > > > search for anything in the logs at this point.
> > > > > > > > > > > >
> > > > > > > > > > > > Sebastian
> > > > > > > > > > > >
> > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > > >
> > > > > > > > > > > > > Hi, Sebastian.
> > > > > > > > > > > > >
> > > > > > > > > > > > > I just copied what appeared in the OM instance on
> > > > > > > > > > > > > my desktop
> > > > > > > >
> > > > > > > > when I
> > > > > > > >
> > > > > > > > > > > tried
> > > > > > > > > > >
> > > > > > > > > > > > > to
> > > > > > > > > > > > > upload the avi. Error.log in the OM log directory
> > > > > > > > > > > > > is empty.
> > > > > > > >
> > > > > > > > Would
> > > > > > > >
> > > > > > > > > > > > > I find the
> > > > > > > > > > > > > output in red5.log or openmeetings.log? What would
> > > > > > > > > > > > > I
> > > >
> > > > grep
> > > >
> > > > > > on?
> > > > > >
> > > > > > > > > > > > > Thanks.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > >
> > > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
> > > > > >
> > > > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > > > > > > > The conversation log error is much longer. You
> > > > > > > > > > > > > > just copied the final
> > > > > > > > > > > > >
> > > > > > > > > > > > > lines
> > > > > > > > > > > > >
> > > > > > > > > > > > > > that convert a screenshot for the preview of the
> > > > > > > > > > > > > > video. The actual error already happened before
> >
> > when
> >
> > > > > > > > > > > > > > the video was converted to
> > > > > > > > > > > > >
> > > > > > > > > > > > > a
> > > > > > > > > > > > >
> > > > > > > > > > > > > > FLV, the FLV is either broken or was never
> > > > > > > > > > > > > > successfully created from the given file.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Sebastian
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Good morning (or afternoon, as the case may
> > > > > > > > > > > > > > > be), all.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Just a brief aside: after setting up OM 2.0,
> > > > > > > > > > > > > > > with the
> > > > > >
> > > > > > help
> > > > > >
> > > > > > > > > > > > > > > of
> > > > > > > > > > >
> > > > > > > > > > > Maxim,
> > > > > > > > > > >
> > > > > > > > > > > > > > > Alexei, and
> > > > > > > > > > > > > > > others, I completely blew up the VM it was
> > > > > > > > > > > > > > > loaded on. It was my non-OM mistake
> > > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable
> > > > > > > > > > > > > > > (hadn't
> > > >
> > > > backed
> > > >
> > > > > > up
> > > > > >
> > > > > > > > the
> > > > > > > >
> > > > > > > > > > > > > > > VM, either. Arrgh.). So I created a new VM,
> > > > > > > > > > > > > > > and
> > > >
> > > > added
> > > >
> > > > > > > > > > > > > > > OM
> > > > > > > >
> > > > > > > > 2.0.
> > > > > > > >
> > > > > > > > > > > > > > > It was your kind and spot-on answers to my
> >
> > previous
> >
> > > > > > > > > > > > > > > questions that allowed me to
> > > > > > > > > > > > >
> > > > > > > > > > > > > get
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > my install working properly. Again, my
> > > > > > > > > > > > > > > heartfelt thanks.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Now, to a new question. I've tried to upload
> > > > > > > > > > > > > > > and stream
> > > > > >
> > > > > > a
> > > > > >
> > > > > > > > > > > > > > > small
> > > > > > > > > > >
> > > > > > > > > > > test
> > > > > > > > > > >
> > > > > > > > > > > > > > > avi. But,
> > > > > > > > > > > > > > > the upload fails, with this output:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Name: out
> > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > > Value: 1
> > > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >
> > > > > > > >FL
> > > > > > > >
> > > > > > > > > > >V_
> > > > > > > > > > >
> > > > > > > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > > > > 256x240,
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >
> > > > > > > >FL
> > > > > > > >
> > > > > > > > > > >V_
> > > > > > > > > > >
> > > > > > > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > > > > > 2000-2011 the
> > > > > > > > > > >
> > > > > > > > > > > FFmpeg
> > > > > > > > > > >
> > > > > > > > > > > > > > > developers
> > > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
> > > >
> > > > 20120305
> > > >
> > > > > > > > > > > > > > > (Red Hat
> > > > > > > > > > > > >
> > > > > > > > > > > > > 4.4.6-4)
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > configuration: --enable-libmp3lame
> > > > > > > > > > > > > > > --enable-postproc --enable-gpl
> > > > > > > > > > > > > > > --enable-pthreads --enable-avfilter
> > > > > > > >
> > > > > > > > --prefix=/usr
> > > > > > > >
> > > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >
> > > > > > > >FL
> > > > > > > >
> > > > > > > > > > >V_
> > > > > > > > > > >
> > > > > > > > > > > > > > >5.flv: Invalid data found when processing input
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > > Value: 0
> > > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > > > > Value:
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
> > > >
> > > > > > > >21
> > > > > > > >
> > > > > > > > > > >36
> > > > > > > > > > >
> > > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > > > > Value: 5
> > > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > I'm unable to interpret this output. Your
> > > > > > > > > > > > > > > assistance in solving would
> > > > > > > > > > > > >
> > > > > > > > > > > > > be
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > appreciated, as ever.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > --
> > > > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > believed to be clean.
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Sebastian Wagner
> > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > seba.wagner@gmail.com
> > > > > > > >
> > > > > > > > --
> > > > > > > > This message has been scanned for viruses and
> > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > believed to be clean.
> > > > > > >
> > > > > > > --
> > > > > > > Sebastian Wagner
> > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > http://www.webbase-design.de
> > > > > > > http://www.wagner-sebastian.com
> > > > > > > seba.wagner@gmail.com
> > > > > >
> > > > > > --
> > > > > > This message has been scanned for viruses and
> > > > > > dangerous content by MailScanner, and is
> > > > > > believed to be clean.
> > > > >
> > > > > --
> > > > > WBR
> > > > > Maxim aka solomax
> > > >
> > > > --
> > > > This message has been scanned for viruses and
> > > > dangerous content by MailScanner, and is
> > > > believed to be clean.
> > >
> > > --
> > > WBR
> > > Maxim aka solomax
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wagner@gmail.com
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by "seba.wagner@gmail.com" <se...@gmail.com>.
I think you can pause if you simply click on the video.
Seek is not implemented however.
Sebastian
2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> Maxim,
>
> Sorry I made you go through that, when a little digging on my part would
> have
> solved the problem. But, a related question:
>
> there's currently no ability to pause a video (or, at least none that I can
> see). From a development standpoint, is that doable and, if so, might
> that be
> added as a feature request?
>
> Dimitri
>
>
> On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
> > OK
> >
> > the longer steps :)
> > 1) file upload
> > 2) select file
> > 3) upload file
> > 4) wait until file is uploaded and appear under private or public files
> > 5) drag file from private or public files and drop it to the whiteboard
> >
> > just tested it on 2.1 works for me
> >
> > On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <dyioulos@onpointfc.com
> >wrote:
> > > Maxim,
> > >
> > > In the OM files tab, the only option is "File upload". If I use that,
> do
> > > a "select file", find my file, then drag-and-drop to whiteboard, it
> > > doesn't work.
> > >
> > > Dimitri
> > >
> > > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
> > > > Open Files tab
> > > > drag your video to the whiteboard
> > > >
> > > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <
> dyioulos@onpointfc.com
> > > >
> > > >wrote:
> > > > > "You might have to goto the file explorer and load it from there to
> > > > > the whiteboard."
> > > > >
> > > > > Er, how do I do that?
> > > > >
> > > > > Dimitri
> > > > >
> > > > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.com wrote:
> > > > > > * it never appears in the whiteboard.*
> > > > > > => but it is in the file explorer itself? Maybe just the checkbox
> > > > > > on the bottom of the upload window is not working correctly for
> > > > > > video files. You might have to goto the file explorer and load it
> > > > > > from
> > >
> > > there
> > >
> > > > > > to the whiteboard.
> > > > > >
> > > > > > Sebastian
> > > > > >
> > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > >
> > > > > > > Spoke too soon (will I never learn). When I try to upload my
> avi
> > > > > > > (and, it does
> > > > > > > play in VLC), the UI dialog box shows that it's uploaded and
> > > > > > > converted. However, it never appears in the whiteboard. And,
> > > > > > > there are no errors.
> > > > > > >
> > > > > > > Ideas?
> > > > > > >
> > > > > > > Dimitri
> > > > > > >
> > > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> > > > > > > > Sebastian,
> > > > > > > >
> > > > > > > > Well, I'm embarrassed. The avi I tired did not, in fact,
> work
> > >
> > > with
> > >
> > > > > > > > VLC.
> > > > > > >
> > > > > > > I
> > > > > > >
> > > > > > > > found another test avi, and it uploaded in OM just fine.
> > > > > > > >
> > > > > > > > Apologies for the noise.
> > > > > > > >
> > > > > > > > Dimitri
> > > > > > > >
> > > > > > > > On Thursday 09 August 2012 9:00:16 am
> seba.wagner@gmail.comwrote:
> > > > > > > > > Does the file:
> > > > > > > > > /usr/local/openmeetings/
> > > > > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > > > > > > exist?
> > > > > > > > > Can you download and watch it using VLC-Player or any other
> > >
> > > Video
> > >
> > > > > > > player?
> > > > > > >
> > > > > > > > > Sebastian
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > >
> > > > > > > > > > Sebastian,
> > > > > > > > > >
> > > > > > > > > > This is all the output from the UI:
> > > > > > > > > >
> > > > > > > > > > Name: out
> > > > > > > > > > Value:
> > > > > > > > > > Name: exitValue
> > > > > > > > > > Value: 1
> > > > > > > > > > Name: command
> > > > > > > > > > Value:
> > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > >
> > > > > > >FL
> > > > > > >
> > > > > > > > > >V_ 6.flv, -vcodec,
> > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > 256x240,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > >
> > > > > > >FL
> > > > > > >
> > > > > > > > > >V_ 6.jpg] Name: error
> > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011
> > > > > > > > > > the FFmpeg developers
> > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305
> > > > > > > > > > (Red Hat 4.4.6-4)
> > > > > > > > > >
> > > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> > >
> > > --prefix=/usr
> > >
> > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > >
> > > > > > >FL
> > > > > > >
> > > > > > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > > > > > >
> > > > > > > > > > Name: process
> > > > > > > > > > Value: previewUpload ID :: 6
> > > > > > > > > > Name: exitValue
> > > > > > > > > > Value: 0
> > > > > > > > > > Name: command
> > > > > > > > > > Value:
> > > > > > > > > > Name: completeName
> > > > > > > > > > Value:
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
> > >
> > > > > > >5a
> > > > > > >
> > > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > > > > > Value:
> > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > Value: 6
> > > > > > > > > > Name: process
> > > > > > > > > > Value:
> > > > > > > > > >
> > > > > > > > > > Dimitri
> > > > > > > > > >
> > > > > > > > > > On Thursday 09 August 2012 8:45:06 am
> > >
> > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > > > > > => I donn't think so. Did you scroll or do "ctrl-a"
> > > > > > > > > > > before you
> > > > > > >
> > > > > > > copied
> > > > > > >
> > > > > > > > > > > the content?
> > > > > > > > > > >
> > > > > > > > > > > The error message in the UI should be sufficient. No
> need
> > >
> > > to
> > >
> > > > > > > > > > > search for anything in the logs at this point.
> > > > > > > > > > >
> > > > > > > > > > > Sebastian
> > > > > > > > > > >
> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > >
> > > > > > > > > > > > Hi, Sebastian.
> > > > > > > > > > > >
> > > > > > > > > > > > I just copied what appeared in the OM instance on my
> > > > > > > > > > > > desktop
> > > > > > >
> > > > > > > when I
> > > > > > >
> > > > > > > > > > tried
> > > > > > > > > >
> > > > > > > > > > > > to
> > > > > > > > > > > > upload the avi. Error.log in the OM log directory is
> > > > > > > > > > > > empty.
> > > > > > >
> > > > > > > Would
> > > > > > >
> > > > > > > > > > > > I find the
> > > > > > > > > > > > output in red5.log or openmeetings.log? What would I
> > >
> > > grep
> > >
> > > > > on?
> > > > >
> > > > > > > > > > > > Thanks.
> > > > > > > > > > > >
> > > > > > > > > > > > Dimitri
> > > > > > > > > > > >
> > > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
> > > > >
> > > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > > > > > > The conversation log error is much longer. You just
> > > > > > > > > > > > > copied the final
> > > > > > > > > > > >
> > > > > > > > > > > > lines
> > > > > > > > > > > >
> > > > > > > > > > > > > that convert a screenshot for the preview of the
> > > > > > > > > > > > > video. The actual error already happened before
> when
> > > > > > > > > > > > > the video was converted to
> > > > > > > > > > > >
> > > > > > > > > > > > a
> > > > > > > > > > > >
> > > > > > > > > > > > > FLV, the FLV is either broken or was never
> > > > > > > > > > > > > successfully created from the given file.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Sebastian
> > > > > > > > > > > > >
> > > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > > > >
> > > > > > > > > > > > > > Good morning (or afternoon, as the case may be),
> > > > > > > > > > > > > > all.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Just a brief aside: after setting up OM 2.0, with
> > > > > > > > > > > > > > the
> > > > >
> > > > > help
> > > > >
> > > > > > > > > > > > > > of
> > > > > > > > > >
> > > > > > > > > > Maxim,
> > > > > > > > > >
> > > > > > > > > > > > > > Alexei, and
> > > > > > > > > > > > > > others, I completely blew up the VM it was loaded
> > > > > > > > > > > > > > on. It was my non-OM mistake
> > > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable (hadn't
> > >
> > > backed
> > >
> > > > > up
> > > > >
> > > > > > > the
> > > > > > >
> > > > > > > > > > > > > > VM, either. Arrgh.). So I created a new VM, and
> > >
> > > added
> > >
> > > > > > > > > > > > > > OM
> > > > > > >
> > > > > > > 2.0.
> > > > > > >
> > > > > > > > > > > > > > It was your kind and spot-on answers to my
> previous
> > > > > > > > > > > > > > questions that allowed me to
> > > > > > > > > > > >
> > > > > > > > > > > > get
> > > > > > > > > > > >
> > > > > > > > > > > > > > my install working properly. Again, my heartfelt
> > > > > > > > > > > > > > thanks.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Now, to a new question. I've tried to upload and
> > > > > > > > > > > > > > stream
> > > > >
> > > > > a
> > > > >
> > > > > > > > > > > > > > small
> > > > > > > > > >
> > > > > > > > > > test
> > > > > > > > > >
> > > > > > > > > > > > > > avi. But,
> > > > > > > > > > > > > > the upload fails, with this output:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Name: out
> > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > Value: 1
> > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > >
> > > > > > >FL
> > > > > > >
> > > > > > > > > >V_
> > > > > > > > > >
> > > > > > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > > > 256x240,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > >
> > > > > > >FL
> > > > > > >
> > > > > > > > > >V_
> > > > > > > > > >
> > > > > > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > > > > 2000-2011 the
> > > > > > > > > >
> > > > > > > > > > FFmpeg
> > > > > > > > > >
> > > > > > > > > > > > > > developers
> > > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
> > >
> > > 20120305
> > >
> > > > > > > > > > > > > > (Red Hat
> > > > > > > > > > > >
> > > > > > > > > > > > 4.4.6-4)
> > > > > > > > > > > >
> > > > > > > > > > > > > > configuration: --enable-libmp3lame
> > > > > > > > > > > > > > --enable-postproc --enable-gpl --enable-pthreads
> > > > > > > > > > > > > > --enable-avfilter
> > > > > > >
> > > > > > > --prefix=/usr
> > > > > > >
> > > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > >
> > > > > > >FL
> > > > > > >
> > > > > > > > > >V_
> > > > > > > > > >
> > > > > > > > > > > > > >5.flv: Invalid data found when processing input
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > > Value: 0
> > > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > > > Value:
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
> > >
> > > > > > >21
> > > > > > >
> > > > > > > > > >36
> > > > > > > > > >
> > > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > > > Value: 5
> > > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > > Value:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I'm unable to interpret this output. Your
> > > > > > > > > > > > > > assistance in solving would
> > > > > > > > > > > >
> > > > > > > > > > > > be
> > > > > > > > > > > >
> > > > > > > > > > > > > > appreciated, as ever.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > --
> > > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > believed to be clean.
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > believed to be clean.
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Sebastian Wagner
> > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > http://www.webbase-design.de
> > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > seba.wagner@gmail.com
> > > > > > >
> > > > > > > --
> > > > > > > This message has been scanned for viruses and
> > > > > > > dangerous content by MailScanner, and is
> > > > > > > believed to be clean.
> > > > > >
> > > > > > --
> > > > > > Sebastian Wagner
> > > > > > https://twitter.com/#!/dead_lock
> > > > > > http://www.webbase-design.de
> > > > > > http://www.wagner-sebastian.com
> > > > > > seba.wagner@gmail.com
> > > > >
> > > > > --
> > > > > This message has been scanned for viruses and
> > > > > dangerous content by MailScanner, and is
> > > > > believed to be clean.
> > > >
> > > > --
> > > > WBR
> > > > Maxim aka solomax
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> >
> > --
> > WBR
> > Maxim aka solomax
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
Sebastian Wagner
https://twitter.com/#!/dead_lock
http://www.webbase-design.de
http://www.wagner-sebastian.com
seba.wagner@gmail.com
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
Maxim,
Sorry I made you go through that, when a little digging on my part would have
solved the problem. But, a related question:
there's currently no ability to pause a video (or, at least none that I can
see). From a development standpoint, is that doable and, if so, might that be
added as a feature request?
Dimitri
On Thursday 09 August 2012 10:23:40 am Maxim Solodovnik wrote:
> OK
>
> the longer steps :)
> 1) file upload
> 2) select file
> 3) upload file
> 4) wait until file is uploaded and appear under private or public files
> 5) drag file from private or public files and drop it to the whiteboard
>
> just tested it on 2.1 works for me
>
> On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <dy...@onpointfc.com>wrote:
> > Maxim,
> >
> > In the OM files tab, the only option is "File upload". If I use that, do
> > a "select file", find my file, then drag-and-drop to whiteboard, it
> > doesn't work.
> >
> > Dimitri
> >
> > On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
> > > Open Files tab
> > > drag your video to the whiteboard
> > >
> > > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <dyioulos@onpointfc.com
> > >
> > >wrote:
> > > > "You might have to goto the file explorer and load it from there to
> > > > the whiteboard."
> > > >
> > > > Er, how do I do that?
> > > >
> > > > Dimitri
> > > >
> > > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.com wrote:
> > > > > * it never appears in the whiteboard.*
> > > > > => but it is in the file explorer itself? Maybe just the checkbox
> > > > > on the bottom of the upload window is not working correctly for
> > > > > video files. You might have to goto the file explorer and load it
> > > > > from
> >
> > there
> >
> > > > > to the whiteboard.
> > > > >
> > > > > Sebastian
> > > > >
> > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > >
> > > > > > Spoke too soon (will I never learn). When I try to upload my avi
> > > > > > (and, it does
> > > > > > play in VLC), the UI dialog box shows that it's uploaded and
> > > > > > converted. However, it never appears in the whiteboard. And,
> > > > > > there are no errors.
> > > > > >
> > > > > > Ideas?
> > > > > >
> > > > > > Dimitri
> > > > > >
> > > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> > > > > > > Sebastian,
> > > > > > >
> > > > > > > Well, I'm embarrassed. The avi I tired did not, in fact, work
> >
> > with
> >
> > > > > > > VLC.
> > > > > >
> > > > > > I
> > > > > >
> > > > > > > found another test avi, and it uploaded in OM just fine.
> > > > > > >
> > > > > > > Apologies for the noise.
> > > > > > >
> > > > > > > Dimitri
> > > > > > >
> > > > > > > On Thursday 09 August 2012 9:00:16 am seba.wagner@gmail.comwrote:
> > > > > > > > Does the file:
> > > > > > > > /usr/local/openmeetings/
> > > > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > > > > > exist?
> > > > > > > > Can you download and watch it using VLC-Player or any other
> >
> > Video
> >
> > > > > > player?
> > > > > >
> > > > > > > > Sebastian
> > > > > > > >
> > > > > > > >
> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > >
> > > > > > > > > Sebastian,
> > > > > > > > >
> > > > > > > > > This is all the output from the UI:
> > > > > > > > >
> > > > > > > > > Name: out
> > > > > > > > > Value:
> > > > > > > > > Name: exitValue
> > > > > > > > > Value: 1
> > > > > > > > > Name: command
> > > > > > > > > Value:
> > > > > > > > > [/usr/bin/ffmpeg, -i,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > >FL
> > > > > >
> > > > > > > > >V_ 6.flv, -vcodec,
> > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > 256x240,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > >FL
> > > > > >
> > > > > > > > >V_ 6.jpg] Name: error
> > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011
> > > > > > > > > the FFmpeg developers
> > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305
> > > > > > > > > (Red Hat 4.4.6-4)
> > > > > > > > >
> > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> >
> > --prefix=/usr
> >
> > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > >FL
> > > > > >
> > > > > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > > > > >
> > > > > > > > > Name: process
> > > > > > > > > Value: previewUpload ID :: 6
> > > > > > > > > Name: exitValue
> > > > > > > > > Value: 0
> > > > > > > > > Name: command
> > > > > > > > > Value:
> > > > > > > > > Name: completeName
> > > > > > > > > Value:
> >
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
> >
> > > > > >5a
> > > > > >
> > > > > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > > > > Value:
> > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > Value: 6
> > > > > > > > > Name: process
> > > > > > > > > Value:
> > > > > > > > >
> > > > > > > > > Dimitri
> > > > > > > > >
> > > > > > > > > On Thursday 09 August 2012 8:45:06 am
> >
> > seba.wagner@gmail.comwrote:
> > > > > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > > > > => I donn't think so. Did you scroll or do "ctrl-a"
> > > > > > > > > > before you
> > > > > >
> > > > > > copied
> > > > > >
> > > > > > > > > > the content?
> > > > > > > > > >
> > > > > > > > > > The error message in the UI should be sufficient. No need
> >
> > to
> >
> > > > > > > > > > search for anything in the logs at this point.
> > > > > > > > > >
> > > > > > > > > > Sebastian
> > > > > > > > > >
> > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > >
> > > > > > > > > > > Hi, Sebastian.
> > > > > > > > > > >
> > > > > > > > > > > I just copied what appeared in the OM instance on my
> > > > > > > > > > > desktop
> > > > > >
> > > > > > when I
> > > > > >
> > > > > > > > > tried
> > > > > > > > >
> > > > > > > > > > > to
> > > > > > > > > > > upload the avi. Error.log in the OM log directory is
> > > > > > > > > > > empty.
> > > > > >
> > > > > > Would
> > > > > >
> > > > > > > > > > > I find the
> > > > > > > > > > > output in red5.log or openmeetings.log? What would I
> >
> > grep
> >
> > > > on?
> > > >
> > > > > > > > > > > Thanks.
> > > > > > > > > > >
> > > > > > > > > > > Dimitri
> > > > > > > > > > >
> > > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
> > > >
> > > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > > > > > The conversation log error is much longer. You just
> > > > > > > > > > > > copied the final
> > > > > > > > > > >
> > > > > > > > > > > lines
> > > > > > > > > > >
> > > > > > > > > > > > that convert a screenshot for the preview of the
> > > > > > > > > > > > video. The actual error already happened before when
> > > > > > > > > > > > the video was converted to
> > > > > > > > > > >
> > > > > > > > > > > a
> > > > > > > > > > >
> > > > > > > > > > > > FLV, the FLV is either broken or was never
> > > > > > > > > > > > successfully created from the given file.
> > > > > > > > > > > >
> > > > > > > > > > > > Sebastian
> > > > > > > > > > > >
> > > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > > >
> > > > > > > > > > > > > Good morning (or afternoon, as the case may be),
> > > > > > > > > > > > > all.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Just a brief aside: after setting up OM 2.0, with
> > > > > > > > > > > > > the
> > > >
> > > > help
> > > >
> > > > > > > > > > > > > of
> > > > > > > > >
> > > > > > > > > Maxim,
> > > > > > > > >
> > > > > > > > > > > > > Alexei, and
> > > > > > > > > > > > > others, I completely blew up the VM it was loaded
> > > > > > > > > > > > > on. It was my non-OM mistake
> > > > > > > > > > > > > (yup, I make 'em), and was unrecoverable (hadn't
> >
> > backed
> >
> > > > up
> > > >
> > > > > > the
> > > > > >
> > > > > > > > > > > > > VM, either. Arrgh.). So I created a new VM, and
> >
> > added
> >
> > > > > > > > > > > > > OM
> > > > > >
> > > > > > 2.0.
> > > > > >
> > > > > > > > > > > > > It was your kind and spot-on answers to my previous
> > > > > > > > > > > > > questions that allowed me to
> > > > > > > > > > >
> > > > > > > > > > > get
> > > > > > > > > > >
> > > > > > > > > > > > > my install working properly. Again, my heartfelt
> > > > > > > > > > > > > thanks.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Now, to a new question. I've tried to upload and
> > > > > > > > > > > > > stream
> > > >
> > > > a
> > > >
> > > > > > > > > > > > > small
> > > > > > > > >
> > > > > > > > > test
> > > > > > > > >
> > > > > > > > > > > > > avi. But,
> > > > > > > > > > > > > the upload fails, with this output:
> > > > > > > > > > > > >
> > > > > > > > > > > > > Name: out
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > Value: 1
> > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > >FL
> > > > > >
> > > > > > > > >V_
> > > > > > > > >
> > > > > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > > 256x240,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > >FL
> > > > > >
> > > > > > > > >V_
> > > > > > > > >
> > > > > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > > > 2000-2011 the
> > > > > > > > >
> > > > > > > > > FFmpeg
> > > > > > > > >
> > > > > > > > > > > > > developers
> > > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
> >
> > 20120305
> >
> > > > > > > > > > > > > (Red Hat
> > > > > > > > > > >
> > > > > > > > > > > 4.4.6-4)
> > > > > > > > > > >
> > > > > > > > > > > > > configuration: --enable-libmp3lame
> > > > > > > > > > > > > --enable-postproc --enable-gpl --enable-pthreads
> > > > > > > > > > > > > --enable-avfilter
> > > > > >
> > > > > > --prefix=/usr
> > > > > >
> > > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> >
> > > > > >FL
> > > > > >
> > > > > > > > >V_
> > > > > > > > >
> > > > > > > > > > > > >5.flv: Invalid data found when processing input
> > > > > > > > > > > > >
> > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > > Value: 0
> > > > > > > > > > > > > Name: command
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > > Value:
> >
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
> >
> > > > > >21
> > > > > >
> > > > > > > > >36
> > > > > > > > >
> > > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > > Value: 5
> > > > > > > > > > > > > Name: process
> > > > > > > > > > > > > Value:
> > > > > > > > > > > > >
> > > > > > > > > > > > > I'm unable to interpret this output. Your
> > > > > > > > > > > > > assistance in solving would
> > > > > > > > > > >
> > > > > > > > > > > be
> > > > > > > > > > >
> > > > > > > > > > > > > appreciated, as ever.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Dimitri
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > > believed to be clean.
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > believed to be clean.
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Sebastian Wagner
> > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > believed to be clean.
> > > > > > > >
> > > > > > > > --
> > > > > > > > Sebastian Wagner
> > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > http://www.webbase-design.de
> > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > seba.wagner@gmail.com
> > > > > >
> > > > > > --
> > > > > > This message has been scanned for viruses and
> > > > > > dangerous content by MailScanner, and is
> > > > > > believed to be clean.
> > > > >
> > > > > --
> > > > > Sebastian Wagner
> > > > > https://twitter.com/#!/dead_lock
> > > > > http://www.webbase-design.de
> > > > > http://www.wagner-sebastian.com
> > > > > seba.wagner@gmail.com
> > > >
> > > > --
> > > > This message has been scanned for viruses and
> > > > dangerous content by MailScanner, and is
> > > > believed to be clean.
> > >
> > > --
> > > WBR
> > > Maxim aka solomax
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
>
> --
> WBR
> Maxim aka solomax
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by Maxim Solodovnik <so...@gmail.com>.
OK
the longer steps :)
1) file upload
2) select file
3) upload file
4) wait until file is uploaded and appear under private or public files
5) drag file from private or public files and drop it to the whiteboard
just tested it on 2.1 works for me
On Thu, Aug 9, 2012 at 9:18 PM, Dimitri Yioulos <dy...@onpointfc.com>wrote:
> Maxim,
>
> In the OM files tab, the only option is "File upload". If I use that, do
> a "select file", find my file, then drag-and-drop to whiteboard, it doesn't
> work.
>
> Dimitri
>
>
> On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
> > Open Files tab
> > drag your video to the whiteboard
> >
> > On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <dyioulos@onpointfc.com
> >wrote:
> > > "You might have to goto the file explorer and load it from there to the
> > > whiteboard."
> > >
> > > Er, how do I do that?
> > >
> > > Dimitri
> > >
> > > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.com wrote:
> > > > * it never appears in the whiteboard.*
> > > > => but it is in the file explorer itself? Maybe just the checkbox on
> > > > the bottom of the upload window is not working correctly for video
> > > > files. You might have to goto the file explorer and load it from
> there
> > > > to the whiteboard.
> > > >
> > > > Sebastian
> > > >
> > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > >
> > > > > Spoke too soon (will I never learn). When I try to upload my avi
> > > > > (and, it does
> > > > > play in VLC), the UI dialog box shows that it's uploaded and
> > > > > converted. However, it never appears in the whiteboard. And, there
> > > > > are no errors.
> > > > >
> > > > > Ideas?
> > > > >
> > > > > Dimitri
> > > > >
> > > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> > > > > > Sebastian,
> > > > > >
> > > > > > Well, I'm embarrassed. The avi I tired did not, in fact, work
> with
> > > > > > VLC.
> > > > >
> > > > > I
> > > > >
> > > > > > found another test avi, and it uploaded in OM just fine.
> > > > > >
> > > > > > Apologies for the noise.
> > > > > >
> > > > > > Dimitri
> > > > > >
> > > > > > On Thursday 09 August 2012 9:00:16 am seba.wagner@gmail.comwrote:
> > > > > > > Does the file:
> > > > > > > /usr/local/openmeetings/
> > > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > > > > exist?
> > > > > > > Can you download and watch it using VLC-Player or any other
> Video
> > > > >
> > > > > player?
> > > > >
> > > > > > > Sebastian
> > > > > > >
> > > > > > >
> > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > >
> > > > > > > > Sebastian,
> > > > > > > >
> > > > > > > > This is all the output from the UI:
> > > > > > > >
> > > > > > > > Name: out
> > > > > > > > Value:
> > > > > > > > Name: exitValue
> > > > > > > > Value: 1
> > > > > > > > Name: command
> > > > > > > > Value:
> > > > > > > > [/usr/bin/ffmpeg, -i,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >FL
> > > > >
> > > > > > > >V_ 6.flv, -vcodec,
> > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > 256x240,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >FL
> > > > >
> > > > > > > >V_ 6.jpg] Name: error
> > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the
> > > > > > > > FFmpeg developers
> > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red
> > > > > > > > Hat 4.4.6-4)
> > > > > > > >
> > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> --prefix=/usr
> > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >FL
> > > > >
> > > > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > > > >
> > > > > > > > Name: process
> > > > > > > > Value: previewUpload ID :: 6
> > > > > > > > Name: exitValue
> > > > > > > > Value: 0
> > > > > > > > Name: command
> > > > > > > > Value:
> > > > > > > > Name: completeName
> > > > > > > > Value:
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
> > > > >5a
> > > > >
> > > > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > > > Value:
> > > > > > > > Name: fileExplorerItemId
> > > > > > > > Value: 6
> > > > > > > > Name: process
> > > > > > > > Value:
> > > > > > > >
> > > > > > > > Dimitri
> > > > > > > >
> > > > > > > > On Thursday 09 August 2012 8:45:06 am
> seba.wagner@gmail.comwrote:
> > > > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > > > => I donn't think so. Did you scroll or do "ctrl-a" before
> > > > > > > > > you
> > > > >
> > > > > copied
> > > > >
> > > > > > > > > the content?
> > > > > > > > >
> > > > > > > > > The error message in the UI should be sufficient. No need
> to
> > > > > > > > > search for anything in the logs at this point.
> > > > > > > > >
> > > > > > > > > Sebastian
> > > > > > > > >
> > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > >
> > > > > > > > > > Hi, Sebastian.
> > > > > > > > > >
> > > > > > > > > > I just copied what appeared in the OM instance on my
> > > > > > > > > > desktop
> > > > >
> > > > > when I
> > > > >
> > > > > > > > tried
> > > > > > > >
> > > > > > > > > > to
> > > > > > > > > > upload the avi. Error.log in the OM log directory is
> > > > > > > > > > empty.
> > > > >
> > > > > Would
> > > > >
> > > > > > > > > > I find the
> > > > > > > > > > output in red5.log or openmeetings.log? What would I
> grep
> > >
> > > on?
> > >
> > > > > > > > > > Thanks.
> > > > > > > > > >
> > > > > > > > > > Dimitri
> > > > > > > > > >
> > > > > > > > > > On Thursday 09 August 2012 8:26:48 am
> > >
> > > seba.wagner@gmail.comwrote:
> > > > > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > > > > The conversation log error is much longer. You just
> > > > > > > > > > > copied the final
> > > > > > > > > >
> > > > > > > > > > lines
> > > > > > > > > >
> > > > > > > > > > > that convert a screenshot for the preview of the video.
> > > > > > > > > > > The actual error already happened before when the video
> > > > > > > > > > > was converted to
> > > > > > > > > >
> > > > > > > > > > a
> > > > > > > > > >
> > > > > > > > > > > FLV, the FLV is either broken or was never successfully
> > > > > > > > > > > created from the given file.
> > > > > > > > > > >
> > > > > > > > > > > Sebastian
> > > > > > > > > > >
> > > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > > >
> > > > > > > > > > > > Good morning (or afternoon, as the case may be), all.
> > > > > > > > > > > >
> > > > > > > > > > > > Just a brief aside: after setting up OM 2.0, with the
> > >
> > > help
> > >
> > > > > > > > > > > > of
> > > > > > > >
> > > > > > > > Maxim,
> > > > > > > >
> > > > > > > > > > > > Alexei, and
> > > > > > > > > > > > others, I completely blew up the VM it was loaded on.
> > > > > > > > > > > > It was my non-OM mistake
> > > > > > > > > > > > (yup, I make 'em), and was unrecoverable (hadn't
> backed
> > >
> > > up
> > >
> > > > > the
> > > > >
> > > > > > > > > > > > VM, either. Arrgh.). So I created a new VM, and
> added
> > > > > > > > > > > > OM
> > > > >
> > > > > 2.0.
> > > > >
> > > > > > > > > > > > It was your kind and spot-on answers to my previous
> > > > > > > > > > > > questions that allowed me to
> > > > > > > > > >
> > > > > > > > > > get
> > > > > > > > > >
> > > > > > > > > > > > my install working properly. Again, my heartfelt
> > > > > > > > > > > > thanks.
> > > > > > > > > > > >
> > > > > > > > > > > > Now, to a new question. I've tried to upload and
> > > > > > > > > > > > stream
> > >
> > > a
> > >
> > > > > > > > > > > > small
> > > > > > > >
> > > > > > > > test
> > > > > > > >
> > > > > > > > > > > > avi. But,
> > > > > > > > > > > > the upload fails, with this output:
> > > > > > > > > > > >
> > > > > > > > > > > > Name: out
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > Value: 1
> > > > > > > > > > > > Name: command
> > > > > > > > > > > > Value:
> > > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >FL
> > > > >
> > > > > > > >V_
> > > > > > > >
> > > > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > > 256x240,
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >FL
> > > > >
> > > > > > > >V_
> > > > > > > >
> > > > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > > 2000-2011 the
> > > > > > > >
> > > > > > > > FFmpeg
> > > > > > > >
> > > > > > > > > > > > developers
> > > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6
> 20120305
> > > > > > > > > > > > (Red Hat
> > > > > > > > > >
> > > > > > > > > > 4.4.6-4)
> > > > > > > > > >
> > > > > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> > > > >
> > > > > --prefix=/usr
> > > > >
> > > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > > >FL
> > > > >
> > > > > > > >V_
> > > > > > > >
> > > > > > > > > > > >5.flv: Invalid data found when processing input
> > > > > > > > > > > >
> > > > > > > > > > > > Name: process
> > > > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > > > Name: exitValue
> > > > > > > > > > > > Value: 0
> > > > > > > > > > > > Name: command
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: completeName
> > > > > > > > > > > > Value:
> > > > >
> > > > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
> > > > >21
> > > > >
> > > > > > > >36
> > > > > > > >
> > > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > > > Value:
> > > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > > Value: 5
> > > > > > > > > > > > Name: process
> > > > > > > > > > > > Value:
> > > > > > > > > > > >
> > > > > > > > > > > > I'm unable to interpret this output. Your assistance
> > > > > > > > > > > > in solving would
> > > > > > > > > >
> > > > > > > > > > be
> > > > > > > > > >
> > > > > > > > > > > > appreciated, as ever.
> > > > > > > > > > > >
> > > > > > > > > > > > Dimitri
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > > believed to be clean.
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Sebastian Wagner
> > > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > believed to be clean.
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Sebastian Wagner
> > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > http://www.webbase-design.de
> > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > seba.wagner@gmail.com
> > > > > > > >
> > > > > > > > --
> > > > > > > > This message has been scanned for viruses and
> > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > believed to be clean.
> > > > > > >
> > > > > > > --
> > > > > > > Sebastian Wagner
> > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > http://www.webbase-design.de
> > > > > > > http://www.wagner-sebastian.com
> > > > > > > seba.wagner@gmail.com
> > > > >
> > > > > --
> > > > > This message has been scanned for viruses and
> > > > > dangerous content by MailScanner, and is
> > > > > believed to be clean.
> > > >
> > > > --
> > > > Sebastian Wagner
> > > > https://twitter.com/#!/dead_lock
> > > > http://www.webbase-design.de
> > > > http://www.wagner-sebastian.com
> > > > seba.wagner@gmail.com
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> >
> > --
> > WBR
> > Maxim aka solomax
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
WBR
Maxim aka solomax
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
Maxim,
In the OM files tab, the only option is "File upload". If I use that, do
a "select file", find my file, then drag-and-drop to whiteboard, it doesn't
work.
Dimitri
On Thursday 09 August 2012 10:06:55 am Maxim Solodovnik wrote:
> Open Files tab
> drag your video to the whiteboard
>
> On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <dy...@onpointfc.com>wrote:
> > "You might have to goto the file explorer and load it from there to the
> > whiteboard."
> >
> > Er, how do I do that?
> >
> > Dimitri
> >
> > On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.com wrote:
> > > * it never appears in the whiteboard.*
> > > => but it is in the file explorer itself? Maybe just the checkbox on
> > > the bottom of the upload window is not working correctly for video
> > > files. You might have to goto the file explorer and load it from there
> > > to the whiteboard.
> > >
> > > Sebastian
> > >
> > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > >
> > > > Spoke too soon (will I never learn). When I try to upload my avi
> > > > (and, it does
> > > > play in VLC), the UI dialog box shows that it's uploaded and
> > > > converted. However, it never appears in the whiteboard. And, there
> > > > are no errors.
> > > >
> > > > Ideas?
> > > >
> > > > Dimitri
> > > >
> > > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> > > > > Sebastian,
> > > > >
> > > > > Well, I'm embarrassed. The avi I tired did not, in fact, work with
> > > > > VLC.
> > > >
> > > > I
> > > >
> > > > > found another test avi, and it uploaded in OM just fine.
> > > > >
> > > > > Apologies for the noise.
> > > > >
> > > > > Dimitri
> > > > >
> > > > > On Thursday 09 August 2012 9:00:16 am seba.wagner@gmail.com wrote:
> > > > > > Does the file:
> > > > > > /usr/local/openmeetings/
> > > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > > > exist?
> > > > > > Can you download and watch it using VLC-Player or any other Video
> > > >
> > > > player?
> > > >
> > > > > > Sebastian
> > > > > >
> > > > > >
> > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > >
> > > > > > > Sebastian,
> > > > > > >
> > > > > > > This is all the output from the UI:
> > > > > > >
> > > > > > > Name: out
> > > > > > > Value:
> > > > > > > Name: exitValue
> > > > > > > Value: 1
> > > > > > > Name: command
> > > > > > > Value:
> > > > > > > [/usr/bin/ffmpeg, -i,
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >FL
> > > >
> > > > > > >V_ 6.flv, -vcodec,
> > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > 256x240,
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >FL
> > > >
> > > > > > >V_ 6.jpg] Name: error
> > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the
> > > > > > > FFmpeg developers
> > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red
> > > > > > > Hat 4.4.6-4)
> > > > > > >
> > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > --enable-gpl --enable-pthreads --enable-avfilter --prefix=/usr
> > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >FL
> > > >
> > > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > > >
> > > > > > > Name: process
> > > > > > > Value: previewUpload ID :: 6
> > > > > > > Name: exitValue
> > > > > > > Value: 0
> > > > > > > Name: command
> > > > > > > Value:
> > > > > > > Name: completeName
> > > > > > > Value:
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a6
> > > >5a
> > > >
> > > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > > Value:
> > > > > > > Name: fileExplorerItemId
> > > > > > > Value: 6
> > > > > > > Name: process
> > > > > > > Value:
> > > > > > >
> > > > > > > Dimitri
> > > > > > >
> > > > > > > On Thursday 09 August 2012 8:45:06 am seba.wagner@gmail.comwrote:
> > > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > > => I donn't think so. Did you scroll or do "ctrl-a" before
> > > > > > > > you
> > > >
> > > > copied
> > > >
> > > > > > > > the content?
> > > > > > > >
> > > > > > > > The error message in the UI should be sufficient. No need to
> > > > > > > > search for anything in the logs at this point.
> > > > > > > >
> > > > > > > > Sebastian
> > > > > > > >
> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > >
> > > > > > > > > Hi, Sebastian.
> > > > > > > > >
> > > > > > > > > I just copied what appeared in the OM instance on my
> > > > > > > > > desktop
> > > >
> > > > when I
> > > >
> > > > > > > tried
> > > > > > >
> > > > > > > > > to
> > > > > > > > > upload the avi. Error.log in the OM log directory is
> > > > > > > > > empty.
> > > >
> > > > Would
> > > >
> > > > > > > > > I find the
> > > > > > > > > output in red5.log or openmeetings.log? What would I grep
> >
> > on?
> >
> > > > > > > > > Thanks.
> > > > > > > > >
> > > > > > > > > Dimitri
> > > > > > > > >
> > > > > > > > > On Thursday 09 August 2012 8:26:48 am
> >
> > seba.wagner@gmail.comwrote:
> > > > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > > > The conversation log error is much longer. You just
> > > > > > > > > > copied the final
> > > > > > > > >
> > > > > > > > > lines
> > > > > > > > >
> > > > > > > > > > that convert a screenshot for the preview of the video.
> > > > > > > > > > The actual error already happened before when the video
> > > > > > > > > > was converted to
> > > > > > > > >
> > > > > > > > > a
> > > > > > > > >
> > > > > > > > > > FLV, the FLV is either broken or was never successfully
> > > > > > > > > > created from the given file.
> > > > > > > > > >
> > > > > > > > > > Sebastian
> > > > > > > > > >
> > > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > > >
> > > > > > > > > > > Good morning (or afternoon, as the case may be), all.
> > > > > > > > > > >
> > > > > > > > > > > Just a brief aside: after setting up OM 2.0, with the
> >
> > help
> >
> > > > > > > > > > > of
> > > > > > >
> > > > > > > Maxim,
> > > > > > >
> > > > > > > > > > > Alexei, and
> > > > > > > > > > > others, I completely blew up the VM it was loaded on.
> > > > > > > > > > > It was my non-OM mistake
> > > > > > > > > > > (yup, I make 'em), and was unrecoverable (hadn't backed
> >
> > up
> >
> > > > the
> > > >
> > > > > > > > > > > VM, either. Arrgh.). So I created a new VM, and added
> > > > > > > > > > > OM
> > > >
> > > > 2.0.
> > > >
> > > > > > > > > > > It was your kind and spot-on answers to my previous
> > > > > > > > > > > questions that allowed me to
> > > > > > > > >
> > > > > > > > > get
> > > > > > > > >
> > > > > > > > > > > my install working properly. Again, my heartfelt
> > > > > > > > > > > thanks.
> > > > > > > > > > >
> > > > > > > > > > > Now, to a new question. I've tried to upload and
> > > > > > > > > > > stream
> >
> > a
> >
> > > > > > > > > > > small
> > > > > > >
> > > > > > > test
> > > > > > >
> > > > > > > > > > > avi. But,
> > > > > > > > > > > the upload fails, with this output:
> > > > > > > > > > >
> > > > > > > > > > > Name: out
> > > > > > > > > > > Value:
> > > > > > > > > > > Name: exitValue
> > > > > > > > > > > Value: 1
> > > > > > > > > > > Name: command
> > > > > > > > > > > Value:
> > > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >FL
> > > >
> > > > > > >V_
> > > > > > >
> > > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > > 256x240,
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >FL
> > > >
> > > > > > >V_
> > > > > > >
> > > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c)
> > > > > > > > > > > 2000-2011 the
> > > > > > >
> > > > > > > FFmpeg
> > > > > > >
> > > > > > > > > > > developers
> > > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305
> > > > > > > > > > > (Red Hat
> > > > > > > > >
> > > > > > > > > 4.4.6-4)
> > > > > > > > >
> > > > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> > > >
> > > > --prefix=/usr
> > > >
> > > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOAD
> > > >FL
> > > >
> > > > > > >V_
> > > > > > >
> > > > > > > > > > >5.flv: Invalid data found when processing input
> > > > > > > > > > >
> > > > > > > > > > > Name: process
> > > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > > Name: exitValue
> > > > > > > > > > > Value: 0
> > > > > > > > > > > Name: command
> > > > > > > > > > > Value:
> > > > > > > > > > > Name: completeName
> > > > > > > > > > > Value:
> > > >
> > > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f
> > > >21
> > > >
> > > > > > >36
> > > > > > >
> > > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > > Value:
> > > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > > Value: 5
> > > > > > > > > > > Name: process
> > > > > > > > > > > Value:
> > > > > > > > > > >
> > > > > > > > > > > I'm unable to interpret this output. Your assistance
> > > > > > > > > > > in solving would
> > > > > > > > >
> > > > > > > > > be
> > > > > > > > >
> > > > > > > > > > > appreciated, as ever.
> > > > > > > > > > >
> > > > > > > > > > > Dimitri
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > > believed to be clean.
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Sebastian Wagner
> > > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > > http://www.webbase-design.de
> > > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > > seba.wagner@gmail.com
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > believed to be clean.
> > > > > > > >
> > > > > > > > --
> > > > > > > > Sebastian Wagner
> > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > http://www.webbase-design.de
> > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > seba.wagner@gmail.com
> > > > > > >
> > > > > > > --
> > > > > > > This message has been scanned for viruses and
> > > > > > > dangerous content by MailScanner, and is
> > > > > > > believed to be clean.
> > > > > >
> > > > > > --
> > > > > > Sebastian Wagner
> > > > > > https://twitter.com/#!/dead_lock
> > > > > > http://www.webbase-design.de
> > > > > > http://www.wagner-sebastian.com
> > > > > > seba.wagner@gmail.com
> > > >
> > > > --
> > > > This message has been scanned for viruses and
> > > > dangerous content by MailScanner, and is
> > > > believed to be clean.
> > >
> > > --
> > > Sebastian Wagner
> > > https://twitter.com/#!/dead_lock
> > > http://www.webbase-design.de
> > > http://www.wagner-sebastian.com
> > > seba.wagner@gmail.com
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
>
> --
> WBR
> Maxim aka solomax
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by Maxim Solodovnik <so...@gmail.com>.
Open Files tab
drag your video to the whiteboard
On Thu, Aug 9, 2012 at 9:04 PM, Dimitri Yioulos <dy...@onpointfc.com>wrote:
> "You might have to goto the file explorer and load it from there to the
> whiteboard."
>
> Er, how do I do that?
>
> Dimitri
>
>
> On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.com wrote:
> > * it never appears in the whiteboard.*
> > => but it is in the file explorer itself? Maybe just the checkbox on the
> > bottom of the upload window is not working correctly for video files. You
> > might have to goto the file explorer and load it from there to the
> > whiteboard.
> >
> > Sebastian
> >
> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> >
> > > Spoke too soon (will I never learn). When I try to upload my avi (and,
> > > it does
> > > play in VLC), the UI dialog box shows that it's uploaded and converted.
> > > However, it never appears in the whiteboard. And, there are no errors.
> > >
> > > Ideas?
> > >
> > > Dimitri
> > >
> > > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> > > > Sebastian,
> > > >
> > > > Well, I'm embarrassed. The avi I tired did not, in fact, work with
> > > > VLC.
> > >
> > > I
> > >
> > > > found another test avi, and it uploaded in OM just fine.
> > > >
> > > > Apologies for the noise.
> > > >
> > > > Dimitri
> > > >
> > > > On Thursday 09 August 2012 9:00:16 am seba.wagner@gmail.com wrote:
> > > > > Does the file:
> > > > > /usr/local/openmeetings/
> > > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > > exist?
> > > > > Can you download and watch it using VLC-Player or any other Video
> > >
> > > player?
> > >
> > > > > Sebastian
> > > > >
> > > > >
> > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > >
> > > > > > Sebastian,
> > > > > >
> > > > > > This is all the output from the UI:
> > > > > >
> > > > > > Name: out
> > > > > > Value:
> > > > > > Name: exitValue
> > > > > > Value: 1
> > > > > > Name: command
> > > > > > Value:
> > > > > > [/usr/bin/ffmpeg, -i,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >
> > > > > >V_ 6.flv, -vcodec,
> > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > 256x240,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >
> > > > > >V_ 6.jpg] Name: error
> > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the
> > > > > > FFmpeg developers
> > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat
> > > > > > 4.4.6-4)
> > > > > >
> > > > > > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > > > > > --enable-pthreads --enable-avfilter --prefix=/usr
> > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >
> > > > > >V_ 6.flv: Invalid data found when processing input
> > > > > >
> > > > > > Name: process
> > > > > > Value: previewUpload ID :: 6
> > > > > > Name: exitValue
> > > > > > Value: 0
> > > > > > Name: command
> > > > > > Value:
> > > > > > Name: completeName
> > > > > > Value:
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a65a
> > >
> > > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > > Value:
> > > > > > Name: fileExplorerItemId
> > > > > > Value: 6
> > > > > > Name: process
> > > > > > Value:
> > > > > >
> > > > > > Dimitri
> > > > > >
> > > > > > On Thursday 09 August 2012 8:45:06 am seba.wagner@gmail.comwrote:
> > > > > > > *I just copied what appeared in the OM instance*
> > > > > > > => I donn't think so. Did you scroll or do "ctrl-a" before you
> > >
> > > copied
> > >
> > > > > > > the content?
> > > > > > >
> > > > > > > The error message in the UI should be sufficient. No need to
> > > > > > > search for anything in the logs at this point.
> > > > > > >
> > > > > > > Sebastian
> > > > > > >
> > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > >
> > > > > > > > Hi, Sebastian.
> > > > > > > >
> > > > > > > > I just copied what appeared in the OM instance on my desktop
> > >
> > > when I
> > >
> > > > > > tried
> > > > > >
> > > > > > > > to
> > > > > > > > upload the avi. Error.log in the OM log directory is empty.
> > >
> > > Would
> > >
> > > > > > > > I find the
> > > > > > > > output in red5.log or openmeetings.log? What would I grep
> on?
> > > > > > > >
> > > > > > > > Thanks.
> > > > > > > >
> > > > > > > > Dimitri
> > > > > > > >
> > > > > > > > On Thursday 09 August 2012 8:26:48 am
> seba.wagner@gmail.comwrote:
> > > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > > The conversation log error is much longer. You just copied
> > > > > > > > > the final
> > > > > > > >
> > > > > > > > lines
> > > > > > > >
> > > > > > > > > that convert a screenshot for the preview of the video.
> > > > > > > > > The actual error already happened before when the video was
> > > > > > > > > converted to
> > > > > > > >
> > > > > > > > a
> > > > > > > >
> > > > > > > > > FLV, the FLV is either broken or was never successfully
> > > > > > > > > created from the given file.
> > > > > > > > >
> > > > > > > > > Sebastian
> > > > > > > > >
> > > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > > >
> > > > > > > > > > Good morning (or afternoon, as the case may be), all.
> > > > > > > > > >
> > > > > > > > > > Just a brief aside: after setting up OM 2.0, with the
> help
> > > > > > > > > > of
> > > > > >
> > > > > > Maxim,
> > > > > >
> > > > > > > > > > Alexei, and
> > > > > > > > > > others, I completely blew up the VM it was loaded on. It
> > > > > > > > > > was my non-OM mistake
> > > > > > > > > > (yup, I make 'em), and was unrecoverable (hadn't backed
> up
> > >
> > > the
> > >
> > > > > > > > > > VM, either. Arrgh.). So I created a new VM, and added OM
> > >
> > > 2.0.
> > >
> > > > > > > > > > It was your kind and spot-on answers to my previous
> > > > > > > > > > questions that allowed me to
> > > > > > > >
> > > > > > > > get
> > > > > > > >
> > > > > > > > > > my install working properly. Again, my heartfelt thanks.
> > > > > > > > > >
> > > > > > > > > > Now, to a new question. I've tried to upload and stream
> a
> > > > > > > > > > small
> > > > > >
> > > > > > test
> > > > > >
> > > > > > > > > > avi. But,
> > > > > > > > > > the upload fails, with this output:
> > > > > > > > > >
> > > > > > > > > > Name: out
> > > > > > > > > > Value:
> > > > > > > > > > Name: exitValue
> > > > > > > > > > Value: 1
> > > > > > > > > > Name: command
> > > > > > > > > > Value:
> > > > > > > > > > [/usr/bin/ffmpeg, -i,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >
> > > > > >V_
> > > > > >
> > > > > > > > > >5.flv, -vcodec,
> > > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > > 256x240,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >
> > > > > >V_
> > > > > >
> > > > > > > > > >5.jpg] Name: error
> > > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011
> > > > > > > > > > the
> > > > > >
> > > > > > FFmpeg
> > > > > >
> > > > > > > > > > developers
> > > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305
> > > > > > > > > > (Red Hat
> > > > > > > >
> > > > > > > > 4.4.6-4)
> > > > > > > >
> > > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> > >
> > > --prefix=/usr
> > >
> > > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >
> > > > > >V_
> > > > > >
> > > > > > > > > >5.flv: Invalid data found when processing input
> > > > > > > > > >
> > > > > > > > > > Name: process
> > > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > > Name: exitValue
> > > > > > > > > > Value: 0
> > > > > > > > > > Name: command
> > > > > > > > > > Value:
> > > > > > > > > > Name: completeName
> > > > > > > > > > Value:
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f21
> > >
> > > > > >36
> > > > > >
> > > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > > Value:
> > > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > > Value: 5
> > > > > > > > > > Name: process
> > > > > > > > > > Value:
> > > > > > > > > >
> > > > > > > > > > I'm unable to interpret this output. Your assistance in
> > > > > > > > > > solving would
> > > > > > > >
> > > > > > > > be
> > > > > > > >
> > > > > > > > > > appreciated, as ever.
> > > > > > > > > >
> > > > > > > > > > Dimitri
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > > believed to be clean.
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Sebastian Wagner
> > > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > > http://www.webbase-design.de
> > > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > > seba.wagner@gmail.com
> > > > > > > >
> > > > > > > > --
> > > > > > > > This message has been scanned for viruses and
> > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > believed to be clean.
> > > > > > >
> > > > > > > --
> > > > > > > Sebastian Wagner
> > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > http://www.webbase-design.de
> > > > > > > http://www.wagner-sebastian.com
> > > > > > > seba.wagner@gmail.com
> > > > > >
> > > > > > --
> > > > > > This message has been scanned for viruses and
> > > > > > dangerous content by MailScanner, and is
> > > > > > believed to be clean.
> > > > >
> > > > > --
> > > > > Sebastian Wagner
> > > > > https://twitter.com/#!/dead_lock
> > > > > http://www.webbase-design.de
> > > > > http://www.wagner-sebastian.com
> > > > > seba.wagner@gmail.com
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> >
> > --
> > Sebastian Wagner
> > https://twitter.com/#!/dead_lock
> > http://www.webbase-design.de
> > http://www.wagner-sebastian.com
> > seba.wagner@gmail.com
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
WBR
Maxim aka solomax
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
"You might have to goto the file explorer and load it from there to the
whiteboard."
Er, how do I do that?
Dimitri
On Thursday 09 August 2012 9:58:54 am seba.wagner@gmail.com wrote:
> * it never appears in the whiteboard.*
> => but it is in the file explorer itself? Maybe just the checkbox on the
> bottom of the upload window is not working correctly for video files. You
> might have to goto the file explorer and load it from there to the
> whiteboard.
>
> Sebastian
>
> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>
> > Spoke too soon (will I never learn). When I try to upload my avi (and,
> > it does
> > play in VLC), the UI dialog box shows that it's uploaded and converted.
> > However, it never appears in the whiteboard. And, there are no errors.
> >
> > Ideas?
> >
> > Dimitri
> >
> > On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> > > Sebastian,
> > >
> > > Well, I'm embarrassed. The avi I tired did not, in fact, work with
> > > VLC.
> >
> > I
> >
> > > found another test avi, and it uploaded in OM just fine.
> > >
> > > Apologies for the noise.
> > >
> > > Dimitri
> > >
> > > On Thursday 09 August 2012 9:00:16 am seba.wagner@gmail.com wrote:
> > > > Does the file:
> > > > /usr/local/openmeetings/
> > > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > > exist?
> > > > Can you download and watch it using VLC-Player or any other Video
> >
> > player?
> >
> > > > Sebastian
> > > >
> > > >
> > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > >
> > > > > Sebastian,
> > > > >
> > > > > This is all the output from the UI:
> > > > >
> > > > > Name: out
> > > > > Value:
> > > > > Name: exitValue
> > > > > Value: 1
> > > > > Name: command
> > > > > Value:
> > > > > [/usr/bin/ffmpeg, -i,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> >
> > > > >V_ 6.flv, -vcodec,
> > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > 256x240,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> >
> > > > >V_ 6.jpg] Name: error
> > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the
> > > > > FFmpeg developers
> > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat
> > > > > 4.4.6-4)
> > > > >
> > > > > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > > > > --enable-pthreads --enable-avfilter --prefix=/usr
> > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> >
> > > > >V_ 6.flv: Invalid data found when processing input
> > > > >
> > > > > Name: process
> > > > > Value: previewUpload ID :: 6
> > > > > Name: exitValue
> > > > > Value: 0
> > > > > Name: command
> > > > > Value:
> > > > > Name: completeName
> > > > > Value:
> >
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a65a
> >
> > > > >80 f944b5c3b49448a3bad68 Name: error
> > > > > Value:
> > > > > Name: fileExplorerItemId
> > > > > Value: 6
> > > > > Name: process
> > > > > Value:
> > > > >
> > > > > Dimitri
> > > > >
> > > > > On Thursday 09 August 2012 8:45:06 am seba.wagner@gmail.com wrote:
> > > > > > *I just copied what appeared in the OM instance*
> > > > > > => I donn't think so. Did you scroll or do "ctrl-a" before you
> >
> > copied
> >
> > > > > > the content?
> > > > > >
> > > > > > The error message in the UI should be sufficient. No need to
> > > > > > search for anything in the logs at this point.
> > > > > >
> > > > > > Sebastian
> > > > > >
> > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > >
> > > > > > > Hi, Sebastian.
> > > > > > >
> > > > > > > I just copied what appeared in the OM instance on my desktop
> >
> > when I
> >
> > > > > tried
> > > > >
> > > > > > > to
> > > > > > > upload the avi. Error.log in the OM log directory is empty.
> >
> > Would
> >
> > > > > > > I find the
> > > > > > > output in red5.log or openmeetings.log? What would I grep on?
> > > > > > >
> > > > > > > Thanks.
> > > > > > >
> > > > > > > Dimitri
> > > > > > >
> > > > > > > On Thursday 09 August 2012 8:26:48 am seba.wagner@gmail.comwrote:
> > > > > > > > I don' think you've copied the whole error log.
> > > > > > > > The conversation log error is much longer. You just copied
> > > > > > > > the final
> > > > > > >
> > > > > > > lines
> > > > > > >
> > > > > > > > that convert a screenshot for the preview of the video.
> > > > > > > > The actual error already happened before when the video was
> > > > > > > > converted to
> > > > > > >
> > > > > > > a
> > > > > > >
> > > > > > > > FLV, the FLV is either broken or was never successfully
> > > > > > > > created from the given file.
> > > > > > > >
> > > > > > > > Sebastian
> > > > > > > >
> > > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > > >
> > > > > > > > > Good morning (or afternoon, as the case may be), all.
> > > > > > > > >
> > > > > > > > > Just a brief aside: after setting up OM 2.0, with the help
> > > > > > > > > of
> > > > >
> > > > > Maxim,
> > > > >
> > > > > > > > > Alexei, and
> > > > > > > > > others, I completely blew up the VM it was loaded on. It
> > > > > > > > > was my non-OM mistake
> > > > > > > > > (yup, I make 'em), and was unrecoverable (hadn't backed up
> >
> > the
> >
> > > > > > > > > VM, either. Arrgh.). So I created a new VM, and added OM
> >
> > 2.0.
> >
> > > > > > > > > It was your kind and spot-on answers to my previous
> > > > > > > > > questions that allowed me to
> > > > > > >
> > > > > > > get
> > > > > > >
> > > > > > > > > my install working properly. Again, my heartfelt thanks.
> > > > > > > > >
> > > > > > > > > Now, to a new question. I've tried to upload and stream a
> > > > > > > > > small
> > > > >
> > > > > test
> > > > >
> > > > > > > > > avi. But,
> > > > > > > > > the upload fails, with this output:
> > > > > > > > >
> > > > > > > > > Name: out
> > > > > > > > > Value:
> > > > > > > > > Name: exitValue
> > > > > > > > > Value: 1
> > > > > > > > > Name: command
> > > > > > > > > Value:
> > > > > > > > > [/usr/bin/ffmpeg, -i,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> >
> > > > >V_
> > > > >
> > > > > > > > >5.flv, -vcodec,
> > > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > > 256x240,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> >
> > > > >V_
> > > > >
> > > > > > > > >5.jpg] Name: error
> > > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011
> > > > > > > > > the
> > > > >
> > > > > FFmpeg
> > > > >
> > > > > > > > > developers
> > > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305
> > > > > > > > > (Red Hat
> > > > > > >
> > > > > > > 4.4.6-4)
> > > > > > >
> > > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> >
> > --prefix=/usr
> >
> > > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> >
> > > > >V_
> > > > >
> > > > > > > > >5.flv: Invalid data found when processing input
> > > > > > > > >
> > > > > > > > > Name: process
> > > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > > Name: exitValue
> > > > > > > > > Value: 0
> > > > > > > > > Name: command
> > > > > > > > > Value:
> > > > > > > > > Name: completeName
> > > > > > > > > Value:
> >
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f21
> >
> > > > >36
> > > > >
> > > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > > Value:
> > > > > > > > > Name: fileExplorerItemId
> > > > > > > > > Value: 5
> > > > > > > > > Name: process
> > > > > > > > > Value:
> > > > > > > > >
> > > > > > > > > I'm unable to interpret this output. Your assistance in
> > > > > > > > > solving would
> > > > > > >
> > > > > > > be
> > > > > > >
> > > > > > > > > appreciated, as ever.
> > > > > > > > >
> > > > > > > > > Dimitri
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > This message has been scanned for viruses and
> > > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > > believed to be clean.
> > > > > > > >
> > > > > > > > --
> > > > > > > > Sebastian Wagner
> > > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > > http://www.webbase-design.de
> > > > > > > > http://www.wagner-sebastian.com
> > > > > > > > seba.wagner@gmail.com
> > > > > > >
> > > > > > > --
> > > > > > > This message has been scanned for viruses and
> > > > > > > dangerous content by MailScanner, and is
> > > > > > > believed to be clean.
> > > > > >
> > > > > > --
> > > > > > Sebastian Wagner
> > > > > > https://twitter.com/#!/dead_lock
> > > > > > http://www.webbase-design.de
> > > > > > http://www.wagner-sebastian.com
> > > > > > seba.wagner@gmail.com
> > > > >
> > > > > --
> > > > > This message has been scanned for viruses and
> > > > > dangerous content by MailScanner, and is
> > > > > believed to be clean.
> > > >
> > > > --
> > > > Sebastian Wagner
> > > > https://twitter.com/#!/dead_lock
> > > > http://www.webbase-design.de
> > > > http://www.wagner-sebastian.com
> > > > seba.wagner@gmail.com
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wagner@gmail.com
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by "seba.wagner@gmail.com" <se...@gmail.com>.
* it never appears in the whiteboard.*
=> but it is in the file explorer itself? Maybe just the checkbox on the
bottom of the upload window is not working correctly for video files. You
might have to goto the file explorer and load it from there to the
whiteboard.
Sebastian
2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> Spoke too soon (will I never learn). When I try to upload my avi (and, it
> does
> play in VLC), the UI dialog box shows that it's uploaded and converted.
> However, it never appears in the whiteboard. And, there are no errors.
>
> Ideas?
>
> Dimitri
>
>
> On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> > Sebastian,
> >
> > Well, I'm embarrassed. The avi I tired did not, in fact, work with VLC.
> I
> > found another test avi, and it uploaded in OM just fine.
> >
> > Apologies for the noise.
> >
> > Dimitri
> >
> > On Thursday 09 August 2012 9:00:16 am seba.wagner@gmail.com wrote:
> > > Does the file:
> > > /usr/local/openmeetings/
> > > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > > exist?
> > > Can you download and watch it using VLC-Player or any other Video
> player?
> > >
> > > Sebastian
> > >
> > >
> > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > >
> > > > Sebastian,
> > > >
> > > > This is all the output from the UI:
> > > >
> > > > Name: out
> > > > Value:
> > > > Name: exitValue
> > > > Value: 1
> > > > Name: command
> > > > Value:
> > > > [/usr/bin/ffmpeg, -i,
> > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > > >V_ 6.flv, -vcodec,
> > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > 256x240,
> > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > > >V_ 6.jpg] Name: error
> > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg
> > > > developers
> > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat
> > > > 4.4.6-4)
> > > >
> > > > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > > > --enable-pthreads --enable-avfilter --prefix=/usr
> > > > libavutil 50.36. 0 / 50.36. 0
> > > > libavcore 0.16. 1 / 0.16. 1
> > > > libavcodec 52.108. 0 / 52.108. 0
> > > > libavformat 52.93. 0 / 52.93. 0
> > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > libavfilter 1.74. 0 / 1.74. 0
> > > > libswscale 0.12. 0 / 0.12. 0
> > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > >
> > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > > >V_ 6.flv: Invalid data found when processing input
> > > >
> > > > Name: process
> > > > Value: previewUpload ID :: 6
> > > > Name: exitValue
> > > > Value: 0
> > > > Name: command
> > > > Value:
> > > > Name: completeName
> > > > Value:
> > > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a65a
> > > >80 f944b5c3b49448a3bad68 Name: error
> > > > Value:
> > > > Name: fileExplorerItemId
> > > > Value: 6
> > > > Name: process
> > > > Value:
> > > >
> > > > Dimitri
> > > >
> > > > On Thursday 09 August 2012 8:45:06 am seba.wagner@gmail.com wrote:
> > > > > *I just copied what appeared in the OM instance*
> > > > > => I donn't think so. Did you scroll or do "ctrl-a" before you
> copied
> > > > > the content?
> > > > >
> > > > > The error message in the UI should be sufficient. No need to search
> > > > > for anything in the logs at this point.
> > > > >
> > > > > Sebastian
> > > > >
> > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > >
> > > > > > Hi, Sebastian.
> > > > > >
> > > > > > I just copied what appeared in the OM instance on my desktop
> when I
> > > >
> > > > tried
> > > >
> > > > > > to
> > > > > > upload the avi. Error.log in the OM log directory is empty.
> Would
> > > > > > I find the
> > > > > > output in red5.log or openmeetings.log? What would I grep on?
> > > > > >
> > > > > > Thanks.
> > > > > >
> > > > > > Dimitri
> > > > > >
> > > > > > On Thursday 09 August 2012 8:26:48 am seba.wagner@gmail.comwrote:
> > > > > > > I don' think you've copied the whole error log.
> > > > > > > The conversation log error is much longer. You just copied the
> > > > > > > final
> > > > > >
> > > > > > lines
> > > > > >
> > > > > > > that convert a screenshot for the preview of the video.
> > > > > > > The actual error already happened before when the video was
> > > > > > > converted to
> > > > > >
> > > > > > a
> > > > > >
> > > > > > > FLV, the FLV is either broken or was never successfully created
> > > > > > > from the given file.
> > > > > > >
> > > > > > > Sebastian
> > > > > > >
> > > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > > >
> > > > > > > > Good morning (or afternoon, as the case may be), all.
> > > > > > > >
> > > > > > > > Just a brief aside: after setting up OM 2.0, with the help of
> > > >
> > > > Maxim,
> > > >
> > > > > > > > Alexei, and
> > > > > > > > others, I completely blew up the VM it was loaded on. It was
> > > > > > > > my non-OM mistake
> > > > > > > > (yup, I make 'em), and was unrecoverable (hadn't backed up
> the
> > > > > > > > VM, either. Arrgh.). So I created a new VM, and added OM
> 2.0.
> > > > > > > > It was your kind and spot-on answers to my previous questions
> > > > > > > > that allowed me to
> > > > > >
> > > > > > get
> > > > > >
> > > > > > > > my install working properly. Again, my heartfelt thanks.
> > > > > > > >
> > > > > > > > Now, to a new question. I've tried to upload and stream a
> > > > > > > > small
> > > >
> > > > test
> > > >
> > > > > > > > avi. But,
> > > > > > > > the upload fails, with this output:
> > > > > > > >
> > > > > > > > Name: out
> > > > > > > > Value:
> > > > > > > > Name: exitValue
> > > > > > > > Value: 1
> > > > > > > > Name: command
> > > > > > > > Value:
> > > > > > > > [/usr/bin/ffmpeg, -i,
> > > >
> > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > > >V_
> > > >
> > > > > > > >5.flv, -vcodec,
> > > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > > 256x240,
> > > >
> > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > > >V_
> > > >
> > > > > > > >5.jpg] Name: error
> > > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the
> > > >
> > > > FFmpeg
> > > >
> > > > > > > > developers
> > > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red
> > > > > > > > Hat
> > > > > >
> > > > > > 4.4.6-4)
> > > > > >
> > > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > > --enable-gpl --enable-pthreads --enable-avfilter
> --prefix=/usr
> > > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > > >
> > > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > > >V_
> > > >
> > > > > > > >5.flv: Invalid data found when processing input
> > > > > > > >
> > > > > > > > Name: process
> > > > > > > > Value: previewUpload ID :: 5
> > > > > > > > Name: exitValue
> > > > > > > > Value: 0
> > > > > > > > Name: command
> > > > > > > > Value:
> > > > > > > > Name: completeName
> > > > > > > > Value:
> > > >
> > > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f21
> > > >36
> > > >
> > > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > > Value:
> > > > > > > > Name: fileExplorerItemId
> > > > > > > > Value: 5
> > > > > > > > Name: process
> > > > > > > > Value:
> > > > > > > >
> > > > > > > > I'm unable to interpret this output. Your assistance in
> > > > > > > > solving would
> > > > > >
> > > > > > be
> > > > > >
> > > > > > > > appreciated, as ever.
> > > > > > > >
> > > > > > > > Dimitri
> > > > > > > >
> > > > > > > > --
> > > > > > > > This message has been scanned for viruses and
> > > > > > > > dangerous content by MailScanner, and is
> > > > > > > > believed to be clean.
> > > > > > >
> > > > > > > --
> > > > > > > Sebastian Wagner
> > > > > > > https://twitter.com/#!/dead_lock
> > > > > > > http://www.webbase-design.de
> > > > > > > http://www.wagner-sebastian.com
> > > > > > > seba.wagner@gmail.com
> > > > > >
> > > > > > --
> > > > > > This message has been scanned for viruses and
> > > > > > dangerous content by MailScanner, and is
> > > > > > believed to be clean.
> > > > >
> > > > > --
> > > > > Sebastian Wagner
> > > > > https://twitter.com/#!/dead_lock
> > > > > http://www.webbase-design.de
> > > > > http://www.wagner-sebastian.com
> > > > > seba.wagner@gmail.com
> > > >
> > > > --
> > > > This message has been scanned for viruses and
> > > > dangerous content by MailScanner, and is
> > > > believed to be clean.
> > >
> > > --
> > > Sebastian Wagner
> > > https://twitter.com/#!/dead_lock
> > > http://www.webbase-design.de
> > > http://www.wagner-sebastian.com
> > > seba.wagner@gmail.com
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
Sebastian Wagner
https://twitter.com/#!/dead_lock
http://www.webbase-design.de
http://www.wagner-sebastian.com
seba.wagner@gmail.com
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
Spoke too soon (will I never learn). When I try to upload my avi (and, it does
play in VLC), the UI dialog box shows that it's uploaded and converted.
However, it never appears in the whiteboard. And, there are no errors.
Ideas?
Dimitri
On Thursday 09 August 2012 9:09:54 am Dimitri Yioulos wrote:
> Sebastian,
>
> Well, I'm embarrassed. The avi I tired did not, in fact, work with VLC. I
> found another test avi, and it uploaded in OM just fine.
>
> Apologies for the noise.
>
> Dimitri
>
> On Thursday 09 August 2012 9:00:16 am seba.wagner@gmail.com wrote:
> > Does the file:
> > /usr/local/openmeetings/
> > webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> > exist?
> > Can you download and watch it using VLC-Player or any other Video player?
> >
> > Sebastian
> >
> >
> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> >
> > > Sebastian,
> > >
> > > This is all the output from the UI:
> > >
> > > Name: out
> > > Value:
> > > Name: exitValue
> > > Value: 1
> > > Name: command
> > > Value:
> > > [/usr/bin/ffmpeg, -i,
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >V_ 6.flv, -vcodec,
> > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > 256x240,
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >V_ 6.jpg] Name: error
> > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg
> > > developers
> > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat
> > > 4.4.6-4)
> > >
> > > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > > --enable-pthreads --enable-avfilter --prefix=/usr
> > > libavutil 50.36. 0 / 50.36. 0
> > > libavcore 0.16. 1 / 0.16. 1
> > > libavcodec 52.108. 0 / 52.108. 0
> > > libavformat 52.93. 0 / 52.93. 0
> > > libavdevice 52. 2. 3 / 52. 2. 3
> > > libavfilter 1.74. 0 / 1.74. 0
> > > libswscale 0.12. 0 / 0.12. 0
> > > libpostproc 51. 2. 0 / 51. 2. 0
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >V_ 6.flv: Invalid data found when processing input
> > >
> > > Name: process
> > > Value: previewUpload ID :: 6
> > > Name: exitValue
> > > Value: 0
> > > Name: command
> > > Value:
> > > Name: completeName
> > > Value:
> > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a65a
> > >80 f944b5c3b49448a3bad68 Name: error
> > > Value:
> > > Name: fileExplorerItemId
> > > Value: 6
> > > Name: process
> > > Value:
> > >
> > > Dimitri
> > >
> > > On Thursday 09 August 2012 8:45:06 am seba.wagner@gmail.com wrote:
> > > > *I just copied what appeared in the OM instance*
> > > > => I donn't think so. Did you scroll or do "ctrl-a" before you copied
> > > > the content?
> > > >
> > > > The error message in the UI should be sufficient. No need to search
> > > > for anything in the logs at this point.
> > > >
> > > > Sebastian
> > > >
> > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > >
> > > > > Hi, Sebastian.
> > > > >
> > > > > I just copied what appeared in the OM instance on my desktop when I
> > >
> > > tried
> > >
> > > > > to
> > > > > upload the avi. Error.log in the OM log directory is empty. Would
> > > > > I find the
> > > > > output in red5.log or openmeetings.log? What would I grep on?
> > > > >
> > > > > Thanks.
> > > > >
> > > > > Dimitri
> > > > >
> > > > > On Thursday 09 August 2012 8:26:48 am seba.wagner@gmail.com wrote:
> > > > > > I don' think you've copied the whole error log.
> > > > > > The conversation log error is much longer. You just copied the
> > > > > > final
> > > > >
> > > > > lines
> > > > >
> > > > > > that convert a screenshot for the preview of the video.
> > > > > > The actual error already happened before when the video was
> > > > > > converted to
> > > > >
> > > > > a
> > > > >
> > > > > > FLV, the FLV is either broken or was never successfully created
> > > > > > from the given file.
> > > > > >
> > > > > > Sebastian
> > > > > >
> > > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > > >
> > > > > > > Good morning (or afternoon, as the case may be), all.
> > > > > > >
> > > > > > > Just a brief aside: after setting up OM 2.0, with the help of
> > >
> > > Maxim,
> > >
> > > > > > > Alexei, and
> > > > > > > others, I completely blew up the VM it was loaded on. It was
> > > > > > > my non-OM mistake
> > > > > > > (yup, I make 'em), and was unrecoverable (hadn't backed up the
> > > > > > > VM, either. Arrgh.). So I created a new VM, and added OM 2.0.
> > > > > > > It was your kind and spot-on answers to my previous questions
> > > > > > > that allowed me to
> > > > >
> > > > > get
> > > > >
> > > > > > > my install working properly. Again, my heartfelt thanks.
> > > > > > >
> > > > > > > Now, to a new question. I've tried to upload and stream a
> > > > > > > small
> > >
> > > test
> > >
> > > > > > > avi. But,
> > > > > > > the upload fails, with this output:
> > > > > > >
> > > > > > > Name: out
> > > > > > > Value:
> > > > > > > Name: exitValue
> > > > > > > Value: 1
> > > > > > > Name: command
> > > > > > > Value:
> > > > > > > [/usr/bin/ffmpeg, -i,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >V_
> > >
> > > > > > >5.flv, -vcodec,
> > > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > > 256x240,
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >V_
> > >
> > > > > > >5.jpg] Name: error
> > > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the
> > >
> > > FFmpeg
> > >
> > > > > > > developers
> > > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red
> > > > > > > Hat
> > > > >
> > > > > 4.4.6-4)
> > > > >
> > > > > > > configuration: --enable-libmp3lame --enable-postproc
> > > > > > > --enable-gpl --enable-pthreads --enable-avfilter --prefix=/usr
> > > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFL
> > >V_
> > >
> > > > > > >5.flv: Invalid data found when processing input
> > > > > > >
> > > > > > > Name: process
> > > > > > > Value: previewUpload ID :: 5
> > > > > > > Name: exitValue
> > > > > > > Value: 0
> > > > > > > Name: command
> > > > > > > Value:
> > > > > > > Name: completeName
> > > > > > > Value:
> > >
> > > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f21
> > >36
> > >
> > > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > > Value:
> > > > > > > Name: fileExplorerItemId
> > > > > > > Value: 5
> > > > > > > Name: process
> > > > > > > Value:
> > > > > > >
> > > > > > > I'm unable to interpret this output. Your assistance in
> > > > > > > solving would
> > > > >
> > > > > be
> > > > >
> > > > > > > appreciated, as ever.
> > > > > > >
> > > > > > > Dimitri
> > > > > > >
> > > > > > > --
> > > > > > > This message has been scanned for viruses and
> > > > > > > dangerous content by MailScanner, and is
> > > > > > > believed to be clean.
> > > > > >
> > > > > > --
> > > > > > Sebastian Wagner
> > > > > > https://twitter.com/#!/dead_lock
> > > > > > http://www.webbase-design.de
> > > > > > http://www.wagner-sebastian.com
> > > > > > seba.wagner@gmail.com
> > > > >
> > > > > --
> > > > > This message has been scanned for viruses and
> > > > > dangerous content by MailScanner, and is
> > > > > believed to be clean.
> > > >
> > > > --
> > > > Sebastian Wagner
> > > > https://twitter.com/#!/dead_lock
> > > > http://www.webbase-design.de
> > > > http://www.wagner-sebastian.com
> > > > seba.wagner@gmail.com
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> >
> > --
> > Sebastian Wagner
> > https://twitter.com/#!/dead_lock
> > http://www.webbase-design.de
> > http://www.wagner-sebastian.com
> > seba.wagner@gmail.com
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
Sebastian,
Well, I'm embarrassed. The avi I tired did not, in fact, work with VLC. I
found another test avi, and it uploaded in OM just fine.
Apologies for the noise.
Dimitri
On Thursday 09 August 2012 9:00:16 am seba.wagner@gmail.com wrote:
> Does the file:
> /usr/local/openmeetings/
> webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
> exist?
> Can you download and watch it using VLC-Player or any other Video player?
>
> Sebastian
>
>
> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>
> > Sebastian,
> >
> > This is all the output from the UI:
> >
> > Name: out
> > Value:
> > Name: exitValue
> > Value: 1
> > Name: command
> > Value:
> > [/usr/bin/ffmpeg, -i,
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >6.flv, -vcodec,
> > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > 256x240,
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >6.jpg] Name: error
> > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg
> > developers
> > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat 4.4.6-4)
> >
> > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > --enable-pthreads --enable-avfilter --prefix=/usr
> > libavutil 50.36. 0 / 50.36. 0
> > libavcore 0.16. 1 / 0.16. 1
> > libavcodec 52.108. 0 / 52.108. 0
> > libavformat 52.93. 0 / 52.93. 0
> > libavdevice 52. 2. 3 / 52. 2. 3
> > libavfilter 1.74. 0 / 1.74. 0
> > libswscale 0.12. 0 / 0.12. 0
> > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >6.flv: Invalid data found when processing input
> >
> > Name: process
> > Value: previewUpload ID :: 6
> > Name: exitValue
> > Value: 0
> > Name: command
> > Value:
> > Name: completeName
> > Value:
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a65a80
> >f944b5c3b49448a3bad68 Name: error
> > Value:
> > Name: fileExplorerItemId
> > Value: 6
> > Name: process
> > Value:
> >
> > Dimitri
> >
> > On Thursday 09 August 2012 8:45:06 am seba.wagner@gmail.com wrote:
> > > *I just copied what appeared in the OM instance*
> > > => I donn't think so. Did you scroll or do "ctrl-a" before you copied
> > > the content?
> > >
> > > The error message in the UI should be sufficient. No need to search for
> > > anything in the logs at this point.
> > >
> > > Sebastian
> > >
> > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > >
> > > > Hi, Sebastian.
> > > >
> > > > I just copied what appeared in the OM instance on my desktop when I
> >
> > tried
> >
> > > > to
> > > > upload the avi. Error.log in the OM log directory is empty. Would I
> > > > find the
> > > > output in red5.log or openmeetings.log? What would I grep on?
> > > >
> > > > Thanks.
> > > >
> > > > Dimitri
> > > >
> > > > On Thursday 09 August 2012 8:26:48 am seba.wagner@gmail.com wrote:
> > > > > I don' think you've copied the whole error log.
> > > > > The conversation log error is much longer. You just copied the
> > > > > final
> > > >
> > > > lines
> > > >
> > > > > that convert a screenshot for the preview of the video.
> > > > > The actual error already happened before when the video was
> > > > > converted to
> > > >
> > > > a
> > > >
> > > > > FLV, the FLV is either broken or was never successfully created
> > > > > from the given file.
> > > > >
> > > > > Sebastian
> > > > >
> > > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > > >
> > > > > > Good morning (or afternoon, as the case may be), all.
> > > > > >
> > > > > > Just a brief aside: after setting up OM 2.0, with the help of
> >
> > Maxim,
> >
> > > > > > Alexei, and
> > > > > > others, I completely blew up the VM it was loaded on. It was my
> > > > > > non-OM mistake
> > > > > > (yup, I make 'em), and was unrecoverable (hadn't backed up the
> > > > > > VM, either. Arrgh.). So I created a new VM, and added OM 2.0.
> > > > > > It was your kind and spot-on answers to my previous questions
> > > > > > that allowed me to
> > > >
> > > > get
> > > >
> > > > > > my install working properly. Again, my heartfelt thanks.
> > > > > >
> > > > > > Now, to a new question. I've tried to upload and stream a small
> >
> > test
> >
> > > > > > avi. But,
> > > > > > the upload fails, with this output:
> > > > > >
> > > > > > Name: out
> > > > > > Value:
> > > > > > Name: exitValue
> > > > > > Value: 1
> > > > > > Name: command
> > > > > > Value:
> > > > > > [/usr/bin/ffmpeg, -i,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >
> > > > > >5.flv, -vcodec,
> > > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > > 256x240,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >
> > > > > >5.jpg] Name: error
> > > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the
> >
> > FFmpeg
> >
> > > > > > developers
> > > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat
> > > >
> > > > 4.4.6-4)
> > > >
> > > > > > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > > > > > --enable-pthreads --enable-avfilter --prefix=/usr
> > > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >
> > > > > >5.flv: Invalid data found when processing input
> > > > > >
> > > > > > Name: process
> > > > > > Value: previewUpload ID :: 5
> > > > > > Name: exitValue
> > > > > > Value: 0
> > > > > > Name: command
> > > > > > Value:
> > > > > > Name: completeName
> > > > > > Value:
> >
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f2136
> >
> > > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > > Value:
> > > > > > Name: fileExplorerItemId
> > > > > > Value: 5
> > > > > > Name: process
> > > > > > Value:
> > > > > >
> > > > > > I'm unable to interpret this output. Your assistance in solving
> > > > > > would
> > > >
> > > > be
> > > >
> > > > > > appreciated, as ever.
> > > > > >
> > > > > > Dimitri
> > > > > >
> > > > > > --
> > > > > > This message has been scanned for viruses and
> > > > > > dangerous content by MailScanner, and is
> > > > > > believed to be clean.
> > > > >
> > > > > --
> > > > > Sebastian Wagner
> > > > > https://twitter.com/#!/dead_lock
> > > > > http://www.webbase-design.de
> > > > > http://www.wagner-sebastian.com
> > > > > seba.wagner@gmail.com
> > > >
> > > > --
> > > > This message has been scanned for viruses and
> > > > dangerous content by MailScanner, and is
> > > > believed to be clean.
> > >
> > > --
> > > Sebastian Wagner
> > > https://twitter.com/#!/dead_lock
> > > http://www.webbase-design.de
> > > http://www.wagner-sebastian.com
> > > seba.wagner@gmail.com
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wagner@gmail.com
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by "seba.wagner@gmail.com" <se...@gmail.com>.
Does the file:
/usr/local/openmeetings/
webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv
exist?
Can you download and watch it using VLC-Player or any other Video player?
Sebastian
2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> Sebastian,
>
> This is all the output from the UI:
>
> Name: out
> Value:
> Name: exitValue
> Value: 1
> Name: command
> Value:
> [/usr/bin/ffmpeg, -i,
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv,
> -vcodec,
> mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> 256x240,
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_6.jpg]
> Name: error
> Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg
> developers
> built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat 4.4.6-4)
>
> configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> --enable-pthreads --enable-avfilter --prefix=/usr
> libavutil 50.36. 0 / 50.36. 0
> libavcore 0.16. 1 / 0.16. 1
> libavcodec 52.108. 0 / 52.108. 0
> libavformat 52.93. 0 / 52.93. 0
> libavdevice 52. 2. 3 / 52. 2. 3
> libavfilter 1.74. 0 / 1.74. 0
> libswscale 0.12. 0 / 0.12. 0
> libpostproc 51. 2. 0 / 51. 2. 0
>
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv:
> Invalid data found when processing input
>
> Name: process
> Value: previewUpload ID :: 6
> Name: exitValue
> Value: 0
> Name: command
> Value:
> Name: completeName
> Value:
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a65a80f944b5c3b49448a3bad68
> Name: error
> Value:
> Name: fileExplorerItemId
> Value: 6
> Name: process
> Value:
>
> Dimitri
>
>
> On Thursday 09 August 2012 8:45:06 am seba.wagner@gmail.com wrote:
> > *I just copied what appeared in the OM instance*
> > => I donn't think so. Did you scroll or do "ctrl-a" before you copied the
> > content?
> >
> > The error message in the UI should be sufficient. No need to search for
> > anything in the logs at this point.
> >
> > Sebastian
> >
> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> >
> > > Hi, Sebastian.
> > >
> > > I just copied what appeared in the OM instance on my desktop when I
> tried
> > > to
> > > upload the avi. Error.log in the OM log directory is empty. Would I
> > > find the
> > > output in red5.log or openmeetings.log? What would I grep on?
> > >
> > > Thanks.
> > >
> > > Dimitri
> > >
> > > On Thursday 09 August 2012 8:26:48 am seba.wagner@gmail.com wrote:
> > > > I don' think you've copied the whole error log.
> > > > The conversation log error is much longer. You just copied the final
> > >
> > > lines
> > >
> > > > that convert a screenshot for the preview of the video.
> > > > The actual error already happened before when the video was converted
> > > > to
> > >
> > > a
> > >
> > > > FLV, the FLV is either broken or was never successfully created from
> > > > the given file.
> > > >
> > > > Sebastian
> > > >
> > > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > > >
> > > > > Good morning (or afternoon, as the case may be), all.
> > > > >
> > > > > Just a brief aside: after setting up OM 2.0, with the help of
> Maxim,
> > > > > Alexei, and
> > > > > others, I completely blew up the VM it was loaded on. It was my
> > > > > non-OM mistake
> > > > > (yup, I make 'em), and was unrecoverable (hadn't backed up the VM,
> > > > > either. Arrgh.). So I created a new VM, and added OM 2.0. It was
> > > > > your kind and spot-on answers to my previous questions that allowed
> > > > > me to
> > >
> > > get
> > >
> > > > > my install working properly. Again, my heartfelt thanks.
> > > > >
> > > > > Now, to a new question. I've tried to upload and stream a small
> test
> > > > > avi. But,
> > > > > the upload fails, with this output:
> > > > >
> > > > > Name: out
> > > > > Value:
> > > > > Name: exitValue
> > > > > Value: 1
> > > > > Name: command
> > > > > Value:
> > > > > [/usr/bin/ffmpeg, -i,
> > >
> > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> > >
> > > > >5.flv, -vcodec,
> > > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > > 256x240,
> > >
> > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> > >
> > > > >5.jpg] Name: error
> > > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the
> FFmpeg
> > > > > developers
> > > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat
> > >
> > > 4.4.6-4)
> > >
> > > > > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > > > > --enable-pthreads --enable-avfilter --prefix=/usr
> > > > > libavutil 50.36. 0 / 50.36. 0
> > > > > libavcore 0.16. 1 / 0.16. 1
> > > > > libavcodec 52.108. 0 / 52.108. 0
> > > > > libavformat 52.93. 0 / 52.93. 0
> > > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > > libavfilter 1.74. 0 / 1.74. 0
> > > > > libswscale 0.12. 0 / 0.12. 0
> > > > > libpostproc 51. 2. 0 / 51. 2. 0
> > >
> > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> > >
> > > > >5.flv: Invalid data found when processing input
> > > > >
> > > > > Name: process
> > > > > Value: previewUpload ID :: 5
> > > > > Name: exitValue
> > > > > Value: 0
> > > > > Name: command
> > > > > Value:
> > > > > Name: completeName
> > > > > Value:
> > >
> > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f2136
> > >
> > > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > > Value:
> > > > > Name: fileExplorerItemId
> > > > > Value: 5
> > > > > Name: process
> > > > > Value:
> > > > >
> > > > > I'm unable to interpret this output. Your assistance in solving
> > > > > would
> > >
> > > be
> > >
> > > > > appreciated, as ever.
> > > > >
> > > > > Dimitri
> > > > >
> > > > > --
> > > > > This message has been scanned for viruses and
> > > > > dangerous content by MailScanner, and is
> > > > > believed to be clean.
> > > >
> > > > --
> > > > Sebastian Wagner
> > > > https://twitter.com/#!/dead_lock
> > > > http://www.webbase-design.de
> > > > http://www.wagner-sebastian.com
> > > > seba.wagner@gmail.com
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> >
> > --
> > Sebastian Wagner
> > https://twitter.com/#!/dead_lock
> > http://www.webbase-design.de
> > http://www.wagner-sebastian.com
> > seba.wagner@gmail.com
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
Sebastian Wagner
https://twitter.com/#!/dead_lock
http://www.webbase-design.de
http://www.wagner-sebastian.com
seba.wagner@gmail.com
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
Sebastian,
This is all the output from the UI:
Name: out
Value:
Name: exitValue
Value: 1
Name: command
Value:
[/usr/bin/ffmpeg, -i, /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv, -vcodec,
mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
256x240, /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_6.jpg]
Name: error
Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg developers
built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat 4.4.6-4)
configuration: --enable-libmp3lame --enable-postproc --enable-gpl --enable-pthreads --enable-avfilter --prefix=/usr
libavutil 50.36. 0 / 50.36. 0
libavcore 0.16. 1 / 0.16. 1
libavcodec 52.108. 0 / 52.108. 0
libavformat 52.93. 0 / 52.93. 0
libavdevice 52. 2. 3 / 52. 2. 3
libavfilter 1.74. 0 / 1.74. 0
libswscale 0.12. 0 / 0.12. 0
libpostproc 51. 2. 0 / 51. 2. 0
/usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_6.flv:
Invalid data found when processing input
Name: process
Value: previewUpload ID :: 6
Name: exitValue
Value: 0
Name: command
Value:
Name: completeName
Value: /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/e4069a65a80f944b5c3b49448a3bad68
Name: error
Value:
Name: fileExplorerItemId
Value: 6
Name: process
Value:
Dimitri
On Thursday 09 August 2012 8:45:06 am seba.wagner@gmail.com wrote:
> *I just copied what appeared in the OM instance*
> => I donn't think so. Did you scroll or do "ctrl-a" before you copied the
> content?
>
> The error message in the UI should be sufficient. No need to search for
> anything in the logs at this point.
>
> Sebastian
>
> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>
> > Hi, Sebastian.
> >
> > I just copied what appeared in the OM instance on my desktop when I tried
> > to
> > upload the avi. Error.log in the OM log directory is empty. Would I
> > find the
> > output in red5.log or openmeetings.log? What would I grep on?
> >
> > Thanks.
> >
> > Dimitri
> >
> > On Thursday 09 August 2012 8:26:48 am seba.wagner@gmail.com wrote:
> > > I don' think you've copied the whole error log.
> > > The conversation log error is much longer. You just copied the final
> >
> > lines
> >
> > > that convert a screenshot for the preview of the video.
> > > The actual error already happened before when the video was converted
> > > to
> >
> > a
> >
> > > FLV, the FLV is either broken or was never successfully created from
> > > the given file.
> > >
> > > Sebastian
> > >
> > > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> > >
> > > > Good morning (or afternoon, as the case may be), all.
> > > >
> > > > Just a brief aside: after setting up OM 2.0, with the help of Maxim,
> > > > Alexei, and
> > > > others, I completely blew up the VM it was loaded on. It was my
> > > > non-OM mistake
> > > > (yup, I make 'em), and was unrecoverable (hadn't backed up the VM,
> > > > either. Arrgh.). So I created a new VM, and added OM 2.0. It was
> > > > your kind and spot-on answers to my previous questions that allowed
> > > > me to
> >
> > get
> >
> > > > my install working properly. Again, my heartfelt thanks.
> > > >
> > > > Now, to a new question. I've tried to upload and stream a small test
> > > > avi. But,
> > > > the upload fails, with this output:
> > > >
> > > > Name: out
> > > > Value:
> > > > Name: exitValue
> > > > Value: 1
> > > > Name: command
> > > > Value:
> > > > [/usr/bin/ffmpeg, -i,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >
> > > >5.flv, -vcodec,
> > > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > > 256x240,
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >
> > > >5.jpg] Name: error
> > > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg
> > > > developers
> > > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat
> >
> > 4.4.6-4)
> >
> > > > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > > > --enable-pthreads --enable-avfilter --prefix=/usr
> > > > libavutil 50.36. 0 / 50.36. 0
> > > > libavcore 0.16. 1 / 0.16. 1
> > > > libavcodec 52.108. 0 / 52.108. 0
> > > > libavformat 52.93. 0 / 52.93. 0
> > > > libavdevice 52. 2. 3 / 52. 2. 3
> > > > libavfilter 1.74. 0 / 1.74. 0
> > > > libswscale 0.12. 0 / 0.12. 0
> > > > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >
> > > >5.flv: Invalid data found when processing input
> > > >
> > > > Name: process
> > > > Value: previewUpload ID :: 5
> > > > Name: exitValue
> > > > Value: 0
> > > > Name: command
> > > > Value:
> > > > Name: completeName
> > > > Value:
> >
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f2136
> >
> > > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > > Value:
> > > > Name: fileExplorerItemId
> > > > Value: 5
> > > > Name: process
> > > > Value:
> > > >
> > > > I'm unable to interpret this output. Your assistance in solving
> > > > would
> >
> > be
> >
> > > > appreciated, as ever.
> > > >
> > > > Dimitri
> > > >
> > > > --
> > > > This message has been scanned for viruses and
> > > > dangerous content by MailScanner, and is
> > > > believed to be clean.
> > >
> > > --
> > > Sebastian Wagner
> > > https://twitter.com/#!/dead_lock
> > > http://www.webbase-design.de
> > > http://www.wagner-sebastian.com
> > > seba.wagner@gmail.com
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wagner@gmail.com
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by "seba.wagner@gmail.com" <se...@gmail.com>.
*I just copied what appeared in the OM instance*
=> I donn't think so. Did you scroll or do "ctrl-a" before you copied the
content?
The error message in the UI should be sufficient. No need to search for
anything in the logs at this point.
Sebastian
2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> Hi, Sebastian.
>
> I just copied what appeared in the OM instance on my desktop when I tried
> to
> upload the avi. Error.log in the OM log directory is empty. Would I find
> the
> output in red5.log or openmeetings.log? What would I grep on?
>
> Thanks.
>
> Dimitri
>
>
> On Thursday 09 August 2012 8:26:48 am seba.wagner@gmail.com wrote:
> > I don' think you've copied the whole error log.
> > The conversation log error is much longer. You just copied the final
> lines
> > that convert a screenshot for the preview of the video.
> > The actual error already happened before when the video was converted to
> a
> > FLV, the FLV is either broken or was never successfully created from the
> > given file.
> >
> > Sebastian
> >
> > 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> >
> > > Good morning (or afternoon, as the case may be), all.
> > >
> > > Just a brief aside: after setting up OM 2.0, with the help of Maxim,
> > > Alexei, and
> > > others, I completely blew up the VM it was loaded on. It was my non-OM
> > > mistake
> > > (yup, I make 'em), and was unrecoverable (hadn't backed up the VM,
> > > either. Arrgh.). So I created a new VM, and added OM 2.0. It was your
> > > kind and spot-on answers to my previous questions that allowed me to
> get
> > > my install working properly. Again, my heartfelt thanks.
> > >
> > > Now, to a new question. I've tried to upload and stream a small test
> > > avi. But,
> > > the upload fails, with this output:
> > >
> > > Name: out
> > > Value:
> > > Name: exitValue
> > > Value: 1
> > > Name: command
> > > Value:
> > > [/usr/bin/ffmpeg, -i,
> > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> > >5.flv, -vcodec,
> > > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > > 256x240,
> > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> > >5.jpg] Name: error
> > > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg
> > > developers
> > > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat
> 4.4.6-4)
> > >
> > > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > > --enable-pthreads --enable-avfilter --prefix=/usr
> > > libavutil 50.36. 0 / 50.36. 0
> > > libavcore 0.16. 1 / 0.16. 1
> > > libavcodec 52.108. 0 / 52.108. 0
> > > libavformat 52.93. 0 / 52.93. 0
> > > libavdevice 52. 2. 3 / 52. 2. 3
> > > libavfilter 1.74. 0 / 1.74. 0
> > > libswscale 0.12. 0 / 0.12. 0
> > > libpostproc 51. 2. 0 / 51. 2. 0
> > >
> > >
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> > >5.flv: Invalid data found when processing input
> > >
> > > Name: process
> > > Value: previewUpload ID :: 5
> > > Name: exitValue
> > > Value: 0
> > > Name: command
> > > Value:
> > > Name: completeName
> > > Value:
> > >
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f2136
> > >c8dc1b0c4cdcb0a0ddddf Name: error
> > > Value:
> > > Name: fileExplorerItemId
> > > Value: 5
> > > Name: process
> > > Value:
> > >
> > > I'm unable to interpret this output. Your assistance in solving would
> be
> > > appreciated, as ever.
> > >
> > > Dimitri
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> >
> > --
> > Sebastian Wagner
> > https://twitter.com/#!/dead_lock
> > http://www.webbase-design.de
> > http://www.wagner-sebastian.com
> > seba.wagner@gmail.com
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
Sebastian Wagner
https://twitter.com/#!/dead_lock
http://www.webbase-design.de
http://www.wagner-sebastian.com
seba.wagner@gmail.com
Re: Streaming video
Posted by Dimitri Yioulos <dy...@onpointfc.com>.
Hi, Sebastian.
I just copied what appeared in the OM instance on my desktop when I tried to
upload the avi. Error.log in the OM log directory is empty. Would I find the
output in red5.log or openmeetings.log? What would I grep on?
Thanks.
Dimitri
On Thursday 09 August 2012 8:26:48 am seba.wagner@gmail.com wrote:
> I don' think you've copied the whole error log.
> The conversation log error is much longer. You just copied the final lines
> that convert a screenshot for the preview of the video.
> The actual error already happened before when the video was converted to a
> FLV, the FLV is either broken or was never successfully created from the
> given file.
>
> Sebastian
>
> 2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
>
> > Good morning (or afternoon, as the case may be), all.
> >
> > Just a brief aside: after setting up OM 2.0, with the help of Maxim,
> > Alexei, and
> > others, I completely blew up the VM it was loaded on. It was my non-OM
> > mistake
> > (yup, I make 'em), and was unrecoverable (hadn't backed up the VM,
> > either. Arrgh.). So I created a new VM, and added OM 2.0. It was your
> > kind and spot-on answers to my previous questions that allowed me to get
> > my install working properly. Again, my heartfelt thanks.
> >
> > Now, to a new question. I've tried to upload and stream a small test
> > avi. But,
> > the upload fails, with this output:
> >
> > Name: out
> > Value:
> > Name: exitValue
> > Value: 1
> > Name: command
> > Value:
> > [/usr/bin/ffmpeg, -i,
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >5.flv, -vcodec,
> > mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> > 256x240,
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >5.jpg] Name: error
> > Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg
> > developers
> > built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat 4.4.6-4)
> >
> > configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> > --enable-pthreads --enable-avfilter --prefix=/usr
> > libavutil 50.36. 0 / 50.36. 0
> > libavcore 0.16. 1 / 0.16. 1
> > libavcodec 52.108. 0 / 52.108. 0
> > libavformat 52.93. 0 / 52.93. 0
> > libavdevice 52. 2. 3 / 52. 2. 3
> > libavfilter 1.74. 0 / 1.74. 0
> > libswscale 0.12. 0 / 0.12. 0
> > libpostproc 51. 2. 0 / 51. 2. 0
> >
> > /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_
> >5.flv: Invalid data found when processing input
> >
> > Name: process
> > Value: previewUpload ID :: 5
> > Name: exitValue
> > Value: 0
> > Name: command
> > Value:
> > Name: completeName
> > Value:
> > /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f2136
> >c8dc1b0c4cdcb0a0ddddf Name: error
> > Value:
> > Name: fileExplorerItemId
> > Value: 5
> > Name: process
> > Value:
> >
> > I'm unable to interpret this output. Your assistance in solving would be
> > appreciated, as ever.
> >
> > Dimitri
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wagner@gmail.com
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Re: Streaming video
Posted by "seba.wagner@gmail.com" <se...@gmail.com>.
I don' think you've copied the whole error log.
The conversation log error is much longer. You just copied the final lines
that convert a screenshot for the preview of the video.
The actual error already happened before when the video was converted to a
FLV, the FLV is either broken or was never successfully created from the
given file.
Sebastian
2012/8/9 Dimitri Yioulos <dy...@onpointfc.com>
> Good morning (or afternoon, as the case may be), all.
>
> Just a brief aside: after setting up OM 2.0, with the help of Maxim,
> Alexei, and
> others, I completely blew up the VM it was loaded on. It was my non-OM
> mistake
> (yup, I make 'em), and was unrecoverable (hadn't backed up the VM, either.
> Arrgh.). So I created a new VM, and added OM 2.0. It was your kind and
> spot-on answers to my previous questions that allowed me to get my install
> working properly. Again, my heartfelt thanks.
>
> Now, to a new question. I've tried to upload and stream a small test avi.
> But,
> the upload fails, with this output:
>
> Name: out
> Value:
> Name: exitValue
> Value: 1
> Name: command
> Value:
> [/usr/bin/ffmpeg, -i,
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_5.flv,
> -vcodec,
> mjpeg, -vframes, 1, -an, -f, rawvideo, -s,
> 256x240,
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_5.jpg]
> Name: error
> Value: FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg
> developers
> built on Aug 8 2012 16:20:55 with gcc 4.4.6 20120305 (Red Hat 4.4.6-4)
>
> configuration: --enable-libmp3lame --enable-postproc --enable-gpl
> --enable-pthreads --enable-avfilter --prefix=/usr
> libavutil 50.36. 0 / 50.36. 0
> libavcore 0.16. 1 / 0.16. 1
> libavcodec 52.108. 0 / 52.108. 0
> libavformat 52.93. 0 / 52.93. 0
> libavdevice 52. 2. 3 / 52. 2. 3
> libavfilter 1.74. 0 / 1.74. 0
> libswscale 0.12. 0 / 0.12. 0
> libpostproc 51. 2. 0 / 51. 2. 0
>
> /usr/local/openmeetings/webapps/openmeetings/streams/hibernate/UPLOADFLV_5.flv:
> Invalid data found when processing input
>
> Name: process
> Value: previewUpload ID :: 5
> Name: exitValue
> Value: 0
> Name: command
> Value:
> Name: completeName
> Value:
> /usr/local/openmeetings/webapps/openmeetings/uploadtemp/files/4b0059f2136c8dc1b0c4cdcb0a0ddddf
> Name: error
> Value:
> Name: fileExplorerItemId
> Value: 5
> Name: process
> Value:
>
> I'm unable to interpret this output. Your assistance in solving would be
> appreciated, as ever.
>
> Dimitri
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
Sebastian Wagner
https://twitter.com/#!/dead_lock
http://www.webbase-design.de
http://www.wagner-sebastian.com
seba.wagner@gmail.com