You are viewing a plain text version of this content. The canonical link for it is here.
Posted to issues@maven.apache.org by "Micah Whitacre (JIRA)" <ji...@codehaus.org> on 2007/05/09 17:19:12 UTC
[jira] Created: (MECLIPSE-267) Enhance make-artifacts to not create
POMs that have version ranges
Enhance make-artifacts to not create POMs that have version ranges
------------------------------------------------------------------
Key: MECLIPSE-267
URL: http://jira.codehaus.org/browse/MECLIPSE-267
Project: Maven 2.x Eclipse Plugin
Issue Type: Improvement
Components: PDE support
Affects Versions: 2.3
Reporter: Micah Whitacre
Currently when using the make-artifacts goal to deploy Eclipse artifacts to a remote repository the POMs are created in such a way the versions of the dependencies have ranges similar to [3.3,4). This information is pulled from the Manifest. I'd like a way to specify not to use those version ranges in the POM but to instead have a soft dependency on a specific version. The situation that is occurring is that when I have deployed both Eclipse 3.2 and 3.3 endstates to a remote repository, the 3.2 dependencies have ranges specified which then pull in the 3.3 endstates. This causes conflicts when I want to only include 3.2 endstates. If there was a way to 1. not use version ranges in the POM and 2. instead have a soft dependency on a specific version. This would eliminate the need to specify each and every Eclipse 3.2 artifact for fear a transitive 3.3 dependency got pulled in.
I have also seen this cause errors when a transitive dependency pulls in a 3.3 endstate that has conflicting version ranges for an artifact I have a dependency on. Since the 3.3 endstates will have version ranges of [3.3,4) but I might specify 3.2 dependencies, if I have a first class dependency on 3.2 and a transitive dependency on the same artifact but the range is [3.3,4), I will not be able to build my project.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
[jira] Updated: (MECLIPSE-267) Enhance make-artifacts to not create
POMs that have version ranges
Posted by "Matthew Beermann (JIRA)" <ji...@codehaus.org>.
[ http://jira.codehaus.org/browse/MECLIPSE-267?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Matthew Beermann updated MECLIPSE-267:
--------------------------------------
Attachment: MECLIPSE-267-maven-eclipse-plugin.patch
I believe that this patch fixes the issue.
> Enhance make-artifacts to not create POMs that have version ranges
> ------------------------------------------------------------------
>
> Key: MECLIPSE-267
> URL: http://jira.codehaus.org/browse/MECLIPSE-267
> Project: Maven 2.x Eclipse Plugin
> Issue Type: Improvement
> Components: PDE support
> Affects Versions: 2.3
> Reporter: Micah Whitacre
> Attachments: MECLIPSE-267-maven-eclipse-plugin.patch
>
>
> Currently when using the make-artifacts goal to deploy Eclipse artifacts to a remote repository the POMs are created in such a way the versions of the dependencies have ranges similar to [3.3,4). This information is pulled from the Manifest. I'd like a way to specify not to use those version ranges in the POM but to instead have a soft dependency on a specific version. The situation that is occurring is that when I have deployed both Eclipse 3.2 and 3.3 endstates to a remote repository, the 3.2 dependencies have ranges specified which then pull in the 3.3 endstates. This causes conflicts when I want to only include 3.2 endstates. If there was a way to 1. not use version ranges in the POM and 2. instead have a soft dependency on a specific version. This would eliminate the need to specify each and every Eclipse 3.2 artifact for fear a transitive 3.3 dependency got pulled in.
> I have also seen this cause errors when a transitive dependency pulls in a 3.3 endstate that has conflicting version ranges for an artifact I have a dependency on. Since the 3.3 endstates will have version ranges of [3.3,4) but I might specify 3.2 dependencies, if I have a first class dependency on 3.2 and a transitive dependency on the same artifact but the range is [3.3,4), I will not be able to build my project.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
[jira] Updated: (MECLIPSE-267) Resolve version ranges in
make-artifacts
Posted by "Carlos Sanchez (JIRA)" <ji...@codehaus.org>.
[ http://jira.codehaus.org/browse/MECLIPSE-267?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Carlos Sanchez updated MECLIPSE-267:
------------------------------------
Summary: Resolve version ranges in make-artifacts (was: Enhance make-artifacts to not create POMs that have version ranges)
> Resolve version ranges in make-artifacts
> ----------------------------------------
>
> Key: MECLIPSE-267
> URL: http://jira.codehaus.org/browse/MECLIPSE-267
> Project: Maven 2.x Eclipse Plugin
> Issue Type: Improvement
> Components: PDE support
> Affects Versions: 2.3
> Reporter: Micah Whitacre
> Assignee: Carlos Sanchez
> Fix For: 2.4
>
> Attachments: MECLIPSE-267-maven-eclipse-plugin.patch
>
>
> Currently when using the make-artifacts goal to deploy Eclipse artifacts to a remote repository the POMs are created in such a way the versions of the dependencies have ranges similar to [3.3,4). This information is pulled from the Manifest. I'd like a way to specify not to use those version ranges in the POM but to instead have a soft dependency on a specific version. The situation that is occurring is that when I have deployed both Eclipse 3.2 and 3.3 endstates to a remote repository, the 3.2 dependencies have ranges specified which then pull in the 3.3 endstates. This causes conflicts when I want to only include 3.2 endstates. If there was a way to 1. not use version ranges in the POM and 2. instead have a soft dependency on a specific version. This would eliminate the need to specify each and every Eclipse 3.2 artifact for fear a transitive 3.3 dependency got pulled in.
> I have also seen this cause errors when a transitive dependency pulls in a 3.3 endstate that has conflicting version ranges for an artifact I have a dependency on. Since the 3.3 endstates will have version ranges of [3.3,4) but I might specify 3.2 dependencies, if I have a first class dependency on 3.2 and a transitive dependency on the same artifact but the range is [3.3,4), I will not be able to build my project.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
[jira] Commented: (MECLIPSE-267) Enhance make-artifacts to not
create POMs that have version ranges
Posted by "Matthew Beermann (JIRA)" <ji...@codehaus.org>.
[ http://jira.codehaus.org/browse/MECLIPSE-267?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel#action_95483 ]
Matthew Beermann commented on MECLIPSE-267:
-------------------------------------------
I just wanted to chime in and point out that:
* Version ranges appear to be discouraged within Maven, in general - they're used almost nowhere within Maven itself.
* Although Maven and OSGi both appear to support version ranges, the resemblance is superficial. In particular, they make opposite assumptions about whether a qualified version is greater than or less than its unqualified counterpart. Which means that blindly reusing the OSGi range in Maven (as the plugin does today) is actually quite dangerous.
> Enhance make-artifacts to not create POMs that have version ranges
> ------------------------------------------------------------------
>
> Key: MECLIPSE-267
> URL: http://jira.codehaus.org/browse/MECLIPSE-267
> Project: Maven 2.x Eclipse Plugin
> Issue Type: Improvement
> Components: PDE support
> Affects Versions: 2.3
> Reporter: Micah Whitacre
>
> Currently when using the make-artifacts goal to deploy Eclipse artifacts to a remote repository the POMs are created in such a way the versions of the dependencies have ranges similar to [3.3,4). This information is pulled from the Manifest. I'd like a way to specify not to use those version ranges in the POM but to instead have a soft dependency on a specific version. The situation that is occurring is that when I have deployed both Eclipse 3.2 and 3.3 endstates to a remote repository, the 3.2 dependencies have ranges specified which then pull in the 3.3 endstates. This causes conflicts when I want to only include 3.2 endstates. If there was a way to 1. not use version ranges in the POM and 2. instead have a soft dependency on a specific version. This would eliminate the need to specify each and every Eclipse 3.2 artifact for fear a transitive 3.3 dependency got pulled in.
> I have also seen this cause errors when a transitive dependency pulls in a 3.3 endstate that has conflicting version ranges for an artifact I have a dependency on. Since the 3.3 endstates will have version ranges of [3.3,4) but I might specify 3.2 dependencies, if I have a first class dependency on 3.2 and a transitive dependency on the same artifact but the range is [3.3,4), I will not be able to build my project.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
[jira] Closed: (MECLIPSE-267) Enhance make-artifacts to not create
POMs that have version ranges
Posted by "Carlos Sanchez (JIRA)" <ji...@codehaus.org>.
[ http://jira.codehaus.org/browse/MECLIPSE-267?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Carlos Sanchez closed MECLIPSE-267.
-----------------------------------
Assignee: Carlos Sanchez
Resolution: Fixed
Fix Version/s: 2.4
Used a different solution, but fixed anyway
> Enhance make-artifacts to not create POMs that have version ranges
> ------------------------------------------------------------------
>
> Key: MECLIPSE-267
> URL: http://jira.codehaus.org/browse/MECLIPSE-267
> Project: Maven 2.x Eclipse Plugin
> Issue Type: Improvement
> Components: PDE support
> Affects Versions: 2.3
> Reporter: Micah Whitacre
> Assignee: Carlos Sanchez
> Fix For: 2.4
>
> Attachments: MECLIPSE-267-maven-eclipse-plugin.patch
>
>
> Currently when using the make-artifacts goal to deploy Eclipse artifacts to a remote repository the POMs are created in such a way the versions of the dependencies have ranges similar to [3.3,4). This information is pulled from the Manifest. I'd like a way to specify not to use those version ranges in the POM but to instead have a soft dependency on a specific version. The situation that is occurring is that when I have deployed both Eclipse 3.2 and 3.3 endstates to a remote repository, the 3.2 dependencies have ranges specified which then pull in the 3.3 endstates. This causes conflicts when I want to only include 3.2 endstates. If there was a way to 1. not use version ranges in the POM and 2. instead have a soft dependency on a specific version. This would eliminate the need to specify each and every Eclipse 3.2 artifact for fear a transitive 3.3 dependency got pulled in.
> I have also seen this cause errors when a transitive dependency pulls in a 3.3 endstate that has conflicting version ranges for an artifact I have a dependency on. Since the 3.3 endstates will have version ranges of [3.3,4) but I might specify 3.2 dependencies, if I have a first class dependency on 3.2 and a transitive dependency on the same artifact but the range is [3.3,4), I will not be able to build my project.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira