You are viewing a plain text version of this content. The canonical link for it is here.
Posted to server-user@james.apache.org by Anthony Borrow <ar...@jesuits.net> on 2004/06/19 03:24:31 UTC
Upgrade from 2.1 to 2.2 - Fetch
I upgraded from 2.1 to 2.2 (WinXP, J2SDK1.4.2_04) but when I tried to
restart I get the following error. Any suggestions to help me get me up
and running James 2.2 would be greatly appreciated.
Two smaller issues that I discovered while upgrading. I had an error
with the SPOOL table in the MySQL repository - I simply deleted the
table and was able to work past that error but it might be good to
document changes made in table structures (v2.2 added a field to the
SPOOL table). One minor detail that I noticed, the wrapper.conf file
still lists the Service name as James Mail Server 2.1 - it would also be
good to get that corrected so that it reads 2.2 as some folks might be
misled into thinking that they are running 2.1 when in fact they are
running 2.2.
Peace - Anthony
Using PHOENIX_HOME: C:\james
Using PHOENIX_TMPDIR: C:\james\temp
Using JAVA_HOME: c:\j2sdk1.4.2_04
Phoenix 4.0.1
James 2.2.0
Remote Manager Service started plain:4555
POP3 Service started plain:110
SMTP Service started plain:25
NNTP Service started plain:119
Fetch POP Disabled
There was an uncaught exception:
---------------------------------------------------------
--- Message ---
Failed to start application james.
--- Stack Trace ---
org.apache.avalon.phoenix.interfaces.DeploymentException: Failed to
start application james.
at
org.apache.avalon.phoenix.components.deployer.DefaultDeployer.deploy(DefaultDeployer.java:379)
at
org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.deployFile(DefaultEmbeddor.java:498)
at
org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.deployFile(DefaultEmbeddor.java:491)
at
org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.deployFiles(DefaultEmbeddor.java:476)
at
org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.deployDefaultApplications(DefaultEmbeddor.java:466)
at
org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.execute(DefaultEmbeddor.java:224)
at org.apache.avalon.phoenix.frontends.CLIMain.run(CLIMain.java:158)
at org.apache.avalon.phoenix.frontends.CLIMain.execute(CLIMain.java:144)
at org.apache.avalon.phoenix.frontends.CLIMain.main(CLIMain.java:102)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.avalon.phoenix.launcher.Main.startup(Main.java:94)
at org.apache.avalon.phoenix.launcher.Main.main(Main.java:46)
Caused by: org.apache.avalon.framework.CascadingException: Failed to
start application james.
at
org.apache.avalon.phoenix.components.kernel.DefaultKernel.startup(DefaultKernel.java:195)
at
org.apache.avalon.phoenix.components.kernel.DefaultKernel.addApplication(DefaultKernel.java:254)
at
org.apache.avalon.phoenix.components.deployer.DefaultDeployer.deploy(DefaultDeployer.java:353)
... 14 more
Caused by: org.apache.avalon.phoenix.interfaces.ApplicationException:
Component named "fetchmail" failed to pass through the Configuration
stage. (Reason:
org.apache.avalon.framework.configuration.ConfigurationException: Block
named "fetchmail" implements Configurable, but has no corresponding in
config.xml).
at
org.apache.avalon.phoenix.components.application.DefaultApplication.start(DefaultApplication.java:144)
at
org.apache.avalon.framework.container.ContainerUtil.start(ContainerUtil.java:251)
at
org.apache.avalon.phoenix.components.kernel.DefaultKernel.startup(DefaultKernel.java:178)
... 16 more
*Caused by:
org.apache.excalibur.containerkit.lifecycle.LifecycleException:
Component named "fetchmail" failed to pass through the Configuration
stage. (Reason:
org.apache.avalon.framework.configuration.ConfigurationException: Block
named "fetchmail" implements Configurable, but has no corresponding in
config.xml).
*
Below is my config.xml
<?xml version="1.0"?>
<!-- Configuration file for the Apache Jakarta James server -->
<!-- This file contains important settings that control the behaviour -->
<!-- of all of the services and repositories. -->
<!-- README! -->
<!-- This configuration file is designed to run without alteration for
simple tests. -->
<!-- It assumes you have a DNS server on localhost and assigns a root
password of root. -->
<!-- In case the defaults do not suit you, the items you are most likely
to need to change -->
<!-- are preceded by a CHECKME! or CONFIRM? comment in the left margin. -->
<!-- For production use you will probably need to make more extensive
changes, see -->
<!-- http://james.apache.org/documentation_2_1.html -->
<!-- $Revision: 1.40.2.5 $ Committed on $Date: 2003/05/12 21:10:24 $ by:
$Author: noel $ -->
<config>
<James>
<!-- CHECKME! -->
<!-- This is the postmaster email address for this mail server. -->
<!-- Set this to the appropriate email address for error reports -->
<!-- If this is set to a non-local email address, the mail server -->
<!-- will still function, but will generate a warning on startup. -->
<postmaster>postmaster@localhost</postmaster>
<!-- servernames identifies the DNS namespace served by this
instance of James. -->
<!-- These servernames are used for both matcher/mailet processing
and SMTP auth -->
<!-- to determine when a mail is intended for local delivery. -->
<!-- -->
<!-- If autodetect is TRUE, James wil attempt to discover its own
host name AND -->
<!-- use any explicitly specified servernames. -->
<!-- If autodetect is FALSE, James will use only the specified
servernames. -->
<!-- -->
<!-- If autodetectIP is not FALSE, James will also allow add the
IP address for each servername. -->
<!-- The automatic IP detection is to support RFC 2821, Sec 4.1.3,
address literals. -->
<!-- -->
<!-- To override autodetected server names simply add explicit
servername elements. -->
<!-- In most cases this will be necessary. -->
<!-- By default, the servername 'localhost' is specified. This can
be removed, if required. -->
<!-- -->
<!-- Warning: If you are using fetchpop it is important to include
the -->
<!-- fetched domains in the server name list to prevent
looping. -->
<servernames autodetect="true" autodetectIP="true">
<!-- CONFIRM? -->
<servername>localhost</servername>
</servernames>
<!-- Set whether user names are case sensitive or case insensitive -->
<!-- Set whether to enable local aliases -->
<!-- Set whether to enable forwarding -->
<usernames ignoreCase="true" enableAliases="true"
enableForwarding="true"/>
<!-- The inbox repository is the location for users inboxes -->
<!-- Default setting: file based repository - enter path ( use
"file:///" for absolute) -->
<!-- <inboxRepository>
<repository destinationURL="file://var/mail/inboxes/" type="MAIL"/>
</inboxRepository> -->
<!-- Alternative inbox repository definition for DB use. -->
<!-- The format for the destinationURL is
"db://<data-source>/<table>" -->
<!-- <data-source> is the datasource name set up in the
database-connections block, below -->
<!-- <table> is the name of the table to store user inboxes in -->
<!-- The user name is used as <repositoryName> for this repository
config. -->
<inboxRepository>
<repository destinationURL="db://maildb/inbox/" type="MAIL"/>
</inboxRepository>
<!-- Alternative inbox repository definition for DB use. -->
<!-- Stores message body in file system, rest in database -->
<!--
<inboxRepository>
<repository destinationURL="dbfile://maildb/inbox/" type="MAIL"/>
</inboxRepository>
-->
</James>
<!-- Fetch pop block, fetches mail from POP3 servers and inserts it
into the incoming spool -->
<!-- Warning: It is important to prevent mail from looping by setting
the -->
<!-- fetched domains in the <servernames> section of the <James>
block -->
<!-- above. This block is disabled by
default. -->
* <fetchpop enabled="false">
<!-- You can have as many fetch tasks as you want, but each must
have a -->
<!-- unique name by which it identified -->
<fetch name="mydomain.com">
<!-- Host name or IP address -->
<host>mail.mydomain.com</host>
<!-- Account login username -->
<user>username</user>
<!-- Account login password -->
<password>pass</password>
<!-- How frequently this account is checked - in
milliseconds. 600000 is every ten minutes -->
<interval>600000</interval>
</fetch>
</fetchpop>
*
<!-- The James Spool Manager block -->
<!-- -->
<!-- This block is responsible for processing messages on the spool. -->
<spoolmanager>
<!-- Number of spool threads -->
<threads> 10 </threads>
<!-- Set the Java packages from which to load mailets and matchers -->
<mailetpackages>
<mailetpackage>org.apache.james.transport.mailets</mailetpackage>
</mailetpackages>
<matcherpackages>
<matcherpackage>org.apache.james.transport.matchers</matcherpackage>
</matcherpackages>
<!-- The root processor is a required processor - James routes all
mail on the spool -->
<!-- through this processor first. -->
<!-- -->
<!-- This configuration is a sample configuration for the root
processor. -->
<processor name="root">
<!-- Checks that the email Sender is associated with a valid
domain. -->
<!-- Useful for detecting and eliminating spam. -->
<!-- For this block to function, the spam processor must be
configured. -->
<!--
<mailet match="SenderInFakeDomain" class="ToProcessor">
<processor> spam </processor>
</mailet>
-->
<!-- Important check to avoid looping -->
<mailet match="RelayLimit=30" class="Null"/>
<!-- White List:
If you use block lists, you will probably want to check
for known permitted senders. This is particularly true
if you use more aggressive block lists, such as SPEWS,
that are prone to block entire subnets without regard
for non-spamming senders.
-->
<!-- specific known senders -->
<!--
<mailet match="SenderIs=goodboy@goodhost"
class="ToProcessor">
<processor> transport </processor>
</mailet>
-->
<!-- People on this list agree to pay a penalty if they send
spam -->
<mailet match="InSpammerBlacklist=query.bondedsender.org"
class="ToProcessor">
<processor> transport </processor>
</mailet>
<!-- E-mail legally required not to be spam (see:
http://www.habeas.com) -->
<!--
<mailet match="HasHabeasWarrantMark" class="ToProcessor">
<processor> transport </processor>
</mailet>
-->
<!-- End of White List -->
<!-- Check for delivery from a known spam server -->
<!-- This set of matchers/mailets redirect all emails from
known -->
<!-- black holes, open relays, and spam servers to the spam
processor -->
<!-- For this set to function properly, the spam processor must
be configured. -->
<mailet match="InSpammerBlacklist=dnsbl.njabl.org"
class="ToProcessor">
<processor> spam </processor>
<notice>550 Requested action not taken: rejected - see
http://njabl.org/ </notice>
</mailet>
<mailet match="InSpammerBlacklist=relays.ordb.org"
class="ToProcessor">
<processor> spam </processor>
<notice>550 Requested action not taken: rejected - see
http://www.ordb.org/ </notice>
</mailet>
<!-- Sample matching to kill a message (send to Null) -->
<!--
<mailet match="RecipientIs=badboy@badhost" class="Null"/>
-->
<!-- Send remaining mails to the transport processor for either
local or remote delivery -->
<mailet match="All" class="ToProcessor">
<processor> transport </processor>
</mailet>
</processor>
<!-- The error processor is required. James may internally set
emails to the -->
<!-- error state. The error processor is generally invoked when
there is an -->
<!-- unexpected error either in the mailet chain or internal to
James. -->
<!-- -->
<!-- By default configuration all email that generates an error in
placed in -->
<!-- an error repository. -->
<processor name="error">
<!-- Logs any messages to the repository specified -->
<mailet match="All" class="ToRepository">
<!-- <repositoryPath> file://var/mail/error/</repositoryPath> -->
<!-- An alternative database repository example follows. -->
<repositoryPath> db://maildb/deadletter/error </repositoryPath>
<passThrough> true </passThrough>
</mailet>
<!-- If you want to notify the sender their message generated
an error, uncomment this -->
<!--
<mailet match="All" class="NotifySender"/>
-->
<!-- If you want to notify the postmaster that a message
generated an error, uncomment this -->
<!--
<mailet match="All" class="NotifyPostmaster"/>
-->
</processor>
<!-- Processor CONFIGURATION SAMPLE: transport is a sample custom
processor for local or -->
<!-- remote delivery -->
<processor name="transport">
<!-- Is the recipient is for a local account, deliver it
locally -->
<mailet match="RecipientIsLocal" class="LocalDelivery"/>
<!-- If the host is handled by this server and it did not get -->
<!-- locally delivered, this is an invalid recipient -->
<mailet match="HostIsLocal" class="ToProcessor">
<processor>error</processor>
</mailet>
<!-- CHECKME! -->
<!-- This is an anti-relay matcher/mailet combination -->
<!-- -->
<!-- Emails sent from servers not in the network list are -->
<!-- rejected as spam. This is one method of preventing your -->
<!-- server from being used as an open relay. Make sure you
understand -->
<!-- how to prevent your server from becoming an open relay
before -->
<!-- changing this configuration. -->
<!-- -->
<!-- This matcher/mailet combination must come after local
delivery has -->
<!-- been performed. Otherwise local users will not be able to
receive -->
<!-- email from senders not in this remote address list. -->
<!-- -->
<!-- If you are using this matcher/mailet you will probably
want to -->
<!-- update the configuration to include your own
network/addresses. The -->
<!-- matcher can be configured with a comma separated list of
IP addresses -->
<!-- wildcarded IP subnets, and wildcarded hostname subnets. -->
<!-- e.g. "RemoteAddrNotInNetwork=127.0.0.1, abc.de.*,
192.168.0.*" -->
<!-- -->
<!-- If you are using SMTP authentication then you can (and
generally -->
<!-- should) disable this matcher/mailet pair. -->
<mailet match="RemoteAddrNotInNetwork=127.0.0.1"
class="ToProcessor">
<processor> spam </processor>
</mailet>
<!-- Attempt remote delivery using the specified repository for
the spool, -->
<!-- using delay time to retry delivery and the maximum number
of retries -->
<mailet match="All" class="RemoteDelivery">
<!-- <outgoing> file://var/mail/outgoing/ </outgoing> -->
<!-- alternative database repository example below -->
<outgoing> db://maildb/spool/outgoing </outgoing>
<!-- Number of milliseconds between delivery attempts -->
<delayTime> 21600000 </delayTime>
<!-- Number of failed attempts before returning to the
sender -->
<maxRetries> 5 </maxRetries>
<!-- The number of threads that should be trying to deliver
outgoing messages -->
<deliveryThreads> 1 </deliveryThreads>
<!-- A single mail server to deliver all outgoing messages. -->
<!-- This is useful if this server is a backup or failover
machine, -->
<!-- or if you want all messages to be routed through a
particular mail server, -->
<!-- regardless of the email addresses specified in the
message -->
<!-- -->
<!-- The gateway element specifies the gateway SMTP server
name. -->
<!-- If your gateway mail server is listening on a port
other than 25, -->
<!-- you can set James to connect to it on that port using
the gatewayPort -->
<!-- element. -->
<!--
<gateway> otherserver.mydomain.com </gateway>
<gatewayPort>25</gatewayPort>
-->
</mailet>
</processor>
<!-- Processor CONFIGURATION SAMPLE: spam is a sample custom
processor for handling -->
<!-- spam. -->
<!-- You can either log these, bounce these, or just ignore them. -->
<processor name="spam">
<!-- To destroy all messages, uncomment this matcher/mailet
configuration -->
<!--
<mailet match="All" class="Null"/>
-->
<!-- To notify the sender their message was marked as spam,
uncomment this matcher/mailet configuration -->
<!--
<mailet match="All" class="NotifySender"/>
-->
<!-- To notify the postmaster that a message was marked as
spam, uncomment this matcher/mailet configuration -->
<!--
<mailet match="All" class="NotifyPostmaster"/>
-->
<!-- To log the message to a repository, this matcher/mailet
configuration should be uncommented. -->
<!-- This is the default configuration. -->
<mailet match="All" class="ToRepository">
<!-- <repositoryPath>file://var/mail/spam/</repositoryPath>
-->
<!-- Changing the repositoryPath, as in this commented out
example, will -->
<!-- cause the mails to be stored in a database repository. -->
<!-- Please note that only one repositoryPath element can be
present for the mailet -->
<!-- configuration. -->
<repositoryPath> db://maildb/deadletter/spam </repositoryPath>
</mailet>
</processor>
</spoolmanager>
<!-- DNS Server Block -->
<!-- -->
<!-- Specifies DNS Server information for use by various components
inside -->
<!-- James. -->
<!-- -->
<!-- Information includes a list of DNS Servers to be used by James.
These are -->
<!-- specified by the server elements, each of which is a child
element of the -->
<!-- servers element. Each server element is the IP address of a
single DNS server. -->
<!-- The servers element can have multiple server children. -->
<dnsserver>
<servers>
<!-- CONFIRM? -->
<!--Enter ip address of your DNS server, one IP address per
server -->
<!-- element. The default configuration assumes a DNS server on
the localhost. -->
<server>127.0.0.1</server>
</servers>
<authoritative>false</authoritative>
</dnsserver>
<remotemanager>
<port>4555</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in
the RemoteManager -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="true">myMailServer</helloName>
<administrator_accounts>
<!-- CHECKME! -->
<!-- Change the default login/password. -->
<account login="arborrow" password="[PASSWORD]"/>
</administrator_accounts>
<connectiontimeout> 60000 </connectiontimeout>
</handler>
</remotemanager>
<!-- The POP3 server is enabled by default -->
<!-- Disabling blocks will stop them from listening, -->
<!-- but does not free as many resources as removing them would -->
<pop3server enabled="true">
<!-- port 995 is the well-known/IANA registered port for POP3S ie
over SSL/TLS -->
<!-- port 110 is the well-known/IANA registered port for Standard
POP3 -->
<port>110</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in
the POP3 -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="true">myMailServer</helloName>
<connectiontimeout>120000</connectiontimeout>
</handler>
</pop3server>
<!-- The SMTP server is enabled by default -->
<!-- Disabling blocks will stop them from listening, -->
<!-- but does not free as many resources as removing them would -->
<smtpserver enabled="true">
<!-- port 25 is the well-known/IANA registered port for SMTP -->
<port>25</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in
the SMTP -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="true">myMailServer</helloName>
<connectiontimeout>360000</connectiontimeout>
<!-- Uncomment this if you want to require SMTP
authentication. -->
<authRequired>true</authRequired>
<!-- Uncomment this if you want to verify sender addresses,
ensuring that -->
<!-- the sender address matches the user who has
authenticated. -->
<!-- This prevents a user of your mail server from acting as
someone else -->
<!-- <verifyIdentity>true</verifyIdentity> -->
<!-- This sets the maximum allowed message size (in kilobytes)
for this -->
<!-- SMTP service. If unspecified, the value defaults to 0,
which means no limit. -->
<maxmessagesize>0</maxmessagesize>
</handler>
</smtpserver>
<!-- The NNTP server is enabled by default -->
<!-- Disabling blocks will stop them from listening, -->
<!-- but does not free as many resources as removing them would -->
<!-- NNTP-specific: if you disable the NNTP Server, you should also
set the nntp-repository's
threadCount to 0, otherwise there will be threads active and
polling -->
<nntpserver enabled="true">
<!-- THE NNTP PROTOCOL IS EXPERIMENTAL AND NOT AS WELL TESTED AS SMTP
AND POP3 IN THIS RELEASE.
The James project recommends that you check the James web site
for updates to the NNTP
service. -->
<!-- port 563 is the well-known/IANA registered port for NNTP over
SSL/TLS -->
<!-- port 119 is the well-known/IANA registered port for Standard
NNTP -->
<port>119</port>
<!-- Uncomment this if you want to bind to a specific inetaddress -->
<!--
<bind> </bind>
-->
<!-- Uncomment this if you want to use TLS (SSL) on this port -->
<!--
<useTLS>true</useTLS>
-->
<handler>
<!-- This is the name used by the server to identify itself in
the NNTP -->
<!-- protocol. If autodetect is TRUE, the server will discover
its -->
<!-- own host name and use that in the protocol. If discovery
fails, -->
<!-- the value of 'localhost' is used. If autodetect is FALSE,
James -->
<!-- will use the specified value. -->
<helloName autodetect="true">myMailServer</helloName>
<connectiontimeout>120000</connectiontimeout>
<!-- Set the authRequired value to true to enable
authenticated NNTP -->
<authRequired>false</authRequired>
</handler>
</nntpserver>
<nntp-repository>
<!-- If this is set to true, posting will be disallowed. -->
<readOnly>false</readOnly>
<rootPath>file://var/nntp/groups</rootPath>
<tempPath>file://var/nntp/temp</tempPath>
<articleIDPath>file://var/nntp/articleid</articleIDPath>
<articleIDDomainSuffix>news.james.apache.org</articleIDDomainSuffix>
<!-- The news groups hosted in this NNTP repository. -->
<newsgroups>
<newsgroup>org.apache.james.dev</newsgroup>
<newsgroup>org.apache.james.user</newsgroup>
<newsgroup>org.apache.avalon.dev</newsgroup>
<newsgroup>org.apache.avalon.user</newsgroup>
</newsgroups>
<spool>
<configuration>
<spoolPath>file://var/nntp/spool</spoolPath>
<!-- The number of threads that process spooler related
tasks. -->
<threadCount>1</threadCount>
<!-- The spool thread(s) should idle for some time, if it
has nothing to do -->
<threadIdleTime>60000</threadIdleTime>
</configuration>
</spool>
</nntp-repository>
<!-- The Mailstore block -->
<mailstore>
<repositories>
<!-- File based repositories. These repositories store all
message data -->
<!-- in the file system. -->
<repository
class="org.apache.james.mailrepository.AvalonMailRepository">
<protocols>
<protocol>file</protocol>
</protocols>
<types>
<type>MAIL</type>
</types>
</repository>
<repository
class="org.apache.james.mailrepository.AvalonSpoolRepository">
<protocols>
<protocol>file</protocol>
</protocols>
<types>
<type>SPOOL</type>
</types>
</repository>
<!-- JDBC based repositories. These repositories store all
message data -->
<!-- in the database. -->
<repository
class="org.apache.james.mailrepository.JDBCMailRepository">
<protocols>
<protocol>db</protocol>
</protocols>
<types>
<type>MAIL</type>
</types>
<config>
<sqlFile>file://conf/sqlResources.xml</sqlFile>
</config>
</repository>
<repository
class="org.apache.james.mailrepository.JDBCSpoolRepository">
<protocols>
<protocol>db</protocol>
</protocols>
<types>
<type>SPOOL</type>
</types>
<config>
<sqlFile>file://conf/sqlResources.xml</sqlFile>
</config>
</repository>
<!-- These repositories store message delivery and headers in
the DB, and the body to the filesystem -->
<repository
class="org.apache.james.mailrepository.JDBCMailRepository">
<protocols>
<protocol>dbfile</protocol>
</protocols>
<types>
<type>MAIL</type>
</types>
<config>
<sqlFile>file://conf/sqlResources.xml</sqlFile>
<filestore>file://var/dbmail</filestore>
</config>
</repository>
<repository
class="org.apache.james.mailrepository.JDBCSpoolRepository">
<protocols>
<protocol>dbfile</protocol>
</protocols>
<types>
<type>SPOOL</type>
</types>
<config>
<sqlFile>file://conf/sqlResources.xml</sqlFile>
<filestore>file://var/dbmail</filestore>
</config>
</repository>
</repositories>
<!-- Spool repository configuration -->
<!-- The spool repository is the location where incoming mails are
temporarily stored -->
<!-- before being processed. -->
<!-- <spoolRepository>
<repository destinationURL="file://var/mail/spool/" type="SPOOL"/>
</spoolRepository>
-->
<!-- Alternative spool repository definition for JDBC use -->
<spoolRepository>
<repository destinationURL="db://maildb/spool/spool" type="SPOOL"/>
</spoolRepository>
<!-- Alternative spool repository definition for JDBC use -->
<!-- Stores message body in file system, rest in database -->
<!--
<spoolRepository>
<repository destinationURL="dbfile://maildb/spool/spool"
type="SPOOL"/>
</spoolRepository>
-->
</mailstore>
<!-- The User Storage block -->
<users-store>
<!-- Configure User Repositories here. -->
<!-- -->
<!-- User repositories are required for the following purposes: -->
<!-- - storing James user information, including forwards,
aliases, -->
<!-- and authentication data. -->
<!-- - holding lists of users for the listserv mailet -->
<!-- Currently, two different storage options are available: -->
<!-- - file-based storage using Java serialization -->
<!-- - database-backed storage -->
<!-- (Use of database or file-system is defined on a
"per-repository" basis) -->
<!-- -->
<!-- Note: One user repository is required for James: -->
<!-- LocalUsers - the users for whom you are providing POP3,
NNTP, or SMTP service -->
<!-- -->
<!-- Other repositories may be used by matchers or mailets. -->
<!-- Default: File-based user repositories Use these
configurations to store user info in the filesystem -->
<!-- The LocalUsers repository, for storing James' User info. -->
<!-- <repository name="LocalUsers"
class="org.apache.james.userrepository.UsersFileRepository">
<destination URL="file://var/users/"/>
</repository>
-->
<!-- Database backed user repositories -->
<!-- -->
<!-- Use these configurations to store user info in a database. -->
<!-- Note: The <data-source> element must refer to a connection
configured -->
<!-- in the <database-connections> configuration section. -->
<!-- The LocalUsers repository, for storing James' User info. -->
<repository name="LocalUsers"
class="org.apache.james.userrepository.JamesUsersJdbcRepository"
destinationURL="db://maildb/users">
<sqlFile>file://conf/sqlResources.xml</sqlFile>
</repository>
</users-store>
<!-- The database-connections block -->
<database-connections>
<!-- These connections are referred to by name elsewhere in the
config file -->
<!-- CHECKME! -->
<!-- To allow James to use a database you must configure the
database connection here. -->
<!-- If you are not using a database, you can leave this section
unchanged. -->
<!-- These connections are referred to by name in URLs elsewhere
in the config file. -->
<data-sources>
<!-- James is distributed with a built in relevant copy of the
mm.mysql JDBC -->
<!-- driver. No additional driver is needed for mysql. Read
the mm.mysql LGPL -->
<!-- license at
apps\james\SAR-INF\lib\mm.mysql.LICENCE -->
<!-- JDBC driver .jar libraries for other RDBMS can be placed
in ~james/lib/ -->
<!-- Example, connecting to a MySQL database called "mail" on
localhost-->
<!-- -->
<!-- The max value is the maximum number of concurrent
connections James will -->
<!-- open to this database-->
<!-- If you see "SQLException: Giving up... no connections
available." in your -->
<!-- log files or bounced mail you should increase this value -->
<data-source name="maildb"
class="org.apache.james.util.mordred.JdbcDataSource">
<driver>org.gjt.mm.mysql.Driver</driver>
<dburl>jdbc:mysql://127.0.0.1/james?autoReconnect=true</dburl>
<user>JAMES_USER</user>
<password>PASSWORD</password>
<max>20</max>
</data-source>
<!-- Example, connecting to a Microsoft MSSQL database called
"mail" on localhost-->
<!-- -->
<!-- The max value is the maximum number of concurrent
connections James will -->
<!-- open to this database-->
<!-- If you see "SQLException: Giving up... no connections
available." in your -->
<!-- log files or bounced mail you should increase this value -->
<!--
<data-source name="maildb"
class="org.apache.james.util.mordred.JdbcDataSource">
<driver>com.inet.tds.TdsDriver</driver>
<dburl>jdbc:inetdae7:127.0.0.1?database=James</dburl>
<user>sa_james</user>
<password>blahblah</password>
<max>20</max>
</data-source>
-->
</data-sources>
</database-connections>
<!-- Configuration for Cornerstone Services -->
<!-- -->
<!-- For a simple configuration, nothing beneath this line should
require -->
<!-- alteration. -->
<!-- -->
<!-- You will need to adjust the Socket Manager service configuration
if you want -->
<!-- to enable secure sockets (TLS) for any James
service. -->
<!-- -->
<!-- Complex or high volume configurations may require changes to the
parameters -->
<!-- in this section. Please read the James and Avalon documentation
before -->
<!-- attempting to adjust this section. -->
<!-- -->
<!-- The Object Storage block -->
<!-- -->
<!-- Defines file storage details that are used for file-based
repositories. -->
<objectstorage>
<repositories>
<repository
class="org.apache.james.mailrepository.filepair.File_Persistent_Object_Repository">
<protocols>
<protocol>file</protocol>
</protocols>
<types>
<type>OBJECT</type>
</types>
<models>
<model>SYNCHRONOUS</model>
<model>ASYNCHRONOUS</model>
<model>CACHE</model>
</models>
</repository>
<repository
class="org.apache.james.mailrepository.filepair.File_Persistent_Stream_Repository">
<protocols>
<protocol>file</protocol>
</protocols>
<types>
<type>STREAM</type>
</types>
<models>
<model>SYNCHRONOUS</model>
<model>ASYNCHRONOUS</model>
<model>CACHE</model>
</models>
</repository>
</repositories>
</objectstorage>
<!-- The Connection Manager block -->
<!-- -->
<!-- The idle-timeout is the number of milliseconds that it will take
for idle -->
<!-- client connections managed by this connection manager to be
marked at timed out. -->
<!-- If no value is specified, the value defaults to 5 minutes,
300000 milliseconds -->
<!-- A value of 0 means that client sockets will not timeout. -->
<!-- -->
<!-- The max-connections parameter specifies the default maximum
number of client -->
<!-- connections that this connection manager will allow per managed
server socket. -->
<!-- This value can be overridden by each individual service. -->
<!-- If no value is specified, the value defaults to 30. -->
<!-- A value of 0 means that there is no limit imposed by the
connection manager, although -->
<!-- resource limitations imposed by other components (i.e. max # of
threads) may -->
<!-- serve to limit the number of open connections. -->
<!-- -->
<connections>
<idle-timeout>300000</idle-timeout>
<max-connections>30</max-connections>
</connections>
<!-- The Socket Manager block -->
<!-- -->
<!-- The server-sockets element has a number of factory sub-elements. -->
<!-- Each of the factory elements has a name and class attribute -->
<!-- The name attribute for each factory element must be unique. -->
<!-- The class attribute is the name of a class that implements the -->
<!-- interface
org.apache.avalon.cornerstone.services.ServerSocketFactory -->
<!-- Specific factory elements may require some sub-elements. This
is -->
<!-- factory class dependent. -->
<!-- -->
<!-- The client-sockets element has a number of factory sub-elements. -->
<!-- Each of the factory elements has a name and class attribute -->
<!-- The name attribute for each factory element must be unique. -->
<!-- The class attribute is the name of a class that implements the -->
<!-- interface org.apache.avalon.cornerstone.services.SocketFactory -->
<!-- Specific factory elements may require some sub-elements. This
is -->
<!-- factory class dependent. -->
<!-- -->
<sockets>
<server-sockets>
<factory name="plain"
class="org.apache.avalon.cornerstone.blocks.sockets.DefaultServerSocketFactory"/>
<!--
<factory name="ssl"
class="org.apache.avalon.cornerstone.blocks.sockets.TLSServerSocketFactory">
<keystore>
<file>conf/keystore</file>
<password>secret</password>
<type>JKS</type>
<protocol>TLS</protocol>
<algorithm>SunX509</algorithm>
<authenticate-client>false</authenticate-client>
</keystore>
</factory>
-->
</server-sockets>
<client-sockets>
<factory name="plain"
class="org.apache.avalon.cornerstone.blocks.sockets.DefaultSocketFactory"/>
</client-sockets>
</sockets>
<!-- The Thread Manager block -->
<!-- -->
<!-- The thread manager provides thread pools for use throughout the
server. -->
<!-- -->
<!-- A thread pool with the name "default" must be defined in this
thread manager -->
<!-- configuration. -->
<!-- -->
<!-- Each thread pool is defined with a "thread-group" element. -->
<!-- Each of these elements has the following required sub-elements: -->
<!-- name - the name of the thread pool, used by other components
to -->
<!-- lookup the thread pool -->
<!-- priority - the thread priority for threads in the pool. This
is -->
<!-- a value between 0 and 10, with 5 being the normal -->
<!-- priority and 10 being the maximum. -->
<!-- is-daemon - whether the threads in the pool are daemon
threads. -->
<!-- max-threads - the maximum number of threads allowed in the
pool. -->
<!-- min-threads - the minimum number of threads allowed in the
pool. (not implemented) -->
<!-- min-spare-threads - (not implemented) -->
<thread-manager>
<thread-group>
<name>default</name>
<priority>5</priority>
<is-daemon>false</is-daemon>
<max-threads>100</max-threads>
<min-threads>20</min-threads>
<min-spare-threads>20</min-spare-threads>
</thread-group>
</thread-manager>
</config>
--
Anthony R. Borrow, SJ
Our Lady of Guadalupe Parish
1321 El Paso Street
San Antonio, Texas 78207-5599
(210) 226-4064
(435) 304-2938 (Fax)
http://www.arborrow.org/
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: Upgrade from 2.1 to 2.2 - Fetchmail
Posted by Anthony Borrow <ar...@jesuits.net>.
I was able to correct the config.xml file. As I compared the 2.1 to 2.2
versions of the config files there were some significant differences. I
would suggest that the FAQ section on upgrading to a new version of
James be revised so that new additions to the config.xml are not lost in
step #3. Currently it reads:
1. Rename the previous james directory into a james.old
2. Run phoenix to let the new james.sar be deployed.
3. *Copy config.xml from james.old to the new deployed james/conf
directory*
4. Replace the var directory by the previous var directory. This will
copy over user accounts, inboxes, spools, and whatever else.
5. Restart James.
It might be better to say something like:
1. Rename the previous james directory into a james.old
2. Run phoenix to let the new james.sar be deployed.
3. *Edit the new config.xml to include customization made in the
previous config.xml *
4. Replace the var directory by the previous var directory. This will
copy over user accounts, inboxes, spools, and whatever else.
5. Restart James.
Peace - Anthony
Anthony Borrow wrote:
> I upgraded from 2.1 to 2.2 (WinXP, J2SDK1.4.2_04) but when I tried to
> restart I get the following error. Any suggestions to help me get me
> up and running James 2.2 would be greatly appreciated.
>
> Two smaller issues that I discovered while upgrading. I had an error
> with the SPOOL table in the MySQL repository - I simply deleted the
> table and was able to work past that error but it might be good to
> document changes made in table structures (v2.2 added a field to the
> SPOOL table). One minor detail that I noticed, the wrapper.conf file
> still lists the Service name as James Mail Server 2.1 - it would also
> be good to get that corrected so that it reads 2.2 as some folks might
> be misled into thinking that they are running 2.1 when in fact they
> are running 2.2.
>
> Peace - Anthony
>
> Using PHOENIX_HOME: C:\james
> Using PHOENIX_TMPDIR: C:\james\temp
> Using JAVA_HOME: c:\j2sdk1.4.2_04
>
> Phoenix 4.0.1
>
> James 2.2.0
> Remote Manager Service started plain:4555
> POP3 Service started plain:110
> SMTP Service started plain:25
> NNTP Service started plain:119
> Fetch POP Disabled
> There was an uncaught exception:
> ---------------------------------------------------------
> --- Message ---
> Failed to start application james.
> --- Stack Trace ---
> org.apache.avalon.phoenix.interfaces.DeploymentException: Failed to
> start application james.
> at
> org.apache.avalon.phoenix.components.deployer.DefaultDeployer.deploy(DefaultDeployer.java:379)
>
> at
> org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.deployFile(DefaultEmbeddor.java:498)
>
> at
> org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.deployFile(DefaultEmbeddor.java:491)
>
> at
> org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.deployFiles(DefaultEmbeddor.java:476)
>
> at
> org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.deployDefaultApplications(DefaultEmbeddor.java:466)
>
> at
> org.apache.avalon.phoenix.components.embeddor.DefaultEmbeddor.execute(DefaultEmbeddor.java:224)
>
> at org.apache.avalon.phoenix.frontends.CLIMain.run(CLIMain.java:158)
> at
> org.apache.avalon.phoenix.frontends.CLIMain.execute(CLIMain.java:144)
> at org.apache.avalon.phoenix.frontends.CLIMain.main(CLIMain.java:102)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at
> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>
> at
> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>
> at java.lang.reflect.Method.invoke(Method.java:324)
> at org.apache.avalon.phoenix.launcher.Main.startup(Main.java:94)
> at org.apache.avalon.phoenix.launcher.Main.main(Main.java:46)
> Caused by: org.apache.avalon.framework.CascadingException: Failed to
> start application james.
> at
> org.apache.avalon.phoenix.components.kernel.DefaultKernel.startup(DefaultKernel.java:195)
>
> at
> org.apache.avalon.phoenix.components.kernel.DefaultKernel.addApplication(DefaultKernel.java:254)
>
> at
> org.apache.avalon.phoenix.components.deployer.DefaultDeployer.deploy(DefaultDeployer.java:353)
>
> ... 14 more
> Caused by: org.apache.avalon.phoenix.interfaces.ApplicationException:
> Component named "fetchmail" failed to pass through the Configuration
> stage. (Reason:
> org.apache.avalon.framework.configuration.ConfigurationException:
> Block named "fetchmail" implements Configurable, but has no
> corresponding in config.xml).
> at
> org.apache.avalon.phoenix.components.application.DefaultApplication.start(DefaultApplication.java:144)
>
> at
> org.apache.avalon.framework.container.ContainerUtil.start(ContainerUtil.java:251)
>
> at
> org.apache.avalon.phoenix.components.kernel.DefaultKernel.startup(DefaultKernel.java:178)
>
> ... 16 more
> *Caused by:
> org.apache.excalibur.containerkit.lifecycle.LifecycleException:
> Component named "fetchmail" failed to pass through the Configuration
> stage. (Reason:
> org.apache.avalon.framework.configuration.ConfigurationException:
> Block named "fetchmail" implements Configurable, but has no
> corresponding in config.xml).
> *
> Below is my config.xml
>
> <?xml version="1.0"?>
> <!-- Configuration file for the Apache Jakarta James server -->
>
> <!-- This file contains important settings that control the behaviour
> -->
> <!-- of all of the services and repositories. -->
>
> <!-- README! -->
>
> <!-- This configuration file is designed to run without alteration for
> simple tests. -->
> <!-- It assumes you have a DNS server on localhost and assigns a root
> password of root. -->
>
> <!-- In case the defaults do not suit you, the items you are most
> likely to need to change -->
> <!-- are preceded by a CHECKME! or CONFIRM? comment in the left
> margin. -->
>
> <!-- For production use you will probably need to make more extensive
> changes, see -->
> <!-- http://james.apache.org/documentation_2_1.html -->
>
> <!-- $Revision: 1.40.2.5 $ Committed on $Date: 2003/05/12 21:10:24 $
> by: $Author: noel $ -->
>
> <config>
> <James>
>
> <!-- CHECKME! -->
> <!-- This is the postmaster email address for this mail server. -->
> <!-- Set this to the appropriate email address for error reports -->
> <!-- If this is set to a non-local email address, the mail server
> -->
> <!-- will still function, but will generate a warning on startup.
> -->
> <postmaster>postmaster@localhost</postmaster>
>
> <!-- servernames identifies the DNS namespace served by this
> instance of James. -->
> <!-- These servernames are used for both matcher/mailet
> processing and SMTP auth -->
> <!-- to determine when a mail is intended for local delivery. -->
> <!-- -->
> <!-- If autodetect is TRUE, James wil attempt to discover its own
> host name AND -->
> <!-- use any explicitly specified servernames. -->
> <!-- If autodetect is FALSE, James will use only the specified
> servernames. -->
> <!-- -->
> <!-- If autodetectIP is not FALSE, James will also allow add the
> IP address for each servername. -->
> <!-- The automatic IP detection is to support RFC 2821, Sec
> 4.1.3, address literals. -->
> <!-- -->
> <!-- To override autodetected server names simply add explicit
> servername elements. -->
> <!-- In most cases this will be necessary. -->
> <!-- By default, the servername 'localhost' is specified. This
> can be removed, if required. -->
> <!-- -->
> <!-- Warning: If you are using fetchpop it is important to
> include the -->
> <!-- fetched domains in the server name list to prevent
> looping. -->
> <servernames autodetect="true" autodetectIP="true">
> <!-- CONFIRM? -->
> <servername>localhost</servername>
> </servernames>
>
> <!-- Set whether user names are case sensitive or case
> insensitive -->
> <!-- Set whether to enable local aliases -->
> <!-- Set whether to enable forwarding -->
> <usernames ignoreCase="true" enableAliases="true"
> enableForwarding="true"/>
>
> <!-- The inbox repository is the location for users inboxes -->
> <!-- Default setting: file based repository - enter path ( use
> "file:///" for absolute) -->
>
> <!-- <inboxRepository>
> <repository destinationURL="file://var/mail/inboxes/"
> type="MAIL"/>
> </inboxRepository> -->
>
> <!-- Alternative inbox repository definition for DB use. -->
> <!-- The format for the destinationURL is
> "db://<data-source>/<table>" -->
> <!-- <data-source> is the datasource name set up in the
> database-connections block, below -->
> <!-- <table> is the name of the table to store user inboxes in -->
> <!-- The user name is used as <repositoryName> for this
> repository config. -->
>
> <inboxRepository>
> <repository destinationURL="db://maildb/inbox/" type="MAIL"/>
> </inboxRepository>
>
>
> <!-- Alternative inbox repository definition for DB use. -->
> <!-- Stores message body in file system, rest in database -->
> <!--
> <inboxRepository>
> <repository destinationURL="dbfile://maildb/inbox/" type="MAIL"/>
> </inboxRepository>
> -->
>
> </James>
>
> <!-- Fetch pop block, fetches mail from POP3 servers and inserts it
> into the incoming spool -->
> <!-- Warning: It is important to prevent mail from looping by
> setting the -->
> <!-- fetched domains in the <servernames> section of the <James>
> block -->
> <!-- above. This block is disabled by
> default. -->
> * <fetchpop enabled="false">
> <!-- You can have as many fetch tasks as you want, but each
> must have a -->
> <!-- unique name by which it identified -->
> <fetch name="mydomain.com">
> <!-- Host name or IP address -->
> <host>mail.mydomain.com</host>
> <!-- Account login username -->
> <user>username</user>
> <!-- Account login password -->
> <password>pass</password>
> <!-- How frequently this account is checked - in
> milliseconds. 600000 is every ten minutes -->
> <interval>600000</interval>
> </fetch> </fetchpop>
> *
>
> <!-- The James Spool Manager block -->
> <!-- -->
> <!-- This block is responsible for processing messages on the spool.
> -->
> <spoolmanager>
> <!-- Number of spool threads -->
> <threads> 10 </threads>
>
> <!-- Set the Java packages from which to load mailets and
> matchers -->
> <mailetpackages>
> <mailetpackage>org.apache.james.transport.mailets</mailetpackage>
> </mailetpackages>
> <matcherpackages>
>
> <matcherpackage>org.apache.james.transport.matchers</matcherpackage>
> </matcherpackages>
>
> <!-- The root processor is a required processor - James routes
> all mail on the spool -->
> <!-- through this processor first. -->
> <!-- -->
> <!-- This configuration is a sample configuration for the root
> processor. -->
> <processor name="root">
>
> <!-- Checks that the email Sender is associated with a valid
> domain. -->
> <!-- Useful for detecting and eliminating spam. -->
> <!-- For this block to function, the spam processor must be
> configured. -->
> <!--
> <mailet match="SenderInFakeDomain" class="ToProcessor">
> <processor> spam </processor>
> </mailet>
> -->
>
> <!-- Important check to avoid looping -->
> <mailet match="RelayLimit=30" class="Null"/>
>
> <!-- White List:
> If you use block lists, you will probably want to check
> for known permitted senders. This is particularly true
> if you use more aggressive block lists, such as SPEWS,
> that are prone to block entire subnets without regard
> for non-spamming senders.
> -->
>
> <!-- specific known senders -->
> <!--
> <mailet match="SenderIs=goodboy@goodhost"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> -->
>
> <!-- People on this list agree to pay a penalty if they send
> spam -->
> <mailet match="InSpammerBlacklist=query.bondedsender.org"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
>
> <!-- E-mail legally required not to be spam (see:
> http://www.habeas.com) -->
> <!--
> <mailet match="HasHabeasWarrantMark" class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> -->
> <!-- End of White List -->
>
> <!-- Check for delivery from a known spam server -->
> <!-- This set of matchers/mailets redirect all emails from
> known -->
> <!-- black holes, open relays, and spam servers to the spam
> processor -->
> <!-- For this set to function properly, the spam processor
> must be configured. -->
> <mailet match="InSpammerBlacklist=dnsbl.njabl.org"
> class="ToProcessor">
> <processor> spam </processor>
> <notice>550 Requested action not taken: rejected - see
> http://njabl.org/ </notice>
> </mailet>
>
> <mailet match="InSpammerBlacklist=relays.ordb.org"
> class="ToProcessor">
> <processor> spam </processor>
> <notice>550 Requested action not taken: rejected - see
> http://www.ordb.org/ </notice>
> </mailet>
>
> <!-- Sample matching to kill a message (send to Null) -->
> <!--
> <mailet match="RecipientIs=badboy@badhost" class="Null"/>
> -->
>
> <!-- Send remaining mails to the transport processor for
> either local or remote delivery -->
> <mailet match="All" class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> </processor>
>
> <!-- The error processor is required. James may internally set
> emails to the -->
> <!-- error state. The error processor is generally invoked when
> there is an -->
> <!-- unexpected error either in the mailet chain or internal to
> James. -->
> <!-- -->
> <!-- By default configuration all email that generates an error
> in placed in -->
> <!-- an error repository. -->
> <processor name="error">
>
> <!-- Logs any messages to the repository specified -->
> <mailet match="All" class="ToRepository">
> <!-- <repositoryPath>
> file://var/mail/error/</repositoryPath> -->
> <!-- An alternative database repository example follows. -->
> <repositoryPath> db://maildb/deadletter/error
> </repositoryPath>
> <passThrough> true </passThrough>
> </mailet>
>
> <!-- If you want to notify the sender their message generated
> an error, uncomment this -->
> <!--
> <mailet match="All" class="NotifySender"/>
> -->
> <!-- If you want to notify the postmaster that a message
> generated an error, uncomment this -->
> <!--
> <mailet match="All" class="NotifyPostmaster"/>
> -->
> </processor>
>
> <!-- Processor CONFIGURATION SAMPLE: transport is a sample custom
> processor for local or -->
> <!-- remote delivery -->
> <processor name="transport">
>
> <!-- Is the recipient is for a local account, deliver it
> locally -->
> <mailet match="RecipientIsLocal" class="LocalDelivery"/>
>
> <!-- If the host is handled by this server and it did not get -->
> <!-- locally delivered, this is an invalid recipient -->
> <mailet match="HostIsLocal" class="ToProcessor">
> <processor>error</processor>
> </mailet>
>
> <!-- CHECKME! -->
> <!-- This is an anti-relay matcher/mailet combination -->
> <!-- -->
> <!-- Emails sent from servers not in the network list are -->
> <!-- rejected as spam. This is one method of preventing your -->
> <!-- server from being used as an open relay. Make sure you
> understand -->
> <!-- how to prevent your server from becoming an open relay
> before -->
> <!-- changing this configuration. -->
> <!-- -->
> <!-- This matcher/mailet combination must come after local
> delivery has -->
> <!-- been performed. Otherwise local users will not be able
> to receive -->
> <!-- email from senders not in this remote address list. -->
> <!-- -->
> <!-- If you are using this matcher/mailet you will probably
> want to -->
> <!-- update the configuration to include your own
> network/addresses. The -->
> <!-- matcher can be configured with a comma separated list of
> IP addresses -->
> <!-- wildcarded IP subnets, and wildcarded hostname subnets. -->
> <!-- e.g. "RemoteAddrNotInNetwork=127.0.0.1, abc.de.*,
> 192.168.0.*" -->
> <!-- -->
> <!-- If you are using SMTP authentication then you can (and
> generally -->
> <!-- should) disable this matcher/mailet pair. -->
> <mailet match="RemoteAddrNotInNetwork=127.0.0.1"
> class="ToProcessor">
> <processor> spam </processor>
> </mailet>
>
> <!-- Attempt remote delivery using the specified repository
> for the spool, -->
> <!-- using delay time to retry delivery and the maximum number
> of retries -->
> <mailet match="All" class="RemoteDelivery">
> <!-- <outgoing> file://var/mail/outgoing/ </outgoing> -->
>
> <!-- alternative database repository example below -->
>
> <outgoing> db://maildb/spool/outgoing </outgoing>
>
>
> <!-- Number of milliseconds between delivery attempts -->
> <delayTime> 21600000 </delayTime>
>
> <!-- Number of failed attempts before returning to the
> sender -->
> <maxRetries> 5 </maxRetries>
>
> <!-- The number of threads that should be trying to deliver
> outgoing messages -->
> <deliveryThreads> 1 </deliveryThreads>
>
> <!-- A single mail server to deliver all outgoing messages.
> -->
> <!-- This is useful if this server is a backup or failover
> machine, -->
> <!-- or if you want all messages to be routed through a
> particular mail server, -->
> <!-- regardless of the email addresses specified in the
> message -->
> <!-- -->
> <!-- The gateway element specifies the gateway SMTP server
> name. -->
> <!-- If your gateway mail server is listening on a port
> other than 25, -->
> <!-- you can set James to connect to it on that port using
> the gatewayPort -->
> <!-- element. -->
> <!--
> <gateway> otherserver.mydomain.com </gateway>
> <gatewayPort>25</gatewayPort>
> -->
> </mailet>
>
> </processor>
>
> <!-- Processor CONFIGURATION SAMPLE: spam is a sample custom
> processor for handling -->
> <!-- spam. -->
> <!-- You can either log these, bounce these, or just ignore them.
> -->
> <processor name="spam">
> <!-- To destroy all messages, uncomment this matcher/mailet
> configuration -->
> <!--
> <mailet match="All" class="Null"/>
> -->
>
> <!-- To notify the sender their message was marked as spam,
> uncomment this matcher/mailet configuration -->
> <!--
> <mailet match="All" class="NotifySender"/>
> -->
>
> <!-- To notify the postmaster that a message was marked as
> spam, uncomment this matcher/mailet configuration -->
> <!--
> <mailet match="All" class="NotifyPostmaster"/>
> -->
>
> <!-- To log the message to a repository, this matcher/mailet
> configuration should be uncommented. -->
> <!-- This is the default configuration. -->
> <mailet match="All" class="ToRepository">
> <!-- <repositoryPath>file://var/mail/spam/</repositoryPath>
> -->
> <!-- Changing the repositoryPath, as in this commented out
> example, will -->
> <!-- cause the mails to be stored in a database
> repository. -->
> <!-- Please note that only one repositoryPath element can
> be present for the mailet -->
> <!-- configuration. -->
>
> <repositoryPath> db://maildb/deadletter/spam </repositoryPath>
>
> </mailet>
> </processor>
> </spoolmanager>
>
> <!-- DNS Server Block -->
> <!-- -->
> <!-- Specifies DNS Server information for use by various components
> inside -->
> <!-- James. -->
> <!-- -->
> <!-- Information includes a list of DNS Servers to be used by
> James. These are -->
> <!-- specified by the server elements, each of which is a child
> element of the -->
> <!-- servers element. Each server element is the IP address of a
> single DNS server. -->
> <!-- The servers element can have multiple server children. -->
> <dnsserver>
> <servers>
> <!-- CONFIRM? -->
> <!--Enter ip address of your DNS server, one IP address per
> server -->
> <!-- element. The default configuration assumes a DNS server
> on the localhost. -->
> <server>127.0.0.1</server>
> </servers>
> <authoritative>false</authoritative>
> </dnsserver>
>
> <remotemanager>
> <port>4555</port>
> <!-- Uncomment this if you want to bind to a specific
> inetaddress -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <!--
> <useTLS>true</useTLS>
> -->
> <handler>
> <!-- This is the name used by the server to identify itself in
> the RemoteManager -->
> <!-- protocol. If autodetect is TRUE, the server will
> discover its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is
> FALSE, James -->
> <!-- will use the specified value. -->
> <helloName autodetect="true">myMailServer</helloName>
> <administrator_accounts>
> <!-- CHECKME! -->
> <!-- Change the default login/password. -->
> <account login="arborrow" password="[PASSWORD]"/>
> </administrator_accounts>
> <connectiontimeout> 60000 </connectiontimeout>
> </handler>
> </remotemanager>
>
> <!-- The POP3 server is enabled by default -->
> <!-- Disabling blocks will stop them from listening, -->
> <!-- but does not free as many resources as removing them would -->
> <pop3server enabled="true">
> <!-- port 995 is the well-known/IANA registered port for POP3S
> ie over SSL/TLS -->
> <!-- port 110 is the well-known/IANA registered port for Standard
> POP3 -->
> <port>110</port>
>
> <!-- Uncomment this if you want to bind to a specific inetaddress
> -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <!--
> <useTLS>true</useTLS>
> -->
>
> <handler>
> <!-- This is the name used by the server to identify itself in
> the POP3 -->
> <!-- protocol. If autodetect is TRUE, the server will
> discover its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is
> FALSE, James -->
> <!-- will use the specified value. -->
> <helloName autodetect="true">myMailServer</helloName>
> <connectiontimeout>120000</connectiontimeout>
> </handler>
> </pop3server>
>
> <!-- The SMTP server is enabled by default -->
> <!-- Disabling blocks will stop them from listening, -->
> <!-- but does not free as many resources as removing them would -->
> <smtpserver enabled="true">
> <!-- port 25 is the well-known/IANA registered port for SMTP -->
> <port>25</port>
>
> <!-- Uncomment this if you want to bind to a specific inetaddress
> -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <!--
> <useTLS>true</useTLS>
> -->
>
> <handler>
> <!-- This is the name used by the server to identify itself in
> the SMTP -->
> <!-- protocol. If autodetect is TRUE, the server will
> discover its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is
> FALSE, James -->
> <!-- will use the specified value. -->
> <helloName autodetect="true">myMailServer</helloName>
> <connectiontimeout>360000</connectiontimeout>
>
> <!-- Uncomment this if you want to require SMTP
> authentication. -->
>
> <authRequired>true</authRequired>
>
>
> <!-- Uncomment this if you want to verify sender addresses,
> ensuring that -->
> <!-- the sender address matches the user who has
> authenticated. -->
> <!-- This prevents a user of your mail server from acting as
> someone else -->
>
> <!-- <verifyIdentity>true</verifyIdentity> -->
>
>
> <!-- This sets the maximum allowed message size (in
> kilobytes) for this -->
> <!-- SMTP service. If unspecified, the value defaults to 0,
> which means no limit. -->
> <maxmessagesize>0</maxmessagesize>
> </handler>
> </smtpserver>
>
> <!-- The NNTP server is enabled by default -->
> <!-- Disabling blocks will stop them from listening, -->
> <!-- but does not free as many resources as removing them would -->
> <!-- NNTP-specific: if you disable the NNTP Server, you should also
> set the nntp-repository's
> threadCount to 0, otherwise there will be threads active and
> polling -->
> <nntpserver enabled="true">
> <!-- THE NNTP PROTOCOL IS EXPERIMENTAL AND NOT AS WELL TESTED AS
> SMTP AND POP3 IN THIS RELEASE.
> The James project recommends that you check the James web site
> for updates to the NNTP
> service. -->
> <!-- port 563 is the well-known/IANA registered port for NNTP
> over SSL/TLS -->
> <!-- port 119 is the well-known/IANA registered port for Standard
> NNTP -->
> <port>119</port>
>
> <!-- Uncomment this if you want to bind to a specific inetaddress
> -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <!--
> <useTLS>true</useTLS>
> -->
>
> <handler>
> <!-- This is the name used by the server to identify itself in
> the NNTP -->
> <!-- protocol. If autodetect is TRUE, the server will
> discover its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is
> FALSE, James -->
> <!-- will use the specified value. -->
> <helloName autodetect="true">myMailServer</helloName>
> <connectiontimeout>120000</connectiontimeout>
> <!-- Set the authRequired value to true to enable
> authenticated NNTP -->
> <authRequired>false</authRequired>
> </handler>
> </nntpserver>
>
> <nntp-repository>
> <!-- If this is set to true, posting will be disallowed. -->
> <readOnly>false</readOnly>
>
> <rootPath>file://var/nntp/groups</rootPath>
> <tempPath>file://var/nntp/temp</tempPath>
> <articleIDPath>file://var/nntp/articleid</articleIDPath>
> <articleIDDomainSuffix>news.james.apache.org</articleIDDomainSuffix>
>
> <!-- The news groups hosted in this NNTP repository. -->
> <newsgroups>
> <newsgroup>org.apache.james.dev</newsgroup>
> <newsgroup>org.apache.james.user</newsgroup>
> <newsgroup>org.apache.avalon.dev</newsgroup>
> <newsgroup>org.apache.avalon.user</newsgroup>
> </newsgroups>
>
> <spool>
> <configuration>
> <spoolPath>file://var/nntp/spool</spoolPath>
> <!-- The number of threads that process spooler related
> tasks. -->
> <threadCount>1</threadCount>
> <!-- The spool thread(s) should idle for some time, if it
> has nothing to do -->
> <threadIdleTime>60000</threadIdleTime>
> </configuration>
> </spool>
> </nntp-repository>
>
> <!-- The Mailstore block -->
> <mailstore>
> <repositories>
>
> <!-- File based repositories. These repositories store all
> message data -->
> <!-- in the file system. -->
> <repository
> class="org.apache.james.mailrepository.AvalonMailRepository">
> <protocols>
> <protocol>file</protocol>
> </protocols>
> <types>
> <type>MAIL</type>
> </types>
> </repository>
> <repository
> class="org.apache.james.mailrepository.AvalonSpoolRepository">
> <protocols>
> <protocol>file</protocol>
> </protocols>
> <types>
> <type>SPOOL</type>
> </types>
> </repository>
>
> <!-- JDBC based repositories. These repositories store all
> message data -->
> <!-- in the database. -->
> <repository
> class="org.apache.james.mailrepository.JDBCMailRepository">
> <protocols>
> <protocol>db</protocol>
> </protocols>
> <types>
> <type>MAIL</type>
> </types>
> <config>
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> </config>
> </repository>
>
> <repository
> class="org.apache.james.mailrepository.JDBCSpoolRepository">
> <protocols>
> <protocol>db</protocol>
> </protocols>
> <types>
> <type>SPOOL</type>
> </types>
> <config>
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> </config>
> </repository>
>
> <!-- These repositories store message delivery and headers in
> the DB, and the body to the filesystem -->
> <repository
> class="org.apache.james.mailrepository.JDBCMailRepository">
> <protocols>
> <protocol>dbfile</protocol>
> </protocols>
> <types>
> <type>MAIL</type>
> </types>
> <config>
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> <filestore>file://var/dbmail</filestore>
> </config>
> </repository>
>
> <repository
> class="org.apache.james.mailrepository.JDBCSpoolRepository">
> <protocols>
> <protocol>dbfile</protocol>
> </protocols>
> <types>
> <type>SPOOL</type>
> </types>
> <config>
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> <filestore>file://var/dbmail</filestore>
> </config>
> </repository>
> </repositories>
>
> <!-- Spool repository configuration -->
> <!-- The spool repository is the location where incoming mails
> are temporarily stored -->
> <!-- before being processed. -->
> <!-- <spoolRepository>
> <repository destinationURL="file://var/mail/spool/"
> type="SPOOL"/>
> </spoolRepository>
> -->
>
> <!-- Alternative spool repository definition for JDBC use -->
>
> <spoolRepository>
> <repository destinationURL="db://maildb/spool/spool"
> type="SPOOL"/>
> </spoolRepository>
>
>
> <!-- Alternative spool repository definition for JDBC use -->
> <!-- Stores message body in file system, rest in database -->
> <!--
> <spoolRepository>
> <repository destinationURL="dbfile://maildb/spool/spool"
> type="SPOOL"/>
> </spoolRepository>
> -->
> </mailstore>
>
>
> <!-- The User Storage block -->
> <users-store>
> <!-- Configure User Repositories here. -->
> <!-- -->
> <!-- User repositories are required for the following purposes: -->
> <!-- - storing James user information, including forwards,
> aliases, -->
> <!-- and authentication data. -->
> <!-- - holding lists of users for the listserv mailet -->
> <!-- Currently, two different storage options are available: -->
> <!-- - file-based storage using Java serialization -->
> <!-- - database-backed storage -->
> <!-- (Use of database or file-system is defined on a
> "per-repository" basis) -->
> <!-- -->
> <!-- Note: One user repository is required for James: -->
> <!-- LocalUsers - the users for whom you are providing POP3,
> NNTP, or SMTP service -->
> <!-- -->
> <!-- Other repositories may be used by matchers or mailets. -->
>
> <!-- Default: File-based user repositories Use these
> configurations to store user info in the filesystem -->
> <!-- The LocalUsers repository, for storing James' User info. -->
>
> <!-- <repository name="LocalUsers"
> class="org.apache.james.userrepository.UsersFileRepository">
> <destination URL="file://var/users/"/>
> </repository>
> -->
>
> <!-- Database backed user repositories -->
> <!-- -->
> <!-- Use these configurations to store user info in a database. -->
> <!-- Note: The <data-source> element must refer to a connection
> configured -->
> <!-- in the <database-connections> configuration section. -->
>
> <!-- The LocalUsers repository, for storing James' User info. -->
>
> <repository name="LocalUsers"
> class="org.apache.james.userrepository.JamesUsersJdbcRepository"
> destinationURL="db://maildb/users">
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> </repository>
>
>
> </users-store>
>
> <!-- The database-connections block -->
> <database-connections>
> <!-- These connections are referred to by name elsewhere in the
> config file -->
> <!-- CHECKME! -->
> <!-- To allow James to use a database you must configure the
> database connection here. -->
> <!-- If you are not using a database, you can leave this section
> unchanged. -->
> <!-- These connections are referred to by name in URLs elsewhere
> in the config file. -->
> <data-sources>
>
> <!-- James is distributed with a built in relevant copy of the
> mm.mysql JDBC -->
> <!-- driver. No additional driver is needed for mysql. Read
> the mm.mysql LGPL -->
> <!-- license at
> apps\james\SAR-INF\lib\mm.mysql.LICENCE -->
>
> <!-- JDBC driver .jar libraries for other RDBMS can be placed
> in ~james/lib/ -->
>
> <!-- Example, connecting to a MySQL database called "mail" on
> localhost-->
> <!-- -->
> <!-- The max value is the maximum number of concurrent
> connections James will -->
> <!-- open to this database-->
> <!-- If you see "SQLException: Giving up... no connections
> available." in your -->
> <!-- log files or bounced mail you should increase this value -->
>
> <data-source name="maildb"
> class="org.apache.james.util.mordred.JdbcDataSource">
> <driver>org.gjt.mm.mysql.Driver</driver>
> <dburl>jdbc:mysql://127.0.0.1/james?autoReconnect=true</dburl>
> <user>JAMES_USER</user>
> <password>PASSWORD</password>
> <max>20</max>
> </data-source>
>
>
> <!-- Example, connecting to a Microsoft MSSQL database called
> "mail" on localhost-->
> <!-- -->
> <!-- The max value is the maximum number of concurrent
> connections James will -->
> <!-- open to this database-->
> <!-- If you see "SQLException: Giving up... no connections
> available." in your -->
> <!-- log files or bounced mail you should increase this value -->
> <!--
> <data-source name="maildb"
> class="org.apache.james.util.mordred.JdbcDataSource">
> <driver>com.inet.tds.TdsDriver</driver>
> <dburl>jdbc:inetdae7:127.0.0.1?database=James</dburl>
> <user>sa_james</user>
> <password>blahblah</password>
> <max>20</max>
> </data-source>
> -->
>
> </data-sources>
> </database-connections>
>
> <!-- Configuration for Cornerstone Services -->
> <!-- -->
> <!-- For a simple configuration, nothing beneath this line should
> require -->
> <!-- alteration. -->
> <!-- -->
> <!-- You will need to adjust the Socket Manager service
> configuration if you want -->
> <!-- to enable secure sockets (TLS) for any James
> service. -->
> <!-- -->
> <!-- Complex or high volume configurations may require changes to
> the parameters -->
> <!-- in this section. Please read the James and Avalon
> documentation before -->
> <!-- attempting to adjust this section. -->
> <!-- -->
>
> <!-- The Object Storage block -->
> <!-- -->
> <!-- Defines file storage details that are used for file-based
> repositories. -->
> <objectstorage>
> <repositories>
> <repository
> class="org.apache.james.mailrepository.filepair.File_Persistent_Object_Repository">
>
> <protocols>
> <protocol>file</protocol>
> </protocols>
> <types>
> <type>OBJECT</type>
> </types>
> <models>
> <model>SYNCHRONOUS</model>
> <model>ASYNCHRONOUS</model>
> <model>CACHE</model>
> </models>
> </repository>
>
> <repository
> class="org.apache.james.mailrepository.filepair.File_Persistent_Stream_Repository">
>
> <protocols>
> <protocol>file</protocol>
> </protocols>
> <types>
> <type>STREAM</type>
> </types>
> <models>
> <model>SYNCHRONOUS</model>
> <model>ASYNCHRONOUS</model>
> <model>CACHE</model>
> </models>
> </repository>
> </repositories>
> </objectstorage>
>
> <!-- The Connection Manager block -->
> <!-- -->
> <!-- The idle-timeout is the number of milliseconds that it will
> take for idle -->
> <!-- client connections managed by this connection manager to be
> marked at timed out. -->
> <!-- If no value is specified, the value defaults to 5 minutes,
> 300000 milliseconds -->
> <!-- A value of 0 means that client sockets will not timeout. -->
> <!-- -->
> <!-- The max-connections parameter specifies the default maximum
> number of client -->
> <!-- connections that this connection manager will allow per managed
> server socket. -->
> <!-- This value can be overridden by each individual service. -->
> <!-- If no value is specified, the value defaults to 30. -->
> <!-- A value of 0 means that there is no limit imposed by the
> connection manager, although -->
> <!-- resource limitations imposed by other components (i.e. max # of
> threads) may -->
> <!-- serve to limit the number of open connections. -->
> <!-- -->
> <connections>
> <idle-timeout>300000</idle-timeout>
> <max-connections>30</max-connections>
> </connections>
>
> <!-- The Socket Manager block -->
> <!-- -->
> <!-- The server-sockets element has a number of factory
> sub-elements. -->
> <!-- Each of the factory elements has a name and class attribute -->
> <!-- The name attribute for each factory element must be unique. -->
> <!-- The class attribute is the name of a class that implements the -->
> <!-- interface
> org.apache.avalon.cornerstone.services.ServerSocketFactory -->
> <!-- Specific factory elements may require some sub-elements. This
> is -->
> <!-- factory class dependent. -->
> <!-- -->
> <!-- The client-sockets element has a number of factory
> sub-elements. -->
> <!-- Each of the factory elements has a name and class attribute -->
> <!-- The name attribute for each factory element must be unique. -->
> <!-- The class attribute is the name of a class that implements the -->
> <!-- interface org.apache.avalon.cornerstone.services.SocketFactory -->
> <!-- Specific factory elements may require some sub-elements. This
> is -->
> <!-- factory class dependent. -->
> <!-- -->
> <sockets>
> <server-sockets>
> <factory name="plain"
> class="org.apache.avalon.cornerstone.blocks.sockets.DefaultServerSocketFactory"/>
>
> <!--
> <factory name="ssl"
> class="org.apache.avalon.cornerstone.blocks.sockets.TLSServerSocketFactory">
>
> <keystore>
> <file>conf/keystore</file>
> <password>secret</password>
> <type>JKS</type>
> <protocol>TLS</protocol>
> <algorithm>SunX509</algorithm>
> <authenticate-client>false</authenticate-client>
> </keystore>
> </factory>
> -->
> </server-sockets>
> <client-sockets>
> <factory name="plain"
> class="org.apache.avalon.cornerstone.blocks.sockets.DefaultSocketFactory"/>
>
> </client-sockets>
> </sockets>
>
> <!-- The Thread Manager block -->
> <!-- -->
> <!-- The thread manager provides thread pools for use throughout the
> server. -->
> <!-- -->
> <!-- A thread pool with the name "default" must be defined in this
> thread manager -->
> <!-- configuration. -->
> <!-- -->
> <!-- Each thread pool is defined with a "thread-group" element. -->
> <!-- Each of these elements has the following required sub-elements:
> -->
> <!-- name - the name of the thread pool, used by other components
> to -->
> <!-- lookup the thread pool -->
> <!-- priority - the thread priority for threads in the pool. This
> is -->
> <!-- a value between 0 and 10, with 5 being the normal -->
> <!-- priority and 10 being the maximum. -->
> <!-- is-daemon - whether the threads in the pool are daemon
> threads. -->
> <!-- max-threads - the maximum number of threads allowed in the
> pool. -->
> <!-- min-threads - the minimum number of threads allowed in the
> pool. (not implemented) -->
> <!-- min-spare-threads - (not implemented) -->
> <thread-manager>
> <thread-group>
> <name>default</name>
> <priority>5</priority>
> <is-daemon>false</is-daemon>
> <max-threads>100</max-threads>
> <min-threads>20</min-threads>
> <min-spare-threads>20</min-spare-threads>
> </thread-group>
> </thread-manager>
> </config>
>
--
Anthony R. Borrow, SJ
Our Lady of Guadalupe Parish
1321 El Paso Street
San Antonio, Texas 78207-5599
(210) 226-4064
(435) 304-2938 (Fax)
http://www.arborrow.org/
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
2.1..3 Mysterious Crashing.
Posted by Melroy Drego <me...@mumsonline.com.au>.
Hi All,
My 2.1.3 server, which has served me very well has, for the last couple
of months been crashing.
I've tarred the last couple of post-crash logs in the james directory,
but on examination of all the last ones, can see nothing.
Any Ideas where /what to look out for?
Thanks a lot.
Melroy
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
RE: Upgrade from 2.1 to 2.2 - Fetch
Posted by "Noel J. Bergman" <no...@devtech.com>.
> Component named "fetchmail" failed to pass through the Configuration
> stage. (Reason: ... : Block named "fetchmail" implements Configurable,
> but has no corresponding in config.xml).
It appears that you are using your 2.1 config instead of the 2.2 config with
your changes merged.
--- Noel
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org