You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@jmeter.apache.org by Ginny Dhawan <Gi...@NIIT-Tech.com> on 2014/05/05 14:30:02 UTC
Regarding scheduler in Jmeter
Hello Everyone ,
Could anyone help me out for the below issue.
I have to run the script for 30 mins in jmeter .. M using the scheduler but it stops before completing the 30 mintues.. Maximum it ran the scripts for 12-15 mins not more than this.
I used the runtime controller but no luck ..
Prompt Response would be highly appreciated.
If any information required please let me know.
Best Regards,
Jmeter User
DISCLAIMER
The information transmitted, including any attachments, is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you receive this email by mistake, please advise the sender and delete it immediately. Email transmission cannot be guaranteed to be secure, or error free as information could be intercepted, corrupted, lost or destroyed as a result of the transmission process. Views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Please be aware that the Company monitors email communications through our networks for regulatory compliance purposes. NIIT Technologies Limited and its related entities consider the privacy of its clients to be of utmost importance and works to protect it. The Privacy Policy of the Company can be accessed from our website “www.niit-tech.com. (s).
RE: Regarding scheduler in Jmeter
Posted by ZK <st...@gmail.com>.
Hi,
the settings on your Thread group controller:
'Action to be taken after sampler error'
Determines what happens if a sampler error occurs, either because the sample
itself failed or an assertion failed. The possible choices are:
Continue - ignore the error and continue with the test
Start Next Loop - ignore the error, start next loop and continue with the
test
Stop Thread - current thread exits
Stop Test - the entire test is stopped at the end of any current samples.
Stop Test Now - the entire test is stopped abruptly. Any current samplers
are interrupted if possible
Is this setting set to 'Continue' ?
ZK
--
View this message in context: http://jmeter.512774.n5.nabble.com/Regarding-scheduler-in-Jmeter-tp5719975p5719991.html
Sent from the JMeter - User mailing list archive at Nabble.com.
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org
RE: Regarding scheduler in Jmeter
Posted by Ginny Dhawan <Gi...@NIIT-Tech.com>.
Any Update for below issue ???
________________________________________
From: Ginny Dhawan
Sent: Wednesday, May 07, 2014 2:54 PM
To: JMeter Users List
Subject: RE: Regarding scheduler in Jmeter
Thanks Deepak for your help .
Now , My script is running fine for 30 minutes but still i didnot achive my target i.e constant throughput..
Target : The test will need to maintain a constant throughput of 20 users for 30 mins.
I tried to use the Throughput shaping timer
http://jmeter-plugins.org/wiki/ThroughputShapingTimer/?utm_source=jmeter&utm_medium=helplink&utm_campaign=ThroughputShapingTimer
but i didnt get the relevant response.I think i am doing some wrong in this....Could you please elaborate which values i have to put for Start RPS and End RPS and Durations .
How many rows i have to put for the same in shaping timer.
M sorry i have asked so many questions to you ..
Seriously , your help is appreciated.
Thanks.
________________________________________
From: Deepak Shetty [shettyd@gmail.com]
Sent: Tuesday, May 06, 2014 11:08 PM
To: JMeter Users List
Subject: Re: Regarding scheduler in Jmeter
Your throughput controller is stating total executions 20 - so it will run
twenty times and terminate after that - what are you trying to do?
usually you mean to use the constant throughput timer , not throughput
controller - please read jmeter manual -
http://jmeter.apache.org/usermanual/component_reference.html#Throughput_Controller
On Tue, May 6, 2014 at 3:41 AM, Ginny Dhawan <Gi...@niit-tech.com>wrote:
>
> Thanks Deepak ,
>
> As suggested , I tried all the Option but still no luck ..
>
> Note : Heap Size is also increased
>
> Test Plan
> -Synchronize timer;20
> Thread Group (Thread:20 , Rampup:1 , LoopCount: Forever)
> ThroughputController ( Total Execution , Per user checkbox is
> checked & throughput 20)
> -Sample 1
> -Sample 2
> -Sample 3
> -Sample 4
> Listerners
>
> ...Please Advise ..Its URGENT.
>
>
>
> ________________________________________
> From: Deepak Shetty [shettyd@gmail.com]
> Sent: Monday, May 05, 2014 8:10 PM
> To: JMeter Users List
> Subject: Re: Regarding scheduler in Jmeter
>
> Hi
> Im assuming you have used the scheduler/duration setting ? That will work
> as long as your test itself runs for more than 30 minutes. Whats your loop
> count set in JMeter threadgroup? if its a fixed number then JMeter will
> stop when thats complete - you probably want to say forever if you want
> duration to control how long your test runs(assuming you are fine with
> running the same test repeatedly).
> Note there are other settings that may also cause your test to terminate
> (e.g. setting stop thread on EOF on a CSV data set config or Stop thread on
> error on the Thread group)
> if neither of these then you might want to check jmeter.log for out of
> memory errors etc.
>
>
>
> On Mon, May 5, 2014 at 5:30 AM, Ginny Dhawan <Ginny.Dhawan@niit-tech.com
> >wrote:
>
> > Hello Everyone ,
> >
> >
> >
> > Could anyone help me out for the below issue.
> >
> >
> >
> > I have to run the script for 30 mins in jmeter .. M using the scheduler
> > but it stops before completing the 30 mintues.. Maximum it ran the
> scripts
> > for 12-15 mins not more than this.
> >
> >
> >
> > I used the runtime controller but no luck ..
> >
> >
> >
> >
> >
> > Prompt Response would be highly appreciated.
> >
> >
> >
> > If any information required please let me know.
> >
> >
> >
> >
> >
> > Best Regards,
> >
> > Jmeter User
> >
> >
> >
> >
> >
> >
> > DISCLAIMER
> >
> > The information transmitted, including any attachments, is intended only
> > for the person or entity to which it is addressed and may contain
> > confidential and/or privileged material. Any form of reproduction,
> > dissemination, copying, disclosure, modification, distribution and / or
> > publication of this message without the prior written consent of the
> author
> > of this e-mail is strictly prohibited. If you receive this email by
> > mistake, please advise the sender and delete it immediately. Email
> > transmission cannot be guaranteed to be secure, or error free as
> > information could be intercepted, corrupted, lost or destroyed as a
> result
> > of the transmission process. Views or opinions presented in this email
> are
> > solely those of the author and do not necessarily represent those of the
> > company. Please be aware that the Company monitors email communications
> > through our networks for regulatory compliance purposes. NIIT
> Technologies
> > Limited and its related entities consider the privacy of its clients to
> be
> > of utmost importance and works to protect it. The Privacy Policy of the
> > Company can be accessed from our website “www.niit-tech.com. (s).
> >
>
>
>
>
>
>
> DISCLAIMER
>
> The information transmitted, including any attachments, is intended only
> for the person or entity to which it is addressed and may contain
> confidential and/or privileged material. Any form of reproduction,
> dissemination, copying, disclosure, modification, distribution and / or
> publication of this message without the prior written consent of the author
> of this e-mail is strictly prohibited. If you receive this email by
> mistake, please advise the sender and delete it immediately. Email
> transmission cannot be guaranteed to be secure, or error free as
> information could be intercepted, corrupted, lost or destroyed as a result
> of the transmission process. Views or opinions presented in this email are
> solely those of the author and do not necessarily represent those of the
> company. Please be aware that the Company monitors email communications
> through our networks for regulatory compliance purposes. NIIT Technologies
> Limited and its related entities consider the privacy of its clients to be
> of utmost importance and works to protect it. The Privacy Policy of the
> Company can be accessed from our website “www.niit-tech.com. (s).
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
> For additional commands, e-mail: user-help@jmeter.apache.org
>
>
DISCLAIMER
The information transmitted, including any attachments, is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you receive this email by mistake, please advise the sender and delete it immediately. Email transmission cannot be guaranteed to be secure, or error free as information could be intercepted, corrupted, lost or destroyed as a result of the transmission process. Views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Please be aware that the Company monitors email communications through our networks for regulatory compliance purposes. NIIT Technologies Limited and its related entities consider the privacy of its clients to be of utmost importance and works to protect it. The Privacy Policy of the Company can be accessed from our website “www.niit-tech.com. (s).
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org
RE: Regarding scheduler in Jmeter
Posted by Stephen Townshend <st...@equinox.co.nz>.
Controlling pacing in the traditional load testing sense is not obvious or easy in Jmeter.
You can achieve a simple level of pacing by placing a Constant Throughput Timer in your thread group before your requests. This throughput timer unfortunately is measured in "transactions per minute" which is not intuitive at all (usually we talk about transactions/hour). This will make the total time for each iteration of the script match a certain desired throughput.
The problem is that this isn't very realistic because it will execute exactly every x seconds during the test creating an absolute uniform distribution of load. What you need is some randomisation added to it. What I use is:
- Dummy Test Action (I call it "Pacing") to hold the two objects below:
- - Constant Throughput Timer
- - Uniform Random Timer
The way Jmeter works is that the Uniform Random Timer will calculated in conjunction with the Constant Throughput Timer to provide you a randomised throughput around a certain desired goal.
If the throughput you're seeing isn't what you expect check:
- Is you think time too high? Or more generally, if you want a script to execute once a minute but it takes 3 minutes to complete, you're not going to achieve your desired throughput.
If you could provide a screenshot of one of your scripts along with details of your think-time and how you're trying to achieve the pacing I could tell you exactly what you need to do.
________________________________________
From: Deepak Shetty <sh...@gmail.com>
Sent: Friday, 16 May 2014 7:16 a.m.
To: JMeter Users List
Subject: Re: Regarding scheduler in Jmeter
Since you are using plugins , thats a question for the plugins mailing list
, not the jmeter one
Since you say you want constant throughput start rps = end rps = number of
requests you want per second
duration is same as your test run right? (also i believe you needed to use
the plugin threadgroup , not the jmeter one for this timer)
What you want can be accomplished in JMeter though
ThreadGroup (Duration = 30 minutes , Number of users is a value high enough
to generate the through put you need with some safety built in for long
response times, must be estimated based on your max allowed response time ,
loop count = forever)
+Constant throughput timer
+Request
On Wed, May 7, 2014 at 2:24 AM, Ginny Dhawan <Gi...@niit-tech.com>wrote:
> Thanks Deepak for your help .
>
> Now , My script is running fine for 30 minutes but still i didnot achive
> my target i.e constant throughput..
>
> Target : The test will need to maintain a constant throughput of 20 users
> for 30 mins.
>
> I tried to use the Throughput shaping timer
>
> http://jmeter-plugins.org/wiki/ThroughputShapingTimer/?utm_source=jmeter&utm_medium=helplink&utm_campaign=ThroughputShapingTimer
>
> but i didnt get the relevant response.I think i am doing some wrong in
> this....Could you please elaborate which values i have to put for Start
> RPS and End RPS and Durations .
>
> How many rows i have to put for the same in shaping timer.
>
> M sorry i have asked so many questions to you ..
>
> Seriously , your help is appreciated.
>
> Thanks.
>
>
>
>
> ________________________________________
> From: Deepak Shetty [shettyd@gmail.com]
> Sent: Tuesday, May 06, 2014 11:08 PM
> To: JMeter Users List
> Subject: Re: Regarding scheduler in Jmeter
>
> Your throughput controller is stating total executions 20 - so it will run
> twenty times and terminate after that - what are you trying to do?
> usually you mean to use the constant throughput timer , not throughput
> controller - please read jmeter manual -
>
> http://jmeter.apache.org/usermanual/component_reference.html#Throughput_Controller
>
>
> On Tue, May 6, 2014 at 3:41 AM, Ginny Dhawan <Ginny.Dhawan@niit-tech.com
> >wrote:
>
> >
> > Thanks Deepak ,
> >
> > As suggested , I tried all the Option but still no luck ..
> >
> > Note : Heap Size is also increased
> >
> > Test Plan
> > -Synchronize timer;20
> > Thread Group (Thread:20 , Rampup:1 , LoopCount: Forever)
> > ThroughputController ( Total Execution , Per user checkbox is
> > checked & throughput 20)
> > -Sample 1
> > -Sample 2
> > -Sample 3
> > -Sample 4
> > Listerners
> >
> > ...Please Advise ..Its URGENT.
> >
> >
> >
> > ________________________________________
> > From: Deepak Shetty [shettyd@gmail.com]
> > Sent: Monday, May 05, 2014 8:10 PM
> > To: JMeter Users List
> > Subject: Re: Regarding scheduler in Jmeter
> >
> > Hi
> > Im assuming you have used the scheduler/duration setting ? That will work
> > as long as your test itself runs for more than 30 minutes. Whats your
> loop
> > count set in JMeter threadgroup? if its a fixed number then JMeter will
> > stop when thats complete - you probably want to say forever if you want
> > duration to control how long your test runs(assuming you are fine with
> > running the same test repeatedly).
> > Note there are other settings that may also cause your test to terminate
> > (e.g. setting stop thread on EOF on a CSV data set config or Stop thread
> on
> > error on the Thread group)
> > if neither of these then you might want to check jmeter.log for out of
> > memory errors etc.
> >
> >
> >
> > On Mon, May 5, 2014 at 5:30 AM, Ginny Dhawan <Ginny.Dhawan@niit-tech.com
> > >wrote:
> >
> > > Hello Everyone ,
> > >
> > >
> > >
> > > Could anyone help me out for the below issue.
> > >
> > >
> > >
> > > I have to run the script for 30 mins in jmeter .. M using the
> scheduler
> > > but it stops before completing the 30 mintues.. Maximum it ran the
> > scripts
> > > for 12-15 mins not more than this.
> > >
> > >
> > >
> > > I used the runtime controller but no luck ..
> > >
> > >
> > >
> > >
> > >
> > > Prompt Response would be highly appreciated.
> > >
> > >
> > >
> > > If any information required please let me know.
> > >
> > >
> > >
> > >
> > >
> > > Best Regards,
> > >
> > > Jmeter User
> > >
> > >
> > >
> > >
> > >
> > >
> > > DISCLAIMER
> > >
> > > The information transmitted, including any attachments, is intended
> only
> > > for the person or entity to which it is addressed and may contain
> > > confidential and/or privileged material. Any form of reproduction,
> > > dissemination, copying, disclosure, modification, distribution and / or
> > > publication of this message without the prior written consent of the
> > author
> > > of this e-mail is strictly prohibited. If you receive this email by
> > > mistake, please advise the sender and delete it immediately. Email
> > > transmission cannot be guaranteed to be secure, or error free as
> > > information could be intercepted, corrupted, lost or destroyed as a
> > result
> > > of the transmission process. Views or opinions presented in this email
> > are
> > > solely those of the author and do not necessarily represent those of
> the
> > > company. Please be aware that the Company monitors email communications
> > > through our networks for regulatory compliance purposes. NIIT
> > Technologies
> > > Limited and its related entities consider the privacy of its clients to
> > be
> > > of utmost importance and works to protect it. The Privacy Policy of the
> > > Company can be accessed from our website “www.niit-tech.com. (s).
> > >
> >
> >
> >
> >
> >
> >
> > DISCLAIMER
> >
> > The information transmitted, including any attachments, is intended only
> > for the person or entity to which it is addressed and may contain
> > confidential and/or privileged material. Any form of reproduction,
> > dissemination, copying, disclosure, modification, distribution and / or
> > publication of this message without the prior written consent of the
> author
> > of this e-mail is strictly prohibited. If you receive this email by
> > mistake, please advise the sender and delete it immediately. Email
> > transmission cannot be guaranteed to be secure, or error free as
> > information could be intercepted, corrupted, lost or destroyed as a
> result
> > of the transmission process. Views or opinions presented in this email
> are
> > solely those of the author and do not necessarily represent those of the
> > company. Please be aware that the Company monitors email communications
> > through our networks for regulatory compliance purposes. NIIT
> Technologies
> > Limited and its related entities consider the privacy of its clients to
> be
> > of utmost importance and works to protect it. The Privacy Policy of the
> > Company can be accessed from our website “www.niit-tech.com. (s).
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
> > For additional commands, e-mail: user-help@jmeter.apache.org
> >
> >
>
>
>
>
>
>
> DISCLAIMER
>
> The information transmitted, including any attachments, is intended only
> for the person or entity to which it is addressed and may contain
> confidential and/or privileged material. Any form of reproduction,
> dissemination, copying, disclosure, modification, distribution and / or
> publication of this message without the prior written consent of the author
> of this e-mail is strictly prohibited. If you receive this email by
> mistake, please advise the sender and delete it immediately. Email
> transmission cannot be guaranteed to be secure, or error free as
> information could be intercepted, corrupted, lost or destroyed as a result
> of the transmission process. Views or opinions presented in this email are
> solely those of the author and do not necessarily represent those of the
> company. Please be aware that the Company monitors email communications
> through our networks for regulatory compliance purposes. NIIT Technologies
> Limited and its related entities consider the privacy of its clients to be
> of utmost importance and works to protect it. The Privacy Policy of the
> Company can be accessed from our website “www.niit-tech.com. (s).
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
> For additional commands, e-mail: user-help@jmeter.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org
Re: Regarding scheduler in Jmeter
Posted by Deepak Shetty <sh...@gmail.com>.
Since you are using plugins , thats a question for the plugins mailing list
, not the jmeter one
Since you say you want constant throughput start rps = end rps = number of
requests you want per second
duration is same as your test run right? (also i believe you needed to use
the plugin threadgroup , not the jmeter one for this timer)
What you want can be accomplished in JMeter though
ThreadGroup (Duration = 30 minutes , Number of users is a value high enough
to generate the through put you need with some safety built in for long
response times, must be estimated based on your max allowed response time ,
loop count = forever)
+Constant throughput timer
+Request
On Wed, May 7, 2014 at 2:24 AM, Ginny Dhawan <Gi...@niit-tech.com>wrote:
> Thanks Deepak for your help .
>
> Now , My script is running fine for 30 minutes but still i didnot achive
> my target i.e constant throughput..
>
> Target : The test will need to maintain a constant throughput of 20 users
> for 30 mins.
>
> I tried to use the Throughput shaping timer
>
> http://jmeter-plugins.org/wiki/ThroughputShapingTimer/?utm_source=jmeter&utm_medium=helplink&utm_campaign=ThroughputShapingTimer
>
> but i didnt get the relevant response.I think i am doing some wrong in
> this....Could you please elaborate which values i have to put for Start
> RPS and End RPS and Durations .
>
> How many rows i have to put for the same in shaping timer.
>
> M sorry i have asked so many questions to you ..
>
> Seriously , your help is appreciated.
>
> Thanks.
>
>
>
>
> ________________________________________
> From: Deepak Shetty [shettyd@gmail.com]
> Sent: Tuesday, May 06, 2014 11:08 PM
> To: JMeter Users List
> Subject: Re: Regarding scheduler in Jmeter
>
> Your throughput controller is stating total executions 20 - so it will run
> twenty times and terminate after that - what are you trying to do?
> usually you mean to use the constant throughput timer , not throughput
> controller - please read jmeter manual -
>
> http://jmeter.apache.org/usermanual/component_reference.html#Throughput_Controller
>
>
> On Tue, May 6, 2014 at 3:41 AM, Ginny Dhawan <Ginny.Dhawan@niit-tech.com
> >wrote:
>
> >
> > Thanks Deepak ,
> >
> > As suggested , I tried all the Option but still no luck ..
> >
> > Note : Heap Size is also increased
> >
> > Test Plan
> > -Synchronize timer;20
> > Thread Group (Thread:20 , Rampup:1 , LoopCount: Forever)
> > ThroughputController ( Total Execution , Per user checkbox is
> > checked & throughput 20)
> > -Sample 1
> > -Sample 2
> > -Sample 3
> > -Sample 4
> > Listerners
> >
> > ...Please Advise ..Its URGENT.
> >
> >
> >
> > ________________________________________
> > From: Deepak Shetty [shettyd@gmail.com]
> > Sent: Monday, May 05, 2014 8:10 PM
> > To: JMeter Users List
> > Subject: Re: Regarding scheduler in Jmeter
> >
> > Hi
> > Im assuming you have used the scheduler/duration setting ? That will work
> > as long as your test itself runs for more than 30 minutes. Whats your
> loop
> > count set in JMeter threadgroup? if its a fixed number then JMeter will
> > stop when thats complete - you probably want to say forever if you want
> > duration to control how long your test runs(assuming you are fine with
> > running the same test repeatedly).
> > Note there are other settings that may also cause your test to terminate
> > (e.g. setting stop thread on EOF on a CSV data set config or Stop thread
> on
> > error on the Thread group)
> > if neither of these then you might want to check jmeter.log for out of
> > memory errors etc.
> >
> >
> >
> > On Mon, May 5, 2014 at 5:30 AM, Ginny Dhawan <Ginny.Dhawan@niit-tech.com
> > >wrote:
> >
> > > Hello Everyone ,
> > >
> > >
> > >
> > > Could anyone help me out for the below issue.
> > >
> > >
> > >
> > > I have to run the script for 30 mins in jmeter .. M using the
> scheduler
> > > but it stops before completing the 30 mintues.. Maximum it ran the
> > scripts
> > > for 12-15 mins not more than this.
> > >
> > >
> > >
> > > I used the runtime controller but no luck ..
> > >
> > >
> > >
> > >
> > >
> > > Prompt Response would be highly appreciated.
> > >
> > >
> > >
> > > If any information required please let me know.
> > >
> > >
> > >
> > >
> > >
> > > Best Regards,
> > >
> > > Jmeter User
> > >
> > >
> > >
> > >
> > >
> > >
> > > DISCLAIMER
> > >
> > > The information transmitted, including any attachments, is intended
> only
> > > for the person or entity to which it is addressed and may contain
> > > confidential and/or privileged material. Any form of reproduction,
> > > dissemination, copying, disclosure, modification, distribution and / or
> > > publication of this message without the prior written consent of the
> > author
> > > of this e-mail is strictly prohibited. If you receive this email by
> > > mistake, please advise the sender and delete it immediately. Email
> > > transmission cannot be guaranteed to be secure, or error free as
> > > information could be intercepted, corrupted, lost or destroyed as a
> > result
> > > of the transmission process. Views or opinions presented in this email
> > are
> > > solely those of the author and do not necessarily represent those of
> the
> > > company. Please be aware that the Company monitors email communications
> > > through our networks for regulatory compliance purposes. NIIT
> > Technologies
> > > Limited and its related entities consider the privacy of its clients to
> > be
> > > of utmost importance and works to protect it. The Privacy Policy of the
> > > Company can be accessed from our website “www.niit-tech.com. (s).
> > >
> >
> >
> >
> >
> >
> >
> > DISCLAIMER
> >
> > The information transmitted, including any attachments, is intended only
> > for the person or entity to which it is addressed and may contain
> > confidential and/or privileged material. Any form of reproduction,
> > dissemination, copying, disclosure, modification, distribution and / or
> > publication of this message without the prior written consent of the
> author
> > of this e-mail is strictly prohibited. If you receive this email by
> > mistake, please advise the sender and delete it immediately. Email
> > transmission cannot be guaranteed to be secure, or error free as
> > information could be intercepted, corrupted, lost or destroyed as a
> result
> > of the transmission process. Views or opinions presented in this email
> are
> > solely those of the author and do not necessarily represent those of the
> > company. Please be aware that the Company monitors email communications
> > through our networks for regulatory compliance purposes. NIIT
> Technologies
> > Limited and its related entities consider the privacy of its clients to
> be
> > of utmost importance and works to protect it. The Privacy Policy of the
> > Company can be accessed from our website “www.niit-tech.com. (s).
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
> > For additional commands, e-mail: user-help@jmeter.apache.org
> >
> >
>
>
>
>
>
>
> DISCLAIMER
>
> The information transmitted, including any attachments, is intended only
> for the person or entity to which it is addressed and may contain
> confidential and/or privileged material. Any form of reproduction,
> dissemination, copying, disclosure, modification, distribution and / or
> publication of this message without the prior written consent of the author
> of this e-mail is strictly prohibited. If you receive this email by
> mistake, please advise the sender and delete it immediately. Email
> transmission cannot be guaranteed to be secure, or error free as
> information could be intercepted, corrupted, lost or destroyed as a result
> of the transmission process. Views or opinions presented in this email are
> solely those of the author and do not necessarily represent those of the
> company. Please be aware that the Company monitors email communications
> through our networks for regulatory compliance purposes. NIIT Technologies
> Limited and its related entities consider the privacy of its clients to be
> of utmost importance and works to protect it. The Privacy Policy of the
> Company can be accessed from our website “www.niit-tech.com. (s).
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
> For additional commands, e-mail: user-help@jmeter.apache.org
>
>
RE: Regarding scheduler in Jmeter
Posted by Ginny Dhawan <Gi...@NIIT-Tech.com>.
Thanks Deepak for your help .
Now , My script is running fine for 30 minutes but still i didnot achive my target i.e constant throughput..
Target : The test will need to maintain a constant throughput of 20 users for 30 mins.
I tried to use the Throughput shaping timer
http://jmeter-plugins.org/wiki/ThroughputShapingTimer/?utm_source=jmeter&utm_medium=helplink&utm_campaign=ThroughputShapingTimer
but i didnt get the relevant response.I think i am doing some wrong in this....Could you please elaborate which values i have to put for Start RPS and End RPS and Durations .
How many rows i have to put for the same in shaping timer.
M sorry i have asked so many questions to you ..
Seriously , your help is appreciated.
Thanks.
________________________________________
From: Deepak Shetty [shettyd@gmail.com]
Sent: Tuesday, May 06, 2014 11:08 PM
To: JMeter Users List
Subject: Re: Regarding scheduler in Jmeter
Your throughput controller is stating total executions 20 - so it will run
twenty times and terminate after that - what are you trying to do?
usually you mean to use the constant throughput timer , not throughput
controller - please read jmeter manual -
http://jmeter.apache.org/usermanual/component_reference.html#Throughput_Controller
On Tue, May 6, 2014 at 3:41 AM, Ginny Dhawan <Gi...@niit-tech.com>wrote:
>
> Thanks Deepak ,
>
> As suggested , I tried all the Option but still no luck ..
>
> Note : Heap Size is also increased
>
> Test Plan
> -Synchronize timer;20
> Thread Group (Thread:20 , Rampup:1 , LoopCount: Forever)
> ThroughputController ( Total Execution , Per user checkbox is
> checked & throughput 20)
> -Sample 1
> -Sample 2
> -Sample 3
> -Sample 4
> Listerners
>
> ...Please Advise ..Its URGENT.
>
>
>
> ________________________________________
> From: Deepak Shetty [shettyd@gmail.com]
> Sent: Monday, May 05, 2014 8:10 PM
> To: JMeter Users List
> Subject: Re: Regarding scheduler in Jmeter
>
> Hi
> Im assuming you have used the scheduler/duration setting ? That will work
> as long as your test itself runs for more than 30 minutes. Whats your loop
> count set in JMeter threadgroup? if its a fixed number then JMeter will
> stop when thats complete - you probably want to say forever if you want
> duration to control how long your test runs(assuming you are fine with
> running the same test repeatedly).
> Note there are other settings that may also cause your test to terminate
> (e.g. setting stop thread on EOF on a CSV data set config or Stop thread on
> error on the Thread group)
> if neither of these then you might want to check jmeter.log for out of
> memory errors etc.
>
>
>
> On Mon, May 5, 2014 at 5:30 AM, Ginny Dhawan <Ginny.Dhawan@niit-tech.com
> >wrote:
>
> > Hello Everyone ,
> >
> >
> >
> > Could anyone help me out for the below issue.
> >
> >
> >
> > I have to run the script for 30 mins in jmeter .. M using the scheduler
> > but it stops before completing the 30 mintues.. Maximum it ran the
> scripts
> > for 12-15 mins not more than this.
> >
> >
> >
> > I used the runtime controller but no luck ..
> >
> >
> >
> >
> >
> > Prompt Response would be highly appreciated.
> >
> >
> >
> > If any information required please let me know.
> >
> >
> >
> >
> >
> > Best Regards,
> >
> > Jmeter User
> >
> >
> >
> >
> >
> >
> > DISCLAIMER
> >
> > The information transmitted, including any attachments, is intended only
> > for the person or entity to which it is addressed and may contain
> > confidential and/or privileged material. Any form of reproduction,
> > dissemination, copying, disclosure, modification, distribution and / or
> > publication of this message without the prior written consent of the
> author
> > of this e-mail is strictly prohibited. If you receive this email by
> > mistake, please advise the sender and delete it immediately. Email
> > transmission cannot be guaranteed to be secure, or error free as
> > information could be intercepted, corrupted, lost or destroyed as a
> result
> > of the transmission process. Views or opinions presented in this email
> are
> > solely those of the author and do not necessarily represent those of the
> > company. Please be aware that the Company monitors email communications
> > through our networks for regulatory compliance purposes. NIIT
> Technologies
> > Limited and its related entities consider the privacy of its clients to
> be
> > of utmost importance and works to protect it. The Privacy Policy of the
> > Company can be accessed from our website “www.niit-tech.com. (s).
> >
>
>
>
>
>
>
> DISCLAIMER
>
> The information transmitted, including any attachments, is intended only
> for the person or entity to which it is addressed and may contain
> confidential and/or privileged material. Any form of reproduction,
> dissemination, copying, disclosure, modification, distribution and / or
> publication of this message without the prior written consent of the author
> of this e-mail is strictly prohibited. If you receive this email by
> mistake, please advise the sender and delete it immediately. Email
> transmission cannot be guaranteed to be secure, or error free as
> information could be intercepted, corrupted, lost or destroyed as a result
> of the transmission process. Views or opinions presented in this email are
> solely those of the author and do not necessarily represent those of the
> company. Please be aware that the Company monitors email communications
> through our networks for regulatory compliance purposes. NIIT Technologies
> Limited and its related entities consider the privacy of its clients to be
> of utmost importance and works to protect it. The Privacy Policy of the
> Company can be accessed from our website “www.niit-tech.com. (s).
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
> For additional commands, e-mail: user-help@jmeter.apache.org
>
>
DISCLAIMER
The information transmitted, including any attachments, is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you receive this email by mistake, please advise the sender and delete it immediately. Email transmission cannot be guaranteed to be secure, or error free as information could be intercepted, corrupted, lost or destroyed as a result of the transmission process. Views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Please be aware that the Company monitors email communications through our networks for regulatory compliance purposes. NIIT Technologies Limited and its related entities consider the privacy of its clients to be of utmost importance and works to protect it. The Privacy Policy of the Company can be accessed from our website “www.niit-tech.com. (s).
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org
Re: Regarding scheduler in Jmeter
Posted by Deepak Shetty <sh...@gmail.com>.
Your throughput controller is stating total executions 20 - so it will run
twenty times and terminate after that - what are you trying to do?
usually you mean to use the constant throughput timer , not throughput
controller - please read jmeter manual -
http://jmeter.apache.org/usermanual/component_reference.html#Throughput_Controller
On Tue, May 6, 2014 at 3:41 AM, Ginny Dhawan <Gi...@niit-tech.com>wrote:
>
> Thanks Deepak ,
>
> As suggested , I tried all the Option but still no luck ..
>
> Note : Heap Size is also increased
>
> Test Plan
> -Synchronize timer;20
> Thread Group (Thread:20 , Rampup:1 , LoopCount: Forever)
> ThroughputController ( Total Execution , Per user checkbox is
> checked & throughput 20)
> -Sample 1
> -Sample 2
> -Sample 3
> -Sample 4
> Listerners
>
> ...Please Advise ..Its URGENT.
>
>
>
> ________________________________________
> From: Deepak Shetty [shettyd@gmail.com]
> Sent: Monday, May 05, 2014 8:10 PM
> To: JMeter Users List
> Subject: Re: Regarding scheduler in Jmeter
>
> Hi
> Im assuming you have used the scheduler/duration setting ? That will work
> as long as your test itself runs for more than 30 minutes. Whats your loop
> count set in JMeter threadgroup? if its a fixed number then JMeter will
> stop when thats complete - you probably want to say forever if you want
> duration to control how long your test runs(assuming you are fine with
> running the same test repeatedly).
> Note there are other settings that may also cause your test to terminate
> (e.g. setting stop thread on EOF on a CSV data set config or Stop thread on
> error on the Thread group)
> if neither of these then you might want to check jmeter.log for out of
> memory errors etc.
>
>
>
> On Mon, May 5, 2014 at 5:30 AM, Ginny Dhawan <Ginny.Dhawan@niit-tech.com
> >wrote:
>
> > Hello Everyone ,
> >
> >
> >
> > Could anyone help me out for the below issue.
> >
> >
> >
> > I have to run the script for 30 mins in jmeter .. M using the scheduler
> > but it stops before completing the 30 mintues.. Maximum it ran the
> scripts
> > for 12-15 mins not more than this.
> >
> >
> >
> > I used the runtime controller but no luck ..
> >
> >
> >
> >
> >
> > Prompt Response would be highly appreciated.
> >
> >
> >
> > If any information required please let me know.
> >
> >
> >
> >
> >
> > Best Regards,
> >
> > Jmeter User
> >
> >
> >
> >
> >
> >
> > DISCLAIMER
> >
> > The information transmitted, including any attachments, is intended only
> > for the person or entity to which it is addressed and may contain
> > confidential and/or privileged material. Any form of reproduction,
> > dissemination, copying, disclosure, modification, distribution and / or
> > publication of this message without the prior written consent of the
> author
> > of this e-mail is strictly prohibited. If you receive this email by
> > mistake, please advise the sender and delete it immediately. Email
> > transmission cannot be guaranteed to be secure, or error free as
> > information could be intercepted, corrupted, lost or destroyed as a
> result
> > of the transmission process. Views or opinions presented in this email
> are
> > solely those of the author and do not necessarily represent those of the
> > company. Please be aware that the Company monitors email communications
> > through our networks for regulatory compliance purposes. NIIT
> Technologies
> > Limited and its related entities consider the privacy of its clients to
> be
> > of utmost importance and works to protect it. The Privacy Policy of the
> > Company can be accessed from our website “www.niit-tech.com. (s).
> >
>
>
>
>
>
>
> DISCLAIMER
>
> The information transmitted, including any attachments, is intended only
> for the person or entity to which it is addressed and may contain
> confidential and/or privileged material. Any form of reproduction,
> dissemination, copying, disclosure, modification, distribution and / or
> publication of this message without the prior written consent of the author
> of this e-mail is strictly prohibited. If you receive this email by
> mistake, please advise the sender and delete it immediately. Email
> transmission cannot be guaranteed to be secure, or error free as
> information could be intercepted, corrupted, lost or destroyed as a result
> of the transmission process. Views or opinions presented in this email are
> solely those of the author and do not necessarily represent those of the
> company. Please be aware that the Company monitors email communications
> through our networks for regulatory compliance purposes. NIIT Technologies
> Limited and its related entities consider the privacy of its clients to be
> of utmost importance and works to protect it. The Privacy Policy of the
> Company can be accessed from our website “www.niit-tech.com. (s).
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
> For additional commands, e-mail: user-help@jmeter.apache.org
>
>
RE: Regarding scheduler in Jmeter
Posted by Ginny Dhawan <Gi...@NIIT-Tech.com>.
Thanks Deepak ,
As suggested , I tried all the Option but still no luck ..
Note : Heap Size is also increased
Test Plan
-Synchronize timer;20
Thread Group (Thread:20 , Rampup:1 , LoopCount: Forever)
ThroughputController ( Total Execution , Per user checkbox is checked & throughput 20)
-Sample 1
-Sample 2
-Sample 3
-Sample 4
Listerners
...Please Advise ..Its URGENT.
________________________________________
From: Deepak Shetty [shettyd@gmail.com]
Sent: Monday, May 05, 2014 8:10 PM
To: JMeter Users List
Subject: Re: Regarding scheduler in Jmeter
Hi
Im assuming you have used the scheduler/duration setting ? That will work
as long as your test itself runs for more than 30 minutes. Whats your loop
count set in JMeter threadgroup? if its a fixed number then JMeter will
stop when thats complete - you probably want to say forever if you want
duration to control how long your test runs(assuming you are fine with
running the same test repeatedly).
Note there are other settings that may also cause your test to terminate
(e.g. setting stop thread on EOF on a CSV data set config or Stop thread on
error on the Thread group)
if neither of these then you might want to check jmeter.log for out of
memory errors etc.
On Mon, May 5, 2014 at 5:30 AM, Ginny Dhawan <Gi...@niit-tech.com>wrote:
> Hello Everyone ,
>
>
>
> Could anyone help me out for the below issue.
>
>
>
> I have to run the script for 30 mins in jmeter .. M using the scheduler
> but it stops before completing the 30 mintues.. Maximum it ran the scripts
> for 12-15 mins not more than this.
>
>
>
> I used the runtime controller but no luck ..
>
>
>
>
>
> Prompt Response would be highly appreciated.
>
>
>
> If any information required please let me know.
>
>
>
>
>
> Best Regards,
>
> Jmeter User
>
>
>
>
>
>
> DISCLAIMER
>
> The information transmitted, including any attachments, is intended only
> for the person or entity to which it is addressed and may contain
> confidential and/or privileged material. Any form of reproduction,
> dissemination, copying, disclosure, modification, distribution and / or
> publication of this message without the prior written consent of the author
> of this e-mail is strictly prohibited. If you receive this email by
> mistake, please advise the sender and delete it immediately. Email
> transmission cannot be guaranteed to be secure, or error free as
> information could be intercepted, corrupted, lost or destroyed as a result
> of the transmission process. Views or opinions presented in this email are
> solely those of the author and do not necessarily represent those of the
> company. Please be aware that the Company monitors email communications
> through our networks for regulatory compliance purposes. NIIT Technologies
> Limited and its related entities consider the privacy of its clients to be
> of utmost importance and works to protect it. The Privacy Policy of the
> Company can be accessed from our website “www.niit-tech.com. (s).
>
DISCLAIMER
The information transmitted, including any attachments, is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you receive this email by mistake, please advise the sender and delete it immediately. Email transmission cannot be guaranteed to be secure, or error free as information could be intercepted, corrupted, lost or destroyed as a result of the transmission process. Views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Please be aware that the Company monitors email communications through our networks for regulatory compliance purposes. NIIT Technologies Limited and its related entities consider the privacy of its clients to be of utmost importance and works to protect it. The Privacy Policy of the Company can be accessed from our website “www.niit-tech.com. (s).
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org
Re: Regarding scheduler in Jmeter
Posted by Deepak Shetty <sh...@gmail.com>.
Hi
Im assuming you have used the scheduler/duration setting ? That will work
as long as your test itself runs for more than 30 minutes. Whats your loop
count set in JMeter threadgroup? if its a fixed number then JMeter will
stop when thats complete - you probably want to say forever if you want
duration to control how long your test runs(assuming you are fine with
running the same test repeatedly).
Note there are other settings that may also cause your test to terminate
(e.g. setting stop thread on EOF on a CSV data set config or Stop thread on
error on the Thread group)
if neither of these then you might want to check jmeter.log for out of
memory errors etc.
On Mon, May 5, 2014 at 5:30 AM, Ginny Dhawan <Gi...@niit-tech.com>wrote:
> Hello Everyone ,
>
>
>
> Could anyone help me out for the below issue.
>
>
>
> I have to run the script for 30 mins in jmeter .. M using the scheduler
> but it stops before completing the 30 mintues.. Maximum it ran the scripts
> for 12-15 mins not more than this.
>
>
>
> I used the runtime controller but no luck ..
>
>
>
>
>
> Prompt Response would be highly appreciated.
>
>
>
> If any information required please let me know.
>
>
>
>
>
> Best Regards,
>
> Jmeter User
>
>
>
>
>
>
> DISCLAIMER
>
> The information transmitted, including any attachments, is intended only
> for the person or entity to which it is addressed and may contain
> confidential and/or privileged material. Any form of reproduction,
> dissemination, copying, disclosure, modification, distribution and / or
> publication of this message without the prior written consent of the author
> of this e-mail is strictly prohibited. If you receive this email by
> mistake, please advise the sender and delete it immediately. Email
> transmission cannot be guaranteed to be secure, or error free as
> information could be intercepted, corrupted, lost or destroyed as a result
> of the transmission process. Views or opinions presented in this email are
> solely those of the author and do not necessarily represent those of the
> company. Please be aware that the Company monitors email communications
> through our networks for regulatory compliance purposes. NIIT Technologies
> Limited and its related entities consider the privacy of its clients to be
> of utmost importance and works to protect it. The Privacy Policy of the
> Company can be accessed from our website “www.niit-tech.com. (s).
>