You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@activemq.apache.org by Clebert Suconic <cl...@gmail.com> on 2016/09/13 15:40:48 UTC
[ANNOUNCE] Apache Artemis 1.4.0 Released
Apache ActiveMQ Artemis 1.4.0 has been released.
There are a lot of improvements included in this release:
- Possibility of using a max size for paging, and monitoring disk
sizes and improving flow control
- Interceptors support for MQTT
- Reload configuration support
The artemis sub-project website has been updated:
http://activemq.apache.org/artemis/
For a complete report of changes:
https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
And the documentation can be found here:
https://activemq.apache.org/artemis/docs.html
Regards
Clebert Suconic
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Robbie Gemmell <ro...@gmail.com>.
Adding the right dev@ list back to the recipients this time...read on
below, if you didnt see it elsewhere already ;)
On 13 September 2016 at 22:59, Robbie Gemmell <ro...@gmail.com> wrote:
> The mirrors just replicate whatever is on the main dist repo. They
> take a variable amount of time to update, typically several hours or
> more, as they aren't necessarily on the same update period and their
> update points are also potentially offset from each other. You can
> track mirror ages at https://www.apache.org/mirrors/
>
> I tend to wait up to 24hrs or at least until the vast majority of
> mirrors have updated after putting new artifacts in for mirroring
> before updating the website and actually announcing, unless theres
> some need to expedite the notice in which case letting folks know the
> mirrors won't yet all be up to date is a good idea.
>
> Cleaning up old releases once the new release is mirrored rather than
> at the same time can be a good idea, otherwise theres a period where
> anyone still looking for the existing/old release (still linked from
> the not-yet-updated website) may find it want wont be on the mirror
> they are using as its updated and only has the new one now (which they
> may not know to look for yet).
>
> Robbie
>
> On 13 September 2016 at 22:10, Jim Gomes <e....@gmail.com> wrote:
>> Yes, it'll take some amount of time. Not sure how much. As I was browsing
>> manually, I noticed that there are synchronization errors. Most mirrors had
>> the 1.3.0 version and not the 1.4.0 version (as expected). However, the
>> mirror that I found 1.4.0 on did *not* have 1.3.0. That was surprising. Do
>> the mirrors ditch the older version when a newer one comes online? I'm not
>> sure how that works.
>>
>>
>> On Tue, Sep 13, 2016 at 2:07 PM Clebert Suconic <cl...@gmail.com>
>> wrote:
>>
>>> I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
>>>
>>> I believe it usually takes some time before it syncs them all. I guess
>>> that's normal?
>>>
>>> On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
>>> > Disregard. There seems to be synchronizing issues between the mirrors.
>>> Some
>>> > mirrors have it, some don't. I had to manually browse the mirrors to find
>>> > one that did.
>>> >
>>> > On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
>>> >
>>> >> The download links are still broken. How long before they will be
>>> active?
>>> >>
>>> >>
>>> >> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <
>>> clebert.suconic@gmail.com>
>>> >> wrote:
>>> >>
>>> >>> Apache ActiveMQ Artemis 1.4.0 has been released.
>>> >>>
>>> >>> There are a lot of improvements included in this release:
>>> >>>
>>> >>> - Possibility of using a max size for paging, and monitoring disk
>>> >>> sizes and improving flow control
>>> >>> - Interceptors support for MQTT
>>> >>> - Reload configuration support
>>> >>>
>>> >>> The artemis sub-project website has been updated:
>>> >>>
>>> >>> http://activemq.apache.org/artemis/
>>> >>>
>>> >>>
>>> >>>
>>> >>> For a complete report of changes:
>>> >>>
>>> >>>
>>> >>>
>>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>>> >>>
>>> >>>
>>> >>> And the documentation can be found here:
>>> >>>
>>> >>> https://activemq.apache.org/artemis/docs.html
>>> >>>
>>> >>>
>>> >>>
>>> >>> Regards
>>> >>>
>>> >>>
>>> >>>
>>> >>> Clebert Suconic
>>> >>>
>>> >>
>>>
>>>
>>>
>>> --
>>> Clebert Suconic
>>>
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Robbie Gemmell <ro...@gmail.com>.
Obviously I got the wrong dev list from the dropdown when manually
'fixing' the addresses earlier...oh well, a useful enough FYI about
the mirrors for folks at Qpid too ;)
On 13 September 2016 at 22:59, Robbie Gemmell <ro...@gmail.com> wrote:
> The mirrors just replicate whatever is on the main dist repo. They
> take a variable amount of time to update, typically several hours or
> more, as they aren't necessarily on the same update period and their
> update points are also potentially offset from each other. You can
> track mirror ages at https://www.apache.org/mirrors/
>
> I tend to wait up to 24hrs or at least until the vast majority of
> mirrors have updated after putting new artifacts in for mirroring
> before updating the website and actually announcing, unless theres
> some need to expedite the notice in which case letting folks know the
> mirrors won't yet all be up to date is a good idea.
>
> Cleaning up old releases once the new release is mirrored rather than
> at the same time can be a good idea, otherwise theres a period where
> anyone still looking for the existing/old release (still linked from
> the not-yet-updated website) may find it want wont be on the mirror
> they are using as its updated and only has the new one now (which they
> may not know to look for yet).
>
> Robbie
>
> On 13 September 2016 at 22:10, Jim Gomes <e....@gmail.com> wrote:
>> Yes, it'll take some amount of time. Not sure how much. As I was browsing
>> manually, I noticed that there are synchronization errors. Most mirrors had
>> the 1.3.0 version and not the 1.4.0 version (as expected). However, the
>> mirror that I found 1.4.0 on did *not* have 1.3.0. That was surprising. Do
>> the mirrors ditch the older version when a newer one comes online? I'm not
>> sure how that works.
>>
>>
>> On Tue, Sep 13, 2016 at 2:07 PM Clebert Suconic <cl...@gmail.com>
>> wrote:
>>
>>> I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
>>>
>>> I believe it usually takes some time before it syncs them all. I guess
>>> that's normal?
>>>
>>> On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
>>> > Disregard. There seems to be synchronizing issues between the mirrors.
>>> Some
>>> > mirrors have it, some don't. I had to manually browse the mirrors to find
>>> > one that did.
>>> >
>>> > On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
>>> >
>>> >> The download links are still broken. How long before they will be
>>> active?
>>> >>
>>> >>
>>> >> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <
>>> clebert.suconic@gmail.com>
>>> >> wrote:
>>> >>
>>> >>> Apache ActiveMQ Artemis 1.4.0 has been released.
>>> >>>
>>> >>> There are a lot of improvements included in this release:
>>> >>>
>>> >>> - Possibility of using a max size for paging, and monitoring disk
>>> >>> sizes and improving flow control
>>> >>> - Interceptors support for MQTT
>>> >>> - Reload configuration support
>>> >>>
>>> >>> The artemis sub-project website has been updated:
>>> >>>
>>> >>> http://activemq.apache.org/artemis/
>>> >>>
>>> >>>
>>> >>>
>>> >>> For a complete report of changes:
>>> >>>
>>> >>>
>>> >>>
>>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>>> >>>
>>> >>>
>>> >>> And the documentation can be found here:
>>> >>>
>>> >>> https://activemq.apache.org/artemis/docs.html
>>> >>>
>>> >>>
>>> >>>
>>> >>> Regards
>>> >>>
>>> >>>
>>> >>>
>>> >>> Clebert Suconic
>>> >>>
>>> >>
>>>
>>>
>>>
>>> --
>>> Clebert Suconic
>>>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@qpid.apache.org
For additional commands, e-mail: dev-help@qpid.apache.org
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Robbie Gemmell <ro...@gmail.com>.
The mirrors just replicate whatever is on the main dist repo. They
take a variable amount of time to update, typically several hours or
more, as they aren't necessarily on the same update period and their
update points are also potentially offset from each other. You can
track mirror ages at https://www.apache.org/mirrors/
I tend to wait up to 24hrs or at least until the vast majority of
mirrors have updated after putting new artifacts in for mirroring
before updating the website and actually announcing, unless theres
some need to expedite the notice in which case letting folks know the
mirrors won't yet all be up to date is a good idea.
Cleaning up old releases once the new release is mirrored rather than
at the same time can be a good idea, otherwise theres a period where
anyone still looking for the existing/old release (still linked from
the not-yet-updated website) may find it want wont be on the mirror
they are using as its updated and only has the new one now (which they
may not know to look for yet).
Robbie
On 13 September 2016 at 22:10, Jim Gomes <e....@gmail.com> wrote:
> Yes, it'll take some amount of time. Not sure how much. As I was browsing
> manually, I noticed that there are synchronization errors. Most mirrors had
> the 1.3.0 version and not the 1.4.0 version (as expected). However, the
> mirror that I found 1.4.0 on did *not* have 1.3.0. That was surprising. Do
> the mirrors ditch the older version when a newer one comes online? I'm not
> sure how that works.
>
>
> On Tue, Sep 13, 2016 at 2:07 PM Clebert Suconic <cl...@gmail.com>
> wrote:
>
>> I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
>>
>> I believe it usually takes some time before it syncs them all. I guess
>> that's normal?
>>
>> On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
>> > Disregard. There seems to be synchronizing issues between the mirrors.
>> Some
>> > mirrors have it, some don't. I had to manually browse the mirrors to find
>> > one that did.
>> >
>> > On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
>> >
>> >> The download links are still broken. How long before they will be
>> active?
>> >>
>> >>
>> >> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <
>> clebert.suconic@gmail.com>
>> >> wrote:
>> >>
>> >>> Apache ActiveMQ Artemis 1.4.0 has been released.
>> >>>
>> >>> There are a lot of improvements included in this release:
>> >>>
>> >>> - Possibility of using a max size for paging, and monitoring disk
>> >>> sizes and improving flow control
>> >>> - Interceptors support for MQTT
>> >>> - Reload configuration support
>> >>>
>> >>> The artemis sub-project website has been updated:
>> >>>
>> >>> http://activemq.apache.org/artemis/
>> >>>
>> >>>
>> >>>
>> >>> For a complete report of changes:
>> >>>
>> >>>
>> >>>
>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>> >>>
>> >>>
>> >>> And the documentation can be found here:
>> >>>
>> >>> https://activemq.apache.org/artemis/docs.html
>> >>>
>> >>>
>> >>>
>> >>> Regards
>> >>>
>> >>>
>> >>>
>> >>> Clebert Suconic
>> >>>
>> >>
>>
>>
>>
>> --
>> Clebert Suconic
>>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@qpid.apache.org
For additional commands, e-mail: dev-help@qpid.apache.org
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Robbie Gemmell <ro...@gmail.com>.
The mirrors just replicate whatever is on the main dist repo. They
take a variable amount of time to update, typically several hours or
more, as they aren't necessarily on the same update period and their
update points are also potentially offset from each other. You can
track mirror ages at https://www.apache.org/mirrors/
I tend to wait up to 24hrs or at least until the vast majority of
mirrors have updated after putting new artifacts in for mirroring
before updating the website and actually announcing, unless theres
some need to expedite the notice in which case letting folks know the
mirrors won't yet all be up to date is a good idea.
Cleaning up old releases once the new release is mirrored rather than
at the same time can be a good idea, otherwise theres a period where
anyone still looking for the existing/old release (still linked from
the not-yet-updated website) may find it want wont be on the mirror
they are using as its updated and only has the new one now (which they
may not know to look for yet).
Robbie
On 13 September 2016 at 22:10, Jim Gomes <e....@gmail.com> wrote:
> Yes, it'll take some amount of time. Not sure how much. As I was browsing
> manually, I noticed that there are synchronization errors. Most mirrors had
> the 1.3.0 version and not the 1.4.0 version (as expected). However, the
> mirror that I found 1.4.0 on did *not* have 1.3.0. That was surprising. Do
> the mirrors ditch the older version when a newer one comes online? I'm not
> sure how that works.
>
>
> On Tue, Sep 13, 2016 at 2:07 PM Clebert Suconic <cl...@gmail.com>
> wrote:
>
>> I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
>>
>> I believe it usually takes some time before it syncs them all. I guess
>> that's normal?
>>
>> On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
>> > Disregard. There seems to be synchronizing issues between the mirrors.
>> Some
>> > mirrors have it, some don't. I had to manually browse the mirrors to find
>> > one that did.
>> >
>> > On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
>> >
>> >> The download links are still broken. How long before they will be
>> active?
>> >>
>> >>
>> >> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <
>> clebert.suconic@gmail.com>
>> >> wrote:
>> >>
>> >>> Apache ActiveMQ Artemis 1.4.0 has been released.
>> >>>
>> >>> There are a lot of improvements included in this release:
>> >>>
>> >>> - Possibility of using a max size for paging, and monitoring disk
>> >>> sizes and improving flow control
>> >>> - Interceptors support for MQTT
>> >>> - Reload configuration support
>> >>>
>> >>> The artemis sub-project website has been updated:
>> >>>
>> >>> http://activemq.apache.org/artemis/
>> >>>
>> >>>
>> >>>
>> >>> For a complete report of changes:
>> >>>
>> >>>
>> >>>
>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>> >>>
>> >>>
>> >>> And the documentation can be found here:
>> >>>
>> >>> https://activemq.apache.org/artemis/docs.html
>> >>>
>> >>>
>> >>>
>> >>> Regards
>> >>>
>> >>>
>> >>>
>> >>> Clebert Suconic
>> >>>
>> >>
>>
>>
>>
>> --
>> Clebert Suconic
>>
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Jim Gomes <e....@gmail.com>.
Yes, it'll take some amount of time. Not sure how much. As I was browsing
manually, I noticed that there are synchronization errors. Most mirrors had
the 1.3.0 version and not the 1.4.0 version (as expected). However, the
mirror that I found 1.4.0 on did *not* have 1.3.0. That was surprising. Do
the mirrors ditch the older version when a newer one comes online? I'm not
sure how that works.
On Tue, Sep 13, 2016 at 2:07 PM Clebert Suconic <cl...@gmail.com>
wrote:
> I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
>
> I believe it usually takes some time before it syncs them all. I guess
> that's normal?
>
> On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
> > Disregard. There seems to be synchronizing issues between the mirrors.
> Some
> > mirrors have it, some don't. I had to manually browse the mirrors to find
> > one that did.
> >
> > On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
> >
> >> The download links are still broken. How long before they will be
> active?
> >>
> >>
> >> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <
> clebert.suconic@gmail.com>
> >> wrote:
> >>
> >>> Apache ActiveMQ Artemis 1.4.0 has been released.
> >>>
> >>> There are a lot of improvements included in this release:
> >>>
> >>> - Possibility of using a max size for paging, and monitoring disk
> >>> sizes and improving flow control
> >>> - Interceptors support for MQTT
> >>> - Reload configuration support
> >>>
> >>> The artemis sub-project website has been updated:
> >>>
> >>> http://activemq.apache.org/artemis/
> >>>
> >>>
> >>>
> >>> For a complete report of changes:
> >>>
> >>>
> >>>
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
> >>>
> >>>
> >>> And the documentation can be found here:
> >>>
> >>> https://activemq.apache.org/artemis/docs.html
> >>>
> >>>
> >>>
> >>> Regards
> >>>
> >>>
> >>>
> >>> Clebert Suconic
> >>>
> >>
>
>
>
> --
> Clebert Suconic
>
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Clebert Suconic <cl...@gmail.com>.
Ok. I will wait next time :)
On Tuesday, September 13, 2016, Timothy Bish <ta...@gmail.com> wrote:
> On 09/13/2016 05:07 PM, Clebert Suconic wrote:
>
>> I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
>>
>> I believe it usually takes some time before it syncs them all. I guess
>> that's normal?
>>
>
> It can take as long as 24 hrs for all the mirrors to sync. That's why
> it's a good idea to publish the artifacts but not announce right away so
> that folks don't do to the download page and hit dead links.
>
>
>> On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
>>
>>> Disregard. There seems to be synchronizing issues between the mirrors.
>>> Some
>>> mirrors have it, some don't. I had to manually browse the mirrors to find
>>> one that did.
>>>
>>> On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
>>>
>>> The download links are still broken. How long before they will be active?
>>>>
>>>>
>>>> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <
>>>> clebert.suconic@gmail.com>
>>>> wrote:
>>>>
>>>> Apache ActiveMQ Artemis 1.4.0 has been released.
>>>>>
>>>>> There are a lot of improvements included in this release:
>>>>>
>>>>> - Possibility of using a max size for paging, and monitoring disk
>>>>> sizes and improving flow control
>>>>> - Interceptors support for MQTT
>>>>> - Reload configuration support
>>>>>
>>>>> The artemis sub-project website has been updated:
>>>>>
>>>>> http://activemq.apache.org/artemis/
>>>>>
>>>>>
>>>>>
>>>>> For a complete report of changes:
>>>>>
>>>>>
>>>>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?proje
>>>>> ctId=12315920&version=12336052
>>>>>
>>>>>
>>>>> And the documentation can be found here:
>>>>>
>>>>> https://activemq.apache.org/artemis/docs.html
>>>>>
>>>>>
>>>>>
>>>>> Regards
>>>>>
>>>>>
>>>>>
>>>>> Clebert Suconic
>>>>>
>>>>>
>>
>>
>
> --
> Tim Bish
> twitter: @tabish121
> blog: http://timbish.blogspot.com/
>
>
--
Clebert Suconic
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Timothy Bish <ta...@gmail.com>.
On 09/13/2016 05:07 PM, Clebert Suconic wrote:
> I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
>
> I believe it usually takes some time before it syncs them all. I guess
> that's normal?
It can take as long as 24 hrs for all the mirrors to sync. That's why
it's a good idea to publish the artifacts but not announce right away so
that folks don't do to the download page and hit dead links.
>
> On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
>> Disregard. There seems to be synchronizing issues between the mirrors. Some
>> mirrors have it, some don't. I had to manually browse the mirrors to find
>> one that did.
>>
>> On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
>>
>>> The download links are still broken. How long before they will be active?
>>>
>>>
>>> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <cl...@gmail.com>
>>> wrote:
>>>
>>>> Apache ActiveMQ Artemis 1.4.0 has been released.
>>>>
>>>> There are a lot of improvements included in this release:
>>>>
>>>> - Possibility of using a max size for paging, and monitoring disk
>>>> sizes and improving flow control
>>>> - Interceptors support for MQTT
>>>> - Reload configuration support
>>>>
>>>> The artemis sub-project website has been updated:
>>>>
>>>> http://activemq.apache.org/artemis/
>>>>
>>>>
>>>>
>>>> For a complete report of changes:
>>>>
>>>>
>>>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>>>>
>>>>
>>>> And the documentation can be found here:
>>>>
>>>> https://activemq.apache.org/artemis/docs.html
>>>>
>>>>
>>>>
>>>> Regards
>>>>
>>>>
>>>>
>>>> Clebert Suconic
>>>>
>
>
--
Tim Bish
twitter: @tabish121
blog: http://timbish.blogspot.com/
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Jim Gomes <e....@gmail.com>.
Yes, it'll take some amount of time. Not sure how much. As I was browsing
manually, I noticed that there are synchronization errors. Most mirrors had
the 1.3.0 version and not the 1.4.0 version (as expected). However, the
mirror that I found 1.4.0 on did *not* have 1.3.0. That was surprising. Do
the mirrors ditch the older version when a newer one comes online? I'm not
sure how that works.
On Tue, Sep 13, 2016 at 2:07 PM Clebert Suconic <cl...@gmail.com>
wrote:
> I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
>
> I believe it usually takes some time before it syncs them all. I guess
> that's normal?
>
> On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
> > Disregard. There seems to be synchronizing issues between the mirrors.
> Some
> > mirrors have it, some don't. I had to manually browse the mirrors to find
> > one that did.
> >
> > On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
> >
> >> The download links are still broken. How long before they will be
> active?
> >>
> >>
> >> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <
> clebert.suconic@gmail.com>
> >> wrote:
> >>
> >>> Apache ActiveMQ Artemis 1.4.0 has been released.
> >>>
> >>> There are a lot of improvements included in this release:
> >>>
> >>> - Possibility of using a max size for paging, and monitoring disk
> >>> sizes and improving flow control
> >>> - Interceptors support for MQTT
> >>> - Reload configuration support
> >>>
> >>> The artemis sub-project website has been updated:
> >>>
> >>> http://activemq.apache.org/artemis/
> >>>
> >>>
> >>>
> >>> For a complete report of changes:
> >>>
> >>>
> >>>
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
> >>>
> >>>
> >>> And the documentation can be found here:
> >>>
> >>> https://activemq.apache.org/artemis/docs.html
> >>>
> >>>
> >>>
> >>> Regards
> >>>
> >>>
> >>>
> >>> Clebert Suconic
> >>>
> >>
>
>
>
> --
> Clebert Suconic
>
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Clebert Suconic <cl...@gmail.com>.
I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
I believe it usually takes some time before it syncs them all. I guess
that's normal?
On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
> Disregard. There seems to be synchronizing issues between the mirrors. Some
> mirrors have it, some don't. I had to manually browse the mirrors to find
> one that did.
>
> On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
>
>> The download links are still broken. How long before they will be active?
>>
>>
>> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <cl...@gmail.com>
>> wrote:
>>
>>> Apache ActiveMQ Artemis 1.4.0 has been released.
>>>
>>> There are a lot of improvements included in this release:
>>>
>>> - Possibility of using a max size for paging, and monitoring disk
>>> sizes and improving flow control
>>> - Interceptors support for MQTT
>>> - Reload configuration support
>>>
>>> The artemis sub-project website has been updated:
>>>
>>> http://activemq.apache.org/artemis/
>>>
>>>
>>>
>>> For a complete report of changes:
>>>
>>>
>>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>>>
>>>
>>> And the documentation can be found here:
>>>
>>> https://activemq.apache.org/artemis/docs.html
>>>
>>>
>>>
>>> Regards
>>>
>>>
>>>
>>> Clebert Suconic
>>>
>>
--
Clebert Suconic
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Clebert Suconic <cl...@gmail.com>.
I tested before sending the ANNOUNCE, but I guess not all mirrors have it.
I believe it usually takes some time before it syncs them all. I guess
that's normal?
On Tue, Sep 13, 2016 at 4:55 PM, Jim Gomes <jg...@apache.org> wrote:
> Disregard. There seems to be synchronizing issues between the mirrors. Some
> mirrors have it, some don't. I had to manually browse the mirrors to find
> one that did.
>
> On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
>
>> The download links are still broken. How long before they will be active?
>>
>>
>> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <cl...@gmail.com>
>> wrote:
>>
>>> Apache ActiveMQ Artemis 1.4.0 has been released.
>>>
>>> There are a lot of improvements included in this release:
>>>
>>> - Possibility of using a max size for paging, and monitoring disk
>>> sizes and improving flow control
>>> - Interceptors support for MQTT
>>> - Reload configuration support
>>>
>>> The artemis sub-project website has been updated:
>>>
>>> http://activemq.apache.org/artemis/
>>>
>>>
>>>
>>> For a complete report of changes:
>>>
>>>
>>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>>>
>>>
>>> And the documentation can be found here:
>>>
>>> https://activemq.apache.org/artemis/docs.html
>>>
>>>
>>>
>>> Regards
>>>
>>>
>>>
>>> Clebert Suconic
>>>
>>
--
Clebert Suconic
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Jim Gomes <jg...@apache.org>.
Disregard. There seems to be synchronizing issues between the mirrors. Some
mirrors have it, some don't. I had to manually browse the mirrors to find
one that did.
On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
> The download links are still broken. How long before they will be active?
>
>
> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <cl...@gmail.com>
> wrote:
>
>> Apache ActiveMQ Artemis 1.4.0 has been released.
>>
>> There are a lot of improvements included in this release:
>>
>> - Possibility of using a max size for paging, and monitoring disk
>> sizes and improving flow control
>> - Interceptors support for MQTT
>> - Reload configuration support
>>
>> The artemis sub-project website has been updated:
>>
>> http://activemq.apache.org/artemis/
>>
>>
>>
>> For a complete report of changes:
>>
>>
>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>>
>>
>> And the documentation can be found here:
>>
>> https://activemq.apache.org/artemis/docs.html
>>
>>
>>
>> Regards
>>
>>
>>
>> Clebert Suconic
>>
>
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Jim Gomes <jg...@apache.org>.
Disregard. There seems to be synchronizing issues between the mirrors. Some
mirrors have it, some don't. I had to manually browse the mirrors to find
one that did.
On Tue, Sep 13, 2016 at 1:48 PM Jim Gomes <jg...@apache.org> wrote:
> The download links are still broken. How long before they will be active?
>
>
> On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <cl...@gmail.com>
> wrote:
>
>> Apache ActiveMQ Artemis 1.4.0 has been released.
>>
>> There are a lot of improvements included in this release:
>>
>> - Possibility of using a max size for paging, and monitoring disk
>> sizes and improving flow control
>> - Interceptors support for MQTT
>> - Reload configuration support
>>
>> The artemis sub-project website has been updated:
>>
>> http://activemq.apache.org/artemis/
>>
>>
>>
>> For a complete report of changes:
>>
>>
>> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>>
>>
>> And the documentation can be found here:
>>
>> https://activemq.apache.org/artemis/docs.html
>>
>>
>>
>> Regards
>>
>>
>>
>> Clebert Suconic
>>
>
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Jim Gomes <jg...@apache.org>.
The download links are still broken. How long before they will be active?
On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <cl...@gmail.com>
wrote:
> Apache ActiveMQ Artemis 1.4.0 has been released.
>
> There are a lot of improvements included in this release:
>
> - Possibility of using a max size for paging, and monitoring disk
> sizes and improving flow control
> - Interceptors support for MQTT
> - Reload configuration support
>
> The artemis sub-project website has been updated:
>
> http://activemq.apache.org/artemis/
>
>
>
> For a complete report of changes:
>
>
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>
>
> And the documentation can be found here:
>
> https://activemq.apache.org/artemis/docs.html
>
>
>
> Regards
>
>
>
> Clebert Suconic
>
Re: [ANNOUNCE] Apache Artemis 1.4.0 Released
Posted by Jim Gomes <jg...@apache.org>.
The download links are still broken. How long before they will be active?
On Tue, Sep 13, 2016 at 8:40 AM Clebert Suconic <cl...@gmail.com>
wrote:
> Apache ActiveMQ Artemis 1.4.0 has been released.
>
> There are a lot of improvements included in this release:
>
> - Possibility of using a max size for paging, and monitoring disk
> sizes and improving flow control
> - Interceptors support for MQTT
> - Reload configuration support
>
> The artemis sub-project website has been updated:
>
> http://activemq.apache.org/artemis/
>
>
>
> For a complete report of changes:
>
>
> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315920&version=12336052
>
>
> And the documentation can be found here:
>
> https://activemq.apache.org/artemis/docs.html
>
>
>
> Regards
>
>
>
> Clebert Suconic
>