You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@lucene.apache.org by Nicholas Knize <nk...@gmail.com> on 2018/12/07 22:46:33 UTC
[VOTE] Release Lucene/Solr 7.6.0 RC2
Please vote for release candidate 2 for Lucene/Solr 7.6.0
The artifacts can be downloaded from:
*https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
<https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/>*
You can run the smoke tester directly with this command:
python3 -u dev-tools/scripts/smokeTestRelease.py \
*https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
<https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/>*
Here's my +1
SUCCESS! [0:50:22.047749]
--
Nicholas Knize, Ph.D., GISP
Geospatial Software Guy | Elasticsearch
Apache Lucene Committer
nknize@apache.org
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Nicholas Knize <nk...@gmail.com>.
The vote has passed. Huge thanks to all that voted and helped in the
process. I will begin the remaining steps and announce the release either
tomorrow or Friday.
Thanks again!
On Wed, Dec 12, 2018 at 6:47 AM Dawid Weiss <da...@gmail.com> wrote:
> SUCCESS! [1:07:17.725159]
>
> +1 to release.
>
> On Wed, Dec 12, 2018 at 12:49 AM Uwe Schindler <uw...@thetaphi.de> wrote:
> >
> > Hi,
> >
> >
> >
> > I also did some local tests with Solr (on Windows, with whitespaces in
> path name): Starts and works fine with Java 8, Java 9, Java 10 and also
> Java 11.
> >
> >
> >
> > +1 to release (the Smoke tester was ran with Java 8 and Java 9 using
> Policeman Jenkins, see mail before)!
> >
> >
> >
> > Uwe
> >
> >
> >
> > -----
> >
> > Uwe Schindler
> >
> > Achterdiek 19, D-28357 Bremen
> >
> > http://www.thetaphi.de
> >
> > eMail: uwe@thetaphi.de
> >
> >
> >
> > From: Uwe Schindler <uw...@thetaphi.de>
> > Sent: Tuesday, December 11, 2018 9:30 AM
> > To: dev@lucene.apache.org
> > Subject: RE: [VOTE] Release Lucene/Solr 7.6.0 RC2
> >
> >
> >
> > Hi,
> >
> >
> >
> > Policeman Jenkins checked the release on my request, results are here:
> https://jenkins.thetaphi.de/job/Lucene-Solr-Release-Tester/10/console
> >
> >
> >
> > In short:
> >
> >
> >
> > SUCCESS! [2:26:45.209399]
> >
> >
> >
> > Finished: SUCCESS
> >
> >
> >
> > This run took 2 times as long as for most others here, because it tested
> with Java 8 along with “--test-java9” parameter! So this verified that the
> release works both with Java 8, but also Java 9+ (MR-JAR, Unsafe,…):
> >
> >
> >
> > + python3 -u dev-tools/scripts/smokeTestRelease.py --test-java9
> /home/jenkins/tools/java/64bit/latest-jdk9 --tmp-dir
> /var/lib/jenkins/workspace/Lucene-Solr-Release-Tester/smoketmp
> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
> >
> > Revision: 719cde97f84640faa1e3525690d262946571245f
> >
> > Java 1.8 JAVA_HOME=/home/jenkins/tools/java/64bit/latest-jdk8
> >
> > Java 9 JAVA_HOME=/home/jenkins/tools/java/64bit/latest-jdk9
> >
> >
> >
> > Here is Policeman’s +1
> >
> >
> >
> > Uwe Schindler will do some quick checks on the binary ZIP with Windows
> on his local computer (to see if Solr starts and all scripts can handle
> whitespace in pathnames) and give his +1 a bit later!
> >
> >
> >
> > Uwe
> >
> >
> >
> > -----
> >
> > Uwe Schindler
> >
> > Achterdiek 19, D-28357 Bremen
> >
> > http://www.thetaphi.de
> >
> > eMail: uwe@thetaphi.de
> >
> >
> >
> > From: Nicholas Knize <nk...@gmail.com>
> > Sent: Friday, December 7, 2018 11:47 PM
> > To: Lucene/Solr dev <de...@lucene.apache.org>
> > Subject: [VOTE] Release Lucene/Solr 7.6.0 RC2
> >
> >
> >
> > Please vote for release candidate 2 for Lucene/Solr 7.6.0
> >
> >
> >
> > The artifacts can be downloaded from:
> >
> >
> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
> >
> >
> >
> > You can run the smoke tester directly with this command:
> >
> >
> >
> > python3 -u dev-tools/scripts/smokeTestRelease.py \
> >
> >
> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
> >
> >
> >
> > Here's my +1
> >
> > SUCCESS! [0:50:22.047749]
> >
> > --
> >
> > Nicholas Knize, Ph.D., GISP
> > Geospatial Software Guy | Elasticsearch
> > Apache Lucene Committer
> > nknize@apache.org
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org
> For additional commands, e-mail: dev-help@lucene.apache.org
>
> --
Nicholas Knize, Ph.D., GISP
Geospatial Software Guy | Elasticsearch
Apache Lucene Committer
nknize@apache.org
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Dawid Weiss <da...@gmail.com>.
SUCCESS! [1:07:17.725159]
+1 to release.
On Wed, Dec 12, 2018 at 12:49 AM Uwe Schindler <uw...@thetaphi.de> wrote:
>
> Hi,
>
>
>
> I also did some local tests with Solr (on Windows, with whitespaces in path name): Starts and works fine with Java 8, Java 9, Java 10 and also Java 11.
>
>
>
> +1 to release (the Smoke tester was ran with Java 8 and Java 9 using Policeman Jenkins, see mail before)!
>
>
>
> Uwe
>
>
>
> -----
>
> Uwe Schindler
>
> Achterdiek 19, D-28357 Bremen
>
> http://www.thetaphi.de
>
> eMail: uwe@thetaphi.de
>
>
>
> From: Uwe Schindler <uw...@thetaphi.de>
> Sent: Tuesday, December 11, 2018 9:30 AM
> To: dev@lucene.apache.org
> Subject: RE: [VOTE] Release Lucene/Solr 7.6.0 RC2
>
>
>
> Hi,
>
>
>
> Policeman Jenkins checked the release on my request, results are here: https://jenkins.thetaphi.de/job/Lucene-Solr-Release-Tester/10/console
>
>
>
> In short:
>
>
>
> SUCCESS! [2:26:45.209399]
>
>
>
> Finished: SUCCESS
>
>
>
> This run took 2 times as long as for most others here, because it tested with Java 8 along with “--test-java9” parameter! So this verified that the release works both with Java 8, but also Java 9+ (MR-JAR, Unsafe,…):
>
>
>
> + python3 -u dev-tools/scripts/smokeTestRelease.py --test-java9 /home/jenkins/tools/java/64bit/latest-jdk9 --tmp-dir /var/lib/jenkins/workspace/Lucene-Solr-Release-Tester/smoketmp https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>
> Revision: 719cde97f84640faa1e3525690d262946571245f
>
> Java 1.8 JAVA_HOME=/home/jenkins/tools/java/64bit/latest-jdk8
>
> Java 9 JAVA_HOME=/home/jenkins/tools/java/64bit/latest-jdk9
>
>
>
> Here is Policeman’s +1
>
>
>
> Uwe Schindler will do some quick checks on the binary ZIP with Windows on his local computer (to see if Solr starts and all scripts can handle whitespace in pathnames) and give his +1 a bit later!
>
>
>
> Uwe
>
>
>
> -----
>
> Uwe Schindler
>
> Achterdiek 19, D-28357 Bremen
>
> http://www.thetaphi.de
>
> eMail: uwe@thetaphi.de
>
>
>
> From: Nicholas Knize <nk...@gmail.com>
> Sent: Friday, December 7, 2018 11:47 PM
> To: Lucene/Solr dev <de...@lucene.apache.org>
> Subject: [VOTE] Release Lucene/Solr 7.6.0 RC2
>
>
>
> Please vote for release candidate 2 for Lucene/Solr 7.6.0
>
>
>
> The artifacts can be downloaded from:
>
> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>
>
>
> You can run the smoke tester directly with this command:
>
>
>
> python3 -u dev-tools/scripts/smokeTestRelease.py \
>
> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>
>
>
> Here's my +1
>
> SUCCESS! [0:50:22.047749]
>
> --
>
> Nicholas Knize, Ph.D., GISP
> Geospatial Software Guy | Elasticsearch
> Apache Lucene Committer
> nknize@apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org
For additional commands, e-mail: dev-help@lucene.apache.org
RE: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Uwe Schindler <uw...@thetaphi.de>.
Hi,
I also did some local tests with Solr (on Windows, with whitespaces in path name): Starts and works fine with Java 8, Java 9, Java 10 and also Java 11.
+1 to release (the Smoke tester was ran with Java 8 and Java 9 using Policeman Jenkins, see mail before)!
Uwe
-----
Uwe Schindler
Achterdiek 19, D-28357 Bremen
http://www.thetaphi.de <http://www.thetaphi.de/>
eMail: uwe@thetaphi.de
From: Uwe Schindler <uw...@thetaphi.de>
Sent: Tuesday, December 11, 2018 9:30 AM
To: dev@lucene.apache.org
Subject: RE: [VOTE] Release Lucene/Solr 7.6.0 RC2
Hi,
Policeman Jenkins checked the release on my request, results are here: https://jenkins.thetaphi.de/job/Lucene-Solr-Release-Tester/10/console
In short:
SUCCESS! [2:26:45.209399]
Finished: SUCCESS
This run took 2 times as long as for most others here, because it tested with Java 8 along with “--test-java9” parameter! So this verified that the release works both with Java 8, but also Java 9+ (MR-JAR, Unsafe,…):
+ python3 -u dev-tools/scripts/smokeTestRelease.py --test-java9 /home/jenkins/tools/java/64bit/latest-jdk9 --tmp-dir /var/lib/jenkins/workspace/Lucene-Solr-Release-Tester/smoketmp <https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
Revision: 719cde97f84640faa1e3525690d262946571245f
Java 1.8 JAVA_HOME=/home/jenkins/tools/java/64bit/latest-jdk8
Java 9 JAVA_HOME=/home/jenkins/tools/java/64bit/latest-jdk9
Here is Policeman’s +1
Uwe Schindler will do some quick checks on the binary ZIP with Windows on his local computer (to see if Solr starts and all scripts can handle whitespace in pathnames) and give his +1 a bit later!
Uwe
-----
Uwe Schindler
Achterdiek 19, D-28357 Bremen
http://www.thetaphi.de <http://www.thetaphi.de/>
eMail: uwe@thetaphi.de <ma...@thetaphi.de>
From: Nicholas Knize <nknize@gmail.com <ma...@gmail.com> >
Sent: Friday, December 7, 2018 11:47 PM
To: Lucene/Solr dev <dev@lucene.apache.org <ma...@lucene.apache.org> >
Subject: [VOTE] Release Lucene/Solr 7.6.0 RC2
Please vote for release candidate 2 for Lucene/Solr 7.6.0
The artifacts can be downloaded from:
https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
You can run the smoke tester directly with this command:
python3 -u dev-tools/scripts/smokeTestRelease.py \
https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
Here's my +1
SUCCESS! [0:50:22.047749]
--
Nicholas Knize, Ph.D., GISP
Geospatial Software Guy | Elasticsearch
Apache Lucene Committer
nknize@apache.org <ma...@apache.org>
RE: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Uwe Schindler <uw...@thetaphi.de>.
Hi,
Policeman Jenkins checked the release on my request, results are here: https://jenkins.thetaphi.de/job/Lucene-Solr-Release-Tester/10/console
In short:
SUCCESS! [2:26:45.209399]
Finished: SUCCESS
This run took 2 times as long as for most others here, because it tested with Java 8 along with “--test-java9” parameter! So this verified that the release works both with Java 8, but also Java 9+ (MR-JAR, Unsafe,…):
+ python3 -u dev-tools/scripts/smokeTestRelease.py --test-java9 /home/jenkins/tools/java/64bit/latest-jdk9 --tmp-dir /var/lib/jenkins/workspace/Lucene-Solr-Release-Tester/smoketmp <https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
Revision: 719cde97f84640faa1e3525690d262946571245f
Java 1.8 JAVA_HOME=/home/jenkins/tools/java/64bit/latest-jdk8
Java 9 JAVA_HOME=/home/jenkins/tools/java/64bit/latest-jdk9
Here is Policeman’s +1
Uwe Schindler will do some quick checks on the binary ZIP with Windows on his local computer (to see if Solr starts and all scripts can handle whitespace in pathnames) and give his +1 a bit later!
Uwe
-----
Uwe Schindler
Achterdiek 19, D-28357 Bremen
http://www.thetaphi.de <http://www.thetaphi.de/>
eMail: uwe@thetaphi.de
From: Nicholas Knize <nk...@gmail.com>
Sent: Friday, December 7, 2018 11:47 PM
To: Lucene/Solr dev <de...@lucene.apache.org>
Subject: [VOTE] Release Lucene/Solr 7.6.0 RC2
Please vote for release candidate 2 for Lucene/Solr 7.6.0
The artifacts can be downloaded from:
https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
You can run the smoke tester directly with this command:
python3 -u dev-tools/scripts/smokeTestRelease.py \
https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
Here's my +1
SUCCESS! [0:50:22.047749]
--
Nicholas Knize, Ph.D., GISP
Geospatial Software Guy | Elasticsearch
Apache Lucene Committer
nknize@apache.org <ma...@apache.org>
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Nhat Nguyen <nh...@elastic.co.INVALID>.
+1
SUCCESS! [0:51:48.799726]
> On Dec 10, 2018, at 3:13 PM, Kevin Risden <kr...@apache.org> wrote:
>
> +1 SUCCESS! [1:25:32.085654]
>
> Kevin Risden
>
>
> On Mon, Dec 10, 2018 at 10:26 AM Adrien Grand <jpountz@gmail.com <ma...@gmail.com>> wrote:
> The two first tests failed but the third one succeeded: SUCCESS!
> [2:08:33.062772]
>
> Failures that I hit the first time were:
> [junit4] Tests with failures [seed: 34E045D96BC975FE]:
> [junit4] - org.apache.solr.cloud.MoveReplicaHDFSTest.test
> [junit4] - org.apache.solr.cloud.MoveReplicaHDFSTest.testNormalMove
>
> and the second time:
> [junit4] Tests with failures [seed: 7FECFFED6C4B164D]:
> [junit4] -
> org.apache.solr.cloud.cdcr.CdcrOpsAndBoundariesTest.testReplicationStartStop
>
> This last failure doesn't seem to have occurred a lot recently. I
> still have the log in case someone wants to dig. I'll assume all these
> failures are transient.
>
> Changes and docs look good to me.
>
> +1
>
>
>
>
> On Mon, Dec 10, 2018 at 1:08 PM jim ferenczi <jim.ferenczi@gmail.com <ma...@gmail.com>> wrote:
> >
> > +1
> > SUCCESS! [1:18:17.272247]
> >
> > Le dim. 9 déc. 2018 à 19:38, Gus Heck <gus.heck@gmail.com <ma...@gmail.com>> a écrit :
> >>
> >> Yup, my lack of a (non binding) vote reflects my expectation that this is a flakey test, though I felt I should mention the result in case it concurs with other runs.
> >>
> >> On Sun, Dec 9, 2018, 12:40 PM Erick Erickson <erickerickson@gmail.com <ma...@gmail.com> wrote:
> >>>
> >>> I often find it useful to go here and check to see if this is a flaky test:
> >>>
> >>> http://fucit.org/solr-jenkins-reports/failure-report.html <http://fucit.org/solr-jenkins-reports/failure-report.html>
> >>>
> >>> This link is particularly useful, it records (IIUC) tests that have
> >>> changed in their failure frequency recently:
> >>>
> >>> http://fucit.org/solr-jenkins-reports/suspicious-failure-report.html <http://fucit.org/solr-jenkins-reports/suspicious-failure-report.html>
> >>>
> >>> Here's the top-level link.
> >>>
> >>> http://fucit.org/solr-jenkins-reports/ <http://fucit.org/solr-jenkins-reports/>
> >>>
> >>> Hoss generates this on a continuous basis and I've gathered them on a
> >>> weekly basis since March. This particular test has been failing off
> >>> and on since early October, although fairly rarely.
> >>>
> >>> FWIW,
> >>> Erick
> >>> On Sun, Dec 9, 2018 at 8:05 AM Gus Heck <gus.heck@gmail.com <ma...@gmail.com>> wrote:
> >>> >
> >>> > :( I got
> >>> >
> >>> > [junit4] Tests with failures [seed: 152E9D1C58BAEE10]:
> >>> > [junit4] - org.apache.solr.cloud.MoveReplicaTest.test
> >>> >
> >>> > on
> >>> >
> >>> > Ubuntu 18.04.1 LTS
> >>> > Revision: 719cde97f84640faa1e3525690d262946571245f
> >>> > Java 1.8 JAVA_HOME=/home/gus/tools/jdk1.8.0_144
> >>> >
> >>> > However
> >>> >
> >>> > ant test -Dtestcase=MoveReplicaTest -Dtests.method=test -Dtests.seed=152E9D1C58BAEE10 -Dtests.locale=ar-IQ -Dtests.timezone=Europe/Helsinki -Dtests.asserts=true -Dtests.file.encoding=UTF-8
> >>> >
> >>> > did not reproduce it.
> >>> >
> >>> > On Sun, Dec 9, 2018 at 7:02 AM David Smiley <david.w.smiley@gmail.com <ma...@gmail.com>> wrote:
> >>> >>
> >>> >> +1
> >>> >>
> >>> >> SUCCESS! [1:05:22.652328]
> >>> >>
> >>> >>
> >>> >> On Fri, Dec 7, 2018 at 5:46 PM Nicholas Knize <nknize@gmail.com <ma...@gmail.com>> wrote:
> >>> >>>
> >>> >>> Please vote for release candidate 2 for Lucene/Solr 7.6.0
> >>> >>>
> >>> >>> The artifacts can be downloaded from:
> >>> >>> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/ <https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/>
> >>> >>>
> >>> >>> You can run the smoke tester directly with this command:
> >>> >>>
> >>> >>> python3 -u dev-tools/scripts/smokeTestRelease.py \
> >>> >>> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/ <https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/>
> >>> >>>
> >>> >>> Here's my +1
> >>> >>> SUCCESS! [0:50:22.047749]
> >>> >>> --
> >>> >>>
> >>> >>> Nicholas Knize, Ph.D., GISP
> >>> >>> Geospatial Software Guy | Elasticsearch
> >>> >>> Apache Lucene Committer
> >>> >>> nknize@apache.org <ma...@apache.org>
> >>> >>
> >>> >> --
> >>> >> Lucene/Solr Search Committer (PMC), Developer, Author, Speaker
> >>> >> LinkedIn: http://linkedin.com/in/davidwsmiley <http://linkedin.com/in/davidwsmiley> | Book: http://www.solrenterprisesearchserver.com <http://www.solrenterprisesearchserver.com/>
> >>> >
> >>> >
> >>> >
> >>> > --
> >>> > http://www.the111shift.com <http://www.the111shift.com/>
> >>>
> >>> ---------------------------------------------------------------------
> >>> To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org <ma...@lucene.apache.org>
> >>> For additional commands, e-mail: dev-help@lucene.apache.org <ma...@lucene.apache.org>
> >>>
>
>
> --
> Adrien
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org <ma...@lucene.apache.org>
> For additional commands, e-mail: dev-help@lucene.apache.org <ma...@lucene.apache.org>
>
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Kevin Risden <kr...@apache.org>.
+1 SUCCESS! [1:25:32.085654]
Kevin Risden
On Mon, Dec 10, 2018 at 10:26 AM Adrien Grand <jp...@gmail.com> wrote:
> The two first tests failed but the third one succeeded: SUCCESS!
> [2:08:33.062772]
>
> Failures that I hit the first time were:
> [junit4] Tests with failures [seed: 34E045D96BC975FE]:
> [junit4] - org.apache.solr.cloud.MoveReplicaHDFSTest.test
> [junit4] - org.apache.solr.cloud.MoveReplicaHDFSTest.testNormalMove
>
> and the second time:
> [junit4] Tests with failures [seed: 7FECFFED6C4B164D]:
> [junit4] -
>
> org.apache.solr.cloud.cdcr.CdcrOpsAndBoundariesTest.testReplicationStartStop
>
> This last failure doesn't seem to have occurred a lot recently. I
> still have the log in case someone wants to dig. I'll assume all these
> failures are transient.
>
> Changes and docs look good to me.
>
> +1
>
>
>
>
> On Mon, Dec 10, 2018 at 1:08 PM jim ferenczi <ji...@gmail.com>
> wrote:
> >
> > +1
> > SUCCESS! [1:18:17.272247]
> >
> > Le dim. 9 déc. 2018 à 19:38, Gus Heck <gu...@gmail.com> a écrit :
> >>
> >> Yup, my lack of a (non binding) vote reflects my expectation that this
> is a flakey test, though I felt I should mention the result in case it
> concurs with other runs.
> >>
> >> On Sun, Dec 9, 2018, 12:40 PM Erick Erickson <erickerickson@gmail.com
> wrote:
> >>>
> >>> I often find it useful to go here and check to see if this is a flaky
> test:
> >>>
> >>> http://fucit.org/solr-jenkins-reports/failure-report.html
> >>>
> >>> This link is particularly useful, it records (IIUC) tests that have
> >>> changed in their failure frequency recently:
> >>>
> >>> http://fucit.org/solr-jenkins-reports/suspicious-failure-report.html
> >>>
> >>> Here's the top-level link.
> >>>
> >>> http://fucit.org/solr-jenkins-reports/
> >>>
> >>> Hoss generates this on a continuous basis and I've gathered them on a
> >>> weekly basis since March. This particular test has been failing off
> >>> and on since early October, although fairly rarely.
> >>>
> >>> FWIW,
> >>> Erick
> >>> On Sun, Dec 9, 2018 at 8:05 AM Gus Heck <gu...@gmail.com> wrote:
> >>> >
> >>> > :( I got
> >>> >
> >>> > [junit4] Tests with failures [seed: 152E9D1C58BAEE10]:
> >>> > [junit4] - org.apache.solr.cloud.MoveReplicaTest.test
> >>> >
> >>> > on
> >>> >
> >>> > Ubuntu 18.04.1 LTS
> >>> > Revision: 719cde97f84640faa1e3525690d262946571245f
> >>> > Java 1.8 JAVA_HOME=/home/gus/tools/jdk1.8.0_144
> >>> >
> >>> > However
> >>> >
> >>> > ant test -Dtestcase=MoveReplicaTest -Dtests.method=test
> -Dtests.seed=152E9D1C58BAEE10 -Dtests.locale=ar-IQ
> -Dtests.timezone=Europe/Helsinki -Dtests.asserts=true
> -Dtests.file.encoding=UTF-8
> >>> >
> >>> > did not reproduce it.
> >>> >
> >>> > On Sun, Dec 9, 2018 at 7:02 AM David Smiley <
> david.w.smiley@gmail.com> wrote:
> >>> >>
> >>> >> +1
> >>> >>
> >>> >> SUCCESS! [1:05:22.652328]
> >>> >>
> >>> >>
> >>> >> On Fri, Dec 7, 2018 at 5:46 PM Nicholas Knize <nk...@gmail.com>
> wrote:
> >>> >>>
> >>> >>> Please vote for release candidate 2 for Lucene/Solr 7.6.0
> >>> >>>
> >>> >>> The artifacts can be downloaded from:
> >>> >>>
> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
> >>> >>>
> >>> >>> You can run the smoke tester directly with this command:
> >>> >>>
> >>> >>> python3 -u dev-tools/scripts/smokeTestRelease.py \
> >>> >>>
> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
> >>> >>>
> >>> >>> Here's my +1
> >>> >>> SUCCESS! [0:50:22.047749]
> >>> >>> --
> >>> >>>
> >>> >>> Nicholas Knize, Ph.D., GISP
> >>> >>> Geospatial Software Guy | Elasticsearch
> >>> >>> Apache Lucene Committer
> >>> >>> nknize@apache.org
> >>> >>
> >>> >> --
> >>> >> Lucene/Solr Search Committer (PMC), Developer, Author, Speaker
> >>> >> LinkedIn: http://linkedin.com/in/davidwsmiley | Book:
> http://www.solrenterprisesearchserver.com
> >>> >
> >>> >
> >>> >
> >>> > --
> >>> > http://www.the111shift.com
> >>>
> >>> ---------------------------------------------------------------------
> >>> To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org
> >>> For additional commands, e-mail: dev-help@lucene.apache.org
> >>>
>
>
> --
> Adrien
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org
> For additional commands, e-mail: dev-help@lucene.apache.org
>
>
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Adrien Grand <jp...@gmail.com>.
The two first tests failed but the third one succeeded: SUCCESS!
[2:08:33.062772]
Failures that I hit the first time were:
[junit4] Tests with failures [seed: 34E045D96BC975FE]:
[junit4] - org.apache.solr.cloud.MoveReplicaHDFSTest.test
[junit4] - org.apache.solr.cloud.MoveReplicaHDFSTest.testNormalMove
and the second time:
[junit4] Tests with failures [seed: 7FECFFED6C4B164D]:
[junit4] -
org.apache.solr.cloud.cdcr.CdcrOpsAndBoundariesTest.testReplicationStartStop
This last failure doesn't seem to have occurred a lot recently. I
still have the log in case someone wants to dig. I'll assume all these
failures are transient.
Changes and docs look good to me.
+1
On Mon, Dec 10, 2018 at 1:08 PM jim ferenczi <ji...@gmail.com> wrote:
>
> +1
> SUCCESS! [1:18:17.272247]
>
> Le dim. 9 déc. 2018 à 19:38, Gus Heck <gu...@gmail.com> a écrit :
>>
>> Yup, my lack of a (non binding) vote reflects my expectation that this is a flakey test, though I felt I should mention the result in case it concurs with other runs.
>>
>> On Sun, Dec 9, 2018, 12:40 PM Erick Erickson <erickerickson@gmail.com wrote:
>>>
>>> I often find it useful to go here and check to see if this is a flaky test:
>>>
>>> http://fucit.org/solr-jenkins-reports/failure-report.html
>>>
>>> This link is particularly useful, it records (IIUC) tests that have
>>> changed in their failure frequency recently:
>>>
>>> http://fucit.org/solr-jenkins-reports/suspicious-failure-report.html
>>>
>>> Here's the top-level link.
>>>
>>> http://fucit.org/solr-jenkins-reports/
>>>
>>> Hoss generates this on a continuous basis and I've gathered them on a
>>> weekly basis since March. This particular test has been failing off
>>> and on since early October, although fairly rarely.
>>>
>>> FWIW,
>>> Erick
>>> On Sun, Dec 9, 2018 at 8:05 AM Gus Heck <gu...@gmail.com> wrote:
>>> >
>>> > :( I got
>>> >
>>> > [junit4] Tests with failures [seed: 152E9D1C58BAEE10]:
>>> > [junit4] - org.apache.solr.cloud.MoveReplicaTest.test
>>> >
>>> > on
>>> >
>>> > Ubuntu 18.04.1 LTS
>>> > Revision: 719cde97f84640faa1e3525690d262946571245f
>>> > Java 1.8 JAVA_HOME=/home/gus/tools/jdk1.8.0_144
>>> >
>>> > However
>>> >
>>> > ant test -Dtestcase=MoveReplicaTest -Dtests.method=test -Dtests.seed=152E9D1C58BAEE10 -Dtests.locale=ar-IQ -Dtests.timezone=Europe/Helsinki -Dtests.asserts=true -Dtests.file.encoding=UTF-8
>>> >
>>> > did not reproduce it.
>>> >
>>> > On Sun, Dec 9, 2018 at 7:02 AM David Smiley <da...@gmail.com> wrote:
>>> >>
>>> >> +1
>>> >>
>>> >> SUCCESS! [1:05:22.652328]
>>> >>
>>> >>
>>> >> On Fri, Dec 7, 2018 at 5:46 PM Nicholas Knize <nk...@gmail.com> wrote:
>>> >>>
>>> >>> Please vote for release candidate 2 for Lucene/Solr 7.6.0
>>> >>>
>>> >>> The artifacts can be downloaded from:
>>> >>> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>>> >>>
>>> >>> You can run the smoke tester directly with this command:
>>> >>>
>>> >>> python3 -u dev-tools/scripts/smokeTestRelease.py \
>>> >>> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>>> >>>
>>> >>> Here's my +1
>>> >>> SUCCESS! [0:50:22.047749]
>>> >>> --
>>> >>>
>>> >>> Nicholas Knize, Ph.D., GISP
>>> >>> Geospatial Software Guy | Elasticsearch
>>> >>> Apache Lucene Committer
>>> >>> nknize@apache.org
>>> >>
>>> >> --
>>> >> Lucene/Solr Search Committer (PMC), Developer, Author, Speaker
>>> >> LinkedIn: http://linkedin.com/in/davidwsmiley | Book: http://www.solrenterprisesearchserver.com
>>> >
>>> >
>>> >
>>> > --
>>> > http://www.the111shift.com
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org
>>> For additional commands, e-mail: dev-help@lucene.apache.org
>>>
--
Adrien
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org
For additional commands, e-mail: dev-help@lucene.apache.org
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by jim ferenczi <ji...@gmail.com>.
+1
SUCCESS! [1:18:17.272247]
Le dim. 9 déc. 2018 à 19:38, Gus Heck <gu...@gmail.com> a écrit :
> Yup, my lack of a (non binding) vote reflects my expectation that this is
> a flakey test, though I felt I should mention the result in case it concurs
> with other runs.
>
> On Sun, Dec 9, 2018, 12:40 PM Erick Erickson <erickerickson@gmail.com
> wrote:
>
>> I often find it useful to go here and check to see if this is a flaky
>> test:
>>
>> http://fucit.org/solr-jenkins-reports/failure-report.html
>>
>> This link is particularly useful, it records (IIUC) tests that have
>> changed in their failure frequency recently:
>>
>> http://fucit.org/solr-jenkins-reports/suspicious-failure-report.html
>>
>> Here's the top-level link.
>>
>> http://fucit.org/solr-jenkins-reports/
>>
>> Hoss generates this on a continuous basis and I've gathered them on a
>> weekly basis since March. This particular test has been failing off
>> and on since early October, although fairly rarely.
>>
>> FWIW,
>> Erick
>> On Sun, Dec 9, 2018 at 8:05 AM Gus Heck <gu...@gmail.com> wrote:
>> >
>> > :( I got
>> >
>> > [junit4] Tests with failures [seed: 152E9D1C58BAEE10]:
>> > [junit4] - org.apache.solr.cloud.MoveReplicaTest.test
>> >
>> > on
>> >
>> > Ubuntu 18.04.1 LTS
>> > Revision: 719cde97f84640faa1e3525690d262946571245f
>> > Java 1.8 JAVA_HOME=/home/gus/tools/jdk1.8.0_144
>> >
>> > However
>> >
>> > ant test -Dtestcase=MoveReplicaTest -Dtests.method=test
>> -Dtests.seed=152E9D1C58BAEE10 -Dtests.locale=ar-IQ
>> -Dtests.timezone=Europe/Helsinki -Dtests.asserts=true
>> -Dtests.file.encoding=UTF-8
>> >
>> > did not reproduce it.
>> >
>> > On Sun, Dec 9, 2018 at 7:02 AM David Smiley <da...@gmail.com>
>> wrote:
>> >>
>> >> +1
>> >>
>> >> SUCCESS! [1:05:22.652328]
>> >>
>> >>
>> >> On Fri, Dec 7, 2018 at 5:46 PM Nicholas Knize <nk...@gmail.com>
>> wrote:
>> >>>
>> >>> Please vote for release candidate 2 for Lucene/Solr 7.6.0
>> >>>
>> >>> The artifacts can be downloaded from:
>> >>>
>> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>> >>>
>> >>> You can run the smoke tester directly with this command:
>> >>>
>> >>> python3 -u dev-tools/scripts/smokeTestRelease.py \
>> >>>
>> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>> >>>
>> >>> Here's my +1
>> >>> SUCCESS! [0:50:22.047749]
>> >>> --
>> >>>
>> >>> Nicholas Knize, Ph.D., GISP
>> >>> Geospatial Software Guy | Elasticsearch
>> >>> Apache Lucene Committer
>> >>> nknize@apache.org
>> >>
>> >> --
>> >> Lucene/Solr Search Committer (PMC), Developer, Author, Speaker
>> >> LinkedIn: http://linkedin.com/in/davidwsmiley | Book:
>> http://www.solrenterprisesearchserver.com
>> >
>> >
>> >
>> > --
>> > http://www.the111shift.com
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org
>> For additional commands, e-mail: dev-help@lucene.apache.org
>>
>>
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Gus Heck <gu...@gmail.com>.
Yup, my lack of a (non binding) vote reflects my expectation that this is a
flakey test, though I felt I should mention the result in case it concurs
with other runs.
On Sun, Dec 9, 2018, 12:40 PM Erick Erickson <erickerickson@gmail.com wrote:
> I often find it useful to go here and check to see if this is a flaky test:
>
> http://fucit.org/solr-jenkins-reports/failure-report.html
>
> This link is particularly useful, it records (IIUC) tests that have
> changed in their failure frequency recently:
>
> http://fucit.org/solr-jenkins-reports/suspicious-failure-report.html
>
> Here's the top-level link.
>
> http://fucit.org/solr-jenkins-reports/
>
> Hoss generates this on a continuous basis and I've gathered them on a
> weekly basis since March. This particular test has been failing off
> and on since early October, although fairly rarely.
>
> FWIW,
> Erick
> On Sun, Dec 9, 2018 at 8:05 AM Gus Heck <gu...@gmail.com> wrote:
> >
> > :( I got
> >
> > [junit4] Tests with failures [seed: 152E9D1C58BAEE10]:
> > [junit4] - org.apache.solr.cloud.MoveReplicaTest.test
> >
> > on
> >
> > Ubuntu 18.04.1 LTS
> > Revision: 719cde97f84640faa1e3525690d262946571245f
> > Java 1.8 JAVA_HOME=/home/gus/tools/jdk1.8.0_144
> >
> > However
> >
> > ant test -Dtestcase=MoveReplicaTest -Dtests.method=test
> -Dtests.seed=152E9D1C58BAEE10 -Dtests.locale=ar-IQ
> -Dtests.timezone=Europe/Helsinki -Dtests.asserts=true
> -Dtests.file.encoding=UTF-8
> >
> > did not reproduce it.
> >
> > On Sun, Dec 9, 2018 at 7:02 AM David Smiley <da...@gmail.com>
> wrote:
> >>
> >> +1
> >>
> >> SUCCESS! [1:05:22.652328]
> >>
> >>
> >> On Fri, Dec 7, 2018 at 5:46 PM Nicholas Knize <nk...@gmail.com> wrote:
> >>>
> >>> Please vote for release candidate 2 for Lucene/Solr 7.6.0
> >>>
> >>> The artifacts can be downloaded from:
> >>>
> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
> >>>
> >>> You can run the smoke tester directly with this command:
> >>>
> >>> python3 -u dev-tools/scripts/smokeTestRelease.py \
> >>>
> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
> >>>
> >>> Here's my +1
> >>> SUCCESS! [0:50:22.047749]
> >>> --
> >>>
> >>> Nicholas Knize, Ph.D., GISP
> >>> Geospatial Software Guy | Elasticsearch
> >>> Apache Lucene Committer
> >>> nknize@apache.org
> >>
> >> --
> >> Lucene/Solr Search Committer (PMC), Developer, Author, Speaker
> >> LinkedIn: http://linkedin.com/in/davidwsmiley | Book:
> http://www.solrenterprisesearchserver.com
> >
> >
> >
> > --
> > http://www.the111shift.com
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org
> For additional commands, e-mail: dev-help@lucene.apache.org
>
>
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Erick Erickson <er...@gmail.com>.
I often find it useful to go here and check to see if this is a flaky test:
http://fucit.org/solr-jenkins-reports/failure-report.html
This link is particularly useful, it records (IIUC) tests that have
changed in their failure frequency recently:
http://fucit.org/solr-jenkins-reports/suspicious-failure-report.html
Here's the top-level link.
http://fucit.org/solr-jenkins-reports/
Hoss generates this on a continuous basis and I've gathered them on a
weekly basis since March. This particular test has been failing off
and on since early October, although fairly rarely.
FWIW,
Erick
On Sun, Dec 9, 2018 at 8:05 AM Gus Heck <gu...@gmail.com> wrote:
>
> :( I got
>
> [junit4] Tests with failures [seed: 152E9D1C58BAEE10]:
> [junit4] - org.apache.solr.cloud.MoveReplicaTest.test
>
> on
>
> Ubuntu 18.04.1 LTS
> Revision: 719cde97f84640faa1e3525690d262946571245f
> Java 1.8 JAVA_HOME=/home/gus/tools/jdk1.8.0_144
>
> However
>
> ant test -Dtestcase=MoveReplicaTest -Dtests.method=test -Dtests.seed=152E9D1C58BAEE10 -Dtests.locale=ar-IQ -Dtests.timezone=Europe/Helsinki -Dtests.asserts=true -Dtests.file.encoding=UTF-8
>
> did not reproduce it.
>
> On Sun, Dec 9, 2018 at 7:02 AM David Smiley <da...@gmail.com> wrote:
>>
>> +1
>>
>> SUCCESS! [1:05:22.652328]
>>
>>
>> On Fri, Dec 7, 2018 at 5:46 PM Nicholas Knize <nk...@gmail.com> wrote:
>>>
>>> Please vote for release candidate 2 for Lucene/Solr 7.6.0
>>>
>>> The artifacts can be downloaded from:
>>> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>>>
>>> You can run the smoke tester directly with this command:
>>>
>>> python3 -u dev-tools/scripts/smokeTestRelease.py \
>>> https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>>>
>>> Here's my +1
>>> SUCCESS! [0:50:22.047749]
>>> --
>>>
>>> Nicholas Knize, Ph.D., GISP
>>> Geospatial Software Guy | Elasticsearch
>>> Apache Lucene Committer
>>> nknize@apache.org
>>
>> --
>> Lucene/Solr Search Committer (PMC), Developer, Author, Speaker
>> LinkedIn: http://linkedin.com/in/davidwsmiley | Book: http://www.solrenterprisesearchserver.com
>
>
>
> --
> http://www.the111shift.com
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@lucene.apache.org
For additional commands, e-mail: dev-help@lucene.apache.org
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by Gus Heck <gu...@gmail.com>.
:( I got
[junit4] Tests with failures [seed: 152E9D1C58BAEE10]:
[junit4] - org.apache.solr.cloud.MoveReplicaTest.test
on
Ubuntu 18.04.1 LTS
Revision: 719cde97f84640faa1e3525690d262946571245f
Java 1.8 JAVA_HOME=/home/gus/tools/jdk1.8.0_144
However
ant test -Dtestcase=MoveReplicaTest -Dtests.method=test
-Dtests.seed=152E9D1C58BAEE10 -Dtests.locale=ar-IQ
-Dtests.timezone=Europe/Helsinki -Dtests.asserts=true
-Dtests.file.encoding=UTF-8
did not reproduce it.
On Sun, Dec 9, 2018 at 7:02 AM David Smiley <da...@gmail.com>
wrote:
> +1
>
> SUCCESS! [1:05:22.652328]
>
> On Fri, Dec 7, 2018 at 5:46 PM Nicholas Knize <nk...@gmail.com> wrote:
>
>> Please vote for release candidate 2 for Lucene/Solr 7.6.0
>>
>> The artifacts can be downloaded from:
>> *https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>> <https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/>*
>>
>> You can run the smoke tester directly with this command:
>>
>> python3 -u dev-tools/scripts/smokeTestRelease.py \
>> *https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
>> <https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/>*
>>
>> Here's my +1
>> SUCCESS! [0:50:22.047749]
>> --
>>
>> Nicholas Knize, Ph.D., GISP
>> Geospatial Software Guy | Elasticsearch
>> Apache Lucene Committer
>> nknize@apache.org
>>
> --
> Lucene/Solr Search Committer (PMC), Developer, Author, Speaker
> LinkedIn: http://linkedin.com/in/davidwsmiley | Book:
> http://www.solrenterprisesearchserver.com
>
--
http://www.the111shift.com
Re: [VOTE] Release Lucene/Solr 7.6.0 RC2
Posted by David Smiley <da...@gmail.com>.
+1
SUCCESS! [1:05:22.652328]
On Fri, Dec 7, 2018 at 5:46 PM Nicholas Knize <nk...@gmail.com> wrote:
> Please vote for release candidate 2 for Lucene/Solr 7.6.0
>
> The artifacts can be downloaded from:
> *https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
> <https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/>*
>
> You can run the smoke tester directly with this command:
>
> python3 -u dev-tools/scripts/smokeTestRelease.py \
> *https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/
> <https://dist.apache.org/repos/dist/dev/lucene/lucene-solr-7.6.0-RC2-rev719cde97f84640faa1e3525690d262946571245f/>*
>
> Here's my +1
> SUCCESS! [0:50:22.047749]
> --
>
> Nicholas Knize, Ph.D., GISP
> Geospatial Software Guy | Elasticsearch
> Apache Lucene Committer
> nknize@apache.org
>
--
Lucene/Solr Search Committer (PMC), Developer, Author, Speaker
LinkedIn: http://linkedin.com/in/davidwsmiley | Book:
http://www.solrenterprisesearchserver.com