You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@ambari.apache.org by Sandeep Baldawa <sa...@gmail.com> on 2013/04/07 09:27:06 UTC
Ambari Development Environment Issues/Workarounds
Hi,
Have my dev environment set and my ambari server up and running.
I did the following to setup my Dev Environment from a fresh Rhel 6 64 bit.
Am marking the issues *I faced issues highlighted in red and the
workarounds I used highlighted in green(am not sure if these are correct,
but had the ambari-server up and running), wanted clarification on the same
from experts*.
Environment:- Install Rhel 64 bit(2.6.32)
*
*
*Install Pre-requisite Software*
- Check if Python is installed :- "python -v"
- Install maven:- yum install mvn
- Install OpenJDK for development:-
https://access.redhat.com/knowledge/docs/en-US/JBoss_Enterprise_SOA_Platform/4.3/html/Getting_Started_Guide/appe-install_jdk_rhel.html
- sh setuptools-0.6c11-py2.6.eggyum install rpm-build
- yum install gcc-c++
- Install NodeJs and nm :- Download latest tar from nodejs.org and add in
~/.bashrc
- npm install @brunch
- yum install git
- In /home/ambari-server do a "git clone git://git.apache.org/ambari.git"
Issue:- mvn -X -B -e clean install package rpm:rpm -DskipTests
-Dpython.ver="python
>= 2.6" => Throws a bunch of errors. Maybe tests are not building correctly.
Workaround:-Run mvn -X -B -e clean install package rpm:rpm => Works fine
Issue:- postgresql is not being installed or maybe not being installed
correctly, "service postgresql status" returns unrecognised service
Workaround:- Manually install postgresql using the following commands
yum list post*
yum install postgresql84.x86_64
yum install postgresql84-server.x86_64
service postgresql initdb
service postgresql start
Issue:- Running "ambari-server setup" and then then "ambari-server start"
gives error i.e.(the one I posted in a previous email to the dev group)
that ambari-server user does not exist.
Workaround:- Create new user "ambari-server"
- ambari-server setup
- ambari-server start
- tail -f /var/log/ambari-server/ambari-server.log
- Check the below link if it works correctly
http://localhost.localdomain:8080/<http://localhost.localdomain:8080/#/installer/step1>
Thanks,
Sandeep
Re: Ambari Development Environment Issues/Workarounds
Posted by Sandeep Baldawa <sa...@gmail.com>.
Done.
On Sun, Apr 7, 2013 at 8:18 PM, Mahadev Konar <ma...@apache.org> wrote:
> Nice.
>
> Sandeep,
> You want to open a jira for changes to the dev document? We can review
> and edit the dev wiki for the same.
>
> thanks
> mahadev
>
>
> On Sun, Apr 7, 2013 at 12:40 AM, Sandeep Baldawa
> <sa...@gmail.com> wrote:
> > Also Adding a step which I missed to document previously
> >
> >
> > Environment:- Install Rhel 64 bit(2.6.32)
> > *
> > *
> > *Install Pre-requisite Software*
> > 1. Check if Python is installed :- "python -v"
> > 2. Install maven:- yum install mvn
> > 3. Install OpenJDK for development:-
> >
> https://access.redhat.com/knowledge/docs/en-US/JBoss_Enterprise_SOA_Platform/4.3/html/Getting_Started_Guide/appe-install_jdk_rhel.html
> > 4. sh setuptools-0.6c11-py2.6.eggyum install rpm-build
> > 5. yum install gcc-c++
> > 6. Install NodeJs and nm :- Download latest tar from nodejs.org and add
> in
> > ~/.bashrc
> > 7. npm install @brunch
> > 8. yum install git
> >
> > 9. In /home/ambari-server do a "git clone git://
> git.apache.org/ambari.git"
> > Issue:- mvn -X -B -e clean install package rpm:rpm -DskipTests
> > -Dpython.ver="python
> >>= 2.6" => Throws a bunch of errors. Maybe tests are not building
> correctly.
> > Workaround:-Run mvn -X -B -e clean install package rpm:rpm => Works fine
> >
> > 10. yum install ambari-server/target/rpm/
> >
> ambari-server/RPMS/noarch/ambari-server-1.3.0-SNAPSHOT20130406201746.noarch.rpm
> >
> > Issue:- postgresql is not being installed or maybe not being installed
> > correctly, "service postgresql status" returns unrecognised service
> > Workaround:- Manually install postgresql using the following commands
> > 11. yum list post*
> > 12. yum install postgresql84.x86_64
> > 13. yum install postgresql84-server.x86_64
> > 14. service postgresql initdb
> > 15. service postgresql start
> >
> > Issue:- Running "ambari-server setup" and then then "ambari-server
> start"
> > gives error i.e.(the one I posted in a previous email to the dev group)
> > that ambari-server user does not exist.
> > Workaround:- Create new user "ambari-server"
> >
> > 16. ambari-server setup
> > 17. ambari-server start
> > 18. tail -f /var/log/ambari-server/ambari-server.log
> > 19. Check the below link if it works correctly
> > http://localhost.localdomain:8080/<
> http://localhost.localdomain:8080/#/installer/step1>
> >
> > Thanks,
> > Sandeep
> >
> >
> >
> > On Sun, Apr 7, 2013 at 12:33 AM, Sandeep Baldawa
> > <sa...@gmail.com>wrote:
> >
> >> FYI these steps are wrt the document at
> >> https://cwiki.apache.org/confluence/display/AMBARI/Ambari+Development
> >>
> >>
> >> On Sun, Apr 7, 2013 at 12:27 AM, Sandeep Baldawa <
> sandeepbaldawa@gmail.com
> >> > wrote:
> >>
> >>> Hi,
> >>>
> >>> Have my dev environment set and my ambari server up and running.
> >>>
> >>> I did the following to setup my Dev Environment from a fresh Rhel 6 64
> >>> bit. Am marking the issues *I faced issues highlighted in red and the
> >>> workarounds I used highlighted in green(am not sure if these are
> correct,
> >>> but had the ambari-server up and running), wanted clarification on the
> same
> >>> from experts*.
> >>>
> >>> Environment:- Install Rhel 64 bit(2.6.32)
> >>> *
> >>> *
> >>> *Install Pre-requisite Software*
> >>> - Check if Python is installed :- "python -v"
> >>> - Install maven:- yum install mvn
> >>> - Install OpenJDK for development:-
> >>>
> https://access.redhat.com/knowledge/docs/en-US/JBoss_Enterprise_SOA_Platform/4.3/html/Getting_Started_Guide/appe-install_jdk_rhel.html
> >>> - sh setuptools-0.6c11-py2.6.eggyum install rpm-build
> >>> - yum install gcc-c++
> >>> - Install NodeJs and nm :- Download latest tar from nodejs.org and add
> >>> in ~/.bashrc
> >>> - npm install @brunch
> >>> - yum install git
> >>>
> >>> - In /home/ambari-server do a "git clone git://
> git.apache.org/ambari.git"
> >>> Issue:- mvn -X -B -e clean install package rpm:rpm -DskipTests
> >>> -Dpython.ver="python >= 2.6" => Throws a bunch of errors. Maybe tests
> >>> are not building correctly.
> >>> Workaround:-Run mvn -X -B -e clean install package rpm:rpm => Works
> fine
> >>>
> >>> Issue:- postgresql is not being installed or maybe not being installed
> >>> correctly, "service postgresql status" returns unrecognised service
> >>> Workaround:- Manually install postgresql using the following commands
> >>> yum list post*
> >>> yum install postgresql84.x86_64
> >>> yum install postgresql84-server.x86_64
> >>> service postgresql initdb
> >>> service postgresql start
> >>>
> >>> Issue:- Running "ambari-server setup" and then then "ambari-server
> >>> start" gives error i.e.(the one I posted in a previous email to the dev
> >>> group) that ambari-server user does not exist.
> >>> Workaround:- Create new user "ambari-server"
> >>>
> >>> - ambari-server setup
> >>> - ambari-server start
> >>> - tail -f /var/log/ambari-server/ambari-server.log
> >>> - Check the below link if it works correctly
> >>> http://localhost.localdomain:8080/<
> http://localhost.localdomain:8080/#/installer/step1>
> >>>
> >>> Thanks,
> >>> Sandeep
> >>>
> >>
> >>
>
Re: Ambari Development Environment Issues/Workarounds
Posted by Mahadev Konar <ma...@apache.org>.
Nice.
Sandeep,
You want to open a jira for changes to the dev document? We can review
and edit the dev wiki for the same.
thanks
mahadev
On Sun, Apr 7, 2013 at 12:40 AM, Sandeep Baldawa
<sa...@gmail.com> wrote:
> Also Adding a step which I missed to document previously
>
>
> Environment:- Install Rhel 64 bit(2.6.32)
> *
> *
> *Install Pre-requisite Software*
> 1. Check if Python is installed :- "python -v"
> 2. Install maven:- yum install mvn
> 3. Install OpenJDK for development:-
> https://access.redhat.com/knowledge/docs/en-US/JBoss_Enterprise_SOA_Platform/4.3/html/Getting_Started_Guide/appe-install_jdk_rhel.html
> 4. sh setuptools-0.6c11-py2.6.eggyum install rpm-build
> 5. yum install gcc-c++
> 6. Install NodeJs and nm :- Download latest tar from nodejs.org and add in
> ~/.bashrc
> 7. npm install @brunch
> 8. yum install git
>
> 9. In /home/ambari-server do a "git clone git://git.apache.org/ambari.git"
> Issue:- mvn -X -B -e clean install package rpm:rpm -DskipTests
> -Dpython.ver="python
>>= 2.6" => Throws a bunch of errors. Maybe tests are not building correctly.
> Workaround:-Run mvn -X -B -e clean install package rpm:rpm => Works fine
>
> 10. yum install ambari-server/target/rpm/
> ambari-server/RPMS/noarch/ambari-server-1.3.0-SNAPSHOT20130406201746.noarch.rpm
>
> Issue:- postgresql is not being installed or maybe not being installed
> correctly, "service postgresql status" returns unrecognised service
> Workaround:- Manually install postgresql using the following commands
> 11. yum list post*
> 12. yum install postgresql84.x86_64
> 13. yum install postgresql84-server.x86_64
> 14. service postgresql initdb
> 15. service postgresql start
>
> Issue:- Running "ambari-server setup" and then then "ambari-server start"
> gives error i.e.(the one I posted in a previous email to the dev group)
> that ambari-server user does not exist.
> Workaround:- Create new user "ambari-server"
>
> 16. ambari-server setup
> 17. ambari-server start
> 18. tail -f /var/log/ambari-server/ambari-server.log
> 19. Check the below link if it works correctly
> http://localhost.localdomain:8080/<http://localhost.localdomain:8080/#/installer/step1>
>
> Thanks,
> Sandeep
>
>
>
> On Sun, Apr 7, 2013 at 12:33 AM, Sandeep Baldawa
> <sa...@gmail.com>wrote:
>
>> FYI these steps are wrt the document at
>> https://cwiki.apache.org/confluence/display/AMBARI/Ambari+Development
>>
>>
>> On Sun, Apr 7, 2013 at 12:27 AM, Sandeep Baldawa <sandeepbaldawa@gmail.com
>> > wrote:
>>
>>> Hi,
>>>
>>> Have my dev environment set and my ambari server up and running.
>>>
>>> I did the following to setup my Dev Environment from a fresh Rhel 6 64
>>> bit. Am marking the issues *I faced issues highlighted in red and the
>>> workarounds I used highlighted in green(am not sure if these are correct,
>>> but had the ambari-server up and running), wanted clarification on the same
>>> from experts*.
>>>
>>> Environment:- Install Rhel 64 bit(2.6.32)
>>> *
>>> *
>>> *Install Pre-requisite Software*
>>> - Check if Python is installed :- "python -v"
>>> - Install maven:- yum install mvn
>>> - Install OpenJDK for development:-
>>> https://access.redhat.com/knowledge/docs/en-US/JBoss_Enterprise_SOA_Platform/4.3/html/Getting_Started_Guide/appe-install_jdk_rhel.html
>>> - sh setuptools-0.6c11-py2.6.eggyum install rpm-build
>>> - yum install gcc-c++
>>> - Install NodeJs and nm :- Download latest tar from nodejs.org and add
>>> in ~/.bashrc
>>> - npm install @brunch
>>> - yum install git
>>>
>>> - In /home/ambari-server do a "git clone git://git.apache.org/ambari.git"
>>> Issue:- mvn -X -B -e clean install package rpm:rpm -DskipTests
>>> -Dpython.ver="python >= 2.6" => Throws a bunch of errors. Maybe tests
>>> are not building correctly.
>>> Workaround:-Run mvn -X -B -e clean install package rpm:rpm => Works fine
>>>
>>> Issue:- postgresql is not being installed or maybe not being installed
>>> correctly, "service postgresql status" returns unrecognised service
>>> Workaround:- Manually install postgresql using the following commands
>>> yum list post*
>>> yum install postgresql84.x86_64
>>> yum install postgresql84-server.x86_64
>>> service postgresql initdb
>>> service postgresql start
>>>
>>> Issue:- Running "ambari-server setup" and then then "ambari-server
>>> start" gives error i.e.(the one I posted in a previous email to the dev
>>> group) that ambari-server user does not exist.
>>> Workaround:- Create new user "ambari-server"
>>>
>>> - ambari-server setup
>>> - ambari-server start
>>> - tail -f /var/log/ambari-server/ambari-server.log
>>> - Check the below link if it works correctly
>>> http://localhost.localdomain:8080/<http://localhost.localdomain:8080/#/installer/step1>
>>>
>>> Thanks,
>>> Sandeep
>>>
>>
>>
Re: Ambari Development Environment Issues/Workarounds
Posted by Sandeep Baldawa <sa...@gmail.com>.
Also Adding a step which I missed to document previously
Environment:- Install Rhel 64 bit(2.6.32)
*
*
*Install Pre-requisite Software*
1. Check if Python is installed :- "python -v"
2. Install maven:- yum install mvn
3. Install OpenJDK for development:-
https://access.redhat.com/knowledge/docs/en-US/JBoss_Enterprise_SOA_Platform/4.3/html/Getting_Started_Guide/appe-install_jdk_rhel.html
4. sh setuptools-0.6c11-py2.6.eggyum install rpm-build
5. yum install gcc-c++
6. Install NodeJs and nm :- Download latest tar from nodejs.org and add in
~/.bashrc
7. npm install @brunch
8. yum install git
9. In /home/ambari-server do a "git clone git://git.apache.org/ambari.git"
Issue:- mvn -X -B -e clean install package rpm:rpm -DskipTests
-Dpython.ver="python
>= 2.6" => Throws a bunch of errors. Maybe tests are not building correctly.
Workaround:-Run mvn -X -B -e clean install package rpm:rpm => Works fine
10. yum install ambari-server/target/rpm/
ambari-server/RPMS/noarch/ambari-server-1.3.0-SNAPSHOT20130406201746.noarch.rpm
Issue:- postgresql is not being installed or maybe not being installed
correctly, "service postgresql status" returns unrecognised service
Workaround:- Manually install postgresql using the following commands
11. yum list post*
12. yum install postgresql84.x86_64
13. yum install postgresql84-server.x86_64
14. service postgresql initdb
15. service postgresql start
Issue:- Running "ambari-server setup" and then then "ambari-server start"
gives error i.e.(the one I posted in a previous email to the dev group)
that ambari-server user does not exist.
Workaround:- Create new user "ambari-server"
16. ambari-server setup
17. ambari-server start
18. tail -f /var/log/ambari-server/ambari-server.log
19. Check the below link if it works correctly
http://localhost.localdomain:8080/<http://localhost.localdomain:8080/#/installer/step1>
Thanks,
Sandeep
On Sun, Apr 7, 2013 at 12:33 AM, Sandeep Baldawa
<sa...@gmail.com>wrote:
> FYI these steps are wrt the document at
> https://cwiki.apache.org/confluence/display/AMBARI/Ambari+Development
>
>
> On Sun, Apr 7, 2013 at 12:27 AM, Sandeep Baldawa <sandeepbaldawa@gmail.com
> > wrote:
>
>> Hi,
>>
>> Have my dev environment set and my ambari server up and running.
>>
>> I did the following to setup my Dev Environment from a fresh Rhel 6 64
>> bit. Am marking the issues *I faced issues highlighted in red and the
>> workarounds I used highlighted in green(am not sure if these are correct,
>> but had the ambari-server up and running), wanted clarification on the same
>> from experts*.
>>
>> Environment:- Install Rhel 64 bit(2.6.32)
>> *
>> *
>> *Install Pre-requisite Software*
>> - Check if Python is installed :- "python -v"
>> - Install maven:- yum install mvn
>> - Install OpenJDK for development:-
>> https://access.redhat.com/knowledge/docs/en-US/JBoss_Enterprise_SOA_Platform/4.3/html/Getting_Started_Guide/appe-install_jdk_rhel.html
>> - sh setuptools-0.6c11-py2.6.eggyum install rpm-build
>> - yum install gcc-c++
>> - Install NodeJs and nm :- Download latest tar from nodejs.org and add
>> in ~/.bashrc
>> - npm install @brunch
>> - yum install git
>>
>> - In /home/ambari-server do a "git clone git://git.apache.org/ambari.git"
>> Issue:- mvn -X -B -e clean install package rpm:rpm -DskipTests
>> -Dpython.ver="python >= 2.6" => Throws a bunch of errors. Maybe tests
>> are not building correctly.
>> Workaround:-Run mvn -X -B -e clean install package rpm:rpm => Works fine
>>
>> Issue:- postgresql is not being installed or maybe not being installed
>> correctly, "service postgresql status" returns unrecognised service
>> Workaround:- Manually install postgresql using the following commands
>> yum list post*
>> yum install postgresql84.x86_64
>> yum install postgresql84-server.x86_64
>> service postgresql initdb
>> service postgresql start
>>
>> Issue:- Running "ambari-server setup" and then then "ambari-server
>> start" gives error i.e.(the one I posted in a previous email to the dev
>> group) that ambari-server user does not exist.
>> Workaround:- Create new user "ambari-server"
>>
>> - ambari-server setup
>> - ambari-server start
>> - tail -f /var/log/ambari-server/ambari-server.log
>> - Check the below link if it works correctly
>> http://localhost.localdomain:8080/<http://localhost.localdomain:8080/#/installer/step1>
>>
>> Thanks,
>> Sandeep
>>
>
>
Re: Ambari Development Environment Issues/Workarounds
Posted by Sandeep Baldawa <sa...@gmail.com>.
FYI these steps are wrt the document at
https://cwiki.apache.org/confluence/display/AMBARI/Ambari+Development
On Sun, Apr 7, 2013 at 12:27 AM, Sandeep Baldawa
<sa...@gmail.com>wrote:
> Hi,
>
> Have my dev environment set and my ambari server up and running.
>
> I did the following to setup my Dev Environment from a fresh Rhel 6 64
> bit. Am marking the issues *I faced issues highlighted in red and the
> workarounds I used highlighted in green(am not sure if these are correct,
> but had the ambari-server up and running), wanted clarification on the same
> from experts*.
>
> Environment:- Install Rhel 64 bit(2.6.32)
> *
> *
> *Install Pre-requisite Software*
> - Check if Python is installed :- "python -v"
> - Install maven:- yum install mvn
> - Install OpenJDK for development:-
> https://access.redhat.com/knowledge/docs/en-US/JBoss_Enterprise_SOA_Platform/4.3/html/Getting_Started_Guide/appe-install_jdk_rhel.html
> - sh setuptools-0.6c11-py2.6.eggyum install rpm-build
> - yum install gcc-c++
> - Install NodeJs and nm :- Download latest tar from nodejs.org and add in
> ~/.bashrc
> - npm install @brunch
> - yum install git
>
> - In /home/ambari-server do a "git clone git://git.apache.org/ambari.git"
> Issue:- mvn -X -B -e clean install package rpm:rpm -DskipTests
> -Dpython.ver="python >= 2.6" => Throws a bunch of errors. Maybe tests are
> not building correctly.
> Workaround:-Run mvn -X -B -e clean install package rpm:rpm => Works fine
>
> Issue:- postgresql is not being installed or maybe not being installed
> correctly, "service postgresql status" returns unrecognised service
> Workaround:- Manually install postgresql using the following commands
> yum list post*
> yum install postgresql84.x86_64
> yum install postgresql84-server.x86_64
> service postgresql initdb
> service postgresql start
>
> Issue:- Running "ambari-server setup" and then then "ambari-server
> start" gives error i.e.(the one I posted in a previous email to the dev
> group) that ambari-server user does not exist.
> Workaround:- Create new user "ambari-server"
>
> - ambari-server setup
> - ambari-server start
> - tail -f /var/log/ambari-server/ambari-server.log
> - Check the below link if it works correctly
> http://localhost.localdomain:8080/<http://localhost.localdomain:8080/#/installer/step1>
>
> Thanks,
> Sandeep
>