You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@tomcat.apache.org by John Turner <to...@johnturner.com> on 2003/05/09 20:31:18 UTC
Re: connection apache 1.3 to tomcat 4.1.24
>From comments I've received, this HOWTO is not confusing. It uses Apache
2, but the setup is the same for Apache 1.3. It uses JK. I've never
worked with SuSE, but I can't imagine it being much different than Red Hat.
http://www.johnturner.com/howto/rh72-howto.html
That said, I see some things with your configuration.
- you need this in httpd.conf:
AddModule mod_jk.c (if you're using JK)
- you need a much simpler workers.properties file...dump ALL of that JNI
stuff. Workers.properties shouldn't be more than this:
# BEGIN workers.properties
worker.list=ajp13
worker.ajp13.port=8009
worker.ajp13.host=localhost (or IP of Tomcat server)
worker.ajp13.type=ajp13
# END workers.properties
- you need an additional Listener element in server.xml for EACH Host
container...either you are missing it or you didn't post it. This is all
described in my HOWTO.
Your auto-generated mod_jk.conf file should look VERY similar to this:
http://www.johnturner.com/howto/mod_jk_conf.html
If it doesn't, go back and look at your server.xml and make sure your
ApacheConfig Listeners are correct.
John
On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin <em...@tre-sc.gov.br>
wrote:
> It has 4 days since i'm trying to get apache 1.3 to talk to tomcat 4.1.24
> through jk or jk2.
> At first some questions that i haven't seem in my long search :
>
> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
> In my case, I have to use apache 1.3.26 (in Suse linux) for compability
> with other php apps. I'd like to use the autoconf and remote deploy
> feature of tomcat 4.1 (that's why i'm upgrading my 3.2.3 production
> server, which works fine for jk)
> - Does jk works well for my case ? (apache 1.3.26 and tomcat 4.1.24). I
> read about jk2 is better for apache 2.0, is it true?
> - If does, i think i have made some mistake, because it's not working :)
>
> My conf :
>
> --------------------------------------------------------------------------
>
>
> ------------------------------------
> http.conf (lines added):
> LoadModule jk_module /usr/lib/apache/mod_jk.so
> Include /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>
> --------------------------------------------------------------------------
>
>
> ------------------------------------
> server.xml
>
> under "<Server port=..." i put (it's attached for better undertanding):
> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
> jdk14/conf/jk/workers.properties"
> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
> --------------------------------------------------------------------------
>
>
> ------------------------------------
> worker.properties configuration file (it's at /opt/local/jakarta-
> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>
> workers.java_home=/usr/java/j2sdk1.4.1_01
> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
> ps=/
>
> worker.list=ajp13
> worker.ajp13.port=8009
> worker.ajp13.host=lagoa.tre-sc.gov.br
> worker.ajp13.type=ajp13
> worker.ajp13.lbfactor=1
>
> worker.loadbalancer.type=lb
> worker.loadbalancer.balanced_workers=ajp13
> worker.inprocess.type=jni
> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
> tomcat.jar
> worker.inprocess.cmd_line=start
> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
> classic$(ps)libjvm.so
> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
> inprocess.stdout
> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
> inprocess.stderr
>
> --------------------------------------------------------------------------
>
>
> ------------------------------------
>
> here goes what happens :
>
> start tomcat, all ok.
>
> start apache, it says ok but in the log appears :
> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory: Error
> while opening the workers, jk will not work
> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory: Error
> while opening the workers, jk will not work
> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE) configured
> -- resuming normal operations
>
> is it necessary to do some other specific configuration?
> I tried jk2 before this, but it didn't work too :(
> I saw a lot of tutorials about jk and jk2, but all of them are either
> confuse or don't use autoconf
>
> Any clue would help
>
> Thanks in advance
>
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
JDBCRealm with Informix DB
Posted by Richard Li <rl...@amll.com>.
Hi all,
I just downloaded tomcat4.0.6 and modified the JDBCRealm for Informix
database.
When I use in
java.sql.DriverManager.getConnection("jdbc:informix-sqli://192.1.8.7:1536/Db
/customer:informixserver=leonov_net;
dbdate=MDY4-","cdr","cdr"), it works fine.
But when I used this in JDBCRealm in server.xml,
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="com.informix.jdbc.IfxDriver"
connectionURL="jdbc:informix-sqli://192.1.8.7:1536/Db/customer:informixserve
r=leonov_net;dbdate=MDY4-?user=cdr;password=cdr"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
and make sure there is user=cdr, passwd=cdr in table users and user_roles
it gave the following
**************************************************************************
Starting service Tomcat-Standalone
Apache Tomcat/4.0.6
Catalina.start: LifecycleException: Exception opening database connection:
jav
a.sql.SQLException: Invalid ASF API input parameters.
LifecycleException: Exception opening database connection:
java.sql.SQLExcepti
on: Invalid ASF API input parameters.
at org.apache.catalina.realm.JDBCRealm.start(JDBCRealm.java:615)
at
org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1108)
at
org.apache.catalina.core.StandardEngine.start(StandardEngine.java:343
)
at
org.apache.catalina.core.StandardService.start(StandardService.java:3
88)
at
org.apache.catalina.core.StandardServer.start(StandardServer.java:506
)
at org.apache.catalina.startup.Catalina.start(Catalina.java:781)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
What do I miss ? Please advise.
Thanks,
Richard
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Emerson Cargnin <em...@tre-sc.gov.br>.
ok, it worked too, you just put the name attribute inside host just : )
thanks for all
Emerson
John Turner wrote:
>
> In httpd.conf:
>
> NameVirtualHost *
>
> In Tomcat's server.xml:
>
> <Server port="8005" shutdown="SHUTDOWN" debug="0">
>
> <Engine name="Standalone" defaultHost="localhost" debug="0">
>
> <Host name="elbassan.tre-sc.gov.br" debug="1" appBase="webapps"
> unpackWARs="true" autoDeploy="true">
>
> In mod_jk.conf (or httpd.conf):
>
> <IfModule !mod_jk.c>
> LoadModule jk_module /usr/local/apache2/modules/mod_jk.so
> </IfModule>
>
> JkWorkersFile conf/workers.properties
> JkLogFile logs/mod_jk.log
> JkLogLevel debug
>
> <VirtualHost *>
> ServerName elbassan.tre-sc.gov.br
> DocumentRoot /some/path/to/tomcat/webapps/yourApp
> # Static files
> Alias /yourApp "/some/path/to/tomcat/webapps/yourApp"
> <Directory "/some/path/to/tomcat/webapps/yourApp">
> Options Indexes FollowSymLinks
> DirectoryIndex index.jsp
> </Directory>
> <Location "/yourApp/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
> <Location "/yourApp/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
> JkMount /*.jsp ajp13
> JkMount /servlet/* ajp13
> </VirtualHost>
>
> Repeat server.xml Host container and httpd.conf VirtualHost container
> for every virtual host desired.
>
> John
>
> On Tue, 13 May 2003 17:31:27 -0300, Emerson Cargnin
> <em...@tre-sc.gov.br> wrote:
>
>> I commented out the elbassan.tre-sc.gov.br on ServerName clause of
>> http.conf (that's the conf. in the production server), and the only
>> way to map apache->tomcat was to put the name of both tags (server
>> and host) to the result of hostname command, in the case elbassan or
>> the full dns : elbassan.tre-sc.gov.br.
>>
>> Maybe it be becouse fo the hosts file (i had a problem with jboss
>> because of the hosts Suse configuration)?
>>
>> <hosts file>
>> 127.0.0.1 localhost
>>
>> # special IPv6 addresses
>> ::1 localhost ipv6-localhost ipv6-loopback
>>
>> fe00::0 ipv6-localnet
>>
>> ff00::0 ipv6-mcastprefix
>> ff02::1 ipv6-allnodes
>> ff02::2 ipv6-allrouters
>> ff02::3 ipv6-allhosts
>>
>> 10.9.7.58 elbassan.tre-sc.gov.br elbassan
>>
>> </hosts file>
>>
>>
>> John Turner wrote:
>>
>>>
>>> The default is for localhost...it would never work for
>>> "elbassan.tre- sc.gov.br" unless you modified it. As an aside, I
>>> don't think you have it quite right yet..."Host" = virtual host,
>>> thus there is no reason to change the name parameter of Server to
>>> match.
>>>
>>> Perhaps if you post again and explain what it is you want to do, we
>>> can describe to you the best-practice way of setting it up.
>>>
>>> John
>>>
>>> On Tue, 13 May 2003 16:53:22 -0300, Emerson Cargnin <emerson@tre-
>>> sc.gov.br> wrote:
>>>
>>>> finally made it !!!!
>>>>
>>>> I get the server name line in http.conf : ServerName elbassan.tre-
>>>> sc.gov.br
>>>>
>>>> And put this in name attributes in either "<Server" and "<Host" as
>>>> follows :
>>>>
>>>> <Server name="elbassan.tre-sc.gov.br" port="8005"
>>>> shutdown="SHUTDOWN" debug="0">
>>>>
>>>> <Host name="elbassan.tre-sc.gov.br" debug="0" appBase="webapps"
>>>> unpackWARs="true" autoDeploy="true">
>>>>
>>>>
>>>> If there's another way to do it, please tell me : ) is it a special
>>>> case? why the default cookbook didn't work for me, as I had apache
>>>> and tomcat fresh from installation...?
>>>>
>>>> Thanks for all!!!!
>>>>
>>>> Emerson
>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>>>
>>>>
>>>
>>>
>>>
>>
>
>
>
--
Emerson Cargnin
Analista de Sitemas
Setor de Desenvolvimento de Sistemas - TRE-SC
tel : (048) - 251-3700 - Ramal 3181
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by John Turner <to...@johnturner.com>.
In httpd.conf:
NameVirtualHost *
In Tomcat's server.xml:
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Engine name="Standalone" defaultHost="localhost" debug="0">
<Host name="elbassan.tre-sc.gov.br" debug="1" appBase="webapps"
unpackWARs="true" autoDeploy="true">
In mod_jk.conf (or httpd.conf):
<IfModule !mod_jk.c>
LoadModule jk_module /usr/local/apache2/modules/mod_jk.so
</IfModule>
JkWorkersFile conf/workers.properties
JkLogFile logs/mod_jk.log
JkLogLevel debug
<VirtualHost *>
ServerName elbassan.tre-sc.gov.br
DocumentRoot /some/path/to/tomcat/webapps/yourApp
# Static files
Alias /yourApp "/some/path/to/tomcat/webapps/yourApp"
<Directory "/some/path/to/tomcat/webapps/yourApp">
Options Indexes FollowSymLinks
DirectoryIndex index.jsp
</Directory>
<Location "/yourApp/WEB-INF/*">
AllowOverride None
deny from all
</Location>
<Location "/yourApp/META-INF/*">
AllowOverride None
deny from all
</Location>
JkMount /*.jsp ajp13
JkMount /servlet/* ajp13
</VirtualHost>
Repeat server.xml Host container and httpd.conf VirtualHost container for
every virtual host desired.
John
On Tue, 13 May 2003 17:31:27 -0300, Emerson Cargnin <em...@tre-sc.gov.br>
wrote:
> I commented out the elbassan.tre-sc.gov.br on ServerName clause of
> http.conf (that's the conf. in the production server), and the only way
> to map apache->tomcat was to put the name of both tags (server and host)
> to the result of hostname command, in the case elbassan or the full dns :
> elbassan.tre-sc.gov.br.
>
> Maybe it be becouse fo the hosts file (i had a problem with jboss because
> of the hosts Suse configuration)?
>
> <hosts file>
> 127.0.0.1 localhost
>
> # special IPv6 addresses
> ::1 localhost ipv6-localhost ipv6-loopback
>
> fe00::0 ipv6-localnet
>
> ff00::0 ipv6-mcastprefix
> ff02::1 ipv6-allnodes
> ff02::2 ipv6-allrouters
> ff02::3 ipv6-allhosts
>
> 10.9.7.58 elbassan.tre-sc.gov.br elbassan
>
> </hosts file>
>
>
> John Turner wrote:
>
>>
>> The default is for localhost...it would never work for "elbassan.tre-
>> sc.gov.br" unless you modified it. As an aside, I don't think you have
>> it quite right yet..."Host" = virtual host, thus there is no reason to
>> change the name parameter of Server to match.
>>
>> Perhaps if you post again and explain what it is you want to do, we can
>> describe to you the best-practice way of setting it up.
>>
>> John
>>
>> On Tue, 13 May 2003 16:53:22 -0300, Emerson Cargnin <emerson@tre-
>> sc.gov.br> wrote:
>>
>>> finally made it !!!!
>>>
>>> I get the server name line in http.conf : ServerName elbassan.tre-
>>> sc.gov.br
>>>
>>> And put this in name attributes in either "<Server" and "<Host" as
>>> follows :
>>>
>>> <Server name="elbassan.tre-sc.gov.br" port="8005" shutdown="SHUTDOWN"
>>> debug="0">
>>>
>>> <Host name="elbassan.tre-sc.gov.br" debug="0" appBase="webapps"
>>> unpackWARs="true" autoDeploy="true">
>>>
>>>
>>> If there's another way to do it, please tell me : ) is it a special
>>> case? why the default cookbook didn't work for me, as I had apache and
>>> tomcat fresh from installation...?
>>>
>>> Thanks for all!!!!
>>>
>>> Emerson
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>>
>>>
>>
>>
>>
>
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Emerson Cargnin <em...@tre-sc.gov.br>.
I commented out the elbassan.tre-sc.gov.br on ServerName clause of
http.conf (that's the conf. in the production server), and the only way
to map apache->tomcat was to put the name of both tags (server and host)
to the result of hostname command, in the case elbassan or the full dns
: elbassan.tre-sc.gov.br.
Maybe it be becouse fo the hosts file (i had a problem with jboss
because of the hosts Suse configuration)?
<hosts file>
127.0.0.1 localhost
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
10.9.7.58 elbassan.tre-sc.gov.br elbassan
</hosts file>
John Turner wrote:
>
> The default is for localhost...it would never work for "elbassan.tre-
> sc.gov.br" unless you modified it. As an aside, I don't think you
> have it quite right yet..."Host" = virtual host, thus there is no
> reason to change the name parameter of Server to match.
>
> Perhaps if you post again and explain what it is you want to do, we
> can describe to you the best-practice way of setting it up.
>
> John
>
> On Tue, 13 May 2003 16:53:22 -0300, Emerson Cargnin
> <em...@tre-sc.gov.br> wrote:
>
>> finally made it !!!!
>>
>> I get the server name line in http.conf : ServerName elbassan.tre-
>> sc.gov.br
>>
>> And put this in name attributes in either "<Server" and "<Host" as
>> follows :
>>
>> <Server name="elbassan.tre-sc.gov.br" port="8005" shutdown="SHUTDOWN"
>> debug="0">
>>
>> <Host name="elbassan.tre-sc.gov.br" debug="0" appBase="webapps"
>> unpackWARs="true" autoDeploy="true">
>>
>>
>> If there's another way to do it, please tell me : ) is it a special
>> case? why the default cookbook didn't work for me, as I had apache
>> and tomcat fresh from installation...?
>>
>> Thanks for all!!!!
>>
>> Emerson
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>
>>
>
>
>
--
Emerson Cargnin
Analista de Sitemas
Setor de Desenvolvimento de Sistemas - TRE-SC
tel : (048) - 251-3700 - Ramal 3181
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by John Turner <to...@johnturner.com>.
The default is for localhost...it would never work for "elbassan.tre-
sc.gov.br" unless you modified it. As an aside, I don't think you have it
quite right yet..."Host" = virtual host, thus there is no reason to change
the name parameter of Server to match.
Perhaps if you post again and explain what it is you want to do, we can
describe to you the best-practice way of setting it up.
John
On Tue, 13 May 2003 16:53:22 -0300, Emerson Cargnin <em...@tre-sc.gov.br>
wrote:
> finally made it !!!!
>
> I get the server name line in http.conf : ServerName elbassan.tre-
> sc.gov.br
>
> And put this in name attributes in either "<Server" and "<Host" as
> follows :
>
> <Server name="elbassan.tre-sc.gov.br" port="8005" shutdown="SHUTDOWN"
> debug="0">
>
> <Host name="elbassan.tre-sc.gov.br" debug="0" appBase="webapps"
> unpackWARs="true" autoDeploy="true">
>
>
> If there's another way to do it, please tell me : ) is it a special case?
> why the default cookbook didn't work for me, as I had apache and tomcat
> fresh from installation...?
>
> Thanks for all!!!!
>
> Emerson
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
>
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Emerson Cargnin <em...@tre-sc.gov.br>.
finally made it !!!!
I get the server name line in http.conf : ServerName elbassan.tre-sc.gov.br
And put this in name attributes in either "<Server" and "<Host" as follows :
<Server name="elbassan.tre-sc.gov.br" port="8005" shutdown="SHUTDOWN"
debug="0">
<Host name="elbassan.tre-sc.gov.br" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
If there's another way to do it, please tell me : ) is it a special
case? why the default cookbook didn't work for me, as I had apache and
tomcat fresh from installation...?
Thanks for all!!!!
Emerson
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Qing Xie <xi...@ecopiabio.com>.
I'm using Apache 2.0.44, so I'm not sure if the configuration is the
same with Apache 1.3.
In my case, I don't define any global host in my httpd.conf. I modified
only two places:
NameVirtualHost *
Include /usr/java/tomcat/conf/auto/mod_jk.conf
After I start tomcat, I have to modify mod_jk.conf, change <VirtualHost
www.domain.com> to <VirtualHost *>
As for configuration of localhost, I think if you follow John's HOWTO,
it should work.
Qing
Emerson Cargnin wrote:
> you mean putting a listener under each context?
> hpw do I name the default host in apache to "localhost", so it could
> work. by the way, I didn't change anything of http.conf, so the
> procedures should work, shouln't?
>
> may be it could be a problem of "localhost" dns?
>
> Qing Xie wrote:
>
>> My guess was right. You have problems with you virtual host setting
>> because when JKMount is global, it works, when it's inside
>> <VirtualHost localhost>, it doesn't work.
>>
>> You can search for my post in the past few days re virtual host. It
>> may help you.
>>
>> Qing
>>
>>
>> Emerson Cargnin wrote:
>>
>>> hi all.
>>>
>>> I commented out the include command at httpd.conf and put the
>>> following :
>>>
>>> #Include
>>> /home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>
>>> <IfModule mod_jk.c>
>>> JkWorkersFile
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>>>
>>> JkLogFile
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>>>
>>>
>>> JkLogLevel debug
>>>
>>> JkMount /examples ajp13
>>> JkMount /examples/* ajp13
>>>
>>> </IfModule>
>>>
>>> And it worked.... I don't undertand any more : )
>>>
>>> because i had this at auto/mod_jk.conf :
>>>
>>> ...
>>> JkMount /examples/jsp/security/protected/j_security_check ajp13
>>> JkMount /examples/snoop ajp13
>>> JkMount /examples/servlet/* ajp13
>>> JkMount /examples/CompressionTest ajp13
>>> JkMount /examples/*.jsp ajp13
>>> JkMount /examples/servletToJsp ajp13
>>> JkMount /examples/SendMailServlet ajp13
>>> ...
>>>
>>> Emerson Cargnin wrote:
>>>
>>>> forget to say : apache 1.3.(26) and tomcat 4.1.24
>>>>
>>>> thanks
>>>>
>>>> Emerson Cargnin wrote:
>>>>
>>>>> could someone send an working copy of
>>>>> server.xml,workers.properties and httpd.conf ?
>>>>> I need a conf with auto-conf working....
>>>>>
>>>>> Hey john, i attached the files you ask......
>>>>>
>>>>> I don't know why, but after changing debug direct at mod_jk.conf
>>>>> to emerg it looks that even when deleting this file, tomcat
>>>>> generates the conf file with emerg mode.... how i put this back? I
>>>>> tried to put debug="debug" at the "<listener..." under "<Host..."
>>>>> but it keeps generating emerg : )
>>>>>
>>>>> Thanks for your help....
>>>>>
>>>>>
>>>>> John Turner wrote:
>>>>>
>>>>>>
>>>>>> Are you sure you are using Apache 1.3? Apache 1 typically needs
>>>>>> both LoadModule and AddModule, you can always put the AddModule
>>>>>> directive into an IF statement if needed, there are several
>>>>>> examples of this in a default httpd.conf file.
>>>>>>
>>>>>> My HOWTO doesn't say anything about AddModule because my HOWTO
>>>>>> deals with Apache 2, and Apache 2 doesn't use AddModule.
>>>>>>
>>>>>> Regarding the Apache log error, my guess is your VirtualHosts are
>>>>>> not correct, it looks like Apache is looking for numguess.jsp
>>>>>> within its default DocumentRoot. In a typical, default Apache +
>>>>>> Tomcat installation, it would look for numguess.jsp in
>>>>>> /some/path/to/tomcat/webapps/examples/jsp. So, unless you have
>>>>>> installed Tomcat in /srv/www/htdocs
>>>>>> ($CATALINA_HOME=/srv/www/htdocs), something else isn't right.
>>>>>>
>>>>>> The "done without a worker" error is pretty self-explanatory.
>>>>>>
>>>>>> I'd suggest that the next step be that you post your mod_jk.conf
>>>>>> file and your workers.properties file, and describe CATALINA_HOME.
>>>>>>
>>>>>> John
>>>>>>
>>>>>> On Sat, 10 May 2003 19:34:22 -0300, Emerson Cargnin
>>>>>> <em...@tre-sc.gov.br> wrote:
>>>>>>
>>>>>>> At first thanks for your fast reply : )
>>>>>>>
>>>>>>> - about adding AddModule mod_jk.c (if you're using JK)
>>>>>>> I thing that adding the line "LoadModule jk_module
>>>>>>> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you
>>>>>>> told, and your tutorial doens't say anything about this line,
>>>>>>> but apache just give me the following warn telling that it's
>>>>>>> already loaded :
>>>>>>>
>>>>>>> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already
>>>>>>> added, skipping
>>>>>>>
>>>>>>> - I'm almost there :). following the steps you tell at the
>>>>>>> tutorial, it creates the mod_jk.conf ok, but it looks that
>>>>>>> mod_jk doesn't find the webapps, although it's configured
>>>>>>> allright :
>>>>>>>
>>>>>>>
>>>>>>> Apache log :
>>>>>>> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does
>>>>>>> not exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>>>>>>>
>>>>>>> mod_jk.log
>>>>>>>
>>>>>>> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
>>>>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
>>>>>>> jk_uri_worker_map_t::map_uri_to_worker
>>>>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]:
>>>>>>> Attempting to map URI '/examples/jsp/num/numguess.jsp'
>>>>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
>>>>>>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>>>>>>
>>>>>>>
>>>>>>> It looks everything you said before is allright...
>>>>>>> any clue?
>>>>>>>
>>>>>>> John Turner wrote:
>>>>>>>
>>>>>>>>
>>>>>>>>> From comments I've received, this HOWTO is not confusing. It
>>>>>>>>> uses Apache
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> 2, but the setup is the same for Apache 1.3. It uses JK. I've
>>>>>>>> never worked with SuSE, but I can't imagine it being much
>>>>>>>> different than Red Hat.
>>>>>>>>
>>>>>>>> http://www.johnturner.com/howto/rh72-howto.html
>>>>>>>>
>>>>>>>> That said, I see some things with your configuration.
>>>>>>>>
>>>>>>>> - you need this in httpd.conf:
>>>>>>>>
>>>>>>>> AddModule mod_jk.c (if you're using JK)
>>>>>>>>
>>>>>>>> - you need a much simpler workers.properties file...dump ALL of
>>>>>>>> that JNI stuff. Workers.properties shouldn't be more than this:
>>>>>>>>
>>>>>>>> # BEGIN workers.properties
>>>>>>>> worker.list=ajp13
>>>>>>>> worker.ajp13.port=8009
>>>>>>>> worker.ajp13.host=localhost (or IP of Tomcat server)
>>>>>>>> worker.ajp13.type=ajp13
>>>>>>>> # END workers.properties
>>>>>>>> - you need an additional Listener element in server.xml for
>>>>>>>> EACH Host container...either you are missing it or you didn't
>>>>>>>> post it. This is all described in my HOWTO.
>>>>>>>>
>>>>>>>> Your auto-generated mod_jk.conf file should look VERY similar
>>>>>>>> to this:
>>>>>>>> http://www.johnturner.com/howto/mod_jk_conf.html
>>>>>>>>
>>>>>>>> If it doesn't, go back and look at your server.xml and make
>>>>>>>> sure your ApacheConfig Listeners are correct.
>>>>>>>>
>>>>>>>> John
>>>>>>>>
>>>>>>>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin
>>>>>>>> <emerson@tre- sc.gov.br> wrote:
>>>>>>>>
>>>>>>>>> It has 4 days since i'm trying to get apache 1.3 to talk to
>>>>>>>>> tomcat 4.1.24 through jk or jk2.
>>>>>>>>> At first some questions that i haven't seem in my long search :
>>>>>>>>>
>>>>>>>>> - What's is the best and simpler connector? jk, jk2 or
>>>>>>>>> mod_webapp ?
>>>>>>>>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>>>>>>>>> compability with other php apps. I'd like to use the autoconf
>>>>>>>>> and remote deploy feature of tomcat 4.1 (that's why i'm
>>>>>>>>> upgrading my 3.2.3 production server, which works fine for jk)
>>>>>>>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat
>>>>>>>>> 4.1.24). I read about jk2 is better for apache 2.0, is it true?
>>>>>>>>> - If does, i think i have made some mistake, because it's not
>>>>>>>>> working :)
>>>>>>>>>
>>>>>>>>> My conf :
>>>>>>>>>
>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ------------------------------------
>>>>>>>>> http.conf (lines added):
>>>>>>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>>>>>>> Include
>>>>>>>>> /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>>>>>>
>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ------------------------------------
>>>>>>>>> server.xml
>>>>>>>>>
>>>>>>>>> under "<Server port=..." i put (it's attached for better
>>>>>>>>> undertanding) :
>>>>>>>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>>>>>>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>>>>>>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>>>>>>>> jdk14/conf/jk/workers.properties"
>>>>>>>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>>>>>>>>
>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ------------------------------------
>>>>>>>>> worker.properties configuration file (it's at
>>>>>>>>> /opt/local/jakarta-
>>>>>>>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>>>>>>>
>>>>>>>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>>>>>>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>>>>>>>> ps=/
>>>>>>>>>
>>>>>>>>> worker.list=ajp13
>>>>>>>>> worker.ajp13.port=8009
>>>>>>>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>>>>>>>> worker.ajp13.type=ajp13
>>>>>>>>> worker.ajp13.lbfactor=1
>>>>>>>>>
>>>>>>>>> worker.loadbalancer.type=lb
>>>>>>>>> worker.loadbalancer.balanced_workers=ajp13
>>>>>>>>> worker.inprocess.type=jni
>>>>>>>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>>>>>>>> tomcat.jar
>>>>>>>>> worker.inprocess.cmd_line=start
>>>>>>>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>>>>>>>> classic$(ps)libjvm.so
>>>>>>>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>>>>>> inprocess.stdout
>>>>>>>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>>>>>> inprocess.stderr
>>>>>>>>>
>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ------------------------------------
>>>>>>>>>
>>>>>>>>> here goes what happens :
>>>>>>>>>
>>>>>>>>> start tomcat, all ok.
>>>>>>>>>
>>>>>>>>> start apache, it says ok but in the log appears :
>>>>>>>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or
>>>>>>>>> directory: Error while opening the workers, jk will not work
>>>>>>>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or
>>>>>>>>> directory: Error while opening the workers, jk will not work
>>>>>>>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>>>>>>>> configured -- resuming normal operations
>>>>>>>>>
>>>>>>>>> is it necessary to do some other specific configuration?
>>>>>>>>> I tried jk2 before this, but it didn't work too :(
>>>>>>>>> I saw a lot of tutorials about jk and jk2, but all of them are
>>>>>>>>> either confuse or don't use autoconf
>>>>>>>>>
>>>>>>>>> Any clue would help
>>>>>>>>>
>>>>>>>>> Thanks in advance
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>> ########## Auto generated on Tue May 13 15:03:31 BRT 2003##########
>>>>>
>>>>> <IfModule !mod_jk.c>
>>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>>> </IfModule>
>>>>>
>>>>> JkWorkersFile
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>>>>>
>>>>> JkLogFile
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>>>>>
>>>>>
>>>>> JkLogLevel debug
>>>>>
>>>>>
>>>>>
>>>>> <VirtualHost localhost>
>>>>> ServerName localhost
>>>>>
>>>>> #################### localhost:/admin ####################
>>>>>
>>>>> # Static files Alias /admin
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin"
>>>>>
>>>>>
>>>>> <Directory
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin">
>>>>>
>>>>> Options Indexes FollowSymLinks
>>>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>>>
>>>>>
>>>>> # Deny direct access to WEB-INF and META-INF
>>>>> #
>>>>> <Location "/admin/WEB-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> <Location "/admin/META-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> JkMount /admin/j_security_check ajp13
>>>>> JkMount /admin/*.do ajp13
>>>>> JkMount /admin/*.jsp ajp13
>>>>>
>>>>> #################### localhost:/webdav ####################
>>>>>
>>>>> # Static files Alias /webdav
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav"
>>>>>
>>>>>
>>>>> <Directory
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav">
>>>>>
>>>>> Options Indexes FollowSymLinks
>>>>> DirectoryIndex index.jsp index.html index.htm </Directory>
>>>>>
>>>>>
>>>>> # Deny direct access to WEB-INF and META-INF
>>>>> #
>>>>> <Location "/webdav/WEB-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> <Location "/webdav/META-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> JkMount /webdav/*.jsp ajp13
>>>>>
>>>>> #################### localhost:/examples ####################
>>>>>
>>>>> # Static files Alias /examples
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples"
>>>>>
>>>>>
>>>>> <Directory
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples">
>>>>>
>>>>> Options Indexes FollowSymLinks
>>>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>>>
>>>>>
>>>>> # Deny direct access to WEB-INF and META-INF
>>>>> #
>>>>> <Location "/examples/WEB-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> <Location "/examples/META-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> JkMount /examples/jsp/security/protected/j_security_check ajp13
>>>>> JkMount /examples/snoop ajp13
>>>>> JkMount /examples/servlet/* ajp13
>>>>> JkMount /examples/CompressionTest ajp13
>>>>> JkMount /examples/*.jsp ajp13
>>>>> JkMount /examples/servletToJsp ajp13
>>>>> JkMount /examples/SendMailServlet ajp13
>>>>>
>>>>> #################### localhost:/tomcat-docs ####################
>>>>>
>>>>> # Static files Alias /tomcat-docs
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs"
>>>>>
>>>>>
>>>>> <Directory
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs">
>>>>>
>>>>> Options Indexes FollowSymLinks
>>>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>>>
>>>>>
>>>>> # Deny direct access to WEB-INF and META-INF
>>>>> #
>>>>> <Location "/tomcat-docs/WEB-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> <Location "/tomcat-docs/META-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> JkMount /tomcat-docs/*.jsp ajp13
>>>>>
>>>>> #################### localhost:/manager ####################
>>>>>
>>>>> # Static files Alias /manager
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager"
>>>>>
>>>>>
>>>>> <Directory
>>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager">
>>>>>
>>>>> Options Indexes FollowSymLinks
>>>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>>>
>>>>>
>>>>> # Deny direct access to WEB-INF and META-INF
>>>>> #
>>>>> <Location "/manager/WEB-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> <Location "/manager/META-INF/*">
>>>>> AllowOverride None
>>>>> deny from all
>>>>> </Location>
>>>>>
>>>>> JkMount /manager/list ajp13
>>>>> JkMount /manager/serverinfo ajp13
>>>>> JkMount /manager/deploy ajp13
>>>>> JkMount /manager/sessions ajp13
>>>>> JkMount /manager/reload ajp13
>>>>> JkMount /manager/html/* ajp13
>>>>> JkMount /manager/resources ajp13
>>>>> JkMount /manager/start ajp13
>>>>> JkMount /manager/stop ajp13
>>>>> JkMount /manager/install ajp13
>>>>> JkMount /manager/*.jsp ajp13
>>>>> JkMount /manager/roles ajp13
>>>>> JkMount /manager/remove ajp13
>>>>> JkMount /manager/undeploy ajp13
>>>>> </VirtualHost>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>> worker.list=ajp13
>>>>> worker.ajp13.port=8009
>>>>> worker.ajp13.host=localhost
>>>>> worker.ajp13.type=ajp13
>>>>> worker.ajp13.lbfactor=1
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (172)]: Into
>>>>> jk_uri_worker_map_t::uri_worker_map_alloc
>>>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (375)]: Into
>>>>> jk_uri_worker_map_t::uri_worker_map_open
>>>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (396)]:
>>>>> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>>>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (422)]:
>>>>> jk_uri_worker_map_t::uri_worker_map_open, done
>>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (88)]: Into wc_open
>>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (222)]: Into
>>>>> build_worker_map, creating 1 workers
>>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (228)]: build_worker_map,
>>>>> creating worker ajp13
>>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (148)]: Into
>>>>> wc_create_worker
>>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (162)]: wc_create_worker,
>>>>> about to create instance ajp13 of ajp13
>>>>> [Tue May 13 15:04:37 2003] [jk_ajp13_worker.c (108)]: Into
>>>>> ajp13_worker_factory
>>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (171)]: wc_create_worker,
>>>>> about to validate and init ajp13
>>>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1219)]: Into
>>>>> jk_worker_t::validate
>>>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1239)]: In
>>>>> jk_worker_t::validate for worker ajp13 contact is localhost:8009
>>>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1267)]: Into
>>>>> jk_worker_t::init
>>>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1287)]: In
>>>>> jk_worker_t::init, setting socket timeout to 0
>>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (187)]: wc_create_worker,
>>>>> done
>>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (238)]: build_worker_map,
>>>>> removing old ajp13 worker [Tue May 13 15:04:37 2003] [jk_worker.c
>>>>> (250)]: build_worker_map, done
>>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (111)]: wc_open, done 1
>>>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (172)]: Into
>>>>> jk_uri_worker_map_t::uri_worker_map_alloc
>>>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (375)]: Into
>>>>> jk_uri_worker_map_t::uri_worker_map_open
>>>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (396)]:
>>>>> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>>>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (422)]:
>>>>> jk_uri_worker_map_t::uri_worker_map_open, done
>>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (88)]: Into wc_open
>>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (222)]: Into
>>>>> build_worker_map, creating 1 workers
>>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (228)]: build_worker_map,
>>>>> creating worker ajp13
>>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (148)]: Into
>>>>> wc_create_worker
>>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (162)]: wc_create_worker,
>>>>> about to create instance ajp13 of ajp13
>>>>> [Tue May 13 15:04:38 2003] [jk_ajp13_worker.c (108)]: Into
>>>>> ajp13_worker_factory
>>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (171)]: wc_create_worker,
>>>>> about to validate and init ajp13
>>>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1219)]: Into
>>>>> jk_worker_t::validate
>>>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1239)]: In
>>>>> jk_worker_t::validate for worker ajp13 contact is localhost:8009
>>>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1267)]: Into
>>>>> jk_worker_t::init
>>>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1287)]: In
>>>>> jk_worker_t::init, setting socket timeout to 0
>>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (187)]: wc_create_worker,
>>>>> done
>>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (238)]: build_worker_map,
>>>>> removing old ajp13 worker [Tue May 13 15:04:38 2003] [jk_worker.c
>>>>> (250)]: build_worker_map, done
>>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (111)]: wc_open, done 1
>>>>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (460)]: Into
>>>>> jk_uri_worker_map_t::map_uri_to_worker
>>>>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (477)]:
>>>>> Attempting to map URI '/examples/servlet/HelloWorldExample'
>>>>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (599)]:
>>>>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>> ##
>>>>> ## httpd.conf -- Apache HTTP server configuration file
>>>>> ##
>>>>>
>>>>> #
>>>>> # Based upon the NCSA server configuration files originally by Rob
>>>>> McCool.
>>>>> #
>>>>> # This is the main Apache server configuration file. It contains the
>>>>> # configuration directives that give the server its instructions.
>>>>> # See <URL:http://www.apache.org/docs/> for detailed information
>>>>> about
>>>>> # the directives.
>>>>> #
>>>>> # Do NOT simply read the instructions in here without understanding
>>>>> # what they do. They're here only as hints or reminders. If you
>>>>> are unsure
>>>>> # consult the online docs. You have been warned. #
>>>>> # After this file is processed, the server will look for and process
>>>>> # /srv/www/conf/srm.conf and then /srv/www/conf/access.conf
>>>>> # unless you have overridden these with ResourceConfig and/or
>>>>> # AccessConfig directives here.
>>>>> #
>>>>> # The configuration directives are grouped into three basic sections:
>>>>> # 1. Directives that control the operation of the Apache server
>>>>> process as a
>>>>> # whole (the 'global environment').
>>>>> # 2. Directives that define the parameters of the 'main' or
>>>>> 'default' server,
>>>>> # which responds to requests that aren't handled by a virtual
>>>>> host.
>>>>> # These directives also provide default values for the settings
>>>>> # of all virtual hosts.
>>>>> # 3. Settings for virtual hosts, which allow Web requests to be
>>>>> sent to
>>>>> # different IP addresses or hostnames and have them handled by
>>>>> the
>>>>> # same Apache server process.
>>>>> #
>>>>> # Configuration and logfile names: If the filenames you specify
>>>>> for many
>>>>> # of the server's control files begin with "/" (or "drive:/" for
>>>>> Win32), the
>>>>> # server will use that explicit path. If the filenames do *not*
>>>>> begin
>>>>> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
>>>>> # with ServerRoot set to "/usr/local/apache" will be interpreted
>>>>> by the
>>>>> # server as "/usr/local/apache/logs/foo.log".
>>>>> #
>>>>>
>>>>> ### Section 1: Global Environment
>>>>> #
>>>>> # The directives in this section affect the overall operation of
>>>>> Apache,
>>>>> # such as the number of concurrent requests it can handle or where it
>>>>> # can find its configuration files.
>>>>> #
>>>>>
>>>>> #
>>>>> # ServerType is either inetd, or standalone. Inetd mode is only
>>>>> supported on
>>>>> # Unix platforms.
>>>>> #
>>>>> ServerType standalone
>>>>>
>>>>> #
>>>>> # ServerRoot: The top of the directory tree under which the server's
>>>>> # configuration, error, and log files are kept.
>>>>> #
>>>>> # NOTE! If you intend to place this on an NFS (or otherwise network)
>>>>> # mounted filesystem then please read the LockFile documentation
>>>>> # (available at
>>>>> <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
>>>>> # you will save yourself a lot of trouble.
>>>>> #
>>>>> ServerRoot "/srv/www"
>>>>>
>>>>> #
>>>>> # The LockFile directive sets the path to the lockfile used when
>>>>> Apache
>>>>> # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
>>>>> # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be
>>>>> left at
>>>>> # its default value. The main reason for changing it is if the logs
>>>>> # directory is NFS mounted, since the lockfile MUST BE STORED ON A
>>>>> LOCAL
>>>>> # DISK. The PID of the main server process is automatically
>>>>> appended to
>>>>> # the filename. #
>>>>> LockFile /var/lock/subsys/httpd/httpd.accept.lock
>>>>>
>>>>> #
>>>>> # PidFile: The file in which the server should record its process
>>>>> # identification number when it starts.
>>>>> #
>>>>> PidFile /var/run/httpd.pid
>>>>>
>>>>> #
>>>>> # ScoreBoardFile: File used to store internal server process
>>>>> information.
>>>>> # Not all architectures require this. But if yours does (you'll
>>>>> know because
>>>>> # this file will be created when you run Apache) then you *must*
>>>>> ensure that
>>>>> # no two invocations of Apache share the same scoreboard file.
>>>>> #
>>>>> ScoreBoardFile /var/run/httpd.scoreboard
>>>>>
>>>>> #
>>>>> # In the standard configuration, the server will process
>>>>> httpd.conf (this # file, specified by the -f command line option),
>>>>> srm.conf, and access.conf # in that order. The latter two files
>>>>> are now distributed empty, as it is # recommended that all
>>>>> directives be kept in a single file for simplicity. # The
>>>>> commented-out values below are the built-in defaults. You can
>>>>> have the # server ignore these files altogether by using
>>>>> "/dev/null" (for Unix) or
>>>>> # "nul" (for Win32) for the arguments to the directives.
>>>>> #
>>>>> #ResourceConfig conf/srm.conf
>>>>> #AccessConfig conf/access.conf
>>>>>
>>>>> #
>>>>> # Timeout: The number of seconds before receives and sends time out.
>>>>> #
>>>>> Timeout 300
>>>>>
>>>>> #
>>>>> # KeepAlive: Whether or not to allow persistent connections (more
>>>>> than
>>>>> # one request per connection). Set to "Off" to deactivate.
>>>>> #
>>>>> KeepAlive On
>>>>>
>>>>> #
>>>>> # MaxKeepAliveRequests: The maximum number of requests to allow
>>>>> # during a persistent connection. Set to 0 to allow an unlimited
>>>>> amount.
>>>>> # We recommend you leave this number high, for maximum performance.
>>>>> #
>>>>> MaxKeepAliveRequests 100
>>>>>
>>>>> #
>>>>> # KeepAliveTimeout: Number of seconds to wait for the next request
>>>>> from the
>>>>> # same client on the same connection.
>>>>> #
>>>>> KeepAliveTimeout 15
>>>>>
>>>>> #
>>>>> # Server-pool size regulation. Rather than making you guess how many
>>>>> # server processes you need, Apache dynamically adapts to the load it
>>>>> # sees --- that is, it tries to maintain enough server processes to
>>>>> # handle the current load, plus a few spare servers to handle
>>>>> transient
>>>>> # load spikes (e.g., multiple simultaneous requests from a single
>>>>> # Netscape browser).
>>>>> #
>>>>> # It does this by periodically checking how many servers are waiting
>>>>> # for a request. If there are fewer than MinSpareServers, it creates
>>>>> # a new spare. If there are more than MaxSpareServers, some of the
>>>>> # spares die off. The default values are probably OK for most sites.
>>>>> #
>>>>>
>>>>> # Note: these two values are set by SuSEconfig according to the
>>>>> setting of the
>>>>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache!
>>>>> MinSpareServers 1
>>>>> MaxSpareServers 1
>>>>>
>>>>> #
>>>>> # Number of servers to start initially --- should be a reasonable
>>>>> ballpark
>>>>> # figure.
>>>>> #
>>>>>
>>>>> # Note: this value is set by SuSEconfig according to the setting
>>>>> of the
>>>>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! StartServers 1
>>>>>
>>>>> #
>>>>> # Limit on total number of servers running, i.e., limit on the number
>>>>> # of clients who can simultaneously connect --- if this limit is ever
>>>>> # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO
>>>>> LOW.
>>>>> # It is intended mainly as a brake to keep a runaway server from
>>>>> taking
>>>>> # the system with it as it spirals down...
>>>>> #
>>>>>
>>>>> # Note: this value is set by SuSEconfig according to the setting
>>>>> of the
>>>>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! MaxClients 150
>>>>>
>>>>> #
>>>>> # MaxRequestsPerChild: the number of requests each child process is
>>>>> # allowed to process before the child dies. The child will exit so
>>>>> # as to avoid problems after prolonged use when Apache (and maybe the
>>>>> # libraries it uses) leak memory or other resources. On most
>>>>> systems, this
>>>>> # isn't really needed, but a few (such as Solaris) do have notable
>>>>> leaks
>>>>> # in the libraries. For these platforms, set to something like 10000
>>>>> # or so; a setting of 0 means unlimited.
>>>>> #
>>>>> # NOTE: This value does not include keepalive requests after the
>>>>> initial
>>>>> # request per connection. For example, if a child process
>>>>> handles
>>>>> # an initial request and 10 subsequent "keptalive" requests, it
>>>>> # would only count as 1 request towards this limit.
>>>>> #
>>>>> MaxRequestsPerChild 0
>>>>>
>>>>> #
>>>>> # Listen: Allows you to bind Apache to specific IP addresses and/or
>>>>> # ports, in addition to the default. See also the <VirtualHost>
>>>>> # directive.
>>>>> #
>>>>> #Listen 3000
>>>>> #Listen 12.34.56.78:80
>>>>>
>>>>> #
>>>>> # BindAddress: You can support virtual hosts with this option.
>>>>> This directive
>>>>> # is used to tell the server which IP address to listen to. It can
>>>>> either
>>>>> # contain "*", an IP address, or a fully qualified Internet domain
>>>>> name.
>>>>> # See also the <VirtualHost> and Listen directives.
>>>>> #
>>>>> #BindAddress *
>>>>>
>>>>> #
>>>>> # Dynamic Shared Object (DSO) Support
>>>>> #
>>>>> # To be able to use the functionality of a module which was built
>>>>> as a DSO you
>>>>> # have to place corresponding `LoadModule' lines at this location
>>>>> so the
>>>>> # directives contained in it are actually available _before_ they
>>>>> are used.
>>>>> # Please read the file http://httpd.apache.org/docs/dso.html for more
>>>>> # details about the DSO mechanism and run `httpd -l' for the list
>>>>> of already
>>>>> # built-in (statically linked and thus always available) modules
>>>>> in your httpd
>>>>> # binary.
>>>>> #
>>>>> # Note: The order in which modules are loaded is important. Don't
>>>>> change
>>>>> # the order below without expert advice.
>>>>>
>>>>> # Note:
>>>>> #
>>>>> # The file that is included after the LoadModule statements is
>>>>> generated # by SuSEconfig according to #
>>>>> # 1) which modules (ones not included with apache) are installed
>>>>> # 2) the settings in /etc/sysconfig/apache
>>>>> # # SuSEconfig uses the /etc/httpd/modules/* files that come with
>>>>> each module # to determine the necessary directives. # # Apache no
>>>>> longer needs to be started with '-D <modules>' switches (with #
>>>>> the exception of mod_ssl, which has a lot of conditional statements).
>>>>>
>>>>> # Example:
>>>>> # LoadModule foo_module libexec/mod_foo.so
>>>>> LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
>>>>> LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
>>>>> LoadModule env_module /usr/lib/apache/mod_env.so
>>>>> LoadModule define_module /usr/lib/apache/mod_define.so
>>>>> LoadModule config_log_module /usr/lib/apache/mod_log_config.so
>>>>> LoadModule agent_log_module /usr/lib/apache/mod_log_agent.so
>>>>> LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
>>>>> LoadModule mime_magic_module /usr/lib/apache/mod_mime_magic.so
>>>>> LoadModule mime_module /usr/lib/apache/mod_mime.so
>>>>> LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
>>>>> LoadModule status_module /usr/lib/apache/mod_status.so
>>>>> LoadModule info_module /usr/lib/apache/mod_info.so
>>>>> LoadModule includes_module /usr/lib/apache/mod_include.so
>>>>> LoadModule autoindex_module /usr/lib/apache/mod_autoindex.so
>>>>> LoadModule dir_module /usr/lib/apache/mod_dir.so
>>>>> LoadModule cgi_module /usr/lib/apache/mod_cgi.so
>>>>> LoadModule asis_module /usr/lib/apache/mod_asis.so
>>>>> LoadModule imap_module /usr/lib/apache/mod_imap.so
>>>>> LoadModule action_module /usr/lib/apache/mod_actions.so
>>>>> LoadModule speling_module /usr/lib/apache/mod_speling.so
>>>>> # mod_userdir will be included below by SuSEconfig if
>>>>> HTTPD_SEC_PUBLIC_HTML=yes
>>>>> LoadModule alias_module /usr/lib/apache/mod_alias.so
>>>>> LoadModule rewrite_module /usr/lib/apache/mod_rewrite.so
>>>>> LoadModule access_module /usr/lib/apache/mod_access.so
>>>>> LoadModule auth_module /usr/lib/apache/mod_auth.so
>>>>> LoadModule anon_auth_module /usr/lib/apache/mod_auth_anon.so
>>>>> LoadModule dbm_auth_module /usr/lib/apache/mod_auth_dbm.so
>>>>> LoadModule db_auth_module /usr/lib/apache/mod_auth_db.so
>>>>> LoadModule digest_module /usr/lib/apache/mod_digest.so
>>>>> LoadModule proxy_module /usr/lib/apache/libproxy.so
>>>>> LoadModule cern_meta_module /usr/lib/apache/mod_cern_meta.so
>>>>> LoadModule expires_module /usr/lib/apache/mod_expires.so
>>>>> LoadModule headers_module /usr/lib/apache/mod_headers.so
>>>>> LoadModule usertrack_module /usr/lib/apache/mod_usertrack.so
>>>>> LoadModule unique_id_module /usr/lib/apache/mod_unique_id.so
>>>>> LoadModule setenvif_module /usr/lib/apache/mod_setenvif.so
>>>>> <IfDefine DUMMYSSL>
>>>>> LoadModule ssl_module /usr/lib/apache/libssl.so
>>>>> </IfDefine>
>>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>>>
>>>>>
>>>>>
>>>>> Include /etc/httpd/suse_loadmodule.conf
>>>>>
>>>>>
>>>>> # Reconstruction of the complete module list from all available
>>>>> modules
>>>>> # (static and shared ones) to achieve correct module execution
>>>>> order.
>>>>> # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS,
>>>>> TOO]
>>>>> ClearModuleList
>>>>> AddModule mod_mmap_static.c
>>>>> AddModule mod_vhost_alias.c
>>>>> AddModule mod_env.c
>>>>> AddModule mod_define.c
>>>>> AddModule mod_log_config.c
>>>>> AddModule mod_log_agent.c
>>>>> AddModule mod_log_referer.c
>>>>> AddModule mod_mime_magic.c
>>>>> AddModule mod_mime.c
>>>>> AddModule mod_negotiation.c
>>>>> AddModule mod_status.c
>>>>> AddModule mod_info.c
>>>>> AddModule mod_include.c
>>>>> AddModule mod_autoindex.c
>>>>> AddModule mod_dir.c
>>>>> AddModule mod_cgi.c
>>>>> AddModule mod_asis.c
>>>>> AddModule mod_imap.c
>>>>> AddModule mod_actions.c
>>>>> AddModule mod_speling.c
>>>>> # mod_userdir will be included below by SuSEconfig if
>>>>> HTTPD_SEC_PUBLIC_HTML=yes
>>>>> AddModule mod_alias.c
>>>>> AddModule mod_rewrite.c
>>>>> AddModule mod_access.c
>>>>> AddModule mod_auth.c
>>>>> AddModule mod_auth_anon.c
>>>>> AddModule mod_auth_dbm.c
>>>>> AddModule mod_auth_db.c
>>>>> AddModule mod_digest.c
>>>>> AddModule mod_proxy.c
>>>>> AddModule mod_cern_meta.c
>>>>> AddModule mod_expires.c
>>>>> AddModule mod_headers.c
>>>>> AddModule mod_usertrack.c
>>>>> AddModule mod_unique_id.c
>>>>> AddModule mod_so.c
>>>>> AddModule mod_setenvif.c
>>>>> <IfDefine DUMMYSSL>
>>>>> AddModule mod_ssl.c
>>>>> </IfDefine>
>>>>>
>>>>> AddModule mod_jk.c
>>>>>
>>>>>
>>>>>
>>>>> # Again, the following file is generated by SuSEconfig for modules
>>>>> that actually
>>>>> # have been installed
>>>>>
>>>>> Include /etc/httpd/suse_addmodule.conf
>>>>>
>>>>>
>>>>> #
>>>>> # ExtendedStatus controls whether Apache will generate "full" status
>>>>> # information (ExtendedStatus On) or just basic information
>>>>> (ExtendedStatus
>>>>> # Off) when the "server-status" handler is called. The default is
>>>>> Off.
>>>>> #
>>>>> ExtendedStatus On
>>>>>
>>>>>
>>>>> #
>>>>> # To enable mod_dav, add the following directive to the appropriate
>>>>> # container(s) in the httpd.conf file:
>>>>> #
>>>>> <IfModule mod_dav.c>
>>>>> DavLockDB /var/lock/DAVLock
>>>>> </IfModule>
>>>>>
>>>>>
>>>>> #
>>>>> #
>>>>> # enable the SSI (Server Side Includes) execution for +x files
>>>>> #
>>>>> <IfModule mod_include.c>
>>>>> XBitHack on
>>>>> </IfModule>
>>>>>
>>>>>
>>>>> ### Section 2: 'Main' server configuration
>>>>> #
>>>>> # The directives in this section set up the values used by the 'main'
>>>>> # server, which responds to any requests that aren't handled by a
>>>>> # <VirtualHost> definition. These values also provide defaults for
>>>>> # any <VirtualHost> containers you may define later in the file.
>>>>> #
>>>>> # All of these directives may appear inside <VirtualHost> containers,
>>>>> # in which case these default settings will be overridden for the
>>>>> # virtual host being defined.
>>>>> #
>>>>>
>>>>> #
>>>>> # If your ServerType directive (set earlier in the 'Global
>>>>> Environment'
>>>>> # section) is set to "inetd", the next few directives don't have any
>>>>> # effect since their settings are defined by the inetd configuration.
>>>>> # Skip ahead to the ServerAdmin directive.
>>>>> #
>>>>>
>>>>> #
>>>>> # Port: The port to which the standalone server listens. For
>>>>> # ports < 1023, you will need httpd to be run as root initially.
>>>>> #
>>>>> Port 80
>>>>>
>>>>> ##
>>>>> ## SSL Support
>>>>> ##
>>>>> ## When we also provide SSL we have to listen to the ## standard
>>>>> HTTP port (see above) and to the HTTPS port
>>>>> ##
>>>>> <IfDefine SSL>
>>>>> Listen 80
>>>>> Listen 443
>>>>> </IfDefine>
>>>>>
>>>>> #
>>>>> # If you wish httpd to run as a different user or group, you must run
>>>>> # httpd as root initially and it will switch. #
>>>>> # User/Group: The name (or #number) of the user/group to run httpd
>>>>> as.
>>>>> # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
>>>>> # . On HPUX you may not be able to use shared memory as nobody,
>>>>> and the
>>>>> # suggested workaround is to create a user www and use that user.
>>>>> # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
>>>>> # when the value of (unsigned)Group is above 60000; # don't use
>>>>> Group nogroup on these systems!
>>>>> #
>>>>> User wwwrun
>>>>> Group nogroup
>>>>>
>>>>> #
>>>>> # ServerAdmin: Your address, where problems with the server should be
>>>>> # e-mailed. This address appears on some server-generated pages,
>>>>> such
>>>>> # as error documents.
>>>>> #
>>>>>
>>>>> # Note: this email address is set by SuSEconfig according to the
>>>>> setting of the
>>>>> # HTTPD_SEC_SERVERADMIN variable in /etc/sysconfig/apache!
>>>>> ServerAdmin webmaster@elbassan.tre-sc.gov.br
>>>>>
>>>>> #
>>>>> # ServerName allows you to set a host name which is sent back to
>>>>> clients for
>>>>> # your server if it's different than the one the program would get
>>>>> (i.e., use
>>>>> # "www" instead of the host's real name).
>>>>> #
>>>>> # Note: You cannot just invent host names and hope they work. The
>>>>> name you # define here must be a valid DNS name for your host. If
>>>>> you don't understand
>>>>> # this, ask your network administrator.
>>>>> # If your host doesn't have a registered DNS name, enter its IP
>>>>> address here.
>>>>> # You will have to access it by its address (e.g.,
>>>>> http://123.45.67.89/)
>>>>> # anyway, and this will make redirections work in a sensible way.
>>>>> #
>>>>> # 127.0.0.1 is the TCP/IP local loop-back address, often named
>>>>> localhost. Your # machine always knows itself by this address. If
>>>>> you use Apache strictly for # local testing and development, you
>>>>> may use 127.0.0.1 as the server name.
>>>>> #
>>>>>
>>>>> # Note: the host name is set by SuSEconfig according to the
>>>>> setting of the
>>>>> # FQHOSTNAME variable in /etc/sysconfig/network/config!
>>>>> ServerName elbassan.tre-sc.gov.br
>>>>>
>>>>> #
>>>>> # DocumentRoot: The directory out of which you will serve your
>>>>> # documents. By default, all requests are taken from this
>>>>> directory, but
>>>>> # symbolic links and aliases may be used to point to other locations.
>>>>> #
>>>>> DocumentRoot "/srv/www/htdocs"
>>>>>
>>>>> #
>>>>> # Each directory to which Apache has access, can be configured
>>>>> with respect
>>>>> # to which services and features are allowed and/or disabled in that
>>>>> # directory (and its subdirectories). #
>>>>> # First, we configure the "default" to be a very restrictive set
>>>>> of # permissions. #
>>>>> <Directory />
>>>>> AuthUserFile /etc/httpd/passwd
>>>>> AuthGroupFile /etc/httpd/group
>>>>>
>>>>> Options -FollowSymLinks +Multiviews
>>>>> AllowOverride None
>>>>>
>>>>> </Directory>
>>>>>
>>>>>
>>>>> #
>>>>> # Note that from this point forward you must specifically allow
>>>>> # particular features to be enabled - so if something's not
>>>>> working as
>>>>> # you might expect, make sure that you have specifically enabled it
>>>>> # below.
>>>>> #
>>>>>
>>>>> #
>>>>> # This should be changed to whatever you set DocumentRoot to.
>>>>> #
>>>>> <Directory "/srv/www/htdocs">
>>>>>
>>>>> #
>>>>> # This may also be "None", "All", or any combination of "Indexes",
>>>>> # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
>>>>> #
>>>>> # Note that "MultiViews" must be named *explicitly* --- "Options All"
>>>>> # doesn't give it to you.
>>>>> #
>>>>> Options Indexes -FollowSymLinks +Includes MultiViews
>>>>>
>>>>> #
>>>>> # This controls which options the .htaccess files in directories can
>>>>> # override. Can also be "All", or any combination of "Options",
>>>>> "FileInfo", # "AuthConfig", and "Limit"
>>>>> #
>>>>> AllowOverride None
>>>>>
>>>>> #
>>>>> # Controls who can get stuff from this server.
>>>>> #
>>>>> Order allow,deny
>>>>> Allow from all
>>>>>
>>>>>
>>>>> #
>>>>> # disable WebDAV by default for security reasons. #
>>>>> <IfModule mod_dav.c>
>>>>> DAV Off
>>>>> </IfModule>
>>>>>
>>>>> #
>>>>> # Enable SSI (Server Side Includes) for the demo index.html pages,
>>>>> as some of the content
>>>>> # is created dynamically. This should be disabled when setting up
>>>>> a productive
>>>>> # server.
>>>>> <Files /srv/www/htdocs/index.htm*>
>>>>> Options -FollowSymLinks +Includes +MultiViews
>>>>> </Files>
>>>>>
>>>>> #
>>>>> # Protect the php3 test page, so it cannot be viewed from an
>>>>> outside system. #
>>>>> <Files test.php3>
>>>>> Order deny,allow
>>>>> deny from all
>>>>> allow from localhost
>>>>> </Files>
>>>>>
>>>>> </Directory>
>>>>>
>>>>> #
>>>>> # UserDir: The name of the directory which is appended onto a
>>>>> user's home
>>>>> # directory if a ~user request is received.
>>>>>
>>>>> # Note: # The next three lines are commented out here. These
>>>>> directives and the access # control section have been put into
>>>>> /etc/httpd/suse_public_html.conf. # If the variable
>>>>> HTTPD_SEC_PUBLIC_HTML in /etc/sysconfig/apache # is set to "yes"
>>>>> (default), SuSEconfig will include that file via #
>>>>> /etc/httpd/suse_include.conf. # Also note that for the
>>>>> /home/*/public_html directories to be browsable the # executable
>>>>> flag must be set on the /home/* directories.
>>>>> #
>>>>> # <IfModule mod_userdir.c>
>>>>> # UserDir public_html
>>>>> # </IfModule>
>>>>>
>>>>> #
>>>>> # Control access to UserDir directories. The following is an example
>>>>> # for a site where these directories are restricted to read-only.
>>>>> #
>>>>> #<Directory /home/*/public_html>
>>>>> # AllowOverride FileInfo AuthConfig Limit
>>>>> # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
>>>>> # <Limit GET POST OPTIONS PROPFIND>
>>>>> # Order allow,deny
>>>>> # Allow from all
>>>>> # </Limit>
>>>>> # <LimitExcept GET POST OPTIONS PROPFIND>
>>>>> # Order deny,allow
>>>>> # Deny from all
>>>>> # </LimitExcept>
>>>>> #</Directory>
>>>>>
>>>>> #
>>>>> # DirectoryIndex: Name of the file or files to use as a
>>>>> pre-written HTML
>>>>> # directory index. Separate multiple entries with spaces.
>>>>> #
>>>>> <IfModule mod_dir.c>
>>>>> DirectoryIndex index.html
>>>>> </IfModule>
>>>>>
>>>>> #
>>>>> # AccessFileName: The name of the file to look for in each directory
>>>>> # for access control information.
>>>>> #
>>>>> AccessFileName .htaccess
>>>>>
>>>>> #
>>>>> # The following lines prevent .htaccess files from being viewed by
>>>>> # Web clients. Since .htaccess files often contain authorization
>>>>> # information, access is disallowed for security reasons. Comment
>>>>> # these lines out if you want Web visitors to see the contents of
>>>>> # .htaccess files. If you change the AccessFileName directive above,
>>>>> # be sure to make the corresponding changes here.
>>>>> #
>>>>> # Also, folks tend to use names such as .htpasswd for password
>>>>> # files, so this will protect those as well.
>>>>> #
>>>>> <Files ~ "^\.ht">
>>>>> Order allow,deny
>>>>> Deny from all
>>>>> Satisfy All
>>>>> </Files>
>>>>>
>>>>> #
>>>>> # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
>>>>> with each
>>>>> # document that was negotiated on the basis of content. This asks
>>>>> proxy
>>>>> # servers not to cache the document. Uncommenting the following
>>>>> line disables
>>>>> # this behavior, and proxies will be allowed to cache the documents.
>>>>> #
>>>>> #CacheNegotiatedDocs
>>>>>
>>>>> #
>>>>> # UseCanonicalName: (new for 1.3) With this setting turned on,
>>>>> whenever
>>>>> # Apache needs to construct a self-referencing URL (a URL that
>>>>> refers back
>>>>> # to the server the response is coming from) it will use
>>>>> ServerName and
>>>>> # Port to form a "canonical" name. With this setting off, Apache
>>>>> will
>>>>> # use the hostname:port that the client supplied, when possible.
>>>>> This
>>>>> # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
>>>>> #
>>>>> UseCanonicalName On
>>>>>
>>>>> #
>>>>> # TypesConfig describes where the mime.types file (or equivalent) is
>>>>> # to be found.
>>>>> #
>>>>> <IfModule mod_mime.c>
>>>>> TypesConfig /etc/httpd/mime.types
>>>>> </IfModule>
>>>>>
>>>>> #
>>>>> # DefaultType is the default MIME type the server will use for a
>>>>> document
>>>>> # if it cannot otherwise determine one, such as from filename
>>>>> extensions.
>>>>> # If your server contains mostly text or HTML documents,
>>>>> "text/plain" is
>>>>> # a good value. If most of your content is binary, such as
>>>>> applications
>>>>> # or images, you may want to use "application/octet-stream"
>>>>> instead to
>>>>> # keep browsers from trying to display binary files as though they
>>>>> are
>>>>> # text.
>>>>> #
>>>>> DefaultType text/plain
>>>>>
>>>>> #
>>>>> # The mod_mime_magic module allows the server to use various hints
>>>>> from the
>>>>> # contents of the file itself to determine its type. The
>>>>> MIMEMagicFile
>>>>> # directive tells the module where the hint definitions are located.
>>>>> # mod_mime_magic is not part of the default server (you have to add
>>>>> # it yourself with a LoadModule [see the DSO paragraph in the 'Global
>>>>> # Environment' section], or recompile the server and include
>>>>> mod_mime_magic
>>>>> # as part of the configuration), so it's enclosed in an <IfModule>
>>>>> container.
>>>>> # This means that the MIMEMagicFile directive will only be
>>>>> processed if the
>>>>> # module is part of the server.
>>>>> #
>>>>> <IfModule mod_mime_magic.c>
>>>>> MIMEMagicFile /etc/httpd/magic
>>>>> </IfModule>
>>>>>
>>>>> #
>>>>> # HostnameLookups: Log the names of clients or just their IP
>>>>> addresses
>>>>> # e.g., www.apache.org (on) or 204.62.129.132 (off).
>>>>> # The default is off because it'd be overall better for the net if
>>>>> people
>>>>> # had to knowingly turn this feature on, since enabling it means that
>>>>> # each client request will result in AT LEAST one lookup request
>>>>> to the
>>>>> # nameserver.
>>>>> #
>>>>> HostnameLookups Off
>>>>>
>>>>>
>>>>> # The following are the directives necessary to get mod_backhand
>>>>> operational.
>>>>> # You will need to add Backhand directives to any directories
>>>>> that you wish
>>>>> # to balance.. For example, you could put the following inside a
>>>>> # ScriptAliased /cgi-cpu/ directory (for scripts that are cpu hogs)
>>>>>
>>>>> # <Directory ...>
>>>>> # ... stuff ...
>>>>> # Backhand byAge
>>>>> # Backhand byRandom
>>>>> # Backhand byLogWindow
>>>>> # Backhand byCPU
>>>>> # ... stuff ...
>>>>> # </Directory>
>>>>>
>>>>> # This will eliminate servers you haven't heard from for a while
>>>>> # Then randomize those remaining
>>>>> # Then take the first log(n) (log base 2 of course)
>>>>> # Then use the one with the highest CPU idle time
>>>>>
>>>>> <IfModule mod_backhand.c>
>>>>> # UnixSocketDir is were the mod_backhand-Arriba file is stored
>>>>> # (how fast your machine is). This directory must be readable
>>>>> and writable
>>>>> # by euid of apache (wwwrun) because the children have dropped
>>>>> privileges
>>>>> # before they connect to a UNIX domain socket in this directory.
>>>>> # This directive is singular.
>>>>> #
>>>>> # MulticastStats of the form [<IP ADDR>] <BROADCAST ADDR>:<PORT>
>>>>> will set
>>>>> # mod_backhand to broadcast server statistics on that address
>>>>> advertising
>>>>> # for a server on <IP ADDR> or gethostbyname(gethostname())
>>>>> # MulticastStats of the form [<IP ADDR>] <MULTICAST
>>>>> ADDR>:<PORT>,<ttl> will
>>>>> # set mod_backhand to multicast server statistics on that address
>>>>> # advertising for a server on <IP ADDR> or
>>>>> gethostbyname(gethostname())
>>>>> # This directive is singular.
>>>>> #
>>>>> # AcceptStats <a.b.c.d>[/<mask>] (like 10.0.0.4 or 10.0.0.0/24)
>>>>> will accept
>>>>> # statistics originating from that IP or IP network.
>>>>> # This option can be cascaded.
>>>>>
>>>>> UnixSocketDir /var/lib/backhand
>>>>> # MulticastStats 128.220.221.255:4445
>>>>> # MulticastStats 225.220.221.20:4445,1
>>>>> # AcceptStats 128.220.221.0/24
>>>>>
>>>>> # Note that you _must_ configure the MulticastStats/AcceptStats
>>>>> directives, # otherwise apache will segfault!
>>>>>
>>>>> # This is a status of sorts. Visit it and see how valuable it is
>>>>> to you.
>>>>> <Location "/backhand/">
>>>>> SetHandler backhand-handler
>>>>> </Location>
>>>>> </IfModule>
>>>>>
>>>>>
>>>>> #
>>>>> # ErrorLog: The location of the error log file.
>>>>> # If you do not specify an ErrorLog directive within a <VirtualHost>
>>>>> # container, error messages relating to that virtual host will be
>>>>> # logged here. If you *do* define an error logfile for a
>>>>> <VirtualHost>
>>>>> # container, that host's errors will be logged there and not here.
>>>>> #
>>>>> ErrorLog /var/log/httpd/error_log
>>>>>
>>>>> #
>>>>> # LogLevel: Control the number of messages logged to the error_log.
>>>>> # Possible values include: debug, info, notice, warn, error, crit,
>>>>> # alert, emerg.
>>>>> #
>>>>> LogLevel warn
>>>>>
>>>>> #
>>>>> # The following directives define some format nicknames for use with
>>>>> # a CustomLog directive (see below).
>>>>> #
>>>>> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
>>>>> \"%{User-Agent}i\"" combined
>>>>> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>>>>> LogFormat "%{Referer}i -> %U" referer
>>>>> LogFormat "%{User-agent}i" agent
>>>>>
>>>>> #
>>>>> # The location and format of the access logfile (Common Logfile
>>>>> Format).
>>>>> # If you do not define any access logfiles within a <VirtualHost>
>>>>> # container, they will be logged here. Contrariwise, if you *do*
>>>>> # define per-<VirtualHost> access logfiles, transactions will be
>>>>> # logged therein and *not* in this file.
>>>>> #
>>>>> CustomLog /var/log/httpd/access_log common
>>>>>
>>>>> #
>>>>> # If you would like to have agent and referer logfiles, uncomment the
>>>>> # following directives.
>>>>> #
>>>>> #CustomLog /var/log/httpd/referer_log referer
>>>>> #CustomLog /var/log/httpd/agent_log agent
>>>>>
>>>>> #
>>>>> # If you prefer a single logfile with access, agent, and referer
>>>>> information
>>>>> # (Combined Logfile Format) you can use the following directive.
>>>>> #
>>>>> #CustomLog /var/log/httpd/access_log combined
>>>>>
>>>>> #
>>>>> # Optionally add a line containing the server version and virtual
>>>>> host
>>>>> # name to server-generated pages (error documents, FTP directory
>>>>> listings,
>>>>> # mod_status and mod_info output etc., but not CGI generated
>>>>> documents).
>>>>> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
>>>>> # Set to one of: On | Off | EMail
>>>>> #
>>>>>
>>>>> # Note: this is set by SuSEconfig according to the setting of the
>>>>> # HTTPD_SEC_SAY_FULLNAME variable in /etc/sysconfig/apache!
>>>>> ServerSignature On
>>>>>
>>>>>
>>>>> # EBCDIC configuration:
>>>>> # (only for mainframes using the EBCDIC codeset, currently one of:
>>>>> # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
>>>>> # The following default configuration assumes that "text files"
>>>>> # are stored in EBCDIC (so that you can operate on them using the
>>>>> # normal POSIX tools like grep and sort) while "binary files" are
>>>>> # stored with identical octets as on an ASCII machine.
>>>>> #
>>>>> # The directives are evaluated in configuration file order, with
>>>>> # the EBCDICConvert directives applied before EBCDICConvertByType.
>>>>> #
>>>>> # If you want to have ASCII HTML documents and EBCDIC HTML documents
>>>>> # at the same time, you can use the file extension to force
>>>>> # conversion off for the ASCII documents:
>>>>> # > AddType text/html .ahtml
>>>>> # > EBCDICConvert Off=InOut .ahtml
>>>>> #
>>>>> # EBCDICConvertByType On=InOut text/* message/* multipart/*
>>>>> # EBCDICConvertByType On=In application/x-www-form-urlencoded
>>>>> # EBCDICConvertByType On=InOut application/postscript model/vrml
>>>>> # EBCDICConvertByType Off=InOut */*
>>>>>
>>>>>
>>>>> #
>>>>> # Aliases: Add here as many aliases as you need (with no limit).
>>>>> The format is # Alias fakename realname
>>>>> #
>>>>> <IfModule mod_alias.c>
>>>>>
>>>>> #
>>>>> # Note that if you include a trailing / on fakename then the
>>>>> server will
>>>>> # require it to be present in the URL. So "/icons" isn't
>>>>> aliased in this
>>>>> # example, only "/icons/". If the fakename is
>>>>> slash-terminated, then the # realname must also be slash
>>>>> terminated, and if the fakename omits the # trailing slash, the
>>>>> realname must also omit it.
>>>>> #
>>>>> Alias /icons/ "/srv/www/icons/"
>>>>>
>>>>> <Directory "/srv/www/icons">
>>>>> Options Indexes MultiViews
>>>>> AllowOverride None
>>>>> Order allow,deny
>>>>> Allow from all
>>>>> </Directory>
>>>>>
>>>>> # This Alias will project the on-line documentation tree under
>>>>> /manual/
>>>>> # even if you change the DocumentRoot. Comment it if you don't
>>>>> want to # provide access to the on-line documentation.
>>>>> #
>>>>> Alias /manual/ "/srv/www/htdocs/manual/"
>>>>>
>>>>> <Directory "/srv/www/htdocs/manual">
>>>>> Options Indexes FollowSymlinks MultiViews
>>>>> AllowOverride None
>>>>> Order allow,deny
>>>>> Allow from all
>>>>> </Directory>
>>>>>
>>>>> #
>>>>> # ScriptAlias: This controls which directories contain server
>>>>> scripts.
>>>>> # ScriptAliases are essentially the same as Aliases, except that
>>>>> # documents in the realname directory are treated as
>>>>> applications and
>>>>> # run by the server when requested rather than as documents
>>>>> sent to the client.
>>>>> # The same rules about trailing "/" apply to ScriptAlias
>>>>> directives as to
>>>>> # Alias.
>>>>> #
>>>>> ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"
>>>>>
>>>>> <IfModule mod_perl.c>
>>>>> # Provide two aliases to the same cgi-bin directory, # to
>>>>> see the effects of the 2 different mod_perl modes.
>>>>> # for Apache::Registry Mode
>>>>> ScriptAlias /perl/ "/srv/www/cgi-bin/"
>>>>> # for Apache::Perlrun Mode
>>>>> ScriptAlias /cgi-perl/ "/srv/www/cgi-bin/"
>>>>> </IfModule>
>>>>> #
>>>>> # "/srv/www/cgi-bin" should be changed to whatever your
>>>>> ScriptAliased
>>>>> # CGI directory exists, if you have that configured.
>>>>> #
>>>>> <Directory "/srv/www/cgi-bin">
>>>>> AllowOverride None
>>>>> Options None
>>>>> Order allow,deny
>>>>> Allow from all
>>>>> </Directory>
>>>>>
>>>>> </IfModule>
>>>>> # End of aliases.
>>>>>
>>>>>
>>>>> #
>>>>> # set /cgi-bin for CGI execution
>>>>> #
>>>>> <Location /cgi-bin>
>>>>> AllowOverride None
>>>>> Options +ExecCGI -Includes
>>>>> SetHandler cgi-script
>>>>> </Location>
>>>>>
>>>>> #
>>>>> # If mod_perl is activated, load configuration information
>>>>> #
>>>>> <IfModule mod_perl.c>
>>>>> Perlrequire /usr/include/apache/modules/perl/startup.perl
>>>>> PerlModule Apache::Registry
>>>>>
>>>>> #
>>>>> # set Apache::Registry Mode for /perl Alias
>>>>> #
>>>>> <Location /perl>
>>>>> SetHandler perl-script
>>>>> PerlHandler Apache::Registry
>>>>> Options ExecCGI
>>>>> PerlSendHeader On
>>>>> </Location>
>>>>>
>>>>> #
>>>>> # set Apache::PerlRun Mode for /cgi-perl Alias
>>>>> #
>>>>> <Location /cgi-perl>
>>>>> SetHandler perl-script
>>>>> PerlHandler Apache::PerlRun
>>>>> Options ExecCGI
>>>>> PerlSendHeader On
>>>>> </Location>
>>>>>
>>>>> </IfModule>
>>>>>
>>>>>
>>>>>
>>>>> #
>>>>> # Redirect allows you to tell clients about documents which used
>>>>> to exist in
>>>>> # your server's namespace, but do not anymore. This allows you to
>>>>> tell the
>>>>> # clients where to look for the relocated document.
>>>>> # Format: Redirect old-URI new-URL
>>>>> #
>>>>>
>>>>> #
>>>>> # Directives controlling the display of server-generated directory
>>>>> listings.
>>>>> #
>>>>> <IfModule mod_autoindex.c>
>>>>>
>>>>> #
>>>>> # FancyIndexing is whether you want fancy directory indexing or
>>>>> standard
>>>>> #
>>>>> IndexOptions FancyIndexing
>>>>>
>>>>> #
>>>>> # AddIcon* directives tell the server which icon to show for
>>>>> different
>>>>> # files or filename extensions. These are only displayed for
>>>>> # FancyIndexed directories.
>>>>> #
>>>>> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>>>>>
>>>>> AddIconByType (TXT,/icons/text.gif) text/*
>>>>> AddIconByType (IMG,/icons/image2.gif) image/*
>>>>> AddIconByType (SND,/icons/sound2.gif) audio/*
>>>>> AddIconByType (VID,/icons/movie.gif) video/*
>>>>>
>>>>> AddIcon /icons/binary.gif .bin .exe
>>>>> AddIcon /icons/binhex.gif .hqx
>>>>> AddIcon /icons/tar.gif .tar
>>>>> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
>>>>> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
>>>>> AddIcon /icons/a.gif .ps .ai .eps
>>>>> AddIcon /icons/layout.gif .html .shtml .htm .pdf
>>>>> AddIcon /icons/text.gif .txt
>>>>> AddIcon /icons/c.gif .c
>>>>> AddIcon /icons/p.gif .pl .py
>>>>> AddIcon /icons/f.gif .for
>>>>> AddIcon /icons/dvi.gif .dvi
>>>>> AddIcon /icons/uuencoded.gif .uu
>>>>> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
>>>>> AddIcon /icons/tex.gif .tex
>>>>> AddIcon /icons/bomb.gif core
>>>>>
>>>>> AddIcon /icons/back.gif ..
>>>>> AddIcon /icons/hand.right.gif README
>>>>> AddIcon /icons/folder.gif ^^DIRECTORY^^
>>>>> AddIcon /icons/blank.gif ^^BLANKICON^^
>>>>>
>>>>> #
>>>>> # DefaultIcon is which icon to show for files which do not have
>>>>> an icon
>>>>> # explicitly set.
>>>>> #
>>>>> DefaultIcon /icons/unknown.gif
>>>>>
>>>>> #
>>>>> # AddDescription allows you to place a short description after
>>>>> a file in
>>>>> # server-generated indexes. These are only displayed for
>>>>> FancyIndexed
>>>>> # directories.
>>>>> # Format: AddDescription "description" filename
>>>>> #
>>>>> AddDescription "GZIP compressed document" .gz
>>>>> AddDescription "tar archive" .tar
>>>>> AddDescription "GZIP compressed tar archive" .tgz
>>>>>
>>>>> #
>>>>> # ReadmeName is the name of the README file the server will
>>>>> look for by
>>>>> # default, and append to directory listings.
>>>>> #
>>>>> # HeaderName is the name of a file which should be prepended to
>>>>> # directory indexes. #
>>>>> # If MultiViews are amongst the Options in effect, the server will
>>>>> # first look for name.html and include it if found. If name.html
>>>>> # doesn't exist, the server will then look for name.txt and
>>>>> include
>>>>> # it as plaintext if found.
>>>>> #
>>>>> ReadmeName README
>>>>> HeaderName HEADER
>>>>>
>>>>> #
>>>>> # IndexIgnore is a set of filenames which directory indexing
>>>>> should ignore
>>>>> # and not include in the listing. Shell-style wildcarding is
>>>>> permitted.
>>>>> #
>>>>> IndexIgnore .??* *~ *# RCS CVS *,v *,t
>>>>>
>>>>> </IfModule>
>>>>> # End of indexing directives.
>>>>>
>>>>> #
>>>>> # Document types.
>>>>> #
>>>>> <IfModule mod_mime.c>
>>>>>
>>>>> #
>>>>> # AddEncoding allows you to have certain browsers (Mosaic/X
>>>>> 2.1+) uncompress
>>>>> # information on the fly. Note: Not all browsers support this.
>>>>> # Despite the name similarity, the following Add* directives
>>>>> have nothing
>>>>> # to do with the FancyIndexing customization directives above.
>>>>> #
>>>>> AddEncoding x-compress Z
>>>>> AddEncoding x-gzip gz tgz
>>>>>
>>>>> #
>>>>> # AddLanguage allows you to specify the language of a document.
>>>>> You can
>>>>> # then use content negotiation to give a browser a file in a
>>>>> language
>>>>> # it can understand. #
>>>>> # Note 1: The suffix does not have to be the same as the
>>>>> language # keyword --- those with documents in Polish (whose
>>>>> net-standard # language code is pl) may wish to use
>>>>> "AddLanguage pl .po" to # avoid the ambiguity with the common
>>>>> suffix for perl scripts.
>>>>> #
>>>>> # Note 2: The example entries below illustrate that in quite
>>>>> # some cases the two character 'Language' abbreviation is not
>>>>> # identical to the two character 'Country' code for its country,
>>>>> # E.g. 'Danmark/dk' versus 'Danish/da'.
>>>>> #
>>>>> # Note 3: In the case of 'ltz' we violate the RFC by using a
>>>>> three char # specifier. But there is 'work in progress' to fix
>>>>> this and get # the reference data for rfc1766 cleaned up.
>>>>> #
>>>>> # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
>>>>> # French (fr) - German (de) - Greek-Modern (el)
>>>>> # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian
>>>>> Nynorsk (nn)
>>>>> # Portugese (pt) - Luxembourgeois* (ltz)
>>>>> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
>>>>> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
>>>>> # Russian (ru)
>>>>> #
>>>>> AddLanguage da .dk
>>>>> AddLanguage nl .nl
>>>>> AddLanguage en .en
>>>>> AddLanguage et .ee
>>>>> AddLanguage fr .fr
>>>>> AddLanguage de .de
>>>>> AddLanguage el .el
>>>>> AddLanguage he .he
>>>>> AddCharset ISO-8859-8 .iso8859-8
>>>>> AddLanguage it .it
>>>>> AddLanguage ja .ja
>>>>> AddCharset ISO-2022-JP .jis
>>>>> AddLanguage kr .kr
>>>>> AddCharset ISO-2022-KR .iso-kr
>>>>> AddLanguage nn .nn
>>>>> AddLanguage no .no
>>>>> AddLanguage pl .po
>>>>> AddCharset ISO-8859-2 .iso-pl
>>>>> AddLanguage pt .pt
>>>>> AddLanguage pt-br .pt-br
>>>>> AddLanguage ltz .lu
>>>>> AddLanguage ca .ca
>>>>> AddLanguage es .es
>>>>> AddLanguage sv .sv
>>>>> AddLanguage cz .cz
>>>>> AddLanguage ru .ru
>>>>> AddLanguage zh-tw .tw
>>>>> AddLanguage tw .tw
>>>>> AddCharset Big5 .Big5 .big5
>>>>> AddCharset WINDOWS-1251 .cp-1251
>>>>> AddCharset CP866 .cp866
>>>>> AddCharset ISO-8859-5 .iso-ru
>>>>> AddCharset KOI8-R .koi8-r
>>>>> AddCharset UCS-2 .ucs2
>>>>> AddCharset UCS-4 .ucs4
>>>>> AddCharset UTF-8 .utf8
>>>>>
>>>>> # LanguagePriority allows you to give precedence to some languages
>>>>> # in case of a tie during content negotiation.
>>>>> #
>>>>> # Just list the languages in decreasing order of preference. We
>>>>> have
>>>>> # more or less alphabetized them here. You probably want to
>>>>> change this.
>>>>> #
>>>>> <IfModule mod_negotiation.c>
>>>>> LanguagePriority en da nl et fr de el it ja kr no pl pt
>>>>> pt-br ru ltz ca es sv tw
>>>>> </IfModule>
>>>>>
>>>>> #
>>>>> # AddType allows you to tweak mime.types without actually
>>>>> editing it, or to
>>>>> # make certain files to be certain types.
>>>>> #
>>>>> AddType application/x-tar .tgz
>>>>>
>>>>> # Some more types:
>>>>>
>>>>> #
>>>>> # PHP 3.x:
>>>>> #
>>>>> <IfModule mod_php3.c>
>>>>> AddType application/x-httpd-php3 .php3
>>>>> AddType application/x-httpd-php3-source .phps
>>>>> AddType application/x-httpd-php3 .phtml
>>>>> </IfModule>
>>>>>
>>>>> #
>>>>> # PHP 4.x:
>>>>> #
>>>>> <IfModule mod_php4.c>
>>>>> AddType application/x-httpd-php .php
>>>>> AddType application/x-httpd-php .php4
>>>>> AddType application/x-httpd-php-source .phps
>>>>> </IfModule>
>>>>>
>>>>> #
>>>>> # mod_dtcl can execute tcl scripts
>>>>> #
>>>>> <IfModule mod_dtcl.c>
>>>>> AddType application/x-httpd-tcl .ttml
>>>>> AddType application/x-dtcl-tcl .tcl
>>>>> </IfModule>
>>>>>
>>>>> AddType text/vnd.wap.wml wml
>>>>> AddType text/vnd.wap.wmlscript wmls
>>>>> AddType application/vnd.wap.wmlc wmlc
>>>>> AddType application/vnd.wap.wmlscriptc wmlsc
>>>>> Addtype image/vnd.wap.wbmp wbmp
>>>>> #
>>>>> # AddHandler allows you to map certain file extensions to
>>>>> "handlers",
>>>>> # actions unrelated to filetype. These can be either built into
>>>>> the server
>>>>> # or added with the Action command (see below)
>>>>> #
>>>>> # If you want to use server side includes, or CGI outside
>>>>> # ScriptAliased directories, uncomment the following lines.
>>>>> #
>>>>> # To use CGI scripts:
>>>>> #
>>>>> AddHandler cgi-script .cgi
>>>>>
>>>>> #
>>>>> # To use server-parsed HTML files
>>>>> #
>>>>> AddType text/html .shtml
>>>>> AddHandler server-parsed .shtml
>>>>>
>>>>> #
>>>>> # Uncomment the following line to enable Apache's send-asis
>>>>> HTTP file
>>>>> # feature
>>>>> #
>>>>> #AddHandler send-as-is asis
>>>>>
>>>>> #
>>>>> # If you wish to use server-parsed imagemap files, use
>>>>> #
>>>>> #AddHandler imap-file map
>>>>>
>>>>> #
>>>>> # To enable type maps, you might want to use
>>>>> #
>>>>> #AddHandler type-map var
>>>>>
>>>>> </IfModule>
>>>>> # End of document types.
>>>>>
>>>>> #
>>>>> # Action lets you define media types that will execute a script
>>>>> whenever
>>>>> # a matching file is called. This eliminates the need for repeated
>>>>> URL
>>>>> # pathnames for oft-used CGI file processors.
>>>>> # Format: Action media/type /cgi-script/location
>>>>> # Format: Action handler-name /cgi-script/location
>>>>> #
>>>>>
>>>>> #
>>>>> # MetaDir: specifies the name of the directory in which Apache can
>>>>> find
>>>>> # meta information files. These files contain additional HTTP headers
>>>>> # to include when sending the document
>>>>> #
>>>>> #MetaDir .web
>>>>>
>>>>> #
>>>>> # MetaSuffix: specifies the file name suffix for the file
>>>>> containing the
>>>>> # meta information.
>>>>> #
>>>>> #MetaSuffix .meta
>>>>>
>>>>> #
>>>>> # Customizable error response (Apache style)
>>>>> # these come in three flavors
>>>>> #
>>>>> # 1) plain text
>>>>> #ErrorDocument 500 "The server made a boo boo.
>>>>> # n.b. the single leading (") marks it as text, it does not get
>>>>> output
>>>>> #
>>>>> # 2) local redirects
>>>>> #ErrorDocument 404 /missing.html
>>>>> # to redirect to local URL /missing.html
>>>>> #ErrorDocument 404 /cgi-bin/missing_handler.pl
>>>>> # N.B.: You can redirect to a script or a document using
>>>>> server-side-includes.
>>>>> #
>>>>> # 3) external redirects
>>>>> #ErrorDocument 402
>>>>> http://some.other-server.com/subscription_info.html
>>>>> # N.B.: Many of the environment variables associated with the
>>>>> original
>>>>> # request will *not* be available to such a script.
>>>>>
>>>>> #
>>>>> # Customize behaviour based on the browser
>>>>> #
>>>>> <IfModule mod_setenvif.c>
>>>>>
>>>>> #
>>>>> # The following directives modify normal HTTP response behavior.
>>>>> # The first directive disables keepalive for Netscape 2.x and
>>>>> browsers that
>>>>> # spoof it. There are known problems with these browser
>>>>> implementations.
>>>>> # The second directive is for Microsoft Internet Explorer 4.0b2
>>>>> # which has a broken HTTP/1.1 implementation and does not properly
>>>>> # support keepalive when it is used on 301 or 302 (redirect)
>>>>> responses.
>>>>> #
>>>>> BrowserMatch "Mozilla/2" nokeepalive
>>>>> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
>>>>> force-response-1.0
>>>>>
>>>>> #
>>>>> # The following directive disables HTTP/1.1 responses to
>>>>> browsers which
>>>>> # are in violation of the HTTP/1.0 spec by not being able to
>>>>> grok a
>>>>> # basic 1.1 response.
>>>>> #
>>>>> BrowserMatch "RealPlayer 4\.0" force-response-1.0
>>>>> BrowserMatch "Java/1\.0" force-response-1.0
>>>>> BrowserMatch "JDK/1\.0" force-response-1.0
>>>>>
>>>>> </IfModule>
>>>>> # End of browser customization directives
>>>>>
>>>>> #
>>>>> # Allow server status reports, with the URL of
>>>>> http://servername/server-status
>>>>> # Change the ".your-domain.com" to match your domain to enable.
>>>>> #
>>>>> # Note: apache is started (by /etc/init.d/apache) with -D STATUS
>>>>> if # HTTPD_SEC_ACCESS_SERVERINFO is set to "yes" in #
>>>>> /etc/sysconfig/apache.
>>>>>
>>>>> <IfDefine STATUS>
>>>>> <Location /server-status>
>>>>> SetHandler server-status
>>>>> Order deny,allow
>>>>> Deny from all
>>>>> Allow from localhost
>>>>> </Location>
>>>>>
>>>>> #
>>>>> # Allow remote server configuration reports, with the URL of
>>>>> # http://servername/server-info (requires that mod_info.c be loaded).
>>>>> # Change the ".your-domain.com" to match your domain to enable.
>>>>> #
>>>>> <Location /server-info>
>>>>> SetHandler server-info
>>>>> Order deny,allow
>>>>> Deny from all
>>>>> Allow from localhost
>>>>> </Location>
>>>>>
>>>>> #
>>>>> # enable perl-status for mod_perl
>>>>> #
>>>>> <IfModule mod_perl.c>
>>>>> <Location /perl-status>
>>>>> SetHandler perl-script
>>>>> PerlHandler Apache::Status
>>>>> order deny,allow
>>>>> deny from all
>>>>> allow from localhost
>>>>> </Location>
>>>>> </IfModule>
>>>>> </IfDefine>
>>>>>
>>>>>
>>>>> #
>>>>> # There have been reports of people trying to abuse an old bug
>>>>> from pre-1.1
>>>>> # days. This bug involved a CGI script distributed as a part of
>>>>> Apache.
>>>>> # By uncommenting these lines you can redirect these attacks to a
>>>>> logging # script on phf.apache.org. Or, you can record them
>>>>> yourself, using the script
>>>>> # support/phf_abuse_log.cgi.
>>>>> #
>>>>> #<Location /cgi-bin/phf*>
>>>>> # Deny from all
>>>>> # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
>>>>> #</Location>
>>>>>
>>>>> #
>>>>> # Proxy Server directives. Uncomment the following lines to
>>>>> # enable the proxy server:
>>>>> #
>>>>> #<IfModule mod_proxy.c>
>>>>> # ProxyRequests On
>>>>>
>>>>> # <Directory proxy:*>
>>>>> # Order deny,allow
>>>>> # Deny from all
>>>>> # Allow from .your-domain.com
>>>>> # </Directory>
>>>>>
>>>>> #
>>>>> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
>>>>> # ("Full" adds the server version; "Block" removes all outgoing
>>>>> Via: headers)
>>>>> # Set to one of: Off | On | Full | Block
>>>>> #
>>>>> # ProxyVia On
>>>>>
>>>>> #
>>>>> # To enable the cache as well, edit and uncomment the following
>>>>> lines:
>>>>> # (no cacheing without CacheRoot)
>>>>> #
>>>>> # CacheRoot "/var/cache/http"
>>>>> # CacheSize 5
>>>>> # CacheGcInterval 4
>>>>> # CacheMaxExpire 24
>>>>> # CacheLastModifiedFactor 0.1
>>>>> # CacheDefaultExpire 1
>>>>> # NoCache a-domain.com another-domain.edu joes.garage-sale.com
>>>>>
>>>>> #</IfModule>
>>>>> # End of proxy directives.
>>>>>
>>>>> ### Section 3: Virtual Hosts
>>>>> #
>>>>> # VirtualHost: If you want to maintain multiple domains/hostnames
>>>>> on your
>>>>> # machine you can setup VirtualHost containers for them. Most
>>>>> configurations
>>>>> # use only name-based virtual hosts so the server doesn't need to
>>>>> worry about
>>>>> # IP addresses. This is indicated by the asterisks in the
>>>>> directives below.
>>>>> #
>>>>> # Please see the documentation at
>>>>> <URL:http://www.apache.org/docs/vhosts/>
>>>>> # for further details before you try to setup virtual hosts.
>>>>> #
>>>>> # You may use the command line option '-S' to verify your virtual
>>>>> host
>>>>> # configuration.
>>>>>
>>>>> #
>>>>> # Use name-based virtual hosting.
>>>>> #
>>>>> #NameVirtualHost *
>>>>>
>>>>> #
>>>>> # VirtualHost example:
>>>>> # Almost any Apache directive may go into a VirtualHost container.
>>>>> # The first VirtualHost section is used for requests without a known
>>>>> # server name.
>>>>> #
>>>>> #<VirtualHost *>
>>>>> # ServerAdmin webmaster@dummy-host.example.com
>>>>> # DocumentRoot /www/docs/dummy-host.example.com
>>>>> # ServerName dummy-host.example.com
>>>>> # ErrorLog logs/dummy-host.example.com-error_log
>>>>> # CustomLog logs/dummy-host.example.com-access_log common
>>>>> #</VirtualHost>
>>>>>
>>>>> #<VirtualHost _default_:*>
>>>>> #</VirtualHost>
>>>>>
>>>>> ##
>>>>> ## SSL Global Context
>>>>> ##
>>>>> ## All SSL configuration in this context applies both to
>>>>> ## the main server and all SSL-enabled virtual hosts.
>>>>> ##
>>>>>
>>>>> #
>>>>> # Some MIME-types for downloading Certificates and CRLs
>>>>> #
>>>>> <IfDefine SSL>
>>>>> AddType application/x-x509-ca-cert .crt
>>>>> AddType application/x-pkcs7-crl .crl
>>>>> </IfDefine>
>>>>>
>>>>> <IfModule mod_ssl.c>
>>>>>
>>>>> # Pass Phrase Dialog:
>>>>> # Configure the pass phrase gathering process.
>>>>> # The filtering dialog program (`builtin' is a internal
>>>>> # terminal dialog) has to provide the pass phrase on stdout.
>>>>> SSLPassPhraseDialog builtin
>>>>>
>>>>> # Inter-Process Session Cache:
>>>>> # Configure the SSL Session Cache: First the mechanism # to
>>>>> use and second the expiring timeout (in seconds).
>>>>> #SSLSessionCache none
>>>>> #SSLSessionCache shmht:/var/run/ssl_scache(512000)
>>>>> #SSLSessionCache shmcb:/var/run/ssl_scache(512000)
>>>>> SSLSessionCache dbm:/var/run/ssl_scache
>>>>> SSLSessionCacheTimeout 300
>>>>>
>>>>> # Semaphore:
>>>>> # Configure the path to the mutual exclusion semaphore the
>>>>> # SSL engine uses internally for inter-process synchronization.
>>>>> SSLMutex file:/var/run/ssl_mutex
>>>>>
>>>>> # Pseudo Random Number Generator (PRNG):
>>>>> # Configure one or more sources to seed the PRNG of the # SSL
>>>>> library. The seed data should be of good random quality.
>>>>> # WARNING! On some platforms /dev/random blocks if not enough
>>>>> entropy
>>>>> # is available. This means you then cannot use the /dev/random
>>>>> device
>>>>> # because it would lead to very long connection times (as long as
>>>>> # it requires to make more entropy available). But usually those
>>>>> # platforms additionally provide a /dev/urandom device which
>>>>> doesn't
>>>>> # block. So, if available, use this one instead. Read the
>>>>> mod_ssl User
>>>>> # Manual for more details.
>>>>> SSLRandomSeed startup builtin
>>>>> SSLRandomSeed connect builtin
>>>>> #SSLRandomSeed startup file:/dev/random 512
>>>>> #SSLRandomSeed startup file:/dev/urandom 512
>>>>> #SSLRandomSeed connect file:/dev/random 512
>>>>> #SSLRandomSeed connect file:/dev/urandom 512
>>>>>
>>>>> # Logging:
>>>>> # The home of the dedicated SSL protocol logfile. Errors are
>>>>> # additionally duplicated in the general error log file. Put
>>>>> # this somewhere where it cannot be used for symlink attacks on
>>>>> # a real server (i.e. somewhere where only root can write).
>>>>> # Log levels are (ascending order: higher ones include lower ones):
>>>>> # none, error, warn, info, trace, debug.
>>>>> SSLLog /var/log/httpd/ssl_engine_log
>>>>> SSLLogLevel info
>>>>>
>>>>> </IfModule>
>>>>>
>>>>> <IfDefine SSL>
>>>>>
>>>>> ##
>>>>> ## SSL Virtual Host Context
>>>>> ##
>>>>>
>>>>> <VirtualHost _default_:443>
>>>>>
>>>>> # General setup for the virtual host
>>>>> DocumentRoot "/srv/www/htdocs"
>>>>> ServerName new.host.name
>>>>> ServerAdmin you@your.address
>>>>> ErrorLog /var/log/httpd/error_log
>>>>> TransferLog /var/log/httpd/access_log
>>>>>
>>>>> # SSL Engine Switch:
>>>>> # Enable/Disable SSL for this virtual host.
>>>>> SSLEngine on
>>>>>
>>>>> # SSL Cipher Suite:
>>>>> # List the ciphers that the client is permitted to negotiate.
>>>>> # See the mod_ssl documentation for a complete list.
>>>>> SSLCipherSuite
>>>>> ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
>>>>>
>>>>> # Server Certificate:
>>>>> # Point SSLCertificateFile at a PEM encoded certificate. If
>>>>> # the certificate is encrypted, then you will be prompted for a
>>>>> # pass phrase. Note that a kill -HUP will prompt again. A test
>>>>> # certificate can be generated with `make certificate' under
>>>>> # built time. Keep in mind that if you've both a RSA and a DSA
>>>>> # certificate you can configure both in parallel (to also allow
>>>>> # the use of DSA ciphers, etc.)
>>>>> SSLCertificateFile /etc/httpd/ssl.crt/server.crt
>>>>> #SSLCertificateFile /etc/httpd/ssl.crt/server-dsa.crt
>>>>>
>>>>> # Server Private Key:
>>>>> # If the key is not combined with the certificate, use this
>>>>> # directive to point at the key file. Keep in mind that if
>>>>> # you've both a RSA and a DSA private key you can configure
>>>>> # both in parallel (to also allow the use of DSA ciphers, etc.)
>>>>> SSLCertificateKeyFile /etc/httpd/ssl.key/server.key
>>>>> #SSLCertificateKeyFile /etc/httpd/ssl.key/server-dsa.key
>>>>>
>>>>> # Server Certificate Chain:
>>>>> # Point SSLCertificateChainFile at a file containing the
>>>>> # concatenation of PEM encoded CA certificates which form the
>>>>> # certificate chain for the server certificate. Alternatively
>>>>> # the referenced file can be the same as SSLCertificateFile
>>>>> # when the CA certificates are directly appended to the server
>>>>> # certificate for convinience.
>>>>> #SSLCertificateChainFile /etc/httpd/ssl.crt/ca.crt
>>>>>
>>>>> # Certificate Authority (CA):
>>>>> # Set the CA certificate verification path where to find CA
>>>>> # certificates for client authentication or alternatively one
>>>>> # huge file containing all of them (file must be PEM encoded)
>>>>> # Note: Inside SSLCACertificatePath you need hash symlinks
>>>>> # to point to the certificate files. Use the provided
>>>>> # Makefile to update the hash symlinks after changes.
>>>>> #SSLCACertificatePath /etc/httpd/ssl.crt
>>>>> #SSLCACertificateFile /etc/httpd/ssl.crt/ca-bundle.crt
>>>>>
>>>>> # Certificate Revocation Lists (CRL):
>>>>> # Set the CA revocation path where to find CA CRLs for client
>>>>> # authentication or alternatively one huge file containing all
>>>>> # of them (file must be PEM encoded)
>>>>> # Note: Inside SSLCARevocationPath you need hash symlinks
>>>>> # to point to the certificate files. Use the provided
>>>>> # Makefile to update the hash symlinks after changes.
>>>>> #SSLCARevocationPath /etc/httpd/ssl.crl
>>>>> #SSLCARevocationFile /etc/httpd/ssl.crl/ca-bundle.crl
>>>>>
>>>>> # Client Authentication (Type):
>>>>> # Client certificate verification type and depth. Types are
>>>>> # none, optional, require and optional_no_ca. Depth is a
>>>>> # number which specifies how deeply to verify the certificate
>>>>> # issuer chain before deciding the certificate is not valid.
>>>>> #SSLVerifyClient require
>>>>> #SSLVerifyDepth 10
>>>>>
>>>>> # Access Control:
>>>>> # With SSLRequire you can do per-directory access control based
>>>>> # on arbitrary complex boolean expressions containing server
>>>>> # variable checks and other lookup directives. The syntax is a
>>>>> # mixture between C and Perl. See the mod_ssl documentation
>>>>> # for more details.
>>>>> #<Location />
>>>>> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
>>>>> # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
>>>>> # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
>>>>> # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
>>>>> # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
>>>>> # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
>>>>> #</Location>
>>>>>
>>>>> # SSL Engine Options:
>>>>> # Set various options for the SSL engine.
>>>>> # o FakeBasicAuth:
>>>>> # Translate the client X.509 into a Basic Authorisation. This
>>>>> means that
>>>>> # the standard Auth/DBMAuth methods can be used for access
>>>>> control. The
>>>>> # user name is the `one line' version of the client's X.509
>>>>> certificate.
>>>>> # Note that no password is obtained from the user. Every entry
>>>>> in the user
>>>>> # file needs this password: `xxj31ZMTZzkVA'.
>>>>> # o ExportCertData:
>>>>> # This exports two additional environment variables:
>>>>> SSL_CLIENT_CERT and
>>>>> # SSL_SERVER_CERT. These contain the PEM-encoded certificates
>>>>> of the
>>>>> # server (always existing) and the client (only existing when
>>>>> client
>>>>> # authentication is used). This can be used to import the
>>>>> certificates
>>>>> # into CGI scripts.
>>>>> # o StdEnvVars:
>>>>> # This exports the standard SSL/TLS related `SSL_*'
>>>>> environment variables.
>>>>> # Per default this exportation is switched off for performance
>>>>> reasons,
>>>>> # because the extraction step is an expensive operation and is
>>>>> usually
>>>>> # useless for serving static content. So one usually enables the
>>>>> # exportation for CGI and SSI requests only.
>>>>> # o CompatEnvVars:
>>>>> # This exports obsolete environment variables for backward
>>>>> compatibility
>>>>> # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold
>>>>> 2.x. Use this
>>>>> # to provide compatibility to existing CGI scripts.
>>>>> # o StrictRequire:
>>>>> # This denies access when "SSLRequireSSL" or "SSLRequire"
>>>>> applied even
>>>>> # under a "Satisfy any" situation, i.e. when it applies access
>>>>> is denied
>>>>> # and no other module can change it.
>>>>> # o OptRenegotiate:
>>>>> # This enables optimized SSL connection renegotiation handling
>>>>> when SSL
>>>>> # directives are used in per-directory context. #SSLOptions
>>>>> +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
>>>>> <Files ~ "\.(cgi|shtml|phtml|php3?)$">
>>>>> SSLOptions +StdEnvVars
>>>>> </Files>
>>>>> <Directory "/srv/www/cgi-bin">
>>>>> SSLOptions +StdEnvVars
>>>>> </Directory>
>>>>>
>>>>> # SSL Protocol Adjustments:
>>>>> # The safe and default but still SSL/TLS standard compliant
>>>>> shutdown
>>>>> # approach is that mod_ssl sends the close notify alert but
>>>>> doesn't wait for
>>>>> # the close notify alert from client. When you need a different
>>>>> shutdown
>>>>> # approach you can use one of the following variables:
>>>>> # o ssl-unclean-shutdown:
>>>>> # This forces an unclean shutdown when the connection is
>>>>> closed, i.e. no
>>>>> # SSL close notify alert is send or allowed to received. This
>>>>> violates
>>>>> # the SSL/TLS standard but is needed for some brain-dead
>>>>> browsers. Use
>>>>> # this when you receive I/O errors because of the standard
>>>>> approach where
>>>>> # mod_ssl sends the close notify alert.
>>>>> # o ssl-accurate-shutdown:
>>>>> # This forces an accurate shutdown when the connection is
>>>>> closed, i.e. a
>>>>> # SSL close notify alert is send and mod_ssl waits for the
>>>>> close notify
>>>>> # alert of the client. This is 100% SSL/TLS standard
>>>>> compliant, but in
>>>>> # practice often causes hanging connections with brain-dead
>>>>> browsers. Use
>>>>> # this only for browsers where you know that their SSL
>>>>> implementation
>>>>> # works correctly. # Notice: Most problems of broken clients
>>>>> are also related to the HTTP
>>>>> # keep-alive facility, so you usually additionally want to disable
>>>>> # keep-alive for those clients, too. Use variable "nokeepalive"
>>>>> for this.
>>>>> # Similarly, one has to force some clients to use HTTP/1.0 to
>>>>> workaround
>>>>> # their broken HTTP/1.1 implementation. Use variables
>>>>> "downgrade-1.0" and
>>>>> # "force-response-1.0" for this.
>>>>> SetEnvIf User-Agent ".*MSIE.*" \
>>>>> nokeepalive ssl-unclean-shutdown \
>>>>> downgrade-1.0 force-response-1.0
>>>>>
>>>>> # Per-Server Logging:
>>>>> # The home of a custom SSL log file. Use this when you want a
>>>>> # compact non-error SSL logfile on a virtual host basis.
>>>>> CustomLog /var/log/httpd/ssl_request_log \
>>>>> "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
>>>>>
>>>>> </VirtualHost> </IfDefine>
>>>>>
>>>>>
>>>>>
>>>>> # Note:
>>>>> #
>>>>> # The file that is included below is generated by SuSEconfig.
>>>>> #
>>>>> # In this file, SuSEconfig puts Include statements it finds
>>>>> # in /etc/httpd/modules/* (lines with "File:..." or
>>>>> "Include:..."). # If such a module file also contains a
>>>>> "Variable:..." statement, the settings # in /etc/sysconfig/apache
>>>>> will be honored. # # In addition, any files listed in the
>>>>> HTTPD_CONF_INCLUDE_FILES variable # in /etc/sysconfig/apache will
>>>>> be included here by SuSEconfig. # This allows you to add e.g.
>>>>> VirtualHost statements without touching
>>>>> # /etc/httpd/httpd.conf itself, which means that SuSEconfig will
>>>>> continue doing its
>>>>> # job (since it would not touch httpd.conf any longer as soon it
>>>>> detects changes
>>>>> # made by the admin via the md5sum mechanism)
>>>>>
>>>>> # Include /etc/httpd/suse_include.conf
>>>>>
>>>>> Include
>>>>> /home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>>>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>>>>
>>>>
>>>
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Emerson Cargnin <em...@tre-sc.gov.br>.
you mean putting a listener under each context?
hpw do I name the default host in apache to "localhost", so it could
work. by the way, I didn't change anything of http.conf, so the
procedures should work, shouln't?
may be it could be a problem of "localhost" dns?
Qing Xie wrote:
> My guess was right. You have problems with you virtual host setting
> because when JKMount is global, it works, when it's inside
> <VirtualHost localhost>, it doesn't work.
>
> You can search for my post in the past few days re virtual host. It
> may help you.
>
> Qing
>
>
> Emerson Cargnin wrote:
>
>> hi all.
>>
>> I commented out the include command at httpd.conf and put the
>> following :
>>
>> #Include
>> /home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>
>> <IfModule mod_jk.c>
>> JkWorkersFile
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>>
>> JkLogFile
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>>
>> JkLogLevel debug
>>
>> JkMount /examples ajp13
>> JkMount /examples/* ajp13
>>
>> </IfModule>
>>
>> And it worked.... I don't undertand any more : )
>>
>> because i had this at auto/mod_jk.conf :
>>
>> ...
>> JkMount /examples/jsp/security/protected/j_security_check ajp13
>> JkMount /examples/snoop ajp13
>> JkMount /examples/servlet/* ajp13
>> JkMount /examples/CompressionTest ajp13
>> JkMount /examples/*.jsp ajp13
>> JkMount /examples/servletToJsp ajp13
>> JkMount /examples/SendMailServlet ajp13
>> ...
>>
>> Emerson Cargnin wrote:
>>
>>> forget to say : apache 1.3.(26) and tomcat 4.1.24
>>>
>>> thanks
>>>
>>> Emerson Cargnin wrote:
>>>
>>>> could someone send an working copy of server.xml,workers.properties
>>>> and httpd.conf ?
>>>> I need a conf with auto-conf working....
>>>>
>>>> Hey john, i attached the files you ask......
>>>>
>>>> I don't know why, but after changing debug direct at mod_jk.conf to
>>>> emerg it looks that even when deleting this file, tomcat generates
>>>> the conf file with emerg mode.... how i put this back? I tried to
>>>> put debug="debug" at the "<listener..." under "<Host..." but it
>>>> keeps generating emerg : )
>>>>
>>>> Thanks for your help....
>>>>
>>>>
>>>> John Turner wrote:
>>>>
>>>>>
>>>>> Are you sure you are using Apache 1.3? Apache 1 typically needs
>>>>> both LoadModule and AddModule, you can always put the AddModule
>>>>> directive into an IF statement if needed, there are several
>>>>> examples of this in a default httpd.conf file.
>>>>>
>>>>> My HOWTO doesn't say anything about AddModule because my HOWTO
>>>>> deals with Apache 2, and Apache 2 doesn't use AddModule.
>>>>>
>>>>> Regarding the Apache log error, my guess is your VirtualHosts are
>>>>> not correct, it looks like Apache is looking for numguess.jsp
>>>>> within its default DocumentRoot. In a typical, default Apache +
>>>>> Tomcat installation, it would look for numguess.jsp in
>>>>> /some/path/to/tomcat/webapps/examples/jsp. So, unless you have
>>>>> installed Tomcat in /srv/www/htdocs
>>>>> ($CATALINA_HOME=/srv/www/htdocs), something else isn't right.
>>>>>
>>>>> The "done without a worker" error is pretty self-explanatory.
>>>>>
>>>>> I'd suggest that the next step be that you post your mod_jk.conf
>>>>> file and your workers.properties file, and describe CATALINA_HOME.
>>>>>
>>>>> John
>>>>>
>>>>> On Sat, 10 May 2003 19:34:22 -0300, Emerson Cargnin
>>>>> <em...@tre-sc.gov.br> wrote:
>>>>>
>>>>>> At first thanks for your fast reply : )
>>>>>>
>>>>>> - about adding AddModule mod_jk.c (if you're using JK)
>>>>>> I thing that adding the line "LoadModule jk_module
>>>>>> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you
>>>>>> told, and your tutorial doens't say anything about this line, but
>>>>>> apache just give me the following warn telling that it's already
>>>>>> loaded :
>>>>>>
>>>>>> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already
>>>>>> added, skipping
>>>>>>
>>>>>> - I'm almost there :). following the steps you tell at the
>>>>>> tutorial, it creates the mod_jk.conf ok, but it looks that mod_jk
>>>>>> doesn't find the webapps, although it's configured allright :
>>>>>>
>>>>>>
>>>>>> Apache log :
>>>>>> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does
>>>>>> not exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>>>>>>
>>>>>> mod_jk.log
>>>>>>
>>>>>> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
>>>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
>>>>>> jk_uri_worker_map_t::map_uri_to_worker
>>>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]:
>>>>>> Attempting to map URI '/examples/jsp/num/numguess.jsp'
>>>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
>>>>>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>>>>>
>>>>>>
>>>>>> It looks everything you said before is allright...
>>>>>> any clue?
>>>>>>
>>>>>> John Turner wrote:
>>>>>>
>>>>>>>
>>>>>>>> From comments I've received, this HOWTO is not confusing. It
>>>>>>>> uses Apache
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> 2, but the setup is the same for Apache 1.3. It uses JK. I've
>>>>>>> never worked with SuSE, but I can't imagine it being much
>>>>>>> different than Red Hat.
>>>>>>>
>>>>>>> http://www.johnturner.com/howto/rh72-howto.html
>>>>>>>
>>>>>>> That said, I see some things with your configuration.
>>>>>>>
>>>>>>> - you need this in httpd.conf:
>>>>>>>
>>>>>>> AddModule mod_jk.c (if you're using JK)
>>>>>>>
>>>>>>> - you need a much simpler workers.properties file...dump ALL of
>>>>>>> that JNI stuff. Workers.properties shouldn't be more than this:
>>>>>>>
>>>>>>> # BEGIN workers.properties
>>>>>>> worker.list=ajp13
>>>>>>> worker.ajp13.port=8009
>>>>>>> worker.ajp13.host=localhost (or IP of Tomcat server)
>>>>>>> worker.ajp13.type=ajp13
>>>>>>> # END workers.properties
>>>>>>> - you need an additional Listener element in server.xml for EACH
>>>>>>> Host container...either you are missing it or you didn't post
>>>>>>> it. This is all described in my HOWTO.
>>>>>>>
>>>>>>> Your auto-generated mod_jk.conf file should look VERY similar to
>>>>>>> this:
>>>>>>> http://www.johnturner.com/howto/mod_jk_conf.html
>>>>>>>
>>>>>>> If it doesn't, go back and look at your server.xml and make sure
>>>>>>> your ApacheConfig Listeners are correct.
>>>>>>>
>>>>>>> John
>>>>>>>
>>>>>>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin
>>>>>>> <emerson@tre- sc.gov.br> wrote:
>>>>>>>
>>>>>>>> It has 4 days since i'm trying to get apache 1.3 to talk to
>>>>>>>> tomcat 4.1.24 through jk or jk2.
>>>>>>>> At first some questions that i haven't seem in my long search :
>>>>>>>>
>>>>>>>> - What's is the best and simpler connector? jk, jk2 or
>>>>>>>> mod_webapp ?
>>>>>>>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>>>>>>>> compability with other php apps. I'd like to use the autoconf
>>>>>>>> and remote deploy feature of tomcat 4.1 (that's why i'm
>>>>>>>> upgrading my 3.2.3 production server, which works fine for jk)
>>>>>>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat
>>>>>>>> 4.1.24). I read about jk2 is better for apache 2.0, is it true?
>>>>>>>> - If does, i think i have made some mistake, because it's not
>>>>>>>> working :)
>>>>>>>>
>>>>>>>> My conf :
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------
>>>>>>>> http.conf (lines added):
>>>>>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>>>>>> Include
>>>>>>>> /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------
>>>>>>>> server.xml
>>>>>>>>
>>>>>>>> under "<Server port=..." i put (it's attached for better
>>>>>>>> undertanding) :
>>>>>>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>>>>>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>>>>>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>>>>>>> jdk14/conf/jk/workers.properties"
>>>>>>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------
>>>>>>>> worker.properties configuration file (it's at
>>>>>>>> /opt/local/jakarta-
>>>>>>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>>>>>>
>>>>>>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>>>>>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>>>>>>> ps=/
>>>>>>>>
>>>>>>>> worker.list=ajp13
>>>>>>>> worker.ajp13.port=8009
>>>>>>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>>>>>>> worker.ajp13.type=ajp13
>>>>>>>> worker.ajp13.lbfactor=1
>>>>>>>>
>>>>>>>> worker.loadbalancer.type=lb
>>>>>>>> worker.loadbalancer.balanced_workers=ajp13
>>>>>>>> worker.inprocess.type=jni
>>>>>>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>>>>>>> tomcat.jar
>>>>>>>> worker.inprocess.cmd_line=start
>>>>>>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>>>>>>> classic$(ps)libjvm.so
>>>>>>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>>>>> inprocess.stdout
>>>>>>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>>>>> inprocess.stderr
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------
>>>>>>>>
>>>>>>>> here goes what happens :
>>>>>>>>
>>>>>>>> start tomcat, all ok.
>>>>>>>>
>>>>>>>> start apache, it says ok but in the log appears :
>>>>>>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or
>>>>>>>> directory: Error while opening the workers, jk will not work
>>>>>>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or
>>>>>>>> directory: Error while opening the workers, jk will not work
>>>>>>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>>>>>>> configured -- resuming normal operations
>>>>>>>>
>>>>>>>> is it necessary to do some other specific configuration?
>>>>>>>> I tried jk2 before this, but it didn't work too :(
>>>>>>>> I saw a lot of tutorials about jk and jk2, but all of them are
>>>>>>>> either confuse or don't use autoconf
>>>>>>>>
>>>>>>>> Any clue would help
>>>>>>>>
>>>>>>>> Thanks in advance
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> ########## Auto generated on Tue May 13 15:03:31 BRT 2003##########
>>>>
>>>> <IfModule !mod_jk.c>
>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>> </IfModule>
>>>>
>>>> JkWorkersFile
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>>>>
>>>> JkLogFile
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>>>>
>>>>
>>>> JkLogLevel debug
>>>>
>>>>
>>>>
>>>> <VirtualHost localhost>
>>>> ServerName localhost
>>>>
>>>> #################### localhost:/admin ####################
>>>>
>>>> # Static files Alias /admin
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin"
>>>>
>>>>
>>>> <Directory
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin">
>>>>
>>>> Options Indexes FollowSymLinks
>>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>>
>>>>
>>>> # Deny direct access to WEB-INF and META-INF
>>>> #
>>>> <Location "/admin/WEB-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> <Location "/admin/META-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> JkMount /admin/j_security_check ajp13
>>>> JkMount /admin/*.do ajp13
>>>> JkMount /admin/*.jsp ajp13
>>>>
>>>> #################### localhost:/webdav ####################
>>>>
>>>> # Static files Alias /webdav
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav"
>>>>
>>>>
>>>> <Directory
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav">
>>>>
>>>> Options Indexes FollowSymLinks
>>>> DirectoryIndex index.jsp index.html index.htm </Directory>
>>>>
>>>>
>>>> # Deny direct access to WEB-INF and META-INF
>>>> #
>>>> <Location "/webdav/WEB-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> <Location "/webdav/META-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> JkMount /webdav/*.jsp ajp13
>>>>
>>>> #################### localhost:/examples ####################
>>>>
>>>> # Static files Alias /examples
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples"
>>>>
>>>>
>>>> <Directory
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples">
>>>>
>>>> Options Indexes FollowSymLinks
>>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>>
>>>>
>>>> # Deny direct access to WEB-INF and META-INF
>>>> #
>>>> <Location "/examples/WEB-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> <Location "/examples/META-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> JkMount /examples/jsp/security/protected/j_security_check ajp13
>>>> JkMount /examples/snoop ajp13
>>>> JkMount /examples/servlet/* ajp13
>>>> JkMount /examples/CompressionTest ajp13
>>>> JkMount /examples/*.jsp ajp13
>>>> JkMount /examples/servletToJsp ajp13
>>>> JkMount /examples/SendMailServlet ajp13
>>>>
>>>> #################### localhost:/tomcat-docs ####################
>>>>
>>>> # Static files Alias /tomcat-docs
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs"
>>>>
>>>>
>>>> <Directory
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs">
>>>>
>>>> Options Indexes FollowSymLinks
>>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>>
>>>>
>>>> # Deny direct access to WEB-INF and META-INF
>>>> #
>>>> <Location "/tomcat-docs/WEB-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> <Location "/tomcat-docs/META-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> JkMount /tomcat-docs/*.jsp ajp13
>>>>
>>>> #################### localhost:/manager ####################
>>>>
>>>> # Static files Alias /manager
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager"
>>>>
>>>>
>>>> <Directory
>>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager">
>>>>
>>>> Options Indexes FollowSymLinks
>>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>>
>>>>
>>>> # Deny direct access to WEB-INF and META-INF
>>>> #
>>>> <Location "/manager/WEB-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> <Location "/manager/META-INF/*">
>>>> AllowOverride None
>>>> deny from all
>>>> </Location>
>>>>
>>>> JkMount /manager/list ajp13
>>>> JkMount /manager/serverinfo ajp13
>>>> JkMount /manager/deploy ajp13
>>>> JkMount /manager/sessions ajp13
>>>> JkMount /manager/reload ajp13
>>>> JkMount /manager/html/* ajp13
>>>> JkMount /manager/resources ajp13
>>>> JkMount /manager/start ajp13
>>>> JkMount /manager/stop ajp13
>>>> JkMount /manager/install ajp13
>>>> JkMount /manager/*.jsp ajp13
>>>> JkMount /manager/roles ajp13
>>>> JkMount /manager/remove ajp13
>>>> JkMount /manager/undeploy ajp13
>>>> </VirtualHost>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> worker.list=ajp13
>>>> worker.ajp13.port=8009
>>>> worker.ajp13.host=localhost
>>>> worker.ajp13.type=ajp13
>>>> worker.ajp13.lbfactor=1
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (172)]: Into
>>>> jk_uri_worker_map_t::uri_worker_map_alloc
>>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (375)]: Into
>>>> jk_uri_worker_map_t::uri_worker_map_open
>>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (396)]:
>>>> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (422)]:
>>>> jk_uri_worker_map_t::uri_worker_map_open, done
>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (88)]: Into wc_open
>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (222)]: Into
>>>> build_worker_map, creating 1 workers
>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (228)]: build_worker_map,
>>>> creating worker ajp13
>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (148)]: Into wc_create_worker
>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (162)]: wc_create_worker,
>>>> about to create instance ajp13 of ajp13
>>>> [Tue May 13 15:04:37 2003] [jk_ajp13_worker.c (108)]: Into
>>>> ajp13_worker_factory
>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (171)]: wc_create_worker,
>>>> about to validate and init ajp13
>>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1219)]: Into
>>>> jk_worker_t::validate
>>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1239)]: In
>>>> jk_worker_t::validate for worker ajp13 contact is localhost:8009
>>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1267)]: Into
>>>> jk_worker_t::init
>>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1287)]: In
>>>> jk_worker_t::init, setting socket timeout to 0
>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (187)]: wc_create_worker,
>>>> done
>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (238)]: build_worker_map,
>>>> removing old ajp13 worker [Tue May 13 15:04:37 2003] [jk_worker.c
>>>> (250)]: build_worker_map, done
>>>> [Tue May 13 15:04:37 2003] [jk_worker.c (111)]: wc_open, done 1
>>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (172)]: Into
>>>> jk_uri_worker_map_t::uri_worker_map_alloc
>>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (375)]: Into
>>>> jk_uri_worker_map_t::uri_worker_map_open
>>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (396)]:
>>>> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (422)]:
>>>> jk_uri_worker_map_t::uri_worker_map_open, done
>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (88)]: Into wc_open
>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (222)]: Into
>>>> build_worker_map, creating 1 workers
>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (228)]: build_worker_map,
>>>> creating worker ajp13
>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (148)]: Into wc_create_worker
>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (162)]: wc_create_worker,
>>>> about to create instance ajp13 of ajp13
>>>> [Tue May 13 15:04:38 2003] [jk_ajp13_worker.c (108)]: Into
>>>> ajp13_worker_factory
>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (171)]: wc_create_worker,
>>>> about to validate and init ajp13
>>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1219)]: Into
>>>> jk_worker_t::validate
>>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1239)]: In
>>>> jk_worker_t::validate for worker ajp13 contact is localhost:8009
>>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1267)]: Into
>>>> jk_worker_t::init
>>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1287)]: In
>>>> jk_worker_t::init, setting socket timeout to 0
>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (187)]: wc_create_worker,
>>>> done
>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (238)]: build_worker_map,
>>>> removing old ajp13 worker [Tue May 13 15:04:38 2003] [jk_worker.c
>>>> (250)]: build_worker_map, done
>>>> [Tue May 13 15:04:38 2003] [jk_worker.c (111)]: wc_open, done 1
>>>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (460)]: Into
>>>> jk_uri_worker_map_t::map_uri_to_worker
>>>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (477)]: Attempting
>>>> to map URI '/examples/servlet/HelloWorldExample'
>>>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (599)]:
>>>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> ##
>>>> ## httpd.conf -- Apache HTTP server configuration file
>>>> ##
>>>>
>>>> #
>>>> # Based upon the NCSA server configuration files originally by Rob
>>>> McCool.
>>>> #
>>>> # This is the main Apache server configuration file. It contains the
>>>> # configuration directives that give the server its instructions.
>>>> # See <URL:http://www.apache.org/docs/> for detailed information about
>>>> # the directives.
>>>> #
>>>> # Do NOT simply read the instructions in here without understanding
>>>> # what they do. They're here only as hints or reminders. If you
>>>> are unsure
>>>> # consult the online docs. You have been warned. #
>>>> # After this file is processed, the server will look for and process
>>>> # /srv/www/conf/srm.conf and then /srv/www/conf/access.conf
>>>> # unless you have overridden these with ResourceConfig and/or
>>>> # AccessConfig directives here.
>>>> #
>>>> # The configuration directives are grouped into three basic sections:
>>>> # 1. Directives that control the operation of the Apache server
>>>> process as a
>>>> # whole (the 'global environment').
>>>> # 2. Directives that define the parameters of the 'main' or
>>>> 'default' server,
>>>> # which responds to requests that aren't handled by a virtual
>>>> host.
>>>> # These directives also provide default values for the settings
>>>> # of all virtual hosts.
>>>> # 3. Settings for virtual hosts, which allow Web requests to be
>>>> sent to
>>>> # different IP addresses or hostnames and have them handled by the
>>>> # same Apache server process.
>>>> #
>>>> # Configuration and logfile names: If the filenames you specify for
>>>> many
>>>> # of the server's control files begin with "/" (or "drive:/" for
>>>> Win32), the
>>>> # server will use that explicit path. If the filenames do *not* begin
>>>> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
>>>> # with ServerRoot set to "/usr/local/apache" will be interpreted by
>>>> the
>>>> # server as "/usr/local/apache/logs/foo.log".
>>>> #
>>>>
>>>> ### Section 1: Global Environment
>>>> #
>>>> # The directives in this section affect the overall operation of
>>>> Apache,
>>>> # such as the number of concurrent requests it can handle or where it
>>>> # can find its configuration files.
>>>> #
>>>>
>>>> #
>>>> # ServerType is either inetd, or standalone. Inetd mode is only
>>>> supported on
>>>> # Unix platforms.
>>>> #
>>>> ServerType standalone
>>>>
>>>> #
>>>> # ServerRoot: The top of the directory tree under which the server's
>>>> # configuration, error, and log files are kept.
>>>> #
>>>> # NOTE! If you intend to place this on an NFS (or otherwise network)
>>>> # mounted filesystem then please read the LockFile documentation
>>>> # (available at
>>>> <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
>>>> # you will save yourself a lot of trouble.
>>>> #
>>>> ServerRoot "/srv/www"
>>>>
>>>> #
>>>> # The LockFile directive sets the path to the lockfile used when
>>>> Apache
>>>> # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
>>>> # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be
>>>> left at
>>>> # its default value. The main reason for changing it is if the logs
>>>> # directory is NFS mounted, since the lockfile MUST BE STORED ON A
>>>> LOCAL
>>>> # DISK. The PID of the main server process is automatically
>>>> appended to
>>>> # the filename. #
>>>> LockFile /var/lock/subsys/httpd/httpd.accept.lock
>>>>
>>>> #
>>>> # PidFile: The file in which the server should record its process
>>>> # identification number when it starts.
>>>> #
>>>> PidFile /var/run/httpd.pid
>>>>
>>>> #
>>>> # ScoreBoardFile: File used to store internal server process
>>>> information.
>>>> # Not all architectures require this. But if yours does (you'll
>>>> know because
>>>> # this file will be created when you run Apache) then you *must*
>>>> ensure that
>>>> # no two invocations of Apache share the same scoreboard file.
>>>> #
>>>> ScoreBoardFile /var/run/httpd.scoreboard
>>>>
>>>> #
>>>> # In the standard configuration, the server will process httpd.conf
>>>> (this # file, specified by the -f command line option), srm.conf,
>>>> and access.conf # in that order. The latter two files are now
>>>> distributed empty, as it is # recommended that all directives be
>>>> kept in a single file for simplicity. # The commented-out values
>>>> below are the built-in defaults. You can have the # server ignore
>>>> these files altogether by using "/dev/null" (for Unix) or
>>>> # "nul" (for Win32) for the arguments to the directives.
>>>> #
>>>> #ResourceConfig conf/srm.conf
>>>> #AccessConfig conf/access.conf
>>>>
>>>> #
>>>> # Timeout: The number of seconds before receives and sends time out.
>>>> #
>>>> Timeout 300
>>>>
>>>> #
>>>> # KeepAlive: Whether or not to allow persistent connections (more than
>>>> # one request per connection). Set to "Off" to deactivate.
>>>> #
>>>> KeepAlive On
>>>>
>>>> #
>>>> # MaxKeepAliveRequests: The maximum number of requests to allow
>>>> # during a persistent connection. Set to 0 to allow an unlimited
>>>> amount.
>>>> # We recommend you leave this number high, for maximum performance.
>>>> #
>>>> MaxKeepAliveRequests 100
>>>>
>>>> #
>>>> # KeepAliveTimeout: Number of seconds to wait for the next request
>>>> from the
>>>> # same client on the same connection.
>>>> #
>>>> KeepAliveTimeout 15
>>>>
>>>> #
>>>> # Server-pool size regulation. Rather than making you guess how many
>>>> # server processes you need, Apache dynamically adapts to the load it
>>>> # sees --- that is, it tries to maintain enough server processes to
>>>> # handle the current load, plus a few spare servers to handle
>>>> transient
>>>> # load spikes (e.g., multiple simultaneous requests from a single
>>>> # Netscape browser).
>>>> #
>>>> # It does this by periodically checking how many servers are waiting
>>>> # for a request. If there are fewer than MinSpareServers, it creates
>>>> # a new spare. If there are more than MaxSpareServers, some of the
>>>> # spares die off. The default values are probably OK for most sites.
>>>> #
>>>>
>>>> # Note: these two values are set by SuSEconfig according to the
>>>> setting of the
>>>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache!
>>>> MinSpareServers 1
>>>> MaxSpareServers 1
>>>>
>>>> #
>>>> # Number of servers to start initially --- should be a reasonable
>>>> ballpark
>>>> # figure.
>>>> #
>>>>
>>>> # Note: this value is set by SuSEconfig according to the setting of
>>>> the
>>>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! StartServers 1
>>>>
>>>> #
>>>> # Limit on total number of servers running, i.e., limit on the number
>>>> # of clients who can simultaneously connect --- if this limit is ever
>>>> # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO
>>>> LOW.
>>>> # It is intended mainly as a brake to keep a runaway server from
>>>> taking
>>>> # the system with it as it spirals down...
>>>> #
>>>>
>>>> # Note: this value is set by SuSEconfig according to the setting of
>>>> the
>>>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! MaxClients 150
>>>>
>>>> #
>>>> # MaxRequestsPerChild: the number of requests each child process is
>>>> # allowed to process before the child dies. The child will exit so
>>>> # as to avoid problems after prolonged use when Apache (and maybe the
>>>> # libraries it uses) leak memory or other resources. On most
>>>> systems, this
>>>> # isn't really needed, but a few (such as Solaris) do have notable
>>>> leaks
>>>> # in the libraries. For these platforms, set to something like 10000
>>>> # or so; a setting of 0 means unlimited.
>>>> #
>>>> # NOTE: This value does not include keepalive requests after the
>>>> initial
>>>> # request per connection. For example, if a child process
>>>> handles
>>>> # an initial request and 10 subsequent "keptalive" requests, it
>>>> # would only count as 1 request towards this limit.
>>>> #
>>>> MaxRequestsPerChild 0
>>>>
>>>> #
>>>> # Listen: Allows you to bind Apache to specific IP addresses and/or
>>>> # ports, in addition to the default. See also the <VirtualHost>
>>>> # directive.
>>>> #
>>>> #Listen 3000
>>>> #Listen 12.34.56.78:80
>>>>
>>>> #
>>>> # BindAddress: You can support virtual hosts with this option. This
>>>> directive
>>>> # is used to tell the server which IP address to listen to. It can
>>>> either
>>>> # contain "*", an IP address, or a fully qualified Internet domain
>>>> name.
>>>> # See also the <VirtualHost> and Listen directives.
>>>> #
>>>> #BindAddress *
>>>>
>>>> #
>>>> # Dynamic Shared Object (DSO) Support
>>>> #
>>>> # To be able to use the functionality of a module which was built
>>>> as a DSO you
>>>> # have to place corresponding `LoadModule' lines at this location
>>>> so the
>>>> # directives contained in it are actually available _before_ they
>>>> are used.
>>>> # Please read the file http://httpd.apache.org/docs/dso.html for more
>>>> # details about the DSO mechanism and run `httpd -l' for the list
>>>> of already
>>>> # built-in (statically linked and thus always available) modules in
>>>> your httpd
>>>> # binary.
>>>> #
>>>> # Note: The order in which modules are loaded is important. Don't
>>>> change
>>>> # the order below without expert advice.
>>>>
>>>> # Note:
>>>> #
>>>> # The file that is included after the LoadModule statements is
>>>> generated # by SuSEconfig according to #
>>>> # 1) which modules (ones not included with apache) are installed
>>>> # 2) the settings in /etc/sysconfig/apache
>>>> # # SuSEconfig uses the /etc/httpd/modules/* files that come with
>>>> each module # to determine the necessary directives. # # Apache no
>>>> longer needs to be started with '-D <modules>' switches (with # the
>>>> exception of mod_ssl, which has a lot of conditional statements).
>>>>
>>>> # Example:
>>>> # LoadModule foo_module libexec/mod_foo.so
>>>> LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
>>>> LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
>>>> LoadModule env_module /usr/lib/apache/mod_env.so
>>>> LoadModule define_module /usr/lib/apache/mod_define.so
>>>> LoadModule config_log_module /usr/lib/apache/mod_log_config.so
>>>> LoadModule agent_log_module /usr/lib/apache/mod_log_agent.so
>>>> LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
>>>> LoadModule mime_magic_module /usr/lib/apache/mod_mime_magic.so
>>>> LoadModule mime_module /usr/lib/apache/mod_mime.so
>>>> LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
>>>> LoadModule status_module /usr/lib/apache/mod_status.so
>>>> LoadModule info_module /usr/lib/apache/mod_info.so
>>>> LoadModule includes_module /usr/lib/apache/mod_include.so
>>>> LoadModule autoindex_module /usr/lib/apache/mod_autoindex.so
>>>> LoadModule dir_module /usr/lib/apache/mod_dir.so
>>>> LoadModule cgi_module /usr/lib/apache/mod_cgi.so
>>>> LoadModule asis_module /usr/lib/apache/mod_asis.so
>>>> LoadModule imap_module /usr/lib/apache/mod_imap.so
>>>> LoadModule action_module /usr/lib/apache/mod_actions.so
>>>> LoadModule speling_module /usr/lib/apache/mod_speling.so
>>>> # mod_userdir will be included below by SuSEconfig if
>>>> HTTPD_SEC_PUBLIC_HTML=yes
>>>> LoadModule alias_module /usr/lib/apache/mod_alias.so
>>>> LoadModule rewrite_module /usr/lib/apache/mod_rewrite.so
>>>> LoadModule access_module /usr/lib/apache/mod_access.so
>>>> LoadModule auth_module /usr/lib/apache/mod_auth.so
>>>> LoadModule anon_auth_module /usr/lib/apache/mod_auth_anon.so
>>>> LoadModule dbm_auth_module /usr/lib/apache/mod_auth_dbm.so
>>>> LoadModule db_auth_module /usr/lib/apache/mod_auth_db.so
>>>> LoadModule digest_module /usr/lib/apache/mod_digest.so
>>>> LoadModule proxy_module /usr/lib/apache/libproxy.so
>>>> LoadModule cern_meta_module /usr/lib/apache/mod_cern_meta.so
>>>> LoadModule expires_module /usr/lib/apache/mod_expires.so
>>>> LoadModule headers_module /usr/lib/apache/mod_headers.so
>>>> LoadModule usertrack_module /usr/lib/apache/mod_usertrack.so
>>>> LoadModule unique_id_module /usr/lib/apache/mod_unique_id.so
>>>> LoadModule setenvif_module /usr/lib/apache/mod_setenvif.so
>>>> <IfDefine DUMMYSSL>
>>>> LoadModule ssl_module /usr/lib/apache/libssl.so
>>>> </IfDefine>
>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>>
>>>>
>>>>
>>>> Include /etc/httpd/suse_loadmodule.conf
>>>>
>>>>
>>>> # Reconstruction of the complete module list from all available
>>>> modules
>>>> # (static and shared ones) to achieve correct module execution order.
>>>> # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
>>>> ClearModuleList
>>>> AddModule mod_mmap_static.c
>>>> AddModule mod_vhost_alias.c
>>>> AddModule mod_env.c
>>>> AddModule mod_define.c
>>>> AddModule mod_log_config.c
>>>> AddModule mod_log_agent.c
>>>> AddModule mod_log_referer.c
>>>> AddModule mod_mime_magic.c
>>>> AddModule mod_mime.c
>>>> AddModule mod_negotiation.c
>>>> AddModule mod_status.c
>>>> AddModule mod_info.c
>>>> AddModule mod_include.c
>>>> AddModule mod_autoindex.c
>>>> AddModule mod_dir.c
>>>> AddModule mod_cgi.c
>>>> AddModule mod_asis.c
>>>> AddModule mod_imap.c
>>>> AddModule mod_actions.c
>>>> AddModule mod_speling.c
>>>> # mod_userdir will be included below by SuSEconfig if
>>>> HTTPD_SEC_PUBLIC_HTML=yes
>>>> AddModule mod_alias.c
>>>> AddModule mod_rewrite.c
>>>> AddModule mod_access.c
>>>> AddModule mod_auth.c
>>>> AddModule mod_auth_anon.c
>>>> AddModule mod_auth_dbm.c
>>>> AddModule mod_auth_db.c
>>>> AddModule mod_digest.c
>>>> AddModule mod_proxy.c
>>>> AddModule mod_cern_meta.c
>>>> AddModule mod_expires.c
>>>> AddModule mod_headers.c
>>>> AddModule mod_usertrack.c
>>>> AddModule mod_unique_id.c
>>>> AddModule mod_so.c
>>>> AddModule mod_setenvif.c
>>>> <IfDefine DUMMYSSL>
>>>> AddModule mod_ssl.c
>>>> </IfDefine>
>>>>
>>>> AddModule mod_jk.c
>>>>
>>>>
>>>>
>>>> # Again, the following file is generated by SuSEconfig for modules
>>>> that actually
>>>> # have been installed
>>>>
>>>> Include /etc/httpd/suse_addmodule.conf
>>>>
>>>>
>>>> #
>>>> # ExtendedStatus controls whether Apache will generate "full" status
>>>> # information (ExtendedStatus On) or just basic information
>>>> (ExtendedStatus
>>>> # Off) when the "server-status" handler is called. The default is Off.
>>>> #
>>>> ExtendedStatus On
>>>>
>>>>
>>>> #
>>>> # To enable mod_dav, add the following directive to the appropriate
>>>> # container(s) in the httpd.conf file:
>>>> #
>>>> <IfModule mod_dav.c>
>>>> DavLockDB /var/lock/DAVLock
>>>> </IfModule>
>>>>
>>>>
>>>> #
>>>> #
>>>> # enable the SSI (Server Side Includes) execution for +x files
>>>> #
>>>> <IfModule mod_include.c>
>>>> XBitHack on
>>>> </IfModule>
>>>>
>>>>
>>>> ### Section 2: 'Main' server configuration
>>>> #
>>>> # The directives in this section set up the values used by the 'main'
>>>> # server, which responds to any requests that aren't handled by a
>>>> # <VirtualHost> definition. These values also provide defaults for
>>>> # any <VirtualHost> containers you may define later in the file.
>>>> #
>>>> # All of these directives may appear inside <VirtualHost> containers,
>>>> # in which case these default settings will be overridden for the
>>>> # virtual host being defined.
>>>> #
>>>>
>>>> #
>>>> # If your ServerType directive (set earlier in the 'Global
>>>> Environment'
>>>> # section) is set to "inetd", the next few directives don't have any
>>>> # effect since their settings are defined by the inetd configuration.
>>>> # Skip ahead to the ServerAdmin directive.
>>>> #
>>>>
>>>> #
>>>> # Port: The port to which the standalone server listens. For
>>>> # ports < 1023, you will need httpd to be run as root initially.
>>>> #
>>>> Port 80
>>>>
>>>> ##
>>>> ## SSL Support
>>>> ##
>>>> ## When we also provide SSL we have to listen to the ## standard
>>>> HTTP port (see above) and to the HTTPS port
>>>> ##
>>>> <IfDefine SSL>
>>>> Listen 80
>>>> Listen 443
>>>> </IfDefine>
>>>>
>>>> #
>>>> # If you wish httpd to run as a different user or group, you must run
>>>> # httpd as root initially and it will switch. #
>>>> # User/Group: The name (or #number) of the user/group to run httpd as.
>>>> # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
>>>> # . On HPUX you may not be able to use shared memory as nobody,
>>>> and the
>>>> # suggested workaround is to create a user www and use that user.
>>>> # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
>>>> # when the value of (unsigned)Group is above 60000; # don't use
>>>> Group nogroup on these systems!
>>>> #
>>>> User wwwrun
>>>> Group nogroup
>>>>
>>>> #
>>>> # ServerAdmin: Your address, where problems with the server should be
>>>> # e-mailed. This address appears on some server-generated pages, such
>>>> # as error documents.
>>>> #
>>>>
>>>> # Note: this email address is set by SuSEconfig according to the
>>>> setting of the
>>>> # HTTPD_SEC_SERVERADMIN variable in /etc/sysconfig/apache!
>>>> ServerAdmin webmaster@elbassan.tre-sc.gov.br
>>>>
>>>> #
>>>> # ServerName allows you to set a host name which is sent back to
>>>> clients for
>>>> # your server if it's different than the one the program would get
>>>> (i.e., use
>>>> # "www" instead of the host's real name).
>>>> #
>>>> # Note: You cannot just invent host names and hope they work. The
>>>> name you # define here must be a valid DNS name for your host. If
>>>> you don't understand
>>>> # this, ask your network administrator.
>>>> # If your host doesn't have a registered DNS name, enter its IP
>>>> address here.
>>>> # You will have to access it by its address (e.g.,
>>>> http://123.45.67.89/)
>>>> # anyway, and this will make redirections work in a sensible way.
>>>> #
>>>> # 127.0.0.1 is the TCP/IP local loop-back address, often named
>>>> localhost. Your # machine always knows itself by this address. If
>>>> you use Apache strictly for # local testing and development, you
>>>> may use 127.0.0.1 as the server name.
>>>> #
>>>>
>>>> # Note: the host name is set by SuSEconfig according to the setting
>>>> of the
>>>> # FQHOSTNAME variable in /etc/sysconfig/network/config!
>>>> ServerName elbassan.tre-sc.gov.br
>>>>
>>>> #
>>>> # DocumentRoot: The directory out of which you will serve your
>>>> # documents. By default, all requests are taken from this
>>>> directory, but
>>>> # symbolic links and aliases may be used to point to other locations.
>>>> #
>>>> DocumentRoot "/srv/www/htdocs"
>>>>
>>>> #
>>>> # Each directory to which Apache has access, can be configured with
>>>> respect
>>>> # to which services and features are allowed and/or disabled in that
>>>> # directory (and its subdirectories). #
>>>> # First, we configure the "default" to be a very restrictive set of
>>>> # permissions. #
>>>> <Directory />
>>>> AuthUserFile /etc/httpd/passwd
>>>> AuthGroupFile /etc/httpd/group
>>>>
>>>> Options -FollowSymLinks +Multiviews
>>>> AllowOverride None
>>>>
>>>> </Directory>
>>>>
>>>>
>>>> #
>>>> # Note that from this point forward you must specifically allow
>>>> # particular features to be enabled - so if something's not working as
>>>> # you might expect, make sure that you have specifically enabled it
>>>> # below.
>>>> #
>>>>
>>>> #
>>>> # This should be changed to whatever you set DocumentRoot to.
>>>> #
>>>> <Directory "/srv/www/htdocs">
>>>>
>>>> #
>>>> # This may also be "None", "All", or any combination of "Indexes",
>>>> # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
>>>> #
>>>> # Note that "MultiViews" must be named *explicitly* --- "Options All"
>>>> # doesn't give it to you.
>>>> #
>>>> Options Indexes -FollowSymLinks +Includes MultiViews
>>>>
>>>> #
>>>> # This controls which options the .htaccess files in directories can
>>>> # override. Can also be "All", or any combination of "Options",
>>>> "FileInfo", # "AuthConfig", and "Limit"
>>>> #
>>>> AllowOverride None
>>>>
>>>> #
>>>> # Controls who can get stuff from this server.
>>>> #
>>>> Order allow,deny
>>>> Allow from all
>>>>
>>>>
>>>> #
>>>> # disable WebDAV by default for security reasons. #
>>>> <IfModule mod_dav.c>
>>>> DAV Off
>>>> </IfModule>
>>>>
>>>> #
>>>> # Enable SSI (Server Side Includes) for the demo index.html pages,
>>>> as some of the content
>>>> # is created dynamically. This should be disabled when setting up a
>>>> productive
>>>> # server.
>>>> <Files /srv/www/htdocs/index.htm*>
>>>> Options -FollowSymLinks +Includes +MultiViews
>>>> </Files>
>>>>
>>>> #
>>>> # Protect the php3 test page, so it cannot be viewed from an
>>>> outside system. #
>>>> <Files test.php3>
>>>> Order deny,allow
>>>> deny from all
>>>> allow from localhost
>>>> </Files>
>>>>
>>>> </Directory>
>>>>
>>>> #
>>>> # UserDir: The name of the directory which is appended onto a
>>>> user's home
>>>> # directory if a ~user request is received.
>>>>
>>>> # Note: # The next three lines are commented out here. These
>>>> directives and the access # control section have been put into
>>>> /etc/httpd/suse_public_html.conf. # If the variable
>>>> HTTPD_SEC_PUBLIC_HTML in /etc/sysconfig/apache # is set to "yes"
>>>> (default), SuSEconfig will include that file via #
>>>> /etc/httpd/suse_include.conf. # Also note that for the
>>>> /home/*/public_html directories to be browsable the # executable
>>>> flag must be set on the /home/* directories.
>>>> #
>>>> # <IfModule mod_userdir.c>
>>>> # UserDir public_html
>>>> # </IfModule>
>>>>
>>>> #
>>>> # Control access to UserDir directories. The following is an example
>>>> # for a site where these directories are restricted to read-only.
>>>> #
>>>> #<Directory /home/*/public_html>
>>>> # AllowOverride FileInfo AuthConfig Limit
>>>> # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
>>>> # <Limit GET POST OPTIONS PROPFIND>
>>>> # Order allow,deny
>>>> # Allow from all
>>>> # </Limit>
>>>> # <LimitExcept GET POST OPTIONS PROPFIND>
>>>> # Order deny,allow
>>>> # Deny from all
>>>> # </LimitExcept>
>>>> #</Directory>
>>>>
>>>> #
>>>> # DirectoryIndex: Name of the file or files to use as a pre-written
>>>> HTML
>>>> # directory index. Separate multiple entries with spaces.
>>>> #
>>>> <IfModule mod_dir.c>
>>>> DirectoryIndex index.html
>>>> </IfModule>
>>>>
>>>> #
>>>> # AccessFileName: The name of the file to look for in each directory
>>>> # for access control information.
>>>> #
>>>> AccessFileName .htaccess
>>>>
>>>> #
>>>> # The following lines prevent .htaccess files from being viewed by
>>>> # Web clients. Since .htaccess files often contain authorization
>>>> # information, access is disallowed for security reasons. Comment
>>>> # these lines out if you want Web visitors to see the contents of
>>>> # .htaccess files. If you change the AccessFileName directive above,
>>>> # be sure to make the corresponding changes here.
>>>> #
>>>> # Also, folks tend to use names such as .htpasswd for password
>>>> # files, so this will protect those as well.
>>>> #
>>>> <Files ~ "^\.ht">
>>>> Order allow,deny
>>>> Deny from all
>>>> Satisfy All
>>>> </Files>
>>>>
>>>> #
>>>> # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
>>>> with each
>>>> # document that was negotiated on the basis of content. This asks
>>>> proxy
>>>> # servers not to cache the document. Uncommenting the following
>>>> line disables
>>>> # this behavior, and proxies will be allowed to cache the documents.
>>>> #
>>>> #CacheNegotiatedDocs
>>>>
>>>> #
>>>> # UseCanonicalName: (new for 1.3) With this setting turned on,
>>>> whenever
>>>> # Apache needs to construct a self-referencing URL (a URL that
>>>> refers back
>>>> # to the server the response is coming from) it will use ServerName
>>>> and
>>>> # Port to form a "canonical" name. With this setting off, Apache will
>>>> # use the hostname:port that the client supplied, when possible. This
>>>> # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
>>>> #
>>>> UseCanonicalName On
>>>>
>>>> #
>>>> # TypesConfig describes where the mime.types file (or equivalent) is
>>>> # to be found.
>>>> #
>>>> <IfModule mod_mime.c>
>>>> TypesConfig /etc/httpd/mime.types
>>>> </IfModule>
>>>>
>>>> #
>>>> # DefaultType is the default MIME type the server will use for a
>>>> document
>>>> # if it cannot otherwise determine one, such as from filename
>>>> extensions.
>>>> # If your server contains mostly text or HTML documents,
>>>> "text/plain" is
>>>> # a good value. If most of your content is binary, such as
>>>> applications
>>>> # or images, you may want to use "application/octet-stream" instead to
>>>> # keep browsers from trying to display binary files as though they are
>>>> # text.
>>>> #
>>>> DefaultType text/plain
>>>>
>>>> #
>>>> # The mod_mime_magic module allows the server to use various hints
>>>> from the
>>>> # contents of the file itself to determine its type. The
>>>> MIMEMagicFile
>>>> # directive tells the module where the hint definitions are located.
>>>> # mod_mime_magic is not part of the default server (you have to add
>>>> # it yourself with a LoadModule [see the DSO paragraph in the 'Global
>>>> # Environment' section], or recompile the server and include
>>>> mod_mime_magic
>>>> # as part of the configuration), so it's enclosed in an <IfModule>
>>>> container.
>>>> # This means that the MIMEMagicFile directive will only be
>>>> processed if the
>>>> # module is part of the server.
>>>> #
>>>> <IfModule mod_mime_magic.c>
>>>> MIMEMagicFile /etc/httpd/magic
>>>> </IfModule>
>>>>
>>>> #
>>>> # HostnameLookups: Log the names of clients or just their IP addresses
>>>> # e.g., www.apache.org (on) or 204.62.129.132 (off).
>>>> # The default is off because it'd be overall better for the net if
>>>> people
>>>> # had to knowingly turn this feature on, since enabling it means that
>>>> # each client request will result in AT LEAST one lookup request to
>>>> the
>>>> # nameserver.
>>>> #
>>>> HostnameLookups Off
>>>>
>>>>
>>>> # The following are the directives necessary to get mod_backhand
>>>> operational.
>>>> # You will need to add Backhand directives to any directories that
>>>> you wish
>>>> # to balance.. For example, you could put the following inside a
>>>> # ScriptAliased /cgi-cpu/ directory (for scripts that are cpu hogs)
>>>>
>>>> # <Directory ...>
>>>> # ... stuff ...
>>>> # Backhand byAge
>>>> # Backhand byRandom
>>>> # Backhand byLogWindow
>>>> # Backhand byCPU
>>>> # ... stuff ...
>>>> # </Directory>
>>>>
>>>> # This will eliminate servers you haven't heard from for a while
>>>> # Then randomize those remaining
>>>> # Then take the first log(n) (log base 2 of course)
>>>> # Then use the one with the highest CPU idle time
>>>>
>>>> <IfModule mod_backhand.c>
>>>> # UnixSocketDir is were the mod_backhand-Arriba file is stored
>>>> # (how fast your machine is). This directory must be readable and
>>>> writable
>>>> # by euid of apache (wwwrun) because the children have dropped
>>>> privileges
>>>> # before they connect to a UNIX domain socket in this directory.
>>>> # This directive is singular.
>>>> #
>>>> # MulticastStats of the form [<IP ADDR>] <BROADCAST ADDR>:<PORT>
>>>> will set
>>>> # mod_backhand to broadcast server statistics on that address
>>>> advertising
>>>> # for a server on <IP ADDR> or gethostbyname(gethostname())
>>>> # MulticastStats of the form [<IP ADDR>] <MULTICAST
>>>> ADDR>:<PORT>,<ttl> will
>>>> # set mod_backhand to multicast server statistics on that address
>>>> # advertising for a server on <IP ADDR> or
>>>> gethostbyname(gethostname())
>>>> # This directive is singular.
>>>> #
>>>> # AcceptStats <a.b.c.d>[/<mask>] (like 10.0.0.4 or 10.0.0.0/24)
>>>> will accept
>>>> # statistics originating from that IP or IP network.
>>>> # This option can be cascaded.
>>>>
>>>> UnixSocketDir /var/lib/backhand
>>>> # MulticastStats 128.220.221.255:4445
>>>> # MulticastStats 225.220.221.20:4445,1
>>>> # AcceptStats 128.220.221.0/24
>>>>
>>>> # Note that you _must_ configure the MulticastStats/AcceptStats
>>>> directives, # otherwise apache will segfault!
>>>>
>>>> # This is a status of sorts. Visit it and see how valuable it is
>>>> to you.
>>>> <Location "/backhand/">
>>>> SetHandler backhand-handler
>>>> </Location>
>>>> </IfModule>
>>>>
>>>>
>>>> #
>>>> # ErrorLog: The location of the error log file.
>>>> # If you do not specify an ErrorLog directive within a <VirtualHost>
>>>> # container, error messages relating to that virtual host will be
>>>> # logged here. If you *do* define an error logfile for a
>>>> <VirtualHost>
>>>> # container, that host's errors will be logged there and not here.
>>>> #
>>>> ErrorLog /var/log/httpd/error_log
>>>>
>>>> #
>>>> # LogLevel: Control the number of messages logged to the error_log.
>>>> # Possible values include: debug, info, notice, warn, error, crit,
>>>> # alert, emerg.
>>>> #
>>>> LogLevel warn
>>>>
>>>> #
>>>> # The following directives define some format nicknames for use with
>>>> # a CustomLog directive (see below).
>>>> #
>>>> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
>>>> \"%{User-Agent}i\"" combined
>>>> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>>>> LogFormat "%{Referer}i -> %U" referer
>>>> LogFormat "%{User-agent}i" agent
>>>>
>>>> #
>>>> # The location and format of the access logfile (Common Logfile
>>>> Format).
>>>> # If you do not define any access logfiles within a <VirtualHost>
>>>> # container, they will be logged here. Contrariwise, if you *do*
>>>> # define per-<VirtualHost> access logfiles, transactions will be
>>>> # logged therein and *not* in this file.
>>>> #
>>>> CustomLog /var/log/httpd/access_log common
>>>>
>>>> #
>>>> # If you would like to have agent and referer logfiles, uncomment the
>>>> # following directives.
>>>> #
>>>> #CustomLog /var/log/httpd/referer_log referer
>>>> #CustomLog /var/log/httpd/agent_log agent
>>>>
>>>> #
>>>> # If you prefer a single logfile with access, agent, and referer
>>>> information
>>>> # (Combined Logfile Format) you can use the following directive.
>>>> #
>>>> #CustomLog /var/log/httpd/access_log combined
>>>>
>>>> #
>>>> # Optionally add a line containing the server version and virtual host
>>>> # name to server-generated pages (error documents, FTP directory
>>>> listings,
>>>> # mod_status and mod_info output etc., but not CGI generated
>>>> documents).
>>>> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
>>>> # Set to one of: On | Off | EMail
>>>> #
>>>>
>>>> # Note: this is set by SuSEconfig according to the setting of the
>>>> # HTTPD_SEC_SAY_FULLNAME variable in /etc/sysconfig/apache!
>>>> ServerSignature On
>>>>
>>>>
>>>> # EBCDIC configuration:
>>>> # (only for mainframes using the EBCDIC codeset, currently one of:
>>>> # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
>>>> # The following default configuration assumes that "text files"
>>>> # are stored in EBCDIC (so that you can operate on them using the
>>>> # normal POSIX tools like grep and sort) while "binary files" are
>>>> # stored with identical octets as on an ASCII machine.
>>>> #
>>>> # The directives are evaluated in configuration file order, with
>>>> # the EBCDICConvert directives applied before EBCDICConvertByType.
>>>> #
>>>> # If you want to have ASCII HTML documents and EBCDIC HTML documents
>>>> # at the same time, you can use the file extension to force
>>>> # conversion off for the ASCII documents:
>>>> # > AddType text/html .ahtml
>>>> # > EBCDICConvert Off=InOut .ahtml
>>>> #
>>>> # EBCDICConvertByType On=InOut text/* message/* multipart/*
>>>> # EBCDICConvertByType On=In application/x-www-form-urlencoded
>>>> # EBCDICConvertByType On=InOut application/postscript model/vrml
>>>> # EBCDICConvertByType Off=InOut */*
>>>>
>>>>
>>>> #
>>>> # Aliases: Add here as many aliases as you need (with no limit).
>>>> The format is # Alias fakename realname
>>>> #
>>>> <IfModule mod_alias.c>
>>>>
>>>> #
>>>> # Note that if you include a trailing / on fakename then the
>>>> server will
>>>> # require it to be present in the URL. So "/icons" isn't
>>>> aliased in this
>>>> # example, only "/icons/". If the fakename is slash-terminated,
>>>> then the # realname must also be slash terminated, and if the
>>>> fakename omits the # trailing slash, the realname must also omit
>>>> it.
>>>> #
>>>> Alias /icons/ "/srv/www/icons/"
>>>>
>>>> <Directory "/srv/www/icons">
>>>> Options Indexes MultiViews
>>>> AllowOverride None
>>>> Order allow,deny
>>>> Allow from all
>>>> </Directory>
>>>>
>>>> # This Alias will project the on-line documentation tree under
>>>> /manual/
>>>> # even if you change the DocumentRoot. Comment it if you don't
>>>> want to # provide access to the on-line documentation.
>>>> #
>>>> Alias /manual/ "/srv/www/htdocs/manual/"
>>>>
>>>> <Directory "/srv/www/htdocs/manual">
>>>> Options Indexes FollowSymlinks MultiViews
>>>> AllowOverride None
>>>> Order allow,deny
>>>> Allow from all
>>>> </Directory>
>>>>
>>>> #
>>>> # ScriptAlias: This controls which directories contain server
>>>> scripts.
>>>> # ScriptAliases are essentially the same as Aliases, except that
>>>> # documents in the realname directory are treated as
>>>> applications and
>>>> # run by the server when requested rather than as documents sent
>>>> to the client.
>>>> # The same rules about trailing "/" apply to ScriptAlias
>>>> directives as to
>>>> # Alias.
>>>> #
>>>> ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"
>>>>
>>>> <IfModule mod_perl.c>
>>>> # Provide two aliases to the same cgi-bin directory, # to see
>>>> the effects of the 2 different mod_perl modes.
>>>> # for Apache::Registry Mode
>>>> ScriptAlias /perl/ "/srv/www/cgi-bin/"
>>>> # for Apache::Perlrun Mode
>>>> ScriptAlias /cgi-perl/ "/srv/www/cgi-bin/"
>>>> </IfModule>
>>>> #
>>>> # "/srv/www/cgi-bin" should be changed to whatever your
>>>> ScriptAliased
>>>> # CGI directory exists, if you have that configured.
>>>> #
>>>> <Directory "/srv/www/cgi-bin">
>>>> AllowOverride None
>>>> Options None
>>>> Order allow,deny
>>>> Allow from all
>>>> </Directory>
>>>>
>>>> </IfModule>
>>>> # End of aliases.
>>>>
>>>>
>>>> #
>>>> # set /cgi-bin for CGI execution
>>>> #
>>>> <Location /cgi-bin>
>>>> AllowOverride None
>>>> Options +ExecCGI -Includes
>>>> SetHandler cgi-script
>>>> </Location>
>>>>
>>>> #
>>>> # If mod_perl is activated, load configuration information
>>>> #
>>>> <IfModule mod_perl.c>
>>>> Perlrequire /usr/include/apache/modules/perl/startup.perl
>>>> PerlModule Apache::Registry
>>>>
>>>> #
>>>> # set Apache::Registry Mode for /perl Alias
>>>> #
>>>> <Location /perl>
>>>> SetHandler perl-script
>>>> PerlHandler Apache::Registry
>>>> Options ExecCGI
>>>> PerlSendHeader On
>>>> </Location>
>>>>
>>>> #
>>>> # set Apache::PerlRun Mode for /cgi-perl Alias
>>>> #
>>>> <Location /cgi-perl>
>>>> SetHandler perl-script
>>>> PerlHandler Apache::PerlRun
>>>> Options ExecCGI
>>>> PerlSendHeader On
>>>> </Location>
>>>>
>>>> </IfModule>
>>>>
>>>>
>>>>
>>>> #
>>>> # Redirect allows you to tell clients about documents which used to
>>>> exist in
>>>> # your server's namespace, but do not anymore. This allows you to
>>>> tell the
>>>> # clients where to look for the relocated document.
>>>> # Format: Redirect old-URI new-URL
>>>> #
>>>>
>>>> #
>>>> # Directives controlling the display of server-generated directory
>>>> listings.
>>>> #
>>>> <IfModule mod_autoindex.c>
>>>>
>>>> #
>>>> # FancyIndexing is whether you want fancy directory indexing or
>>>> standard
>>>> #
>>>> IndexOptions FancyIndexing
>>>>
>>>> #
>>>> # AddIcon* directives tell the server which icon to show for
>>>> different
>>>> # files or filename extensions. These are only displayed for
>>>> # FancyIndexed directories.
>>>> #
>>>> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>>>>
>>>> AddIconByType (TXT,/icons/text.gif) text/*
>>>> AddIconByType (IMG,/icons/image2.gif) image/*
>>>> AddIconByType (SND,/icons/sound2.gif) audio/*
>>>> AddIconByType (VID,/icons/movie.gif) video/*
>>>>
>>>> AddIcon /icons/binary.gif .bin .exe
>>>> AddIcon /icons/binhex.gif .hqx
>>>> AddIcon /icons/tar.gif .tar
>>>> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
>>>> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
>>>> AddIcon /icons/a.gif .ps .ai .eps
>>>> AddIcon /icons/layout.gif .html .shtml .htm .pdf
>>>> AddIcon /icons/text.gif .txt
>>>> AddIcon /icons/c.gif .c
>>>> AddIcon /icons/p.gif .pl .py
>>>> AddIcon /icons/f.gif .for
>>>> AddIcon /icons/dvi.gif .dvi
>>>> AddIcon /icons/uuencoded.gif .uu
>>>> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
>>>> AddIcon /icons/tex.gif .tex
>>>> AddIcon /icons/bomb.gif core
>>>>
>>>> AddIcon /icons/back.gif ..
>>>> AddIcon /icons/hand.right.gif README
>>>> AddIcon /icons/folder.gif ^^DIRECTORY^^
>>>> AddIcon /icons/blank.gif ^^BLANKICON^^
>>>>
>>>> #
>>>> # DefaultIcon is which icon to show for files which do not have
>>>> an icon
>>>> # explicitly set.
>>>> #
>>>> DefaultIcon /icons/unknown.gif
>>>>
>>>> #
>>>> # AddDescription allows you to place a short description after a
>>>> file in
>>>> # server-generated indexes. These are only displayed for
>>>> FancyIndexed
>>>> # directories.
>>>> # Format: AddDescription "description" filename
>>>> #
>>>> AddDescription "GZIP compressed document" .gz
>>>> AddDescription "tar archive" .tar
>>>> AddDescription "GZIP compressed tar archive" .tgz
>>>>
>>>> #
>>>> # ReadmeName is the name of the README file the server will look
>>>> for by
>>>> # default, and append to directory listings.
>>>> #
>>>> # HeaderName is the name of a file which should be prepended to
>>>> # directory indexes. #
>>>> # If MultiViews are amongst the Options in effect, the server will
>>>> # first look for name.html and include it if found. If name.html
>>>> # doesn't exist, the server will then look for name.txt and include
>>>> # it as plaintext if found.
>>>> #
>>>> ReadmeName README
>>>> HeaderName HEADER
>>>>
>>>> #
>>>> # IndexIgnore is a set of filenames which directory indexing
>>>> should ignore
>>>> # and not include in the listing. Shell-style wildcarding is
>>>> permitted.
>>>> #
>>>> IndexIgnore .??* *~ *# RCS CVS *,v *,t
>>>>
>>>> </IfModule>
>>>> # End of indexing directives.
>>>>
>>>> #
>>>> # Document types.
>>>> #
>>>> <IfModule mod_mime.c>
>>>>
>>>> #
>>>> # AddEncoding allows you to have certain browsers (Mosaic/X
>>>> 2.1+) uncompress
>>>> # information on the fly. Note: Not all browsers support this.
>>>> # Despite the name similarity, the following Add* directives
>>>> have nothing
>>>> # to do with the FancyIndexing customization directives above.
>>>> #
>>>> AddEncoding x-compress Z
>>>> AddEncoding x-gzip gz tgz
>>>>
>>>> #
>>>> # AddLanguage allows you to specify the language of a document.
>>>> You can
>>>> # then use content negotiation to give a browser a file in a
>>>> language
>>>> # it can understand. #
>>>> # Note 1: The suffix does not have to be the same as the
>>>> language # keyword --- those with documents in Polish (whose
>>>> net-standard # language code is pl) may wish to use "AddLanguage
>>>> pl .po" to # avoid the ambiguity with the common suffix for perl
>>>> scripts.
>>>> #
>>>> # Note 2: The example entries below illustrate that in quite
>>>> # some cases the two character 'Language' abbreviation is not
>>>> # identical to the two character 'Country' code for its country,
>>>> # E.g. 'Danmark/dk' versus 'Danish/da'.
>>>> #
>>>> # Note 3: In the case of 'ltz' we violate the RFC by using a
>>>> three char # specifier. But there is 'work in progress' to fix
>>>> this and get # the reference data for rfc1766 cleaned up.
>>>> #
>>>> # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
>>>> # French (fr) - German (de) - Greek-Modern (el)
>>>> # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian
>>>> Nynorsk (nn)
>>>> # Portugese (pt) - Luxembourgeois* (ltz)
>>>> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
>>>> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
>>>> # Russian (ru)
>>>> #
>>>> AddLanguage da .dk
>>>> AddLanguage nl .nl
>>>> AddLanguage en .en
>>>> AddLanguage et .ee
>>>> AddLanguage fr .fr
>>>> AddLanguage de .de
>>>> AddLanguage el .el
>>>> AddLanguage he .he
>>>> AddCharset ISO-8859-8 .iso8859-8
>>>> AddLanguage it .it
>>>> AddLanguage ja .ja
>>>> AddCharset ISO-2022-JP .jis
>>>> AddLanguage kr .kr
>>>> AddCharset ISO-2022-KR .iso-kr
>>>> AddLanguage nn .nn
>>>> AddLanguage no .no
>>>> AddLanguage pl .po
>>>> AddCharset ISO-8859-2 .iso-pl
>>>> AddLanguage pt .pt
>>>> AddLanguage pt-br .pt-br
>>>> AddLanguage ltz .lu
>>>> AddLanguage ca .ca
>>>> AddLanguage es .es
>>>> AddLanguage sv .sv
>>>> AddLanguage cz .cz
>>>> AddLanguage ru .ru
>>>> AddLanguage zh-tw .tw
>>>> AddLanguage tw .tw
>>>> AddCharset Big5 .Big5 .big5
>>>> AddCharset WINDOWS-1251 .cp-1251
>>>> AddCharset CP866 .cp866
>>>> AddCharset ISO-8859-5 .iso-ru
>>>> AddCharset KOI8-R .koi8-r
>>>> AddCharset UCS-2 .ucs2
>>>> AddCharset UCS-4 .ucs4
>>>> AddCharset UTF-8 .utf8
>>>>
>>>> # LanguagePriority allows you to give precedence to some languages
>>>> # in case of a tie during content negotiation.
>>>> #
>>>> # Just list the languages in decreasing order of preference. We
>>>> have
>>>> # more or less alphabetized them here. You probably want to
>>>> change this.
>>>> #
>>>> <IfModule mod_negotiation.c>
>>>> LanguagePriority en da nl et fr de el it ja kr no pl pt
>>>> pt-br ru ltz ca es sv tw
>>>> </IfModule>
>>>>
>>>> #
>>>> # AddType allows you to tweak mime.types without actually
>>>> editing it, or to
>>>> # make certain files to be certain types.
>>>> #
>>>> AddType application/x-tar .tgz
>>>>
>>>> # Some more types:
>>>>
>>>> #
>>>> # PHP 3.x:
>>>> #
>>>> <IfModule mod_php3.c>
>>>> AddType application/x-httpd-php3 .php3
>>>> AddType application/x-httpd-php3-source .phps
>>>> AddType application/x-httpd-php3 .phtml
>>>> </IfModule>
>>>>
>>>> #
>>>> # PHP 4.x:
>>>> #
>>>> <IfModule mod_php4.c>
>>>> AddType application/x-httpd-php .php
>>>> AddType application/x-httpd-php .php4
>>>> AddType application/x-httpd-php-source .phps
>>>> </IfModule>
>>>>
>>>> #
>>>> # mod_dtcl can execute tcl scripts
>>>> #
>>>> <IfModule mod_dtcl.c>
>>>> AddType application/x-httpd-tcl .ttml
>>>> AddType application/x-dtcl-tcl .tcl
>>>> </IfModule>
>>>>
>>>> AddType text/vnd.wap.wml wml
>>>> AddType text/vnd.wap.wmlscript wmls
>>>> AddType application/vnd.wap.wmlc wmlc
>>>> AddType application/vnd.wap.wmlscriptc wmlsc
>>>> Addtype image/vnd.wap.wbmp wbmp
>>>> #
>>>> # AddHandler allows you to map certain file extensions to
>>>> "handlers",
>>>> # actions unrelated to filetype. These can be either built into
>>>> the server
>>>> # or added with the Action command (see below)
>>>> #
>>>> # If you want to use server side includes, or CGI outside
>>>> # ScriptAliased directories, uncomment the following lines.
>>>> #
>>>> # To use CGI scripts:
>>>> #
>>>> AddHandler cgi-script .cgi
>>>>
>>>> #
>>>> # To use server-parsed HTML files
>>>> #
>>>> AddType text/html .shtml
>>>> AddHandler server-parsed .shtml
>>>>
>>>> #
>>>> # Uncomment the following line to enable Apache's send-asis HTTP
>>>> file
>>>> # feature
>>>> #
>>>> #AddHandler send-as-is asis
>>>>
>>>> #
>>>> # If you wish to use server-parsed imagemap files, use
>>>> #
>>>> #AddHandler imap-file map
>>>>
>>>> #
>>>> # To enable type maps, you might want to use
>>>> #
>>>> #AddHandler type-map var
>>>>
>>>> </IfModule>
>>>> # End of document types.
>>>>
>>>> #
>>>> # Action lets you define media types that will execute a script
>>>> whenever
>>>> # a matching file is called. This eliminates the need for repeated URL
>>>> # pathnames for oft-used CGI file processors.
>>>> # Format: Action media/type /cgi-script/location
>>>> # Format: Action handler-name /cgi-script/location
>>>> #
>>>>
>>>> #
>>>> # MetaDir: specifies the name of the directory in which Apache can
>>>> find
>>>> # meta information files. These files contain additional HTTP headers
>>>> # to include when sending the document
>>>> #
>>>> #MetaDir .web
>>>>
>>>> #
>>>> # MetaSuffix: specifies the file name suffix for the file
>>>> containing the
>>>> # meta information.
>>>> #
>>>> #MetaSuffix .meta
>>>>
>>>> #
>>>> # Customizable error response (Apache style)
>>>> # these come in three flavors
>>>> #
>>>> # 1) plain text
>>>> #ErrorDocument 500 "The server made a boo boo.
>>>> # n.b. the single leading (") marks it as text, it does not get
>>>> output
>>>> #
>>>> # 2) local redirects
>>>> #ErrorDocument 404 /missing.html
>>>> # to redirect to local URL /missing.html
>>>> #ErrorDocument 404 /cgi-bin/missing_handler.pl
>>>> # N.B.: You can redirect to a script or a document using
>>>> server-side-includes.
>>>> #
>>>> # 3) external redirects
>>>> #ErrorDocument 402 http://some.other-server.com/subscription_info.html
>>>> # N.B.: Many of the environment variables associated with the
>>>> original
>>>> # request will *not* be available to such a script.
>>>>
>>>> #
>>>> # Customize behaviour based on the browser
>>>> #
>>>> <IfModule mod_setenvif.c>
>>>>
>>>> #
>>>> # The following directives modify normal HTTP response behavior.
>>>> # The first directive disables keepalive for Netscape 2.x and
>>>> browsers that
>>>> # spoof it. There are known problems with these browser
>>>> implementations.
>>>> # The second directive is for Microsoft Internet Explorer 4.0b2
>>>> # which has a broken HTTP/1.1 implementation and does not properly
>>>> # support keepalive when it is used on 301 or 302 (redirect)
>>>> responses.
>>>> #
>>>> BrowserMatch "Mozilla/2" nokeepalive
>>>> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
>>>> force-response-1.0
>>>>
>>>> #
>>>> # The following directive disables HTTP/1.1 responses to
>>>> browsers which
>>>> # are in violation of the HTTP/1.0 spec by not being able to grok a
>>>> # basic 1.1 response.
>>>> #
>>>> BrowserMatch "RealPlayer 4\.0" force-response-1.0
>>>> BrowserMatch "Java/1\.0" force-response-1.0
>>>> BrowserMatch "JDK/1\.0" force-response-1.0
>>>>
>>>> </IfModule>
>>>> # End of browser customization directives
>>>>
>>>> #
>>>> # Allow server status reports, with the URL of
>>>> http://servername/server-status
>>>> # Change the ".your-domain.com" to match your domain to enable.
>>>> #
>>>> # Note: apache is started (by /etc/init.d/apache) with -D STATUS if
>>>> # HTTPD_SEC_ACCESS_SERVERINFO is set to "yes" in #
>>>> /etc/sysconfig/apache.
>>>>
>>>> <IfDefine STATUS>
>>>> <Location /server-status>
>>>> SetHandler server-status
>>>> Order deny,allow
>>>> Deny from all
>>>> Allow from localhost
>>>> </Location>
>>>>
>>>> #
>>>> # Allow remote server configuration reports, with the URL of
>>>> # http://servername/server-info (requires that mod_info.c be loaded).
>>>> # Change the ".your-domain.com" to match your domain to enable.
>>>> #
>>>> <Location /server-info>
>>>> SetHandler server-info
>>>> Order deny,allow
>>>> Deny from all
>>>> Allow from localhost
>>>> </Location>
>>>>
>>>> #
>>>> # enable perl-status for mod_perl
>>>> #
>>>> <IfModule mod_perl.c>
>>>> <Location /perl-status>
>>>> SetHandler perl-script
>>>> PerlHandler Apache::Status
>>>> order deny,allow
>>>> deny from all
>>>> allow from localhost
>>>> </Location>
>>>> </IfModule>
>>>> </IfDefine>
>>>>
>>>>
>>>> #
>>>> # There have been reports of people trying to abuse an old bug from
>>>> pre-1.1
>>>> # days. This bug involved a CGI script distributed as a part of
>>>> Apache.
>>>> # By uncommenting these lines you can redirect these attacks to a
>>>> logging # script on phf.apache.org. Or, you can record them
>>>> yourself, using the script
>>>> # support/phf_abuse_log.cgi.
>>>> #
>>>> #<Location /cgi-bin/phf*>
>>>> # Deny from all
>>>> # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
>>>> #</Location>
>>>>
>>>> #
>>>> # Proxy Server directives. Uncomment the following lines to
>>>> # enable the proxy server:
>>>> #
>>>> #<IfModule mod_proxy.c>
>>>> # ProxyRequests On
>>>>
>>>> # <Directory proxy:*>
>>>> # Order deny,allow
>>>> # Deny from all
>>>> # Allow from .your-domain.com
>>>> # </Directory>
>>>>
>>>> #
>>>> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
>>>> # ("Full" adds the server version; "Block" removes all outgoing
>>>> Via: headers)
>>>> # Set to one of: Off | On | Full | Block
>>>> #
>>>> # ProxyVia On
>>>>
>>>> #
>>>> # To enable the cache as well, edit and uncomment the following
>>>> lines:
>>>> # (no cacheing without CacheRoot)
>>>> #
>>>> # CacheRoot "/var/cache/http"
>>>> # CacheSize 5
>>>> # CacheGcInterval 4
>>>> # CacheMaxExpire 24
>>>> # CacheLastModifiedFactor 0.1
>>>> # CacheDefaultExpire 1
>>>> # NoCache a-domain.com another-domain.edu joes.garage-sale.com
>>>>
>>>> #</IfModule>
>>>> # End of proxy directives.
>>>>
>>>> ### Section 3: Virtual Hosts
>>>> #
>>>> # VirtualHost: If you want to maintain multiple domains/hostnames
>>>> on your
>>>> # machine you can setup VirtualHost containers for them. Most
>>>> configurations
>>>> # use only name-based virtual hosts so the server doesn't need to
>>>> worry about
>>>> # IP addresses. This is indicated by the asterisks in the
>>>> directives below.
>>>> #
>>>> # Please see the documentation at
>>>> <URL:http://www.apache.org/docs/vhosts/>
>>>> # for further details before you try to setup virtual hosts.
>>>> #
>>>> # You may use the command line option '-S' to verify your virtual host
>>>> # configuration.
>>>>
>>>> #
>>>> # Use name-based virtual hosting.
>>>> #
>>>> #NameVirtualHost *
>>>>
>>>> #
>>>> # VirtualHost example:
>>>> # Almost any Apache directive may go into a VirtualHost container.
>>>> # The first VirtualHost section is used for requests without a known
>>>> # server name.
>>>> #
>>>> #<VirtualHost *>
>>>> # ServerAdmin webmaster@dummy-host.example.com
>>>> # DocumentRoot /www/docs/dummy-host.example.com
>>>> # ServerName dummy-host.example.com
>>>> # ErrorLog logs/dummy-host.example.com-error_log
>>>> # CustomLog logs/dummy-host.example.com-access_log common
>>>> #</VirtualHost>
>>>>
>>>> #<VirtualHost _default_:*>
>>>> #</VirtualHost>
>>>>
>>>> ##
>>>> ## SSL Global Context
>>>> ##
>>>> ## All SSL configuration in this context applies both to
>>>> ## the main server and all SSL-enabled virtual hosts.
>>>> ##
>>>>
>>>> #
>>>> # Some MIME-types for downloading Certificates and CRLs
>>>> #
>>>> <IfDefine SSL>
>>>> AddType application/x-x509-ca-cert .crt
>>>> AddType application/x-pkcs7-crl .crl
>>>> </IfDefine>
>>>>
>>>> <IfModule mod_ssl.c>
>>>>
>>>> # Pass Phrase Dialog:
>>>> # Configure the pass phrase gathering process.
>>>> # The filtering dialog program (`builtin' is a internal
>>>> # terminal dialog) has to provide the pass phrase on stdout.
>>>> SSLPassPhraseDialog builtin
>>>>
>>>> # Inter-Process Session Cache:
>>>> # Configure the SSL Session Cache: First the mechanism # to use
>>>> and second the expiring timeout (in seconds).
>>>> #SSLSessionCache none
>>>> #SSLSessionCache shmht:/var/run/ssl_scache(512000)
>>>> #SSLSessionCache shmcb:/var/run/ssl_scache(512000)
>>>> SSLSessionCache dbm:/var/run/ssl_scache
>>>> SSLSessionCacheTimeout 300
>>>>
>>>> # Semaphore:
>>>> # Configure the path to the mutual exclusion semaphore the
>>>> # SSL engine uses internally for inter-process synchronization.
>>>> SSLMutex file:/var/run/ssl_mutex
>>>>
>>>> # Pseudo Random Number Generator (PRNG):
>>>> # Configure one or more sources to seed the PRNG of the # SSL
>>>> library. The seed data should be of good random quality.
>>>> # WARNING! On some platforms /dev/random blocks if not enough
>>>> entropy
>>>> # is available. This means you then cannot use the /dev/random
>>>> device
>>>> # because it would lead to very long connection times (as long as
>>>> # it requires to make more entropy available). But usually those
>>>> # platforms additionally provide a /dev/urandom device which doesn't
>>>> # block. So, if available, use this one instead. Read the mod_ssl
>>>> User
>>>> # Manual for more details.
>>>> SSLRandomSeed startup builtin
>>>> SSLRandomSeed connect builtin
>>>> #SSLRandomSeed startup file:/dev/random 512
>>>> #SSLRandomSeed startup file:/dev/urandom 512
>>>> #SSLRandomSeed connect file:/dev/random 512
>>>> #SSLRandomSeed connect file:/dev/urandom 512
>>>>
>>>> # Logging:
>>>> # The home of the dedicated SSL protocol logfile. Errors are
>>>> # additionally duplicated in the general error log file. Put
>>>> # this somewhere where it cannot be used for symlink attacks on
>>>> # a real server (i.e. somewhere where only root can write).
>>>> # Log levels are (ascending order: higher ones include lower ones):
>>>> # none, error, warn, info, trace, debug.
>>>> SSLLog /var/log/httpd/ssl_engine_log
>>>> SSLLogLevel info
>>>>
>>>> </IfModule>
>>>>
>>>> <IfDefine SSL>
>>>>
>>>> ##
>>>> ## SSL Virtual Host Context
>>>> ##
>>>>
>>>> <VirtualHost _default_:443>
>>>>
>>>> # General setup for the virtual host
>>>> DocumentRoot "/srv/www/htdocs"
>>>> ServerName new.host.name
>>>> ServerAdmin you@your.address
>>>> ErrorLog /var/log/httpd/error_log
>>>> TransferLog /var/log/httpd/access_log
>>>>
>>>> # SSL Engine Switch:
>>>> # Enable/Disable SSL for this virtual host.
>>>> SSLEngine on
>>>>
>>>> # SSL Cipher Suite:
>>>> # List the ciphers that the client is permitted to negotiate.
>>>> # See the mod_ssl documentation for a complete list.
>>>> SSLCipherSuite
>>>> ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
>>>>
>>>> # Server Certificate:
>>>> # Point SSLCertificateFile at a PEM encoded certificate. If
>>>> # the certificate is encrypted, then you will be prompted for a
>>>> # pass phrase. Note that a kill -HUP will prompt again. A test
>>>> # certificate can be generated with `make certificate' under
>>>> # built time. Keep in mind that if you've both a RSA and a DSA
>>>> # certificate you can configure both in parallel (to also allow
>>>> # the use of DSA ciphers, etc.)
>>>> SSLCertificateFile /etc/httpd/ssl.crt/server.crt
>>>> #SSLCertificateFile /etc/httpd/ssl.crt/server-dsa.crt
>>>>
>>>> # Server Private Key:
>>>> # If the key is not combined with the certificate, use this
>>>> # directive to point at the key file. Keep in mind that if
>>>> # you've both a RSA and a DSA private key you can configure
>>>> # both in parallel (to also allow the use of DSA ciphers, etc.)
>>>> SSLCertificateKeyFile /etc/httpd/ssl.key/server.key
>>>> #SSLCertificateKeyFile /etc/httpd/ssl.key/server-dsa.key
>>>>
>>>> # Server Certificate Chain:
>>>> # Point SSLCertificateChainFile at a file containing the
>>>> # concatenation of PEM encoded CA certificates which form the
>>>> # certificate chain for the server certificate. Alternatively
>>>> # the referenced file can be the same as SSLCertificateFile
>>>> # when the CA certificates are directly appended to the server
>>>> # certificate for convinience.
>>>> #SSLCertificateChainFile /etc/httpd/ssl.crt/ca.crt
>>>>
>>>> # Certificate Authority (CA):
>>>> # Set the CA certificate verification path where to find CA
>>>> # certificates for client authentication or alternatively one
>>>> # huge file containing all of them (file must be PEM encoded)
>>>> # Note: Inside SSLCACertificatePath you need hash symlinks
>>>> # to point to the certificate files. Use the provided
>>>> # Makefile to update the hash symlinks after changes.
>>>> #SSLCACertificatePath /etc/httpd/ssl.crt
>>>> #SSLCACertificateFile /etc/httpd/ssl.crt/ca-bundle.crt
>>>>
>>>> # Certificate Revocation Lists (CRL):
>>>> # Set the CA revocation path where to find CA CRLs for client
>>>> # authentication or alternatively one huge file containing all
>>>> # of them (file must be PEM encoded)
>>>> # Note: Inside SSLCARevocationPath you need hash symlinks
>>>> # to point to the certificate files. Use the provided
>>>> # Makefile to update the hash symlinks after changes.
>>>> #SSLCARevocationPath /etc/httpd/ssl.crl
>>>> #SSLCARevocationFile /etc/httpd/ssl.crl/ca-bundle.crl
>>>>
>>>> # Client Authentication (Type):
>>>> # Client certificate verification type and depth. Types are
>>>> # none, optional, require and optional_no_ca. Depth is a
>>>> # number which specifies how deeply to verify the certificate
>>>> # issuer chain before deciding the certificate is not valid.
>>>> #SSLVerifyClient require
>>>> #SSLVerifyDepth 10
>>>>
>>>> # Access Control:
>>>> # With SSLRequire you can do per-directory access control based
>>>> # on arbitrary complex boolean expressions containing server
>>>> # variable checks and other lookup directives. The syntax is a
>>>> # mixture between C and Perl. See the mod_ssl documentation
>>>> # for more details.
>>>> #<Location />
>>>> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
>>>> # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
>>>> # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
>>>> # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
>>>> # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
>>>> # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
>>>> #</Location>
>>>>
>>>> # SSL Engine Options:
>>>> # Set various options for the SSL engine.
>>>> # o FakeBasicAuth:
>>>> # Translate the client X.509 into a Basic Authorisation. This
>>>> means that
>>>> # the standard Auth/DBMAuth methods can be used for access
>>>> control. The
>>>> # user name is the `one line' version of the client's X.509
>>>> certificate.
>>>> # Note that no password is obtained from the user. Every entry
>>>> in the user
>>>> # file needs this password: `xxj31ZMTZzkVA'.
>>>> # o ExportCertData:
>>>> # This exports two additional environment variables:
>>>> SSL_CLIENT_CERT and
>>>> # SSL_SERVER_CERT. These contain the PEM-encoded certificates
>>>> of the
>>>> # server (always existing) and the client (only existing when
>>>> client
>>>> # authentication is used). This can be used to import the
>>>> certificates
>>>> # into CGI scripts.
>>>> # o StdEnvVars:
>>>> # This exports the standard SSL/TLS related `SSL_*' environment
>>>> variables.
>>>> # Per default this exportation is switched off for performance
>>>> reasons,
>>>> # because the extraction step is an expensive operation and is
>>>> usually
>>>> # useless for serving static content. So one usually enables the
>>>> # exportation for CGI and SSI requests only.
>>>> # o CompatEnvVars:
>>>> # This exports obsolete environment variables for backward
>>>> compatibility
>>>> # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold
>>>> 2.x. Use this
>>>> # to provide compatibility to existing CGI scripts.
>>>> # o StrictRequire:
>>>> # This denies access when "SSLRequireSSL" or "SSLRequire"
>>>> applied even
>>>> # under a "Satisfy any" situation, i.e. when it applies access
>>>> is denied
>>>> # and no other module can change it.
>>>> # o OptRenegotiate:
>>>> # This enables optimized SSL connection renegotiation handling
>>>> when SSL
>>>> # directives are used in per-directory context. #SSLOptions
>>>> +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
>>>> <Files ~ "\.(cgi|shtml|phtml|php3?)$">
>>>> SSLOptions +StdEnvVars
>>>> </Files>
>>>> <Directory "/srv/www/cgi-bin">
>>>> SSLOptions +StdEnvVars
>>>> </Directory>
>>>>
>>>> # SSL Protocol Adjustments:
>>>> # The safe and default but still SSL/TLS standard compliant shutdown
>>>> # approach is that mod_ssl sends the close notify alert but
>>>> doesn't wait for
>>>> # the close notify alert from client. When you need a different
>>>> shutdown
>>>> # approach you can use one of the following variables:
>>>> # o ssl-unclean-shutdown:
>>>> # This forces an unclean shutdown when the connection is
>>>> closed, i.e. no
>>>> # SSL close notify alert is send or allowed to received. This
>>>> violates
>>>> # the SSL/TLS standard but is needed for some brain-dead
>>>> browsers. Use
>>>> # this when you receive I/O errors because of the standard
>>>> approach where
>>>> # mod_ssl sends the close notify alert.
>>>> # o ssl-accurate-shutdown:
>>>> # This forces an accurate shutdown when the connection is
>>>> closed, i.e. a
>>>> # SSL close notify alert is send and mod_ssl waits for the
>>>> close notify
>>>> # alert of the client. This is 100% SSL/TLS standard compliant,
>>>> but in
>>>> # practice often causes hanging connections with brain-dead
>>>> browsers. Use
>>>> # this only for browsers where you know that their SSL
>>>> implementation
>>>> # works correctly. # Notice: Most problems of broken clients
>>>> are also related to the HTTP
>>>> # keep-alive facility, so you usually additionally want to disable
>>>> # keep-alive for those clients, too. Use variable "nokeepalive"
>>>> for this.
>>>> # Similarly, one has to force some clients to use HTTP/1.0 to
>>>> workaround
>>>> # their broken HTTP/1.1 implementation. Use variables
>>>> "downgrade-1.0" and
>>>> # "force-response-1.0" for this.
>>>> SetEnvIf User-Agent ".*MSIE.*" \
>>>> nokeepalive ssl-unclean-shutdown \
>>>> downgrade-1.0 force-response-1.0
>>>>
>>>> # Per-Server Logging:
>>>> # The home of a custom SSL log file. Use this when you want a
>>>> # compact non-error SSL logfile on a virtual host basis.
>>>> CustomLog /var/log/httpd/ssl_request_log \
>>>> "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
>>>>
>>>> </VirtualHost> </IfDefine>
>>>>
>>>>
>>>>
>>>> # Note:
>>>> #
>>>> # The file that is included below is generated by SuSEconfig.
>>>> #
>>>> # In this file, SuSEconfig puts Include statements it finds
>>>> # in /etc/httpd/modules/* (lines with "File:..." or "Include:...").
>>>> # If such a module file also contains a "Variable:..." statement,
>>>> the settings # in /etc/sysconfig/apache will be honored. # # In
>>>> addition, any files listed in the HTTPD_CONF_INCLUDE_FILES variable
>>>> # in /etc/sysconfig/apache will be included here by SuSEconfig. #
>>>> This allows you to add e.g. VirtualHost statements without touching
>>>> # /etc/httpd/httpd.conf itself, which means that SuSEconfig will
>>>> continue doing its
>>>> # job (since it would not touch httpd.conf any longer as soon it
>>>> detects changes
>>>> # made by the admin via the md5sum mechanism)
>>>>
>>>> # Include /etc/httpd/suse_include.conf
>>>>
>>>> Include
>>>> /home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>>>
>>>
>>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
>
--
Emerson Cargnin
Analista de Sitemas
Setor de Desenvolvimento de Sistemas - TRE-SC
tel : (048) - 251-3700 - Ramal 3181
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Qing Xie <xi...@ecopiabio.com>.
My guess was right. You have problems with you virtual host setting
because when JKMount is global, it works, when it's inside <VirtualHost
localhost>, it doesn't work.
You can search for my post in the past few days re virtual host. It may
help you.
Qing
Emerson Cargnin wrote:
> hi all.
>
> I commented out the include command at httpd.conf and put the following :
>
> #Include
> /home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>
> <IfModule mod_jk.c>
> JkWorkersFile
> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>
> JkLogFile
> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>
> JkLogLevel debug
>
> JkMount /examples ajp13
> JkMount /examples/* ajp13
>
> </IfModule>
>
> And it worked.... I don't undertand any more : )
>
> because i had this at auto/mod_jk.conf :
>
> ...
> JkMount /examples/jsp/security/protected/j_security_check ajp13
> JkMount /examples/snoop ajp13
> JkMount /examples/servlet/* ajp13
> JkMount /examples/CompressionTest ajp13
> JkMount /examples/*.jsp ajp13
> JkMount /examples/servletToJsp ajp13
> JkMount /examples/SendMailServlet ajp13
> ...
>
> Emerson Cargnin wrote:
>
>> forget to say : apache 1.3.(26) and tomcat 4.1.24
>>
>> thanks
>>
>> Emerson Cargnin wrote:
>>
>>> could someone send an working copy of server.xml,workers.properties
>>> and httpd.conf ?
>>> I need a conf with auto-conf working....
>>>
>>> Hey john, i attached the files you ask......
>>>
>>> I don't know why, but after changing debug direct at mod_jk.conf to
>>> emerg it looks that even when deleting this file, tomcat generates
>>> the conf file with emerg mode.... how i put this back? I tried to
>>> put debug="debug" at the "<listener..." under "<Host..." but it
>>> keeps generating emerg : )
>>>
>>> Thanks for your help....
>>>
>>>
>>> John Turner wrote:
>>>
>>>>
>>>> Are you sure you are using Apache 1.3? Apache 1 typically needs
>>>> both LoadModule and AddModule, you can always put the AddModule
>>>> directive into an IF statement if needed, there are several
>>>> examples of this in a default httpd.conf file.
>>>>
>>>> My HOWTO doesn't say anything about AddModule because my HOWTO
>>>> deals with Apache 2, and Apache 2 doesn't use AddModule.
>>>>
>>>> Regarding the Apache log error, my guess is your VirtualHosts are
>>>> not correct, it looks like Apache is looking for numguess.jsp
>>>> within its default DocumentRoot. In a typical, default Apache +
>>>> Tomcat installation, it would look for numguess.jsp in
>>>> /some/path/to/tomcat/webapps/examples/jsp. So, unless you have
>>>> installed Tomcat in /srv/www/htdocs
>>>> ($CATALINA_HOME=/srv/www/htdocs), something else isn't right.
>>>>
>>>> The "done without a worker" error is pretty self-explanatory.
>>>>
>>>> I'd suggest that the next step be that you post your mod_jk.conf
>>>> file and your workers.properties file, and describe CATALINA_HOME.
>>>>
>>>> John
>>>>
>>>> On Sat, 10 May 2003 19:34:22 -0300, Emerson Cargnin
>>>> <em...@tre-sc.gov.br> wrote:
>>>>
>>>>> At first thanks for your fast reply : )
>>>>>
>>>>> - about adding AddModule mod_jk.c (if you're using JK)
>>>>> I thing that adding the line "LoadModule jk_module
>>>>> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you
>>>>> told, and your tutorial doens't say anything about this line, but
>>>>> apache just give me the following warn telling that it's already
>>>>> loaded :
>>>>>
>>>>> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already
>>>>> added, skipping
>>>>>
>>>>> - I'm almost there :). following the steps you tell at the
>>>>> tutorial, it creates the mod_jk.conf ok, but it looks that mod_jk
>>>>> doesn't find the webapps, although it's configured allright :
>>>>>
>>>>>
>>>>> Apache log :
>>>>> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does
>>>>> not exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>>>>>
>>>>> mod_jk.log
>>>>>
>>>>> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
>>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
>>>>> jk_uri_worker_map_t::map_uri_to_worker
>>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]:
>>>>> Attempting to map URI '/examples/jsp/num/numguess.jsp'
>>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
>>>>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>>>>
>>>>>
>>>>> It looks everything you said before is allright...
>>>>> any clue?
>>>>>
>>>>> John Turner wrote:
>>>>>
>>>>>>
>>>>>>> From comments I've received, this HOWTO is not confusing. It
>>>>>>> uses Apache
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2, but the setup is the same for Apache 1.3. It uses JK. I've
>>>>>> never worked with SuSE, but I can't imagine it being much
>>>>>> different than Red Hat.
>>>>>>
>>>>>> http://www.johnturner.com/howto/rh72-howto.html
>>>>>>
>>>>>> That said, I see some things with your configuration.
>>>>>>
>>>>>> - you need this in httpd.conf:
>>>>>>
>>>>>> AddModule mod_jk.c (if you're using JK)
>>>>>>
>>>>>> - you need a much simpler workers.properties file...dump ALL of
>>>>>> that JNI stuff. Workers.properties shouldn't be more than this:
>>>>>>
>>>>>> # BEGIN workers.properties
>>>>>> worker.list=ajp13
>>>>>> worker.ajp13.port=8009
>>>>>> worker.ajp13.host=localhost (or IP of Tomcat server)
>>>>>> worker.ajp13.type=ajp13
>>>>>> # END workers.properties
>>>>>> - you need an additional Listener element in server.xml for EACH
>>>>>> Host container...either you are missing it or you didn't post
>>>>>> it. This is all described in my HOWTO.
>>>>>>
>>>>>> Your auto-generated mod_jk.conf file should look VERY similar to
>>>>>> this:
>>>>>> http://www.johnturner.com/howto/mod_jk_conf.html
>>>>>>
>>>>>> If it doesn't, go back and look at your server.xml and make sure
>>>>>> your ApacheConfig Listeners are correct.
>>>>>>
>>>>>> John
>>>>>>
>>>>>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin <emerson@tre-
>>>>>> sc.gov.br> wrote:
>>>>>>
>>>>>>> It has 4 days since i'm trying to get apache 1.3 to talk to
>>>>>>> tomcat 4.1.24 through jk or jk2.
>>>>>>> At first some questions that i haven't seem in my long search :
>>>>>>>
>>>>>>> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
>>>>>>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>>>>>>> compability with other php apps. I'd like to use the autoconf
>>>>>>> and remote deploy feature of tomcat 4.1 (that's why i'm
>>>>>>> upgrading my 3.2.3 production server, which works fine for jk)
>>>>>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat
>>>>>>> 4.1.24). I read about jk2 is better for apache 2.0, is it true?
>>>>>>> - If does, i think i have made some mistake, because it's not
>>>>>>> working :)
>>>>>>>
>>>>>>> My conf :
>>>>>>>
>>>>>>> ------------------------------------------------------------------------
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------
>>>>>>> http.conf (lines added):
>>>>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>>>>> Include
>>>>>>> /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>>>>
>>>>>>> ------------------------------------------------------------------------
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------
>>>>>>> server.xml
>>>>>>>
>>>>>>> under "<Server port=..." i put (it's attached for better
>>>>>>> undertanding) :
>>>>>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>>>>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>>>>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>>>>>> jdk14/conf/jk/workers.properties"
>>>>>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>>>>>> ------------------------------------------------------------------------
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------
>>>>>>> worker.properties configuration file (it's at
>>>>>>> /opt/local/jakarta-
>>>>>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>>>>>
>>>>>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>>>>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>>>>>> ps=/
>>>>>>>
>>>>>>> worker.list=ajp13
>>>>>>> worker.ajp13.port=8009
>>>>>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>>>>>> worker.ajp13.type=ajp13
>>>>>>> worker.ajp13.lbfactor=1
>>>>>>>
>>>>>>> worker.loadbalancer.type=lb
>>>>>>> worker.loadbalancer.balanced_workers=ajp13
>>>>>>> worker.inprocess.type=jni
>>>>>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>>>>>> tomcat.jar
>>>>>>> worker.inprocess.cmd_line=start
>>>>>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>>>>>> classic$(ps)libjvm.so
>>>>>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>>>> inprocess.stdout
>>>>>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>>>> inprocess.stderr
>>>>>>>
>>>>>>> ------------------------------------------------------------------------
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------
>>>>>>>
>>>>>>> here goes what happens :
>>>>>>>
>>>>>>> start tomcat, all ok.
>>>>>>>
>>>>>>> start apache, it says ok but in the log appears :
>>>>>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory:
>>>>>>> Error while opening the workers, jk will not work
>>>>>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory:
>>>>>>> Error while opening the workers, jk will not work
>>>>>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>>>>>> configured -- resuming normal operations
>>>>>>>
>>>>>>> is it necessary to do some other specific configuration?
>>>>>>> I tried jk2 before this, but it didn't work too :(
>>>>>>> I saw a lot of tutorials about jk and jk2, but all of them are
>>>>>>> either confuse or don't use autoconf
>>>>>>>
>>>>>>> Any clue would help
>>>>>>>
>>>>>>> Thanks in advance
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> ########## Auto generated on Tue May 13 15:03:31 BRT 2003##########
>>>
>>> <IfModule !mod_jk.c>
>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>> </IfModule>
>>>
>>> JkWorkersFile
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>>>
>>> JkLogFile
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>>>
>>>
>>> JkLogLevel debug
>>>
>>>
>>>
>>> <VirtualHost localhost>
>>> ServerName localhost
>>>
>>> #################### localhost:/admin ####################
>>>
>>> # Static files Alias /admin
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin"
>>>
>>>
>>> <Directory
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin">
>>>
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/admin/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/admin/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /admin/j_security_check ajp13
>>> JkMount /admin/*.do ajp13
>>> JkMount /admin/*.jsp ajp13
>>>
>>> #################### localhost:/webdav ####################
>>>
>>> # Static files Alias /webdav
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav"
>>>
>>> <Directory
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav">
>>>
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.jsp index.html index.htm </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/webdav/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/webdav/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /webdav/*.jsp ajp13
>>>
>>> #################### localhost:/examples ####################
>>>
>>> # Static files Alias /examples
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples"
>>>
>>>
>>> <Directory
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples">
>>>
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/examples/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/examples/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /examples/jsp/security/protected/j_security_check ajp13
>>> JkMount /examples/snoop ajp13
>>> JkMount /examples/servlet/* ajp13
>>> JkMount /examples/CompressionTest ajp13
>>> JkMount /examples/*.jsp ajp13
>>> JkMount /examples/servletToJsp ajp13
>>> JkMount /examples/SendMailServlet ajp13
>>>
>>> #################### localhost:/tomcat-docs ####################
>>>
>>> # Static files Alias /tomcat-docs
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs"
>>>
>>>
>>> <Directory
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs">
>>>
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/tomcat-docs/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/tomcat-docs/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /tomcat-docs/*.jsp ajp13
>>>
>>> #################### localhost:/manager ####################
>>>
>>> # Static files Alias /manager
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager"
>>>
>>>
>>> <Directory
>>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager">
>>>
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/manager/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/manager/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /manager/list ajp13
>>> JkMount /manager/serverinfo ajp13
>>> JkMount /manager/deploy ajp13
>>> JkMount /manager/sessions ajp13
>>> JkMount /manager/reload ajp13
>>> JkMount /manager/html/* ajp13
>>> JkMount /manager/resources ajp13
>>> JkMount /manager/start ajp13
>>> JkMount /manager/stop ajp13
>>> JkMount /manager/install ajp13
>>> JkMount /manager/*.jsp ajp13
>>> JkMount /manager/roles ajp13
>>> JkMount /manager/remove ajp13
>>> JkMount /manager/undeploy ajp13
>>> </VirtualHost>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> worker.list=ajp13
>>> worker.ajp13.port=8009
>>> worker.ajp13.host=localhost
>>> worker.ajp13.type=ajp13
>>> worker.ajp13.lbfactor=1
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (172)]: Into
>>> jk_uri_worker_map_t::uri_worker_map_alloc
>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (375)]: Into
>>> jk_uri_worker_map_t::uri_worker_map_open
>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (396)]:
>>> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (422)]:
>>> jk_uri_worker_map_t::uri_worker_map_open, done
>>> [Tue May 13 15:04:37 2003] [jk_worker.c (88)]: Into wc_open
>>> [Tue May 13 15:04:37 2003] [jk_worker.c (222)]: Into
>>> build_worker_map, creating 1 workers
>>> [Tue May 13 15:04:37 2003] [jk_worker.c (228)]: build_worker_map,
>>> creating worker ajp13
>>> [Tue May 13 15:04:37 2003] [jk_worker.c (148)]: Into wc_create_worker
>>> [Tue May 13 15:04:37 2003] [jk_worker.c (162)]: wc_create_worker,
>>> about to create instance ajp13 of ajp13
>>> [Tue May 13 15:04:37 2003] [jk_ajp13_worker.c (108)]: Into
>>> ajp13_worker_factory
>>> [Tue May 13 15:04:37 2003] [jk_worker.c (171)]: wc_create_worker,
>>> about to validate and init ajp13
>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1219)]: Into
>>> jk_worker_t::validate
>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1239)]: In
>>> jk_worker_t::validate for worker ajp13 contact is localhost:8009
>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1267)]: Into
>>> jk_worker_t::init
>>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1287)]: In
>>> jk_worker_t::init, setting socket timeout to 0
>>> [Tue May 13 15:04:37 2003] [jk_worker.c (187)]: wc_create_worker, done
>>> [Tue May 13 15:04:37 2003] [jk_worker.c (238)]: build_worker_map,
>>> removing old ajp13 worker [Tue May 13 15:04:37 2003] [jk_worker.c
>>> (250)]: build_worker_map, done
>>> [Tue May 13 15:04:37 2003] [jk_worker.c (111)]: wc_open, done 1
>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (172)]: Into
>>> jk_uri_worker_map_t::uri_worker_map_alloc
>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (375)]: Into
>>> jk_uri_worker_map_t::uri_worker_map_open
>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (396)]:
>>> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (422)]:
>>> jk_uri_worker_map_t::uri_worker_map_open, done
>>> [Tue May 13 15:04:38 2003] [jk_worker.c (88)]: Into wc_open
>>> [Tue May 13 15:04:38 2003] [jk_worker.c (222)]: Into
>>> build_worker_map, creating 1 workers
>>> [Tue May 13 15:04:38 2003] [jk_worker.c (228)]: build_worker_map,
>>> creating worker ajp13
>>> [Tue May 13 15:04:38 2003] [jk_worker.c (148)]: Into wc_create_worker
>>> [Tue May 13 15:04:38 2003] [jk_worker.c (162)]: wc_create_worker,
>>> about to create instance ajp13 of ajp13
>>> [Tue May 13 15:04:38 2003] [jk_ajp13_worker.c (108)]: Into
>>> ajp13_worker_factory
>>> [Tue May 13 15:04:38 2003] [jk_worker.c (171)]: wc_create_worker,
>>> about to validate and init ajp13
>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1219)]: Into
>>> jk_worker_t::validate
>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1239)]: In
>>> jk_worker_t::validate for worker ajp13 contact is localhost:8009
>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1267)]: Into
>>> jk_worker_t::init
>>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1287)]: In
>>> jk_worker_t::init, setting socket timeout to 0
>>> [Tue May 13 15:04:38 2003] [jk_worker.c (187)]: wc_create_worker, done
>>> [Tue May 13 15:04:38 2003] [jk_worker.c (238)]: build_worker_map,
>>> removing old ajp13 worker [Tue May 13 15:04:38 2003] [jk_worker.c
>>> (250)]: build_worker_map, done
>>> [Tue May 13 15:04:38 2003] [jk_worker.c (111)]: wc_open, done 1
>>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (460)]: Into
>>> jk_uri_worker_map_t::map_uri_to_worker
>>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (477)]: Attempting
>>> to map URI '/examples/servlet/HelloWorldExample'
>>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (599)]:
>>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> ##
>>> ## httpd.conf -- Apache HTTP server configuration file
>>> ##
>>>
>>> #
>>> # Based upon the NCSA server configuration files originally by Rob
>>> McCool.
>>> #
>>> # This is the main Apache server configuration file. It contains the
>>> # configuration directives that give the server its instructions.
>>> # See <URL:http://www.apache.org/docs/> for detailed information about
>>> # the directives.
>>> #
>>> # Do NOT simply read the instructions in here without understanding
>>> # what they do. They're here only as hints or reminders. If you
>>> are unsure
>>> # consult the online docs. You have been warned. #
>>> # After this file is processed, the server will look for and process
>>> # /srv/www/conf/srm.conf and then /srv/www/conf/access.conf
>>> # unless you have overridden these with ResourceConfig and/or
>>> # AccessConfig directives here.
>>> #
>>> # The configuration directives are grouped into three basic sections:
>>> # 1. Directives that control the operation of the Apache server
>>> process as a
>>> # whole (the 'global environment').
>>> # 2. Directives that define the parameters of the 'main' or
>>> 'default' server,
>>> # which responds to requests that aren't handled by a virtual host.
>>> # These directives also provide default values for the settings
>>> # of all virtual hosts.
>>> # 3. Settings for virtual hosts, which allow Web requests to be
>>> sent to
>>> # different IP addresses or hostnames and have them handled by the
>>> # same Apache server process.
>>> #
>>> # Configuration and logfile names: If the filenames you specify for
>>> many
>>> # of the server's control files begin with "/" (or "drive:/" for
>>> Win32), the
>>> # server will use that explicit path. If the filenames do *not* begin
>>> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
>>> # with ServerRoot set to "/usr/local/apache" will be interpreted by the
>>> # server as "/usr/local/apache/logs/foo.log".
>>> #
>>>
>>> ### Section 1: Global Environment
>>> #
>>> # The directives in this section affect the overall operation of
>>> Apache,
>>> # such as the number of concurrent requests it can handle or where it
>>> # can find its configuration files.
>>> #
>>>
>>> #
>>> # ServerType is either inetd, or standalone. Inetd mode is only
>>> supported on
>>> # Unix platforms.
>>> #
>>> ServerType standalone
>>>
>>> #
>>> # ServerRoot: The top of the directory tree under which the server's
>>> # configuration, error, and log files are kept.
>>> #
>>> # NOTE! If you intend to place this on an NFS (or otherwise network)
>>> # mounted filesystem then please read the LockFile documentation
>>> # (available at
>>> <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
>>> # you will save yourself a lot of trouble.
>>> #
>>> ServerRoot "/srv/www"
>>>
>>> #
>>> # The LockFile directive sets the path to the lockfile used when Apache
>>> # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
>>> # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be
>>> left at
>>> # its default value. The main reason for changing it is if the logs
>>> # directory is NFS mounted, since the lockfile MUST BE STORED ON A
>>> LOCAL
>>> # DISK. The PID of the main server process is automatically appended to
>>> # the filename. #
>>> LockFile /var/lock/subsys/httpd/httpd.accept.lock
>>>
>>> #
>>> # PidFile: The file in which the server should record its process
>>> # identification number when it starts.
>>> #
>>> PidFile /var/run/httpd.pid
>>>
>>> #
>>> # ScoreBoardFile: File used to store internal server process
>>> information.
>>> # Not all architectures require this. But if yours does (you'll
>>> know because
>>> # this file will be created when you run Apache) then you *must*
>>> ensure that
>>> # no two invocations of Apache share the same scoreboard file.
>>> #
>>> ScoreBoardFile /var/run/httpd.scoreboard
>>>
>>> #
>>> # In the standard configuration, the server will process httpd.conf
>>> (this # file, specified by the -f command line option), srm.conf,
>>> and access.conf # in that order. The latter two files are now
>>> distributed empty, as it is # recommended that all directives be
>>> kept in a single file for simplicity. # The commented-out values
>>> below are the built-in defaults. You can have the # server ignore
>>> these files altogether by using "/dev/null" (for Unix) or
>>> # "nul" (for Win32) for the arguments to the directives.
>>> #
>>> #ResourceConfig conf/srm.conf
>>> #AccessConfig conf/access.conf
>>>
>>> #
>>> # Timeout: The number of seconds before receives and sends time out.
>>> #
>>> Timeout 300
>>>
>>> #
>>> # KeepAlive: Whether or not to allow persistent connections (more than
>>> # one request per connection). Set to "Off" to deactivate.
>>> #
>>> KeepAlive On
>>>
>>> #
>>> # MaxKeepAliveRequests: The maximum number of requests to allow
>>> # during a persistent connection. Set to 0 to allow an unlimited
>>> amount.
>>> # We recommend you leave this number high, for maximum performance.
>>> #
>>> MaxKeepAliveRequests 100
>>>
>>> #
>>> # KeepAliveTimeout: Number of seconds to wait for the next request
>>> from the
>>> # same client on the same connection.
>>> #
>>> KeepAliveTimeout 15
>>>
>>> #
>>> # Server-pool size regulation. Rather than making you guess how many
>>> # server processes you need, Apache dynamically adapts to the load it
>>> # sees --- that is, it tries to maintain enough server processes to
>>> # handle the current load, plus a few spare servers to handle transient
>>> # load spikes (e.g., multiple simultaneous requests from a single
>>> # Netscape browser).
>>> #
>>> # It does this by periodically checking how many servers are waiting
>>> # for a request. If there are fewer than MinSpareServers, it creates
>>> # a new spare. If there are more than MaxSpareServers, some of the
>>> # spares die off. The default values are probably OK for most sites.
>>> #
>>>
>>> # Note: these two values are set by SuSEconfig according to the
>>> setting of the
>>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache!
>>> MinSpareServers 1
>>> MaxSpareServers 1
>>>
>>> #
>>> # Number of servers to start initially --- should be a reasonable
>>> ballpark
>>> # figure.
>>> #
>>>
>>> # Note: this value is set by SuSEconfig according to the setting of the
>>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! StartServers 1
>>>
>>> #
>>> # Limit on total number of servers running, i.e., limit on the number
>>> # of clients who can simultaneously connect --- if this limit is ever
>>> # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
>>> # It is intended mainly as a brake to keep a runaway server from taking
>>> # the system with it as it spirals down...
>>> #
>>>
>>> # Note: this value is set by SuSEconfig according to the setting of the
>>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! MaxClients 150
>>>
>>> #
>>> # MaxRequestsPerChild: the number of requests each child process is
>>> # allowed to process before the child dies. The child will exit so
>>> # as to avoid problems after prolonged use when Apache (and maybe the
>>> # libraries it uses) leak memory or other resources. On most
>>> systems, this
>>> # isn't really needed, but a few (such as Solaris) do have notable
>>> leaks
>>> # in the libraries. For these platforms, set to something like 10000
>>> # or so; a setting of 0 means unlimited.
>>> #
>>> # NOTE: This value does not include keepalive requests after the
>>> initial
>>> # request per connection. For example, if a child process handles
>>> # an initial request and 10 subsequent "keptalive" requests, it
>>> # would only count as 1 request towards this limit.
>>> #
>>> MaxRequestsPerChild 0
>>>
>>> #
>>> # Listen: Allows you to bind Apache to specific IP addresses and/or
>>> # ports, in addition to the default. See also the <VirtualHost>
>>> # directive.
>>> #
>>> #Listen 3000
>>> #Listen 12.34.56.78:80
>>>
>>> #
>>> # BindAddress: You can support virtual hosts with this option. This
>>> directive
>>> # is used to tell the server which IP address to listen to. It can
>>> either
>>> # contain "*", an IP address, or a fully qualified Internet domain
>>> name.
>>> # See also the <VirtualHost> and Listen directives.
>>> #
>>> #BindAddress *
>>>
>>> #
>>> # Dynamic Shared Object (DSO) Support
>>> #
>>> # To be able to use the functionality of a module which was built as
>>> a DSO you
>>> # have to place corresponding `LoadModule' lines at this location so
>>> the
>>> # directives contained in it are actually available _before_ they
>>> are used.
>>> # Please read the file http://httpd.apache.org/docs/dso.html for more
>>> # details about the DSO mechanism and run `httpd -l' for the list of
>>> already
>>> # built-in (statically linked and thus always available) modules in
>>> your httpd
>>> # binary.
>>> #
>>> # Note: The order in which modules are loaded is important. Don't
>>> change
>>> # the order below without expert advice.
>>>
>>> # Note:
>>> #
>>> # The file that is included after the LoadModule statements is
>>> generated # by SuSEconfig according to #
>>> # 1) which modules (ones not included with apache) are installed
>>> # 2) the settings in /etc/sysconfig/apache
>>> # # SuSEconfig uses the /etc/httpd/modules/* files that come with
>>> each module # to determine the necessary directives. # # Apache no
>>> longer needs to be started with '-D <modules>' switches (with # the
>>> exception of mod_ssl, which has a lot of conditional statements).
>>>
>>> # Example:
>>> # LoadModule foo_module libexec/mod_foo.so
>>> LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
>>> LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
>>> LoadModule env_module /usr/lib/apache/mod_env.so
>>> LoadModule define_module /usr/lib/apache/mod_define.so
>>> LoadModule config_log_module /usr/lib/apache/mod_log_config.so
>>> LoadModule agent_log_module /usr/lib/apache/mod_log_agent.so
>>> LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
>>> LoadModule mime_magic_module /usr/lib/apache/mod_mime_magic.so
>>> LoadModule mime_module /usr/lib/apache/mod_mime.so
>>> LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
>>> LoadModule status_module /usr/lib/apache/mod_status.so
>>> LoadModule info_module /usr/lib/apache/mod_info.so
>>> LoadModule includes_module /usr/lib/apache/mod_include.so
>>> LoadModule autoindex_module /usr/lib/apache/mod_autoindex.so
>>> LoadModule dir_module /usr/lib/apache/mod_dir.so
>>> LoadModule cgi_module /usr/lib/apache/mod_cgi.so
>>> LoadModule asis_module /usr/lib/apache/mod_asis.so
>>> LoadModule imap_module /usr/lib/apache/mod_imap.so
>>> LoadModule action_module /usr/lib/apache/mod_actions.so
>>> LoadModule speling_module /usr/lib/apache/mod_speling.so
>>> # mod_userdir will be included below by SuSEconfig if
>>> HTTPD_SEC_PUBLIC_HTML=yes
>>> LoadModule alias_module /usr/lib/apache/mod_alias.so
>>> LoadModule rewrite_module /usr/lib/apache/mod_rewrite.so
>>> LoadModule access_module /usr/lib/apache/mod_access.so
>>> LoadModule auth_module /usr/lib/apache/mod_auth.so
>>> LoadModule anon_auth_module /usr/lib/apache/mod_auth_anon.so
>>> LoadModule dbm_auth_module /usr/lib/apache/mod_auth_dbm.so
>>> LoadModule db_auth_module /usr/lib/apache/mod_auth_db.so
>>> LoadModule digest_module /usr/lib/apache/mod_digest.so
>>> LoadModule proxy_module /usr/lib/apache/libproxy.so
>>> LoadModule cern_meta_module /usr/lib/apache/mod_cern_meta.so
>>> LoadModule expires_module /usr/lib/apache/mod_expires.so
>>> LoadModule headers_module /usr/lib/apache/mod_headers.so
>>> LoadModule usertrack_module /usr/lib/apache/mod_usertrack.so
>>> LoadModule unique_id_module /usr/lib/apache/mod_unique_id.so
>>> LoadModule setenvif_module /usr/lib/apache/mod_setenvif.so
>>> <IfDefine DUMMYSSL>
>>> LoadModule ssl_module /usr/lib/apache/libssl.so
>>> </IfDefine>
>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>
>>>
>>>
>>> Include /etc/httpd/suse_loadmodule.conf
>>>
>>>
>>> # Reconstruction of the complete module list from all available
>>> modules
>>> # (static and shared ones) to achieve correct module execution order.
>>> # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
>>> ClearModuleList
>>> AddModule mod_mmap_static.c
>>> AddModule mod_vhost_alias.c
>>> AddModule mod_env.c
>>> AddModule mod_define.c
>>> AddModule mod_log_config.c
>>> AddModule mod_log_agent.c
>>> AddModule mod_log_referer.c
>>> AddModule mod_mime_magic.c
>>> AddModule mod_mime.c
>>> AddModule mod_negotiation.c
>>> AddModule mod_status.c
>>> AddModule mod_info.c
>>> AddModule mod_include.c
>>> AddModule mod_autoindex.c
>>> AddModule mod_dir.c
>>> AddModule mod_cgi.c
>>> AddModule mod_asis.c
>>> AddModule mod_imap.c
>>> AddModule mod_actions.c
>>> AddModule mod_speling.c
>>> # mod_userdir will be included below by SuSEconfig if
>>> HTTPD_SEC_PUBLIC_HTML=yes
>>> AddModule mod_alias.c
>>> AddModule mod_rewrite.c
>>> AddModule mod_access.c
>>> AddModule mod_auth.c
>>> AddModule mod_auth_anon.c
>>> AddModule mod_auth_dbm.c
>>> AddModule mod_auth_db.c
>>> AddModule mod_digest.c
>>> AddModule mod_proxy.c
>>> AddModule mod_cern_meta.c
>>> AddModule mod_expires.c
>>> AddModule mod_headers.c
>>> AddModule mod_usertrack.c
>>> AddModule mod_unique_id.c
>>> AddModule mod_so.c
>>> AddModule mod_setenvif.c
>>> <IfDefine DUMMYSSL>
>>> AddModule mod_ssl.c
>>> </IfDefine>
>>>
>>> AddModule mod_jk.c
>>>
>>>
>>>
>>> # Again, the following file is generated by SuSEconfig for modules
>>> that actually
>>> # have been installed
>>>
>>> Include /etc/httpd/suse_addmodule.conf
>>>
>>>
>>> #
>>> # ExtendedStatus controls whether Apache will generate "full" status
>>> # information (ExtendedStatus On) or just basic information
>>> (ExtendedStatus
>>> # Off) when the "server-status" handler is called. The default is Off.
>>> #
>>> ExtendedStatus On
>>>
>>>
>>> #
>>> # To enable mod_dav, add the following directive to the appropriate
>>> # container(s) in the httpd.conf file:
>>> #
>>> <IfModule mod_dav.c>
>>> DavLockDB /var/lock/DAVLock
>>> </IfModule>
>>>
>>>
>>> #
>>> #
>>> # enable the SSI (Server Side Includes) execution for +x files
>>> #
>>> <IfModule mod_include.c>
>>> XBitHack on
>>> </IfModule>
>>>
>>>
>>> ### Section 2: 'Main' server configuration
>>> #
>>> # The directives in this section set up the values used by the 'main'
>>> # server, which responds to any requests that aren't handled by a
>>> # <VirtualHost> definition. These values also provide defaults for
>>> # any <VirtualHost> containers you may define later in the file.
>>> #
>>> # All of these directives may appear inside <VirtualHost> containers,
>>> # in which case these default settings will be overridden for the
>>> # virtual host being defined.
>>> #
>>>
>>> #
>>> # If your ServerType directive (set earlier in the 'Global Environment'
>>> # section) is set to "inetd", the next few directives don't have any
>>> # effect since their settings are defined by the inetd configuration.
>>> # Skip ahead to the ServerAdmin directive.
>>> #
>>>
>>> #
>>> # Port: The port to which the standalone server listens. For
>>> # ports < 1023, you will need httpd to be run as root initially.
>>> #
>>> Port 80
>>>
>>> ##
>>> ## SSL Support
>>> ##
>>> ## When we also provide SSL we have to listen to the ## standard
>>> HTTP port (see above) and to the HTTPS port
>>> ##
>>> <IfDefine SSL>
>>> Listen 80
>>> Listen 443
>>> </IfDefine>
>>>
>>> #
>>> # If you wish httpd to run as a different user or group, you must run
>>> # httpd as root initially and it will switch. #
>>> # User/Group: The name (or #number) of the user/group to run httpd as.
>>> # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
>>> # . On HPUX you may not be able to use shared memory as nobody, and
>>> the
>>> # suggested workaround is to create a user www and use that user.
>>> # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
>>> # when the value of (unsigned)Group is above 60000; # don't use
>>> Group nogroup on these systems!
>>> #
>>> User wwwrun
>>> Group nogroup
>>>
>>> #
>>> # ServerAdmin: Your address, where problems with the server should be
>>> # e-mailed. This address appears on some server-generated pages, such
>>> # as error documents.
>>> #
>>>
>>> # Note: this email address is set by SuSEconfig according to the
>>> setting of the
>>> # HTTPD_SEC_SERVERADMIN variable in /etc/sysconfig/apache!
>>> ServerAdmin webmaster@elbassan.tre-sc.gov.br
>>>
>>> #
>>> # ServerName allows you to set a host name which is sent back to
>>> clients for
>>> # your server if it's different than the one the program would get
>>> (i.e., use
>>> # "www" instead of the host's real name).
>>> #
>>> # Note: You cannot just invent host names and hope they work. The
>>> name you # define here must be a valid DNS name for your host. If
>>> you don't understand
>>> # this, ask your network administrator.
>>> # If your host doesn't have a registered DNS name, enter its IP
>>> address here.
>>> # You will have to access it by its address (e.g.,
>>> http://123.45.67.89/)
>>> # anyway, and this will make redirections work in a sensible way.
>>> #
>>> # 127.0.0.1 is the TCP/IP local loop-back address, often named
>>> localhost. Your # machine always knows itself by this address. If
>>> you use Apache strictly for # local testing and development, you may
>>> use 127.0.0.1 as the server name.
>>> #
>>>
>>> # Note: the host name is set by SuSEconfig according to the setting
>>> of the
>>> # FQHOSTNAME variable in /etc/sysconfig/network/config!
>>> ServerName elbassan.tre-sc.gov.br
>>>
>>> #
>>> # DocumentRoot: The directory out of which you will serve your
>>> # documents. By default, all requests are taken from this directory,
>>> but
>>> # symbolic links and aliases may be used to point to other locations.
>>> #
>>> DocumentRoot "/srv/www/htdocs"
>>>
>>> #
>>> # Each directory to which Apache has access, can be configured with
>>> respect
>>> # to which services and features are allowed and/or disabled in that
>>> # directory (and its subdirectories). #
>>> # First, we configure the "default" to be a very restrictive set of
>>> # permissions. #
>>> <Directory />
>>> AuthUserFile /etc/httpd/passwd
>>> AuthGroupFile /etc/httpd/group
>>>
>>> Options -FollowSymLinks +Multiviews
>>> AllowOverride None
>>>
>>> </Directory>
>>>
>>>
>>> #
>>> # Note that from this point forward you must specifically allow
>>> # particular features to be enabled - so if something's not working as
>>> # you might expect, make sure that you have specifically enabled it
>>> # below.
>>> #
>>>
>>> #
>>> # This should be changed to whatever you set DocumentRoot to.
>>> #
>>> <Directory "/srv/www/htdocs">
>>>
>>> #
>>> # This may also be "None", "All", or any combination of "Indexes",
>>> # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
>>> #
>>> # Note that "MultiViews" must be named *explicitly* --- "Options All"
>>> # doesn't give it to you.
>>> #
>>> Options Indexes -FollowSymLinks +Includes MultiViews
>>>
>>> #
>>> # This controls which options the .htaccess files in directories can
>>> # override. Can also be "All", or any combination of "Options",
>>> "FileInfo", # "AuthConfig", and "Limit"
>>> #
>>> AllowOverride None
>>>
>>> #
>>> # Controls who can get stuff from this server.
>>> #
>>> Order allow,deny
>>> Allow from all
>>>
>>>
>>> #
>>> # disable WebDAV by default for security reasons. #
>>> <IfModule mod_dav.c>
>>> DAV Off
>>> </IfModule>
>>>
>>> #
>>> # Enable SSI (Server Side Includes) for the demo index.html pages,
>>> as some of the content
>>> # is created dynamically. This should be disabled when setting up a
>>> productive
>>> # server.
>>> <Files /srv/www/htdocs/index.htm*>
>>> Options -FollowSymLinks +Includes +MultiViews
>>> </Files>
>>>
>>> #
>>> # Protect the php3 test page, so it cannot be viewed from an outside
>>> system. #
>>> <Files test.php3>
>>> Order deny,allow
>>> deny from all
>>> allow from localhost
>>> </Files>
>>>
>>> </Directory>
>>>
>>> #
>>> # UserDir: The name of the directory which is appended onto a user's
>>> home
>>> # directory if a ~user request is received.
>>>
>>> # Note: # The next three lines are commented out here. These
>>> directives and the access # control section have been put into
>>> /etc/httpd/suse_public_html.conf. # If the variable
>>> HTTPD_SEC_PUBLIC_HTML in /etc/sysconfig/apache # is set to "yes"
>>> (default), SuSEconfig will include that file via #
>>> /etc/httpd/suse_include.conf. # Also note that for the
>>> /home/*/public_html directories to be browsable the # executable
>>> flag must be set on the /home/* directories.
>>> #
>>> # <IfModule mod_userdir.c>
>>> # UserDir public_html
>>> # </IfModule>
>>>
>>> #
>>> # Control access to UserDir directories. The following is an example
>>> # for a site where these directories are restricted to read-only.
>>> #
>>> #<Directory /home/*/public_html>
>>> # AllowOverride FileInfo AuthConfig Limit
>>> # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
>>> # <Limit GET POST OPTIONS PROPFIND>
>>> # Order allow,deny
>>> # Allow from all
>>> # </Limit>
>>> # <LimitExcept GET POST OPTIONS PROPFIND>
>>> # Order deny,allow
>>> # Deny from all
>>> # </LimitExcept>
>>> #</Directory>
>>>
>>> #
>>> # DirectoryIndex: Name of the file or files to use as a pre-written
>>> HTML
>>> # directory index. Separate multiple entries with spaces.
>>> #
>>> <IfModule mod_dir.c>
>>> DirectoryIndex index.html
>>> </IfModule>
>>>
>>> #
>>> # AccessFileName: The name of the file to look for in each directory
>>> # for access control information.
>>> #
>>> AccessFileName .htaccess
>>>
>>> #
>>> # The following lines prevent .htaccess files from being viewed by
>>> # Web clients. Since .htaccess files often contain authorization
>>> # information, access is disallowed for security reasons. Comment
>>> # these lines out if you want Web visitors to see the contents of
>>> # .htaccess files. If you change the AccessFileName directive above,
>>> # be sure to make the corresponding changes here.
>>> #
>>> # Also, folks tend to use names such as .htpasswd for password
>>> # files, so this will protect those as well.
>>> #
>>> <Files ~ "^\.ht">
>>> Order allow,deny
>>> Deny from all
>>> Satisfy All
>>> </Files>
>>>
>>> #
>>> # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
>>> with each
>>> # document that was negotiated on the basis of content. This asks proxy
>>> # servers not to cache the document. Uncommenting the following line
>>> disables
>>> # this behavior, and proxies will be allowed to cache the documents.
>>> #
>>> #CacheNegotiatedDocs
>>>
>>> #
>>> # UseCanonicalName: (new for 1.3) With this setting turned on,
>>> whenever
>>> # Apache needs to construct a self-referencing URL (a URL that
>>> refers back
>>> # to the server the response is coming from) it will use ServerName and
>>> # Port to form a "canonical" name. With this setting off, Apache will
>>> # use the hostname:port that the client supplied, when possible. This
>>> # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
>>> #
>>> UseCanonicalName On
>>>
>>> #
>>> # TypesConfig describes where the mime.types file (or equivalent) is
>>> # to be found.
>>> #
>>> <IfModule mod_mime.c>
>>> TypesConfig /etc/httpd/mime.types
>>> </IfModule>
>>>
>>> #
>>> # DefaultType is the default MIME type the server will use for a
>>> document
>>> # if it cannot otherwise determine one, such as from filename
>>> extensions.
>>> # If your server contains mostly text or HTML documents,
>>> "text/plain" is
>>> # a good value. If most of your content is binary, such as
>>> applications
>>> # or images, you may want to use "application/octet-stream" instead to
>>> # keep browsers from trying to display binary files as though they are
>>> # text.
>>> #
>>> DefaultType text/plain
>>>
>>> #
>>> # The mod_mime_magic module allows the server to use various hints
>>> from the
>>> # contents of the file itself to determine its type. The MIMEMagicFile
>>> # directive tells the module where the hint definitions are located.
>>> # mod_mime_magic is not part of the default server (you have to add
>>> # it yourself with a LoadModule [see the DSO paragraph in the 'Global
>>> # Environment' section], or recompile the server and include
>>> mod_mime_magic
>>> # as part of the configuration), so it's enclosed in an <IfModule>
>>> container.
>>> # This means that the MIMEMagicFile directive will only be processed
>>> if the
>>> # module is part of the server.
>>> #
>>> <IfModule mod_mime_magic.c>
>>> MIMEMagicFile /etc/httpd/magic
>>> </IfModule>
>>>
>>> #
>>> # HostnameLookups: Log the names of clients or just their IP addresses
>>> # e.g., www.apache.org (on) or 204.62.129.132 (off).
>>> # The default is off because it'd be overall better for the net if
>>> people
>>> # had to knowingly turn this feature on, since enabling it means that
>>> # each client request will result in AT LEAST one lookup request to the
>>> # nameserver.
>>> #
>>> HostnameLookups Off
>>>
>>>
>>> # The following are the directives necessary to get mod_backhand
>>> operational.
>>> # You will need to add Backhand directives to any directories that
>>> you wish
>>> # to balance.. For example, you could put the following inside a
>>> # ScriptAliased /cgi-cpu/ directory (for scripts that are cpu hogs)
>>>
>>> # <Directory ...>
>>> # ... stuff ...
>>> # Backhand byAge
>>> # Backhand byRandom
>>> # Backhand byLogWindow
>>> # Backhand byCPU
>>> # ... stuff ...
>>> # </Directory>
>>>
>>> # This will eliminate servers you haven't heard from for a while
>>> # Then randomize those remaining
>>> # Then take the first log(n) (log base 2 of course)
>>> # Then use the one with the highest CPU idle time
>>>
>>> <IfModule mod_backhand.c>
>>> # UnixSocketDir is were the mod_backhand-Arriba file is stored
>>> # (how fast your machine is). This directory must be readable and
>>> writable
>>> # by euid of apache (wwwrun) because the children have dropped
>>> privileges
>>> # before they connect to a UNIX domain socket in this directory.
>>> # This directive is singular.
>>> #
>>> # MulticastStats of the form [<IP ADDR>] <BROADCAST ADDR>:<PORT>
>>> will set
>>> # mod_backhand to broadcast server statistics on that address
>>> advertising
>>> # for a server on <IP ADDR> or gethostbyname(gethostname())
>>> # MulticastStats of the form [<IP ADDR>] <MULTICAST
>>> ADDR>:<PORT>,<ttl> will
>>> # set mod_backhand to multicast server statistics on that address
>>> # advertising for a server on <IP ADDR> or
>>> gethostbyname(gethostname())
>>> # This directive is singular.
>>> #
>>> # AcceptStats <a.b.c.d>[/<mask>] (like 10.0.0.4 or 10.0.0.0/24) will
>>> accept
>>> # statistics originating from that IP or IP network.
>>> # This option can be cascaded.
>>>
>>> UnixSocketDir /var/lib/backhand
>>> # MulticastStats 128.220.221.255:4445
>>> # MulticastStats 225.220.221.20:4445,1
>>> # AcceptStats 128.220.221.0/24
>>>
>>> # Note that you _must_ configure the MulticastStats/AcceptStats
>>> directives, # otherwise apache will segfault!
>>>
>>> # This is a status of sorts. Visit it and see how valuable it is to
>>> you.
>>> <Location "/backhand/">
>>> SetHandler backhand-handler
>>> </Location>
>>> </IfModule>
>>>
>>>
>>> #
>>> # ErrorLog: The location of the error log file.
>>> # If you do not specify an ErrorLog directive within a <VirtualHost>
>>> # container, error messages relating to that virtual host will be
>>> # logged here. If you *do* define an error logfile for a <VirtualHost>
>>> # container, that host's errors will be logged there and not here.
>>> #
>>> ErrorLog /var/log/httpd/error_log
>>>
>>> #
>>> # LogLevel: Control the number of messages logged to the error_log.
>>> # Possible values include: debug, info, notice, warn, error, crit,
>>> # alert, emerg.
>>> #
>>> LogLevel warn
>>>
>>> #
>>> # The following directives define some format nicknames for use with
>>> # a CustomLog directive (see below).
>>> #
>>> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
>>> \"%{User-Agent}i\"" combined
>>> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>>> LogFormat "%{Referer}i -> %U" referer
>>> LogFormat "%{User-agent}i" agent
>>>
>>> #
>>> # The location and format of the access logfile (Common Logfile
>>> Format).
>>> # If you do not define any access logfiles within a <VirtualHost>
>>> # container, they will be logged here. Contrariwise, if you *do*
>>> # define per-<VirtualHost> access logfiles, transactions will be
>>> # logged therein and *not* in this file.
>>> #
>>> CustomLog /var/log/httpd/access_log common
>>>
>>> #
>>> # If you would like to have agent and referer logfiles, uncomment the
>>> # following directives.
>>> #
>>> #CustomLog /var/log/httpd/referer_log referer
>>> #CustomLog /var/log/httpd/agent_log agent
>>>
>>> #
>>> # If you prefer a single logfile with access, agent, and referer
>>> information
>>> # (Combined Logfile Format) you can use the following directive.
>>> #
>>> #CustomLog /var/log/httpd/access_log combined
>>>
>>> #
>>> # Optionally add a line containing the server version and virtual host
>>> # name to server-generated pages (error documents, FTP directory
>>> listings,
>>> # mod_status and mod_info output etc., but not CGI generated
>>> documents).
>>> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
>>> # Set to one of: On | Off | EMail
>>> #
>>>
>>> # Note: this is set by SuSEconfig according to the setting of the
>>> # HTTPD_SEC_SAY_FULLNAME variable in /etc/sysconfig/apache!
>>> ServerSignature On
>>>
>>>
>>> # EBCDIC configuration:
>>> # (only for mainframes using the EBCDIC codeset, currently one of:
>>> # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
>>> # The following default configuration assumes that "text files"
>>> # are stored in EBCDIC (so that you can operate on them using the
>>> # normal POSIX tools like grep and sort) while "binary files" are
>>> # stored with identical octets as on an ASCII machine.
>>> #
>>> # The directives are evaluated in configuration file order, with
>>> # the EBCDICConvert directives applied before EBCDICConvertByType.
>>> #
>>> # If you want to have ASCII HTML documents and EBCDIC HTML documents
>>> # at the same time, you can use the file extension to force
>>> # conversion off for the ASCII documents:
>>> # > AddType text/html .ahtml
>>> # > EBCDICConvert Off=InOut .ahtml
>>> #
>>> # EBCDICConvertByType On=InOut text/* message/* multipart/*
>>> # EBCDICConvertByType On=In application/x-www-form-urlencoded
>>> # EBCDICConvertByType On=InOut application/postscript model/vrml
>>> # EBCDICConvertByType Off=InOut */*
>>>
>>>
>>> #
>>> # Aliases: Add here as many aliases as you need (with no limit). The
>>> format is # Alias fakename realname
>>> #
>>> <IfModule mod_alias.c>
>>>
>>> #
>>> # Note that if you include a trailing / on fakename then the
>>> server will
>>> # require it to be present in the URL. So "/icons" isn't aliased
>>> in this
>>> # example, only "/icons/". If the fakename is slash-terminated,
>>> then the # realname must also be slash terminated, and if the
>>> fakename omits the # trailing slash, the realname must also omit it.
>>> #
>>> Alias /icons/ "/srv/www/icons/"
>>>
>>> <Directory "/srv/www/icons">
>>> Options Indexes MultiViews
>>> AllowOverride None
>>> Order allow,deny
>>> Allow from all
>>> </Directory>
>>>
>>> # This Alias will project the on-line documentation tree under
>>> /manual/
>>> # even if you change the DocumentRoot. Comment it if you don't
>>> want to # provide access to the on-line documentation.
>>> #
>>> Alias /manual/ "/srv/www/htdocs/manual/"
>>>
>>> <Directory "/srv/www/htdocs/manual">
>>> Options Indexes FollowSymlinks MultiViews
>>> AllowOverride None
>>> Order allow,deny
>>> Allow from all
>>> </Directory>
>>>
>>> #
>>> # ScriptAlias: This controls which directories contain server
>>> scripts.
>>> # ScriptAliases are essentially the same as Aliases, except that
>>> # documents in the realname directory are treated as applications
>>> and
>>> # run by the server when requested rather than as documents sent
>>> to the client.
>>> # The same rules about trailing "/" apply to ScriptAlias
>>> directives as to
>>> # Alias.
>>> #
>>> ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"
>>>
>>> <IfModule mod_perl.c>
>>> # Provide two aliases to the same cgi-bin directory, # to see
>>> the effects of the 2 different mod_perl modes.
>>> # for Apache::Registry Mode
>>> ScriptAlias /perl/ "/srv/www/cgi-bin/"
>>> # for Apache::Perlrun Mode
>>> ScriptAlias /cgi-perl/ "/srv/www/cgi-bin/"
>>> </IfModule>
>>> #
>>> # "/srv/www/cgi-bin" should be changed to whatever your
>>> ScriptAliased
>>> # CGI directory exists, if you have that configured.
>>> #
>>> <Directory "/srv/www/cgi-bin">
>>> AllowOverride None
>>> Options None
>>> Order allow,deny
>>> Allow from all
>>> </Directory>
>>>
>>> </IfModule>
>>> # End of aliases.
>>>
>>>
>>> #
>>> # set /cgi-bin for CGI execution
>>> #
>>> <Location /cgi-bin>
>>> AllowOverride None
>>> Options +ExecCGI -Includes
>>> SetHandler cgi-script
>>> </Location>
>>>
>>> #
>>> # If mod_perl is activated, load configuration information
>>> #
>>> <IfModule mod_perl.c>
>>> Perlrequire /usr/include/apache/modules/perl/startup.perl
>>> PerlModule Apache::Registry
>>>
>>> #
>>> # set Apache::Registry Mode for /perl Alias
>>> #
>>> <Location /perl>
>>> SetHandler perl-script
>>> PerlHandler Apache::Registry
>>> Options ExecCGI
>>> PerlSendHeader On
>>> </Location>
>>>
>>> #
>>> # set Apache::PerlRun Mode for /cgi-perl Alias
>>> #
>>> <Location /cgi-perl>
>>> SetHandler perl-script
>>> PerlHandler Apache::PerlRun
>>> Options ExecCGI
>>> PerlSendHeader On
>>> </Location>
>>>
>>> </IfModule>
>>>
>>>
>>>
>>> #
>>> # Redirect allows you to tell clients about documents which used to
>>> exist in
>>> # your server's namespace, but do not anymore. This allows you to
>>> tell the
>>> # clients where to look for the relocated document.
>>> # Format: Redirect old-URI new-URL
>>> #
>>>
>>> #
>>> # Directives controlling the display of server-generated directory
>>> listings.
>>> #
>>> <IfModule mod_autoindex.c>
>>>
>>> #
>>> # FancyIndexing is whether you want fancy directory indexing or
>>> standard
>>> #
>>> IndexOptions FancyIndexing
>>>
>>> #
>>> # AddIcon* directives tell the server which icon to show for
>>> different
>>> # files or filename extensions. These are only displayed for
>>> # FancyIndexed directories.
>>> #
>>> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>>>
>>> AddIconByType (TXT,/icons/text.gif) text/*
>>> AddIconByType (IMG,/icons/image2.gif) image/*
>>> AddIconByType (SND,/icons/sound2.gif) audio/*
>>> AddIconByType (VID,/icons/movie.gif) video/*
>>>
>>> AddIcon /icons/binary.gif .bin .exe
>>> AddIcon /icons/binhex.gif .hqx
>>> AddIcon /icons/tar.gif .tar
>>> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
>>> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
>>> AddIcon /icons/a.gif .ps .ai .eps
>>> AddIcon /icons/layout.gif .html .shtml .htm .pdf
>>> AddIcon /icons/text.gif .txt
>>> AddIcon /icons/c.gif .c
>>> AddIcon /icons/p.gif .pl .py
>>> AddIcon /icons/f.gif .for
>>> AddIcon /icons/dvi.gif .dvi
>>> AddIcon /icons/uuencoded.gif .uu
>>> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
>>> AddIcon /icons/tex.gif .tex
>>> AddIcon /icons/bomb.gif core
>>>
>>> AddIcon /icons/back.gif ..
>>> AddIcon /icons/hand.right.gif README
>>> AddIcon /icons/folder.gif ^^DIRECTORY^^
>>> AddIcon /icons/blank.gif ^^BLANKICON^^
>>>
>>> #
>>> # DefaultIcon is which icon to show for files which do not have
>>> an icon
>>> # explicitly set.
>>> #
>>> DefaultIcon /icons/unknown.gif
>>>
>>> #
>>> # AddDescription allows you to place a short description after a
>>> file in
>>> # server-generated indexes. These are only displayed for
>>> FancyIndexed
>>> # directories.
>>> # Format: AddDescription "description" filename
>>> #
>>> AddDescription "GZIP compressed document" .gz
>>> AddDescription "tar archive" .tar
>>> AddDescription "GZIP compressed tar archive" .tgz
>>>
>>> #
>>> # ReadmeName is the name of the README file the server will look
>>> for by
>>> # default, and append to directory listings.
>>> #
>>> # HeaderName is the name of a file which should be prepended to
>>> # directory indexes. #
>>> # If MultiViews are amongst the Options in effect, the server will
>>> # first look for name.html and include it if found. If name.html
>>> # doesn't exist, the server will then look for name.txt and include
>>> # it as plaintext if found.
>>> #
>>> ReadmeName README
>>> HeaderName HEADER
>>>
>>> #
>>> # IndexIgnore is a set of filenames which directory indexing
>>> should ignore
>>> # and not include in the listing. Shell-style wildcarding is
>>> permitted.
>>> #
>>> IndexIgnore .??* *~ *# RCS CVS *,v *,t
>>>
>>> </IfModule>
>>> # End of indexing directives.
>>>
>>> #
>>> # Document types.
>>> #
>>> <IfModule mod_mime.c>
>>>
>>> #
>>> # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
>>> uncompress
>>> # information on the fly. Note: Not all browsers support this.
>>> # Despite the name similarity, the following Add* directives have
>>> nothing
>>> # to do with the FancyIndexing customization directives above.
>>> #
>>> AddEncoding x-compress Z
>>> AddEncoding x-gzip gz tgz
>>>
>>> #
>>> # AddLanguage allows you to specify the language of a document.
>>> You can
>>> # then use content negotiation to give a browser a file in a
>>> language
>>> # it can understand. #
>>> # Note 1: The suffix does not have to be the same as the language
>>> # keyword --- those with documents in Polish (whose net-standard
>>> # language code is pl) may wish to use "AddLanguage pl .po" to
>>> # avoid the ambiguity with the common suffix for perl scripts.
>>> #
>>> # Note 2: The example entries below illustrate that in quite
>>> # some cases the two character 'Language' abbreviation is not
>>> # identical to the two character 'Country' code for its country,
>>> # E.g. 'Danmark/dk' versus 'Danish/da'.
>>> #
>>> # Note 3: In the case of 'ltz' we violate the RFC by using a
>>> three char # specifier. But there is 'work in progress' to fix
>>> this and get # the reference data for rfc1766 cleaned up.
>>> #
>>> # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
>>> # French (fr) - German (de) - Greek-Modern (el)
>>> # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk
>>> (nn)
>>> # Portugese (pt) - Luxembourgeois* (ltz)
>>> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
>>> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
>>> # Russian (ru)
>>> #
>>> AddLanguage da .dk
>>> AddLanguage nl .nl
>>> AddLanguage en .en
>>> AddLanguage et .ee
>>> AddLanguage fr .fr
>>> AddLanguage de .de
>>> AddLanguage el .el
>>> AddLanguage he .he
>>> AddCharset ISO-8859-8 .iso8859-8
>>> AddLanguage it .it
>>> AddLanguage ja .ja
>>> AddCharset ISO-2022-JP .jis
>>> AddLanguage kr .kr
>>> AddCharset ISO-2022-KR .iso-kr
>>> AddLanguage nn .nn
>>> AddLanguage no .no
>>> AddLanguage pl .po
>>> AddCharset ISO-8859-2 .iso-pl
>>> AddLanguage pt .pt
>>> AddLanguage pt-br .pt-br
>>> AddLanguage ltz .lu
>>> AddLanguage ca .ca
>>> AddLanguage es .es
>>> AddLanguage sv .sv
>>> AddLanguage cz .cz
>>> AddLanguage ru .ru
>>> AddLanguage zh-tw .tw
>>> AddLanguage tw .tw
>>> AddCharset Big5 .Big5 .big5
>>> AddCharset WINDOWS-1251 .cp-1251
>>> AddCharset CP866 .cp866
>>> AddCharset ISO-8859-5 .iso-ru
>>> AddCharset KOI8-R .koi8-r
>>> AddCharset UCS-2 .ucs2
>>> AddCharset UCS-4 .ucs4
>>> AddCharset UTF-8 .utf8
>>>
>>> # LanguagePriority allows you to give precedence to some languages
>>> # in case of a tie during content negotiation.
>>> #
>>> # Just list the languages in decreasing order of preference. We have
>>> # more or less alphabetized them here. You probably want to
>>> change this.
>>> #
>>> <IfModule mod_negotiation.c>
>>> LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br
>>> ru ltz ca es sv tw
>>> </IfModule>
>>>
>>> #
>>> # AddType allows you to tweak mime.types without actually editing
>>> it, or to
>>> # make certain files to be certain types.
>>> #
>>> AddType application/x-tar .tgz
>>>
>>> # Some more types:
>>>
>>> #
>>> # PHP 3.x:
>>> #
>>> <IfModule mod_php3.c>
>>> AddType application/x-httpd-php3 .php3
>>> AddType application/x-httpd-php3-source .phps
>>> AddType application/x-httpd-php3 .phtml
>>> </IfModule>
>>>
>>> #
>>> # PHP 4.x:
>>> #
>>> <IfModule mod_php4.c>
>>> AddType application/x-httpd-php .php
>>> AddType application/x-httpd-php .php4
>>> AddType application/x-httpd-php-source .phps
>>> </IfModule>
>>>
>>> #
>>> # mod_dtcl can execute tcl scripts
>>> #
>>> <IfModule mod_dtcl.c>
>>> AddType application/x-httpd-tcl .ttml
>>> AddType application/x-dtcl-tcl .tcl
>>> </IfModule>
>>>
>>> AddType text/vnd.wap.wml wml
>>> AddType text/vnd.wap.wmlscript wmls
>>> AddType application/vnd.wap.wmlc wmlc
>>> AddType application/vnd.wap.wmlscriptc wmlsc
>>> Addtype image/vnd.wap.wbmp wbmp
>>> #
>>> # AddHandler allows you to map certain file extensions to
>>> "handlers",
>>> # actions unrelated to filetype. These can be either built into
>>> the server
>>> # or added with the Action command (see below)
>>> #
>>> # If you want to use server side includes, or CGI outside
>>> # ScriptAliased directories, uncomment the following lines.
>>> #
>>> # To use CGI scripts:
>>> #
>>> AddHandler cgi-script .cgi
>>>
>>> #
>>> # To use server-parsed HTML files
>>> #
>>> AddType text/html .shtml
>>> AddHandler server-parsed .shtml
>>>
>>> #
>>> # Uncomment the following line to enable Apache's send-asis HTTP
>>> file
>>> # feature
>>> #
>>> #AddHandler send-as-is asis
>>>
>>> #
>>> # If you wish to use server-parsed imagemap files, use
>>> #
>>> #AddHandler imap-file map
>>>
>>> #
>>> # To enable type maps, you might want to use
>>> #
>>> #AddHandler type-map var
>>>
>>> </IfModule>
>>> # End of document types.
>>>
>>> #
>>> # Action lets you define media types that will execute a script
>>> whenever
>>> # a matching file is called. This eliminates the need for repeated URL
>>> # pathnames for oft-used CGI file processors.
>>> # Format: Action media/type /cgi-script/location
>>> # Format: Action handler-name /cgi-script/location
>>> #
>>>
>>> #
>>> # MetaDir: specifies the name of the directory in which Apache can find
>>> # meta information files. These files contain additional HTTP headers
>>> # to include when sending the document
>>> #
>>> #MetaDir .web
>>>
>>> #
>>> # MetaSuffix: specifies the file name suffix for the file containing
>>> the
>>> # meta information.
>>> #
>>> #MetaSuffix .meta
>>>
>>> #
>>> # Customizable error response (Apache style)
>>> # these come in three flavors
>>> #
>>> # 1) plain text
>>> #ErrorDocument 500 "The server made a boo boo.
>>> # n.b. the single leading (") marks it as text, it does not get
>>> output
>>> #
>>> # 2) local redirects
>>> #ErrorDocument 404 /missing.html
>>> # to redirect to local URL /missing.html
>>> #ErrorDocument 404 /cgi-bin/missing_handler.pl
>>> # N.B.: You can redirect to a script or a document using
>>> server-side-includes.
>>> #
>>> # 3) external redirects
>>> #ErrorDocument 402 http://some.other-server.com/subscription_info.html
>>> # N.B.: Many of the environment variables associated with the original
>>> # request will *not* be available to such a script.
>>>
>>> #
>>> # Customize behaviour based on the browser
>>> #
>>> <IfModule mod_setenvif.c>
>>>
>>> #
>>> # The following directives modify normal HTTP response behavior.
>>> # The first directive disables keepalive for Netscape 2.x and
>>> browsers that
>>> # spoof it. There are known problems with these browser
>>> implementations.
>>> # The second directive is for Microsoft Internet Explorer 4.0b2
>>> # which has a broken HTTP/1.1 implementation and does not properly
>>> # support keepalive when it is used on 301 or 302 (redirect)
>>> responses.
>>> #
>>> BrowserMatch "Mozilla/2" nokeepalive
>>> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
>>> force-response-1.0
>>>
>>> #
>>> # The following directive disables HTTP/1.1 responses to browsers
>>> which
>>> # are in violation of the HTTP/1.0 spec by not being able to grok a
>>> # basic 1.1 response.
>>> #
>>> BrowserMatch "RealPlayer 4\.0" force-response-1.0
>>> BrowserMatch "Java/1\.0" force-response-1.0
>>> BrowserMatch "JDK/1\.0" force-response-1.0
>>>
>>> </IfModule>
>>> # End of browser customization directives
>>>
>>> #
>>> # Allow server status reports, with the URL of
>>> http://servername/server-status
>>> # Change the ".your-domain.com" to match your domain to enable.
>>> #
>>> # Note: apache is started (by /etc/init.d/apache) with -D STATUS if
>>> # HTTPD_SEC_ACCESS_SERVERINFO is set to "yes" in #
>>> /etc/sysconfig/apache.
>>>
>>> <IfDefine STATUS>
>>> <Location /server-status>
>>> SetHandler server-status
>>> Order deny,allow
>>> Deny from all
>>> Allow from localhost
>>> </Location>
>>>
>>> #
>>> # Allow remote server configuration reports, with the URL of
>>> # http://servername/server-info (requires that mod_info.c be loaded).
>>> # Change the ".your-domain.com" to match your domain to enable.
>>> #
>>> <Location /server-info>
>>> SetHandler server-info
>>> Order deny,allow
>>> Deny from all
>>> Allow from localhost
>>> </Location>
>>>
>>> #
>>> # enable perl-status for mod_perl
>>> #
>>> <IfModule mod_perl.c>
>>> <Location /perl-status>
>>> SetHandler perl-script
>>> PerlHandler Apache::Status
>>> order deny,allow
>>> deny from all
>>> allow from localhost
>>> </Location>
>>> </IfModule>
>>> </IfDefine>
>>>
>>>
>>> #
>>> # There have been reports of people trying to abuse an old bug from
>>> pre-1.1
>>> # days. This bug involved a CGI script distributed as a part of
>>> Apache.
>>> # By uncommenting these lines you can redirect these attacks to a
>>> logging # script on phf.apache.org. Or, you can record them
>>> yourself, using the script
>>> # support/phf_abuse_log.cgi.
>>> #
>>> #<Location /cgi-bin/phf*>
>>> # Deny from all
>>> # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
>>> #</Location>
>>>
>>> #
>>> # Proxy Server directives. Uncomment the following lines to
>>> # enable the proxy server:
>>> #
>>> #<IfModule mod_proxy.c>
>>> # ProxyRequests On
>>>
>>> # <Directory proxy:*>
>>> # Order deny,allow
>>> # Deny from all
>>> # Allow from .your-domain.com
>>> # </Directory>
>>>
>>> #
>>> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
>>> # ("Full" adds the server version; "Block" removes all outgoing
>>> Via: headers)
>>> # Set to one of: Off | On | Full | Block
>>> #
>>> # ProxyVia On
>>>
>>> #
>>> # To enable the cache as well, edit and uncomment the following
>>> lines:
>>> # (no cacheing without CacheRoot)
>>> #
>>> # CacheRoot "/var/cache/http"
>>> # CacheSize 5
>>> # CacheGcInterval 4
>>> # CacheMaxExpire 24
>>> # CacheLastModifiedFactor 0.1
>>> # CacheDefaultExpire 1
>>> # NoCache a-domain.com another-domain.edu joes.garage-sale.com
>>>
>>> #</IfModule>
>>> # End of proxy directives.
>>>
>>> ### Section 3: Virtual Hosts
>>> #
>>> # VirtualHost: If you want to maintain multiple domains/hostnames on
>>> your
>>> # machine you can setup VirtualHost containers for them. Most
>>> configurations
>>> # use only name-based virtual hosts so the server doesn't need to
>>> worry about
>>> # IP addresses. This is indicated by the asterisks in the directives
>>> below.
>>> #
>>> # Please see the documentation at
>>> <URL:http://www.apache.org/docs/vhosts/>
>>> # for further details before you try to setup virtual hosts.
>>> #
>>> # You may use the command line option '-S' to verify your virtual host
>>> # configuration.
>>>
>>> #
>>> # Use name-based virtual hosting.
>>> #
>>> #NameVirtualHost *
>>>
>>> #
>>> # VirtualHost example:
>>> # Almost any Apache directive may go into a VirtualHost container.
>>> # The first VirtualHost section is used for requests without a known
>>> # server name.
>>> #
>>> #<VirtualHost *>
>>> # ServerAdmin webmaster@dummy-host.example.com
>>> # DocumentRoot /www/docs/dummy-host.example.com
>>> # ServerName dummy-host.example.com
>>> # ErrorLog logs/dummy-host.example.com-error_log
>>> # CustomLog logs/dummy-host.example.com-access_log common
>>> #</VirtualHost>
>>>
>>> #<VirtualHost _default_:*>
>>> #</VirtualHost>
>>>
>>> ##
>>> ## SSL Global Context
>>> ##
>>> ## All SSL configuration in this context applies both to
>>> ## the main server and all SSL-enabled virtual hosts.
>>> ##
>>>
>>> #
>>> # Some MIME-types for downloading Certificates and CRLs
>>> #
>>> <IfDefine SSL>
>>> AddType application/x-x509-ca-cert .crt
>>> AddType application/x-pkcs7-crl .crl
>>> </IfDefine>
>>>
>>> <IfModule mod_ssl.c>
>>>
>>> # Pass Phrase Dialog:
>>> # Configure the pass phrase gathering process.
>>> # The filtering dialog program (`builtin' is a internal
>>> # terminal dialog) has to provide the pass phrase on stdout.
>>> SSLPassPhraseDialog builtin
>>>
>>> # Inter-Process Session Cache:
>>> # Configure the SSL Session Cache: First the mechanism # to use
>>> and second the expiring timeout (in seconds).
>>> #SSLSessionCache none
>>> #SSLSessionCache shmht:/var/run/ssl_scache(512000)
>>> #SSLSessionCache shmcb:/var/run/ssl_scache(512000)
>>> SSLSessionCache dbm:/var/run/ssl_scache
>>> SSLSessionCacheTimeout 300
>>>
>>> # Semaphore:
>>> # Configure the path to the mutual exclusion semaphore the
>>> # SSL engine uses internally for inter-process synchronization.
>>> SSLMutex file:/var/run/ssl_mutex
>>>
>>> # Pseudo Random Number Generator (PRNG):
>>> # Configure one or more sources to seed the PRNG of the # SSL
>>> library. The seed data should be of good random quality.
>>> # WARNING! On some platforms /dev/random blocks if not enough entropy
>>> # is available. This means you then cannot use the /dev/random device
>>> # because it would lead to very long connection times (as long as
>>> # it requires to make more entropy available). But usually those
>>> # platforms additionally provide a /dev/urandom device which doesn't
>>> # block. So, if available, use this one instead. Read the mod_ssl
>>> User
>>> # Manual for more details.
>>> SSLRandomSeed startup builtin
>>> SSLRandomSeed connect builtin
>>> #SSLRandomSeed startup file:/dev/random 512
>>> #SSLRandomSeed startup file:/dev/urandom 512
>>> #SSLRandomSeed connect file:/dev/random 512
>>> #SSLRandomSeed connect file:/dev/urandom 512
>>>
>>> # Logging:
>>> # The home of the dedicated SSL protocol logfile. Errors are
>>> # additionally duplicated in the general error log file. Put
>>> # this somewhere where it cannot be used for symlink attacks on
>>> # a real server (i.e. somewhere where only root can write).
>>> # Log levels are (ascending order: higher ones include lower ones):
>>> # none, error, warn, info, trace, debug.
>>> SSLLog /var/log/httpd/ssl_engine_log
>>> SSLLogLevel info
>>>
>>> </IfModule>
>>>
>>> <IfDefine SSL>
>>>
>>> ##
>>> ## SSL Virtual Host Context
>>> ##
>>>
>>> <VirtualHost _default_:443>
>>>
>>> # General setup for the virtual host
>>> DocumentRoot "/srv/www/htdocs"
>>> ServerName new.host.name
>>> ServerAdmin you@your.address
>>> ErrorLog /var/log/httpd/error_log
>>> TransferLog /var/log/httpd/access_log
>>>
>>> # SSL Engine Switch:
>>> # Enable/Disable SSL for this virtual host.
>>> SSLEngine on
>>>
>>> # SSL Cipher Suite:
>>> # List the ciphers that the client is permitted to negotiate.
>>> # See the mod_ssl documentation for a complete list.
>>> SSLCipherSuite
>>> ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
>>>
>>> # Server Certificate:
>>> # Point SSLCertificateFile at a PEM encoded certificate. If
>>> # the certificate is encrypted, then you will be prompted for a
>>> # pass phrase. Note that a kill -HUP will prompt again. A test
>>> # certificate can be generated with `make certificate' under
>>> # built time. Keep in mind that if you've both a RSA and a DSA
>>> # certificate you can configure both in parallel (to also allow
>>> # the use of DSA ciphers, etc.)
>>> SSLCertificateFile /etc/httpd/ssl.crt/server.crt
>>> #SSLCertificateFile /etc/httpd/ssl.crt/server-dsa.crt
>>>
>>> # Server Private Key:
>>> # If the key is not combined with the certificate, use this
>>> # directive to point at the key file. Keep in mind that if
>>> # you've both a RSA and a DSA private key you can configure
>>> # both in parallel (to also allow the use of DSA ciphers, etc.)
>>> SSLCertificateKeyFile /etc/httpd/ssl.key/server.key
>>> #SSLCertificateKeyFile /etc/httpd/ssl.key/server-dsa.key
>>>
>>> # Server Certificate Chain:
>>> # Point SSLCertificateChainFile at a file containing the
>>> # concatenation of PEM encoded CA certificates which form the
>>> # certificate chain for the server certificate. Alternatively
>>> # the referenced file can be the same as SSLCertificateFile
>>> # when the CA certificates are directly appended to the server
>>> # certificate for convinience.
>>> #SSLCertificateChainFile /etc/httpd/ssl.crt/ca.crt
>>>
>>> # Certificate Authority (CA):
>>> # Set the CA certificate verification path where to find CA
>>> # certificates for client authentication or alternatively one
>>> # huge file containing all of them (file must be PEM encoded)
>>> # Note: Inside SSLCACertificatePath you need hash symlinks
>>> # to point to the certificate files. Use the provided
>>> # Makefile to update the hash symlinks after changes.
>>> #SSLCACertificatePath /etc/httpd/ssl.crt
>>> #SSLCACertificateFile /etc/httpd/ssl.crt/ca-bundle.crt
>>>
>>> # Certificate Revocation Lists (CRL):
>>> # Set the CA revocation path where to find CA CRLs for client
>>> # authentication or alternatively one huge file containing all
>>> # of them (file must be PEM encoded)
>>> # Note: Inside SSLCARevocationPath you need hash symlinks
>>> # to point to the certificate files. Use the provided
>>> # Makefile to update the hash symlinks after changes.
>>> #SSLCARevocationPath /etc/httpd/ssl.crl
>>> #SSLCARevocationFile /etc/httpd/ssl.crl/ca-bundle.crl
>>>
>>> # Client Authentication (Type):
>>> # Client certificate verification type and depth. Types are
>>> # none, optional, require and optional_no_ca. Depth is a
>>> # number which specifies how deeply to verify the certificate
>>> # issuer chain before deciding the certificate is not valid.
>>> #SSLVerifyClient require
>>> #SSLVerifyDepth 10
>>>
>>> # Access Control:
>>> # With SSLRequire you can do per-directory access control based
>>> # on arbitrary complex boolean expressions containing server
>>> # variable checks and other lookup directives. The syntax is a
>>> # mixture between C and Perl. See the mod_ssl documentation
>>> # for more details.
>>> #<Location />
>>> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
>>> # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
>>> # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
>>> # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
>>> # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
>>> # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
>>> #</Location>
>>>
>>> # SSL Engine Options:
>>> # Set various options for the SSL engine.
>>> # o FakeBasicAuth:
>>> # Translate the client X.509 into a Basic Authorisation. This
>>> means that
>>> # the standard Auth/DBMAuth methods can be used for access
>>> control. The
>>> # user name is the `one line' version of the client's X.509
>>> certificate.
>>> # Note that no password is obtained from the user. Every entry
>>> in the user
>>> # file needs this password: `xxj31ZMTZzkVA'.
>>> # o ExportCertData:
>>> # This exports two additional environment variables:
>>> SSL_CLIENT_CERT and
>>> # SSL_SERVER_CERT. These contain the PEM-encoded certificates of
>>> the
>>> # server (always existing) and the client (only existing when
>>> client
>>> # authentication is used). This can be used to import the
>>> certificates
>>> # into CGI scripts.
>>> # o StdEnvVars:
>>> # This exports the standard SSL/TLS related `SSL_*' environment
>>> variables.
>>> # Per default this exportation is switched off for performance
>>> reasons,
>>> # because the extraction step is an expensive operation and is
>>> usually
>>> # useless for serving static content. So one usually enables the
>>> # exportation for CGI and SSI requests only.
>>> # o CompatEnvVars:
>>> # This exports obsolete environment variables for backward
>>> compatibility
>>> # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold
>>> 2.x. Use this
>>> # to provide compatibility to existing CGI scripts.
>>> # o StrictRequire:
>>> # This denies access when "SSLRequireSSL" or "SSLRequire"
>>> applied even
>>> # under a "Satisfy any" situation, i.e. when it applies access
>>> is denied
>>> # and no other module can change it.
>>> # o OptRenegotiate:
>>> # This enables optimized SSL connection renegotiation handling
>>> when SSL
>>> # directives are used in per-directory context. #SSLOptions
>>> +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
>>> <Files ~ "\.(cgi|shtml|phtml|php3?)$">
>>> SSLOptions +StdEnvVars
>>> </Files>
>>> <Directory "/srv/www/cgi-bin">
>>> SSLOptions +StdEnvVars
>>> </Directory>
>>>
>>> # SSL Protocol Adjustments:
>>> # The safe and default but still SSL/TLS standard compliant shutdown
>>> # approach is that mod_ssl sends the close notify alert but
>>> doesn't wait for
>>> # the close notify alert from client. When you need a different
>>> shutdown
>>> # approach you can use one of the following variables:
>>> # o ssl-unclean-shutdown:
>>> # This forces an unclean shutdown when the connection is closed,
>>> i.e. no
>>> # SSL close notify alert is send or allowed to received. This
>>> violates
>>> # the SSL/TLS standard but is needed for some brain-dead
>>> browsers. Use
>>> # this when you receive I/O errors because of the standard
>>> approach where
>>> # mod_ssl sends the close notify alert.
>>> # o ssl-accurate-shutdown:
>>> # This forces an accurate shutdown when the connection is
>>> closed, i.e. a
>>> # SSL close notify alert is send and mod_ssl waits for the close
>>> notify
>>> # alert of the client. This is 100% SSL/TLS standard compliant,
>>> but in
>>> # practice often causes hanging connections with brain-dead
>>> browsers. Use
>>> # this only for browsers where you know that their SSL
>>> implementation
>>> # works correctly. # Notice: Most problems of broken clients
>>> are also related to the HTTP
>>> # keep-alive facility, so you usually additionally want to disable
>>> # keep-alive for those clients, too. Use variable "nokeepalive"
>>> for this.
>>> # Similarly, one has to force some clients to use HTTP/1.0 to
>>> workaround
>>> # their broken HTTP/1.1 implementation. Use variables
>>> "downgrade-1.0" and
>>> # "force-response-1.0" for this.
>>> SetEnvIf User-Agent ".*MSIE.*" \
>>> nokeepalive ssl-unclean-shutdown \
>>> downgrade-1.0 force-response-1.0
>>>
>>> # Per-Server Logging:
>>> # The home of a custom SSL log file. Use this when you want a
>>> # compact non-error SSL logfile on a virtual host basis.
>>> CustomLog /var/log/httpd/ssl_request_log \
>>> "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
>>>
>>> </VirtualHost> </IfDefine>
>>>
>>>
>>>
>>> # Note:
>>> #
>>> # The file that is included below is generated by SuSEconfig.
>>> #
>>> # In this file, SuSEconfig puts Include statements it finds
>>> # in /etc/httpd/modules/* (lines with "File:..." or "Include:...").
>>> # If such a module file also contains a "Variable:..." statement,
>>> the settings # in /etc/sysconfig/apache will be honored. # # In
>>> addition, any files listed in the HTTPD_CONF_INCLUDE_FILES variable
>>> # in /etc/sysconfig/apache will be included here by SuSEconfig. #
>>> This allows you to add e.g. VirtualHost statements without touching
>>> # /etc/httpd/httpd.conf itself, which means that SuSEconfig will
>>> continue doing its
>>> # job (since it would not touch httpd.conf any longer as soon it
>>> detects changes
>>> # made by the admin via the md5sum mechanism)
>>>
>>> # Include /etc/httpd/suse_include.conf
>>>
>>> Include
>>> /home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Emerson Cargnin <em...@tre-sc.gov.br>.
hi all.
I commented out the include command at httpd.conf and put the following :
#Include
/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
<IfModule mod_jk.c>
JkWorkersFile
"/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
JkLogFile
"/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
JkLogLevel debug
JkMount /examples ajp13
JkMount /examples/* ajp13
</IfModule>
And it worked.... I don't undertand any more : )
because i had this at auto/mod_jk.conf :
...
JkMount /examples/jsp/security/protected/j_security_check ajp13
JkMount /examples/snoop ajp13
JkMount /examples/servlet/* ajp13
JkMount /examples/CompressionTest ajp13
JkMount /examples/*.jsp ajp13
JkMount /examples/servletToJsp ajp13
JkMount /examples/SendMailServlet ajp13
...
Emerson Cargnin wrote:
> forget to say : apache 1.3.(26) and tomcat 4.1.24
>
> thanks
>
> Emerson Cargnin wrote:
>
>> could someone send an working copy of server.xml,workers.properties
>> and httpd.conf ?
>> I need a conf with auto-conf working....
>>
>> Hey john, i attached the files you ask......
>>
>> I don't know why, but after changing debug direct at mod_jk.conf to
>> emerg it looks that even when deleting this file, tomcat generates
>> the conf file with emerg mode.... how i put this back? I tried to put
>> debug="debug" at the "<listener..." under "<Host..." but it keeps
>> generating emerg : )
>>
>> Thanks for your help....
>>
>>
>> John Turner wrote:
>>
>>>
>>> Are you sure you are using Apache 1.3? Apache 1 typically needs
>>> both LoadModule and AddModule, you can always put the AddModule
>>> directive into an IF statement if needed, there are several examples
>>> of this in a default httpd.conf file.
>>>
>>> My HOWTO doesn't say anything about AddModule because my HOWTO deals
>>> with Apache 2, and Apache 2 doesn't use AddModule.
>>>
>>> Regarding the Apache log error, my guess is your VirtualHosts are
>>> not correct, it looks like Apache is looking for numguess.jsp within
>>> its default DocumentRoot. In a typical, default Apache + Tomcat
>>> installation, it would look for numguess.jsp in
>>> /some/path/to/tomcat/webapps/examples/jsp. So, unless you have
>>> installed Tomcat in /srv/www/htdocs
>>> ($CATALINA_HOME=/srv/www/htdocs), something else isn't right.
>>>
>>> The "done without a worker" error is pretty self-explanatory.
>>>
>>> I'd suggest that the next step be that you post your mod_jk.conf
>>> file and your workers.properties file, and describe CATALINA_HOME.
>>>
>>> John
>>>
>>> On Sat, 10 May 2003 19:34:22 -0300, Emerson Cargnin
>>> <em...@tre-sc.gov.br> wrote:
>>>
>>>> At first thanks for your fast reply : )
>>>>
>>>> - about adding AddModule mod_jk.c (if you're using JK)
>>>> I thing that adding the line "LoadModule jk_module
>>>> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you
>>>> told, and your tutorial doens't say anything about this line, but
>>>> apache just give me the following warn telling that it's already
>>>> loaded :
>>>>
>>>> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already added,
>>>> skipping
>>>>
>>>> - I'm almost there :). following the steps you tell at the
>>>> tutorial, it creates the mod_jk.conf ok, but it looks that mod_jk
>>>> doesn't find the webapps, although it's configured allright :
>>>>
>>>>
>>>> Apache log :
>>>> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does not
>>>> exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>>>>
>>>> mod_jk.log
>>>>
>>>> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
>>>> jk_uri_worker_map_t::map_uri_to_worker
>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]: Attempting
>>>> to map URI '/examples/jsp/num/numguess.jsp'
>>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
>>>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>>>
>>>>
>>>> It looks everything you said before is allright...
>>>> any clue?
>>>>
>>>> John Turner wrote:
>>>>
>>>>>
>>>>>> From comments I've received, this HOWTO is not confusing. It
>>>>>> uses Apache
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 2, but the setup is the same for Apache 1.3. It uses JK. I've
>>>>> never worked with SuSE, but I can't imagine it being much
>>>>> different than Red Hat.
>>>>>
>>>>> http://www.johnturner.com/howto/rh72-howto.html
>>>>>
>>>>> That said, I see some things with your configuration.
>>>>>
>>>>> - you need this in httpd.conf:
>>>>>
>>>>> AddModule mod_jk.c (if you're using JK)
>>>>>
>>>>> - you need a much simpler workers.properties file...dump ALL of
>>>>> that JNI stuff. Workers.properties shouldn't be more than this:
>>>>>
>>>>> # BEGIN workers.properties
>>>>> worker.list=ajp13
>>>>> worker.ajp13.port=8009
>>>>> worker.ajp13.host=localhost (or IP of Tomcat server)
>>>>> worker.ajp13.type=ajp13
>>>>> # END workers.properties
>>>>> - you need an additional Listener element in server.xml for EACH
>>>>> Host container...either you are missing it or you didn't post it.
>>>>> This is all described in my HOWTO.
>>>>>
>>>>> Your auto-generated mod_jk.conf file should look VERY similar to
>>>>> this:
>>>>> http://www.johnturner.com/howto/mod_jk_conf.html
>>>>>
>>>>> If it doesn't, go back and look at your server.xml and make sure
>>>>> your ApacheConfig Listeners are correct.
>>>>>
>>>>> John
>>>>>
>>>>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin <emerson@tre-
>>>>> sc.gov.br> wrote:
>>>>>
>>>>>> It has 4 days since i'm trying to get apache 1.3 to talk to
>>>>>> tomcat 4.1.24 through jk or jk2.
>>>>>> At first some questions that i haven't seem in my long search :
>>>>>>
>>>>>> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
>>>>>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>>>>>> compability with other php apps. I'd like to use the autoconf
>>>>>> and remote deploy feature of tomcat 4.1 (that's why i'm upgrading
>>>>>> my 3.2.3 production server, which works fine for jk)
>>>>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat
>>>>>> 4.1.24). I read about jk2 is better for apache 2.0, is it true?
>>>>>> - If does, i think i have made some mistake, because it's not
>>>>>> working :)
>>>>>>
>>>>>> My conf :
>>>>>>
>>>>>> ------------------------------------------------------------------------
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>>
>>>>>> ------------------------------------
>>>>>> http.conf (lines added):
>>>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>>>> Include
>>>>>> /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>>>
>>>>>> ------------------------------------------------------------------------
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>>
>>>>>> ------------------------------------
>>>>>> server.xml
>>>>>>
>>>>>> under "<Server port=..." i put (it's attached for better
>>>>>> undertanding) :
>>>>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>>>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>>>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>>>>> jdk14/conf/jk/workers.properties"
>>>>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>>>>> ------------------------------------------------------------------------
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>>
>>>>>> ------------------------------------
>>>>>> worker.properties configuration file (it's at
>>>>>> /opt/local/jakarta-
>>>>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>>>>
>>>>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>>>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>>>>> ps=/
>>>>>>
>>>>>> worker.list=ajp13
>>>>>> worker.ajp13.port=8009
>>>>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>>>>> worker.ajp13.type=ajp13
>>>>>> worker.ajp13.lbfactor=1
>>>>>>
>>>>>> worker.loadbalancer.type=lb
>>>>>> worker.loadbalancer.balanced_workers=ajp13
>>>>>> worker.inprocess.type=jni
>>>>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>>>>> tomcat.jar
>>>>>> worker.inprocess.cmd_line=start
>>>>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>>>>> classic$(ps)libjvm.so
>>>>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>>> inprocess.stdout
>>>>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>>> inprocess.stderr
>>>>>>
>>>>>> ------------------------------------------------------------------------
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>>
>>>>>> ------------------------------------
>>>>>>
>>>>>> here goes what happens :
>>>>>>
>>>>>> start tomcat, all ok.
>>>>>>
>>>>>> start apache, it says ok but in the log appears :
>>>>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory:
>>>>>> Error while opening the workers, jk will not work
>>>>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory:
>>>>>> Error while opening the workers, jk will not work
>>>>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>>>>> configured -- resuming normal operations
>>>>>>
>>>>>> is it necessary to do some other specific configuration?
>>>>>> I tried jk2 before this, but it didn't work too :(
>>>>>> I saw a lot of tutorials about jk and jk2, but all of them are
>>>>>> either confuse or don't use autoconf
>>>>>>
>>>>>> Any clue would help
>>>>>>
>>>>>> Thanks in advance
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>
>> ------------------------------------------------------------------------
>>
>> ########## Auto generated on Tue May 13 15:03:31 BRT 2003##########
>>
>> <IfModule !mod_jk.c>
>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>> </IfModule>
>>
>> JkWorkersFile
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>>
>> JkLogFile
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>>
>> JkLogLevel debug
>>
>>
>>
>> <VirtualHost localhost>
>> ServerName localhost
>>
>> #################### localhost:/admin ####################
>>
>> # Static files Alias /admin
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin"
>>
>>
>> <Directory
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin">
>>
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/admin/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/admin/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /admin/j_security_check ajp13
>> JkMount /admin/*.do ajp13
>> JkMount /admin/*.jsp ajp13
>>
>> #################### localhost:/webdav ####################
>>
>> # Static files Alias /webdav
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav"
>>
>> <Directory
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav">
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.jsp index.html index.htm </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/webdav/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/webdav/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /webdav/*.jsp ajp13
>>
>> #################### localhost:/examples ####################
>>
>> # Static files Alias /examples
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples"
>>
>>
>> <Directory
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples">
>>
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/examples/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/examples/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /examples/jsp/security/protected/j_security_check ajp13
>> JkMount /examples/snoop ajp13
>> JkMount /examples/servlet/* ajp13
>> JkMount /examples/CompressionTest ajp13
>> JkMount /examples/*.jsp ajp13
>> JkMount /examples/servletToJsp ajp13
>> JkMount /examples/SendMailServlet ajp13
>>
>> #################### localhost:/tomcat-docs ####################
>>
>> # Static files Alias /tomcat-docs
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs"
>>
>>
>> <Directory
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs">
>>
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/tomcat-docs/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/tomcat-docs/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /tomcat-docs/*.jsp ajp13
>>
>> #################### localhost:/manager ####################
>>
>> # Static files Alias /manager
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager"
>>
>>
>> <Directory
>> "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager">
>>
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/manager/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/manager/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /manager/list ajp13
>> JkMount /manager/serverinfo ajp13
>> JkMount /manager/deploy ajp13
>> JkMount /manager/sessions ajp13
>> JkMount /manager/reload ajp13
>> JkMount /manager/html/* ajp13
>> JkMount /manager/resources ajp13
>> JkMount /manager/start ajp13
>> JkMount /manager/stop ajp13
>> JkMount /manager/install ajp13
>> JkMount /manager/*.jsp ajp13
>> JkMount /manager/roles ajp13
>> JkMount /manager/remove ajp13
>> JkMount /manager/undeploy ajp13
>> </VirtualHost>
>>
>>
>> ------------------------------------------------------------------------
>>
>> worker.list=ajp13
>> worker.ajp13.port=8009
>> worker.ajp13.host=localhost
>> worker.ajp13.type=ajp13
>> worker.ajp13.lbfactor=1
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (172)]: Into
>> jk_uri_worker_map_t::uri_worker_map_alloc
>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (375)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open
>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (396)]:
>> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (422)]:
>> jk_uri_worker_map_t::uri_worker_map_open, done
>> [Tue May 13 15:04:37 2003] [jk_worker.c (88)]: Into wc_open
>> [Tue May 13 15:04:37 2003] [jk_worker.c (222)]: Into
>> build_worker_map, creating 1 workers
>> [Tue May 13 15:04:37 2003] [jk_worker.c (228)]: build_worker_map,
>> creating worker ajp13
>> [Tue May 13 15:04:37 2003] [jk_worker.c (148)]: Into wc_create_worker
>> [Tue May 13 15:04:37 2003] [jk_worker.c (162)]: wc_create_worker,
>> about to create instance ajp13 of ajp13
>> [Tue May 13 15:04:37 2003] [jk_ajp13_worker.c (108)]: Into
>> ajp13_worker_factory
>> [Tue May 13 15:04:37 2003] [jk_worker.c (171)]: wc_create_worker,
>> about to validate and init ajp13
>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1219)]: Into
>> jk_worker_t::validate
>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1239)]: In
>> jk_worker_t::validate for worker ajp13 contact is localhost:8009
>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1267)]: Into
>> jk_worker_t::init
>> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1287)]: In
>> jk_worker_t::init, setting socket timeout to 0
>> [Tue May 13 15:04:37 2003] [jk_worker.c (187)]: wc_create_worker, done
>> [Tue May 13 15:04:37 2003] [jk_worker.c (238)]: build_worker_map,
>> removing old ajp13 worker [Tue May 13 15:04:37 2003] [jk_worker.c
>> (250)]: build_worker_map, done
>> [Tue May 13 15:04:37 2003] [jk_worker.c (111)]: wc_open, done 1
>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (172)]: Into
>> jk_uri_worker_map_t::uri_worker_map_alloc
>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (375)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open
>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (396)]:
>> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (422)]:
>> jk_uri_worker_map_t::uri_worker_map_open, done
>> [Tue May 13 15:04:38 2003] [jk_worker.c (88)]: Into wc_open
>> [Tue May 13 15:04:38 2003] [jk_worker.c (222)]: Into
>> build_worker_map, creating 1 workers
>> [Tue May 13 15:04:38 2003] [jk_worker.c (228)]: build_worker_map,
>> creating worker ajp13
>> [Tue May 13 15:04:38 2003] [jk_worker.c (148)]: Into wc_create_worker
>> [Tue May 13 15:04:38 2003] [jk_worker.c (162)]: wc_create_worker,
>> about to create instance ajp13 of ajp13
>> [Tue May 13 15:04:38 2003] [jk_ajp13_worker.c (108)]: Into
>> ajp13_worker_factory
>> [Tue May 13 15:04:38 2003] [jk_worker.c (171)]: wc_create_worker,
>> about to validate and init ajp13
>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1219)]: Into
>> jk_worker_t::validate
>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1239)]: In
>> jk_worker_t::validate for worker ajp13 contact is localhost:8009
>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1267)]: Into
>> jk_worker_t::init
>> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1287)]: In
>> jk_worker_t::init, setting socket timeout to 0
>> [Tue May 13 15:04:38 2003] [jk_worker.c (187)]: wc_create_worker, done
>> [Tue May 13 15:04:38 2003] [jk_worker.c (238)]: build_worker_map,
>> removing old ajp13 worker [Tue May 13 15:04:38 2003] [jk_worker.c
>> (250)]: build_worker_map, done
>> [Tue May 13 15:04:38 2003] [jk_worker.c (111)]: wc_open, done 1
>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (460)]: Into
>> jk_uri_worker_map_t::map_uri_to_worker
>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (477)]: Attempting
>> to map URI '/examples/servlet/HelloWorldExample'
>> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (599)]:
>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>
>>
>> ------------------------------------------------------------------------
>>
>> ##
>> ## httpd.conf -- Apache HTTP server configuration file
>> ##
>>
>> #
>> # Based upon the NCSA server configuration files originally by Rob
>> McCool.
>> #
>> # This is the main Apache server configuration file. It contains the
>> # configuration directives that give the server its instructions.
>> # See <URL:http://www.apache.org/docs/> for detailed information about
>> # the directives.
>> #
>> # Do NOT simply read the instructions in here without understanding
>> # what they do. They're here only as hints or reminders. If you are
>> unsure
>> # consult the online docs. You have been warned. #
>> # After this file is processed, the server will look for and process
>> # /srv/www/conf/srm.conf and then /srv/www/conf/access.conf
>> # unless you have overridden these with ResourceConfig and/or
>> # AccessConfig directives here.
>> #
>> # The configuration directives are grouped into three basic sections:
>> # 1. Directives that control the operation of the Apache server
>> process as a
>> # whole (the 'global environment').
>> # 2. Directives that define the parameters of the 'main' or
>> 'default' server,
>> # which responds to requests that aren't handled by a virtual host.
>> # These directives also provide default values for the settings
>> # of all virtual hosts.
>> # 3. Settings for virtual hosts, which allow Web requests to be sent to
>> # different IP addresses or hostnames and have them handled by the
>> # same Apache server process.
>> #
>> # Configuration and logfile names: If the filenames you specify for many
>> # of the server's control files begin with "/" (or "drive:/" for
>> Win32), the
>> # server will use that explicit path. If the filenames do *not* begin
>> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
>> # with ServerRoot set to "/usr/local/apache" will be interpreted by the
>> # server as "/usr/local/apache/logs/foo.log".
>> #
>>
>> ### Section 1: Global Environment
>> #
>> # The directives in this section affect the overall operation of Apache,
>> # such as the number of concurrent requests it can handle or where it
>> # can find its configuration files.
>> #
>>
>> #
>> # ServerType is either inetd, or standalone. Inetd mode is only
>> supported on
>> # Unix platforms.
>> #
>> ServerType standalone
>>
>> #
>> # ServerRoot: The top of the directory tree under which the server's
>> # configuration, error, and log files are kept.
>> #
>> # NOTE! If you intend to place this on an NFS (or otherwise network)
>> # mounted filesystem then please read the LockFile documentation
>> # (available at
>> <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
>> # you will save yourself a lot of trouble.
>> #
>> ServerRoot "/srv/www"
>>
>> #
>> # The LockFile directive sets the path to the lockfile used when Apache
>> # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
>> # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
>> # its default value. The main reason for changing it is if the logs
>> # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
>> # DISK. The PID of the main server process is automatically appended to
>> # the filename. #
>> LockFile /var/lock/subsys/httpd/httpd.accept.lock
>>
>> #
>> # PidFile: The file in which the server should record its process
>> # identification number when it starts.
>> #
>> PidFile /var/run/httpd.pid
>>
>> #
>> # ScoreBoardFile: File used to store internal server process
>> information.
>> # Not all architectures require this. But if yours does (you'll know
>> because
>> # this file will be created when you run Apache) then you *must*
>> ensure that
>> # no two invocations of Apache share the same scoreboard file.
>> #
>> ScoreBoardFile /var/run/httpd.scoreboard
>>
>> #
>> # In the standard configuration, the server will process httpd.conf
>> (this # file, specified by the -f command line option), srm.conf, and
>> access.conf # in that order. The latter two files are now
>> distributed empty, as it is # recommended that all directives be kept
>> in a single file for simplicity. # The commented-out values below
>> are the built-in defaults. You can have the # server ignore these
>> files altogether by using "/dev/null" (for Unix) or
>> # "nul" (for Win32) for the arguments to the directives.
>> #
>> #ResourceConfig conf/srm.conf
>> #AccessConfig conf/access.conf
>>
>> #
>> # Timeout: The number of seconds before receives and sends time out.
>> #
>> Timeout 300
>>
>> #
>> # KeepAlive: Whether or not to allow persistent connections (more than
>> # one request per connection). Set to "Off" to deactivate.
>> #
>> KeepAlive On
>>
>> #
>> # MaxKeepAliveRequests: The maximum number of requests to allow
>> # during a persistent connection. Set to 0 to allow an unlimited amount.
>> # We recommend you leave this number high, for maximum performance.
>> #
>> MaxKeepAliveRequests 100
>>
>> #
>> # KeepAliveTimeout: Number of seconds to wait for the next request
>> from the
>> # same client on the same connection.
>> #
>> KeepAliveTimeout 15
>>
>> #
>> # Server-pool size regulation. Rather than making you guess how many
>> # server processes you need, Apache dynamically adapts to the load it
>> # sees --- that is, it tries to maintain enough server processes to
>> # handle the current load, plus a few spare servers to handle transient
>> # load spikes (e.g., multiple simultaneous requests from a single
>> # Netscape browser).
>> #
>> # It does this by periodically checking how many servers are waiting
>> # for a request. If there are fewer than MinSpareServers, it creates
>> # a new spare. If there are more than MaxSpareServers, some of the
>> # spares die off. The default values are probably OK for most sites.
>> #
>>
>> # Note: these two values are set by SuSEconfig according to the
>> setting of the
>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! MinSpareServers 1
>> MaxSpareServers 1
>>
>> #
>> # Number of servers to start initially --- should be a reasonable
>> ballpark
>> # figure.
>> #
>>
>> # Note: this value is set by SuSEconfig according to the setting of the
>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! StartServers 1
>>
>> #
>> # Limit on total number of servers running, i.e., limit on the number
>> # of clients who can simultaneously connect --- if this limit is ever
>> # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
>> # It is intended mainly as a brake to keep a runaway server from taking
>> # the system with it as it spirals down...
>> #
>>
>> # Note: this value is set by SuSEconfig according to the setting of the
>> # HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! MaxClients 150
>>
>> #
>> # MaxRequestsPerChild: the number of requests each child process is
>> # allowed to process before the child dies. The child will exit so
>> # as to avoid problems after prolonged use when Apache (and maybe the
>> # libraries it uses) leak memory or other resources. On most
>> systems, this
>> # isn't really needed, but a few (such as Solaris) do have notable leaks
>> # in the libraries. For these platforms, set to something like 10000
>> # or so; a setting of 0 means unlimited.
>> #
>> # NOTE: This value does not include keepalive requests after the initial
>> # request per connection. For example, if a child process handles
>> # an initial request and 10 subsequent "keptalive" requests, it
>> # would only count as 1 request towards this limit.
>> #
>> MaxRequestsPerChild 0
>>
>> #
>> # Listen: Allows you to bind Apache to specific IP addresses and/or
>> # ports, in addition to the default. See also the <VirtualHost>
>> # directive.
>> #
>> #Listen 3000
>> #Listen 12.34.56.78:80
>>
>> #
>> # BindAddress: You can support virtual hosts with this option. This
>> directive
>> # is used to tell the server which IP address to listen to. It can
>> either
>> # contain "*", an IP address, or a fully qualified Internet domain name.
>> # See also the <VirtualHost> and Listen directives.
>> #
>> #BindAddress *
>>
>> #
>> # Dynamic Shared Object (DSO) Support
>> #
>> # To be able to use the functionality of a module which was built as
>> a DSO you
>> # have to place corresponding `LoadModule' lines at this location so the
>> # directives contained in it are actually available _before_ they are
>> used.
>> # Please read the file http://httpd.apache.org/docs/dso.html for more
>> # details about the DSO mechanism and run `httpd -l' for the list of
>> already
>> # built-in (statically linked and thus always available) modules in
>> your httpd
>> # binary.
>> #
>> # Note: The order in which modules are loaded is important. Don't
>> change
>> # the order below without expert advice.
>>
>> # Note:
>> #
>> # The file that is included after the LoadModule statements is
>> generated # by SuSEconfig according to #
>> # 1) which modules (ones not included with apache) are installed
>> # 2) the settings in /etc/sysconfig/apache
>> # # SuSEconfig uses the /etc/httpd/modules/* files that come with
>> each module # to determine the necessary directives. # # Apache no
>> longer needs to be started with '-D <modules>' switches (with # the
>> exception of mod_ssl, which has a lot of conditional statements).
>>
>> # Example:
>> # LoadModule foo_module libexec/mod_foo.so
>> LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
>> LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
>> LoadModule env_module /usr/lib/apache/mod_env.so
>> LoadModule define_module /usr/lib/apache/mod_define.so
>> LoadModule config_log_module /usr/lib/apache/mod_log_config.so
>> LoadModule agent_log_module /usr/lib/apache/mod_log_agent.so
>> LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
>> LoadModule mime_magic_module /usr/lib/apache/mod_mime_magic.so
>> LoadModule mime_module /usr/lib/apache/mod_mime.so
>> LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
>> LoadModule status_module /usr/lib/apache/mod_status.so
>> LoadModule info_module /usr/lib/apache/mod_info.so
>> LoadModule includes_module /usr/lib/apache/mod_include.so
>> LoadModule autoindex_module /usr/lib/apache/mod_autoindex.so
>> LoadModule dir_module /usr/lib/apache/mod_dir.so
>> LoadModule cgi_module /usr/lib/apache/mod_cgi.so
>> LoadModule asis_module /usr/lib/apache/mod_asis.so
>> LoadModule imap_module /usr/lib/apache/mod_imap.so
>> LoadModule action_module /usr/lib/apache/mod_actions.so
>> LoadModule speling_module /usr/lib/apache/mod_speling.so
>> # mod_userdir will be included below by SuSEconfig if
>> HTTPD_SEC_PUBLIC_HTML=yes
>> LoadModule alias_module /usr/lib/apache/mod_alias.so
>> LoadModule rewrite_module /usr/lib/apache/mod_rewrite.so
>> LoadModule access_module /usr/lib/apache/mod_access.so
>> LoadModule auth_module /usr/lib/apache/mod_auth.so
>> LoadModule anon_auth_module /usr/lib/apache/mod_auth_anon.so
>> LoadModule dbm_auth_module /usr/lib/apache/mod_auth_dbm.so
>> LoadModule db_auth_module /usr/lib/apache/mod_auth_db.so
>> LoadModule digest_module /usr/lib/apache/mod_digest.so
>> LoadModule proxy_module /usr/lib/apache/libproxy.so
>> LoadModule cern_meta_module /usr/lib/apache/mod_cern_meta.so
>> LoadModule expires_module /usr/lib/apache/mod_expires.so
>> LoadModule headers_module /usr/lib/apache/mod_headers.so
>> LoadModule usertrack_module /usr/lib/apache/mod_usertrack.so
>> LoadModule unique_id_module /usr/lib/apache/mod_unique_id.so
>> LoadModule setenvif_module /usr/lib/apache/mod_setenvif.so
>> <IfDefine DUMMYSSL>
>> LoadModule ssl_module /usr/lib/apache/libssl.so
>> </IfDefine>
>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>
>>
>>
>> Include /etc/httpd/suse_loadmodule.conf
>>
>>
>> # Reconstruction of the complete module list from all available modules
>> # (static and shared ones) to achieve correct module execution order.
>> # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
>> ClearModuleList
>> AddModule mod_mmap_static.c
>> AddModule mod_vhost_alias.c
>> AddModule mod_env.c
>> AddModule mod_define.c
>> AddModule mod_log_config.c
>> AddModule mod_log_agent.c
>> AddModule mod_log_referer.c
>> AddModule mod_mime_magic.c
>> AddModule mod_mime.c
>> AddModule mod_negotiation.c
>> AddModule mod_status.c
>> AddModule mod_info.c
>> AddModule mod_include.c
>> AddModule mod_autoindex.c
>> AddModule mod_dir.c
>> AddModule mod_cgi.c
>> AddModule mod_asis.c
>> AddModule mod_imap.c
>> AddModule mod_actions.c
>> AddModule mod_speling.c
>> # mod_userdir will be included below by SuSEconfig if
>> HTTPD_SEC_PUBLIC_HTML=yes
>> AddModule mod_alias.c
>> AddModule mod_rewrite.c
>> AddModule mod_access.c
>> AddModule mod_auth.c
>> AddModule mod_auth_anon.c
>> AddModule mod_auth_dbm.c
>> AddModule mod_auth_db.c
>> AddModule mod_digest.c
>> AddModule mod_proxy.c
>> AddModule mod_cern_meta.c
>> AddModule mod_expires.c
>> AddModule mod_headers.c
>> AddModule mod_usertrack.c
>> AddModule mod_unique_id.c
>> AddModule mod_so.c
>> AddModule mod_setenvif.c
>> <IfDefine DUMMYSSL>
>> AddModule mod_ssl.c
>> </IfDefine>
>>
>> AddModule mod_jk.c
>>
>>
>>
>>
>> # Again, the following file is generated by SuSEconfig for modules
>> that actually
>> # have been installed
>>
>> Include /etc/httpd/suse_addmodule.conf
>>
>>
>> #
>> # ExtendedStatus controls whether Apache will generate "full" status
>> # information (ExtendedStatus On) or just basic information
>> (ExtendedStatus
>> # Off) when the "server-status" handler is called. The default is Off.
>> #
>> ExtendedStatus On
>>
>>
>> #
>> # To enable mod_dav, add the following directive to the appropriate
>> # container(s) in the httpd.conf file:
>> #
>> <IfModule mod_dav.c>
>> DavLockDB /var/lock/DAVLock
>> </IfModule>
>>
>>
>> #
>> #
>> # enable the SSI (Server Side Includes) execution for +x files
>> #
>> <IfModule mod_include.c>
>> XBitHack on
>> </IfModule>
>>
>>
>> ### Section 2: 'Main' server configuration
>> #
>> # The directives in this section set up the values used by the 'main'
>> # server, which responds to any requests that aren't handled by a
>> # <VirtualHost> definition. These values also provide defaults for
>> # any <VirtualHost> containers you may define later in the file.
>> #
>> # All of these directives may appear inside <VirtualHost> containers,
>> # in which case these default settings will be overridden for the
>> # virtual host being defined.
>> #
>>
>> #
>> # If your ServerType directive (set earlier in the 'Global Environment'
>> # section) is set to "inetd", the next few directives don't have any
>> # effect since their settings are defined by the inetd configuration.
>> # Skip ahead to the ServerAdmin directive.
>> #
>>
>> #
>> # Port: The port to which the standalone server listens. For
>> # ports < 1023, you will need httpd to be run as root initially.
>> #
>> Port 80
>>
>> ##
>> ## SSL Support
>> ##
>> ## When we also provide SSL we have to listen to the ## standard
>> HTTP port (see above) and to the HTTPS port
>> ##
>> <IfDefine SSL>
>> Listen 80
>> Listen 443
>> </IfDefine>
>>
>> #
>> # If you wish httpd to run as a different user or group, you must run
>> # httpd as root initially and it will switch. #
>> # User/Group: The name (or #number) of the user/group to run httpd as.
>> # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
>> # . On HPUX you may not be able to use shared memory as nobody, and the
>> # suggested workaround is to create a user www and use that user.
>> # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
>> # when the value of (unsigned)Group is above 60000; # don't use
>> Group nogroup on these systems!
>> #
>> User wwwrun
>> Group nogroup
>>
>> #
>> # ServerAdmin: Your address, where problems with the server should be
>> # e-mailed. This address appears on some server-generated pages, such
>> # as error documents.
>> #
>>
>> # Note: this email address is set by SuSEconfig according to the
>> setting of the
>> # HTTPD_SEC_SERVERADMIN variable in /etc/sysconfig/apache!
>> ServerAdmin webmaster@elbassan.tre-sc.gov.br
>>
>> #
>> # ServerName allows you to set a host name which is sent back to
>> clients for
>> # your server if it's different than the one the program would get
>> (i.e., use
>> # "www" instead of the host's real name).
>> #
>> # Note: You cannot just invent host names and hope they work. The
>> name you # define here must be a valid DNS name for your host. If you
>> don't understand
>> # this, ask your network administrator.
>> # If your host doesn't have a registered DNS name, enter its IP
>> address here.
>> # You will have to access it by its address (e.g., http://123.45.67.89/)
>> # anyway, and this will make redirections work in a sensible way.
>> #
>> # 127.0.0.1 is the TCP/IP local loop-back address, often named
>> localhost. Your # machine always knows itself by this address. If you
>> use Apache strictly for # local testing and development, you may use
>> 127.0.0.1 as the server name.
>> #
>>
>> # Note: the host name is set by SuSEconfig according to the setting
>> of the
>> # FQHOSTNAME variable in /etc/sysconfig/network/config!
>> ServerName elbassan.tre-sc.gov.br
>>
>> #
>> # DocumentRoot: The directory out of which you will serve your
>> # documents. By default, all requests are taken from this directory, but
>> # symbolic links and aliases may be used to point to other locations.
>> #
>> DocumentRoot "/srv/www/htdocs"
>>
>> #
>> # Each directory to which Apache has access, can be configured with
>> respect
>> # to which services and features are allowed and/or disabled in that
>> # directory (and its subdirectories). #
>> # First, we configure the "default" to be a very restrictive set of #
>> permissions. #
>> <Directory />
>> AuthUserFile /etc/httpd/passwd
>> AuthGroupFile /etc/httpd/group
>>
>> Options -FollowSymLinks +Multiviews
>> AllowOverride None
>>
>> </Directory>
>>
>>
>> #
>> # Note that from this point forward you must specifically allow
>> # particular features to be enabled - so if something's not working as
>> # you might expect, make sure that you have specifically enabled it
>> # below.
>> #
>>
>> #
>> # This should be changed to whatever you set DocumentRoot to.
>> #
>> <Directory "/srv/www/htdocs">
>>
>> #
>> # This may also be "None", "All", or any combination of "Indexes",
>> # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
>> #
>> # Note that "MultiViews" must be named *explicitly* --- "Options All"
>> # doesn't give it to you.
>> #
>> Options Indexes -FollowSymLinks +Includes MultiViews
>>
>> #
>> # This controls which options the .htaccess files in directories can
>> # override. Can also be "All", or any combination of "Options",
>> "FileInfo", # "AuthConfig", and "Limit"
>> #
>> AllowOverride None
>>
>> #
>> # Controls who can get stuff from this server.
>> #
>> Order allow,deny
>> Allow from all
>>
>>
>> #
>> # disable WebDAV by default for security reasons. #
>> <IfModule mod_dav.c>
>> DAV Off
>> </IfModule>
>>
>> #
>> # Enable SSI (Server Side Includes) for the demo index.html pages, as
>> some of the content
>> # is created dynamically. This should be disabled when setting up a
>> productive
>> # server.
>> <Files /srv/www/htdocs/index.htm*>
>> Options -FollowSymLinks +Includes +MultiViews
>> </Files>
>>
>> #
>> # Protect the php3 test page, so it cannot be viewed from an outside
>> system. #
>> <Files test.php3>
>> Order deny,allow
>> deny from all
>> allow from localhost
>> </Files>
>>
>> </Directory>
>>
>> #
>> # UserDir: The name of the directory which is appended onto a user's
>> home
>> # directory if a ~user request is received.
>>
>> # Note: # The next three lines are commented out here. These
>> directives and the access # control section have been put into
>> /etc/httpd/suse_public_html.conf. # If the variable
>> HTTPD_SEC_PUBLIC_HTML in /etc/sysconfig/apache # is set to "yes"
>> (default), SuSEconfig will include that file via #
>> /etc/httpd/suse_include.conf. # Also note that for the
>> /home/*/public_html directories to be browsable the # executable flag
>> must be set on the /home/* directories.
>> #
>> # <IfModule mod_userdir.c>
>> # UserDir public_html
>> # </IfModule>
>>
>> #
>> # Control access to UserDir directories. The following is an example
>> # for a site where these directories are restricted to read-only.
>> #
>> #<Directory /home/*/public_html>
>> # AllowOverride FileInfo AuthConfig Limit
>> # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
>> # <Limit GET POST OPTIONS PROPFIND>
>> # Order allow,deny
>> # Allow from all
>> # </Limit>
>> # <LimitExcept GET POST OPTIONS PROPFIND>
>> # Order deny,allow
>> # Deny from all
>> # </LimitExcept>
>> #</Directory>
>>
>> #
>> # DirectoryIndex: Name of the file or files to use as a pre-written HTML
>> # directory index. Separate multiple entries with spaces.
>> #
>> <IfModule mod_dir.c>
>> DirectoryIndex index.html
>> </IfModule>
>>
>> #
>> # AccessFileName: The name of the file to look for in each directory
>> # for access control information.
>> #
>> AccessFileName .htaccess
>>
>> #
>> # The following lines prevent .htaccess files from being viewed by
>> # Web clients. Since .htaccess files often contain authorization
>> # information, access is disallowed for security reasons. Comment
>> # these lines out if you want Web visitors to see the contents of
>> # .htaccess files. If you change the AccessFileName directive above,
>> # be sure to make the corresponding changes here.
>> #
>> # Also, folks tend to use names such as .htpasswd for password
>> # files, so this will protect those as well.
>> #
>> <Files ~ "^\.ht">
>> Order allow,deny
>> Deny from all
>> Satisfy All
>> </Files>
>>
>> #
>> # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
>> with each
>> # document that was negotiated on the basis of content. This asks proxy
>> # servers not to cache the document. Uncommenting the following line
>> disables
>> # this behavior, and proxies will be allowed to cache the documents.
>> #
>> #CacheNegotiatedDocs
>>
>> #
>> # UseCanonicalName: (new for 1.3) With this setting turned on,
>> whenever
>> # Apache needs to construct a self-referencing URL (a URL that refers
>> back
>> # to the server the response is coming from) it will use ServerName and
>> # Port to form a "canonical" name. With this setting off, Apache will
>> # use the hostname:port that the client supplied, when possible. This
>> # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
>> #
>> UseCanonicalName On
>>
>> #
>> # TypesConfig describes where the mime.types file (or equivalent) is
>> # to be found.
>> #
>> <IfModule mod_mime.c>
>> TypesConfig /etc/httpd/mime.types
>> </IfModule>
>>
>> #
>> # DefaultType is the default MIME type the server will use for a
>> document
>> # if it cannot otherwise determine one, such as from filename
>> extensions.
>> # If your server contains mostly text or HTML documents, "text/plain" is
>> # a good value. If most of your content is binary, such as applications
>> # or images, you may want to use "application/octet-stream" instead to
>> # keep browsers from trying to display binary files as though they are
>> # text.
>> #
>> DefaultType text/plain
>>
>> #
>> # The mod_mime_magic module allows the server to use various hints
>> from the
>> # contents of the file itself to determine its type. The MIMEMagicFile
>> # directive tells the module where the hint definitions are located.
>> # mod_mime_magic is not part of the default server (you have to add
>> # it yourself with a LoadModule [see the DSO paragraph in the 'Global
>> # Environment' section], or recompile the server and include
>> mod_mime_magic
>> # as part of the configuration), so it's enclosed in an <IfModule>
>> container.
>> # This means that the MIMEMagicFile directive will only be processed
>> if the
>> # module is part of the server.
>> #
>> <IfModule mod_mime_magic.c>
>> MIMEMagicFile /etc/httpd/magic
>> </IfModule>
>>
>> #
>> # HostnameLookups: Log the names of clients or just their IP addresses
>> # e.g., www.apache.org (on) or 204.62.129.132 (off).
>> # The default is off because it'd be overall better for the net if
>> people
>> # had to knowingly turn this feature on, since enabling it means that
>> # each client request will result in AT LEAST one lookup request to the
>> # nameserver.
>> #
>> HostnameLookups Off
>>
>>
>> # The following are the directives necessary to get mod_backhand
>> operational.
>> # You will need to add Backhand directives to any directories that
>> you wish
>> # to balance.. For example, you could put the following inside a
>> # ScriptAliased /cgi-cpu/ directory (for scripts that are cpu hogs)
>>
>> # <Directory ...>
>> # ... stuff ...
>> # Backhand byAge
>> # Backhand byRandom
>> # Backhand byLogWindow
>> # Backhand byCPU
>> # ... stuff ...
>> # </Directory>
>>
>> # This will eliminate servers you haven't heard from for a while
>> # Then randomize those remaining
>> # Then take the first log(n) (log base 2 of course)
>> # Then use the one with the highest CPU idle time
>>
>> <IfModule mod_backhand.c>
>> # UnixSocketDir is were the mod_backhand-Arriba file is stored
>> # (how fast your machine is). This directory must be readable and
>> writable
>> # by euid of apache (wwwrun) because the children have dropped
>> privileges
>> # before they connect to a UNIX domain socket in this directory.
>> # This directive is singular.
>> #
>> # MulticastStats of the form [<IP ADDR>] <BROADCAST ADDR>:<PORT> will
>> set
>> # mod_backhand to broadcast server statistics on that address
>> advertising
>> # for a server on <IP ADDR> or gethostbyname(gethostname())
>> # MulticastStats of the form [<IP ADDR>] <MULTICAST
>> ADDR>:<PORT>,<ttl> will
>> # set mod_backhand to multicast server statistics on that address
>> # advertising for a server on <IP ADDR> or
>> gethostbyname(gethostname())
>> # This directive is singular.
>> #
>> # AcceptStats <a.b.c.d>[/<mask>] (like 10.0.0.4 or 10.0.0.0/24) will
>> accept
>> # statistics originating from that IP or IP network.
>> # This option can be cascaded.
>>
>> UnixSocketDir /var/lib/backhand
>> # MulticastStats 128.220.221.255:4445
>> # MulticastStats 225.220.221.20:4445,1
>> # AcceptStats 128.220.221.0/24
>>
>> # Note that you _must_ configure the MulticastStats/AcceptStats
>> directives, # otherwise apache will segfault!
>>
>> # This is a status of sorts. Visit it and see how valuable it is to
>> you.
>> <Location "/backhand/">
>> SetHandler backhand-handler
>> </Location>
>> </IfModule>
>>
>>
>> #
>> # ErrorLog: The location of the error log file.
>> # If you do not specify an ErrorLog directive within a <VirtualHost>
>> # container, error messages relating to that virtual host will be
>> # logged here. If you *do* define an error logfile for a <VirtualHost>
>> # container, that host's errors will be logged there and not here.
>> #
>> ErrorLog /var/log/httpd/error_log
>>
>> #
>> # LogLevel: Control the number of messages logged to the error_log.
>> # Possible values include: debug, info, notice, warn, error, crit,
>> # alert, emerg.
>> #
>> LogLevel warn
>>
>> #
>> # The following directives define some format nicknames for use with
>> # a CustomLog directive (see below).
>> #
>> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
>> \"%{User-Agent}i\"" combined
>> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>> LogFormat "%{Referer}i -> %U" referer
>> LogFormat "%{User-agent}i" agent
>>
>> #
>> # The location and format of the access logfile (Common Logfile Format).
>> # If you do not define any access logfiles within a <VirtualHost>
>> # container, they will be logged here. Contrariwise, if you *do*
>> # define per-<VirtualHost> access logfiles, transactions will be
>> # logged therein and *not* in this file.
>> #
>> CustomLog /var/log/httpd/access_log common
>>
>> #
>> # If you would like to have agent and referer logfiles, uncomment the
>> # following directives.
>> #
>> #CustomLog /var/log/httpd/referer_log referer
>> #CustomLog /var/log/httpd/agent_log agent
>>
>> #
>> # If you prefer a single logfile with access, agent, and referer
>> information
>> # (Combined Logfile Format) you can use the following directive.
>> #
>> #CustomLog /var/log/httpd/access_log combined
>>
>> #
>> # Optionally add a line containing the server version and virtual host
>> # name to server-generated pages (error documents, FTP directory
>> listings,
>> # mod_status and mod_info output etc., but not CGI generated documents).
>> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
>> # Set to one of: On | Off | EMail
>> #
>>
>> # Note: this is set by SuSEconfig according to the setting of the
>> # HTTPD_SEC_SAY_FULLNAME variable in /etc/sysconfig/apache!
>> ServerSignature On
>>
>>
>> # EBCDIC configuration:
>> # (only for mainframes using the EBCDIC codeset, currently one of:
>> # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
>> # The following default configuration assumes that "text files"
>> # are stored in EBCDIC (so that you can operate on them using the
>> # normal POSIX tools like grep and sort) while "binary files" are
>> # stored with identical octets as on an ASCII machine.
>> #
>> # The directives are evaluated in configuration file order, with
>> # the EBCDICConvert directives applied before EBCDICConvertByType.
>> #
>> # If you want to have ASCII HTML documents and EBCDIC HTML documents
>> # at the same time, you can use the file extension to force
>> # conversion off for the ASCII documents:
>> # > AddType text/html .ahtml
>> # > EBCDICConvert Off=InOut .ahtml
>> #
>> # EBCDICConvertByType On=InOut text/* message/* multipart/*
>> # EBCDICConvertByType On=In application/x-www-form-urlencoded
>> # EBCDICConvertByType On=InOut application/postscript model/vrml
>> # EBCDICConvertByType Off=InOut */*
>>
>>
>> #
>> # Aliases: Add here as many aliases as you need (with no limit). The
>> format is # Alias fakename realname
>> #
>> <IfModule mod_alias.c>
>>
>> #
>> # Note that if you include a trailing / on fakename then the
>> server will
>> # require it to be present in the URL. So "/icons" isn't aliased
>> in this
>> # example, only "/icons/". If the fakename is slash-terminated,
>> then the # realname must also be slash terminated, and if the
>> fakename omits the # trailing slash, the realname must also omit it.
>> #
>> Alias /icons/ "/srv/www/icons/"
>>
>> <Directory "/srv/www/icons">
>> Options Indexes MultiViews
>> AllowOverride None
>> Order allow,deny
>> Allow from all
>> </Directory>
>>
>> # This Alias will project the on-line documentation tree under
>> /manual/
>> # even if you change the DocumentRoot. Comment it if you don't
>> want to # provide access to the on-line documentation.
>> #
>> Alias /manual/ "/srv/www/htdocs/manual/"
>>
>> <Directory "/srv/www/htdocs/manual">
>> Options Indexes FollowSymlinks MultiViews
>> AllowOverride None
>> Order allow,deny
>> Allow from all
>> </Directory>
>>
>> #
>> # ScriptAlias: This controls which directories contain server
>> scripts.
>> # ScriptAliases are essentially the same as Aliases, except that
>> # documents in the realname directory are treated as applications and
>> # run by the server when requested rather than as documents sent
>> to the client.
>> # The same rules about trailing "/" apply to ScriptAlias
>> directives as to
>> # Alias.
>> #
>> ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"
>>
>> <IfModule mod_perl.c>
>> # Provide two aliases to the same cgi-bin directory, # to see
>> the effects of the 2 different mod_perl modes.
>> # for Apache::Registry Mode
>> ScriptAlias /perl/ "/srv/www/cgi-bin/"
>> # for Apache::Perlrun Mode
>> ScriptAlias /cgi-perl/ "/srv/www/cgi-bin/"
>> </IfModule>
>> #
>> # "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
>> # CGI directory exists, if you have that configured.
>> #
>> <Directory "/srv/www/cgi-bin">
>> AllowOverride None
>> Options None
>> Order allow,deny
>> Allow from all
>> </Directory>
>>
>> </IfModule>
>> # End of aliases.
>>
>>
>> #
>> # set /cgi-bin for CGI execution
>> #
>> <Location /cgi-bin>
>> AllowOverride None
>> Options +ExecCGI -Includes
>> SetHandler cgi-script
>> </Location>
>>
>> #
>> # If mod_perl is activated, load configuration information
>> #
>> <IfModule mod_perl.c>
>> Perlrequire /usr/include/apache/modules/perl/startup.perl
>> PerlModule Apache::Registry
>>
>> #
>> # set Apache::Registry Mode for /perl Alias
>> #
>> <Location /perl>
>> SetHandler perl-script
>> PerlHandler Apache::Registry
>> Options ExecCGI
>> PerlSendHeader On
>> </Location>
>>
>> #
>> # set Apache::PerlRun Mode for /cgi-perl Alias
>> #
>> <Location /cgi-perl>
>> SetHandler perl-script
>> PerlHandler Apache::PerlRun
>> Options ExecCGI
>> PerlSendHeader On
>> </Location>
>>
>> </IfModule>
>>
>>
>>
>> #
>> # Redirect allows you to tell clients about documents which used to
>> exist in
>> # your server's namespace, but do not anymore. This allows you to
>> tell the
>> # clients where to look for the relocated document.
>> # Format: Redirect old-URI new-URL
>> #
>>
>> #
>> # Directives controlling the display of server-generated directory
>> listings.
>> #
>> <IfModule mod_autoindex.c>
>>
>> #
>> # FancyIndexing is whether you want fancy directory indexing or
>> standard
>> #
>> IndexOptions FancyIndexing
>>
>> #
>> # AddIcon* directives tell the server which icon to show for
>> different
>> # files or filename extensions. These are only displayed for
>> # FancyIndexed directories.
>> #
>> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>>
>> AddIconByType (TXT,/icons/text.gif) text/*
>> AddIconByType (IMG,/icons/image2.gif) image/*
>> AddIconByType (SND,/icons/sound2.gif) audio/*
>> AddIconByType (VID,/icons/movie.gif) video/*
>>
>> AddIcon /icons/binary.gif .bin .exe
>> AddIcon /icons/binhex.gif .hqx
>> AddIcon /icons/tar.gif .tar
>> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
>> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
>> AddIcon /icons/a.gif .ps .ai .eps
>> AddIcon /icons/layout.gif .html .shtml .htm .pdf
>> AddIcon /icons/text.gif .txt
>> AddIcon /icons/c.gif .c
>> AddIcon /icons/p.gif .pl .py
>> AddIcon /icons/f.gif .for
>> AddIcon /icons/dvi.gif .dvi
>> AddIcon /icons/uuencoded.gif .uu
>> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
>> AddIcon /icons/tex.gif .tex
>> AddIcon /icons/bomb.gif core
>>
>> AddIcon /icons/back.gif ..
>> AddIcon /icons/hand.right.gif README
>> AddIcon /icons/folder.gif ^^DIRECTORY^^
>> AddIcon /icons/blank.gif ^^BLANKICON^^
>>
>> #
>> # DefaultIcon is which icon to show for files which do not have an
>> icon
>> # explicitly set.
>> #
>> DefaultIcon /icons/unknown.gif
>>
>> #
>> # AddDescription allows you to place a short description after a
>> file in
>> # server-generated indexes. These are only displayed for
>> FancyIndexed
>> # directories.
>> # Format: AddDescription "description" filename
>> #
>> AddDescription "GZIP compressed document" .gz
>> AddDescription "tar archive" .tar
>> AddDescription "GZIP compressed tar archive" .tgz
>>
>> #
>> # ReadmeName is the name of the README file the server will look
>> for by
>> # default, and append to directory listings.
>> #
>> # HeaderName is the name of a file which should be prepended to
>> # directory indexes. #
>> # If MultiViews are amongst the Options in effect, the server will
>> # first look for name.html and include it if found. If name.html
>> # doesn't exist, the server will then look for name.txt and include
>> # it as plaintext if found.
>> #
>> ReadmeName README
>> HeaderName HEADER
>>
>> #
>> # IndexIgnore is a set of filenames which directory indexing
>> should ignore
>> # and not include in the listing. Shell-style wildcarding is
>> permitted.
>> #
>> IndexIgnore .??* *~ *# RCS CVS *,v *,t
>>
>> </IfModule>
>> # End of indexing directives.
>>
>> #
>> # Document types.
>> #
>> <IfModule mod_mime.c>
>>
>> #
>> # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
>> uncompress
>> # information on the fly. Note: Not all browsers support this.
>> # Despite the name similarity, the following Add* directives have
>> nothing
>> # to do with the FancyIndexing customization directives above.
>> #
>> AddEncoding x-compress Z
>> AddEncoding x-gzip gz tgz
>>
>> #
>> # AddLanguage allows you to specify the language of a document.
>> You can
>> # then use content negotiation to give a browser a file in a language
>> # it can understand. #
>> # Note 1: The suffix does not have to be the same as the language
>> # keyword --- those with documents in Polish (whose net-standard
>> # language code is pl) may wish to use "AddLanguage pl .po" to
>> # avoid the ambiguity with the common suffix for perl scripts.
>> #
>> # Note 2: The example entries below illustrate that in quite
>> # some cases the two character 'Language' abbreviation is not
>> # identical to the two character 'Country' code for its country,
>> # E.g. 'Danmark/dk' versus 'Danish/da'.
>> #
>> # Note 3: In the case of 'ltz' we violate the RFC by using a three
>> char # specifier. But there is 'work in progress' to fix this and
>> get # the reference data for rfc1766 cleaned up.
>> #
>> # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
>> # French (fr) - German (de) - Greek-Modern (el)
>> # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk
>> (nn)
>> # Portugese (pt) - Luxembourgeois* (ltz)
>> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
>> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
>> # Russian (ru)
>> #
>> AddLanguage da .dk
>> AddLanguage nl .nl
>> AddLanguage en .en
>> AddLanguage et .ee
>> AddLanguage fr .fr
>> AddLanguage de .de
>> AddLanguage el .el
>> AddLanguage he .he
>> AddCharset ISO-8859-8 .iso8859-8
>> AddLanguage it .it
>> AddLanguage ja .ja
>> AddCharset ISO-2022-JP .jis
>> AddLanguage kr .kr
>> AddCharset ISO-2022-KR .iso-kr
>> AddLanguage nn .nn
>> AddLanguage no .no
>> AddLanguage pl .po
>> AddCharset ISO-8859-2 .iso-pl
>> AddLanguage pt .pt
>> AddLanguage pt-br .pt-br
>> AddLanguage ltz .lu
>> AddLanguage ca .ca
>> AddLanguage es .es
>> AddLanguage sv .sv
>> AddLanguage cz .cz
>> AddLanguage ru .ru
>> AddLanguage zh-tw .tw
>> AddLanguage tw .tw
>> AddCharset Big5 .Big5 .big5
>> AddCharset WINDOWS-1251 .cp-1251
>> AddCharset CP866 .cp866
>> AddCharset ISO-8859-5 .iso-ru
>> AddCharset KOI8-R .koi8-r
>> AddCharset UCS-2 .ucs2
>> AddCharset UCS-4 .ucs4
>> AddCharset UTF-8 .utf8
>>
>> # LanguagePriority allows you to give precedence to some languages
>> # in case of a tie during content negotiation.
>> #
>> # Just list the languages in decreasing order of preference. We have
>> # more or less alphabetized them here. You probably want to change
>> this.
>> #
>> <IfModule mod_negotiation.c>
>> LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br
>> ru ltz ca es sv tw
>> </IfModule>
>>
>> #
>> # AddType allows you to tweak mime.types without actually editing
>> it, or to
>> # make certain files to be certain types.
>> #
>> AddType application/x-tar .tgz
>>
>> # Some more types:
>>
>> #
>> # PHP 3.x:
>> #
>> <IfModule mod_php3.c>
>> AddType application/x-httpd-php3 .php3
>> AddType application/x-httpd-php3-source .phps
>> AddType application/x-httpd-php3 .phtml
>> </IfModule>
>>
>> #
>> # PHP 4.x:
>> #
>> <IfModule mod_php4.c>
>> AddType application/x-httpd-php .php
>> AddType application/x-httpd-php .php4
>> AddType application/x-httpd-php-source .phps
>> </IfModule>
>>
>> #
>> # mod_dtcl can execute tcl scripts
>> #
>> <IfModule mod_dtcl.c>
>> AddType application/x-httpd-tcl .ttml
>> AddType application/x-dtcl-tcl .tcl
>> </IfModule>
>>
>> AddType text/vnd.wap.wml wml
>> AddType text/vnd.wap.wmlscript wmls
>> AddType application/vnd.wap.wmlc wmlc
>> AddType application/vnd.wap.wmlscriptc wmlsc
>> Addtype image/vnd.wap.wbmp wbmp
>> #
>> # AddHandler allows you to map certain file extensions to "handlers",
>> # actions unrelated to filetype. These can be either built into
>> the server
>> # or added with the Action command (see below)
>> #
>> # If you want to use server side includes, or CGI outside
>> # ScriptAliased directories, uncomment the following lines.
>> #
>> # To use CGI scripts:
>> #
>> AddHandler cgi-script .cgi
>>
>> #
>> # To use server-parsed HTML files
>> #
>> AddType text/html .shtml
>> AddHandler server-parsed .shtml
>>
>> #
>> # Uncomment the following line to enable Apache's send-asis HTTP file
>> # feature
>> #
>> #AddHandler send-as-is asis
>>
>> #
>> # If you wish to use server-parsed imagemap files, use
>> #
>> #AddHandler imap-file map
>>
>> #
>> # To enable type maps, you might want to use
>> #
>> #AddHandler type-map var
>>
>> </IfModule>
>> # End of document types.
>>
>> #
>> # Action lets you define media types that will execute a script whenever
>> # a matching file is called. This eliminates the need for repeated URL
>> # pathnames for oft-used CGI file processors.
>> # Format: Action media/type /cgi-script/location
>> # Format: Action handler-name /cgi-script/location
>> #
>>
>> #
>> # MetaDir: specifies the name of the directory in which Apache can find
>> # meta information files. These files contain additional HTTP headers
>> # to include when sending the document
>> #
>> #MetaDir .web
>>
>> #
>> # MetaSuffix: specifies the file name suffix for the file containing the
>> # meta information.
>> #
>> #MetaSuffix .meta
>>
>> #
>> # Customizable error response (Apache style)
>> # these come in three flavors
>> #
>> # 1) plain text
>> #ErrorDocument 500 "The server made a boo boo.
>> # n.b. the single leading (") marks it as text, it does not get output
>> #
>> # 2) local redirects
>> #ErrorDocument 404 /missing.html
>> # to redirect to local URL /missing.html
>> #ErrorDocument 404 /cgi-bin/missing_handler.pl
>> # N.B.: You can redirect to a script or a document using
>> server-side-includes.
>> #
>> # 3) external redirects
>> #ErrorDocument 402 http://some.other-server.com/subscription_info.html
>> # N.B.: Many of the environment variables associated with the original
>> # request will *not* be available to such a script.
>>
>> #
>> # Customize behaviour based on the browser
>> #
>> <IfModule mod_setenvif.c>
>>
>> #
>> # The following directives modify normal HTTP response behavior.
>> # The first directive disables keepalive for Netscape 2.x and
>> browsers that
>> # spoof it. There are known problems with these browser
>> implementations.
>> # The second directive is for Microsoft Internet Explorer 4.0b2
>> # which has a broken HTTP/1.1 implementation and does not properly
>> # support keepalive when it is used on 301 or 302 (redirect)
>> responses.
>> #
>> BrowserMatch "Mozilla/2" nokeepalive
>> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
>> force-response-1.0
>>
>> #
>> # The following directive disables HTTP/1.1 responses to browsers
>> which
>> # are in violation of the HTTP/1.0 spec by not being able to grok a
>> # basic 1.1 response.
>> #
>> BrowserMatch "RealPlayer 4\.0" force-response-1.0
>> BrowserMatch "Java/1\.0" force-response-1.0
>> BrowserMatch "JDK/1\.0" force-response-1.0
>>
>> </IfModule>
>> # End of browser customization directives
>>
>> #
>> # Allow server status reports, with the URL of
>> http://servername/server-status
>> # Change the ".your-domain.com" to match your domain to enable.
>> #
>> # Note: apache is started (by /etc/init.d/apache) with -D STATUS if #
>> HTTPD_SEC_ACCESS_SERVERINFO is set to "yes" in # /etc/sysconfig/apache.
>>
>> <IfDefine STATUS>
>> <Location /server-status>
>> SetHandler server-status
>> Order deny,allow
>> Deny from all
>> Allow from localhost
>> </Location>
>>
>> #
>> # Allow remote server configuration reports, with the URL of
>> # http://servername/server-info (requires that mod_info.c be loaded).
>> # Change the ".your-domain.com" to match your domain to enable.
>> #
>> <Location /server-info>
>> SetHandler server-info
>> Order deny,allow
>> Deny from all
>> Allow from localhost
>> </Location>
>>
>> #
>> # enable perl-status for mod_perl
>> #
>> <IfModule mod_perl.c>
>> <Location /perl-status>
>> SetHandler perl-script
>> PerlHandler Apache::Status
>> order deny,allow
>> deny from all
>> allow from localhost
>> </Location>
>> </IfModule>
>> </IfDefine>
>>
>>
>> #
>> # There have been reports of people trying to abuse an old bug from
>> pre-1.1
>> # days. This bug involved a CGI script distributed as a part of Apache.
>> # By uncommenting these lines you can redirect these attacks to a
>> logging # script on phf.apache.org. Or, you can record them
>> yourself, using the script
>> # support/phf_abuse_log.cgi.
>> #
>> #<Location /cgi-bin/phf*>
>> # Deny from all
>> # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
>> #</Location>
>>
>> #
>> # Proxy Server directives. Uncomment the following lines to
>> # enable the proxy server:
>> #
>> #<IfModule mod_proxy.c>
>> # ProxyRequests On
>>
>> # <Directory proxy:*>
>> # Order deny,allow
>> # Deny from all
>> # Allow from .your-domain.com
>> # </Directory>
>>
>> #
>> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
>> # ("Full" adds the server version; "Block" removes all outgoing
>> Via: headers)
>> # Set to one of: Off | On | Full | Block
>> #
>> # ProxyVia On
>>
>> #
>> # To enable the cache as well, edit and uncomment the following
>> lines:
>> # (no cacheing without CacheRoot)
>> #
>> # CacheRoot "/var/cache/http"
>> # CacheSize 5
>> # CacheGcInterval 4
>> # CacheMaxExpire 24
>> # CacheLastModifiedFactor 0.1
>> # CacheDefaultExpire 1
>> # NoCache a-domain.com another-domain.edu joes.garage-sale.com
>>
>> #</IfModule>
>> # End of proxy directives.
>>
>> ### Section 3: Virtual Hosts
>> #
>> # VirtualHost: If you want to maintain multiple domains/hostnames on
>> your
>> # machine you can setup VirtualHost containers for them. Most
>> configurations
>> # use only name-based virtual hosts so the server doesn't need to
>> worry about
>> # IP addresses. This is indicated by the asterisks in the directives
>> below.
>> #
>> # Please see the documentation at
>> <URL:http://www.apache.org/docs/vhosts/>
>> # for further details before you try to setup virtual hosts.
>> #
>> # You may use the command line option '-S' to verify your virtual host
>> # configuration.
>>
>> #
>> # Use name-based virtual hosting.
>> #
>> #NameVirtualHost *
>>
>> #
>> # VirtualHost example:
>> # Almost any Apache directive may go into a VirtualHost container.
>> # The first VirtualHost section is used for requests without a known
>> # server name.
>> #
>> #<VirtualHost *>
>> # ServerAdmin webmaster@dummy-host.example.com
>> # DocumentRoot /www/docs/dummy-host.example.com
>> # ServerName dummy-host.example.com
>> # ErrorLog logs/dummy-host.example.com-error_log
>> # CustomLog logs/dummy-host.example.com-access_log common
>> #</VirtualHost>
>>
>> #<VirtualHost _default_:*>
>> #</VirtualHost>
>>
>> ##
>> ## SSL Global Context
>> ##
>> ## All SSL configuration in this context applies both to
>> ## the main server and all SSL-enabled virtual hosts.
>> ##
>>
>> #
>> # Some MIME-types for downloading Certificates and CRLs
>> #
>> <IfDefine SSL>
>> AddType application/x-x509-ca-cert .crt
>> AddType application/x-pkcs7-crl .crl
>> </IfDefine>
>>
>> <IfModule mod_ssl.c>
>>
>> # Pass Phrase Dialog:
>> # Configure the pass phrase gathering process.
>> # The filtering dialog program (`builtin' is a internal
>> # terminal dialog) has to provide the pass phrase on stdout.
>> SSLPassPhraseDialog builtin
>>
>> # Inter-Process Session Cache:
>> # Configure the SSL Session Cache: First the mechanism # to use
>> and second the expiring timeout (in seconds).
>> #SSLSessionCache none
>> #SSLSessionCache shmht:/var/run/ssl_scache(512000)
>> #SSLSessionCache shmcb:/var/run/ssl_scache(512000)
>> SSLSessionCache dbm:/var/run/ssl_scache
>> SSLSessionCacheTimeout 300
>>
>> # Semaphore:
>> # Configure the path to the mutual exclusion semaphore the
>> # SSL engine uses internally for inter-process synchronization.
>> SSLMutex file:/var/run/ssl_mutex
>>
>> # Pseudo Random Number Generator (PRNG):
>> # Configure one or more sources to seed the PRNG of the # SSL
>> library. The seed data should be of good random quality.
>> # WARNING! On some platforms /dev/random blocks if not enough entropy
>> # is available. This means you then cannot use the /dev/random device
>> # because it would lead to very long connection times (as long as
>> # it requires to make more entropy available). But usually those
>> # platforms additionally provide a /dev/urandom device which doesn't
>> # block. So, if available, use this one instead. Read the mod_ssl User
>> # Manual for more details.
>> SSLRandomSeed startup builtin
>> SSLRandomSeed connect builtin
>> #SSLRandomSeed startup file:/dev/random 512
>> #SSLRandomSeed startup file:/dev/urandom 512
>> #SSLRandomSeed connect file:/dev/random 512
>> #SSLRandomSeed connect file:/dev/urandom 512
>>
>> # Logging:
>> # The home of the dedicated SSL protocol logfile. Errors are
>> # additionally duplicated in the general error log file. Put
>> # this somewhere where it cannot be used for symlink attacks on
>> # a real server (i.e. somewhere where only root can write).
>> # Log levels are (ascending order: higher ones include lower ones):
>> # none, error, warn, info, trace, debug.
>> SSLLog /var/log/httpd/ssl_engine_log
>> SSLLogLevel info
>>
>> </IfModule>
>>
>> <IfDefine SSL>
>>
>> ##
>> ## SSL Virtual Host Context
>> ##
>>
>> <VirtualHost _default_:443>
>>
>> # General setup for the virtual host
>> DocumentRoot "/srv/www/htdocs"
>> ServerName new.host.name
>> ServerAdmin you@your.address
>> ErrorLog /var/log/httpd/error_log
>> TransferLog /var/log/httpd/access_log
>>
>> # SSL Engine Switch:
>> # Enable/Disable SSL for this virtual host.
>> SSLEngine on
>>
>> # SSL Cipher Suite:
>> # List the ciphers that the client is permitted to negotiate.
>> # See the mod_ssl documentation for a complete list.
>> SSLCipherSuite
>> ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
>>
>> # Server Certificate:
>> # Point SSLCertificateFile at a PEM encoded certificate. If
>> # the certificate is encrypted, then you will be prompted for a
>> # pass phrase. Note that a kill -HUP will prompt again. A test
>> # certificate can be generated with `make certificate' under
>> # built time. Keep in mind that if you've both a RSA and a DSA
>> # certificate you can configure both in parallel (to also allow
>> # the use of DSA ciphers, etc.)
>> SSLCertificateFile /etc/httpd/ssl.crt/server.crt
>> #SSLCertificateFile /etc/httpd/ssl.crt/server-dsa.crt
>>
>> # Server Private Key:
>> # If the key is not combined with the certificate, use this
>> # directive to point at the key file. Keep in mind that if
>> # you've both a RSA and a DSA private key you can configure
>> # both in parallel (to also allow the use of DSA ciphers, etc.)
>> SSLCertificateKeyFile /etc/httpd/ssl.key/server.key
>> #SSLCertificateKeyFile /etc/httpd/ssl.key/server-dsa.key
>>
>> # Server Certificate Chain:
>> # Point SSLCertificateChainFile at a file containing the
>> # concatenation of PEM encoded CA certificates which form the
>> # certificate chain for the server certificate. Alternatively
>> # the referenced file can be the same as SSLCertificateFile
>> # when the CA certificates are directly appended to the server
>> # certificate for convinience.
>> #SSLCertificateChainFile /etc/httpd/ssl.crt/ca.crt
>>
>> # Certificate Authority (CA):
>> # Set the CA certificate verification path where to find CA
>> # certificates for client authentication or alternatively one
>> # huge file containing all of them (file must be PEM encoded)
>> # Note: Inside SSLCACertificatePath you need hash symlinks
>> # to point to the certificate files. Use the provided
>> # Makefile to update the hash symlinks after changes.
>> #SSLCACertificatePath /etc/httpd/ssl.crt
>> #SSLCACertificateFile /etc/httpd/ssl.crt/ca-bundle.crt
>>
>> # Certificate Revocation Lists (CRL):
>> # Set the CA revocation path where to find CA CRLs for client
>> # authentication or alternatively one huge file containing all
>> # of them (file must be PEM encoded)
>> # Note: Inside SSLCARevocationPath you need hash symlinks
>> # to point to the certificate files. Use the provided
>> # Makefile to update the hash symlinks after changes.
>> #SSLCARevocationPath /etc/httpd/ssl.crl
>> #SSLCARevocationFile /etc/httpd/ssl.crl/ca-bundle.crl
>>
>> # Client Authentication (Type):
>> # Client certificate verification type and depth. Types are
>> # none, optional, require and optional_no_ca. Depth is a
>> # number which specifies how deeply to verify the certificate
>> # issuer chain before deciding the certificate is not valid.
>> #SSLVerifyClient require
>> #SSLVerifyDepth 10
>>
>> # Access Control:
>> # With SSLRequire you can do per-directory access control based
>> # on arbitrary complex boolean expressions containing server
>> # variable checks and other lookup directives. The syntax is a
>> # mixture between C and Perl. See the mod_ssl documentation
>> # for more details.
>> #<Location />
>> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
>> # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
>> # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
>> # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
>> # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
>> # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
>> #</Location>
>>
>> # SSL Engine Options:
>> # Set various options for the SSL engine.
>> # o FakeBasicAuth:
>> # Translate the client X.509 into a Basic Authorisation. This
>> means that
>> # the standard Auth/DBMAuth methods can be used for access
>> control. The
>> # user name is the `one line' version of the client's X.509
>> certificate.
>> # Note that no password is obtained from the user. Every entry in
>> the user
>> # file needs this password: `xxj31ZMTZzkVA'.
>> # o ExportCertData:
>> # This exports two additional environment variables:
>> SSL_CLIENT_CERT and
>> # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
>> # server (always existing) and the client (only existing when client
>> # authentication is used). This can be used to import the
>> certificates
>> # into CGI scripts.
>> # o StdEnvVars:
>> # This exports the standard SSL/TLS related `SSL_*' environment
>> variables.
>> # Per default this exportation is switched off for performance
>> reasons,
>> # because the extraction step is an expensive operation and is
>> usually
>> # useless for serving static content. So one usually enables the
>> # exportation for CGI and SSI requests only.
>> # o CompatEnvVars:
>> # This exports obsolete environment variables for backward
>> compatibility
>> # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x.
>> Use this
>> # to provide compatibility to existing CGI scripts.
>> # o StrictRequire:
>> # This denies access when "SSLRequireSSL" or "SSLRequire" applied
>> even
>> # under a "Satisfy any" situation, i.e. when it applies access is
>> denied
>> # and no other module can change it.
>> # o OptRenegotiate:
>> # This enables optimized SSL connection renegotiation handling
>> when SSL
>> # directives are used in per-directory context. #SSLOptions
>> +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
>> <Files ~ "\.(cgi|shtml|phtml|php3?)$">
>> SSLOptions +StdEnvVars
>> </Files>
>> <Directory "/srv/www/cgi-bin">
>> SSLOptions +StdEnvVars
>> </Directory>
>>
>> # SSL Protocol Adjustments:
>> # The safe and default but still SSL/TLS standard compliant shutdown
>> # approach is that mod_ssl sends the close notify alert but doesn't
>> wait for
>> # the close notify alert from client. When you need a different
>> shutdown
>> # approach you can use one of the following variables:
>> # o ssl-unclean-shutdown:
>> # This forces an unclean shutdown when the connection is closed,
>> i.e. no
>> # SSL close notify alert is send or allowed to received. This
>> violates
>> # the SSL/TLS standard but is needed for some brain-dead
>> browsers. Use
>> # this when you receive I/O errors because of the standard
>> approach where
>> # mod_ssl sends the close notify alert.
>> # o ssl-accurate-shutdown:
>> # This forces an accurate shutdown when the connection is closed,
>> i.e. a
>> # SSL close notify alert is send and mod_ssl waits for the close
>> notify
>> # alert of the client. This is 100% SSL/TLS standard compliant,
>> but in
>> # practice often causes hanging connections with brain-dead
>> browsers. Use
>> # this only for browsers where you know that their SSL
>> implementation
>> # works correctly. # Notice: Most problems of broken clients
>> are also related to the HTTP
>> # keep-alive facility, so you usually additionally want to disable
>> # keep-alive for those clients, too. Use variable "nokeepalive" for
>> this.
>> # Similarly, one has to force some clients to use HTTP/1.0 to
>> workaround
>> # their broken HTTP/1.1 implementation. Use variables
>> "downgrade-1.0" and
>> # "force-response-1.0" for this.
>> SetEnvIf User-Agent ".*MSIE.*" \
>> nokeepalive ssl-unclean-shutdown \
>> downgrade-1.0 force-response-1.0
>>
>> # Per-Server Logging:
>> # The home of a custom SSL log file. Use this when you want a
>> # compact non-error SSL logfile on a virtual host basis.
>> CustomLog /var/log/httpd/ssl_request_log \
>> "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
>>
>> </VirtualHost>
>> </IfDefine>
>>
>>
>>
>> # Note:
>> #
>> # The file that is included below is generated by SuSEconfig.
>> #
>> # In this file, SuSEconfig puts Include statements it finds
>> # in /etc/httpd/modules/* (lines with "File:..." or "Include:..."). #
>> If such a module file also contains a "Variable:..." statement, the
>> settings # in /etc/sysconfig/apache will be honored. # # In addition,
>> any files listed in the HTTPD_CONF_INCLUDE_FILES variable # in
>> /etc/sysconfig/apache will be included here by SuSEconfig. # This
>> allows you to add e.g. VirtualHost statements without touching
>> # /etc/httpd/httpd.conf itself, which means that SuSEconfig will
>> continue doing its
>> # job (since it would not touch httpd.conf any longer as soon it
>> detects changes
>> # made by the admin via the md5sum mechanism)
>>
>> # Include /etc/httpd/suse_include.conf
>>
>> Include
>> /home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>
>
--
Emerson Cargnin
Analista de Sitemas
Setor de Desenvolvimento de Sistemas - TRE-SC
tel : (048) - 251-3700 - Ramal 3181
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Emerson Cargnin <em...@tre-sc.gov.br>.
forget to say : apache 1.3.(26) and tomcat 4.1.24
thanks
Emerson Cargnin wrote:
> could someone send an working copy of server.xml,workers.properties
> and httpd.conf ?
> I need a conf with auto-conf working....
>
> Hey john, i attached the files you ask......
>
> I don't know why, but after changing debug direct at mod_jk.conf to
> emerg it looks that even when deleting this file, tomcat generates the
> conf file with emerg mode.... how i put this back? I tried to put
> debug="debug" at the "<listener..." under "<Host..." but it keeps
> generating emerg : )
>
> Thanks for your help....
>
>
> John Turner wrote:
>
>>
>> Are you sure you are using Apache 1.3? Apache 1 typically needs both
>> LoadModule and AddModule, you can always put the AddModule directive
>> into an IF statement if needed, there are several examples of this in
>> a default httpd.conf file.
>>
>> My HOWTO doesn't say anything about AddModule because my HOWTO deals
>> with Apache 2, and Apache 2 doesn't use AddModule.
>>
>> Regarding the Apache log error, my guess is your VirtualHosts are not
>> correct, it looks like Apache is looking for numguess.jsp within its
>> default DocumentRoot. In a typical, default Apache + Tomcat
>> installation, it would look for numguess.jsp in
>> /some/path/to/tomcat/webapps/examples/jsp. So, unless you have
>> installed Tomcat in /srv/www/htdocs ($CATALINA_HOME=/srv/www/htdocs),
>> something else isn't right.
>>
>> The "done without a worker" error is pretty self-explanatory.
>>
>> I'd suggest that the next step be that you post your mod_jk.conf file
>> and your workers.properties file, and describe CATALINA_HOME.
>>
>> John
>>
>> On Sat, 10 May 2003 19:34:22 -0300, Emerson Cargnin
>> <em...@tre-sc.gov.br> wrote:
>>
>>> At first thanks for your fast reply : )
>>>
>>> - about adding AddModule mod_jk.c (if you're using JK)
>>> I thing that adding the line "LoadModule jk_module
>>> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you
>>> told, and your tutorial doens't say anything about this line, but
>>> apache just give me the following warn telling that it's already
>>> loaded :
>>>
>>> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already added,
>>> skipping
>>>
>>> - I'm almost there :). following the steps you tell at the tutorial,
>>> it creates the mod_jk.conf ok, but it looks that mod_jk doesn't find
>>> the webapps, although it's configured allright :
>>>
>>>
>>> Apache log :
>>> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does not
>>> exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>>>
>>> mod_jk.log
>>>
>>> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
>>> jk_uri_worker_map_t::map_uri_to_worker
>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]: Attempting
>>> to map URI '/examples/jsp/num/numguess.jsp'
>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
>>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>>
>>>
>>> It looks everything you said before is allright...
>>> any clue?
>>>
>>> John Turner wrote:
>>>
>>>>
>>>>> From comments I've received, this HOWTO is not confusing. It uses
>>>>> Apache
>>>>
>>>>
>>>>
>>>> 2, but the setup is the same for Apache 1.3. It uses JK. I've
>>>> never worked with SuSE, but I can't imagine it being much different
>>>> than Red Hat.
>>>>
>>>> http://www.johnturner.com/howto/rh72-howto.html
>>>>
>>>> That said, I see some things with your configuration.
>>>>
>>>> - you need this in httpd.conf:
>>>>
>>>> AddModule mod_jk.c (if you're using JK)
>>>>
>>>> - you need a much simpler workers.properties file...dump ALL of
>>>> that JNI stuff. Workers.properties shouldn't be more than this:
>>>>
>>>> # BEGIN workers.properties
>>>> worker.list=ajp13
>>>> worker.ajp13.port=8009
>>>> worker.ajp13.host=localhost (or IP of Tomcat server)
>>>> worker.ajp13.type=ajp13
>>>> # END workers.properties
>>>> - you need an additional Listener element in server.xml for EACH
>>>> Host container...either you are missing it or you didn't post it.
>>>> This is all described in my HOWTO.
>>>>
>>>> Your auto-generated mod_jk.conf file should look VERY similar to this:
>>>> http://www.johnturner.com/howto/mod_jk_conf.html
>>>>
>>>> If it doesn't, go back and look at your server.xml and make sure
>>>> your ApacheConfig Listeners are correct.
>>>>
>>>> John
>>>>
>>>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin <emerson@tre-
>>>> sc.gov.br> wrote:
>>>>
>>>>> It has 4 days since i'm trying to get apache 1.3 to talk to tomcat
>>>>> 4.1.24 through jk or jk2.
>>>>> At first some questions that i haven't seem in my long search :
>>>>>
>>>>> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
>>>>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>>>>> compability with other php apps. I'd like to use the autoconf and
>>>>> remote deploy feature of tomcat 4.1 (that's why i'm upgrading my
>>>>> 3.2.3 production server, which works fine for jk)
>>>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat
>>>>> 4.1.24). I read about jk2 is better for apache 2.0, is it true?
>>>>> - If does, i think i have made some mistake, because it's not
>>>>> working :)
>>>>>
>>>>> My conf :
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>> ------------------------------------
>>>>> http.conf (lines added):
>>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>>> Include
>>>>> /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>> ------------------------------------
>>>>> server.xml
>>>>>
>>>>> under "<Server port=..." i put (it's attached for better
>>>>> undertanding) :
>>>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>>>> jdk14/conf/jk/workers.properties"
>>>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>> ------------------------------------
>>>>> worker.properties configuration file (it's at
>>>>> /opt/local/jakarta-
>>>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>>>
>>>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>>>> ps=/
>>>>>
>>>>> worker.list=ajp13
>>>>> worker.ajp13.port=8009
>>>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>>>> worker.ajp13.type=ajp13
>>>>> worker.ajp13.lbfactor=1
>>>>>
>>>>> worker.loadbalancer.type=lb
>>>>> worker.loadbalancer.balanced_workers=ajp13
>>>>> worker.inprocess.type=jni
>>>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>>>> tomcat.jar
>>>>> worker.inprocess.cmd_line=start
>>>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>>>> classic$(ps)libjvm.so
>>>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>> inprocess.stdout
>>>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>> inprocess.stderr
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>> ------------------------------------
>>>>>
>>>>> here goes what happens :
>>>>>
>>>>> start tomcat, all ok.
>>>>>
>>>>> start apache, it says ok but in the log appears :
>>>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory:
>>>>> Error while opening the workers, jk will not work
>>>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory:
>>>>> Error while opening the workers, jk will not work
>>>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>>>> configured -- resuming normal operations
>>>>>
>>>>> is it necessary to do some other specific configuration?
>>>>> I tried jk2 before this, but it didn't work too :(
>>>>> I saw a lot of tutorials about jk and jk2, but all of them are
>>>>> either confuse or don't use autoconf
>>>>>
>>>>> Any clue would help
>>>>>
>>>>> Thanks in advance
>>>>>
>>>>
>>>>
>>>>
>>>
>>
>>
>>
>
>------------------------------------------------------------------------
>
>########## Auto generated on Tue May 13 15:03:31 BRT 2003##########
>
><IfModule !mod_jk.c>
> LoadModule jk_module /usr/lib/apache/mod_jk.so
></IfModule>
>
>JkWorkersFile "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>JkLogFile "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>
>JkLogLevel debug
>
>
>
><VirtualHost localhost>
> ServerName localhost
>
> #################### localhost:/admin ####################
>
> # Static files
> Alias /admin "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin"
>
> <Directory "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin">
> Options Indexes FollowSymLinks
> DirectoryIndex index.html index.htm index.jsp
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/admin/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/admin/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /admin/j_security_check ajp13
> JkMount /admin/*.do ajp13
> JkMount /admin/*.jsp ajp13
>
> #################### localhost:/webdav ####################
>
> # Static files
> Alias /webdav "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav"
>
> <Directory "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav">
> Options Indexes FollowSymLinks
> DirectoryIndex index.jsp index.html index.htm
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/webdav/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/webdav/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /webdav/*.jsp ajp13
>
> #################### localhost:/examples ####################
>
> # Static files
> Alias /examples "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples"
>
> <Directory "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples">
> Options Indexes FollowSymLinks
> DirectoryIndex index.html index.htm index.jsp
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/examples/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/examples/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /examples/jsp/security/protected/j_security_check ajp13
> JkMount /examples/snoop ajp13
> JkMount /examples/servlet/* ajp13
> JkMount /examples/CompressionTest ajp13
> JkMount /examples/*.jsp ajp13
> JkMount /examples/servletToJsp ajp13
> JkMount /examples/SendMailServlet ajp13
>
> #################### localhost:/tomcat-docs ####################
>
> # Static files
> Alias /tomcat-docs "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs"
>
> <Directory "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs">
> Options Indexes FollowSymLinks
> DirectoryIndex index.html index.htm index.jsp
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/tomcat-docs/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/tomcat-docs/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /tomcat-docs/*.jsp ajp13
>
> #################### localhost:/manager ####################
>
> # Static files
> Alias /manager "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager"
>
> <Directory "/home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager">
> Options Indexes FollowSymLinks
> DirectoryIndex index.html index.htm index.jsp
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/manager/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/manager/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /manager/list ajp13
> JkMount /manager/serverinfo ajp13
> JkMount /manager/deploy ajp13
> JkMount /manager/sessions ajp13
> JkMount /manager/reload ajp13
> JkMount /manager/html/* ajp13
> JkMount /manager/resources ajp13
> JkMount /manager/start ajp13
> JkMount /manager/stop ajp13
> JkMount /manager/install ajp13
> JkMount /manager/*.jsp ajp13
> JkMount /manager/roles ajp13
> JkMount /manager/remove ajp13
> JkMount /manager/undeploy ajp13
></VirtualHost>
>
>
>------------------------------------------------------------------------
>
>worker.list=ajp13
>worker.ajp13.port=8009
>worker.ajp13.host=localhost
>worker.ajp13.type=ajp13
>worker.ajp13.lbfactor=1
>
>
>
>------------------------------------------------------------------------
>
>[Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (172)]: Into jk_uri_worker_map_t::uri_worker_map_alloc
>[Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (375)]: Into jk_uri_worker_map_t::uri_worker_map_open
>[Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (396)]: jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>[Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (422)]: jk_uri_worker_map_t::uri_worker_map_open, done
>[Tue May 13 15:04:37 2003] [jk_worker.c (88)]: Into wc_open
>[Tue May 13 15:04:37 2003] [jk_worker.c (222)]: Into build_worker_map, creating 1 workers
>[Tue May 13 15:04:37 2003] [jk_worker.c (228)]: build_worker_map, creating worker ajp13
>[Tue May 13 15:04:37 2003] [jk_worker.c (148)]: Into wc_create_worker
>[Tue May 13 15:04:37 2003] [jk_worker.c (162)]: wc_create_worker, about to create instance ajp13 of ajp13
>[Tue May 13 15:04:37 2003] [jk_ajp13_worker.c (108)]: Into ajp13_worker_factory
>[Tue May 13 15:04:37 2003] [jk_worker.c (171)]: wc_create_worker, about to validate and init ajp13
>[Tue May 13 15:04:37 2003] [jk_ajp_common.c (1219)]: Into jk_worker_t::validate
>[Tue May 13 15:04:37 2003] [jk_ajp_common.c (1239)]: In jk_worker_t::validate for worker ajp13 contact is localhost:8009
>[Tue May 13 15:04:37 2003] [jk_ajp_common.c (1267)]: Into jk_worker_t::init
>[Tue May 13 15:04:37 2003] [jk_ajp_common.c (1287)]: In jk_worker_t::init, setting socket timeout to 0
>[Tue May 13 15:04:37 2003] [jk_worker.c (187)]: wc_create_worker, done
>[Tue May 13 15:04:37 2003] [jk_worker.c (238)]: build_worker_map, removing old ajp13 worker
>[Tue May 13 15:04:37 2003] [jk_worker.c (250)]: build_worker_map, done
>[Tue May 13 15:04:37 2003] [jk_worker.c (111)]: wc_open, done 1
>[Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (172)]: Into jk_uri_worker_map_t::uri_worker_map_alloc
>[Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (375)]: Into jk_uri_worker_map_t::uri_worker_map_open
>[Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (396)]: jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
>[Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (422)]: jk_uri_worker_map_t::uri_worker_map_open, done
>[Tue May 13 15:04:38 2003] [jk_worker.c (88)]: Into wc_open
>[Tue May 13 15:04:38 2003] [jk_worker.c (222)]: Into build_worker_map, creating 1 workers
>[Tue May 13 15:04:38 2003] [jk_worker.c (228)]: build_worker_map, creating worker ajp13
>[Tue May 13 15:04:38 2003] [jk_worker.c (148)]: Into wc_create_worker
>[Tue May 13 15:04:38 2003] [jk_worker.c (162)]: wc_create_worker, about to create instance ajp13 of ajp13
>[Tue May 13 15:04:38 2003] [jk_ajp13_worker.c (108)]: Into ajp13_worker_factory
>[Tue May 13 15:04:38 2003] [jk_worker.c (171)]: wc_create_worker, about to validate and init ajp13
>[Tue May 13 15:04:38 2003] [jk_ajp_common.c (1219)]: Into jk_worker_t::validate
>[Tue May 13 15:04:38 2003] [jk_ajp_common.c (1239)]: In jk_worker_t::validate for worker ajp13 contact is localhost:8009
>[Tue May 13 15:04:38 2003] [jk_ajp_common.c (1267)]: Into jk_worker_t::init
>[Tue May 13 15:04:38 2003] [jk_ajp_common.c (1287)]: In jk_worker_t::init, setting socket timeout to 0
>[Tue May 13 15:04:38 2003] [jk_worker.c (187)]: wc_create_worker, done
>[Tue May 13 15:04:38 2003] [jk_worker.c (238)]: build_worker_map, removing old ajp13 worker
>[Tue May 13 15:04:38 2003] [jk_worker.c (250)]: build_worker_map, done
>[Tue May 13 15:04:38 2003] [jk_worker.c (111)]: wc_open, done 1
>[Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (460)]: Into jk_uri_worker_map_t::map_uri_to_worker
>[Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (477)]: Attempting to map URI '/examples/servlet/HelloWorldExample'
>[Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (599)]: jk_uri_worker_map_t::map_uri_to_worker, done without a match
>
>
>------------------------------------------------------------------------
>
>##
>## httpd.conf -- Apache HTTP server configuration file
>##
>
>#
># Based upon the NCSA server configuration files originally by Rob McCool.
>#
># This is the main Apache server configuration file. It contains the
># configuration directives that give the server its instructions.
># See <URL:http://www.apache.org/docs/> for detailed information about
># the directives.
>#
># Do NOT simply read the instructions in here without understanding
># what they do. They're here only as hints or reminders. If you are unsure
># consult the online docs. You have been warned.
>#
># After this file is processed, the server will look for and process
># /srv/www/conf/srm.conf and then /srv/www/conf/access.conf
># unless you have overridden these with ResourceConfig and/or
># AccessConfig directives here.
>#
># The configuration directives are grouped into three basic sections:
># 1. Directives that control the operation of the Apache server process as a
># whole (the 'global environment').
># 2. Directives that define the parameters of the 'main' or 'default' server,
># which responds to requests that aren't handled by a virtual host.
># These directives also provide default values for the settings
># of all virtual hosts.
># 3. Settings for virtual hosts, which allow Web requests to be sent to
># different IP addresses or hostnames and have them handled by the
># same Apache server process.
>#
># Configuration and logfile names: If the filenames you specify for many
># of the server's control files begin with "/" (or "drive:/" for Win32), the
># server will use that explicit path. If the filenames do *not* begin
># with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
># with ServerRoot set to "/usr/local/apache" will be interpreted by the
># server as "/usr/local/apache/logs/foo.log".
>#
>
>### Section 1: Global Environment
>#
># The directives in this section affect the overall operation of Apache,
># such as the number of concurrent requests it can handle or where it
># can find its configuration files.
>#
>
>#
># ServerType is either inetd, or standalone. Inetd mode is only supported on
># Unix platforms.
>#
>ServerType standalone
>
>#
># ServerRoot: The top of the directory tree under which the server's
># configuration, error, and log files are kept.
>#
># NOTE! If you intend to place this on an NFS (or otherwise network)
># mounted filesystem then please read the LockFile documentation
># (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
># you will save yourself a lot of trouble.
>#
>ServerRoot "/srv/www"
>
>#
># The LockFile directive sets the path to the lockfile used when Apache
># is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
># USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
># its default value. The main reason for changing it is if the logs
># directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
># DISK. The PID of the main server process is automatically appended to
># the filename.
>#
>LockFile /var/lock/subsys/httpd/httpd.accept.lock
>
>#
># PidFile: The file in which the server should record its process
># identification number when it starts.
>#
>PidFile /var/run/httpd.pid
>
>#
># ScoreBoardFile: File used to store internal server process information.
># Not all architectures require this. But if yours does (you'll know because
># this file will be created when you run Apache) then you *must* ensure that
># no two invocations of Apache share the same scoreboard file.
>#
>ScoreBoardFile /var/run/httpd.scoreboard
>
>#
># In the standard configuration, the server will process httpd.conf (this
># file, specified by the -f command line option), srm.conf, and access.conf
># in that order. The latter two files are now distributed empty, as it is
># recommended that all directives be kept in a single file for simplicity.
># The commented-out values below are the built-in defaults. You can have the
># server ignore these files altogether by using "/dev/null" (for Unix) or
># "nul" (for Win32) for the arguments to the directives.
>#
>#ResourceConfig conf/srm.conf
>#AccessConfig conf/access.conf
>
>#
># Timeout: The number of seconds before receives and sends time out.
>#
>Timeout 300
>
>#
># KeepAlive: Whether or not to allow persistent connections (more than
># one request per connection). Set to "Off" to deactivate.
>#
>KeepAlive On
>
>#
># MaxKeepAliveRequests: The maximum number of requests to allow
># during a persistent connection. Set to 0 to allow an unlimited amount.
># We recommend you leave this number high, for maximum performance.
>#
>MaxKeepAliveRequests 100
>
>#
># KeepAliveTimeout: Number of seconds to wait for the next request from the
># same client on the same connection.
>#
>KeepAliveTimeout 15
>
>#
># Server-pool size regulation. Rather than making you guess how many
># server processes you need, Apache dynamically adapts to the load it
># sees --- that is, it tries to maintain enough server processes to
># handle the current load, plus a few spare servers to handle transient
># load spikes (e.g., multiple simultaneous requests from a single
># Netscape browser).
>#
># It does this by periodically checking how many servers are waiting
># for a request. If there are fewer than MinSpareServers, it creates
># a new spare. If there are more than MaxSpareServers, some of the
># spares die off. The default values are probably OK for most sites.
>#
>
># Note: these two values are set by SuSEconfig according to the setting of the
># HTTPD_PERFORMANCE variable in /etc/sysconfig/apache!
>MinSpareServers 1
>MaxSpareServers 1
>
>#
># Number of servers to start initially --- should be a reasonable ballpark
># figure.
>#
>
># Note: this value is set by SuSEconfig according to the setting of the
># HTTPD_PERFORMANCE variable in /etc/sysconfig/apache!
>StartServers 1
>
>#
># Limit on total number of servers running, i.e., limit on the number
># of clients who can simultaneously connect --- if this limit is ever
># reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
># It is intended mainly as a brake to keep a runaway server from taking
># the system with it as it spirals down...
>#
>
># Note: this value is set by SuSEconfig according to the setting of the
># HTTPD_PERFORMANCE variable in /etc/sysconfig/apache!
>MaxClients 150
>
>#
># MaxRequestsPerChild: the number of requests each child process is
># allowed to process before the child dies. The child will exit so
># as to avoid problems after prolonged use when Apache (and maybe the
># libraries it uses) leak memory or other resources. On most systems, this
># isn't really needed, but a few (such as Solaris) do have notable leaks
># in the libraries. For these platforms, set to something like 10000
># or so; a setting of 0 means unlimited.
>#
># NOTE: This value does not include keepalive requests after the initial
># request per connection. For example, if a child process handles
># an initial request and 10 subsequent "keptalive" requests, it
># would only count as 1 request towards this limit.
>#
>MaxRequestsPerChild 0
>
>#
># Listen: Allows you to bind Apache to specific IP addresses and/or
># ports, in addition to the default. See also the <VirtualHost>
># directive.
>#
>#Listen 3000
>#Listen 12.34.56.78:80
>
>#
># BindAddress: You can support virtual hosts with this option. This directive
># is used to tell the server which IP address to listen to. It can either
># contain "*", an IP address, or a fully qualified Internet domain name.
># See also the <VirtualHost> and Listen directives.
>#
>#BindAddress *
>
>#
># Dynamic Shared Object (DSO) Support
>#
># To be able to use the functionality of a module which was built as a DSO you
># have to place corresponding `LoadModule' lines at this location so the
># directives contained in it are actually available _before_ they are used.
># Please read the file http://httpd.apache.org/docs/dso.html for more
># details about the DSO mechanism and run `httpd -l' for the list of already
># built-in (statically linked and thus always available) modules in your httpd
># binary.
>#
># Note: The order in which modules are loaded is important. Don't change
># the order below without expert advice.
>
># Note:
>#
># The file that is included after the LoadModule statements is generated
># by SuSEconfig according to
>#
># 1) which modules (ones not included with apache) are installed
># 2) the settings in /etc/sysconfig/apache
>#
># SuSEconfig uses the /etc/httpd/modules/* files that come with each module
># to determine the necessary directives.
>#
># Apache no longer needs to be started with '-D <modules>' switches (with
># the exception of mod_ssl, which has a lot of conditional statements).
>
># Example:
># LoadModule foo_module libexec/mod_foo.so
>LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
>LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
>LoadModule env_module /usr/lib/apache/mod_env.so
>LoadModule define_module /usr/lib/apache/mod_define.so
>LoadModule config_log_module /usr/lib/apache/mod_log_config.so
>LoadModule agent_log_module /usr/lib/apache/mod_log_agent.so
>LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
>LoadModule mime_magic_module /usr/lib/apache/mod_mime_magic.so
>LoadModule mime_module /usr/lib/apache/mod_mime.so
>LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
>LoadModule status_module /usr/lib/apache/mod_status.so
>LoadModule info_module /usr/lib/apache/mod_info.so
>LoadModule includes_module /usr/lib/apache/mod_include.so
>LoadModule autoindex_module /usr/lib/apache/mod_autoindex.so
>LoadModule dir_module /usr/lib/apache/mod_dir.so
>LoadModule cgi_module /usr/lib/apache/mod_cgi.so
>LoadModule asis_module /usr/lib/apache/mod_asis.so
>LoadModule imap_module /usr/lib/apache/mod_imap.so
>LoadModule action_module /usr/lib/apache/mod_actions.so
>LoadModule speling_module /usr/lib/apache/mod_speling.so
># mod_userdir will be included below by SuSEconfig if HTTPD_SEC_PUBLIC_HTML=yes
>LoadModule alias_module /usr/lib/apache/mod_alias.so
>LoadModule rewrite_module /usr/lib/apache/mod_rewrite.so
>LoadModule access_module /usr/lib/apache/mod_access.so
>LoadModule auth_module /usr/lib/apache/mod_auth.so
>LoadModule anon_auth_module /usr/lib/apache/mod_auth_anon.so
>LoadModule dbm_auth_module /usr/lib/apache/mod_auth_dbm.so
>LoadModule db_auth_module /usr/lib/apache/mod_auth_db.so
>LoadModule digest_module /usr/lib/apache/mod_digest.so
>LoadModule proxy_module /usr/lib/apache/libproxy.so
>LoadModule cern_meta_module /usr/lib/apache/mod_cern_meta.so
>LoadModule expires_module /usr/lib/apache/mod_expires.so
>LoadModule headers_module /usr/lib/apache/mod_headers.so
>LoadModule usertrack_module /usr/lib/apache/mod_usertrack.so
>LoadModule unique_id_module /usr/lib/apache/mod_unique_id.so
>LoadModule setenvif_module /usr/lib/apache/mod_setenvif.so
><IfDefine DUMMYSSL>
>LoadModule ssl_module /usr/lib/apache/libssl.so
></IfDefine>
>LoadModule jk_module /usr/lib/apache/mod_jk.so
>
>
>
>Include /etc/httpd/suse_loadmodule.conf
>
>
># Reconstruction of the complete module list from all available modules
># (static and shared ones) to achieve correct module execution order.
># [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
>ClearModuleList
>AddModule mod_mmap_static.c
>AddModule mod_vhost_alias.c
>AddModule mod_env.c
>AddModule mod_define.c
>AddModule mod_log_config.c
>AddModule mod_log_agent.c
>AddModule mod_log_referer.c
>AddModule mod_mime_magic.c
>AddModule mod_mime.c
>AddModule mod_negotiation.c
>AddModule mod_status.c
>AddModule mod_info.c
>AddModule mod_include.c
>AddModule mod_autoindex.c
>AddModule mod_dir.c
>AddModule mod_cgi.c
>AddModule mod_asis.c
>AddModule mod_imap.c
>AddModule mod_actions.c
>AddModule mod_speling.c
># mod_userdir will be included below by SuSEconfig if HTTPD_SEC_PUBLIC_HTML=yes
>AddModule mod_alias.c
>AddModule mod_rewrite.c
>AddModule mod_access.c
>AddModule mod_auth.c
>AddModule mod_auth_anon.c
>AddModule mod_auth_dbm.c
>AddModule mod_auth_db.c
>AddModule mod_digest.c
>AddModule mod_proxy.c
>AddModule mod_cern_meta.c
>AddModule mod_expires.c
>AddModule mod_headers.c
>AddModule mod_usertrack.c
>AddModule mod_unique_id.c
>AddModule mod_so.c
>AddModule mod_setenvif.c
><IfDefine DUMMYSSL>
>AddModule mod_ssl.c
></IfDefine>
>
>AddModule mod_jk.c
>
>
>
>
>
># Again, the following file is generated by SuSEconfig for modules that actually
># have been installed
>
>Include /etc/httpd/suse_addmodule.conf
>
>
>#
># ExtendedStatus controls whether Apache will generate "full" status
># information (ExtendedStatus On) or just basic information (ExtendedStatus
># Off) when the "server-status" handler is called. The default is Off.
>#
>ExtendedStatus On
>
>
>#
># To enable mod_dav, add the following directive to the appropriate
># container(s) in the httpd.conf file:
>#
><IfModule mod_dav.c>
>DavLockDB /var/lock/DAVLock
></IfModule>
>
>
>#
>#
># enable the SSI (Server Side Includes) execution for +x files
>#
><IfModule mod_include.c>
>XBitHack on
></IfModule>
>
>
>### Section 2: 'Main' server configuration
>#
># The directives in this section set up the values used by the 'main'
># server, which responds to any requests that aren't handled by a
># <VirtualHost> definition. These values also provide defaults for
># any <VirtualHost> containers you may define later in the file.
>#
># All of these directives may appear inside <VirtualHost> containers,
># in which case these default settings will be overridden for the
># virtual host being defined.
>#
>
>#
># If your ServerType directive (set earlier in the 'Global Environment'
># section) is set to "inetd", the next few directives don't have any
># effect since their settings are defined by the inetd configuration.
># Skip ahead to the ServerAdmin directive.
>#
>
>#
># Port: The port to which the standalone server listens. For
># ports < 1023, you will need httpd to be run as root initially.
>#
>Port 80
>
>##
>## SSL Support
>##
>## When we also provide SSL we have to listen to the
>## standard HTTP port (see above) and to the HTTPS port
>##
><IfDefine SSL>
>Listen 80
>Listen 443
></IfDefine>
>
>#
># If you wish httpd to run as a different user or group, you must run
># httpd as root initially and it will switch.
>#
># User/Group: The name (or #number) of the user/group to run httpd as.
># . On SCO (ODT 3) use "User nouser" and "Group nogroup".
># . On HPUX you may not be able to use shared memory as nobody, and the
># suggested workaround is to create a user www and use that user.
># NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
># when the value of (unsigned)Group is above 60000;
># don't use Group nogroup on these systems!
>#
>User wwwrun
>Group nogroup
>
>#
># ServerAdmin: Your address, where problems with the server should be
># e-mailed. This address appears on some server-generated pages, such
># as error documents.
>#
>
># Note: this email address is set by SuSEconfig according to the setting of the
># HTTPD_SEC_SERVERADMIN variable in /etc/sysconfig/apache!
>ServerAdmin webmaster@elbassan.tre-sc.gov.br
>
>#
># ServerName allows you to set a host name which is sent back to clients for
># your server if it's different than the one the program would get (i.e., use
># "www" instead of the host's real name).
>#
># Note: You cannot just invent host names and hope they work. The name you
># define here must be a valid DNS name for your host. If you don't understand
># this, ask your network administrator.
># If your host doesn't have a registered DNS name, enter its IP address here.
># You will have to access it by its address (e.g., http://123.45.67.89/)
># anyway, and this will make redirections work in a sensible way.
>#
># 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
># machine always knows itself by this address. If you use Apache strictly for
># local testing and development, you may use 127.0.0.1 as the server name.
>#
>
># Note: the host name is set by SuSEconfig according to the setting of the
># FQHOSTNAME variable in /etc/sysconfig/network/config!
>ServerName elbassan.tre-sc.gov.br
>
>#
># DocumentRoot: The directory out of which you will serve your
># documents. By default, all requests are taken from this directory, but
># symbolic links and aliases may be used to point to other locations.
>#
>DocumentRoot "/srv/www/htdocs"
>
>#
># Each directory to which Apache has access, can be configured with respect
># to which services and features are allowed and/or disabled in that
># directory (and its subdirectories).
>#
># First, we configure the "default" to be a very restrictive set of
># permissions.
>#
><Directory />
> AuthUserFile /etc/httpd/passwd
> AuthGroupFile /etc/httpd/group
>
> Options -FollowSymLinks +Multiviews
> AllowOverride None
>
></Directory>
>
>
>#
># Note that from this point forward you must specifically allow
># particular features to be enabled - so if something's not working as
># you might expect, make sure that you have specifically enabled it
># below.
>#
>
>#
># This should be changed to whatever you set DocumentRoot to.
>#
><Directory "/srv/www/htdocs">
>
>#
># This may also be "None", "All", or any combination of "Indexes",
># "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
>#
># Note that "MultiViews" must be named *explicitly* --- "Options All"
># doesn't give it to you.
>#
> Options Indexes -FollowSymLinks +Includes MultiViews
>
>#
># This controls which options the .htaccess files in directories can
># override. Can also be "All", or any combination of "Options", "FileInfo",
># "AuthConfig", and "Limit"
>#
> AllowOverride None
>
>#
># Controls who can get stuff from this server.
>#
> Order allow,deny
> Allow from all
>
>
> #
> # disable WebDAV by default for security reasons.
> #
> <IfModule mod_dav.c>
> DAV Off
> </IfModule>
>
>#
># Enable SSI (Server Side Includes) for the demo index.html pages, as some of the content
># is created dynamically. This should be disabled when setting up a productive
># server.
><Files /srv/www/htdocs/index.htm*>
> Options -FollowSymLinks +Includes +MultiViews
></Files>
>
>#
># Protect the php3 test page, so it cannot be viewed from an outside system.
>#
><Files test.php3>
> Order deny,allow
> deny from all
> allow from localhost
></Files>
>
></Directory>
>
>#
># UserDir: The name of the directory which is appended onto a user's home
># directory if a ~user request is received.
>
># Note:
># The next three lines are commented out here. These directives and the access
># control section have been put into /etc/httpd/suse_public_html.conf.
># If the variable HTTPD_SEC_PUBLIC_HTML in /etc/sysconfig/apache
># is set to "yes" (default), SuSEconfig will include that file via
># /etc/httpd/suse_include.conf.
># Also note that for the /home/*/public_html directories to be browsable the
># executable flag must be set on the /home/* directories.
>
>#
># <IfModule mod_userdir.c>
># UserDir public_html
># </IfModule>
>
>#
># Control access to UserDir directories. The following is an example
># for a site where these directories are restricted to read-only.
>#
>#<Directory /home/*/public_html>
># AllowOverride FileInfo AuthConfig Limit
># Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
># <Limit GET POST OPTIONS PROPFIND>
># Order allow,deny
># Allow from all
># </Limit>
># <LimitExcept GET POST OPTIONS PROPFIND>
># Order deny,allow
># Deny from all
># </LimitExcept>
>#</Directory>
>
>#
># DirectoryIndex: Name of the file or files to use as a pre-written HTML
># directory index. Separate multiple entries with spaces.
>#
><IfModule mod_dir.c>
> DirectoryIndex index.html
></IfModule>
>
>#
># AccessFileName: The name of the file to look for in each directory
># for access control information.
>#
>AccessFileName .htaccess
>
>#
># The following lines prevent .htaccess files from being viewed by
># Web clients. Since .htaccess files often contain authorization
># information, access is disallowed for security reasons. Comment
># these lines out if you want Web visitors to see the contents of
># .htaccess files. If you change the AccessFileName directive above,
># be sure to make the corresponding changes here.
>#
># Also, folks tend to use names such as .htpasswd for password
># files, so this will protect those as well.
>#
><Files ~ "^\.ht">
> Order allow,deny
> Deny from all
> Satisfy All
></Files>
>
>#
># CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
># document that was negotiated on the basis of content. This asks proxy
># servers not to cache the document. Uncommenting the following line disables
># this behavior, and proxies will be allowed to cache the documents.
>#
>#CacheNegotiatedDocs
>
>#
># UseCanonicalName: (new for 1.3) With this setting turned on, whenever
># Apache needs to construct a self-referencing URL (a URL that refers back
># to the server the response is coming from) it will use ServerName and
># Port to form a "canonical" name. With this setting off, Apache will
># use the hostname:port that the client supplied, when possible. This
># also affects SERVER_NAME and SERVER_PORT in CGI scripts.
>#
>UseCanonicalName On
>
>#
># TypesConfig describes where the mime.types file (or equivalent) is
># to be found.
>#
><IfModule mod_mime.c>
> TypesConfig /etc/httpd/mime.types
></IfModule>
>
>#
># DefaultType is the default MIME type the server will use for a document
># if it cannot otherwise determine one, such as from filename extensions.
># If your server contains mostly text or HTML documents, "text/plain" is
># a good value. If most of your content is binary, such as applications
># or images, you may want to use "application/octet-stream" instead to
># keep browsers from trying to display binary files as though they are
># text.
>#
>DefaultType text/plain
>
>#
># The mod_mime_magic module allows the server to use various hints from the
># contents of the file itself to determine its type. The MIMEMagicFile
># directive tells the module where the hint definitions are located.
># mod_mime_magic is not part of the default server (you have to add
># it yourself with a LoadModule [see the DSO paragraph in the 'Global
># Environment' section], or recompile the server and include mod_mime_magic
># as part of the configuration), so it's enclosed in an <IfModule> container.
># This means that the MIMEMagicFile directive will only be processed if the
># module is part of the server.
>#
><IfModule mod_mime_magic.c>
> MIMEMagicFile /etc/httpd/magic
></IfModule>
>
>#
># HostnameLookups: Log the names of clients or just their IP addresses
># e.g., www.apache.org (on) or 204.62.129.132 (off).
># The default is off because it'd be overall better for the net if people
># had to knowingly turn this feature on, since enabling it means that
># each client request will result in AT LEAST one lookup request to the
># nameserver.
>#
>HostnameLookups Off
>
>
># The following are the directives necessary to get mod_backhand operational.
># You will need to add Backhand directives to any directories that you wish
># to balance.. For example, you could put the following inside a
># ScriptAliased /cgi-cpu/ directory (for scripts that are cpu hogs)
>
># <Directory ...>
># ... stuff ...
># Backhand byAge
># Backhand byRandom
># Backhand byLogWindow
># Backhand byCPU
># ... stuff ...
># </Directory>
>
># This will eliminate servers you haven't heard from for a while
># Then randomize those remaining
># Then take the first log(n) (log base 2 of course)
># Then use the one with the highest CPU idle time
>
><IfModule mod_backhand.c>
># UnixSocketDir is were the mod_backhand-Arriba file is stored
># (how fast your machine is). This directory must be readable and writable
># by euid of apache (wwwrun) because the children have dropped privileges
># before they connect to a UNIX domain socket in this directory.
># This directive is singular.
>#
># MulticastStats of the form [<IP ADDR>] <BROADCAST ADDR>:<PORT> will set
># mod_backhand to broadcast server statistics on that address advertising
># for a server on <IP ADDR> or gethostbyname(gethostname())
># MulticastStats of the form [<IP ADDR>] <MULTICAST ADDR>:<PORT>,<ttl> will
># set mod_backhand to multicast server statistics on that address
># advertising for a server on <IP ADDR> or gethostbyname(gethostname())
># This directive is singular.
>#
># AcceptStats <a.b.c.d>[/<mask>] (like 10.0.0.4 or 10.0.0.0/24) will accept
># statistics originating from that IP or IP network.
># This option can be cascaded.
>
> UnixSocketDir /var/lib/backhand
># MulticastStats 128.220.221.255:4445
># MulticastStats 225.220.221.20:4445,1
># AcceptStats 128.220.221.0/24
>
># Note that you _must_ configure the MulticastStats/AcceptStats directives,
># otherwise apache will segfault!
>
># This is a status of sorts. Visit it and see how valuable it is to you.
> <Location "/backhand/">
> SetHandler backhand-handler
> </Location>
></IfModule>
>
>
>#
># ErrorLog: The location of the error log file.
># If you do not specify an ErrorLog directive within a <VirtualHost>
># container, error messages relating to that virtual host will be
># logged here. If you *do* define an error logfile for a <VirtualHost>
># container, that host's errors will be logged there and not here.
>#
>ErrorLog /var/log/httpd/error_log
>
>#
># LogLevel: Control the number of messages logged to the error_log.
># Possible values include: debug, info, notice, warn, error, crit,
># alert, emerg.
>#
>LogLevel warn
>
>#
># The following directives define some format nicknames for use with
># a CustomLog directive (see below).
>#
>LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
>LogFormat "%h %l %u %t \"%r\" %>s %b" common
>LogFormat "%{Referer}i -> %U" referer
>LogFormat "%{User-agent}i" agent
>
>#
># The location and format of the access logfile (Common Logfile Format).
># If you do not define any access logfiles within a <VirtualHost>
># container, they will be logged here. Contrariwise, if you *do*
># define per-<VirtualHost> access logfiles, transactions will be
># logged therein and *not* in this file.
>#
>CustomLog /var/log/httpd/access_log common
>
>#
># If you would like to have agent and referer logfiles, uncomment the
># following directives.
>#
>#CustomLog /var/log/httpd/referer_log referer
>#CustomLog /var/log/httpd/agent_log agent
>
>#
># If you prefer a single logfile with access, agent, and referer information
># (Combined Logfile Format) you can use the following directive.
>#
>#CustomLog /var/log/httpd/access_log combined
>
>#
># Optionally add a line containing the server version and virtual host
># name to server-generated pages (error documents, FTP directory listings,
># mod_status and mod_info output etc., but not CGI generated documents).
># Set to "EMail" to also include a mailto: link to the ServerAdmin.
># Set to one of: On | Off | EMail
>#
>
># Note: this is set by SuSEconfig according to the setting of the
># HTTPD_SEC_SAY_FULLNAME variable in /etc/sysconfig/apache!
>ServerSignature On
>
>
># EBCDIC configuration:
># (only for mainframes using the EBCDIC codeset, currently one of:
># Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
># The following default configuration assumes that "text files"
># are stored in EBCDIC (so that you can operate on them using the
># normal POSIX tools like grep and sort) while "binary files" are
># stored with identical octets as on an ASCII machine.
>#
># The directives are evaluated in configuration file order, with
># the EBCDICConvert directives applied before EBCDICConvertByType.
>#
># If you want to have ASCII HTML documents and EBCDIC HTML documents
># at the same time, you can use the file extension to force
># conversion off for the ASCII documents:
># > AddType text/html .ahtml
># > EBCDICConvert Off=InOut .ahtml
>#
># EBCDICConvertByType On=InOut text/* message/* multipart/*
># EBCDICConvertByType On=In application/x-www-form-urlencoded
># EBCDICConvertByType On=InOut application/postscript model/vrml
># EBCDICConvertByType Off=InOut */*
>
>
>#
># Aliases: Add here as many aliases as you need (with no limit). The format is
># Alias fakename realname
>#
><IfModule mod_alias.c>
>
> #
> # Note that if you include a trailing / on fakename then the server will
> # require it to be present in the URL. So "/icons" isn't aliased in this
> # example, only "/icons/". If the fakename is slash-terminated, then the
> # realname must also be slash terminated, and if the fakename omits the
> # trailing slash, the realname must also omit it.
> #
> Alias /icons/ "/srv/www/icons/"
>
> <Directory "/srv/www/icons">
> Options Indexes MultiViews
> AllowOverride None
> Order allow,deny
> Allow from all
> </Directory>
>
> # This Alias will project the on-line documentation tree under /manual/
> # even if you change the DocumentRoot. Comment it if you don't want to
> # provide access to the on-line documentation.
> #
> Alias /manual/ "/srv/www/htdocs/manual/"
>
> <Directory "/srv/www/htdocs/manual">
> Options Indexes FollowSymlinks MultiViews
> AllowOverride None
> Order allow,deny
> Allow from all
> </Directory>
>
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the realname directory are treated as applications and
> # run by the server when requested rather than as documents sent to the client.
> # The same rules about trailing "/" apply to ScriptAlias directives as to
> # Alias.
> #
> ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"
>
><IfModule mod_perl.c>
> # Provide two aliases to the same cgi-bin directory,
> # to see the effects of the 2 different mod_perl modes.
> # for Apache::Registry Mode
> ScriptAlias /perl/ "/srv/www/cgi-bin/"
> # for Apache::Perlrun Mode
> ScriptAlias /cgi-perl/ "/srv/www/cgi-bin/"
></IfModule>
> #
> # "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory "/srv/www/cgi-bin">
> AllowOverride None
> Options None
> Order allow,deny
> Allow from all
> </Directory>
>
></IfModule>
># End of aliases.
>
>
>#
># set /cgi-bin for CGI execution
>#
><Location /cgi-bin>
>AllowOverride None
>Options +ExecCGI -Includes
>SetHandler cgi-script
></Location>
>
>#
># If mod_perl is activated, load configuration information
>#
><IfModule mod_perl.c>
>Perlrequire /usr/include/apache/modules/perl/startup.perl
>PerlModule Apache::Registry
>
>#
># set Apache::Registry Mode for /perl Alias
>#
><Location /perl>
>SetHandler perl-script
>PerlHandler Apache::Registry
>Options ExecCGI
>PerlSendHeader On
></Location>
>
>#
># set Apache::PerlRun Mode for /cgi-perl Alias
>#
><Location /cgi-perl>
>SetHandler perl-script
>PerlHandler Apache::PerlRun
>Options ExecCGI
>PerlSendHeader On
></Location>
>
></IfModule>
>
>
>
>#
># Redirect allows you to tell clients about documents which used to exist in
># your server's namespace, but do not anymore. This allows you to tell the
># clients where to look for the relocated document.
># Format: Redirect old-URI new-URL
>#
>
>#
># Directives controlling the display of server-generated directory listings.
>#
><IfModule mod_autoindex.c>
>
> #
> # FancyIndexing is whether you want fancy directory indexing or standard
> #
> IndexOptions FancyIndexing
>
> #
> # AddIcon* directives tell the server which icon to show for different
> # files or filename extensions. These are only displayed for
> # FancyIndexed directories.
> #
> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>
> AddIconByType (TXT,/icons/text.gif) text/*
> AddIconByType (IMG,/icons/image2.gif) image/*
> AddIconByType (SND,/icons/sound2.gif) audio/*
> AddIconByType (VID,/icons/movie.gif) video/*
>
> AddIcon /icons/binary.gif .bin .exe
> AddIcon /icons/binhex.gif .hqx
> AddIcon /icons/tar.gif .tar
> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
> AddIcon /icons/a.gif .ps .ai .eps
> AddIcon /icons/layout.gif .html .shtml .htm .pdf
> AddIcon /icons/text.gif .txt
> AddIcon /icons/c.gif .c
> AddIcon /icons/p.gif .pl .py
> AddIcon /icons/f.gif .for
> AddIcon /icons/dvi.gif .dvi
> AddIcon /icons/uuencoded.gif .uu
> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
> AddIcon /icons/tex.gif .tex
> AddIcon /icons/bomb.gif core
>
> AddIcon /icons/back.gif ..
> AddIcon /icons/hand.right.gif README
> AddIcon /icons/folder.gif ^^DIRECTORY^^
> AddIcon /icons/blank.gif ^^BLANKICON^^
>
> #
> # DefaultIcon is which icon to show for files which do not have an icon
> # explicitly set.
> #
> DefaultIcon /icons/unknown.gif
>
> #
> # AddDescription allows you to place a short description after a file in
> # server-generated indexes. These are only displayed for FancyIndexed
> # directories.
> # Format: AddDescription "description" filename
> #
> AddDescription "GZIP compressed document" .gz
> AddDescription "tar archive" .tar
> AddDescription "GZIP compressed tar archive" .tgz
>
> #
> # ReadmeName is the name of the README file the server will look for by
> # default, and append to directory listings.
> #
> # HeaderName is the name of a file which should be prepended to
> # directory indexes.
> #
> # If MultiViews are amongst the Options in effect, the server will
> # first look for name.html and include it if found. If name.html
> # doesn't exist, the server will then look for name.txt and include
> # it as plaintext if found.
> #
> ReadmeName README
> HeaderName HEADER
>
> #
> # IndexIgnore is a set of filenames which directory indexing should ignore
> # and not include in the listing. Shell-style wildcarding is permitted.
> #
> IndexIgnore .??* *~ *# RCS CVS *,v *,t
>
></IfModule>
># End of indexing directives.
>
>#
># Document types.
>#
><IfModule mod_mime.c>
>
> #
> # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
> # information on the fly. Note: Not all browsers support this.
> # Despite the name similarity, the following Add* directives have nothing
> # to do with the FancyIndexing customization directives above.
> #
> AddEncoding x-compress Z
> AddEncoding x-gzip gz tgz
>
> #
> # AddLanguage allows you to specify the language of a document. You can
> # then use content negotiation to give a browser a file in a language
> # it can understand.
> #
> # Note 1: The suffix does not have to be the same as the language
> # keyword --- those with documents in Polish (whose net-standard
> # language code is pl) may wish to use "AddLanguage pl .po" to
> # avoid the ambiguity with the common suffix for perl scripts.
> #
> # Note 2: The example entries below illustrate that in quite
> # some cases the two character 'Language' abbreviation is not
> # identical to the two character 'Country' code for its country,
> # E.g. 'Danmark/dk' versus 'Danish/da'.
> #
> # Note 3: In the case of 'ltz' we violate the RFC by using a three char
> # specifier. But there is 'work in progress' to fix this and get
> # the reference data for rfc1766 cleaned up.
> #
> # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
> # French (fr) - German (de) - Greek-Modern (el)
> # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
> # Portugese (pt) - Luxembourgeois* (ltz)
> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
> # Russian (ru)
> #
> AddLanguage da .dk
> AddLanguage nl .nl
> AddLanguage en .en
> AddLanguage et .ee
> AddLanguage fr .fr
> AddLanguage de .de
> AddLanguage el .el
> AddLanguage he .he
> AddCharset ISO-8859-8 .iso8859-8
> AddLanguage it .it
> AddLanguage ja .ja
> AddCharset ISO-2022-JP .jis
> AddLanguage kr .kr
> AddCharset ISO-2022-KR .iso-kr
> AddLanguage nn .nn
> AddLanguage no .no
> AddLanguage pl .po
> AddCharset ISO-8859-2 .iso-pl
> AddLanguage pt .pt
> AddLanguage pt-br .pt-br
> AddLanguage ltz .lu
> AddLanguage ca .ca
> AddLanguage es .es
> AddLanguage sv .sv
> AddLanguage cz .cz
> AddLanguage ru .ru
> AddLanguage zh-tw .tw
> AddLanguage tw .tw
> AddCharset Big5 .Big5 .big5
> AddCharset WINDOWS-1251 .cp-1251
> AddCharset CP866 .cp866
> AddCharset ISO-8859-5 .iso-ru
> AddCharset KOI8-R .koi8-r
> AddCharset UCS-2 .ucs2
> AddCharset UCS-4 .ucs4
> AddCharset UTF-8 .utf8
>
> # LanguagePriority allows you to give precedence to some languages
> # in case of a tie during content negotiation.
> #
> # Just list the languages in decreasing order of preference. We have
> # more or less alphabetized them here. You probably want to change this.
> #
> <IfModule mod_negotiation.c>
> LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
> </IfModule>
>
> #
> # AddType allows you to tweak mime.types without actually editing it, or to
> # make certain files to be certain types.
> #
> AddType application/x-tar .tgz
>
> # Some more types:
>
> #
> # PHP 3.x:
> #
> <IfModule mod_php3.c>
> AddType application/x-httpd-php3 .php3
> AddType application/x-httpd-php3-source .phps
> AddType application/x-httpd-php3 .phtml
> </IfModule>
>
> #
> # PHP 4.x:
> #
> <IfModule mod_php4.c>
> AddType application/x-httpd-php .php
> AddType application/x-httpd-php .php4
> AddType application/x-httpd-php-source .phps
> </IfModule>
>
> #
> # mod_dtcl can execute tcl scripts
> #
> <IfModule mod_dtcl.c>
> AddType application/x-httpd-tcl .ttml
> AddType application/x-dtcl-tcl .tcl
> </IfModule>
>
> AddType text/vnd.wap.wml wml
> AddType text/vnd.wap.wmlscript wmls
> AddType application/vnd.wap.wmlc wmlc
> AddType application/vnd.wap.wmlscriptc wmlsc
> Addtype image/vnd.wap.wbmp wbmp
> #
> # AddHandler allows you to map certain file extensions to "handlers",
> # actions unrelated to filetype. These can be either built into the server
> # or added with the Action command (see below)
> #
> # If you want to use server side includes, or CGI outside
> # ScriptAliased directories, uncomment the following lines.
> #
> # To use CGI scripts:
> #
> AddHandler cgi-script .cgi
>
> #
> # To use server-parsed HTML files
> #
> AddType text/html .shtml
> AddHandler server-parsed .shtml
>
> #
> # Uncomment the following line to enable Apache's send-asis HTTP file
> # feature
> #
> #AddHandler send-as-is asis
>
> #
> # If you wish to use server-parsed imagemap files, use
> #
> #AddHandler imap-file map
>
> #
> # To enable type maps, you might want to use
> #
> #AddHandler type-map var
>
></IfModule>
># End of document types.
>
>#
># Action lets you define media types that will execute a script whenever
># a matching file is called. This eliminates the need for repeated URL
># pathnames for oft-used CGI file processors.
># Format: Action media/type /cgi-script/location
># Format: Action handler-name /cgi-script/location
>#
>
>#
># MetaDir: specifies the name of the directory in which Apache can find
># meta information files. These files contain additional HTTP headers
># to include when sending the document
>#
>#MetaDir .web
>
>#
># MetaSuffix: specifies the file name suffix for the file containing the
># meta information.
>#
>#MetaSuffix .meta
>
>#
># Customizable error response (Apache style)
># these come in three flavors
>#
># 1) plain text
>#ErrorDocument 500 "The server made a boo boo.
># n.b. the single leading (") marks it as text, it does not get output
>#
># 2) local redirects
>#ErrorDocument 404 /missing.html
># to redirect to local URL /missing.html
>#ErrorDocument 404 /cgi-bin/missing_handler.pl
># N.B.: You can redirect to a script or a document using server-side-includes.
>#
># 3) external redirects
>#ErrorDocument 402 http://some.other-server.com/subscription_info.html
># N.B.: Many of the environment variables associated with the original
># request will *not* be available to such a script.
>
>#
># Customize behaviour based on the browser
>#
><IfModule mod_setenvif.c>
>
> #
> # The following directives modify normal HTTP response behavior.
> # The first directive disables keepalive for Netscape 2.x and browsers that
> # spoof it. There are known problems with these browser implementations.
> # The second directive is for Microsoft Internet Explorer 4.0b2
> # which has a broken HTTP/1.1 implementation and does not properly
> # support keepalive when it is used on 301 or 302 (redirect) responses.
> #
> BrowserMatch "Mozilla/2" nokeepalive
> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
>
> #
> # The following directive disables HTTP/1.1 responses to browsers which
> # are in violation of the HTTP/1.0 spec by not being able to grok a
> # basic 1.1 response.
> #
> BrowserMatch "RealPlayer 4\.0" force-response-1.0
> BrowserMatch "Java/1\.0" force-response-1.0
> BrowserMatch "JDK/1\.0" force-response-1.0
>
></IfModule>
># End of browser customization directives
>
>#
># Allow server status reports, with the URL of http://servername/server-status
># Change the ".your-domain.com" to match your domain to enable.
>#
># Note: apache is started (by /etc/init.d/apache) with -D STATUS if
># HTTPD_SEC_ACCESS_SERVERINFO is set to "yes" in
># /etc/sysconfig/apache.
>
><IfDefine STATUS>
><Location /server-status>
> SetHandler server-status
> Order deny,allow
> Deny from all
> Allow from localhost
></Location>
>
>#
># Allow remote server configuration reports, with the URL of
># http://servername/server-info (requires that mod_info.c be loaded).
># Change the ".your-domain.com" to match your domain to enable.
>#
><Location /server-info>
> SetHandler server-info
> Order deny,allow
> Deny from all
> Allow from localhost
></Location>
>
>#
># enable perl-status for mod_perl
>#
><IfModule mod_perl.c>
><Location /perl-status>
> SetHandler perl-script
> PerlHandler Apache::Status
> order deny,allow
> deny from all
> allow from localhost
></Location>
></IfModule>
></IfDefine>
>
>
>#
># There have been reports of people trying to abuse an old bug from pre-1.1
># days. This bug involved a CGI script distributed as a part of Apache.
># By uncommenting these lines you can redirect these attacks to a logging
># script on phf.apache.org. Or, you can record them yourself, using the script
># support/phf_abuse_log.cgi.
>#
>#<Location /cgi-bin/phf*>
># Deny from all
># ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
>#</Location>
>
>#
># Proxy Server directives. Uncomment the following lines to
># enable the proxy server:
>#
>#<IfModule mod_proxy.c>
># ProxyRequests On
>
># <Directory proxy:*>
># Order deny,allow
># Deny from all
># Allow from .your-domain.com
># </Directory>
>
> #
> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
> # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
> # Set to one of: Off | On | Full | Block
> #
># ProxyVia On
>
> #
> # To enable the cache as well, edit and uncomment the following lines:
> # (no cacheing without CacheRoot)
> #
># CacheRoot "/var/cache/http"
># CacheSize 5
># CacheGcInterval 4
># CacheMaxExpire 24
># CacheLastModifiedFactor 0.1
># CacheDefaultExpire 1
># NoCache a-domain.com another-domain.edu joes.garage-sale.com
>
>#</IfModule>
># End of proxy directives.
>
>### Section 3: Virtual Hosts
>#
># VirtualHost: If you want to maintain multiple domains/hostnames on your
># machine you can setup VirtualHost containers for them. Most configurations
># use only name-based virtual hosts so the server doesn't need to worry about
># IP addresses. This is indicated by the asterisks in the directives below.
>#
># Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
># for further details before you try to setup virtual hosts.
>#
># You may use the command line option '-S' to verify your virtual host
># configuration.
>
>#
># Use name-based virtual hosting.
>#
>#NameVirtualHost *
>
>#
># VirtualHost example:
># Almost any Apache directive may go into a VirtualHost container.
># The first VirtualHost section is used for requests without a known
># server name.
>#
>#<VirtualHost *>
># ServerAdmin webmaster@dummy-host.example.com
># DocumentRoot /www/docs/dummy-host.example.com
># ServerName dummy-host.example.com
># ErrorLog logs/dummy-host.example.com-error_log
># CustomLog logs/dummy-host.example.com-access_log common
>#</VirtualHost>
>
>#<VirtualHost _default_:*>
>#</VirtualHost>
>
>##
>## SSL Global Context
>##
>## All SSL configuration in this context applies both to
>## the main server and all SSL-enabled virtual hosts.
>##
>
>#
># Some MIME-types for downloading Certificates and CRLs
>#
><IfDefine SSL>
>AddType application/x-x509-ca-cert .crt
>AddType application/x-pkcs7-crl .crl
></IfDefine>
>
><IfModule mod_ssl.c>
>
># Pass Phrase Dialog:
># Configure the pass phrase gathering process.
># The filtering dialog program (`builtin' is a internal
># terminal dialog) has to provide the pass phrase on stdout.
>SSLPassPhraseDialog builtin
>
># Inter-Process Session Cache:
># Configure the SSL Session Cache: First the mechanism
># to use and second the expiring timeout (in seconds).
>#SSLSessionCache none
>#SSLSessionCache shmht:/var/run/ssl_scache(512000)
>#SSLSessionCache shmcb:/var/run/ssl_scache(512000)
>SSLSessionCache dbm:/var/run/ssl_scache
>SSLSessionCacheTimeout 300
>
># Semaphore:
># Configure the path to the mutual exclusion semaphore the
># SSL engine uses internally for inter-process synchronization.
>SSLMutex file:/var/run/ssl_mutex
>
># Pseudo Random Number Generator (PRNG):
># Configure one or more sources to seed the PRNG of the
># SSL library. The seed data should be of good random quality.
># WARNING! On some platforms /dev/random blocks if not enough entropy
># is available. This means you then cannot use the /dev/random device
># because it would lead to very long connection times (as long as
># it requires to make more entropy available). But usually those
># platforms additionally provide a /dev/urandom device which doesn't
># block. So, if available, use this one instead. Read the mod_ssl User
># Manual for more details.
>SSLRandomSeed startup builtin
>SSLRandomSeed connect builtin
>#SSLRandomSeed startup file:/dev/random 512
>#SSLRandomSeed startup file:/dev/urandom 512
>#SSLRandomSeed connect file:/dev/random 512
>#SSLRandomSeed connect file:/dev/urandom 512
>
># Logging:
># The home of the dedicated SSL protocol logfile. Errors are
># additionally duplicated in the general error log file. Put
># this somewhere where it cannot be used for symlink attacks on
># a real server (i.e. somewhere where only root can write).
># Log levels are (ascending order: higher ones include lower ones):
># none, error, warn, info, trace, debug.
>SSLLog /var/log/httpd/ssl_engine_log
>SSLLogLevel info
>
></IfModule>
>
><IfDefine SSL>
>
>##
>## SSL Virtual Host Context
>##
>
><VirtualHost _default_:443>
>
># General setup for the virtual host
>DocumentRoot "/srv/www/htdocs"
>ServerName new.host.name
>ServerAdmin you@your.address
>ErrorLog /var/log/httpd/error_log
>TransferLog /var/log/httpd/access_log
>
># SSL Engine Switch:
># Enable/Disable SSL for this virtual host.
>SSLEngine on
>
># SSL Cipher Suite:
># List the ciphers that the client is permitted to negotiate.
># See the mod_ssl documentation for a complete list.
>SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
>
># Server Certificate:
># Point SSLCertificateFile at a PEM encoded certificate. If
># the certificate is encrypted, then you will be prompted for a
># pass phrase. Note that a kill -HUP will prompt again. A test
># certificate can be generated with `make certificate' under
># built time. Keep in mind that if you've both a RSA and a DSA
># certificate you can configure both in parallel (to also allow
># the use of DSA ciphers, etc.)
>SSLCertificateFile /etc/httpd/ssl.crt/server.crt
>#SSLCertificateFile /etc/httpd/ssl.crt/server-dsa.crt
>
># Server Private Key:
># If the key is not combined with the certificate, use this
># directive to point at the key file. Keep in mind that if
># you've both a RSA and a DSA private key you can configure
># both in parallel (to also allow the use of DSA ciphers, etc.)
>SSLCertificateKeyFile /etc/httpd/ssl.key/server.key
>#SSLCertificateKeyFile /etc/httpd/ssl.key/server-dsa.key
>
># Server Certificate Chain:
># Point SSLCertificateChainFile at a file containing the
># concatenation of PEM encoded CA certificates which form the
># certificate chain for the server certificate. Alternatively
># the referenced file can be the same as SSLCertificateFile
># when the CA certificates are directly appended to the server
># certificate for convinience.
>#SSLCertificateChainFile /etc/httpd/ssl.crt/ca.crt
>
># Certificate Authority (CA):
># Set the CA certificate verification path where to find CA
># certificates for client authentication or alternatively one
># huge file containing all of them (file must be PEM encoded)
># Note: Inside SSLCACertificatePath you need hash symlinks
># to point to the certificate files. Use the provided
># Makefile to update the hash symlinks after changes.
>#SSLCACertificatePath /etc/httpd/ssl.crt
>#SSLCACertificateFile /etc/httpd/ssl.crt/ca-bundle.crt
>
># Certificate Revocation Lists (CRL):
># Set the CA revocation path where to find CA CRLs for client
># authentication or alternatively one huge file containing all
># of them (file must be PEM encoded)
># Note: Inside SSLCARevocationPath you need hash symlinks
># to point to the certificate files. Use the provided
># Makefile to update the hash symlinks after changes.
>#SSLCARevocationPath /etc/httpd/ssl.crl
>#SSLCARevocationFile /etc/httpd/ssl.crl/ca-bundle.crl
>
># Client Authentication (Type):
># Client certificate verification type and depth. Types are
># none, optional, require and optional_no_ca. Depth is a
># number which specifies how deeply to verify the certificate
># issuer chain before deciding the certificate is not valid.
>#SSLVerifyClient require
>#SSLVerifyDepth 10
>
># Access Control:
># With SSLRequire you can do per-directory access control based
># on arbitrary complex boolean expressions containing server
># variable checks and other lookup directives. The syntax is a
># mixture between C and Perl. See the mod_ssl documentation
># for more details.
>#<Location />
>#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
># and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
># and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
># and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
># and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
># or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
>#</Location>
>
># SSL Engine Options:
># Set various options for the SSL engine.
># o FakeBasicAuth:
># Translate the client X.509 into a Basic Authorisation. This means that
># the standard Auth/DBMAuth methods can be used for access control. The
># user name is the `one line' version of the client's X.509 certificate.
># Note that no password is obtained from the user. Every entry in the user
># file needs this password: `xxj31ZMTZzkVA'.
># o ExportCertData:
># This exports two additional environment variables: SSL_CLIENT_CERT and
># SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
># server (always existing) and the client (only existing when client
># authentication is used). This can be used to import the certificates
># into CGI scripts.
># o StdEnvVars:
># This exports the standard SSL/TLS related `SSL_*' environment variables.
># Per default this exportation is switched off for performance reasons,
># because the extraction step is an expensive operation and is usually
># useless for serving static content. So one usually enables the
># exportation for CGI and SSI requests only.
># o CompatEnvVars:
># This exports obsolete environment variables for backward compatibility
># to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
># to provide compatibility to existing CGI scripts.
># o StrictRequire:
># This denies access when "SSLRequireSSL" or "SSLRequire" applied even
># under a "Satisfy any" situation, i.e. when it applies access is denied
># and no other module can change it.
># o OptRenegotiate:
># This enables optimized SSL connection renegotiation handling when SSL
># directives are used in per-directory context.
>#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
><Files ~ "\.(cgi|shtml|phtml|php3?)$">
> SSLOptions +StdEnvVars
></Files>
><Directory "/srv/www/cgi-bin">
> SSLOptions +StdEnvVars
></Directory>
>
># SSL Protocol Adjustments:
># The safe and default but still SSL/TLS standard compliant shutdown
># approach is that mod_ssl sends the close notify alert but doesn't wait for
># the close notify alert from client. When you need a different shutdown
># approach you can use one of the following variables:
># o ssl-unclean-shutdown:
># This forces an unclean shutdown when the connection is closed, i.e. no
># SSL close notify alert is send or allowed to received. This violates
># the SSL/TLS standard but is needed for some brain-dead browsers. Use
># this when you receive I/O errors because of the standard approach where
># mod_ssl sends the close notify alert.
># o ssl-accurate-shutdown:
># This forces an accurate shutdown when the connection is closed, i.e. a
># SSL close notify alert is send and mod_ssl waits for the close notify
># alert of the client. This is 100% SSL/TLS standard compliant, but in
># practice often causes hanging connections with brain-dead browsers. Use
># this only for browsers where you know that their SSL implementation
># works correctly.
># Notice: Most problems of broken clients are also related to the HTTP
># keep-alive facility, so you usually additionally want to disable
># keep-alive for those clients, too. Use variable "nokeepalive" for this.
># Similarly, one has to force some clients to use HTTP/1.0 to workaround
># their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
># "force-response-1.0" for this.
>SetEnvIf User-Agent ".*MSIE.*" \
> nokeepalive ssl-unclean-shutdown \
> downgrade-1.0 force-response-1.0
>
># Per-Server Logging:
># The home of a custom SSL log file. Use this when you want a
># compact non-error SSL logfile on a virtual host basis.
>CustomLog /var/log/httpd/ssl_request_log \
> "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
>
></VirtualHost>
>
></IfDefine>
>
>
>
># Note:
>#
># The file that is included below is generated by SuSEconfig.
>#
># In this file, SuSEconfig puts Include statements it finds
># in /etc/httpd/modules/* (lines with "File:..." or "Include:...").
># If such a module file also contains a "Variable:..." statement, the settings
># in /etc/sysconfig/apache will be honored.
>#
># In addition, any files listed in the HTTPD_CONF_INCLUDE_FILES variable
># in /etc/sysconfig/apache will be included here by SuSEconfig.
># This allows you to add e.g. VirtualHost statements without touching
># /etc/httpd/httpd.conf itself, which means that SuSEconfig will continue doing its
># job (since it would not touch httpd.conf any longer as soon it detects changes
># made by the admin via the md5sum mechanism)
>
># Include /etc/httpd/suse_include.conf
>
>Include /home/emersonc/download/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>
>
>
>------------------------------------------------------------------------
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
--
Emerson Cargnin
Analista de Sitemas
Setor de Desenvolvimento de Sistemas - TRE-SC
tel : (048) - 251-3700 - Ramal 3181
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Emerson Cargnin <em...@tre-sc.gov.br>.
could someone send an working copy of server.xml,workers.properties and
httpd.conf ?
I need a conf with auto-conf working....
Hey john, i attached the files you ask......
I don't know why, but after changing debug direct at mod_jk.conf to
emerg it looks that even when deleting this file, tomcat generates the
conf file with emerg mode.... how i put this back? I tried to put
debug="debug" at the "<listener..." under "<Host..." but it keeps
generating emerg : )
Thanks for your help....
John Turner wrote:
>
> Are you sure you are using Apache 1.3? Apache 1 typically needs both
> LoadModule and AddModule, you can always put the AddModule directive
> into an IF statement if needed, there are several examples of this in
> a default httpd.conf file.
>
> My HOWTO doesn't say anything about AddModule because my HOWTO deals
> with Apache 2, and Apache 2 doesn't use AddModule.
>
> Regarding the Apache log error, my guess is your VirtualHosts are not
> correct, it looks like Apache is looking for numguess.jsp within its
> default DocumentRoot. In a typical, default Apache + Tomcat
> installation, it would look for numguess.jsp in
> /some/path/to/tomcat/webapps/examples/jsp. So, unless you have
> installed Tomcat in /srv/www/htdocs ($CATALINA_HOME=/srv/www/htdocs),
> something else isn't right.
>
> The "done without a worker" error is pretty self-explanatory.
>
> I'd suggest that the next step be that you post your mod_jk.conf file
> and your workers.properties file, and describe CATALINA_HOME.
>
> John
>
> On Sat, 10 May 2003 19:34:22 -0300, Emerson Cargnin
> <em...@tre-sc.gov.br> wrote:
>
>> At first thanks for your fast reply : )
>>
>> - about adding AddModule mod_jk.c (if you're using JK)
>> I thing that adding the line "LoadModule jk_module
>> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you told,
>> and your tutorial doens't say anything about this line, but apache
>> just give me the following warn telling that it's already loaded :
>>
>> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already added,
>> skipping
>>
>> - I'm almost there :). following the steps you tell at the tutorial,
>> it creates the mod_jk.conf ok, but it looks that mod_jk doesn't find
>> the webapps, although it's configured allright :
>>
>>
>> Apache log :
>> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does not
>> exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>>
>> mod_jk.log
>>
>> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
>> jk_uri_worker_map_t::map_uri_to_worker
>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]: Attempting
>> to map URI '/examples/jsp/num/numguess.jsp'
>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>
>>
>> It looks everything you said before is allright...
>> any clue?
>>
>> John Turner wrote:
>>
>>>
>>>> From comments I've received, this HOWTO is not confusing. It uses
>>>> Apache
>>>
>>>
>>> 2, but the setup is the same for Apache 1.3. It uses JK. I've
>>> never worked with SuSE, but I can't imagine it being much different
>>> than Red Hat.
>>>
>>> http://www.johnturner.com/howto/rh72-howto.html
>>>
>>> That said, I see some things with your configuration.
>>>
>>> - you need this in httpd.conf:
>>>
>>> AddModule mod_jk.c (if you're using JK)
>>>
>>> - you need a much simpler workers.properties file...dump ALL of that
>>> JNI stuff. Workers.properties shouldn't be more than this:
>>>
>>> # BEGIN workers.properties
>>> worker.list=ajp13
>>> worker.ajp13.port=8009
>>> worker.ajp13.host=localhost (or IP of Tomcat server)
>>> worker.ajp13.type=ajp13
>>> # END workers.properties
>>> - you need an additional Listener element in server.xml for EACH
>>> Host container...either you are missing it or you didn't post it.
>>> This is all described in my HOWTO.
>>>
>>> Your auto-generated mod_jk.conf file should look VERY similar to this:
>>> http://www.johnturner.com/howto/mod_jk_conf.html
>>>
>>> If it doesn't, go back and look at your server.xml and make sure
>>> your ApacheConfig Listeners are correct.
>>>
>>> John
>>>
>>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin <emerson@tre-
>>> sc.gov.br> wrote:
>>>
>>>> It has 4 days since i'm trying to get apache 1.3 to talk to tomcat
>>>> 4.1.24 through jk or jk2.
>>>> At first some questions that i haven't seem in my long search :
>>>>
>>>> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
>>>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>>>> compability with other php apps. I'd like to use the autoconf and
>>>> remote deploy feature of tomcat 4.1 (that's why i'm upgrading my
>>>> 3.2.3 production server, which works fine for jk)
>>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat
>>>> 4.1.24). I read about jk2 is better for apache 2.0, is it true?
>>>> - If does, i think i have made some mistake, because it's not
>>>> working :)
>>>>
>>>> My conf :
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> --
>>>>
>>>>
>>>> ------------------------------------
>>>> http.conf (lines added):
>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>> Include
>>>> /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> --
>>>>
>>>>
>>>> ------------------------------------
>>>> server.xml
>>>>
>>>> under "<Server port=..." i put (it's attached for better
>>>> undertanding) :
>>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>>> jdk14/conf/jk/workers.properties"
>>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> --
>>>>
>>>>
>>>> ------------------------------------
>>>> worker.properties configuration file (it's at /opt/local/jakarta-
>>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>>
>>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>>> ps=/
>>>>
>>>> worker.list=ajp13
>>>> worker.ajp13.port=8009
>>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>>> worker.ajp13.type=ajp13
>>>> worker.ajp13.lbfactor=1
>>>>
>>>> worker.loadbalancer.type=lb
>>>> worker.loadbalancer.balanced_workers=ajp13
>>>> worker.inprocess.type=jni
>>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>>> tomcat.jar
>>>> worker.inprocess.cmd_line=start
>>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>>> classic$(ps)libjvm.so
>>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>> inprocess.stdout
>>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>> inprocess.stderr
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> --
>>>>
>>>>
>>>> ------------------------------------
>>>>
>>>> here goes what happens :
>>>>
>>>> start tomcat, all ok.
>>>>
>>>> start apache, it says ok but in the log appears :
>>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory:
>>>> Error while opening the workers, jk will not work
>>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory:
>>>> Error while opening the workers, jk will not work
>>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>>> configured -- resuming normal operations
>>>>
>>>> is it necessary to do some other specific configuration?
>>>> I tried jk2 before this, but it didn't work too :(
>>>> I saw a lot of tutorials about jk and jk2, but all of them are
>>>> either confuse or don't use autoconf
>>>>
>>>> Any clue would help
>>>>
>>>> Thanks in advance
>>>>
>>>
>>>
>>>
>>
>
>
>
--
Emerson Cargnin
Analista de Sitemas
Setor de Desenvolvimento de Sistemas - TRE-SC
tel : (048) - 251-3700 - Ramal 3181
Re: connection apache 1.3 to tomcat 4.1.24
Posted by John Turner <to...@johnturner.com>.
Are you sure you are using Apache 1.3? Apache 1 typically needs both
LoadModule and AddModule, you can always put the AddModule directive into
an IF statement if needed, there are several examples of this in a default
httpd.conf file.
My HOWTO doesn't say anything about AddModule because my HOWTO deals with
Apache 2, and Apache 2 doesn't use AddModule.
Regarding the Apache log error, my guess is your VirtualHosts are not
correct, it looks like Apache is looking for numguess.jsp within its
default DocumentRoot. In a typical, default Apache + Tomcat installation,
it would look for numguess.jsp in
/some/path/to/tomcat/webapps/examples/jsp. So, unless you have installed
Tomcat in /srv/www/htdocs ($CATALINA_HOME=/srv/www/htdocs), something else
isn't right.
The "done without a worker" error is pretty self-explanatory.
I'd suggest that the next step be that you post your mod_jk.conf file and
your workers.properties file, and describe CATALINA_HOME.
John
On Sat, 10 May 2003 19:34:22 -0300, Emerson Cargnin <em...@tre-sc.gov.br>
wrote:
> At first thanks for your fast reply : )
>
> - about adding AddModule mod_jk.c (if you're using JK)
> I thing that adding the line "LoadModule jk_module
> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you told, and
> your tutorial doens't say anything about this line, but apache just give
> me the following warn telling that it's already loaded :
>
> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already added,
> skipping
>
> - I'm almost there :). following the steps you tell at the tutorial, it
> creates the mod_jk.conf ok, but it looks that mod_jk doesn't find the
> webapps, although it's configured allright :
>
>
> Apache log :
> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does not
> exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>
> mod_jk.log
>
> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
> jk_uri_worker_map_t::map_uri_to_worker
> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]: Attempting to
> map URI '/examples/jsp/num/numguess.jsp'
> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>
>
> It looks everything you said before is allright...
> any clue?
>
> John Turner wrote:
>
>>
>>> From comments I've received, this HOWTO is not confusing. It uses
>>> Apache
>>
>> 2, but the setup is the same for Apache 1.3. It uses JK. I've never
>> worked with SuSE, but I can't imagine it being much different than Red
>> Hat.
>>
>> http://www.johnturner.com/howto/rh72-howto.html
>>
>> That said, I see some things with your configuration.
>>
>> - you need this in httpd.conf:
>>
>> AddModule mod_jk.c (if you're using JK)
>>
>> - you need a much simpler workers.properties file...dump ALL of that JNI
>> stuff. Workers.properties shouldn't be more than this:
>>
>> # BEGIN workers.properties
>> worker.list=ajp13
>> worker.ajp13.port=8009
>> worker.ajp13.host=localhost (or IP of Tomcat server)
>> worker.ajp13.type=ajp13
>> # END workers.properties
>> - you need an additional Listener element in server.xml for EACH Host
>> container...either you are missing it or you didn't post it. This is
>> all described in my HOWTO.
>>
>> Your auto-generated mod_jk.conf file should look VERY similar to this:
>> http://www.johnturner.com/howto/mod_jk_conf.html
>>
>> If it doesn't, go back and look at your server.xml and make sure your
>> ApacheConfig Listeners are correct.
>>
>> John
>>
>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin <emerson@tre-
>> sc.gov.br> wrote:
>>
>>> It has 4 days since i'm trying to get apache 1.3 to talk to tomcat
>>> 4.1.24 through jk or jk2.
>>> At first some questions that i haven't seem in my long search :
>>>
>>> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
>>> In my case, I have to use apache 1.3.26 (in Suse linux) for compability
>>> with other php apps. I'd like to use the autoconf and remote deploy
>>> feature of tomcat 4.1 (that's why i'm upgrading my 3.2.3 production
>>> server, which works fine for jk)
>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat 4.1.24). I
>>> read about jk2 is better for apache 2.0, is it true?
>>> - If does, i think i have made some mistake, because it's not working
>>> :)
>>>
>>> My conf :
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> --
>>>
>>>
>>> ------------------------------------
>>> http.conf (lines added):
>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>> Include /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> --
>>>
>>>
>>> ------------------------------------
>>> server.xml
>>>
>>> under "<Server port=..." i put (it's attached for better undertanding)
>>> :
>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>> jdk14/conf/jk/workers.properties"
>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> --
>>>
>>>
>>> ------------------------------------
>>> worker.properties configuration file (it's at /opt/local/jakarta-
>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>
>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>> ps=/
>>>
>>> worker.list=ajp13
>>> worker.ajp13.port=8009
>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>> worker.ajp13.type=ajp13
>>> worker.ajp13.lbfactor=1
>>>
>>> worker.loadbalancer.type=lb
>>> worker.loadbalancer.balanced_workers=ajp13
>>> worker.inprocess.type=jni
>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>> tomcat.jar
>>> worker.inprocess.cmd_line=start
>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>> classic$(ps)libjvm.so
>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>> inprocess.stdout
>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>> inprocess.stderr
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> --
>>>
>>>
>>> ------------------------------------
>>>
>>> here goes what happens :
>>>
>>> start tomcat, all ok.
>>>
>>> start apache, it says ok but in the log appears :
>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory: Error
>>> while opening the workers, jk will not work
>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory: Error
>>> while opening the workers, jk will not work
>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>> configured -- resuming normal operations
>>>
>>> is it necessary to do some other specific configuration?
>>> I tried jk2 before this, but it didn't work too :(
>>> I saw a lot of tutorials about jk and jk2, but all of them are either
>>> confuse or don't use autoconf
>>>
>>> Any clue would help
>>>
>>> Thanks in advance
>>>
>>
>>
>>
>
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Qing Xie <xi...@ecopiabio.com>.
That means nothing has been linked between Apache and Tomcat. I guess
your virtual host configration in httpd.conf may have problems. Maybe
you can comment out other virtual hosts first and try your localhost
again. I'm not sure if this helps.
Qing
Emerson Cargnin wrote:
> hi Qing, now i found something strange :
>
> the rule map size is 0 :(
>
> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (172)]: Into
> jk_uri_worker_map_t::uri_worker_map_alloc
> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (375)]: Into
> jk_uri_worker_map_t::uri_worker_map_open
> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (396)]:
> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
> [Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (422)]:
> jk_uri_worker_map_t::uri_worker_map_open, done
> [Tue May 13 15:04:37 2003] [jk_worker.c (88)]: Into wc_open
> [Tue May 13 15:04:37 2003] [jk_worker.c (222)]: Into
> build_worker_map, creating 1 workers
> [Tue May 13 15:04:37 2003] [jk_worker.c (228)]: build_worker_map,
> creating worker ajp13
> [Tue May 13 15:04:37 2003] [jk_worker.c (148)]: Into wc_create_worker
> [Tue May 13 15:04:37 2003] [jk_worker.c (162)]: wc_create_worker,
> about to create instance ajp13 of ajp13
> [Tue May 13 15:04:37 2003] [jk_ajp13_worker.c (108)]: Into
> ajp13_worker_factory
> [Tue May 13 15:04:37 2003] [jk_worker.c (171)]: wc_create_worker,
> about to validate and init ajp13
> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1219)]: Into
> jk_worker_t::validate
> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1239)]: In
> jk_worker_t::validate for worker ajp13 contact is localhost:8009
> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1267)]: Into
> jk_worker_t::init
> [Tue May 13 15:04:37 2003] [jk_ajp_common.c (1287)]: In
> jk_worker_t::init, setting socket timeout to 0
> [Tue May 13 15:04:37 2003] [jk_worker.c (187)]: wc_create_worker, done
> [Tue May 13 15:04:37 2003] [jk_worker.c (238)]: build_worker_map,
> removing old ajp13 worker
> [Tue May 13 15:04:37 2003] [jk_worker.c (250)]: build_worker_map, done
> [Tue May 13 15:04:37 2003] [jk_worker.c (111)]: wc_open, done 1
> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (172)]: Into
> jk_uri_worker_map_t::uri_worker_map_alloc
> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (375)]: Into
> jk_uri_worker_map_t::uri_worker_map_open
> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (396)]:
> jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
> [Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (422)]:
> jk_uri_worker_map_t::uri_worker_map_open, done
> [Tue May 13 15:04:38 2003] [jk_worker.c (88)]: Into wc_open
> [Tue May 13 15:04:38 2003] [jk_worker.c (222)]: Into
> build_worker_map, creating 1 workers
> [Tue May 13 15:04:38 2003] [jk_worker.c (228)]: build_worker_map,
> creating worker ajp13
> [Tue May 13 15:04:38 2003] [jk_worker.c (148)]: Into wc_create_worker
> [Tue May 13 15:04:38 2003] [jk_worker.c (162)]: wc_create_worker,
> about to create instance ajp13 of ajp13
> [Tue May 13 15:04:38 2003] [jk_ajp13_worker.c (108)]: Into
> ajp13_worker_factory
> [Tue May 13 15:04:38 2003] [jk_worker.c (171)]: wc_create_worker,
> about to validate and init ajp13
> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1219)]: Into
> jk_worker_t::validate
> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1239)]: In
> jk_worker_t::validate for worker ajp13 contact is localhost:8009
> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1267)]: Into
> jk_worker_t::init
> [Tue May 13 15:04:38 2003] [jk_ajp_common.c (1287)]: In
> jk_worker_t::init, setting socket timeout to 0
> [Tue May 13 15:04:38 2003] [jk_worker.c (187)]: wc_create_worker, done
> [Tue May 13 15:04:38 2003] [jk_worker.c (238)]: build_worker_map,
> removing old ajp13 worker
> [Tue May 13 15:04:38 2003] [jk_worker.c (250)]: build_worker_map, done
> [Tue May 13 15:04:38 2003] [jk_worker.c (111)]: wc_open, done 1
> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (460)]: Into
> jk_uri_worker_map_t::map_uri_to_worker
> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (477)]: Attempting to
> map URI '/examples/servlet/HelloWorldExample'
> [Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (599)]:
> jk_uri_worker_map_t::map_uri_to_worker, done without a match
> [Tue May 13 15:13:11 2003] [jk_uri_worker_map.c (460)]: Into
> jk_uri_worker_map_t::map_uri_to_worker
> [Tue May 13 15:13:11 2003] [jk_uri_worker_map.c (477)]: Attempting to
> map URI '/examples/servlet/RequestHeaderExample'
> [Tue May 13 15:13:11 2003] [jk_uri_worker_map.c (599)]:
> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>
>
> Qing Xie wrote:
>
>> If you change
>>
>> "JkLogLevel emerg" to "JkLogLevel debug" in mod_jk.conf, when you
>> start tomcat, you should see something like this in mod_jk.log:
>>
>> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open, exact rule
>> /examples/jsp/security/protected/j_security_check=worker1 was added
>> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open, exact rule
>> /examples/snoop=worker1 was added
>> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (321)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open, match rule
>> /examples/servlet/=worker1 was added
>> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open, exact rule
>> /examples/CompressionTest=worker1 was added
>> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (299)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open, suffix rule
>> /examples/.jsp=worker1 was added
>> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open, exact rule
>> /examples/servletToJsp=worker1 was added
>> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open, exact rule
>> /examples/SendMailServlet=worker1 was added
>> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (408)]: Into
>> jk_uri_worker_map_t::uri_worker_map_open, there are 9 rules
>>
>> If you don't, then the mapping has problems.
>>
>> Hope this helps,
>>
>> Qing
>>
>>
>>
>> Emerson Cargnin wrote:
>>
>>> At first thanks for your fast reply : )
>>>
>>> - about adding AddModule mod_jk.c (if you're using JK)
>>> I thing that adding the line "LoadModule jk_module
>>> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you
>>> told, and your tutorial doens't say anything about this line, but
>>> apache just give me the following warn telling that it's already
>>> loaded :
>>>
>>> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already added,
>>> skipping
>>>
>>> - I'm almost there :). following the steps you tell at the tutorial,
>>> it creates the mod_jk.conf ok, but it looks that mod_jk doesn't find
>>> the webapps, although it's configured allright :
>>>
>>>
>>> Apache log :
>>> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does not
>>> exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>>>
>>> mod_jk.log
>>>
>>> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
>>> jk_uri_worker_map_t::map_uri_to_worker
>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]: Attempting
>>> to map URI '/examples/jsp/num/numguess.jsp'
>>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
>>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>>
>>>
>>> It looks everything you said before is allright...
>>> any clue?
>>>
>>> John Turner wrote:
>>>
>>>>
>>>>> From comments I've received, this HOWTO is not confusing. It uses
>>>>> Apache
>>>>
>>>>
>>>>
>>>>
>>>> 2, but the setup is the same for Apache 1.3. It uses JK. I've
>>>> never worked with SuSE, but I can't imagine it being much different
>>>> than Red Hat.
>>>>
>>>> http://www.johnturner.com/howto/rh72-howto.html
>>>>
>>>> That said, I see some things with your configuration.
>>>>
>>>> - you need this in httpd.conf:
>>>>
>>>> AddModule mod_jk.c (if you're using JK)
>>>>
>>>> - you need a much simpler workers.properties file...dump ALL of
>>>> that JNI stuff. Workers.properties shouldn't be more than this:
>>>>
>>>> # BEGIN workers.properties
>>>> worker.list=ajp13
>>>> worker.ajp13.port=8009
>>>> worker.ajp13.host=localhost (or IP of Tomcat server)
>>>> worker.ajp13.type=ajp13
>>>> # END workers.properties
>>>> - you need an additional Listener element in server.xml for EACH
>>>> Host container...either you are missing it or you didn't post it.
>>>> This is all described in my HOWTO.
>>>>
>>>> Your auto-generated mod_jk.conf file should look VERY similar to this:
>>>> http://www.johnturner.com/howto/mod_jk_conf.html
>>>>
>>>> If it doesn't, go back and look at your server.xml and make sure
>>>> your ApacheConfig Listeners are correct.
>>>>
>>>> John
>>>>
>>>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin
>>>> <em...@tre-sc.gov.br> wrote:
>>>>
>>>>> It has 4 days since i'm trying to get apache 1.3 to talk to tomcat
>>>>> 4.1.24 through jk or jk2.
>>>>> At first some questions that i haven't seem in my long search :
>>>>>
>>>>> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
>>>>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>>>>> compability with other php apps. I'd like to use the autoconf and
>>>>> remote deploy feature of tomcat 4.1 (that's why i'm upgrading my
>>>>> 3.2.3 production server, which works fine for jk)
>>>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat
>>>>> 4.1.24). I read about jk2 is better for apache 2.0, is it true?
>>>>> - If does, i think i have made some mistake, because it's not
>>>>> working :)
>>>>>
>>>>> My conf :
>>>>>
>>>>> --------------------------------------------------------------------------
>>>>>
>>>>> ------------------------------------
>>>>> http.conf (lines added):
>>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>>> Include
>>>>> /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>>
>>>>> --------------------------------------------------------------------------
>>>>>
>>>>> ------------------------------------
>>>>> server.xml
>>>>>
>>>>> under "<Server port=..." i put (it's attached for better
>>>>> undertanding):
>>>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>>>> jdk14/conf/jk/workers.properties"
>>>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>>>> --------------------------------------------------------------------------
>>>>>
>>>>> ------------------------------------
>>>>> worker.properties configuration file (it's at
>>>>> /opt/local/jakarta-
>>>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>>>
>>>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>>>> ps=/
>>>>>
>>>>> worker.list=ajp13
>>>>> worker.ajp13.port=8009
>>>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>>>> worker.ajp13.type=ajp13
>>>>> worker.ajp13.lbfactor=1
>>>>>
>>>>> worker.loadbalancer.type=lb
>>>>> worker.loadbalancer.balanced_workers=ajp13
>>>>> worker.inprocess.type=jni
>>>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>>>> tomcat.jar
>>>>> worker.inprocess.cmd_line=start
>>>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>>>> classic$(ps)libjvm.so
>>>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>> inprocess.stdout
>>>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>>> inprocess.stderr
>>>>>
>>>>> --------------------------------------------------------------------------
>>>>>
>>>>> ------------------------------------
>>>>>
>>>>> here goes what happens :
>>>>>
>>>>> start tomcat, all ok.
>>>>>
>>>>> start apache, it says ok but in the log appears :
>>>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory:
>>>>> Error while opening the workers, jk will not work
>>>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory:
>>>>> Error while opening the workers, jk will not work
>>>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>>>> configured -- resuming normal operations
>>>>>
>>>>> is it necessary to do some other specific configuration?
>>>>> I tried jk2 before this, but it didn't work too :(
>>>>> I saw a lot of tutorials about jk and jk2, but all of them are
>>>>> either confuse or don't use autoconf
>>>>>
>>>>> Any clue would help
>>>>>
>>>>> Thanks in advance
>>>>>
>>>>
>>>>
>>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> ########## Auto generated on Thu Aug 16 00:00:09 ART 2001##########
>>>
>>> <IfModule !mod_jk.c>
>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>> </IfModule>
>>>
>>> JkWorkersFile
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>>> JkLogFile "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>>>
>>> JkLogLevel emerg
>>>
>>>
>>>
>>> <VirtualHost localhost>
>>> ServerName localhost
>>>
>>> #################### localhost:/admin ####################
>>>
>>> # Static files Alias /admin
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin"
>>>
>>>
>>> <Directory
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin">
>>>
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/admin/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/admin/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /admin/j_security_check ajp13
>>> JkMount /admin/*.do ajp13
>>> JkMount /admin/*.jsp ajp13
>>>
>>> #################### localhost:/webdav ####################
>>>
>>> # Static files Alias /webdav
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav"
>>>
>>> <Directory
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav">
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.jsp index.html index.htm </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/webdav/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/webdav/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /webdav/*.jsp ajp13
>>>
>>> #################### localhost:/examples ####################
>>>
>>> # Static files Alias /examples
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples"
>>>
>>> <Directory
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples">
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/examples/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/examples/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /examples/jsp/security/protected/j_security_check ajp13
>>> JkMount /examples/snoop ajp13
>>> JkMount /examples/servlet/* ajp13
>>> JkMount /examples/CompressionTest ajp13
>>> JkMount /examples/*.jsp ajp13
>>> JkMount /examples/servletToJsp ajp13
>>> JkMount /examples/SendMailServlet ajp13
>>>
>>> #################### localhost:/tomcat-docs ####################
>>>
>>> # Static files Alias /tomcat-docs
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs"
>>>
>>> <Directory
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs">
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/tomcat-docs/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/tomcat-docs/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /tomcat-docs/*.jsp ajp13
>>>
>>> #################### localhost:/manager ####################
>>>
>>> # Static files Alias /manager
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager"
>>>
>>>
>>> <Directory
>>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager">
>>>
>>> Options Indexes FollowSymLinks
>>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>>
>>>
>>> # Deny direct access to WEB-INF and META-INF
>>> #
>>> <Location "/manager/WEB-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> <Location "/manager/META-INF/*">
>>> AllowOverride None
>>> deny from all
>>> </Location>
>>>
>>> JkMount /manager/list ajp13
>>> JkMount /manager/serverinfo ajp13
>>> JkMount /manager/deploy ajp13
>>> JkMount /manager/sessions ajp13
>>> JkMount /manager/reload ajp13
>>> JkMount /manager/html/* ajp13
>>> JkMount /manager/resources ajp13
>>> JkMount /manager/start ajp13
>>> JkMount /manager/stop ajp13
>>> JkMount /manager/install ajp13
>>> JkMount /manager/*.jsp ajp13
>>> JkMount /manager/roles ajp13
>>> JkMount /manager/remove ajp13
>>> JkMount /manager/undeploy ajp13
>>> </VirtualHost>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> <!-- Example Server Configuration File -->
>>> <!-- Note that component elements are nested corresponding to their
>>> parent-child relationships with each other -->
>>>
>>> <!-- A "Server" is a singleton element that represents the entire JVM,
>>> which may contain one or more "Service" instances. The Server
>>> listens for a shutdown command on the indicated port.
>>>
>>> Note: A "Server" is not itself a "Container", so you may not
>>> define subcomponents such as "Valves" or "Loggers" at this level.
>>> -->
>>>
>>> <Server name="localhost" port="8005" shutdown="SHUTDOWN" debug="0">
>>>
>>>
>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>> modJk="/usr/lib/apache/mod_jk.so" />
>>>
>>>
>>> <!-- Comment these entries out to disable JMX MBeans support -->
>>> <!-- You may also configure custom components (e.g. Valves/Realms)
>>> by including your own mbean-descriptor file(s), and setting
>>> the "descriptors" attribute to point to a ';' seperated list
>>> of paths
>>> (in the ClassLoader sense) of files to add to the default list.
>>> e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
>>> -->
>>> <!-- Listener
>>> className="org.apache.catalina.mbeans.ServerLifecycleListener"
>>> debug="0"/>
>>> <Listener
>>> className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
>>> debug="0"/ -->
>>>
>>> <!-- Global JNDI resources -->
>>> <GlobalNamingResources>
>>>
>>> <!-- Test entry for demonstration purposes -->
>>> <Environment name="simpleValue" type="java.lang.Integer"
>>> value="30"/>
>>>
>>> <!-- Editable user database that can also be used by
>>> UserDatabaseRealm to authenticate users -->
>>> <Resource name="UserDatabase" auth="Container"
>>> type="org.apache.catalina.UserDatabase"
>>> description="User database that can be updated and saved">
>>> </Resource>
>>> <ResourceParams name="UserDatabase">
>>> <parameter>
>>> <name>factory</name>
>>>
>>> <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
>>> </parameter>
>>> <parameter>
>>> <name>pathname</name>
>>> <value>conf/tomcat-users.xml</value>
>>> </parameter>
>>> </ResourceParams>
>>>
>>> </GlobalNamingResources>
>>>
>>> <!-- A "Service" is a collection of one or more "Connectors" that
>>> share
>>> a single "Container" (and therefore the web applications visible
>>> within that Container). Normally, that Container is an "Engine",
>>> but this is not required.
>>>
>>> Note: A "Service" is not itself a "Container", so you may not
>>> define subcomponents such as "Valves" or "Loggers" at this level.
>>> -->
>>>
>>> <!-- Define the Tomcat Stand-Alone Service -->
>>> <Service name="Tomcat-Standalone">
>>>
>>> <!-- A "Connector" represents an endpoint by which requests are
>>> received
>>> and responses are returned. Each Connector passes requests
>>> on to the
>>> associated "Container" (normally an Engine) for processing.
>>>
>>> By default, a non-SSL HTTP/1.1 Connector is established on
>>> port 8080.
>>> You can also enable an SSL HTTP/1.1 Connector on port 8443 by
>>> following the instructions below and uncommenting the second
>>> Connector
>>> entry. SSL support requires the following steps (see the
>>> SSL Config
>>> HOWTO in the Tomcat 4.0 documentation bundle for more detailed
>>> instructions):
>>> * Download and install JSSE 1.0.2 or later, and put the JAR
>>> files
>>> into "$JAVA_HOME/jre/lib/ext".
>>> * Execute:
>>> %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg
>>> RSA (Windows)
>>> $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg
>>> RSA (Unix)
>>> with a password value of "changeit" for both the
>>> certificate and
>>> the keystore itself.
>>>
>>> By default, DNS lookups are enabled when a web application
>>> calls
>>> request.getRemoteHost(). This can have an adverse impact on
>>> performance, so you can disable it by setting the
>>> "enableLookups" attribute to "false". When DNS lookups are
>>> disabled,
>>> request.getRemoteHost() will return the String version of the
>>> IP address of the remote client.
>>> -->
>>>
>>> <!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
>>> <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>>> port="8080" minProcessors="5" maxProcessors="75"
>>> enableLookups="true" redirectPort="8443"
>>> acceptCount="100" debug="0" connectionTimeout="20000"
>>> useURIValidationHack="false"
>>> disableUploadTimeout="true" />
>>> <!-- Note : To disable connection timeouts, set connectionTimeout
>>> value to -1 -->
>>>
>>> <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
>>> <!--
>>> <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>>> port="8443" minProcessors="5" maxProcessors="75"
>>> enableLookups="true"
>>> acceptCount="100" debug="0" scheme="https" secure="true"
>>> useURIValidationHack="false" disableUploadTimeout="true">
>>> <Factory
>>> className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
>>> clientAuth="false" protocol="TLS" />
>>> </Connector>
>>> -->
>>>
>>> <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
>>> <!-- Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>>> port="8009" minProcessors="5" maxProcessors="75"
>>> enableLookups="true" redirectPort="8443"
>>> acceptCount="10" debug="0" connectionTimeout="0"
>>> useURIValidationHack="false"
>>>
>>> protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/-->
>>>
>>> <!-- Define an AJP 1.3 Connector on port 8009 -->
>>> <Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
>>> port="8009" minProcessors="5" maxProcessors="75"
>>> acceptCount="10" debug="0"/>
>>> <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
>>> <!-- See proxy documentation for more information about using
>>> this. -->
>>> <!--
>>> <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>>> port="8082" minProcessors="5" maxProcessors="75"
>>> enableLookups="true"
>>> acceptCount="100" debug="0" connectionTimeout="20000"
>>> proxyPort="80" useURIValidationHack="false"
>>> disableUploadTimeout="true" />
>>> -->
>>>
>>> <!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083
>>> -->
>>> <!--
>>> <Connector
>>> className="org.apache.catalina.connector.http.HttpConnector"
>>> port="8083" minProcessors="5" maxProcessors="75"
>>> enableLookups="true" redirectPort="8443"
>>> acceptCount="10" debug="0" />
>>> -->
>>>
>>> <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
>>> <!--
>>> <Connector
>>> className="org.apache.catalina.connector.http10.HttpConnector"
>>> port="8084" minProcessors="5" maxProcessors="75"
>>> enableLookups="true" redirectPort="8443"
>>> acceptCount="10" debug="0" />
>>> -->
>>>
>>> <!-- An Engine represents the entry point (within Catalina) that
>>> processes
>>> every request. The Engine implementation for Tomcat stand
>>> alone
>>> analyzes the HTTP headers included with the request, and
>>> passes them
>>> on to the appropriate Host (virtual host). -->
>>>
>>> <!-- You should set jvmRoute to support load-balancing via JK/JK2
>>> ie :
>>> <Engine name="Standalone" defaultHost="localhost" debug="0"
>>> jmvRoute="jvm1"> --> <!-- Define the top level
>>> container in our container hierarchy -->
>>> <Engine name="Standalone" defaultHost="localhost" debug="0">
>>>
>>> <!-- The request dumper valve dumps useful debugging
>>> information about
>>> the request headers and cookies that were received, and
>>> the response
>>> headers and cookies that were sent, for all requests
>>> received by
>>> this instance of Tomcat. If you care only about requests
>>> to a
>>> particular virtual host, or a particular application, nest
>>> this
>>> element inside the corresponding <Host> or <Context> entry
>>> instead.
>>>
>>> For a similar mechanism that is portable to all Servlet 2.3
>>> containers, check out the "RequestDumperFilter" Filter in the
>>> example application (the source for this filter may be
>>> found in
>>> "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
>>>
>>> Request dumping is disabled by default. Uncomment the
>>> following
>>> element to enable it. -->
>>> <!--
>>> <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
>>> -->
>>>
>>> <!-- Global logger unless overridden at lower levels -->
>>> <Logger className="org.apache.catalina.logger.FileLogger"
>>> prefix="catalina_log." suffix=".txt"
>>> timestamp="true"/>
>>>
>>> <!-- Because this Realm is here, an instance will be shared
>>> globally -->
>>>
>>> <!-- This Realm uses the UserDatabase configured in the global
>>> JNDI
>>> resources under the key "UserDatabase". Any edits
>>> that are performed against this UserDatabase are immediately
>>> available for use by the Realm. -->
>>> <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
>>> debug="0" resourceName="UserDatabase"/>
>>>
>>> <!-- Comment out the old realm but leave here for now in case we
>>> need to go back quickly -->
>>> <!--
>>> <Realm className="org.apache.catalina.realm.MemoryRealm" />
>>> -->
>>>
>>> <!-- Replace the above Realm with one of the following to get a
>>> Realm
>>> stored in a database and accessed via JDBC -->
>>>
>>> <!--
>>> <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
>>> driverName="org.gjt.mm.mysql.Driver"
>>> connectionURL="jdbc:mysql://localhost/authority"
>>> connectionName="test" connectionPassword="test"
>>> userTable="users" userNameCol="user_name"
>>> userCredCol="user_pass"
>>> userRoleTable="user_roles" roleNameCol="role_name" />
>>> -->
>>>
>>> <!--
>>> <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
>>> driverName="oracle.jdbc.driver.OracleDriver"
>>> connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
>>> connectionName="scott" connectionPassword="tiger"
>>> userTable="users" userNameCol="user_name"
>>> userCredCol="user_pass"
>>> userRoleTable="user_roles" roleNameCol="role_name" />
>>> -->
>>>
>>> <!--
>>> <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
>>> driverName="sun.jdbc.odbc.JdbcOdbcDriver"
>>> connectionURL="jdbc:odbc:CATALINA"
>>> userTable="users" userNameCol="user_name"
>>> userCredCol="user_pass"
>>> userRoleTable="user_roles" roleNameCol="role_name" />
>>> -->
>>>
>>> <!-- Define the default virtual host -->
>>> <Host name="localhost" debug="0" appBase="webapps"
>>> unpackWARs="true" autoDeploy="true">
>>> <Listener
>>> className="org.apache.ajp.tomcat4.config.ApacheConfig" append="true"
>>> forwardAll="false" modJk="/usr/local/apache2/modules/mod_jk.so" />
>>>
>>>
>>>
>>>
>>> <!-- Normally, users must authenticate themselves to each web
>>> app
>>> individually. Uncomment the following entry if you
>>> would like
>>> a user to be authenticated the first time they encounter a
>>> resource protected by a security constraint, and then
>>> have that
>>> user identity maintained across *all* web applications
>>> contained
>>> in this virtual host. -->
>>> <!--
>>> <Valve
>>> className="org.apache.catalina.authenticator.SingleSignOn"
>>> debug="0"/>
>>> -->
>>>
>>> <!-- Access log processes all requests for this virtual
>>> host. By
>>> default, log files are created in the "logs" directory
>>> relative to
>>> $CATALINA_HOME. If you wish, you can specify a different
>>> directory with the "directory" attribute. Specify
>>> either a relative
>>> (to $CATALINA_HOME) or absolute path to the desired
>>> directory.
>>> -->
>>> <!--
>>> <Valve className="org.apache.catalina.valves.AccessLogValve"
>>> directory="logs" prefix="localhost_access_log."
>>> suffix=".txt"
>>> pattern="common" resolveHosts="false"/>
>>> -->
>>>
>>> <!-- Logger shared by all Contexts related to this virtual
>>> host. By
>>> default (when using FileLogger), log files are created
>>> in the "logs"
>>> directory relative to $CATALINA_HOME. If you wish, you
>>> can specify
>>> a different directory with the "directory" attribute.
>>> Specify either a
>>> relative (to $CATALINA_HOME) or absolute path to the
>>> desired
>>> directory.-->
>>> <Logger className="org.apache.catalina.logger.FileLogger"
>>> directory="logs" prefix="localhost_log." suffix=".txt"
>>> timestamp="true"/>
>>>
>>> <!-- Define properties for each web application. This is
>>> only needed
>>> if you want to set non-default properties, or have web
>>> application
>>> document roots in places other than the virtual host's
>>> appBase
>>> directory. -->
>>>
>>> <!-- Tomcat Root Context -->
>>> <!--
>>> <Context path="" docBase="ROOT" debug="0"/>
>>> -->
>>>
>>> <!-- Tomcat Examples Context -->
>>> <Context path="/examples" docBase="examples" debug="0"
>>> reloadable="true" crossContext="true">
>>> <Logger className="org.apache.catalina.logger.FileLogger"
>>> prefix="localhost_examples_log." suffix=".txt"
>>> timestamp="true"/>
>>> <Ejb name="ejb/EmplRecord" type="Entity"
>>> home="com.wombat.empl.EmployeeRecordHome"
>>> remote="com.wombat.empl.EmployeeRecord"/>
>>>
>>> <!-- If you wanted the examples app to be able to edit the
>>> user database, you would uncomment the following entry.
>>> Of course, you would want to enable security on the
>>> application as well, so this is not done by default!
>>> The database object could be accessed like this:
>>>
>>> Context initCtx = new InitialContext();
>>> Context envCtx = (Context)
>>> initCtx.lookup("java:comp/env");
>>> UserDatabase database =
>>> (UserDatabase) envCtx.lookup("userDatabase");
>>> -->
>>> <!--
>>> <ResourceLink name="userDatabase" global="UserDatabase"
>>> type="org.apache.catalina.UserDatabase"/>
>>> -->
>>>
>>>
>>> <!-- PersistentManager: Uncomment the section below to test
>>> Persistent Sessions.
>>> saveOnRestart: If true, all
>>> active sessions will be saved
>>> to the Store when Catalina is shutdown, regardless of
>>> other settings. All Sessions found in the Store will
>>> be loaded on startup. Sessions past their expiration
>>> are
>>> ignored in both cases.
>>> maxActiveSessions: If 0 or greater, having too many
>>> active sessions will result in some being swapped
>>> out. minIdleSwap
>>> limits this. -1 or 0 means unlimited sessions are
>>> allowed.
>>> If it is not possible to swap sessions new sessions
>>> will
>>> be rejected.
>>> This avoids thrashing when the site is highly active.
>>> minIdleSwap: Sessions must be idle for at least this long
>>> (in seconds) before they will be swapped out due to
>>> activity.
>>> 0 means sessions will almost always be swapped out
>>> after
>>> use - this will be noticeably slow for your users.
>>> maxIdleSwap: Sessions will be swapped out if idle for
>>> this
>>> long (in seconds). If minIdleSwap is higher, then it
>>> will
>>> override this. This isn't exact: it is checked
>>> periodically.
>>> -1 means sessions won't be swapped out for this reason,
>>> although they may be swapped out for maxActiveSessions.
>>> If set to >= 0, guarantees that all sessions found
>>> in the
>>> Store will be loaded on startup.
>>> maxIdleBackup: Sessions will be backed up (saved to
>>> the Store,
>>> but left in active memory) if idle for this long (in
>>> seconds), and all sessions found in the Store will
>>> be loaded on startup.
>>> If set to -1 sessions will not be backed up, 0 means
>>> they
>>> should be backed up shortly after being used.
>>>
>>> To clear sessions from the Store, set
>>> maxActiveSessions, maxIdleSwap,
>>> and minIdleBackup all to -1, saveOnRestart to false,
>>> then restart Catalina.
>>> -->
>>> <!--
>>> <Manager
>>> className="org.apache.catalina.session.PersistentManager"
>>> debug="0"
>>> saveOnRestart="true"
>>> maxActiveSessions="-1"
>>> minIdleSwap="-1"
>>> maxIdleSwap="-1"
>>> maxIdleBackup="-1">
>>> <Store
>>> className="org.apache.catalina.session.FileStore"/>
>>> </Manager>
>>> -->
>>> <Environment name="maxExemptions" type="java.lang.Integer"
>>> value="15"/>
>>> <Parameter name="context.param.name"
>>> value="context.param.value"
>>> override="false"/>
>>> <Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
>>> type="javax.sql.DataSource"/>
>>> <ResourceParams name="jdbc/EmployeeAppDb">
>>> <parameter><name>username</name><value>sa</value></parameter>
>>> <parameter><name>password</name><value></value></parameter>
>>> <parameter><name>driverClassName</name>
>>> <value>org.hsql.jdbcDriver</value></parameter>
>>> <parameter><name>url</name>
>>> <value>jdbc:HypersonicSQL:database</value></parameter>
>>> </ResourceParams>
>>> <Resource name="mail/Session" auth="Container"
>>> type="javax.mail.Session"/>
>>> <ResourceParams name="mail/Session">
>>> <parameter>
>>> <name>mail.smtp.host</name>
>>> <value>localhost</value>
>>> </parameter>
>>> </ResourceParams>
>>> <ResourceLink
>>> name="linkToGlobalResource" global="simpleValue"
>>> type="java.lang.Integer"/>
>>> </Context>
>>>
>>> </Host>
>>>
>>> </Engine>
>>>
>>> </Service>
>>>
>>> <!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with
>>> Tomcat 4.0
>>> as its servlet container. Please read the README.txt file
>>> coming with
>>> the WebApp Module distribution on how to build it.
>>> (Or check out the "jakarta-tomcat-connectors/webapp" CVS
>>> repository)
>>>
>>> To configure the Apache side, you must ensure that you have the
>>> "ServerName" and "Port" directives defined in "httpd.conf".
>>> Then,
>>> lines like these to the bottom of your "httpd.conf" file:
>>>
>>> LoadModule webapp_module libexec/mod_webapp.so
>>> WebAppConnection warpConnection warp localhost:8008
>>> WebAppDeploy examples warpConnection /examples/
>>>
>>> The next time you restart Apache (after restarting Tomcat, if
>>> needed)
>>> the connection will be established, and all applications you make
>>> visible via "WebAppDeploy" directives can be accessed through
>>> Apache.
>>> -->
>>>
>>> <!-- Define an Apache-Connector Service -->
>>> <!--
>>> <Service name="Tomcat-Apache">
>>>
>>> <Connector
>>> className="org.apache.catalina.connector.warp.WarpConnector"
>>> port="8008" minProcessors="5" maxProcessors="75"
>>> enableLookups="true" appBase="webapps"
>>> acceptCount="10" debug="0"/>
>>>
>>> <Engine className="org.apache.catalina.connector.warp.WarpEngine"
>>> name="Apache" debug="0">
>>>
>>> <Logger className="org.apache.catalina.logger.FileLogger"
>>> prefix="apache_log." suffix=".txt"
>>> timestamp="true"/>
>>>
>>> <Realm className="org.apache.catalina.realm.MemoryRealm" />
>>>
>>> </Engine>
>>>
>>> </Service>
>>> -->
>>>
>>> </Server>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>>
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Emerson Cargnin <em...@tre-sc.gov.br>.
hi Qing, now i found something strange :
the rule map size is 0 :(
[Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (172)]: Into
jk_uri_worker_map_t::uri_worker_map_alloc
[Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (375)]: Into
jk_uri_worker_map_t::uri_worker_map_open
[Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (396)]:
jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
[Tue May 13 15:04:37 2003] [jk_uri_worker_map.c (422)]:
jk_uri_worker_map_t::uri_worker_map_open, done
[Tue May 13 15:04:37 2003] [jk_worker.c (88)]: Into wc_open
[Tue May 13 15:04:37 2003] [jk_worker.c (222)]: Into build_worker_map,
creating 1 workers
[Tue May 13 15:04:37 2003] [jk_worker.c (228)]: build_worker_map,
creating worker ajp13
[Tue May 13 15:04:37 2003] [jk_worker.c (148)]: Into wc_create_worker
[Tue May 13 15:04:37 2003] [jk_worker.c (162)]: wc_create_worker, about
to create instance ajp13 of ajp13
[Tue May 13 15:04:37 2003] [jk_ajp13_worker.c (108)]: Into
ajp13_worker_factory
[Tue May 13 15:04:37 2003] [jk_worker.c (171)]: wc_create_worker, about
to validate and init ajp13
[Tue May 13 15:04:37 2003] [jk_ajp_common.c (1219)]: Into
jk_worker_t::validate
[Tue May 13 15:04:37 2003] [jk_ajp_common.c (1239)]: In
jk_worker_t::validate for worker ajp13 contact is localhost:8009
[Tue May 13 15:04:37 2003] [jk_ajp_common.c (1267)]: Into jk_worker_t::init
[Tue May 13 15:04:37 2003] [jk_ajp_common.c (1287)]: In
jk_worker_t::init, setting socket timeout to 0
[Tue May 13 15:04:37 2003] [jk_worker.c (187)]: wc_create_worker, done
[Tue May 13 15:04:37 2003] [jk_worker.c (238)]: build_worker_map,
removing old ajp13 worker
[Tue May 13 15:04:37 2003] [jk_worker.c (250)]: build_worker_map, done
[Tue May 13 15:04:37 2003] [jk_worker.c (111)]: wc_open, done 1
[Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (172)]: Into
jk_uri_worker_map_t::uri_worker_map_alloc
[Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (375)]: Into
jk_uri_worker_map_t::uri_worker_map_open
[Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (396)]:
jk_uri_worker_map_t::uri_worker_map_open, rule map size is 0
[Tue May 13 15:04:38 2003] [jk_uri_worker_map.c (422)]:
jk_uri_worker_map_t::uri_worker_map_open, done
[Tue May 13 15:04:38 2003] [jk_worker.c (88)]: Into wc_open
[Tue May 13 15:04:38 2003] [jk_worker.c (222)]: Into build_worker_map,
creating 1 workers
[Tue May 13 15:04:38 2003] [jk_worker.c (228)]: build_worker_map,
creating worker ajp13
[Tue May 13 15:04:38 2003] [jk_worker.c (148)]: Into wc_create_worker
[Tue May 13 15:04:38 2003] [jk_worker.c (162)]: wc_create_worker, about
to create instance ajp13 of ajp13
[Tue May 13 15:04:38 2003] [jk_ajp13_worker.c (108)]: Into
ajp13_worker_factory
[Tue May 13 15:04:38 2003] [jk_worker.c (171)]: wc_create_worker, about
to validate and init ajp13
[Tue May 13 15:04:38 2003] [jk_ajp_common.c (1219)]: Into
jk_worker_t::validate
[Tue May 13 15:04:38 2003] [jk_ajp_common.c (1239)]: In
jk_worker_t::validate for worker ajp13 contact is localhost:8009
[Tue May 13 15:04:38 2003] [jk_ajp_common.c (1267)]: Into jk_worker_t::init
[Tue May 13 15:04:38 2003] [jk_ajp_common.c (1287)]: In
jk_worker_t::init, setting socket timeout to 0
[Tue May 13 15:04:38 2003] [jk_worker.c (187)]: wc_create_worker, done
[Tue May 13 15:04:38 2003] [jk_worker.c (238)]: build_worker_map,
removing old ajp13 worker
[Tue May 13 15:04:38 2003] [jk_worker.c (250)]: build_worker_map, done
[Tue May 13 15:04:38 2003] [jk_worker.c (111)]: wc_open, done 1
[Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (460)]: Into
jk_uri_worker_map_t::map_uri_to_worker
[Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (477)]: Attempting to
map URI '/examples/servlet/HelloWorldExample'
[Tue May 13 15:04:59 2003] [jk_uri_worker_map.c (599)]:
jk_uri_worker_map_t::map_uri_to_worker, done without a match
[Tue May 13 15:13:11 2003] [jk_uri_worker_map.c (460)]: Into
jk_uri_worker_map_t::map_uri_to_worker
[Tue May 13 15:13:11 2003] [jk_uri_worker_map.c (477)]: Attempting to
map URI '/examples/servlet/RequestHeaderExample'
[Tue May 13 15:13:11 2003] [jk_uri_worker_map.c (599)]:
jk_uri_worker_map_t::map_uri_to_worker, done without a match
Qing Xie wrote:
> If you change
>
> "JkLogLevel emerg" to "JkLogLevel debug" in mod_jk.conf, when you
> start tomcat, you should see something like this in mod_jk.log:
>
> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
> jk_uri_worker_map_t::uri_worker_map_open, exact rule
> /examples/jsp/security/protected/j_security_check=worker1 was added
> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
> jk_uri_worker_map_t::uri_worker_map_open, exact rule
> /examples/snoop=worker1 was added
> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (321)]: Into
> jk_uri_worker_map_t::uri_worker_map_open, match rule
> /examples/servlet/=worker1 was added
> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
> jk_uri_worker_map_t::uri_worker_map_open, exact rule
> /examples/CompressionTest=worker1 was added
> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (299)]: Into
> jk_uri_worker_map_t::uri_worker_map_open, suffix rule
> /examples/.jsp=worker1 was added
> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
> jk_uri_worker_map_t::uri_worker_map_open, exact rule
> /examples/servletToJsp=worker1 was added
> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into
> jk_uri_worker_map_t::uri_worker_map_open, exact rule
> /examples/SendMailServlet=worker1 was added
> [Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (408)]: Into
> jk_uri_worker_map_t::uri_worker_map_open, there are 9 rules
>
> If you don't, then the mapping has problems.
>
> Hope this helps,
>
> Qing
>
>
>
> Emerson Cargnin wrote:
>
>> At first thanks for your fast reply : )
>>
>> - about adding AddModule mod_jk.c (if you're using JK)
>> I thing that adding the line "LoadModule jk_module
>> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you told,
>> and your tutorial doens't say anything about this line, but apache
>> just give me the following warn telling that it's already loaded :
>>
>> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already added,
>> skipping
>>
>> - I'm almost there :). following the steps you tell at the tutorial,
>> it creates the mod_jk.conf ok, but it looks that mod_jk doesn't find
>> the webapps, although it's configured allright :
>>
>>
>> Apache log :
>> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does not
>> exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>>
>> mod_jk.log
>>
>> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
>> jk_uri_worker_map_t::map_uri_to_worker
>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]: Attempting
>> to map URI '/examples/jsp/num/numguess.jsp'
>> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
>> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>>
>>
>> It looks everything you said before is allright...
>> any clue?
>>
>> John Turner wrote:
>>
>>>
>>>> From comments I've received, this HOWTO is not confusing. It uses
>>>> Apache
>>>
>>>
>>>
>>> 2, but the setup is the same for Apache 1.3. It uses JK. I've
>>> never worked with SuSE, but I can't imagine it being much different
>>> than Red Hat.
>>>
>>> http://www.johnturner.com/howto/rh72-howto.html
>>>
>>> That said, I see some things with your configuration.
>>>
>>> - you need this in httpd.conf:
>>>
>>> AddModule mod_jk.c (if you're using JK)
>>>
>>> - you need a much simpler workers.properties file...dump ALL of that
>>> JNI stuff. Workers.properties shouldn't be more than this:
>>>
>>> # BEGIN workers.properties
>>> worker.list=ajp13
>>> worker.ajp13.port=8009
>>> worker.ajp13.host=localhost (or IP of Tomcat server)
>>> worker.ajp13.type=ajp13
>>> # END workers.properties
>>> - you need an additional Listener element in server.xml for EACH
>>> Host container...either you are missing it or you didn't post it.
>>> This is all described in my HOWTO.
>>>
>>> Your auto-generated mod_jk.conf file should look VERY similar to this:
>>> http://www.johnturner.com/howto/mod_jk_conf.html
>>>
>>> If it doesn't, go back and look at your server.xml and make sure
>>> your ApacheConfig Listeners are correct.
>>>
>>> John
>>>
>>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin
>>> <em...@tre-sc.gov.br> wrote:
>>>
>>>> It has 4 days since i'm trying to get apache 1.3 to talk to tomcat
>>>> 4.1.24 through jk or jk2.
>>>> At first some questions that i haven't seem in my long search :
>>>>
>>>> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
>>>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>>>> compability with other php apps. I'd like to use the autoconf and
>>>> remote deploy feature of tomcat 4.1 (that's why i'm upgrading my
>>>> 3.2.3 production server, which works fine for jk)
>>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat
>>>> 4.1.24). I read about jk2 is better for apache 2.0, is it true?
>>>> - If does, i think i have made some mistake, because it's not
>>>> working :)
>>>>
>>>> My conf :
>>>>
>>>> --------------------------------------------------------------------------
>>>>
>>>>
>>>> ------------------------------------
>>>> http.conf (lines added):
>>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>>> Include
>>>> /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>>
>>>> --------------------------------------------------------------------------
>>>>
>>>>
>>>> ------------------------------------
>>>> server.xml
>>>>
>>>> under "<Server port=..." i put (it's attached for better
>>>> undertanding):
>>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>>> jdk14/conf/jk/workers.properties"
>>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>>> --------------------------------------------------------------------------
>>>>
>>>>
>>>> ------------------------------------
>>>> worker.properties configuration file (it's at /opt/local/jakarta-
>>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>>
>>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>>> ps=/
>>>>
>>>> worker.list=ajp13
>>>> worker.ajp13.port=8009
>>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>>> worker.ajp13.type=ajp13
>>>> worker.ajp13.lbfactor=1
>>>>
>>>> worker.loadbalancer.type=lb
>>>> worker.loadbalancer.balanced_workers=ajp13
>>>> worker.inprocess.type=jni
>>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>>> tomcat.jar
>>>> worker.inprocess.cmd_line=start
>>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>>> classic$(ps)libjvm.so
>>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>> inprocess.stdout
>>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>>> inprocess.stderr
>>>>
>>>> --------------------------------------------------------------------------
>>>>
>>>>
>>>> ------------------------------------
>>>>
>>>> here goes what happens :
>>>>
>>>> start tomcat, all ok.
>>>>
>>>> start apache, it says ok but in the log appears :
>>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory:
>>>> Error while opening the workers, jk will not work
>>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory:
>>>> Error while opening the workers, jk will not work
>>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>>> configured -- resuming normal operations
>>>>
>>>> is it necessary to do some other specific configuration?
>>>> I tried jk2 before this, but it didn't work too :(
>>>> I saw a lot of tutorials about jk and jk2, but all of them are
>>>> either confuse or don't use autoconf
>>>>
>>>> Any clue would help
>>>>
>>>> Thanks in advance
>>>>
>>>
>>>
>>>
>>
>> ------------------------------------------------------------------------
>>
>> ########## Auto generated on Thu Aug 16 00:00:09 ART 2001##########
>>
>> <IfModule !mod_jk.c>
>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>> </IfModule>
>>
>> JkWorkersFile
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>> JkLogFile "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>>
>> JkLogLevel emerg
>>
>>
>>
>> <VirtualHost localhost>
>> ServerName localhost
>>
>> #################### localhost:/admin ####################
>>
>> # Static files Alias /admin
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin"
>>
>>
>> <Directory
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin">
>>
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/admin/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/admin/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /admin/j_security_check ajp13
>> JkMount /admin/*.do ajp13
>> JkMount /admin/*.jsp ajp13
>>
>> #################### localhost:/webdav ####################
>>
>> # Static files Alias /webdav
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav"
>>
>> <Directory
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav">
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.jsp index.html index.htm </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/webdav/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/webdav/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /webdav/*.jsp ajp13
>>
>> #################### localhost:/examples ####################
>>
>> # Static files Alias /examples
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples"
>>
>> <Directory
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples">
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/examples/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/examples/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /examples/jsp/security/protected/j_security_check ajp13
>> JkMount /examples/snoop ajp13
>> JkMount /examples/servlet/* ajp13
>> JkMount /examples/CompressionTest ajp13
>> JkMount /examples/*.jsp ajp13
>> JkMount /examples/servletToJsp ajp13
>> JkMount /examples/SendMailServlet ajp13
>>
>> #################### localhost:/tomcat-docs ####################
>>
>> # Static files Alias /tomcat-docs
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs"
>>
>> <Directory
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs">
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/tomcat-docs/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/tomcat-docs/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /tomcat-docs/*.jsp ajp13
>>
>> #################### localhost:/manager ####################
>>
>> # Static files Alias /manager
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager"
>>
>>
>> <Directory
>> "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager">
>>
>> Options Indexes FollowSymLinks
>> DirectoryIndex index.html index.htm index.jsp </Directory>
>>
>>
>> # Deny direct access to WEB-INF and META-INF
>> #
>> <Location "/manager/WEB-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> <Location "/manager/META-INF/*">
>> AllowOverride None
>> deny from all
>> </Location>
>>
>> JkMount /manager/list ajp13
>> JkMount /manager/serverinfo ajp13
>> JkMount /manager/deploy ajp13
>> JkMount /manager/sessions ajp13
>> JkMount /manager/reload ajp13
>> JkMount /manager/html/* ajp13
>> JkMount /manager/resources ajp13
>> JkMount /manager/start ajp13
>> JkMount /manager/stop ajp13
>> JkMount /manager/install ajp13
>> JkMount /manager/*.jsp ajp13
>> JkMount /manager/roles ajp13
>> JkMount /manager/remove ajp13
>> JkMount /manager/undeploy ajp13
>> </VirtualHost>
>>
>>
>> ------------------------------------------------------------------------
>>
>> <!-- Example Server Configuration File -->
>> <!-- Note that component elements are nested corresponding to their
>> parent-child relationships with each other -->
>>
>> <!-- A "Server" is a singleton element that represents the entire JVM,
>> which may contain one or more "Service" instances. The Server
>> listens for a shutdown command on the indicated port.
>>
>> Note: A "Server" is not itself a "Container", so you may not
>> define subcomponents such as "Valves" or "Loggers" at this level.
>> -->
>>
>> <Server name="localhost" port="8005" shutdown="SHUTDOWN" debug="0">
>>
>>
>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>> modJk="/usr/lib/apache/mod_jk.so" />
>>
>>
>> <!-- Comment these entries out to disable JMX MBeans support -->
>> <!-- You may also configure custom components (e.g. Valves/Realms)
>> by including your own mbean-descriptor file(s), and setting the
>> "descriptors" attribute to point to a ';' seperated list of paths
>> (in the ClassLoader sense) of files to add to the default list.
>> e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
>> -->
>> <!-- Listener
>> className="org.apache.catalina.mbeans.ServerLifecycleListener"
>> debug="0"/>
>> <Listener
>> className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
>> debug="0"/ -->
>>
>> <!-- Global JNDI resources -->
>> <GlobalNamingResources>
>>
>> <!-- Test entry for demonstration purposes -->
>> <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
>>
>> <!-- Editable user database that can also be used by
>> UserDatabaseRealm to authenticate users -->
>> <Resource name="UserDatabase" auth="Container"
>> type="org.apache.catalina.UserDatabase"
>> description="User database that can be updated and saved">
>> </Resource>
>> <ResourceParams name="UserDatabase">
>> <parameter>
>> <name>factory</name>
>>
>> <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
>> </parameter>
>> <parameter>
>> <name>pathname</name>
>> <value>conf/tomcat-users.xml</value>
>> </parameter>
>> </ResourceParams>
>>
>> </GlobalNamingResources>
>>
>> <!-- A "Service" is a collection of one or more "Connectors" that share
>> a single "Container" (and therefore the web applications visible
>> within that Container). Normally, that Container is an "Engine",
>> but this is not required.
>>
>> Note: A "Service" is not itself a "Container", so you may not
>> define subcomponents such as "Valves" or "Loggers" at this level.
>> -->
>>
>> <!-- Define the Tomcat Stand-Alone Service -->
>> <Service name="Tomcat-Standalone">
>>
>> <!-- A "Connector" represents an endpoint by which requests are
>> received
>> and responses are returned. Each Connector passes requests
>> on to the
>> associated "Container" (normally an Engine) for processing.
>>
>> By default, a non-SSL HTTP/1.1 Connector is established on
>> port 8080.
>> You can also enable an SSL HTTP/1.1 Connector on port 8443 by
>> following the instructions below and uncommenting the second
>> Connector
>> entry. SSL support requires the following steps (see the SSL
>> Config
>> HOWTO in the Tomcat 4.0 documentation bundle for more detailed
>> instructions):
>> * Download and install JSSE 1.0.2 or later, and put the JAR
>> files
>> into "$JAVA_HOME/jre/lib/ext".
>> * Execute:
>> %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA
>> (Windows)
>> $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA
>> (Unix)
>> with a password value of "changeit" for both the
>> certificate and
>> the keystore itself.
>>
>> By default, DNS lookups are enabled when a web application calls
>> request.getRemoteHost(). This can have an adverse impact on
>> performance, so you can disable it by setting the
>> "enableLookups" attribute to "false". When DNS lookups are
>> disabled,
>> request.getRemoteHost() will return the String version of the
>> IP address of the remote client.
>> -->
>>
>> <!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
>> <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>> port="8080" minProcessors="5" maxProcessors="75"
>> enableLookups="true" redirectPort="8443"
>> acceptCount="100" debug="0" connectionTimeout="20000"
>> useURIValidationHack="false"
>> disableUploadTimeout="true" />
>> <!-- Note : To disable connection timeouts, set connectionTimeout
>> value to -1 -->
>>
>> <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
>> <!--
>> <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>> port="8443" minProcessors="5" maxProcessors="75"
>> enableLookups="true"
>> acceptCount="100" debug="0" scheme="https" secure="true"
>> useURIValidationHack="false" disableUploadTimeout="true">
>> <Factory
>> className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
>> clientAuth="false" protocol="TLS" />
>> </Connector>
>> -->
>>
>> <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
>> <!-- Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>> port="8009" minProcessors="5" maxProcessors="75"
>> enableLookups="true" redirectPort="8443"
>> acceptCount="10" debug="0" connectionTimeout="0"
>> useURIValidationHack="false"
>>
>> protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/-->
>>
>> <!-- Define an AJP 1.3 Connector on port 8009 -->
>> <Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
>> port="8009" minProcessors="5" maxProcessors="75"
>> acceptCount="10" debug="0"/>
>>
>> <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
>> <!-- See proxy documentation for more information about using
>> this. -->
>> <!--
>> <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>> port="8082" minProcessors="5" maxProcessors="75"
>> enableLookups="true"
>> acceptCount="100" debug="0" connectionTimeout="20000"
>> proxyPort="80" useURIValidationHack="false"
>> disableUploadTimeout="true" />
>> -->
>>
>> <!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
>> <!--
>> <Connector
>> className="org.apache.catalina.connector.http.HttpConnector"
>> port="8083" minProcessors="5" maxProcessors="75"
>> enableLookups="true" redirectPort="8443"
>> acceptCount="10" debug="0" />
>> -->
>>
>> <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
>> <!--
>> <Connector
>> className="org.apache.catalina.connector.http10.HttpConnector"
>> port="8084" minProcessors="5" maxProcessors="75"
>> enableLookups="true" redirectPort="8443"
>> acceptCount="10" debug="0" />
>> -->
>>
>> <!-- An Engine represents the entry point (within Catalina) that
>> processes
>> every request. The Engine implementation for Tomcat stand alone
>> analyzes the HTTP headers included with the request, and
>> passes them
>> on to the appropriate Host (virtual host). -->
>>
>> <!-- You should set jvmRoute to support load-balancing via JK/JK2
>> ie :
>> <Engine name="Standalone" defaultHost="localhost" debug="0"
>> jmvRoute="jvm1"> --> <!-- Define the top level
>> container in our container hierarchy -->
>> <Engine name="Standalone" defaultHost="localhost" debug="0">
>>
>> <!-- The request dumper valve dumps useful debugging information
>> about
>> the request headers and cookies that were received, and the
>> response
>> headers and cookies that were sent, for all requests
>> received by
>> this instance of Tomcat. If you care only about requests to a
>> particular virtual host, or a particular application, nest
>> this
>> element inside the corresponding <Host> or <Context> entry
>> instead.
>>
>> For a similar mechanism that is portable to all Servlet 2.3
>> containers, check out the "RequestDumperFilter" Filter in the
>> example application (the source for this filter may be
>> found in
>> "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
>>
>> Request dumping is disabled by default. Uncomment the
>> following
>> element to enable it. -->
>> <!--
>> <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
>> -->
>>
>> <!-- Global logger unless overridden at lower levels -->
>> <Logger className="org.apache.catalina.logger.FileLogger"
>> prefix="catalina_log." suffix=".txt"
>> timestamp="true"/>
>>
>> <!-- Because this Realm is here, an instance will be shared
>> globally -->
>>
>> <!-- This Realm uses the UserDatabase configured in the global JNDI
>> resources under the key "UserDatabase". Any edits
>> that are performed against this UserDatabase are immediately
>> available for use by the Realm. -->
>> <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
>> debug="0" resourceName="UserDatabase"/>
>>
>> <!-- Comment out the old realm but leave here for now in case we
>> need to go back quickly -->
>> <!--
>> <Realm className="org.apache.catalina.realm.MemoryRealm" />
>> -->
>>
>> <!-- Replace the above Realm with one of the following to get a
>> Realm
>> stored in a database and accessed via JDBC -->
>>
>> <!--
>> <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
>> driverName="org.gjt.mm.mysql.Driver"
>> connectionURL="jdbc:mysql://localhost/authority"
>> connectionName="test" connectionPassword="test"
>> userTable="users" userNameCol="user_name"
>> userCredCol="user_pass"
>> userRoleTable="user_roles" roleNameCol="role_name" />
>> -->
>>
>> <!--
>> <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
>> driverName="oracle.jdbc.driver.OracleDriver"
>> connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
>> connectionName="scott" connectionPassword="tiger"
>> userTable="users" userNameCol="user_name"
>> userCredCol="user_pass"
>> userRoleTable="user_roles" roleNameCol="role_name" />
>> -->
>>
>> <!--
>> <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
>> driverName="sun.jdbc.odbc.JdbcOdbcDriver"
>> connectionURL="jdbc:odbc:CATALINA"
>> userTable="users" userNameCol="user_name"
>> userCredCol="user_pass"
>> userRoleTable="user_roles" roleNameCol="role_name" />
>> -->
>>
>> <!-- Define the default virtual host -->
>> <Host name="localhost" debug="0" appBase="webapps"
>> unpackWARs="true" autoDeploy="true">
>>
>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>> append="true" forwardAll="false"
>> modJk="/usr/local/apache2/modules/mod_jk.so" />
>>
>>
>>
>>
>> <!-- Normally, users must authenticate themselves to each web app
>> individually. Uncomment the following entry if you would
>> like
>> a user to be authenticated the first time they encounter a
>> resource protected by a security constraint, and then
>> have that
>> user identity maintained across *all* web applications
>> contained
>> in this virtual host. -->
>> <!--
>> <Valve className="org.apache.catalina.authenticator.SingleSignOn"
>> debug="0"/>
>> -->
>>
>> <!-- Access log processes all requests for this virtual host. By
>> default, log files are created in the "logs" directory
>> relative to
>> $CATALINA_HOME. If you wish, you can specify a different
>> directory with the "directory" attribute. Specify either
>> a relative
>> (to $CATALINA_HOME) or absolute path to the desired
>> directory.
>> -->
>> <!--
>> <Valve className="org.apache.catalina.valves.AccessLogValve"
>> directory="logs" prefix="localhost_access_log."
>> suffix=".txt"
>> pattern="common" resolveHosts="false"/>
>> -->
>>
>> <!-- Logger shared by all Contexts related to this virtual
>> host. By
>> default (when using FileLogger), log files are created in
>> the "logs"
>> directory relative to $CATALINA_HOME. If you wish, you
>> can specify
>> a different directory with the "directory" attribute.
>> Specify either a
>> relative (to $CATALINA_HOME) or absolute path to the desired
>> directory.-->
>> <Logger className="org.apache.catalina.logger.FileLogger"
>> directory="logs" prefix="localhost_log." suffix=".txt"
>> timestamp="true"/>
>>
>> <!-- Define properties for each web application. This is only
>> needed
>> if you want to set non-default properties, or have web
>> application
>> document roots in places other than the virtual host's
>> appBase
>> directory. -->
>>
>> <!-- Tomcat Root Context -->
>> <!--
>> <Context path="" docBase="ROOT" debug="0"/>
>> -->
>>
>> <!-- Tomcat Examples Context -->
>> <Context path="/examples" docBase="examples" debug="0"
>> reloadable="true" crossContext="true">
>> <Logger className="org.apache.catalina.logger.FileLogger"
>> prefix="localhost_examples_log." suffix=".txt"
>> timestamp="true"/>
>> <Ejb name="ejb/EmplRecord" type="Entity"
>> home="com.wombat.empl.EmployeeRecordHome"
>> remote="com.wombat.empl.EmployeeRecord"/>
>>
>> <!-- If you wanted the examples app to be able to edit the
>> user database, you would uncomment the following entry.
>> Of course, you would want to enable security on the
>> application as well, so this is not done by default!
>> The database object could be accessed like this:
>>
>> Context initCtx = new InitialContext();
>> Context envCtx = (Context)
>> initCtx.lookup("java:comp/env");
>> UserDatabase database =
>> (UserDatabase) envCtx.lookup("userDatabase");
>> -->
>> <!--
>> <ResourceLink name="userDatabase" global="UserDatabase"
>> type="org.apache.catalina.UserDatabase"/>
>> -->
>>
>>
>> <!-- PersistentManager: Uncomment the section below to test
>> Persistent Sessions.
>> saveOnRestart: If true, all
>> active sessions will be saved
>> to the Store when Catalina is shutdown, regardless of
>> other settings. All Sessions found in the Store will
>> be loaded on startup. Sessions past their expiration are
>> ignored in both cases.
>> maxActiveSessions: If 0 or greater, having too many
>> active sessions will result in some being swapped
>> out. minIdleSwap
>> limits this. -1 or 0 means unlimited sessions are
>> allowed.
>> If it is not possible to swap sessions new sessions will
>> be rejected.
>> This avoids thrashing when the site is highly active.
>> minIdleSwap: Sessions must be idle for at least this long
>> (in seconds) before they will be swapped out due to
>> activity.
>> 0 means sessions will almost always be swapped out after
>> use - this will be noticeably slow for your users.
>> maxIdleSwap: Sessions will be swapped out if idle for this
>> long (in seconds). If minIdleSwap is higher, then it
>> will
>> override this. This isn't exact: it is checked
>> periodically.
>> -1 means sessions won't be swapped out for this reason,
>> although they may be swapped out for maxActiveSessions.
>> If set to >= 0, guarantees that all sessions found in
>> the
>> Store will be loaded on startup.
>> maxIdleBackup: Sessions will be backed up (saved to the
>> Store,
>> but left in active memory) if idle for this long (in
>> seconds), and all sessions found in the Store will be
>> loaded on startup.
>> If set to -1 sessions will not be backed up, 0 means
>> they
>> should be backed up shortly after being used.
>>
>> To clear sessions from the Store, set
>> maxActiveSessions, maxIdleSwap,
>> and minIdleBackup all to -1, saveOnRestart to false,
>> then restart Catalina.
>> -->
>> <!--
>> <Manager
>> className="org.apache.catalina.session.PersistentManager"
>> debug="0"
>> saveOnRestart="true"
>> maxActiveSessions="-1"
>> minIdleSwap="-1"
>> maxIdleSwap="-1"
>> maxIdleBackup="-1">
>> <Store
>> className="org.apache.catalina.session.FileStore"/>
>> </Manager>
>> -->
>> <Environment name="maxExemptions" type="java.lang.Integer"
>> value="15"/>
>> <Parameter name="context.param.name"
>> value="context.param.value"
>> override="false"/>
>> <Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
>> type="javax.sql.DataSource"/>
>> <ResourceParams name="jdbc/EmployeeAppDb">
>> <parameter><name>username</name><value>sa</value></parameter>
>> <parameter><name>password</name><value></value></parameter>
>> <parameter><name>driverClassName</name>
>> <value>org.hsql.jdbcDriver</value></parameter>
>> <parameter><name>url</name>
>> <value>jdbc:HypersonicSQL:database</value></parameter>
>> </ResourceParams>
>> <Resource name="mail/Session" auth="Container"
>> type="javax.mail.Session"/>
>> <ResourceParams name="mail/Session">
>> <parameter>
>> <name>mail.smtp.host</name>
>> <value>localhost</value>
>> </parameter>
>> </ResourceParams>
>> <ResourceLink name="linkToGlobalResource"
>> global="simpleValue"
>> type="java.lang.Integer"/>
>> </Context>
>>
>> </Host>
>>
>> </Engine>
>>
>> </Service>
>>
>> <!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with
>> Tomcat 4.0
>> as its servlet container. Please read the README.txt file
>> coming with
>> the WebApp Module distribution on how to build it.
>> (Or check out the "jakarta-tomcat-connectors/webapp" CVS
>> repository)
>>
>> To configure the Apache side, you must ensure that you have the
>> "ServerName" and "Port" directives defined in "httpd.conf". Then,
>> lines like these to the bottom of your "httpd.conf" file:
>>
>> LoadModule webapp_module libexec/mod_webapp.so
>> WebAppConnection warpConnection warp localhost:8008
>> WebAppDeploy examples warpConnection /examples/
>>
>> The next time you restart Apache (after restarting Tomcat, if
>> needed)
>> the connection will be established, and all applications you make
>> visible via "WebAppDeploy" directives can be accessed through
>> Apache.
>> -->
>>
>> <!-- Define an Apache-Connector Service -->
>> <!--
>> <Service name="Tomcat-Apache">
>>
>> <Connector
>> className="org.apache.catalina.connector.warp.WarpConnector"
>> port="8008" minProcessors="5" maxProcessors="75"
>> enableLookups="true" appBase="webapps"
>> acceptCount="10" debug="0"/>
>>
>> <Engine className="org.apache.catalina.connector.warp.WarpEngine"
>> name="Apache" debug="0">
>>
>> <Logger className="org.apache.catalina.logger.FileLogger"
>> prefix="apache_log." suffix=".txt"
>> timestamp="true"/>
>>
>> <Realm className="org.apache.catalina.realm.MemoryRealm" />
>>
>> </Engine>
>>
>> </Service>
>> -->
>>
>> </Server>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
>
--
Emerson Cargnin
Analista de Sitemas
Setor de Desenvolvimento de Sistemas - TRE-SC
tel : (048) - 251-3700 - Ramal 3181
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
mod_jk virtual hosts with specific war files
Posted by Gustavo Lima <li...@opendf.com.br>.
Hi All,
I?m integrating apache 2.0.40 and tomcat 4.1.24 with mod_jk using the
listener example by John Turner. It seems to work pretty fine. I cannot run
all the stuff I call via 8080 port but it doesn?t seem to be a problem.
examples page do not open in pure apache. BTW my real big problem is another
issue.
I have 5 clients trying to use the war in my tomcat; If they use
www.mydomain.net/theirthings it works fine. But I won?t them to open their
war in their own domain name. How does server.xml and httpd.conf will look
like with these new confs?
Thank?s for any help.
Gustavo
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Qing Xie <xi...@ecopiabio.com>.
If you change
"JkLogLevel emerg" to "JkLogLevel debug" in mod_jk.conf, when you start tomcat, you should see something like this in mod_jk.log:
[Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into jk_uri_worker_map_t::uri_worker_map_open, exact rule /examples/jsp/security/protected/j_security_check=worker1 was added
[Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into jk_uri_worker_map_t::uri_worker_map_open, exact rule /examples/snoop=worker1 was added
[Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (321)]: Into jk_uri_worker_map_t::uri_worker_map_open, match rule /examples/servlet/=worker1 was added
[Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into jk_uri_worker_map_t::uri_worker_map_open, exact rule /examples/CompressionTest=worker1 was added
[Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (299)]: Into jk_uri_worker_map_t::uri_worker_map_open, suffix rule /examples/.jsp=worker1 was added
[Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into jk_uri_worker_map_t::uri_worker_map_open, exact rule /examples/servletToJsp=worker1 was added
[Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (345)]: Into jk_uri_worker_map_t::uri_worker_map_open, exact rule /examples/SendMailServlet=worker1 was added
[Fri Apr 25 16:21:51 2003] [jk_uri_worker_map.c (408)]: Into jk_uri_worker_map_t::uri_worker_map_open, there are 9 rules
If you don't, then the mapping has problems.
Hope this helps,
Qing
Emerson Cargnin wrote:
> At first thanks for your fast reply : )
>
> - about adding AddModule mod_jk.c (if you're using JK)
> I thing that adding the line "LoadModule jk_module
> /usr/lib/apache/mod_jk.so" makes unecessary to add the line you told,
> and your tutorial doens't say anything about this line, but apache
> just give me the following warn telling that it's already loaded :
>
> [Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already added,
> skipping
>
> - I'm almost there :). following the steps you tell at the tutorial,
> it creates the mod_jk.conf ok, but it looks that mod_jk doesn't find
> the webapps, although it's configured allright :
>
>
> Apache log :
> [Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does not
> exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
>
> mod_jk.log
>
> [Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
> jk_uri_worker_map_t::map_uri_to_worker
> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]: Attempting to
> map URI '/examples/jsp/num/numguess.jsp'
> [Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
> jk_uri_worker_map_t::map_uri_to_worker, done without a match
>
>
> It looks everything you said before is allright...
> any clue?
>
> John Turner wrote:
>
>>
>>> From comments I've received, this HOWTO is not confusing. It uses
>>> Apache
>>
>>
>> 2, but the setup is the same for Apache 1.3. It uses JK. I've never
>> worked with SuSE, but I can't imagine it being much different than
>> Red Hat.
>>
>> http://www.johnturner.com/howto/rh72-howto.html
>>
>> That said, I see some things with your configuration.
>>
>> - you need this in httpd.conf:
>>
>> AddModule mod_jk.c (if you're using JK)
>>
>> - you need a much simpler workers.properties file...dump ALL of that
>> JNI stuff. Workers.properties shouldn't be more than this:
>>
>> # BEGIN workers.properties
>> worker.list=ajp13
>> worker.ajp13.port=8009
>> worker.ajp13.host=localhost (or IP of Tomcat server)
>> worker.ajp13.type=ajp13
>> # END workers.properties
>> - you need an additional Listener element in server.xml for EACH Host
>> container...either you are missing it or you didn't post it. This is
>> all described in my HOWTO.
>>
>> Your auto-generated mod_jk.conf file should look VERY similar to this:
>> http://www.johnturner.com/howto/mod_jk_conf.html
>>
>> If it doesn't, go back and look at your server.xml and make sure your
>> ApacheConfig Listeners are correct.
>>
>> John
>>
>> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin
>> <em...@tre-sc.gov.br> wrote:
>>
>>> It has 4 days since i'm trying to get apache 1.3 to talk to tomcat
>>> 4.1.24 through jk or jk2.
>>> At first some questions that i haven't seem in my long search :
>>>
>>> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
>>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>>> compability with other php apps. I'd like to use the autoconf and
>>> remote deploy feature of tomcat 4.1 (that's why i'm upgrading my
>>> 3.2.3 production server, which works fine for jk)
>>> - Does jk works well for my case ? (apache 1.3.26 and tomcat
>>> 4.1.24). I read about jk2 is better for apache 2.0, is it true?
>>> - If does, i think i have made some mistake, because it's not
>>> working :)
>>>
>>> My conf :
>>>
>>> --------------------------------------------------------------------------
>>>
>>> ------------------------------------
>>> http.conf (lines added):
>>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>>> Include /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>>
>>> --------------------------------------------------------------------------
>>>
>>> ------------------------------------
>>> server.xml
>>>
>>> under "<Server port=..." i put (it's attached for better
>>> undertanding):
>>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>>> jdk14/conf/jk/workers.properties"
>>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>>> --------------------------------------------------------------------------
>>>
>>> ------------------------------------
>>> worker.properties configuration file (it's at /opt/local/jakarta-
>>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>>
>>> workers.java_home=/usr/java/j2sdk1.4.1_01
>>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>>> ps=/
>>>
>>> worker.list=ajp13
>>> worker.ajp13.port=8009
>>> worker.ajp13.host=lagoa.tre-sc.gov.br
>>> worker.ajp13.type=ajp13
>>> worker.ajp13.lbfactor=1
>>>
>>> worker.loadbalancer.type=lb
>>> worker.loadbalancer.balanced_workers=ajp13
>>> worker.inprocess.type=jni
>>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>>> tomcat.jar
>>> worker.inprocess.cmd_line=start
>>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>>> classic$(ps)libjvm.so
>>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>> inprocess.stdout
>>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>>> inprocess.stderr
>>>
>>> --------------------------------------------------------------------------
>>>
>>> ------------------------------------
>>>
>>> here goes what happens :
>>>
>>> start tomcat, all ok.
>>>
>>> start apache, it says ok but in the log appears :
>>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory:
>>> Error while opening the workers, jk will not work
>>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory:
>>> Error while opening the workers, jk will not work
>>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>>> configured -- resuming normal operations
>>>
>>> is it necessary to do some other specific configuration?
>>> I tried jk2 before this, but it didn't work too :(
>>> I saw a lot of tutorials about jk and jk2, but all of them are
>>> either confuse or don't use autoconf
>>>
>>> Any clue would help
>>>
>>> Thanks in advance
>>>
>>
>>
>>
>
>------------------------------------------------------------------------
>
>########## Auto generated on Thu Aug 16 00:00:09 ART 2001##########
>
><IfModule !mod_jk.c>
> LoadModule jk_module /usr/lib/apache/mod_jk.so
></IfModule>
>
>JkWorkersFile "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties"
>JkLogFile "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"
>
>JkLogLevel emerg
>
>
>
><VirtualHost localhost>
> ServerName localhost
>
> #################### localhost:/admin ####################
>
> # Static files
> Alias /admin "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin"
>
> <Directory "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/admin">
> Options Indexes FollowSymLinks
> DirectoryIndex index.html index.htm index.jsp
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/admin/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/admin/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /admin/j_security_check ajp13
> JkMount /admin/*.do ajp13
> JkMount /admin/*.jsp ajp13
>
> #################### localhost:/webdav ####################
>
> # Static files
> Alias /webdav "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav"
>
> <Directory "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/webdav">
> Options Indexes FollowSymLinks
> DirectoryIndex index.jsp index.html index.htm
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/webdav/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/webdav/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /webdav/*.jsp ajp13
>
> #################### localhost:/examples ####################
>
> # Static files
> Alias /examples "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples"
>
> <Directory "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/examples">
> Options Indexes FollowSymLinks
> DirectoryIndex index.html index.htm index.jsp
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/examples/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/examples/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /examples/jsp/security/protected/j_security_check ajp13
> JkMount /examples/snoop ajp13
> JkMount /examples/servlet/* ajp13
> JkMount /examples/CompressionTest ajp13
> JkMount /examples/*.jsp ajp13
> JkMount /examples/servletToJsp ajp13
> JkMount /examples/SendMailServlet ajp13
>
> #################### localhost:/tomcat-docs ####################
>
> # Static files
> Alias /tomcat-docs "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs"
>
> <Directory "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/tomcat-docs">
> Options Indexes FollowSymLinks
> DirectoryIndex index.html index.htm index.jsp
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/tomcat-docs/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/tomcat-docs/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /tomcat-docs/*.jsp ajp13
>
> #################### localhost:/manager ####################
>
> # Static files
> Alias /manager "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager"
>
> <Directory "/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/webapps/../server/webapps/manager">
> Options Indexes FollowSymLinks
> DirectoryIndex index.html index.htm index.jsp
> </Directory>
>
>
> # Deny direct access to WEB-INF and META-INF
> #
> <Location "/manager/WEB-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> <Location "/manager/META-INF/*">
> AllowOverride None
> deny from all
> </Location>
>
> JkMount /manager/list ajp13
> JkMount /manager/serverinfo ajp13
> JkMount /manager/deploy ajp13
> JkMount /manager/sessions ajp13
> JkMount /manager/reload ajp13
> JkMount /manager/html/* ajp13
> JkMount /manager/resources ajp13
> JkMount /manager/start ajp13
> JkMount /manager/stop ajp13
> JkMount /manager/install ajp13
> JkMount /manager/*.jsp ajp13
> JkMount /manager/roles ajp13
> JkMount /manager/remove ajp13
> JkMount /manager/undeploy ajp13
></VirtualHost>
>
>
>------------------------------------------------------------------------
>
><!-- Example Server Configuration File -->
><!-- Note that component elements are nested corresponding to their
> parent-child relationships with each other -->
>
><!-- A "Server" is a singleton element that represents the entire JVM,
> which may contain one or more "Service" instances. The Server
> listens for a shutdown command on the indicated port.
>
> Note: A "Server" is not itself a "Container", so you may not
> define subcomponents such as "Valves" or "Loggers" at this level.
> -->
>
><Server name="localhost" port="8005" shutdown="SHUTDOWN" debug="0">
>
>
><Listener className="org.apache.ajp.tomcat4.config.ApacheConfig" modJk="/usr/lib/apache/mod_jk.so" />
>
>
> <!-- Comment these entries out to disable JMX MBeans support -->
> <!-- You may also configure custom components (e.g. Valves/Realms) by
> including your own mbean-descriptor file(s), and setting the
> "descriptors" attribute to point to a ';' seperated list of paths
> (in the ClassLoader sense) of files to add to the default list.
> e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
> -->
> <!-- Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
> debug="0"/>
> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
> debug="0"/ -->
>
> <!-- Global JNDI resources -->
> <GlobalNamingResources>
>
> <!-- Test entry for demonstration purposes -->
> <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
>
> <!-- Editable user database that can also be used by
> UserDatabaseRealm to authenticate users -->
> <Resource name="UserDatabase" auth="Container"
> type="org.apache.catalina.UserDatabase"
> description="User database that can be updated and saved">
> </Resource>
> <ResourceParams name="UserDatabase">
> <parameter>
> <name>factory</name>
> <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
> </parameter>
> <parameter>
> <name>pathname</name>
> <value>conf/tomcat-users.xml</value>
> </parameter>
> </ResourceParams>
>
> </GlobalNamingResources>
>
> <!-- A "Service" is a collection of one or more "Connectors" that share
> a single "Container" (and therefore the web applications visible
> within that Container). Normally, that Container is an "Engine",
> but this is not required.
>
> Note: A "Service" is not itself a "Container", so you may not
> define subcomponents such as "Valves" or "Loggers" at this level.
> -->
>
> <!-- Define the Tomcat Stand-Alone Service -->
> <Service name="Tomcat-Standalone">
>
> <!-- A "Connector" represents an endpoint by which requests are received
> and responses are returned. Each Connector passes requests on to the
> associated "Container" (normally an Engine) for processing.
>
> By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
> You can also enable an SSL HTTP/1.1 Connector on port 8443 by
> following the instructions below and uncommenting the second Connector
> entry. SSL support requires the following steps (see the SSL Config
> HOWTO in the Tomcat 4.0 documentation bundle for more detailed
> instructions):
> * Download and install JSSE 1.0.2 or later, and put the JAR files
> into "$JAVA_HOME/jre/lib/ext".
> * Execute:
> %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
> $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
> with a password value of "changeit" for both the certificate and
> the keystore itself.
>
> By default, DNS lookups are enabled when a web application calls
> request.getRemoteHost(). This can have an adverse impact on
> performance, so you can disable it by setting the
> "enableLookups" attribute to "false". When DNS lookups are disabled,
> request.getRemoteHost() will return the String version of the
> IP address of the remote client.
> -->
>
> <!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
> <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
> port="8080" minProcessors="5" maxProcessors="75"
> enableLookups="true" redirectPort="8443"
> acceptCount="100" debug="0" connectionTimeout="20000"
> useURIValidationHack="false" disableUploadTimeout="true" />
> <!-- Note : To disable connection timeouts, set connectionTimeout value
> to -1 -->
>
> <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
> <!--
> <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
> port="8443" minProcessors="5" maxProcessors="75"
> enableLookups="true"
> acceptCount="100" debug="0" scheme="https" secure="true"
> useURIValidationHack="false" disableUploadTimeout="true">
> <Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
> clientAuth="false" protocol="TLS" />
> </Connector>
> -->
>
> <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
> <!-- Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
> port="8009" minProcessors="5" maxProcessors="75"
> enableLookups="true" redirectPort="8443"
> acceptCount="10" debug="0" connectionTimeout="0"
> useURIValidationHack="false"
> protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/-->
>
> <!-- Define an AJP 1.3 Connector on port 8009 -->
>
> <Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
> port="8009" minProcessors="5" maxProcessors="75"
> acceptCount="10" debug="0"/>
>
>
> <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
> <!-- See proxy documentation for more information about using this. -->
> <!--
> <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
> port="8082" minProcessors="5" maxProcessors="75"
> enableLookups="true"
> acceptCount="100" debug="0" connectionTimeout="20000"
> proxyPort="80" useURIValidationHack="false"
> disableUploadTimeout="true" />
> -->
>
> <!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
> <!--
> <Connector className="org.apache.catalina.connector.http.HttpConnector"
> port="8083" minProcessors="5" maxProcessors="75"
> enableLookups="true" redirectPort="8443"
> acceptCount="10" debug="0" />
> -->
>
> <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
> <!--
> <Connector className="org.apache.catalina.connector.http10.HttpConnector"
> port="8084" minProcessors="5" maxProcessors="75"
> enableLookups="true" redirectPort="8443"
> acceptCount="10" debug="0" />
> -->
>
> <!-- An Engine represents the entry point (within Catalina) that processes
> every request. The Engine implementation for Tomcat stand alone
> analyzes the HTTP headers included with the request, and passes them
> on to the appropriate Host (virtual host). -->
>
> <!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
> <Engine name="Standalone" defaultHost="localhost" debug="0" jmvRoute="jvm1">
> -->
>
> <!-- Define the top level container in our container hierarchy -->
> <Engine name="Standalone" defaultHost="localhost" debug="0">
>
> <!-- The request dumper valve dumps useful debugging information about
> the request headers and cookies that were received, and the response
> headers and cookies that were sent, for all requests received by
> this instance of Tomcat. If you care only about requests to a
> particular virtual host, or a particular application, nest this
> element inside the corresponding <Host> or <Context> entry instead.
>
> For a similar mechanism that is portable to all Servlet 2.3
> containers, check out the "RequestDumperFilter" Filter in the
> example application (the source for this filter may be found in
> "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
>
> Request dumping is disabled by default. Uncomment the following
> element to enable it. -->
> <!--
> <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
> -->
>
> <!-- Global logger unless overridden at lower levels -->
> <Logger className="org.apache.catalina.logger.FileLogger"
> prefix="catalina_log." suffix=".txt"
> timestamp="true"/>
>
> <!-- Because this Realm is here, an instance will be shared globally -->
>
> <!-- This Realm uses the UserDatabase configured in the global JNDI
> resources under the key "UserDatabase". Any edits
> that are performed against this UserDatabase are immediately
> available for use by the Realm. -->
> <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
> debug="0" resourceName="UserDatabase"/>
>
> <!-- Comment out the old realm but leave here for now in case we
> need to go back quickly -->
> <!--
> <Realm className="org.apache.catalina.realm.MemoryRealm" />
> -->
>
> <!-- Replace the above Realm with one of the following to get a Realm
> stored in a database and accessed via JDBC -->
>
> <!--
> <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
> driverName="org.gjt.mm.mysql.Driver"
> connectionURL="jdbc:mysql://localhost/authority"
> connectionName="test" connectionPassword="test"
> userTable="users" userNameCol="user_name" userCredCol="user_pass"
> userRoleTable="user_roles" roleNameCol="role_name" />
> -->
>
> <!--
> <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
> driverName="oracle.jdbc.driver.OracleDriver"
> connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
> connectionName="scott" connectionPassword="tiger"
> userTable="users" userNameCol="user_name" userCredCol="user_pass"
> userRoleTable="user_roles" roleNameCol="role_name" />
> -->
>
> <!--
> <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
> driverName="sun.jdbc.odbc.JdbcOdbcDriver"
> connectionURL="jdbc:odbc:CATALINA"
> userTable="users" userNameCol="user_name" userCredCol="user_pass"
> userRoleTable="user_roles" roleNameCol="role_name" />
> -->
>
> <!-- Define the default virtual host -->
> <Host name="localhost" debug="0" appBase="webapps"
> unpackWARs="true" autoDeploy="true">
>
>
> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig" append="true" forwardAll="false"
> modJk="/usr/local/apache2/modules/mod_jk.so" />
>
>
>
>
> <!-- Normally, users must authenticate themselves to each web app
> individually. Uncomment the following entry if you would like
> a user to be authenticated the first time they encounter a
> resource protected by a security constraint, and then have that
> user identity maintained across *all* web applications contained
> in this virtual host. -->
> <!--
> <Valve className="org.apache.catalina.authenticator.SingleSignOn"
> debug="0"/>
> -->
>
> <!-- Access log processes all requests for this virtual host. By
> default, log files are created in the "logs" directory relative to
> $CATALINA_HOME. If you wish, you can specify a different
> directory with the "directory" attribute. Specify either a relative
> (to $CATALINA_HOME) or absolute path to the desired directory.
> -->
> <!--
> <Valve className="org.apache.catalina.valves.AccessLogValve"
> directory="logs" prefix="localhost_access_log." suffix=".txt"
> pattern="common" resolveHosts="false"/>
> -->
>
> <!-- Logger shared by all Contexts related to this virtual host. By
> default (when using FileLogger), log files are created in the "logs"
> directory relative to $CATALINA_HOME. If you wish, you can specify
> a different directory with the "directory" attribute. Specify either a
> relative (to $CATALINA_HOME) or absolute path to the desired
> directory.-->
> <Logger className="org.apache.catalina.logger.FileLogger"
> directory="logs" prefix="localhost_log." suffix=".txt"
> timestamp="true"/>
>
> <!-- Define properties for each web application. This is only needed
> if you want to set non-default properties, or have web application
> document roots in places other than the virtual host's appBase
> directory. -->
>
> <!-- Tomcat Root Context -->
> <!--
> <Context path="" docBase="ROOT" debug="0"/>
> -->
>
> <!-- Tomcat Examples Context -->
> <Context path="/examples" docBase="examples" debug="0"
> reloadable="true" crossContext="true">
> <Logger className="org.apache.catalina.logger.FileLogger"
> prefix="localhost_examples_log." suffix=".txt"
> timestamp="true"/>
> <Ejb name="ejb/EmplRecord" type="Entity"
> home="com.wombat.empl.EmployeeRecordHome"
> remote="com.wombat.empl.EmployeeRecord"/>
>
> <!-- If you wanted the examples app to be able to edit the
> user database, you would uncomment the following entry.
> Of course, you would want to enable security on the
> application as well, so this is not done by default!
> The database object could be accessed like this:
>
> Context initCtx = new InitialContext();
> Context envCtx = (Context) initCtx.lookup("java:comp/env");
> UserDatabase database =
> (UserDatabase) envCtx.lookup("userDatabase");
> -->
><!--
> <ResourceLink name="userDatabase" global="UserDatabase"
> type="org.apache.catalina.UserDatabase"/>
>-->
>
>
> <!-- PersistentManager: Uncomment the section below to test Persistent
> Sessions.
>
> saveOnRestart: If true, all active sessions will be saved
> to the Store when Catalina is shutdown, regardless of
> other settings. All Sessions found in the Store will be
> loaded on startup. Sessions past their expiration are
> ignored in both cases.
> maxActiveSessions: If 0 or greater, having too many active
> sessions will result in some being swapped out. minIdleSwap
> limits this. -1 or 0 means unlimited sessions are allowed.
> If it is not possible to swap sessions new sessions will
> be rejected.
> This avoids thrashing when the site is highly active.
> minIdleSwap: Sessions must be idle for at least this long
> (in seconds) before they will be swapped out due to
> activity.
> 0 means sessions will almost always be swapped out after
> use - this will be noticeably slow for your users.
> maxIdleSwap: Sessions will be swapped out if idle for this
> long (in seconds). If minIdleSwap is higher, then it will
> override this. This isn't exact: it is checked periodically.
> -1 means sessions won't be swapped out for this reason,
> although they may be swapped out for maxActiveSessions.
> If set to >= 0, guarantees that all sessions found in the
> Store will be loaded on startup.
> maxIdleBackup: Sessions will be backed up (saved to the Store,
> but left in active memory) if idle for this long (in seconds),
> and all sessions found in the Store will be loaded on startup.
> If set to -1 sessions will not be backed up, 0 means they
> should be backed up shortly after being used.
>
> To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
> and minIdleBackup all to -1, saveOnRestart to false, then restart
> Catalina.
> -->
> <!--
> <Manager className="org.apache.catalina.session.PersistentManager"
> debug="0"
> saveOnRestart="true"
> maxActiveSessions="-1"
> minIdleSwap="-1"
> maxIdleSwap="-1"
> maxIdleBackup="-1">
> <Store className="org.apache.catalina.session.FileStore"/>
> </Manager>
> -->
> <Environment name="maxExemptions" type="java.lang.Integer"
> value="15"/>
> <Parameter name="context.param.name" value="context.param.value"
> override="false"/>
> <Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
> type="javax.sql.DataSource"/>
> <ResourceParams name="jdbc/EmployeeAppDb">
> <parameter><name>username</name><value>sa</value></parameter>
> <parameter><name>password</name><value></value></parameter>
> <parameter><name>driverClassName</name>
> <value>org.hsql.jdbcDriver</value></parameter>
> <parameter><name>url</name>
> <value>jdbc:HypersonicSQL:database</value></parameter>
> </ResourceParams>
> <Resource name="mail/Session" auth="Container"
> type="javax.mail.Session"/>
> <ResourceParams name="mail/Session">
> <parameter>
> <name>mail.smtp.host</name>
> <value>localhost</value>
> </parameter>
> </ResourceParams>
> <ResourceLink name="linkToGlobalResource"
> global="simpleValue"
> type="java.lang.Integer"/>
> </Context>
>
> </Host>
>
> </Engine>
>
> </Service>
>
> <!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with Tomcat 4.0
> as its servlet container. Please read the README.txt file coming with
> the WebApp Module distribution on how to build it.
> (Or check out the "jakarta-tomcat-connectors/webapp" CVS repository)
>
> To configure the Apache side, you must ensure that you have the
> "ServerName" and "Port" directives defined in "httpd.conf". Then,
> lines like these to the bottom of your "httpd.conf" file:
>
> LoadModule webapp_module libexec/mod_webapp.so
> WebAppConnection warpConnection warp localhost:8008
> WebAppDeploy examples warpConnection /examples/
>
> The next time you restart Apache (after restarting Tomcat, if needed)
> the connection will be established, and all applications you make
> visible via "WebAppDeploy" directives can be accessed through Apache.
> -->
>
> <!-- Define an Apache-Connector Service -->
><!--
> <Service name="Tomcat-Apache">
>
> <Connector className="org.apache.catalina.connector.warp.WarpConnector"
> port="8008" minProcessors="5" maxProcessors="75"
> enableLookups="true" appBase="webapps"
> acceptCount="10" debug="0"/>
>
> <Engine className="org.apache.catalina.connector.warp.WarpEngine"
> name="Apache" debug="0">
>
> <Logger className="org.apache.catalina.logger.FileLogger"
> prefix="apache_log." suffix=".txt"
> timestamp="true"/>
>
> <Realm className="org.apache.catalina.realm.MemoryRealm" />
>
> </Engine>
>
> </Service>
>-->
>
></Server>
>
>
>
>------------------------------------------------------------------------
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: Apache redirection
Posted by ca...@stj.gov.br.
HI!
Have you tried the ProxyPass & ProxyPassReverse directives? They work
great for us here. You get your Apache to act as a Reverse Proxy for your
other server, and there is no problems with parameters..... (the browser is
not redirected to the other server.... the pages come from your main
server)
Regards.....
Carlos Zottmann.
khachchou simo
<m_khachchou@yaho
o.fr> Para
Tomcat Users List
10/05/2003 12:21 <to...@jakarta.apache.org>
cc
Favor responder a Assunto
"Tomcat Users Apache redirection
List"
<tomcat-user@jaka
rta.apache.org>
Hi everybody,
My problem doesn't really concern Tomcat. It is about apache redirection. I
am working on an application which uses Apache/Tomcat and I want to
redirect every request to cgi file (*.cgi?... followed by parameters) to
another location, thus the request won't be treates in the current server
but in another server. So I have added in the httpd.conf file this :
"RedirectMatch (.*)\.cgi http://www.mysite.com/location/"
but unfortunately when I want send a request with parameters (eg :
myfile.cgi?action=logout) I am getting
"http://www.mysite.com/location/?action=logout"
so the name of the cgi file has disapeared.
Any ideas
best regards
Mohammed
---------------------------------
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
Testez le nouveau Yahoo! Mail
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Apache redirection
Posted by khachchou simo <m_...@yahoo.fr>.
Hi everybody,
My problem doesn't really concern Tomcat. It is about apache redirection. I am working on an application which uses Apache/Tomcat and I want to redirect every request to cgi file (*.cgi?... followed by parameters) to another location, thus the request won't be treates in the current server but in another server. So I have added in the httpd.conf file this :
"RedirectMatch (.*)\.cgi http://www.mysite.com/location/"
but unfortunately when I want send a request with parameters (eg : myfile.cgi?action=logout) I am getting
"http://www.mysite.com/location/?action=logout"
so the name of the cgi file has disapeared.
Any ideas
best regards
Mohammed
---------------------------------
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
Testez le nouveau Yahoo! Mail
Re: connection apache 1.3 to tomcat 4.1.24
Posted by Emerson Cargnin <em...@tre-sc.gov.br>.
At first thanks for your fast reply : )
- about adding AddModule mod_jk.c (if you're using JK)
I thing that adding the line "LoadModule jk_module
/usr/lib/apache/mod_jk.so" makes unecessary to add the line you told,
and your tutorial doens't say anything about this line, but apache just
give me the following warn telling that it's already loaded :
[Wed Aug 15 23:20:05 2001] [warn] module mod_jk.c is already added, skipping
- I'm almost there :). following the steps you tell at the tutorial, it
creates the mod_jk.conf ok, but it looks that mod_jk doesn't find the
webapps, although it's configured allright :
Apache log :
[Wed Aug 15 23:20:30 2001] [error] [client 10.9.7.58] File does not
exist: /srv/www/htdocs/examples/jsp/num/numguess.jsp
mod_jk.log
[Wed Aug 15 23:20:05 2001] [jk_worker.c (111)]: wc_open, done 1
[Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (460)]: Into
jk_uri_worker_map_t::map_uri_to_worker
[Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (477)]: Attempting to
map URI '/examples/jsp/num/numguess.jsp'
[Wed Aug 15 23:20:30 2001] [jk_uri_worker_map.c (599)]:
jk_uri_worker_map_t::map_uri_to_worker, done without a match
It looks everything you said before is allright...
any clue?
John Turner wrote:
>
>> From comments I've received, this HOWTO is not confusing. It uses
>> Apache
>
> 2, but the setup is the same for Apache 1.3. It uses JK. I've never
> worked with SuSE, but I can't imagine it being much different than Red
> Hat.
>
> http://www.johnturner.com/howto/rh72-howto.html
>
> That said, I see some things with your configuration.
>
> - you need this in httpd.conf:
>
> AddModule mod_jk.c (if you're using JK)
>
> - you need a much simpler workers.properties file...dump ALL of that
> JNI stuff. Workers.properties shouldn't be more than this:
>
> # BEGIN workers.properties
> worker.list=ajp13
> worker.ajp13.port=8009
> worker.ajp13.host=localhost (or IP of Tomcat server)
> worker.ajp13.type=ajp13
> # END workers.properties
> - you need an additional Listener element in server.xml for EACH Host
> container...either you are missing it or you didn't post it. This is
> all described in my HOWTO.
>
> Your auto-generated mod_jk.conf file should look VERY similar to this:
> http://www.johnturner.com/howto/mod_jk_conf.html
>
> If it doesn't, go back and look at your server.xml and make sure your
> ApacheConfig Listeners are correct.
>
> John
>
> On Sat, 10 May 2003 11:15:35 -0700, Emerson Cargnin
> <em...@tre-sc.gov.br> wrote:
>
>> It has 4 days since i'm trying to get apache 1.3 to talk to tomcat
>> 4.1.24 through jk or jk2.
>> At first some questions that i haven't seem in my long search :
>>
>> - What's is the best and simpler connector? jk, jk2 or mod_webapp ?
>> In my case, I have to use apache 1.3.26 (in Suse linux) for
>> compability with other php apps. I'd like to use the autoconf and
>> remote deploy feature of tomcat 4.1 (that's why i'm upgrading my
>> 3.2.3 production server, which works fine for jk)
>> - Does jk works well for my case ? (apache 1.3.26 and tomcat 4.1.24).
>> I read about jk2 is better for apache 2.0, is it true?
>> - If does, i think i have made some mistake, because it's not working :)
>>
>> My conf :
>>
>> --------------------------------------------------------------------------
>>
>>
>> ------------------------------------
>> http.conf (lines added):
>> LoadModule jk_module /usr/lib/apache/mod_jk.so
>> Include /opt/local/jakarta-tomcat-4.1.24-LE-jdk14/conf/auto/mod_jk.conf
>>
>> --------------------------------------------------------------------------
>>
>>
>> ------------------------------------
>> server.xml
>>
>> under "<Server port=..." i put (it's attached for better undertanding):
>> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
>> modJk="/usr/lib/apache/mod_jk.so" jkDebug="debug"
>> workersConfig="/opt/local/jakarta-tomcat-4.1.24-LE-
>> jdk14/conf/jk/workers.properties"
>> jkLog="/opt/local/jakarta-tomcat-4.1.24-LE-jdk14/logs/mod_jk.log"/>
>> --------------------------------------------------------------------------
>>
>>
>> ------------------------------------
>> worker.properties configuration file (it's at /opt/local/jakarta-
>> tomcat-4.1.24-LE-jdk14/conf/jk/workers.properties) :
>>
>> workers.java_home=/usr/java/j2sdk1.4.1_01
>> workers.CATALINA_HOME=/opt/local/jakarta-tomcat-4.1.24-LE-jdk14
>> ps=/
>>
>> worker.list=ajp13
>> worker.ajp13.port=8009
>> worker.ajp13.host=lagoa.tre-sc.gov.br
>> worker.ajp13.type=ajp13
>> worker.ajp13.lbfactor=1
>>
>> worker.loadbalancer.type=lb
>> worker.loadbalancer.balanced_workers=ajp13
>> worker.inprocess.type=jni
>> worker.inprocess.class_path=$(workers.CATALINA_HOME)$(ps)lib$(ps)
>> tomcat.jar
>> worker.inprocess.cmd_line=start
>> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)
>> classic$(ps)libjvm.so
>> worker.inprocess.stdout=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>> inprocess.stdout
>> worker.inprocess.stderr=$(workers.CATALINA_HOME)$(ps)logs$(ps)
>> inprocess.stderr
>>
>> --------------------------------------------------------------------------
>>
>>
>> ------------------------------------
>>
>> here goes what happens :
>>
>> start tomcat, all ok.
>>
>> start apache, it says ok but in the log appears :
>> [Wed Aug 15 21:26:01 2001] [error] (2)No such file or directory:
>> Error while opening the workers, jk will not work
>> [Wed Aug 15 21:26:02 2001] [error] (2)No such file or directory:
>> Error while opening the workers, jk will not work
>> [Wed Aug 15 21:26:03 2001] [notice] Apache/1.3.26 (Linux/SuSE)
>> configured -- resuming normal operations
>>
>> is it necessary to do some other specific configuration?
>> I tried jk2 before this, but it didn't work too :(
>> I saw a lot of tutorials about jk and jk2, but all of them are either
>> confuse or don't use autoconf
>>
>> Any clue would help
>>
>> Thanks in advance
>>
>
>
>
--
Emerson Cargnin
Analista de Sitemas
Setor de Desenvolvimento de Sistemas - TRE-SC
tel : (048) - 251-3700 - Ramal 3181