You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@nuttx.apache.org by pk...@apache.org on 2022/10/03 17:35:37 UTC
[incubator-nuttx] branch master updated: arch/risc-v/src/mpfs/mpfs_ethernet.c: Set PHY speed advert after PHY reset
This is an automated email from the ASF dual-hosted git repository.
pkarashchenko pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/incubator-nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new 03bce705d5 arch/risc-v/src/mpfs/mpfs_ethernet.c: Set PHY speed advert after PHY reset
03bce705d5 is described below
commit 03bce705d53607299062818ed3075c16dac77817
Author: Jukka Laitinen <ju...@ssrc.tii.ae>
AuthorDate: Mon Oct 3 14:57:37 2022 +0400
arch/risc-v/src/mpfs/mpfs_ethernet.c: Set PHY speed advert after PHY reset
This allows properly using 10/100Mbps also with 1G phy. Some gigabit PHYs
come out of reset with 1G advertisement enabled, causing other devices to
set up link with 1G. If, after this, the link is set to 10/100 on the mpfs,
the link won't work.
Signed-off-by: Jukka Laitinen <ju...@ssrc.tii.ae>
---
arch/risc-v/src/mpfs/mpfs_ethernet.c | 52 ++++++++++++++++++++----------------
1 file changed, 29 insertions(+), 23 deletions(-)
diff --git a/arch/risc-v/src/mpfs/mpfs_ethernet.c b/arch/risc-v/src/mpfs/mpfs_ethernet.c
index 602c0ef65b..d36e9adb2e 100644
--- a/arch/risc-v/src/mpfs/mpfs_ethernet.c
+++ b/arch/risc-v/src/mpfs/mpfs_ethernet.c
@@ -2355,29 +2355,6 @@ static int mpfs_autonegotiate(struct mpfs_ethmac_s *priv)
goto errout;
}
-#ifndef CONFIG_MPFS_MAC_AUTONEG_DISABLE_1000MBPS
- /* Modify the 1000Base-T control register to advertise 1000Base-T full
- * and half duplex support.
- */
-
- ret = mpfs_phyread(priv, priv->phyaddr, GMII_1000BTCR, &btcr);
- if (ret < 0)
- {
- nerr("ERROR: Failed to read 1000BTCR register: %d\n", ret);
- goto errout;
- }
-
- btcr |= GMII_1000BTCR_1000BASETFULL | GMII_1000BTCR_1000BASETHALF;
-
- ret = mpfs_phywrite(priv, priv->phyaddr, GMII_1000BTCR, btcr);
- if (ret < 0)
- {
- nerr("ERROR: Failed to write 1000BTCR register: %d\n", ret);
- goto errout;
- }
-
-#endif
-
/* Restart Auto_negotiation */
ret = mpfs_phyread(priv, priv->phyaddr, GMII_MCR, &phyval);
@@ -2453,6 +2430,13 @@ static int mpfs_autonegotiate(struct mpfs_ethmac_s *priv)
goto errout;
}
+ ret = mpfs_phyread(priv, priv->phyaddr, GMII_1000BTCR, &btcr);
+ if (ret < 0)
+ {
+ nerr("ERROR: Failed to read 1000BTCR register: %d\n", ret);
+ goto errout;
+ }
+
/* Setup the GMAC link speed */
if ((btsr & GMII_1000BTSR_LP1000BASETFULL) != 0 &&
@@ -3410,6 +3394,7 @@ static int mpfs_phyreset(struct mpfs_ethmac_s *priv)
uint16_t mcr;
int timeout;
int ret;
+ uint16_t btcr;
ninfo(" mpfs_phyreset\n");
@@ -3446,6 +3431,27 @@ static int mpfs_phyreset(struct mpfs_ethmac_s *priv)
}
}
+ /* For gigabit PHYs, set or disable the autonegotiation advertisement for
+ * 1G speed
+ */
+
+ if (mpfs_phyread(priv, priv->phyaddr, GMII_1000BTCR, &btcr) == OK)
+ {
+#if defined(CONFIG_MPFS_MAC_AUTONEG_DISABLE_1000MBPS) || \
+ (!defined(CONFIG_MPFS_MAC_AUTONEG) && \
+ !defined(CONFIG_MPFS_MAC_ETH1000MBPS))
+ btcr &= ~(GMII_1000BTCR_1000BASETFULL | GMII_1000BTCR_1000BASETHALF);
+#else
+ btcr |= GMII_1000BTCR_1000BASETFULL | GMII_1000BTCR_1000BASETHALF;
+#endif
+
+ ret = mpfs_phywrite(priv, priv->phyaddr, GMII_1000BTCR, btcr);
+ if (ret < 0)
+ {
+ nerr("ERROR: Failed to write 1000BTCR register: %d\n", ret);
+ }
+ }
+
/* Disable management port */
mpfs_disablemdio(priv);