You are viewing a plain text version of this content. The canonical link for it is here.
Posted to builds@apache.org by "Mattmann, Chris A (3980)" <ch...@jpl.nasa.gov> on 2016/04/01 06:10:34 UTC
Re: Build failed in Jenkins: joshua_master #4
Send mail to builds@apache.org, I’ve CC’ed them on this message.
builds@, please help :)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Chris Mattmann, Ph.D.
Chief Architect
Instrument Software and Science Data Systems Section (398)
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Office: 168-519, Mailstop: 168-527
Email: chris.a.mattmann@nasa.gov
WWW: http://sunset.usc.edu/~mattmann/
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Director, Information Retrieval and Data Science Group (IRDS)
Adjunct Associate Professor, Computer Science Department
University of Southern California, Los Angeles, CA 90089 USA
WWW: http://irds.usc.edu/
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-----Original Message-----
From: Matt Post <po...@cs.jhu.edu>
Reply-To: "dev@joshua.incubator.apache.org"
<de...@joshua.incubator.apache.org>
Date: Thursday, March 31, 2016 at 4:59 PM
To: "dev@joshua.incubator.apache.org" <de...@joshua.incubator.apache.org>
Cc: "post@jgeppert.com" <po...@jgeppert.com>
Subject: Re: Build failed in Jenkins: joshua_master #4
>(To be clear, I'm asking if anyone knows how we can get a newer version
>of cmake installed on build.apache.org...)
>
>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>
>> It looks like the first failure is at KenLM. I see:
>>
>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>> [exec] CMake 2.8.8 or higher is required. You are running
>>version 2.8.7
>>
>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>
Re: Build failed in Jenkins: joshua_master #4
Posted by Matt Post <po...@cs.jhu.edu>.
Lewis, have you already done this? Should I push something to trigger a rebuild?
> On Apr 1, 2016, at 12:48 PM, Lewis John Mcgibbney <le...@gmail.com> wrote:
>
> OK Andrew thank you Sir. For the time being we will restrict the
> joshua_master [0] to build on ubuntu slaves.
>
> https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/
>
> i suppose we will see the results Sir.
>
> On Fri, Apr 1, 2016 at 9:20 AM, Andrew Bayer <an...@gmail.com> wrote:
>
>> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
>> probably not. As always, if you need system libraries installed, we
>> strongly advise you run your build in a docker container, where you can
>> control things like that.
>>
>> A.
>>
>> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
>> lewis.mcgibbney@gmail.com> wrote:
>>
>>> Hi builds@,
>>> The named library is Boost http://www.boost.org/
>>> Is this library installed on any build slave?
>>>
>>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>>
>>>> Thanks very much! Some of our tests are now passing (17/39), but now I
>>> see
>>>> that it is unable to locate boost:
>>>>
>>>> [exec] Unable to find the requested Boost libraries.
>>>> [exec]
>>>> [exec] Boost version: 1.54.0
>>>> [exec]
>>>> [exec] Boost include path: /usr/include
>>>> [exec]
>>>> [exec] Could not find the following Boost libraries:
>>>> [exec]
>>>> [exec] boost_system
>>>> [exec] boost_thread
>>>> [exec]
>>>> [exec] Some (but not all) of the required Boost libraries were
>>>> found. You may
>>>> [exec] need to install these additional Boost libraries.
>>>> Alternatively, set
>>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
>>> libraries
>>>> or BOOST_ROOT
>>>> [exec] to the location of Boost.
>>>>
>>>> Can you suggest what we can do to address this?
>>>>
>>>>
>>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
>> wrote:
>>>>>
>>>>> The node, ubuntu3, that this job ran on runs 12.04 for compatibility
>>>>> reasons and as such has an old version of cmake. I've gone ahead and
>>>>> modified your job from the label "solaris||ubuntu" to
>>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>>>>>
>>>>> Cheers,
>>>>> -Pono
>>>>>
>>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>>
>>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>>>>>>
>>>>>> builds@, please help :)
>>>>>>
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Chris Mattmann, Ph.D.
>>>>>> Chief Architect
>>>>>> Instrument Software and Science Data Systems Section (398)
>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>> Office: 168-519, Mailstop: 168-527
>>>>>> Email: chris.a.mattmann@nasa.gov
>>>>>> WWW: http://sunset.usc.edu/~mattmann/
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Director, Information Retrieval and Data Science Group (IRDS)
>>>>>> Adjunct Associate Professor, Computer Science Department
>>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>>> WWW: http://irds.usc.edu/
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Matt Post <po...@cs.jhu.edu>
>>>>>> Reply-To: "dev@joshua.incubator.apache.org"
>>>>>> <de...@joshua.incubator.apache.org>
>>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
>>>>>> To: "dev@joshua.incubator.apache.org" <
>>> dev@joshua.incubator.apache.org>
>>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
>>>>>>
>>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
>>> version
>>>>>>> of cmake installed on build.apache.org...)
>>>>>>>
>>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>>>>
>>>>>>>> It looks like the first failure is at KenLM. I see:
>>>>>>>>
>>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
>>> running
>>>>>>>> version 2.8.7
>>>>>>>>
>>>>>>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> *Lewis*
>>>
>>
>
>
>
> --
> *Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Matt Post <po...@cs.jhu.edu>.
Lewis, have you already done this? Should I push something to trigger a rebuild?
> On Apr 1, 2016, at 12:48 PM, Lewis John Mcgibbney <le...@gmail.com> wrote:
>
> OK Andrew thank you Sir. For the time being we will restrict the
> joshua_master [0] to build on ubuntu slaves.
>
> https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/
>
> i suppose we will see the results Sir.
>
> On Fri, Apr 1, 2016 at 9:20 AM, Andrew Bayer <an...@gmail.com> wrote:
>
>> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
>> probably not. As always, if you need system libraries installed, we
>> strongly advise you run your build in a docker container, where you can
>> control things like that.
>>
>> A.
>>
>> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
>> lewis.mcgibbney@gmail.com> wrote:
>>
>>> Hi builds@,
>>> The named library is Boost http://www.boost.org/
>>> Is this library installed on any build slave?
>>>
>>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>>
>>>> Thanks very much! Some of our tests are now passing (17/39), but now I
>>> see
>>>> that it is unable to locate boost:
>>>>
>>>> [exec] Unable to find the requested Boost libraries.
>>>> [exec]
>>>> [exec] Boost version: 1.54.0
>>>> [exec]
>>>> [exec] Boost include path: /usr/include
>>>> [exec]
>>>> [exec] Could not find the following Boost libraries:
>>>> [exec]
>>>> [exec] boost_system
>>>> [exec] boost_thread
>>>> [exec]
>>>> [exec] Some (but not all) of the required Boost libraries were
>>>> found. You may
>>>> [exec] need to install these additional Boost libraries.
>>>> Alternatively, set
>>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
>>> libraries
>>>> or BOOST_ROOT
>>>> [exec] to the location of Boost.
>>>>
>>>> Can you suggest what we can do to address this?
>>>>
>>>>
>>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
>> wrote:
>>>>>
>>>>> The node, ubuntu3, that this job ran on runs 12.04 for compatibility
>>>>> reasons and as such has an old version of cmake. I've gone ahead and
>>>>> modified your job from the label "solaris||ubuntu" to
>>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>>>>>
>>>>> Cheers,
>>>>> -Pono
>>>>>
>>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>>
>>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>>>>>>
>>>>>> builds@, please help :)
>>>>>>
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Chris Mattmann, Ph.D.
>>>>>> Chief Architect
>>>>>> Instrument Software and Science Data Systems Section (398)
>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>> Office: 168-519, Mailstop: 168-527
>>>>>> Email: chris.a.mattmann@nasa.gov
>>>>>> WWW: http://sunset.usc.edu/~mattmann/
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Director, Information Retrieval and Data Science Group (IRDS)
>>>>>> Adjunct Associate Professor, Computer Science Department
>>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>>> WWW: http://irds.usc.edu/
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Matt Post <po...@cs.jhu.edu>
>>>>>> Reply-To: "dev@joshua.incubator.apache.org"
>>>>>> <de...@joshua.incubator.apache.org>
>>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
>>>>>> To: "dev@joshua.incubator.apache.org" <
>>> dev@joshua.incubator.apache.org>
>>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
>>>>>>
>>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
>>> version
>>>>>>> of cmake installed on build.apache.org...)
>>>>>>>
>>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>>>>
>>>>>>>> It looks like the first failure is at KenLM. I see:
>>>>>>>>
>>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
>>> running
>>>>>>>> version 2.8.7
>>>>>>>>
>>>>>>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> *Lewis*
>>>
>>
>
>
>
> --
> *Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Lewis John Mcgibbney <le...@gmail.com>.
OK Andrew thank you Sir. For the time being we will restrict the
joshua_master [0] to build on ubuntu slaves.
https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/
i suppose we will see the results Sir.
On Fri, Apr 1, 2016 at 9:20 AM, Andrew Bayer <an...@gmail.com> wrote:
> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
> probably not. As always, if you need system libraries installed, we
> strongly advise you run your build in a docker container, where you can
> control things like that.
>
> A.
>
> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
> lewis.mcgibbney@gmail.com> wrote:
>
> > Hi builds@,
> > The named library is Boost http://www.boost.org/
> > Is this library installed on any build slave?
> >
> > On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
> >
> > > Thanks very much! Some of our tests are now passing (17/39), but now I
> > see
> > > that it is unable to locate boost:
> > >
> > > [exec] Unable to find the requested Boost libraries.
> > > [exec]
> > > [exec] Boost version: 1.54.0
> > > [exec]
> > > [exec] Boost include path: /usr/include
> > > [exec]
> > > [exec] Could not find the following Boost libraries:
> > > [exec]
> > > [exec] boost_system
> > > [exec] boost_thread
> > > [exec]
> > > [exec] Some (but not all) of the required Boost libraries were
> > > found. You may
> > > [exec] need to install these additional Boost libraries.
> > > Alternatively, set
> > > [exec] BOOST_LIBRARYDIR to the directory containing Boost
> > libraries
> > > or BOOST_ROOT
> > > [exec] to the location of Boost.
> > >
> > > Can you suggest what we can do to address this?
> > >
> > >
> > > > On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
> wrote:
> > > >
> > > > The node, ubuntu3, that this job ran on runs 12.04 for compatibility
> > > > reasons and as such has an old version of cmake. I've gone ahead and
> > > > modified your job from the label "solaris||ubuntu" to
> > > > "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
> > > >
> > > > Cheers,
> > > > -Pono
> > > >
> > > > On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> > > > chris.a.mattmann@jpl.nasa.gov> wrote:
> > > >
> > > >> Send mail to builds@apache.org, I’ve CC’ed them on this message.
> > > >>
> > > >> builds@, please help :)
> > > >>
> > > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > >> Chris Mattmann, Ph.D.
> > > >> Chief Architect
> > > >> Instrument Software and Science Data Systems Section (398)
> > > >> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> > > >> Office: 168-519, Mailstop: 168-527
> > > >> Email: chris.a.mattmann@nasa.gov
> > > >> WWW: http://sunset.usc.edu/~mattmann/
> > > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > >> Director, Information Retrieval and Data Science Group (IRDS)
> > > >> Adjunct Associate Professor, Computer Science Department
> > > >> University of Southern California, Los Angeles, CA 90089 USA
> > > >> WWW: http://irds.usc.edu/
> > > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >> -----Original Message-----
> > > >> From: Matt Post <po...@cs.jhu.edu>
> > > >> Reply-To: "dev@joshua.incubator.apache.org"
> > > >> <de...@joshua.incubator.apache.org>
> > > >> Date: Thursday, March 31, 2016 at 4:59 PM
> > > >> To: "dev@joshua.incubator.apache.org" <
> > dev@joshua.incubator.apache.org>
> > > >> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> > > >> Subject: Re: Build failed in Jenkins: joshua_master #4
> > > >>
> > > >>> (To be clear, I'm asking if anyone knows how we can get a newer
> > version
> > > >>> of cmake installed on build.apache.org...)
> > > >>>
> > > >>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> > > >>>>
> > > >>>> It looks like the first failure is at KenLM. I see:
> > > >>>>
> > > >>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> > > >>>> [exec] CMake 2.8.8 or higher is required. You are
> > running
> > > >>>> version 2.8.7
> > > >>>>
> > > >>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
> > > >>>
> > > >>
> > > >>
> > >
> > >
> >
> >
> > --
> > *Lewis*
> >
>
--
*Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Lewis John Mcgibbney <le...@gmail.com>.
OK Andrew thank you Sir. For the time being we will restrict the
joshua_master [0] to build on ubuntu slaves.
https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/
i suppose we will see the results Sir.
On Fri, Apr 1, 2016 at 9:20 AM, Andrew Bayer <an...@gmail.com> wrote:
> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
> probably not. As always, if you need system libraries installed, we
> strongly advise you run your build in a docker container, where you can
> control things like that.
>
> A.
>
> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
> lewis.mcgibbney@gmail.com> wrote:
>
> > Hi builds@,
> > The named library is Boost http://www.boost.org/
> > Is this library installed on any build slave?
> >
> > On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
> >
> > > Thanks very much! Some of our tests are now passing (17/39), but now I
> > see
> > > that it is unable to locate boost:
> > >
> > > [exec] Unable to find the requested Boost libraries.
> > > [exec]
> > > [exec] Boost version: 1.54.0
> > > [exec]
> > > [exec] Boost include path: /usr/include
> > > [exec]
> > > [exec] Could not find the following Boost libraries:
> > > [exec]
> > > [exec] boost_system
> > > [exec] boost_thread
> > > [exec]
> > > [exec] Some (but not all) of the required Boost libraries were
> > > found. You may
> > > [exec] need to install these additional Boost libraries.
> > > Alternatively, set
> > > [exec] BOOST_LIBRARYDIR to the directory containing Boost
> > libraries
> > > or BOOST_ROOT
> > > [exec] to the location of Boost.
> > >
> > > Can you suggest what we can do to address this?
> > >
> > >
> > > > On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
> wrote:
> > > >
> > > > The node, ubuntu3, that this job ran on runs 12.04 for compatibility
> > > > reasons and as such has an old version of cmake. I've gone ahead and
> > > > modified your job from the label "solaris||ubuntu" to
> > > > "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
> > > >
> > > > Cheers,
> > > > -Pono
> > > >
> > > > On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> > > > chris.a.mattmann@jpl.nasa.gov> wrote:
> > > >
> > > >> Send mail to builds@apache.org, I’ve CC’ed them on this message.
> > > >>
> > > >> builds@, please help :)
> > > >>
> > > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > >> Chris Mattmann, Ph.D.
> > > >> Chief Architect
> > > >> Instrument Software and Science Data Systems Section (398)
> > > >> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> > > >> Office: 168-519, Mailstop: 168-527
> > > >> Email: chris.a.mattmann@nasa.gov
> > > >> WWW: http://sunset.usc.edu/~mattmann/
> > > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > >> Director, Information Retrieval and Data Science Group (IRDS)
> > > >> Adjunct Associate Professor, Computer Science Department
> > > >> University of Southern California, Los Angeles, CA 90089 USA
> > > >> WWW: http://irds.usc.edu/
> > > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >> -----Original Message-----
> > > >> From: Matt Post <po...@cs.jhu.edu>
> > > >> Reply-To: "dev@joshua.incubator.apache.org"
> > > >> <de...@joshua.incubator.apache.org>
> > > >> Date: Thursday, March 31, 2016 at 4:59 PM
> > > >> To: "dev@joshua.incubator.apache.org" <
> > dev@joshua.incubator.apache.org>
> > > >> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> > > >> Subject: Re: Build failed in Jenkins: joshua_master #4
> > > >>
> > > >>> (To be clear, I'm asking if anyone knows how we can get a newer
> > version
> > > >>> of cmake installed on build.apache.org...)
> > > >>>
> > > >>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> > > >>>>
> > > >>>> It looks like the first failure is at KenLM. I see:
> > > >>>>
> > > >>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> > > >>>> [exec] CMake 2.8.8 or higher is required. You are
> > running
> > > >>>> version 2.8.7
> > > >>>>
> > > >>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
> > > >>>
> > > >>
> > > >>
> > >
> > >
> >
> >
> > --
> > *Lewis*
> >
>
--
*Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Matt Post <po...@cs.jhu.edu>.
Yep
> On Apr 5, 2016, at 12:55 AM, Lewis John Mcgibbney <le...@gmail.com> wrote:
>
> Is this happening when you are trying to log in to Jenkins?
>
> On Mon, Apr 4, 2016 at 6:51 PM, Matt Post <po...@cs.jhu.edu> wrote:
>
>> "mjpost is missing the Job/ExtendedRead permission"
>>
>> → can you add me? Or do I need to email infrastructure?
>>
>> (Sorry for the constant questions!)
>>
>>
>>> On Apr 4, 2016, at 5:19 PM, Lewis John Mcgibbney <
>> lewis.mcgibbney@gmail.com> wrote:
>>>
>>> Hi Matt,
>>> This can be edited by going into the Jenkins job configuration tab [0]
>> and
>>> editing away.
>>> If it requests for a log in then this should be your LDAP credentials
>>> associated with your Apache ID.
>>> Ta
>>>
>>> [0]
>>>
>> https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/configure
>>>
>>> On Mon, Apr 4, 2016 at 2:17 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>>
>>>> How do we edit the build info? Is this something only you can do,
>> Lewis? I
>>>> see some problems that would be resolved by adding $JOSHUA/bin to the
>> path.
>>>>
>>>> matt
>>>>
>>>>
>>>>> On Apr 4, 2016, at 4:59 PM, Lewis John Mcgibbney <
>>>> lewis.mcgibbney@gmail.com> wrote:
>>>>>
>>>>> OK so the build is now stable.
>>>>> https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/10/
>>>>> We should still utilize the docker container on builds... this is a
>>>> better
>>>>> idea.
>>>>> We should also publish development documentation on each successful
>>>> build.
>>>>> This can be addressed over on
>>>>> https://issues.apache.org/jira/browse/JOSHUA-250
>>>>> Lewis
>>>>>
>>>>> On Mon, Apr 4, 2016 at 8:31 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> Also, note that the latest build failed because it's using Java 7, but
>>>>>> Kellen's recent commits require Java 8.
>>>>>>
>>>>>> This means that those commits sort of snuck in a required Java 8
>>>> upgrade.
>>>>>> I'm fine to do this as we're on development, and we can make that a
>>>> formal
>>>>>> requirement as part of the next release. Java 8 is not that new.
>>>>>>
>>>>>> matt
>>>>>>
>>>>>>
>>>>>>> On Apr 2, 2016, at 7:05 PM, Stian Soiland-Reyes <st...@apache.org>
>>>>>> wrote:
>>>>>>>
>>>>>>> BTW - which of the nodes support docker containers?
>>>>>>>
>>>>>>> On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com>
>> wrote:
>>>>>>>> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11.
>>>>>> Otherwise,
>>>>>>>> probably not. As always, if you need system libraries installed, we
>>>>>>>> strongly advise you run your build in a docker container, where you
>>>> can
>>>>>>>> control things like that.
>>>>>>>>
>>>>>>>> A.
>>>>>>>>
>>>>>>>> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
>>>>>>>> lewis.mcgibbney@gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hi builds@,
>>>>>>>>> The named library is Boost http://www.boost.org/
>>>>>>>>> Is this library installed on any build slave?
>>>>>>>>>
>>>>>>>>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>>>>>
>>>>>>>>>> Thanks very much! Some of our tests are now passing (17/39), but
>>>> now I
>>>>>>>>> see
>>>>>>>>>> that it is unable to locate boost:
>>>>>>>>>>
>>>>>>>>>> [exec] Unable to find the requested Boost libraries.
>>>>>>>>>> [exec]
>>>>>>>>>> [exec] Boost version: 1.54.0
>>>>>>>>>> [exec]
>>>>>>>>>> [exec] Boost include path: /usr/include
>>>>>>>>>> [exec]
>>>>>>>>>> [exec] Could not find the following Boost libraries:
>>>>>>>>>> [exec]
>>>>>>>>>> [exec] boost_system
>>>>>>>>>> [exec] boost_thread
>>>>>>>>>> [exec]
>>>>>>>>>> [exec] Some (but not all) of the required Boost libraries were
>>>>>>>>>> found. You may
>>>>>>>>>> [exec] need to install these additional Boost libraries.
>>>>>>>>>> Alternatively, set
>>>>>>>>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
>>>>>>>>> libraries
>>>>>>>>>> or BOOST_ROOT
>>>>>>>>>> [exec] to the location of Boost.
>>>>>>>>>>
>>>>>>>>>> Can you suggest what we can do to address this?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>> The node, ubuntu3, that this job ran on runs 12.04 for
>>>> compatibility
>>>>>>>>>>> reasons and as such has an old version of cmake. I've gone ahead
>>>> and
>>>>>>>>>>> modified your job from the label "solaris||ubuntu" to
>>>>>>>>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04
>> nodes.
>>>>>>>>>>>
>>>>>>>>>>> Cheers,
>>>>>>>>>>> -Pono
>>>>>>>>>>>
>>>>>>>>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
>>>>>>>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this
>> message.
>>>>>>>>>>>>
>>>>>>>>>>>> builds@, please help :)
>>>>>>>>>>>>
>>>>>>>>>>>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>>>>> Chris Mattmann, Ph.D.
>>>>>>>>>>>> Chief Architect
>>>>>>>>>>>> Instrument Software and Science Data Systems Section (398)
>>>>>>>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>>>>>>>> Office: 168-519, Mailstop: 168-527
>>>>>>>>>>>> Email: chris.a.mattmann@nasa.gov
>>>>>>>>>>>> WWW: http://sunset.usc.edu/~mattmann/
>>>>>>>>>>>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>>>>> Director, Information Retrieval and Data Science Group (IRDS)
>>>>>>>>>>>> Adjunct Associate Professor, Computer Science Department
>>>>>>>>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>>>>>>>>> WWW: http://irds.usc.edu/
>>>>>>>>>>>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>> From: Matt Post <po...@cs.jhu.edu>
>>>>>>>>>>>> Reply-To: "dev@joshua.incubator.apache.org"
>>>>>>>>>>>> <de...@joshua.incubator.apache.org>
>>>>>>>>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
>>>>>>>>>>>> To: "dev@joshua.incubator.apache.org" <
>>>>>>>>> dev@joshua.incubator.apache.org>
>>>>>>>>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>>>>>>>>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
>>>>>>>>>>>>
>>>>>>>>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
>>>>>>>>> version
>>>>>>>>>>>>> of cmake installed on build.apache.org...)
>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu>
>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> It looks like the first failure is at KenLM. I see:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>>>>>>>>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
>>>>>>>>> running
>>>>>>>>>>>>>> version 2.8.7
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Is there any way that this can be fixed? CMake on my Mac is
>>>> 3.4.3.
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> *Lewis*
>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Stian Soiland-Reyes
>>>>>>> Apache Taverna (incubating), Apache Commons RDF (incubating)
>>>>>>> http://orcid.org/0000-0001-9842-9718
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> *Lewis*
>>>>
>>>>
>>>
>>>
>>> --
>>> *Lewis*
>>
>>
>
>
> --
> *Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Lewis John Mcgibbney <le...@gmail.com>.
Is this happening when you are trying to log in to Jenkins?
On Mon, Apr 4, 2016 at 6:51 PM, Matt Post <po...@cs.jhu.edu> wrote:
> "mjpost is missing the Job/ExtendedRead permission"
>
> → can you add me? Or do I need to email infrastructure?
>
> (Sorry for the constant questions!)
>
>
> > On Apr 4, 2016, at 5:19 PM, Lewis John Mcgibbney <
> lewis.mcgibbney@gmail.com> wrote:
> >
> > Hi Matt,
> > This can be edited by going into the Jenkins job configuration tab [0]
> and
> > editing away.
> > If it requests for a log in then this should be your LDAP credentials
> > associated with your Apache ID.
> > Ta
> >
> > [0]
> >
> https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/configure
> >
> > On Mon, Apr 4, 2016 at 2:17 PM, Matt Post <po...@cs.jhu.edu> wrote:
> >
> >> How do we edit the build info? Is this something only you can do,
> Lewis? I
> >> see some problems that would be resolved by adding $JOSHUA/bin to the
> path.
> >>
> >> matt
> >>
> >>
> >>> On Apr 4, 2016, at 4:59 PM, Lewis John Mcgibbney <
> >> lewis.mcgibbney@gmail.com> wrote:
> >>>
> >>> OK so the build is now stable.
> >>> https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/10/
> >>> We should still utilize the docker container on builds... this is a
> >> better
> >>> idea.
> >>> We should also publish development documentation on each successful
> >> build.
> >>> This can be addressed over on
> >>> https://issues.apache.org/jira/browse/JOSHUA-250
> >>> Lewis
> >>>
> >>> On Mon, Apr 4, 2016 at 8:31 AM, Matt Post <po...@cs.jhu.edu> wrote:
> >>>
> >>>> Hi,
> >>>>
> >>>> Also, note that the latest build failed because it's using Java 7, but
> >>>> Kellen's recent commits require Java 8.
> >>>>
> >>>> This means that those commits sort of snuck in a required Java 8
> >> upgrade.
> >>>> I'm fine to do this as we're on development, and we can make that a
> >> formal
> >>>> requirement as part of the next release. Java 8 is not that new.
> >>>>
> >>>> matt
> >>>>
> >>>>
> >>>>> On Apr 2, 2016, at 7:05 PM, Stian Soiland-Reyes <st...@apache.org>
> >>>> wrote:
> >>>>>
> >>>>> BTW - which of the nodes support docker containers?
> >>>>>
> >>>>> On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com>
> wrote:
> >>>>>> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11.
> >>>> Otherwise,
> >>>>>> probably not. As always, if you need system libraries installed, we
> >>>>>> strongly advise you run your build in a docker container, where you
> >> can
> >>>>>> control things like that.
> >>>>>>
> >>>>>> A.
> >>>>>>
> >>>>>> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
> >>>>>> lewis.mcgibbney@gmail.com> wrote:
> >>>>>>
> >>>>>>> Hi builds@,
> >>>>>>> The named library is Boost http://www.boost.org/
> >>>>>>> Is this library installed on any build slave?
> >>>>>>>
> >>>>>>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
> >>>>>>>
> >>>>>>>> Thanks very much! Some of our tests are now passing (17/39), but
> >> now I
> >>>>>>> see
> >>>>>>>> that it is unable to locate boost:
> >>>>>>>>
> >>>>>>>> [exec] Unable to find the requested Boost libraries.
> >>>>>>>> [exec]
> >>>>>>>> [exec] Boost version: 1.54.0
> >>>>>>>> [exec]
> >>>>>>>> [exec] Boost include path: /usr/include
> >>>>>>>> [exec]
> >>>>>>>> [exec] Could not find the following Boost libraries:
> >>>>>>>> [exec]
> >>>>>>>> [exec] boost_system
> >>>>>>>> [exec] boost_thread
> >>>>>>>> [exec]
> >>>>>>>> [exec] Some (but not all) of the required Boost libraries were
> >>>>>>>> found. You may
> >>>>>>>> [exec] need to install these additional Boost libraries.
> >>>>>>>> Alternatively, set
> >>>>>>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
> >>>>>>> libraries
> >>>>>>>> or BOOST_ROOT
> >>>>>>>> [exec] to the location of Boost.
> >>>>>>>>
> >>>>>>>> Can you suggest what we can do to address this?
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
> >>>> wrote:
> >>>>>>>>>
> >>>>>>>>> The node, ubuntu3, that this job ran on runs 12.04 for
> >> compatibility
> >>>>>>>>> reasons and as such has an old version of cmake. I've gone ahead
> >> and
> >>>>>>>>> modified your job from the label "solaris||ubuntu" to
> >>>>>>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04
> nodes.
> >>>>>>>>>
> >>>>>>>>> Cheers,
> >>>>>>>>> -Pono
> >>>>>>>>>
> >>>>>>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> >>>>>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
> >>>>>>>>>
> >>>>>>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this
> message.
> >>>>>>>>>>
> >>>>>>>>>> builds@, please help :)
> >>>>>>>>>>
> >>>>>>>>>>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>>>>>> Chris Mattmann, Ph.D.
> >>>>>>>>>> Chief Architect
> >>>>>>>>>> Instrument Software and Science Data Systems Section (398)
> >>>>>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >>>>>>>>>> Office: 168-519, Mailstop: 168-527
> >>>>>>>>>> Email: chris.a.mattmann@nasa.gov
> >>>>>>>>>> WWW: http://sunset.usc.edu/~mattmann/
> >>>>>>>>>>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>>>>>> Director, Information Retrieval and Data Science Group (IRDS)
> >>>>>>>>>> Adjunct Associate Professor, Computer Science Department
> >>>>>>>>>> University of Southern California, Los Angeles, CA 90089 USA
> >>>>>>>>>> WWW: http://irds.usc.edu/
> >>>>>>>>>>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> -----Original Message-----
> >>>>>>>>>> From: Matt Post <po...@cs.jhu.edu>
> >>>>>>>>>> Reply-To: "dev@joshua.incubator.apache.org"
> >>>>>>>>>> <de...@joshua.incubator.apache.org>
> >>>>>>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
> >>>>>>>>>> To: "dev@joshua.incubator.apache.org" <
> >>>>>>> dev@joshua.incubator.apache.org>
> >>>>>>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> >>>>>>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
> >>>>>>>>>>
> >>>>>>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
> >>>>>>> version
> >>>>>>>>>>> of cmake installed on build.apache.org...)
> >>>>>>>>>>>
> >>>>>>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu>
> wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>> It looks like the first failure is at KenLM. I see:
> >>>>>>>>>>>>
> >>>>>>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> >>>>>>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
> >>>>>>> running
> >>>>>>>>>>>> version 2.8.7
> >>>>>>>>>>>>
> >>>>>>>>>>>> Is there any way that this can be fixed? CMake on my Mac is
> >> 3.4.3.
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> --
> >>>>>>> *Lewis*
> >>>>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Stian Soiland-Reyes
> >>>>> Apache Taverna (incubating), Apache Commons RDF (incubating)
> >>>>> http://orcid.org/0000-0001-9842-9718
> >>>>
> >>>>
> >>>
> >>>
> >>> --
> >>> *Lewis*
> >>
> >>
> >
> >
> > --
> > *Lewis*
>
>
--
*Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Matt Post <po...@cs.jhu.edu>.
"mjpost is missing the Job/ExtendedRead permission"
→ can you add me? Or do I need to email infrastructure?
(Sorry for the constant questions!)
> On Apr 4, 2016, at 5:19 PM, Lewis John Mcgibbney <le...@gmail.com> wrote:
>
> Hi Matt,
> This can be edited by going into the Jenkins job configuration tab [0] and
> editing away.
> If it requests for a log in then this should be your LDAP credentials
> associated with your Apache ID.
> Ta
>
> [0]
> https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/configure
>
> On Mon, Apr 4, 2016 at 2:17 PM, Matt Post <po...@cs.jhu.edu> wrote:
>
>> How do we edit the build info? Is this something only you can do, Lewis? I
>> see some problems that would be resolved by adding $JOSHUA/bin to the path.
>>
>> matt
>>
>>
>>> On Apr 4, 2016, at 4:59 PM, Lewis John Mcgibbney <
>> lewis.mcgibbney@gmail.com> wrote:
>>>
>>> OK so the build is now stable.
>>> https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/10/
>>> We should still utilize the docker container on builds... this is a
>> better
>>> idea.
>>> We should also publish development documentation on each successful
>> build.
>>> This can be addressed over on
>>> https://issues.apache.org/jira/browse/JOSHUA-250
>>> Lewis
>>>
>>> On Mon, Apr 4, 2016 at 8:31 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>>
>>>> Hi,
>>>>
>>>> Also, note that the latest build failed because it's using Java 7, but
>>>> Kellen's recent commits require Java 8.
>>>>
>>>> This means that those commits sort of snuck in a required Java 8
>> upgrade.
>>>> I'm fine to do this as we're on development, and we can make that a
>> formal
>>>> requirement as part of the next release. Java 8 is not that new.
>>>>
>>>> matt
>>>>
>>>>
>>>>> On Apr 2, 2016, at 7:05 PM, Stian Soiland-Reyes <st...@apache.org>
>>>> wrote:
>>>>>
>>>>> BTW - which of the nodes support docker containers?
>>>>>
>>>>> On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com> wrote:
>>>>>> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11.
>>>> Otherwise,
>>>>>> probably not. As always, if you need system libraries installed, we
>>>>>> strongly advise you run your build in a docker container, where you
>> can
>>>>>> control things like that.
>>>>>>
>>>>>> A.
>>>>>>
>>>>>> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
>>>>>> lewis.mcgibbney@gmail.com> wrote:
>>>>>>
>>>>>>> Hi builds@,
>>>>>>> The named library is Boost http://www.boost.org/
>>>>>>> Is this library installed on any build slave?
>>>>>>>
>>>>>>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>>>
>>>>>>>> Thanks very much! Some of our tests are now passing (17/39), but
>> now I
>>>>>>> see
>>>>>>>> that it is unable to locate boost:
>>>>>>>>
>>>>>>>> [exec] Unable to find the requested Boost libraries.
>>>>>>>> [exec]
>>>>>>>> [exec] Boost version: 1.54.0
>>>>>>>> [exec]
>>>>>>>> [exec] Boost include path: /usr/include
>>>>>>>> [exec]
>>>>>>>> [exec] Could not find the following Boost libraries:
>>>>>>>> [exec]
>>>>>>>> [exec] boost_system
>>>>>>>> [exec] boost_thread
>>>>>>>> [exec]
>>>>>>>> [exec] Some (but not all) of the required Boost libraries were
>>>>>>>> found. You may
>>>>>>>> [exec] need to install these additional Boost libraries.
>>>>>>>> Alternatively, set
>>>>>>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
>>>>>>> libraries
>>>>>>>> or BOOST_ROOT
>>>>>>>> [exec] to the location of Boost.
>>>>>>>>
>>>>>>>> Can you suggest what we can do to address this?
>>>>>>>>
>>>>>>>>
>>>>>>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
>>>> wrote:
>>>>>>>>>
>>>>>>>>> The node, ubuntu3, that this job ran on runs 12.04 for
>> compatibility
>>>>>>>>> reasons and as such has an old version of cmake. I've gone ahead
>> and
>>>>>>>>> modified your job from the label "solaris||ubuntu" to
>>>>>>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>>>>>>>>>
>>>>>>>>> Cheers,
>>>>>>>>> -Pono
>>>>>>>>>
>>>>>>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
>>>>>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>>>>>>
>>>>>>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>>>>>>>>>>
>>>>>>>>>> builds@, please help :)
>>>>>>>>>>
>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>>> Chris Mattmann, Ph.D.
>>>>>>>>>> Chief Architect
>>>>>>>>>> Instrument Software and Science Data Systems Section (398)
>>>>>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>>>>>> Office: 168-519, Mailstop: 168-527
>>>>>>>>>> Email: chris.a.mattmann@nasa.gov
>>>>>>>>>> WWW: http://sunset.usc.edu/~mattmann/
>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>>> Director, Information Retrieval and Data Science Group (IRDS)
>>>>>>>>>> Adjunct Associate Professor, Computer Science Department
>>>>>>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>>>>>>> WWW: http://irds.usc.edu/
>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> -----Original Message-----
>>>>>>>>>> From: Matt Post <po...@cs.jhu.edu>
>>>>>>>>>> Reply-To: "dev@joshua.incubator.apache.org"
>>>>>>>>>> <de...@joshua.incubator.apache.org>
>>>>>>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
>>>>>>>>>> To: "dev@joshua.incubator.apache.org" <
>>>>>>> dev@joshua.incubator.apache.org>
>>>>>>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>>>>>>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
>>>>>>>>>>
>>>>>>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
>>>>>>> version
>>>>>>>>>>> of cmake installed on build.apache.org...)
>>>>>>>>>>>
>>>>>>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> It looks like the first failure is at KenLM. I see:
>>>>>>>>>>>>
>>>>>>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>>>>>>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
>>>>>>> running
>>>>>>>>>>>> version 2.8.7
>>>>>>>>>>>>
>>>>>>>>>>>> Is there any way that this can be fixed? CMake on my Mac is
>> 3.4.3.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> *Lewis*
>>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Stian Soiland-Reyes
>>>>> Apache Taverna (incubating), Apache Commons RDF (incubating)
>>>>> http://orcid.org/0000-0001-9842-9718
>>>>
>>>>
>>>
>>>
>>> --
>>> *Lewis*
>>
>>
>
>
> --
> *Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Lewis John Mcgibbney <le...@gmail.com>.
Hi Matt,
This can be edited by going into the Jenkins job configuration tab [0] and
editing away.
If it requests for a log in then this should be your LDAP credentials
associated with your Apache ID.
Ta
[0]
https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/configure
On Mon, Apr 4, 2016 at 2:17 PM, Matt Post <po...@cs.jhu.edu> wrote:
> How do we edit the build info? Is this something only you can do, Lewis? I
> see some problems that would be resolved by adding $JOSHUA/bin to the path.
>
> matt
>
>
> > On Apr 4, 2016, at 4:59 PM, Lewis John Mcgibbney <
> lewis.mcgibbney@gmail.com> wrote:
> >
> > OK so the build is now stable.
> > https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/10/
> > We should still utilize the docker container on builds... this is a
> better
> > idea.
> > We should also publish development documentation on each successful
> build.
> > This can be addressed over on
> > https://issues.apache.org/jira/browse/JOSHUA-250
> > Lewis
> >
> > On Mon, Apr 4, 2016 at 8:31 AM, Matt Post <po...@cs.jhu.edu> wrote:
> >
> >> Hi,
> >>
> >> Also, note that the latest build failed because it's using Java 7, but
> >> Kellen's recent commits require Java 8.
> >>
> >> This means that those commits sort of snuck in a required Java 8
> upgrade.
> >> I'm fine to do this as we're on development, and we can make that a
> formal
> >> requirement as part of the next release. Java 8 is not that new.
> >>
> >> matt
> >>
> >>
> >>> On Apr 2, 2016, at 7:05 PM, Stian Soiland-Reyes <st...@apache.org>
> >> wrote:
> >>>
> >>> BTW - which of the nodes support docker containers?
> >>>
> >>> On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com> wrote:
> >>>> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11.
> >> Otherwise,
> >>>> probably not. As always, if you need system libraries installed, we
> >>>> strongly advise you run your build in a docker container, where you
> can
> >>>> control things like that.
> >>>>
> >>>> A.
> >>>>
> >>>> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
> >>>> lewis.mcgibbney@gmail.com> wrote:
> >>>>
> >>>>> Hi builds@,
> >>>>> The named library is Boost http://www.boost.org/
> >>>>> Is this library installed on any build slave?
> >>>>>
> >>>>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
> >>>>>
> >>>>>> Thanks very much! Some of our tests are now passing (17/39), but
> now I
> >>>>> see
> >>>>>> that it is unable to locate boost:
> >>>>>>
> >>>>>> [exec] Unable to find the requested Boost libraries.
> >>>>>> [exec]
> >>>>>> [exec] Boost version: 1.54.0
> >>>>>> [exec]
> >>>>>> [exec] Boost include path: /usr/include
> >>>>>> [exec]
> >>>>>> [exec] Could not find the following Boost libraries:
> >>>>>> [exec]
> >>>>>> [exec] boost_system
> >>>>>> [exec] boost_thread
> >>>>>> [exec]
> >>>>>> [exec] Some (but not all) of the required Boost libraries were
> >>>>>> found. You may
> >>>>>> [exec] need to install these additional Boost libraries.
> >>>>>> Alternatively, set
> >>>>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
> >>>>> libraries
> >>>>>> or BOOST_ROOT
> >>>>>> [exec] to the location of Boost.
> >>>>>>
> >>>>>> Can you suggest what we can do to address this?
> >>>>>>
> >>>>>>
> >>>>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
> >> wrote:
> >>>>>>>
> >>>>>>> The node, ubuntu3, that this job ran on runs 12.04 for
> compatibility
> >>>>>>> reasons and as such has an old version of cmake. I've gone ahead
> and
> >>>>>>> modified your job from the label "solaris||ubuntu" to
> >>>>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
> >>>>>>>
> >>>>>>> Cheers,
> >>>>>>> -Pono
> >>>>>>>
> >>>>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> >>>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
> >>>>>>>
> >>>>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
> >>>>>>>>
> >>>>>>>> builds@, please help :)
> >>>>>>>>
> >>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>>>> Chris Mattmann, Ph.D.
> >>>>>>>> Chief Architect
> >>>>>>>> Instrument Software and Science Data Systems Section (398)
> >>>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >>>>>>>> Office: 168-519, Mailstop: 168-527
> >>>>>>>> Email: chris.a.mattmann@nasa.gov
> >>>>>>>> WWW: http://sunset.usc.edu/~mattmann/
> >>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>>>> Director, Information Retrieval and Data Science Group (IRDS)
> >>>>>>>> Adjunct Associate Professor, Computer Science Department
> >>>>>>>> University of Southern California, Los Angeles, CA 90089 USA
> >>>>>>>> WWW: http://irds.usc.edu/
> >>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> -----Original Message-----
> >>>>>>>> From: Matt Post <po...@cs.jhu.edu>
> >>>>>>>> Reply-To: "dev@joshua.incubator.apache.org"
> >>>>>>>> <de...@joshua.incubator.apache.org>
> >>>>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
> >>>>>>>> To: "dev@joshua.incubator.apache.org" <
> >>>>> dev@joshua.incubator.apache.org>
> >>>>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> >>>>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
> >>>>>>>>
> >>>>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
> >>>>> version
> >>>>>>>>> of cmake installed on build.apache.org...)
> >>>>>>>>>
> >>>>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> >>>>>>>>>>
> >>>>>>>>>> It looks like the first failure is at KenLM. I see:
> >>>>>>>>>>
> >>>>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> >>>>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
> >>>>> running
> >>>>>>>>>> version 2.8.7
> >>>>>>>>>>
> >>>>>>>>>> Is there any way that this can be fixed? CMake on my Mac is
> 3.4.3.
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> *Lewis*
> >>>>>
> >>>
> >>>
> >>>
> >>> --
> >>> Stian Soiland-Reyes
> >>> Apache Taverna (incubating), Apache Commons RDF (incubating)
> >>> http://orcid.org/0000-0001-9842-9718
> >>
> >>
> >
> >
> > --
> > *Lewis*
>
>
--
*Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Matt Post <po...@cs.jhu.edu>.
How do we edit the build info? Is this something only you can do, Lewis? I see some problems that would be resolved by adding $JOSHUA/bin to the path.
matt
> On Apr 4, 2016, at 4:59 PM, Lewis John Mcgibbney <le...@gmail.com> wrote:
>
> OK so the build is now stable.
> https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/10/
> We should still utilize the docker container on builds... this is a better
> idea.
> We should also publish development documentation on each successful build.
> This can be addressed over on
> https://issues.apache.org/jira/browse/JOSHUA-250
> Lewis
>
> On Mon, Apr 4, 2016 at 8:31 AM, Matt Post <po...@cs.jhu.edu> wrote:
>
>> Hi,
>>
>> Also, note that the latest build failed because it's using Java 7, but
>> Kellen's recent commits require Java 8.
>>
>> This means that those commits sort of snuck in a required Java 8 upgrade.
>> I'm fine to do this as we're on development, and we can make that a formal
>> requirement as part of the next release. Java 8 is not that new.
>>
>> matt
>>
>>
>>> On Apr 2, 2016, at 7:05 PM, Stian Soiland-Reyes <st...@apache.org>
>> wrote:
>>>
>>> BTW - which of the nodes support docker containers?
>>>
>>> On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com> wrote:
>>>> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11.
>> Otherwise,
>>>> probably not. As always, if you need system libraries installed, we
>>>> strongly advise you run your build in a docker container, where you can
>>>> control things like that.
>>>>
>>>> A.
>>>>
>>>> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
>>>> lewis.mcgibbney@gmail.com> wrote:
>>>>
>>>>> Hi builds@,
>>>>> The named library is Boost http://www.boost.org/
>>>>> Is this library installed on any build slave?
>>>>>
>>>>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>
>>>>>> Thanks very much! Some of our tests are now passing (17/39), but now I
>>>>> see
>>>>>> that it is unable to locate boost:
>>>>>>
>>>>>> [exec] Unable to find the requested Boost libraries.
>>>>>> [exec]
>>>>>> [exec] Boost version: 1.54.0
>>>>>> [exec]
>>>>>> [exec] Boost include path: /usr/include
>>>>>> [exec]
>>>>>> [exec] Could not find the following Boost libraries:
>>>>>> [exec]
>>>>>> [exec] boost_system
>>>>>> [exec] boost_thread
>>>>>> [exec]
>>>>>> [exec] Some (but not all) of the required Boost libraries were
>>>>>> found. You may
>>>>>> [exec] need to install these additional Boost libraries.
>>>>>> Alternatively, set
>>>>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
>>>>> libraries
>>>>>> or BOOST_ROOT
>>>>>> [exec] to the location of Boost.
>>>>>>
>>>>>> Can you suggest what we can do to address this?
>>>>>>
>>>>>>
>>>>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
>> wrote:
>>>>>>>
>>>>>>> The node, ubuntu3, that this job ran on runs 12.04 for compatibility
>>>>>>> reasons and as such has an old version of cmake. I've gone ahead and
>>>>>>> modified your job from the label "solaris||ubuntu" to
>>>>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>>>>>>>
>>>>>>> Cheers,
>>>>>>> -Pono
>>>>>>>
>>>>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
>>>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>>>>
>>>>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>>>>>>>>
>>>>>>>> builds@, please help :)
>>>>>>>>
>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>> Chris Mattmann, Ph.D.
>>>>>>>> Chief Architect
>>>>>>>> Instrument Software and Science Data Systems Section (398)
>>>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>>>> Office: 168-519, Mailstop: 168-527
>>>>>>>> Email: chris.a.mattmann@nasa.gov
>>>>>>>> WWW: http://sunset.usc.edu/~mattmann/
>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>> Director, Information Retrieval and Data Science Group (IRDS)
>>>>>>>> Adjunct Associate Professor, Computer Science Department
>>>>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>>>>> WWW: http://irds.usc.edu/
>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: Matt Post <po...@cs.jhu.edu>
>>>>>>>> Reply-To: "dev@joshua.incubator.apache.org"
>>>>>>>> <de...@joshua.incubator.apache.org>
>>>>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
>>>>>>>> To: "dev@joshua.incubator.apache.org" <
>>>>> dev@joshua.incubator.apache.org>
>>>>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>>>>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
>>>>>>>>
>>>>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
>>>>> version
>>>>>>>>> of cmake installed on build.apache.org...)
>>>>>>>>>
>>>>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>>>>>>
>>>>>>>>>> It looks like the first failure is at KenLM. I see:
>>>>>>>>>>
>>>>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>>>>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
>>>>> running
>>>>>>>>>> version 2.8.7
>>>>>>>>>>
>>>>>>>>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> *Lewis*
>>>>>
>>>
>>>
>>>
>>> --
>>> Stian Soiland-Reyes
>>> Apache Taverna (incubating), Apache Commons RDF (incubating)
>>> http://orcid.org/0000-0001-9842-9718
>>
>>
>
>
> --
> *Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Lewis John Mcgibbney <le...@gmail.com>.
OK so the build is now stable.
https://builds.apache.org/view/H-L/view/Joshua/job/joshua_master/10/
We should still utilize the docker container on builds... this is a better
idea.
We should also publish development documentation on each successful build.
This can be addressed over on
https://issues.apache.org/jira/browse/JOSHUA-250
Lewis
On Mon, Apr 4, 2016 at 8:31 AM, Matt Post <po...@cs.jhu.edu> wrote:
> Hi,
>
> Also, note that the latest build failed because it's using Java 7, but
> Kellen's recent commits require Java 8.
>
> This means that those commits sort of snuck in a required Java 8 upgrade.
> I'm fine to do this as we're on development, and we can make that a formal
> requirement as part of the next release. Java 8 is not that new.
>
> matt
>
>
> > On Apr 2, 2016, at 7:05 PM, Stian Soiland-Reyes <st...@apache.org>
> wrote:
> >
> > BTW - which of the nodes support docker containers?
> >
> > On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com> wrote:
> >> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11.
> Otherwise,
> >> probably not. As always, if you need system libraries installed, we
> >> strongly advise you run your build in a docker container, where you can
> >> control things like that.
> >>
> >> A.
> >>
> >> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
> >> lewis.mcgibbney@gmail.com> wrote:
> >>
> >>> Hi builds@,
> >>> The named library is Boost http://www.boost.org/
> >>> Is this library installed on any build slave?
> >>>
> >>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
> >>>
> >>>> Thanks very much! Some of our tests are now passing (17/39), but now I
> >>> see
> >>>> that it is unable to locate boost:
> >>>>
> >>>> [exec] Unable to find the requested Boost libraries.
> >>>> [exec]
> >>>> [exec] Boost version: 1.54.0
> >>>> [exec]
> >>>> [exec] Boost include path: /usr/include
> >>>> [exec]
> >>>> [exec] Could not find the following Boost libraries:
> >>>> [exec]
> >>>> [exec] boost_system
> >>>> [exec] boost_thread
> >>>> [exec]
> >>>> [exec] Some (but not all) of the required Boost libraries were
> >>>> found. You may
> >>>> [exec] need to install these additional Boost libraries.
> >>>> Alternatively, set
> >>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
> >>> libraries
> >>>> or BOOST_ROOT
> >>>> [exec] to the location of Boost.
> >>>>
> >>>> Can you suggest what we can do to address this?
> >>>>
> >>>>
> >>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org>
> wrote:
> >>>>>
> >>>>> The node, ubuntu3, that this job ran on runs 12.04 for compatibility
> >>>>> reasons and as such has an old version of cmake. I've gone ahead and
> >>>>> modified your job from the label "solaris||ubuntu" to
> >>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
> >>>>>
> >>>>> Cheers,
> >>>>> -Pono
> >>>>>
> >>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> >>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
> >>>>>
> >>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
> >>>>>>
> >>>>>> builds@, please help :)
> >>>>>>
> >>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>> Chris Mattmann, Ph.D.
> >>>>>> Chief Architect
> >>>>>> Instrument Software and Science Data Systems Section (398)
> >>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >>>>>> Office: 168-519, Mailstop: 168-527
> >>>>>> Email: chris.a.mattmann@nasa.gov
> >>>>>> WWW: http://sunset.usc.edu/~mattmann/
> >>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>> Director, Information Retrieval and Data Science Group (IRDS)
> >>>>>> Adjunct Associate Professor, Computer Science Department
> >>>>>> University of Southern California, Los Angeles, CA 90089 USA
> >>>>>> WWW: http://irds.usc.edu/
> >>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> -----Original Message-----
> >>>>>> From: Matt Post <po...@cs.jhu.edu>
> >>>>>> Reply-To: "dev@joshua.incubator.apache.org"
> >>>>>> <de...@joshua.incubator.apache.org>
> >>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
> >>>>>> To: "dev@joshua.incubator.apache.org" <
> >>> dev@joshua.incubator.apache.org>
> >>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> >>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
> >>>>>>
> >>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
> >>> version
> >>>>>>> of cmake installed on build.apache.org...)
> >>>>>>>
> >>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> >>>>>>>>
> >>>>>>>> It looks like the first failure is at KenLM. I see:
> >>>>>>>>
> >>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> >>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
> >>> running
> >>>>>>>> version 2.8.7
> >>>>>>>>
> >>>>>>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>
> >>>>
> >>>
> >>>
> >>> --
> >>> *Lewis*
> >>>
> >
> >
> >
> > --
> > Stian Soiland-Reyes
> > Apache Taverna (incubating), Apache Commons RDF (incubating)
> > http://orcid.org/0000-0001-9842-9718
>
>
--
*Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Matt Post <po...@cs.jhu.edu>.
Hi,
Also, note that the latest build failed because it's using Java 7, but Kellen's recent commits require Java 8.
This means that those commits sort of snuck in a required Java 8 upgrade. I'm fine to do this as we're on development, and we can make that a formal requirement as part of the next release. Java 8 is not that new.
matt
> On Apr 2, 2016, at 7:05 PM, Stian Soiland-Reyes <st...@apache.org> wrote:
>
> BTW - which of the nodes support docker containers?
>
> On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com> wrote:
>> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
>> probably not. As always, if you need system libraries installed, we
>> strongly advise you run your build in a docker container, where you can
>> control things like that.
>>
>> A.
>>
>> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
>> lewis.mcgibbney@gmail.com> wrote:
>>
>>> Hi builds@,
>>> The named library is Boost http://www.boost.org/
>>> Is this library installed on any build slave?
>>>
>>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>>
>>>> Thanks very much! Some of our tests are now passing (17/39), but now I
>>> see
>>>> that it is unable to locate boost:
>>>>
>>>> [exec] Unable to find the requested Boost libraries.
>>>> [exec]
>>>> [exec] Boost version: 1.54.0
>>>> [exec]
>>>> [exec] Boost include path: /usr/include
>>>> [exec]
>>>> [exec] Could not find the following Boost libraries:
>>>> [exec]
>>>> [exec] boost_system
>>>> [exec] boost_thread
>>>> [exec]
>>>> [exec] Some (but not all) of the required Boost libraries were
>>>> found. You may
>>>> [exec] need to install these additional Boost libraries.
>>>> Alternatively, set
>>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
>>> libraries
>>>> or BOOST_ROOT
>>>> [exec] to the location of Boost.
>>>>
>>>> Can you suggest what we can do to address this?
>>>>
>>>>
>>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
>>>>>
>>>>> The node, ubuntu3, that this job ran on runs 12.04 for compatibility
>>>>> reasons and as such has an old version of cmake. I've gone ahead and
>>>>> modified your job from the label "solaris||ubuntu" to
>>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>>>>>
>>>>> Cheers,
>>>>> -Pono
>>>>>
>>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>>
>>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>>>>>>
>>>>>> builds@, please help :)
>>>>>>
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Chris Mattmann, Ph.D.
>>>>>> Chief Architect
>>>>>> Instrument Software and Science Data Systems Section (398)
>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>> Office: 168-519, Mailstop: 168-527
>>>>>> Email: chris.a.mattmann@nasa.gov
>>>>>> WWW: http://sunset.usc.edu/~mattmann/
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Director, Information Retrieval and Data Science Group (IRDS)
>>>>>> Adjunct Associate Professor, Computer Science Department
>>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>>> WWW: http://irds.usc.edu/
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Matt Post <po...@cs.jhu.edu>
>>>>>> Reply-To: "dev@joshua.incubator.apache.org"
>>>>>> <de...@joshua.incubator.apache.org>
>>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
>>>>>> To: "dev@joshua.incubator.apache.org" <
>>> dev@joshua.incubator.apache.org>
>>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
>>>>>>
>>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
>>> version
>>>>>>> of cmake installed on build.apache.org...)
>>>>>>>
>>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>>>>
>>>>>>>> It looks like the first failure is at KenLM. I see:
>>>>>>>>
>>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
>>> running
>>>>>>>> version 2.8.7
>>>>>>>>
>>>>>>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> *Lewis*
>>>
>
>
>
> --
> Stian Soiland-Reyes
> Apache Taverna (incubating), Apache Commons RDF (incubating)
> http://orcid.org/0000-0001-9842-9718
Re: Build failed in Jenkins: joshua_master #4
Posted by Matt Post <po...@cs.jhu.edu>.
Hi,
Also, note that the latest build failed because it's using Java 7, but Kellen's recent commits require Java 8.
This means that those commits sort of snuck in a required Java 8 upgrade. I'm fine to do this as we're on development, and we can make that a formal requirement as part of the next release. Java 8 is not that new.
matt
> On Apr 2, 2016, at 7:05 PM, Stian Soiland-Reyes <st...@apache.org> wrote:
>
> BTW - which of the nodes support docker containers?
>
> On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com> wrote:
>> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
>> probably not. As always, if you need system libraries installed, we
>> strongly advise you run your build in a docker container, where you can
>> control things like that.
>>
>> A.
>>
>> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
>> lewis.mcgibbney@gmail.com> wrote:
>>
>>> Hi builds@,
>>> The named library is Boost http://www.boost.org/
>>> Is this library installed on any build slave?
>>>
>>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>>
>>>> Thanks very much! Some of our tests are now passing (17/39), but now I
>>> see
>>>> that it is unable to locate boost:
>>>>
>>>> [exec] Unable to find the requested Boost libraries.
>>>> [exec]
>>>> [exec] Boost version: 1.54.0
>>>> [exec]
>>>> [exec] Boost include path: /usr/include
>>>> [exec]
>>>> [exec] Could not find the following Boost libraries:
>>>> [exec]
>>>> [exec] boost_system
>>>> [exec] boost_thread
>>>> [exec]
>>>> [exec] Some (but not all) of the required Boost libraries were
>>>> found. You may
>>>> [exec] need to install these additional Boost libraries.
>>>> Alternatively, set
>>>> [exec] BOOST_LIBRARYDIR to the directory containing Boost
>>> libraries
>>>> or BOOST_ROOT
>>>> [exec] to the location of Boost.
>>>>
>>>> Can you suggest what we can do to address this?
>>>>
>>>>
>>>>> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
>>>>>
>>>>> The node, ubuntu3, that this job ran on runs 12.04 for compatibility
>>>>> reasons and as such has an old version of cmake. I've gone ahead and
>>>>> modified your job from the label "solaris||ubuntu" to
>>>>> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>>>>>
>>>>> Cheers,
>>>>> -Pono
>>>>>
>>>>> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>>
>>>>>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>>>>>>
>>>>>> builds@, please help :)
>>>>>>
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Chris Mattmann, Ph.D.
>>>>>> Chief Architect
>>>>>> Instrument Software and Science Data Systems Section (398)
>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>> Office: 168-519, Mailstop: 168-527
>>>>>> Email: chris.a.mattmann@nasa.gov
>>>>>> WWW: http://sunset.usc.edu/~mattmann/
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Director, Information Retrieval and Data Science Group (IRDS)
>>>>>> Adjunct Associate Professor, Computer Science Department
>>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>>> WWW: http://irds.usc.edu/
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Matt Post <po...@cs.jhu.edu>
>>>>>> Reply-To: "dev@joshua.incubator.apache.org"
>>>>>> <de...@joshua.incubator.apache.org>
>>>>>> Date: Thursday, March 31, 2016 at 4:59 PM
>>>>>> To: "dev@joshua.incubator.apache.org" <
>>> dev@joshua.incubator.apache.org>
>>>>>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>>>>>> Subject: Re: Build failed in Jenkins: joshua_master #4
>>>>>>
>>>>>>> (To be clear, I'm asking if anyone knows how we can get a newer
>>> version
>>>>>>> of cmake installed on build.apache.org...)
>>>>>>>
>>>>>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>>>>>
>>>>>>>> It looks like the first failure is at KenLM. I see:
>>>>>>>>
>>>>>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>>>>>>>> [exec] CMake 2.8.8 or higher is required. You are
>>> running
>>>>>>>> version 2.8.7
>>>>>>>>
>>>>>>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> *Lewis*
>>>
>
>
>
> --
> Stian Soiland-Reyes
> Apache Taverna (incubating), Apache Commons RDF (incubating)
> http://orcid.org/0000-0001-9842-9718
Re: Build failed in Jenkins: joshua_master #4
Posted by Stian Soiland-Reyes <st...@apache.org>.
BTW - which of the nodes support docker containers?
On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com> wrote:
> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
> probably not. As always, if you need system libraries installed, we
> strongly advise you run your build in a docker container, where you can
> control things like that.
>
> A.
>
> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
> lewis.mcgibbney@gmail.com> wrote:
>
>> Hi builds@,
>> The named library is Boost http://www.boost.org/
>> Is this library installed on any build slave?
>>
>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>
>> > Thanks very much! Some of our tests are now passing (17/39), but now I
>> see
>> > that it is unable to locate boost:
>> >
>> > [exec] Unable to find the requested Boost libraries.
>> > [exec]
>> > [exec] Boost version: 1.54.0
>> > [exec]
>> > [exec] Boost include path: /usr/include
>> > [exec]
>> > [exec] Could not find the following Boost libraries:
>> > [exec]
>> > [exec] boost_system
>> > [exec] boost_thread
>> > [exec]
>> > [exec] Some (but not all) of the required Boost libraries were
>> > found. You may
>> > [exec] need to install these additional Boost libraries.
>> > Alternatively, set
>> > [exec] BOOST_LIBRARYDIR to the directory containing Boost
>> libraries
>> > or BOOST_ROOT
>> > [exec] to the location of Boost.
>> >
>> > Can you suggest what we can do to address this?
>> >
>> >
>> > > On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
>> > >
>> > > The node, ubuntu3, that this job ran on runs 12.04 for compatibility
>> > > reasons and as such has an old version of cmake. I've gone ahead and
>> > > modified your job from the label "solaris||ubuntu" to
>> > > "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>> > >
>> > > Cheers,
>> > > -Pono
>> > >
>> > > On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
>> > > chris.a.mattmann@jpl.nasa.gov> wrote:
>> > >
>> > >> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>> > >>
>> > >> builds@, please help :)
>> > >>
>> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> > >> Chris Mattmann, Ph.D.
>> > >> Chief Architect
>> > >> Instrument Software and Science Data Systems Section (398)
>> > >> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> > >> Office: 168-519, Mailstop: 168-527
>> > >> Email: chris.a.mattmann@nasa.gov
>> > >> WWW: http://sunset.usc.edu/~mattmann/
>> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> > >> Director, Information Retrieval and Data Science Group (IRDS)
>> > >> Adjunct Associate Professor, Computer Science Department
>> > >> University of Southern California, Los Angeles, CA 90089 USA
>> > >> WWW: http://irds.usc.edu/
>> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> > >>
>> > >>
>> > >>
>> > >>
>> > >>
>> > >> -----Original Message-----
>> > >> From: Matt Post <po...@cs.jhu.edu>
>> > >> Reply-To: "dev@joshua.incubator.apache.org"
>> > >> <de...@joshua.incubator.apache.org>
>> > >> Date: Thursday, March 31, 2016 at 4:59 PM
>> > >> To: "dev@joshua.incubator.apache.org" <
>> dev@joshua.incubator.apache.org>
>> > >> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>> > >> Subject: Re: Build failed in Jenkins: joshua_master #4
>> > >>
>> > >>> (To be clear, I'm asking if anyone knows how we can get a newer
>> version
>> > >>> of cmake installed on build.apache.org...)
>> > >>>
>> > >>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>> > >>>>
>> > >>>> It looks like the first failure is at KenLM. I see:
>> > >>>>
>> > >>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>> > >>>> [exec] CMake 2.8.8 or higher is required. You are
>> running
>> > >>>> version 2.8.7
>> > >>>>
>> > >>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>> > >>>
>> > >>
>> > >>
>> >
>> >
>>
>>
>> --
>> *Lewis*
>>
--
Stian Soiland-Reyes
Apache Taverna (incubating), Apache Commons RDF (incubating)
http://orcid.org/0000-0001-9842-9718
Re: Build failed in Jenkins: joshua_master #4
Posted by Stian Soiland-Reyes <st...@apache.org>.
BTW - which of the nodes support docker containers?
On 1 April 2016 at 17:20, Andrew Bayer <an...@gmail.com> wrote:
> Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
> probably not. As always, if you need system libraries installed, we
> strongly advise you run your build in a docker container, where you can
> control things like that.
>
> A.
>
> On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
> lewis.mcgibbney@gmail.com> wrote:
>
>> Hi builds@,
>> The named library is Boost http://www.boost.org/
>> Is this library installed on any build slave?
>>
>> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>>
>> > Thanks very much! Some of our tests are now passing (17/39), but now I
>> see
>> > that it is unable to locate boost:
>> >
>> > [exec] Unable to find the requested Boost libraries.
>> > [exec]
>> > [exec] Boost version: 1.54.0
>> > [exec]
>> > [exec] Boost include path: /usr/include
>> > [exec]
>> > [exec] Could not find the following Boost libraries:
>> > [exec]
>> > [exec] boost_system
>> > [exec] boost_thread
>> > [exec]
>> > [exec] Some (but not all) of the required Boost libraries were
>> > found. You may
>> > [exec] need to install these additional Boost libraries.
>> > Alternatively, set
>> > [exec] BOOST_LIBRARYDIR to the directory containing Boost
>> libraries
>> > or BOOST_ROOT
>> > [exec] to the location of Boost.
>> >
>> > Can you suggest what we can do to address this?
>> >
>> >
>> > > On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
>> > >
>> > > The node, ubuntu3, that this job ran on runs 12.04 for compatibility
>> > > reasons and as such has an old version of cmake. I've gone ahead and
>> > > modified your job from the label "solaris||ubuntu" to
>> > > "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>> > >
>> > > Cheers,
>> > > -Pono
>> > >
>> > > On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
>> > > chris.a.mattmann@jpl.nasa.gov> wrote:
>> > >
>> > >> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>> > >>
>> > >> builds@, please help :)
>> > >>
>> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> > >> Chris Mattmann, Ph.D.
>> > >> Chief Architect
>> > >> Instrument Software and Science Data Systems Section (398)
>> > >> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> > >> Office: 168-519, Mailstop: 168-527
>> > >> Email: chris.a.mattmann@nasa.gov
>> > >> WWW: http://sunset.usc.edu/~mattmann/
>> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> > >> Director, Information Retrieval and Data Science Group (IRDS)
>> > >> Adjunct Associate Professor, Computer Science Department
>> > >> University of Southern California, Los Angeles, CA 90089 USA
>> > >> WWW: http://irds.usc.edu/
>> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> > >>
>> > >>
>> > >>
>> > >>
>> > >>
>> > >> -----Original Message-----
>> > >> From: Matt Post <po...@cs.jhu.edu>
>> > >> Reply-To: "dev@joshua.incubator.apache.org"
>> > >> <de...@joshua.incubator.apache.org>
>> > >> Date: Thursday, March 31, 2016 at 4:59 PM
>> > >> To: "dev@joshua.incubator.apache.org" <
>> dev@joshua.incubator.apache.org>
>> > >> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>> > >> Subject: Re: Build failed in Jenkins: joshua_master #4
>> > >>
>> > >>> (To be clear, I'm asking if anyone knows how we can get a newer
>> version
>> > >>> of cmake installed on build.apache.org...)
>> > >>>
>> > >>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>> > >>>>
>> > >>>> It looks like the first failure is at KenLM. I see:
>> > >>>>
>> > >>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>> > >>>> [exec] CMake 2.8.8 or higher is required. You are
>> running
>> > >>>> version 2.8.7
>> > >>>>
>> > >>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>> > >>>
>> > >>
>> > >>
>> >
>> >
>>
>>
>> --
>> *Lewis*
>>
--
Stian Soiland-Reyes
Apache Taverna (incubating), Apache Commons RDF (incubating)
http://orcid.org/0000-0001-9842-9718
Re: Build failed in Jenkins: joshua_master #4
Posted by Andrew Bayer <an...@gmail.com>.
Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
probably not. As always, if you need system libraries installed, we
strongly advise you run your build in a docker container, where you can
control things like that.
A.
On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
lewis.mcgibbney@gmail.com> wrote:
> Hi builds@,
> The named library is Boost http://www.boost.org/
> Is this library installed on any build slave?
>
> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>
> > Thanks very much! Some of our tests are now passing (17/39), but now I
> see
> > that it is unable to locate boost:
> >
> > [exec] Unable to find the requested Boost libraries.
> > [exec]
> > [exec] Boost version: 1.54.0
> > [exec]
> > [exec] Boost include path: /usr/include
> > [exec]
> > [exec] Could not find the following Boost libraries:
> > [exec]
> > [exec] boost_system
> > [exec] boost_thread
> > [exec]
> > [exec] Some (but not all) of the required Boost libraries were
> > found. You may
> > [exec] need to install these additional Boost libraries.
> > Alternatively, set
> > [exec] BOOST_LIBRARYDIR to the directory containing Boost
> libraries
> > or BOOST_ROOT
> > [exec] to the location of Boost.
> >
> > Can you suggest what we can do to address this?
> >
> >
> > > On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
> > >
> > > The node, ubuntu3, that this job ran on runs 12.04 for compatibility
> > > reasons and as such has an old version of cmake. I've gone ahead and
> > > modified your job from the label "solaris||ubuntu" to
> > > "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
> > >
> > > Cheers,
> > > -Pono
> > >
> > > On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> > > chris.a.mattmann@jpl.nasa.gov> wrote:
> > >
> > >> Send mail to builds@apache.org, I’ve CC’ed them on this message.
> > >>
> > >> builds@, please help :)
> > >>
> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >> Chris Mattmann, Ph.D.
> > >> Chief Architect
> > >> Instrument Software and Science Data Systems Section (398)
> > >> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> > >> Office: 168-519, Mailstop: 168-527
> > >> Email: chris.a.mattmann@nasa.gov
> > >> WWW: http://sunset.usc.edu/~mattmann/
> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >> Director, Information Retrieval and Data Science Group (IRDS)
> > >> Adjunct Associate Professor, Computer Science Department
> > >> University of Southern California, Los Angeles, CA 90089 USA
> > >> WWW: http://irds.usc.edu/
> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> -----Original Message-----
> > >> From: Matt Post <po...@cs.jhu.edu>
> > >> Reply-To: "dev@joshua.incubator.apache.org"
> > >> <de...@joshua.incubator.apache.org>
> > >> Date: Thursday, March 31, 2016 at 4:59 PM
> > >> To: "dev@joshua.incubator.apache.org" <
> dev@joshua.incubator.apache.org>
> > >> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> > >> Subject: Re: Build failed in Jenkins: joshua_master #4
> > >>
> > >>> (To be clear, I'm asking if anyone knows how we can get a newer
> version
> > >>> of cmake installed on build.apache.org...)
> > >>>
> > >>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> > >>>>
> > >>>> It looks like the first failure is at KenLM. I see:
> > >>>>
> > >>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> > >>>> [exec] CMake 2.8.8 or higher is required. You are
> running
> > >>>> version 2.8.7
> > >>>>
> > >>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
> > >>>
> > >>
> > >>
> >
> >
>
>
> --
> *Lewis*
>
Re: Build failed in Jenkins: joshua_master #4
Posted by Andrew Bayer <an...@gmail.com>.
Should be on any of the ubuntu-[1,2,4,5,6] boxes or H10 and H11. Otherwise,
probably not. As always, if you need system libraries installed, we
strongly advise you run your build in a docker container, where you can
control things like that.
A.
On Fri, Apr 1, 2016 at 9:18 AM, Lewis John Mcgibbney <
lewis.mcgibbney@gmail.com> wrote:
> Hi builds@,
> The named library is Boost http://www.boost.org/
> Is this library installed on any build slave?
>
> On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
>
> > Thanks very much! Some of our tests are now passing (17/39), but now I
> see
> > that it is unable to locate boost:
> >
> > [exec] Unable to find the requested Boost libraries.
> > [exec]
> > [exec] Boost version: 1.54.0
> > [exec]
> > [exec] Boost include path: /usr/include
> > [exec]
> > [exec] Could not find the following Boost libraries:
> > [exec]
> > [exec] boost_system
> > [exec] boost_thread
> > [exec]
> > [exec] Some (but not all) of the required Boost libraries were
> > found. You may
> > [exec] need to install these additional Boost libraries.
> > Alternatively, set
> > [exec] BOOST_LIBRARYDIR to the directory containing Boost
> libraries
> > or BOOST_ROOT
> > [exec] to the location of Boost.
> >
> > Can you suggest what we can do to address this?
> >
> >
> > > On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
> > >
> > > The node, ubuntu3, that this job ran on runs 12.04 for compatibility
> > > reasons and as such has an old version of cmake. I've gone ahead and
> > > modified your job from the label "solaris||ubuntu" to
> > > "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
> > >
> > > Cheers,
> > > -Pono
> > >
> > > On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> > > chris.a.mattmann@jpl.nasa.gov> wrote:
> > >
> > >> Send mail to builds@apache.org, I’ve CC’ed them on this message.
> > >>
> > >> builds@, please help :)
> > >>
> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >> Chris Mattmann, Ph.D.
> > >> Chief Architect
> > >> Instrument Software and Science Data Systems Section (398)
> > >> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> > >> Office: 168-519, Mailstop: 168-527
> > >> Email: chris.a.mattmann@nasa.gov
> > >> WWW: http://sunset.usc.edu/~mattmann/
> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >> Director, Information Retrieval and Data Science Group (IRDS)
> > >> Adjunct Associate Professor, Computer Science Department
> > >> University of Southern California, Los Angeles, CA 90089 USA
> > >> WWW: http://irds.usc.edu/
> > >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> -----Original Message-----
> > >> From: Matt Post <po...@cs.jhu.edu>
> > >> Reply-To: "dev@joshua.incubator.apache.org"
> > >> <de...@joshua.incubator.apache.org>
> > >> Date: Thursday, March 31, 2016 at 4:59 PM
> > >> To: "dev@joshua.incubator.apache.org" <
> dev@joshua.incubator.apache.org>
> > >> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> > >> Subject: Re: Build failed in Jenkins: joshua_master #4
> > >>
> > >>> (To be clear, I'm asking if anyone knows how we can get a newer
> version
> > >>> of cmake installed on build.apache.org...)
> > >>>
> > >>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> > >>>>
> > >>>> It looks like the first failure is at KenLM. I see:
> > >>>>
> > >>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> > >>>> [exec] CMake 2.8.8 or higher is required. You are
> running
> > >>>> version 2.8.7
> > >>>>
> > >>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
> > >>>
> > >>
> > >>
> >
> >
>
>
> --
> *Lewis*
>
Re: Build failed in Jenkins: joshua_master #4
Posted by Lewis John Mcgibbney <le...@gmail.com>.
Hi builds@,
The named library is Boost http://www.boost.org/
Is this library installed on any build slave?
On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
> Thanks very much! Some of our tests are now passing (17/39), but now I see
> that it is unable to locate boost:
>
> [exec] Unable to find the requested Boost libraries.
> [exec]
> [exec] Boost version: 1.54.0
> [exec]
> [exec] Boost include path: /usr/include
> [exec]
> [exec] Could not find the following Boost libraries:
> [exec]
> [exec] boost_system
> [exec] boost_thread
> [exec]
> [exec] Some (but not all) of the required Boost libraries were
> found. You may
> [exec] need to install these additional Boost libraries.
> Alternatively, set
> [exec] BOOST_LIBRARYDIR to the directory containing Boost libraries
> or BOOST_ROOT
> [exec] to the location of Boost.
>
> Can you suggest what we can do to address this?
>
>
> > On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
> >
> > The node, ubuntu3, that this job ran on runs 12.04 for compatibility
> > reasons and as such has an old version of cmake. I've gone ahead and
> > modified your job from the label "solaris||ubuntu" to
> > "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
> >
> > Cheers,
> > -Pono
> >
> > On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> > chris.a.mattmann@jpl.nasa.gov> wrote:
> >
> >> Send mail to builds@apache.org, I’ve CC’ed them on this message.
> >>
> >> builds@, please help :)
> >>
> >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> Chris Mattmann, Ph.D.
> >> Chief Architect
> >> Instrument Software and Science Data Systems Section (398)
> >> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >> Office: 168-519, Mailstop: 168-527
> >> Email: chris.a.mattmann@nasa.gov
> >> WWW: http://sunset.usc.edu/~mattmann/
> >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> Director, Information Retrieval and Data Science Group (IRDS)
> >> Adjunct Associate Professor, Computer Science Department
> >> University of Southern California, Los Angeles, CA 90089 USA
> >> WWW: http://irds.usc.edu/
> >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>
> >>
> >>
> >>
> >>
> >> -----Original Message-----
> >> From: Matt Post <po...@cs.jhu.edu>
> >> Reply-To: "dev@joshua.incubator.apache.org"
> >> <de...@joshua.incubator.apache.org>
> >> Date: Thursday, March 31, 2016 at 4:59 PM
> >> To: "dev@joshua.incubator.apache.org" <de...@joshua.incubator.apache.org>
> >> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> >> Subject: Re: Build failed in Jenkins: joshua_master #4
> >>
> >>> (To be clear, I'm asking if anyone knows how we can get a newer version
> >>> of cmake installed on build.apache.org...)
> >>>
> >>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> >>>>
> >>>> It looks like the first failure is at KenLM. I see:
> >>>>
> >>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> >>>> [exec] CMake 2.8.8 or higher is required. You are running
> >>>> version 2.8.7
> >>>>
> >>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
> >>>
> >>
> >>
>
>
--
*Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Lewis John Mcgibbney <le...@gmail.com>.
Hi builds@,
The named library is Boost http://www.boost.org/
Is this library installed on any build slave?
On Fri, Apr 1, 2016 at 7:29 AM, Matt Post <po...@cs.jhu.edu> wrote:
> Thanks very much! Some of our tests are now passing (17/39), but now I see
> that it is unable to locate boost:
>
> [exec] Unable to find the requested Boost libraries.
> [exec]
> [exec] Boost version: 1.54.0
> [exec]
> [exec] Boost include path: /usr/include
> [exec]
> [exec] Could not find the following Boost libraries:
> [exec]
> [exec] boost_system
> [exec] boost_thread
> [exec]
> [exec] Some (but not all) of the required Boost libraries were
> found. You may
> [exec] need to install these additional Boost libraries.
> Alternatively, set
> [exec] BOOST_LIBRARYDIR to the directory containing Boost libraries
> or BOOST_ROOT
> [exec] to the location of Boost.
>
> Can you suggest what we can do to address this?
>
>
> > On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
> >
> > The node, ubuntu3, that this job ran on runs 12.04 for compatibility
> > reasons and as such has an old version of cmake. I've gone ahead and
> > modified your job from the label "solaris||ubuntu" to
> > "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
> >
> > Cheers,
> > -Pono
> >
> > On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> > chris.a.mattmann@jpl.nasa.gov> wrote:
> >
> >> Send mail to builds@apache.org, I’ve CC’ed them on this message.
> >>
> >> builds@, please help :)
> >>
> >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> Chris Mattmann, Ph.D.
> >> Chief Architect
> >> Instrument Software and Science Data Systems Section (398)
> >> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >> Office: 168-519, Mailstop: 168-527
> >> Email: chris.a.mattmann@nasa.gov
> >> WWW: http://sunset.usc.edu/~mattmann/
> >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> Director, Information Retrieval and Data Science Group (IRDS)
> >> Adjunct Associate Professor, Computer Science Department
> >> University of Southern California, Los Angeles, CA 90089 USA
> >> WWW: http://irds.usc.edu/
> >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>
> >>
> >>
> >>
> >>
> >> -----Original Message-----
> >> From: Matt Post <po...@cs.jhu.edu>
> >> Reply-To: "dev@joshua.incubator.apache.org"
> >> <de...@joshua.incubator.apache.org>
> >> Date: Thursday, March 31, 2016 at 4:59 PM
> >> To: "dev@joshua.incubator.apache.org" <de...@joshua.incubator.apache.org>
> >> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> >> Subject: Re: Build failed in Jenkins: joshua_master #4
> >>
> >>> (To be clear, I'm asking if anyone knows how we can get a newer version
> >>> of cmake installed on build.apache.org...)
> >>>
> >>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> >>>>
> >>>> It looks like the first failure is at KenLM. I see:
> >>>>
> >>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> >>>> [exec] CMake 2.8.8 or higher is required. You are running
> >>>> version 2.8.7
> >>>>
> >>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
> >>>
> >>
> >>
>
>
--
*Lewis*
Re: Build failed in Jenkins: joshua_master #4
Posted by Matt Post <po...@cs.jhu.edu>.
Thanks very much! Some of our tests are now passing (17/39), but now I see that it is unable to locate boost:
[exec] Unable to find the requested Boost libraries.
[exec]
[exec] Boost version: 1.54.0
[exec]
[exec] Boost include path: /usr/include
[exec]
[exec] Could not find the following Boost libraries:
[exec]
[exec] boost_system
[exec] boost_thread
[exec]
[exec] Some (but not all) of the required Boost libraries were found. You may
[exec] need to install these additional Boost libraries. Alternatively, set
[exec] BOOST_LIBRARYDIR to the directory containing Boost libraries or BOOST_ROOT
[exec] to the location of Boost.
Can you suggest what we can do to address this?
> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
>
> The node, ubuntu3, that this job ran on runs 12.04 for compatibility
> reasons and as such has an old version of cmake. I've gone ahead and
> modified your job from the label "solaris||ubuntu" to
> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>
> Cheers,
> -Pono
>
> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> chris.a.mattmann@jpl.nasa.gov> wrote:
>
>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>>
>> builds@, please help :)
>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> Chris Mattmann, Ph.D.
>> Chief Architect
>> Instrument Software and Science Data Systems Section (398)
>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> Office: 168-519, Mailstop: 168-527
>> Email: chris.a.mattmann@nasa.gov
>> WWW: http://sunset.usc.edu/~mattmann/
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> Director, Information Retrieval and Data Science Group (IRDS)
>> Adjunct Associate Professor, Computer Science Department
>> University of Southern California, Los Angeles, CA 90089 USA
>> WWW: http://irds.usc.edu/
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: Matt Post <po...@cs.jhu.edu>
>> Reply-To: "dev@joshua.incubator.apache.org"
>> <de...@joshua.incubator.apache.org>
>> Date: Thursday, March 31, 2016 at 4:59 PM
>> To: "dev@joshua.incubator.apache.org" <de...@joshua.incubator.apache.org>
>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>> Subject: Re: Build failed in Jenkins: joshua_master #4
>>
>>> (To be clear, I'm asking if anyone knows how we can get a newer version
>>> of cmake installed on build.apache.org...)
>>>
>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>
>>>> It looks like the first failure is at KenLM. I see:
>>>>
>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>>>> [exec] CMake 2.8.8 or higher is required. You are running
>>>> version 2.8.7
>>>>
>>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>>>
>>
>>
Re: Build failed in Jenkins: joshua_master #4
Posted by Matt Post <po...@cs.jhu.edu>.
Thanks very much! Some of our tests are now passing (17/39), but now I see that it is unable to locate boost:
[exec] Unable to find the requested Boost libraries.
[exec]
[exec] Boost version: 1.54.0
[exec]
[exec] Boost include path: /usr/include
[exec]
[exec] Could not find the following Boost libraries:
[exec]
[exec] boost_system
[exec] boost_thread
[exec]
[exec] Some (but not all) of the required Boost libraries were found. You may
[exec] need to install these additional Boost libraries. Alternatively, set
[exec] BOOST_LIBRARYDIR to the directory containing Boost libraries or BOOST_ROOT
[exec] to the location of Boost.
Can you suggest what we can do to address this?
> On Apr 1, 2016, at 12:18 AM, Daniel Takamori <po...@apache.org> wrote:
>
> The node, ubuntu3, that this job ran on runs 12.04 for compatibility
> reasons and as such has an old version of cmake. I've gone ahead and
> modified your job from the label "solaris||ubuntu" to
> "solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
>
> Cheers,
> -Pono
>
> On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
> chris.a.mattmann@jpl.nasa.gov> wrote:
>
>> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>>
>> builds@, please help :)
>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> Chris Mattmann, Ph.D.
>> Chief Architect
>> Instrument Software and Science Data Systems Section (398)
>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> Office: 168-519, Mailstop: 168-527
>> Email: chris.a.mattmann@nasa.gov
>> WWW: http://sunset.usc.edu/~mattmann/
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> Director, Information Retrieval and Data Science Group (IRDS)
>> Adjunct Associate Professor, Computer Science Department
>> University of Southern California, Los Angeles, CA 90089 USA
>> WWW: http://irds.usc.edu/
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: Matt Post <po...@cs.jhu.edu>
>> Reply-To: "dev@joshua.incubator.apache.org"
>> <de...@joshua.incubator.apache.org>
>> Date: Thursday, March 31, 2016 at 4:59 PM
>> To: "dev@joshua.incubator.apache.org" <de...@joshua.incubator.apache.org>
>> Cc: "post@jgeppert.com" <po...@jgeppert.com>
>> Subject: Re: Build failed in Jenkins: joshua_master #4
>>
>>> (To be clear, I'm asking if anyone knows how we can get a newer version
>>> of cmake installed on build.apache.org...)
>>>
>>>> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
>>>>
>>>> It looks like the first failure is at KenLM. I see:
>>>>
>>>> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
>>>> [exec] CMake 2.8.8 or higher is required. You are running
>>>> version 2.8.7
>>>>
>>>> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
>>>
>>
>>
Re: Build failed in Jenkins: joshua_master #4
Posted by Daniel Takamori <po...@apache.org>.
The node, ubuntu3, that this job ran on runs 12.04 for compatibility
reasons and as such has an old version of cmake. I've gone ahead and
modified your job from the label "solaris||ubuntu" to
"solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
Cheers,
-Pono
On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
chris.a.mattmann@jpl.nasa.gov> wrote:
> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>
> builds@, please help :)
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Chris Mattmann, Ph.D.
> Chief Architect
> Instrument Software and Science Data Systems Section (398)
> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> Office: 168-519, Mailstop: 168-527
> Email: chris.a.mattmann@nasa.gov
> WWW: http://sunset.usc.edu/~mattmann/
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Director, Information Retrieval and Data Science Group (IRDS)
> Adjunct Associate Professor, Computer Science Department
> University of Southern California, Los Angeles, CA 90089 USA
> WWW: http://irds.usc.edu/
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
>
>
>
> -----Original Message-----
> From: Matt Post <po...@cs.jhu.edu>
> Reply-To: "dev@joshua.incubator.apache.org"
> <de...@joshua.incubator.apache.org>
> Date: Thursday, March 31, 2016 at 4:59 PM
> To: "dev@joshua.incubator.apache.org" <de...@joshua.incubator.apache.org>
> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> Subject: Re: Build failed in Jenkins: joshua_master #4
>
> >(To be clear, I'm asking if anyone knows how we can get a newer version
> >of cmake installed on build.apache.org...)
> >
> >> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> >>
> >> It looks like the first failure is at KenLM. I see:
> >>
> >> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> >> [exec] CMake 2.8.8 or higher is required. You are running
> >>version 2.8.7
> >>
> >> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
> >
>
>
Re: Build failed in Jenkins: joshua_master #4
Posted by Daniel Takamori <po...@apache.org>.
The node, ubuntu3, that this job ran on runs 12.04 for compatibility
reasons and as such has an old version of cmake. I've gone ahead and
modified your job from the label "solaris||ubuntu" to
"solaris||ubuntu&&!(ubuntu3)" to restrict to the newer 14.04 nodes.
Cheers,
-Pono
On Fri, Apr 1, 2016 at 4:10 AM, Mattmann, Chris A (3980) <
chris.a.mattmann@jpl.nasa.gov> wrote:
> Send mail to builds@apache.org, I’ve CC’ed them on this message.
>
> builds@, please help :)
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Chris Mattmann, Ph.D.
> Chief Architect
> Instrument Software and Science Data Systems Section (398)
> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> Office: 168-519, Mailstop: 168-527
> Email: chris.a.mattmann@nasa.gov
> WWW: http://sunset.usc.edu/~mattmann/
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Director, Information Retrieval and Data Science Group (IRDS)
> Adjunct Associate Professor, Computer Science Department
> University of Southern California, Los Angeles, CA 90089 USA
> WWW: http://irds.usc.edu/
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
>
>
>
> -----Original Message-----
> From: Matt Post <po...@cs.jhu.edu>
> Reply-To: "dev@joshua.incubator.apache.org"
> <de...@joshua.incubator.apache.org>
> Date: Thursday, March 31, 2016 at 4:59 PM
> To: "dev@joshua.incubator.apache.org" <de...@joshua.incubator.apache.org>
> Cc: "post@jgeppert.com" <po...@jgeppert.com>
> Subject: Re: Build failed in Jenkins: joshua_master #4
>
> >(To be clear, I'm asking if anyone knows how we can get a newer version
> >of cmake installed on build.apache.org...)
> >
> >> On Mar 31, 2016, at 7:50 PM, Matt Post <po...@cs.jhu.edu> wrote:
> >>
> >> It looks like the first failure is at KenLM. I see:
> >>
> >> CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
> >> [exec] CMake 2.8.8 or higher is required. You are running
> >>version 2.8.7
> >>
> >> Is there any way that this can be fixed? CMake on my Mac is 3.4.3.
> >
>
>