You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@httpd.apache.org by Cartoon Factory <ga...@cartoon-factory.com> on 2002/08/02 19:33:12 UTC
Server going Wild
Hi:
I am running Apache 1.3.26 on FreeBSD 4.6
I have an occasional problem with processes running wild... it just starts
snowballing, gobbling up memory are resources, and slowing things way down.
I am trying to track down the cause of this, but thus far, I have had no
luck. I have added PID to the access logs, and when this runs wild, I search
for that PID, but I have not yet been able to catch what is causing this.
So, in the meantime, I want to see if I can configure Apache to close down
the wild processes. I have noticed that when it get's going, the Priority
shoots way up to 60+. Is there a way (or, better, WHAT is the way) I can
have apache shut down a process that has a priority over 60? Is this wise?
I have tried RLimitMEM (RLimitMEM 40000 50000), but that does not allow some
cgi scripts to run... should I use that instead, and set the limits higher
(and how high?).
Any other suggestions so I do not have to stay glued to TOP?
I am a real newbie, (sorry) so please be a bit verbose in your response, so
I can understand!
Thank You!
-------------------
Dave Koch
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
RE: Server going Wild
Posted by Cartoon Factory <ga...@cartoon-factory.com>.
Michele:
Ran it.... command not found (on FreeBSD)
Thank You!
-------------------
Dave Koch
-----Original Message-----
From: Michele Petrovsky [mailto:tpark@voicenet.com]
Sent: Friday, August 02, 2002 1:43 PM
To: users@httpd.apache.org
Cc: Tom Parkinson; ThakeB01@gmc.edu; shinton.d@gmc.edu; rocque.m@gmc.edu
Subject: Re: Server going Wild
Dave, you might also want to look into the command rtsched. Don't know if
it's available under any OS other than HP-UX, but it does allow on-the-fly
changes of process priority *without* having to bother with nicing.
>
> Here is one starting (from top):
>
> PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
> 82353 nobody 55 0 37060K 25424K RUN 0:08 44.99% 30.76% httpd
> 81539 nobody 2 0 20852K 18060K sbwait 0:02 0.93% 0.93% httpd
> 82352 nobody 2 0 19992K 17308K sbwait 0:00 1.29% 0.88% httpd
> 82087 nobody 2 0 24308K 21676K sbwait 1:40 0.29% 0.29% httpd
> 81471 nobody 2 0 19992K 17448K accept 0:02 0.24% 0.24% httpd
> 82307 nobody 2 0 19992K 17296K accept 0:00 0.25% 0.24% httpd
> 81466 nobody 2 0 20416K 17900K sbwait 0:02 0.15% 0.15% httpd
> 81542 nobody 2 0 20420K 18000K sbwait 0:02 0.05% 0.05% httpd
> 109 root 2 0 6344K 2092K select 3:24 0.00% 0.00% perl
> 5914 root 2 0 1792K 516K select 1:11 0.00% 0.00% sendmail
> 82 root 10 0 992K 232K nanslp 0:11 0.00% 0.00% cron
> 79875 root 28 0 1992K 1020K RUN 0:06 0.00% 0.00% top
> 89 root 2 0 916K 108K select 0:05 0.00% 0.00% usbd
> 81467 nobody 2 0 21776K 19184K sbwait 0:05 0.00% 0.00% httpd
> 74400 root 2 0 2476K 984K select 0:04 0.00% 0.00% sshd
> 81472 nobody 2 0 21316K 18708K sbwait 0:03 0.00% 0.00% httpd
>
> Thank You!
> -------------------
>
> Dave Koch
>
> -----Original Message-----
> From: Michele Petrovsky [mailto:tpark@voicenet.com]
> Sent: Friday, August 02, 2002 12:41 PM
> To: users@httpd.apache.org
> Cc: rocque.m@gmc.edu; Tom Parkinson
> Subject: Re: Server going Wild
>
>
> If I'm not mistaken, the higher the integer value of a Unix/Linux
process's
> "nice number", the *lower* it is in the pecking order. So, if your Apache
> is running with as high a "nice number" as 60 ("nice number" is
Unix-speak
> for the number used to compute actual process priority :o), it's grabbing
> way too little, rather than too much, CPU time. But if "ps -l" (process
> status, long version) reports Apache with a "PRI" value of 60, rather than
a
> "NICE" value of 60, then you're correct that Apache is gobbling up your
> system's resources.
>
> Have you tried back-tracking, so to speak? Apache, I believe, ordinarily
> runs as a single parent process that automatically spawns (generates)
> several child processes. (I believe the number of children is equal to
the
> value you've defined for the MaxClients parameter.) Anyway, if there are
> child processes hung up or that won't shut themselves down gracefully, the
> parent process might not be able to generate new children. So, when
you're
> eyeballing PIDs, it might help to trace them back to their respective
PPIDs
> (parent process IDs), if any. In any case, you might be able to use the
> command "nice" to correct the 60+ priority value. If "ps -el" reports
> something like " ... PRI 60 NICE 30", syntax something like "nice +20
> httpd" should result in ps giving you more reasonable output, such as "
..
> PRI 80 NICE 50". (I'm pulling these values off the top of my head, but
I
> think you get the idea.)
>
> Re: memory limits, I would tend to think that it's processor time that's
> your problem. Another command you might want to try, though, in order to
> determine the relative weight of both memory and CPU time in your
situation,
> is "top". It'll give you a real-time picture. It reports on parameters
> such as CPU load overall, how much of that is user and how much is system,
a
> breakdown of memory usage by command - lots of good info.
>
> Hope this helps.
>
> Michele
> ----- Original Message -----
> >From: "Cartoon Factory" <ga...@cartoon-factory.com>
> To: <us...@httpd.apache.org>
> Sent: Friday, August 02, 2002 1:33 PM
> Subject: Server going Wild
>
>
> > Hi:
> >
> > I am running Apache 1.3.26 on FreeBSD 4.6
> >
> > I have an occasional problem with processes running wild... it just
starts
> > snowballing, gobbling up memory are resources, and slowing things way
> down.
> >
> > I am trying to track down the cause of this, but thus far, I have had no
> > luck. I have added PID to the access logs, and when this runs wild, I
> search
> > for that PID, but I have not yet been able to catch what is causing
this.
> >
> > So, in the meantime, I want to see if I can configure Apache to close
down
> > the wild processes. I have noticed that when it get's going, the
Priority
> > shoots way up to 60+. Is there a way (or, better, WHAT is the way) I can
> > have apache shut down a process that has a priority over 60? Is this
wise?
> >
> > I have tried RLimitMEM (RLimitMEM 40000 50000), but that does not allow
> some
> > cgi scripts to run... should I use that instead, and set the limits
higher
> > (and how high?).
> >
> > Any other suggestions so I do not have to stay glued to TOP?
> >
> > I am a real newbie, (sorry) so please be a bit verbose in your response,
> so
> > I can understand!
> >
> > Thank You!
> > -------------------
> >
> > Dave Koch
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: Server going Wild
Posted by Michele Petrovsky <tp...@voicenet.com>.
Dave, you might also want to look into the command rtsched. Don't know if
it's available under any OS other than HP-UX, but it does allow on-the-fly
changes of process priority *without* having to bother with nicing.
>
> Here is one starting (from top):
>
> PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
> 82353 nobody 55 0 37060K 25424K RUN 0:08 44.99% 30.76% httpd
> 81539 nobody 2 0 20852K 18060K sbwait 0:02 0.93% 0.93% httpd
> 82352 nobody 2 0 19992K 17308K sbwait 0:00 1.29% 0.88% httpd
> 82087 nobody 2 0 24308K 21676K sbwait 1:40 0.29% 0.29% httpd
> 81471 nobody 2 0 19992K 17448K accept 0:02 0.24% 0.24% httpd
> 82307 nobody 2 0 19992K 17296K accept 0:00 0.25% 0.24% httpd
> 81466 nobody 2 0 20416K 17900K sbwait 0:02 0.15% 0.15% httpd
> 81542 nobody 2 0 20420K 18000K sbwait 0:02 0.05% 0.05% httpd
> 109 root 2 0 6344K 2092K select 3:24 0.00% 0.00% perl
> 5914 root 2 0 1792K 516K select 1:11 0.00% 0.00% sendmail
> 82 root 10 0 992K 232K nanslp 0:11 0.00% 0.00% cron
> 79875 root 28 0 1992K 1020K RUN 0:06 0.00% 0.00% top
> 89 root 2 0 916K 108K select 0:05 0.00% 0.00% usbd
> 81467 nobody 2 0 21776K 19184K sbwait 0:05 0.00% 0.00% httpd
> 74400 root 2 0 2476K 984K select 0:04 0.00% 0.00% sshd
> 81472 nobody 2 0 21316K 18708K sbwait 0:03 0.00% 0.00% httpd
>
> Thank You!
> -------------------
>
> Dave Koch
>
> -----Original Message-----
> From: Michele Petrovsky [mailto:tpark@voicenet.com]
> Sent: Friday, August 02, 2002 12:41 PM
> To: users@httpd.apache.org
> Cc: rocque.m@gmc.edu; Tom Parkinson
> Subject: Re: Server going Wild
>
>
> If I'm not mistaken, the higher the integer value of a Unix/Linux
process's
> "nice number", the *lower* it is in the pecking order. So, if your Apache
> is running with as high a "nice number" as 60 ("nice number" is
Unix-speak
> for the number used to compute actual process priority :o), it's grabbing
> way too little, rather than too much, CPU time. But if "ps -l" (process
> status, long version) reports Apache with a "PRI" value of 60, rather than
a
> "NICE" value of 60, then you're correct that Apache is gobbling up your
> system's resources.
>
> Have you tried back-tracking, so to speak? Apache, I believe, ordinarily
> runs as a single parent process that automatically spawns (generates)
> several child processes. (I believe the number of children is equal to
the
> value you've defined for the MaxClients parameter.) Anyway, if there are
> child processes hung up or that won't shut themselves down gracefully, the
> parent process might not be able to generate new children. So, when
you're
> eyeballing PIDs, it might help to trace them back to their respective
PPIDs
> (parent process IDs), if any. In any case, you might be able to use the
> command "nice" to correct the 60+ priority value. If "ps -el" reports
> something like " ... PRI 60 NICE 30", syntax something like "nice +20
> httpd" should result in ps giving you more reasonable output, such as "
...
> PRI 80 NICE 50". (I'm pulling these values off the top of my head, but
I
> think you get the idea.)
>
> Re: memory limits, I would tend to think that it's processor time that's
> your problem. Another command you might want to try, though, in order to
> determine the relative weight of both memory and CPU time in your
situation,
> is "top". It'll give you a real-time picture. It reports on parameters
> such as CPU load overall, how much of that is user and how much is system,
a
> breakdown of memory usage by command - lots of good info.
>
> Hope this helps.
>
> Michele
> ----- Original Message -----
> >From: "Cartoon Factory" <ga...@cartoon-factory.com>
> To: <us...@httpd.apache.org>
> Sent: Friday, August 02, 2002 1:33 PM
> Subject: Server going Wild
>
>
> > Hi:
> >
> > I am running Apache 1.3.26 on FreeBSD 4.6
> >
> > I have an occasional problem with processes running wild... it just
starts
> > snowballing, gobbling up memory are resources, and slowing things way
> down.
> >
> > I am trying to track down the cause of this, but thus far, I have had no
> > luck. I have added PID to the access logs, and when this runs wild, I
> search
> > for that PID, but I have not yet been able to catch what is causing
this.
> >
> > So, in the meantime, I want to see if I can configure Apache to close
down
> > the wild processes. I have noticed that when it get's going, the
Priority
> > shoots way up to 60+. Is there a way (or, better, WHAT is the way) I can
> > have apache shut down a process that has a priority over 60? Is this
wise?
> >
> > I have tried RLimitMEM (RLimitMEM 40000 50000), but that does not allow
> some
> > cgi scripts to run... should I use that instead, and set the limits
higher
> > (and how high?).
> >
> > Any other suggestions so I do not have to stay glued to TOP?
> >
> > I am a real newbie, (sorry) so please be a bit verbose in your response,
> so
> > I can understand!
> >
> > Thank You!
> > -------------------
> >
> > Dave Koch
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: Server going Wild
Posted by Lewis Watson <li...@visionsix.com>.
I noticed :) there seems to be some type of video like "girls gone wild" floating around on kazaa, you may want to do a search for kazaa light, unless you like the popup ads that kazaa brings....
Lewis
----- Original Message -----
From: Ron Wingfield
To: users@httpd.apache.org
Sent: Friday, August 02, 2002 3:07 PM
Subject: Re: Server going Wild
With apologies to the list, but I gotta' ask:
Regarding this thread topic,
will there ever be a video available like that late night TV "Girls Gone Wild" thing?
Re: Server going Wild
Posted by Ron Wingfield <rt...@archaxis.net>.
With apologies to the list, but I gotta' ask:
Regarding this thread topic,
will there ever be a video available like that late night TV "Girls Gone Wild" thing?
Re: Server going Wild
Posted by Michele Petrovsky <tp...@voicenet.com>.
You're welcome, Dave; let me/the group know how you make out.
(Re: recompiling the kernel, first time I did it I was mucho afraid; after
that, almost blasé. But it's really great for "geek points" ... :o)
----- Original Message -----
From: "Cartoon Factory" <ga...@cartoon-factory.com>
To: <us...@httpd.apache.org>
Sent: Friday, August 02, 2002 3:42 PM
Subject: RE: Server going Wild
> Michele:
>
> Thanks for your insight! I am not afraid of recompiling if I have to. For
> the most part, when I put it all together, I did not do much special. I
for
> sure do not remember anything to do with nice levels, or monk eying with
> that (to be honest, I would not know how.)
>
> I personally think I have a CGI script (run from a web page) that is
running
> wild, that does not terminate, and just goes crazy.
>
> I THINK I might have found the root cause, things have been stable for a
> while. I hope I caught it....
>
> Thank You!
> -------------------
>
> Dave Koch
>
> -----Original Message-----
> From: Michele Petrovsky [mailto:tpark@voicenet.com]
> Sent: Friday, August 02, 2002 1:38 PM
> To: users@httpd.apache.org
> Cc: shinton.d@gmc.edu; rocque.m@gmc.edu; Tom Parkinson
> Subject: Re: Server going Wild
>
>
> Dave, it definitely looks like something in how Apache is configured is
> causing the children to go loco. Output sample very helpful. Given those
> numbers, for some reason when the parent httpd (which itself seems to me
to
> have a rather high priority) spawns its kids, it gives them nice and PRI
> numbers way out of keeping with its own.
>
> I'm not knowledgeable enough about Apache to know which (if any) of its
> config params would control something like this. Quick fix probably would
> be to "nice" the parent up/down to NICE/PRI numbers that are more
reasonable
> (maybe 180 PRI?) Then, even if the parent spawns children with even more
> clout than it has, the numbers for those children should still be fairly
> reasonable. For instance, applying the ratio demonstrated in your sample
> output, "nicing" the parent httpd down to a 180 PRI should, hopefully,
bring
> the children down to, maybe, an 80 or 90 in that department.
>
> I noticed too that not only all your httpds but all your other processes
> have a nice number of 0, which I've *never* seen. All the Unix (H-P
mostly)
> and Linux (Red Hat mostly) boxes I've dealt with have nice set largely or
> exclusively to 20, with the occasional but fairly rare 10. Could it be
that
> in compiling your kernel the default nice number was set too low? If
that's
> the case, you may need to reconfigure/recompile.
>
> But hang on; further investigation in progress ... :o)
>
> ----- Original Message -----
> >From: "Cartoon Factory" <ga...@cartoon-factory.com>
> To: <us...@httpd.apache.org>
> Sent: Friday, August 02, 2002 2:58 PM
> Subject: RE: Server going Wild
>
>
> > Michelle:
> >
> > Thanks for the help. I guess I did not explain too well. I am watching
> > top... and all of a sudden a process will just take off. Typically, the
> > httpd PRI number in TOP is 2... but the runaway will shoot way up to 64.
> My
> > typical size is 20000K- these will shoot up to the 150M range and WCPU
and
> > CPU will go from 2-5 % to 80%.
> >
> > So I sit here all day and watch TOP and kill those bad processes. I wish
I
> > COULD figure out what causes them! In the meantime, I wanted to figure
out
> > how I could get apache to say, "Wow, this one is way out of normal
> > parameters..." and kill it itself.
> >
> > I also noticed when the runaway starts, and I kill it, I usually have
> about
> > 5-10 other processes to kill.... I take one down, another springs up
like
> a
> > hydra!
> >
> > Here is one starting (from top):
> >
> > PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
> > 82353 nobody 55 0 37060K 25424K RUN 0:08 44.99% 30.76% httpd
> > 81539 nobody 2 0 20852K 18060K sbwait 0:02 0.93% 0.93% httpd
> > 82352 nobody 2 0 19992K 17308K sbwait 0:00 1.29% 0.88% httpd
> > 82087 nobody 2 0 24308K 21676K sbwait 1:40 0.29% 0.29% httpd
> > 81471 nobody 2 0 19992K 17448K accept 0:02 0.24% 0.24% httpd
> > 82307 nobody 2 0 19992K 17296K accept 0:00 0.25% 0.24% httpd
> > 81466 nobody 2 0 20416K 17900K sbwait 0:02 0.15% 0.15% httpd
> > 81542 nobody 2 0 20420K 18000K sbwait 0:02 0.05% 0.05% httpd
> > 109 root 2 0 6344K 2092K select 3:24 0.00% 0.00% perl
> > 5914 root 2 0 1792K 516K select 1:11 0.00% 0.00%
sendmail
> > 82 root 10 0 992K 232K nanslp 0:11 0.00% 0.00% cron
> > 79875 root 28 0 1992K 1020K RUN 0:06 0.00% 0.00% top
> > 89 root 2 0 916K 108K select 0:05 0.00% 0.00% usbd
> > 81467 nobody 2 0 21776K 19184K sbwait 0:05 0.00% 0.00% httpd
> > 74400 root 2 0 2476K 984K select 0:04 0.00% 0.00% sshd
> > 81472 nobody 2 0 21316K 18708K sbwait 0:03 0.00% 0.00% httpd
> >
> > Thank You!
> > -------------------
> >
> > Dave Koch
> >
> > -----Original Message-----
> > From: Michele Petrovsky [mailto:tpark@voicenet.com]
> > Sent: Friday, August 02, 2002 12:41 PM
> > To: users@httpd.apache.org
> > Cc: rocque.m@gmc.edu; Tom Parkinson
> > Subject: Re: Server going Wild
> >
> >
> > If I'm not mistaken, the higher the integer value of a Unix/Linux
> process's
> > "nice number", the *lower* it is in the pecking order. So, if your
Apache
> > is running with as high a "nice number" as 60 ("nice number" is
> Unix-speak
> > for the number used to compute actual process priority :o), it's
grabbing
> > way too little, rather than too much, CPU time. But if "ps -l" (process
> > status, long version) reports Apache with a "PRI" value of 60, rather
than
> a
> > "NICE" value of 60, then you're correct that Apache is gobbling up your
> > system's resources.
> >
> > Have you tried back-tracking, so to speak? Apache, I believe,
ordinarily
> > runs as a single parent process that automatically spawns (generates)
> > several child processes. (I believe the number of children is equal to
> the
> > value you've defined for the MaxClients parameter.) Anyway, if there
are
> > child processes hung up or that won't shut themselves down gracefully,
the
> > parent process might not be able to generate new children. So, when
> you're
> > eyeballing PIDs, it might help to trace them back to their respective
> PPIDs
> > (parent process IDs), if any. In any case, you might be able to use the
> > command "nice" to correct the 60+ priority value. If "ps -el" reports
> > something like " ... PRI 60 NICE 30", syntax something like "nice +20
> > httpd" should result in ps giving you more reasonable output, such as "
> ..
> > PRI 80 NICE 50". (I'm pulling these values off the top of my head,
but
> I
> > think you get the idea.)
> >
> > Re: memory limits, I would tend to think that it's processor time that's
> > your problem. Another command you might want to try, though, in order
to
> > determine the relative weight of both memory and CPU time in your
> situation,
> > is "top". It'll give you a real-time picture. It reports on parameters
> > such as CPU load overall, how much of that is user and how much is
system,
> a
> > breakdown of memory usage by command - lots of good info.
> >
> > Hope this helps.
> >
> > Michele
> > ----- Original Message -----
> > >From: "Cartoon Factory" <ga...@cartoon-factory.com>
> > To: <us...@httpd.apache.org>
> > Sent: Friday, August 02, 2002 1:33 PM
> > Subject: Server going Wild
> >
> >
> > > Hi:
> > >
> > > I am running Apache 1.3.26 on FreeBSD 4.6
> > >
> > > I have an occasional problem with processes running wild... it just
> starts
> > > snowballing, gobbling up memory are resources, and slowing things way
> > down.
> > >
> > > I am trying to track down the cause of this, but thus far, I have had
no
> > > luck. I have added PID to the access logs, and when this runs wild, I
> > search
> > > for that PID, but I have not yet been able to catch what is causing
> this.
> > >
> > > So, in the meantime, I want to see if I can configure Apache to close
> down
> > > the wild processes. I have noticed that when it get's going, the
> Priority
> > > shoots way up to 60+. Is there a way (or, better, WHAT is the way) I
can
> > > have apache shut down a process that has a priority over 60? Is this
> wise?
> > >
> > > I have tried RLimitMEM (RLimitMEM 40000 50000), but that does not
allow
> > some
> > > cgi scripts to run... should I use that instead, and set the limits
> higher
> > > (and how high?).
> > >
> > > Any other suggestions so I do not have to stay glued to TOP?
> > >
> > > I am a real newbie, (sorry) so please be a bit verbose in your
response,
>
> > so
> > > I can understand!
> > >
> > > Thank You!
> > > -------------------
> > >
> > > Dave Koch
> > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > > For additional commands, e-mail: users-help@httpd.apache.org
> > >
> > >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org
> >
> >
> >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
RE: Server going Wild
Posted by Cartoon Factory <ga...@cartoon-factory.com>.
Michele:
Thanks for your insight! I am not afraid of recompiling if I have to. For
the most part, when I put it all together, I did not do much special. I for
sure do not remember anything to do with nice levels, or monk eying with
that (to be honest, I would not know how.)
I personally think I have a CGI script (run from a web page) that is running
wild, that does not terminate, and just goes crazy.
I THINK I might have found the root cause, things have been stable for a
while. I hope I caught it....
Thank You!
-------------------
Dave Koch
-----Original Message-----
From: Michele Petrovsky [mailto:tpark@voicenet.com]
Sent: Friday, August 02, 2002 1:38 PM
To: users@httpd.apache.org
Cc: shinton.d@gmc.edu; rocque.m@gmc.edu; Tom Parkinson
Subject: Re: Server going Wild
Dave, it definitely looks like something in how Apache is configured is
causing the children to go loco. Output sample very helpful. Given those
numbers, for some reason when the parent httpd (which itself seems to me to
have a rather high priority) spawns its kids, it gives them nice and PRI
numbers way out of keeping with its own.
I'm not knowledgeable enough about Apache to know which (if any) of its
config params would control something like this. Quick fix probably would
be to "nice" the parent up/down to NICE/PRI numbers that are more reasonable
(maybe 180 PRI?) Then, even if the parent spawns children with even more
clout than it has, the numbers for those children should still be fairly
reasonable. For instance, applying the ratio demonstrated in your sample
output, "nicing" the parent httpd down to a 180 PRI should, hopefully, bring
the children down to, maybe, an 80 or 90 in that department.
I noticed too that not only all your httpds but all your other processes
have a nice number of 0, which I've *never* seen. All the Unix (H-P mostly)
and Linux (Red Hat mostly) boxes I've dealt with have nice set largely or
exclusively to 20, with the occasional but fairly rare 10. Could it be that
in compiling your kernel the default nice number was set too low? If that's
the case, you may need to reconfigure/recompile.
But hang on; further investigation in progress ... :o)
----- Original Message -----
>From: "Cartoon Factory" <ga...@cartoon-factory.com>
To: <us...@httpd.apache.org>
Sent: Friday, August 02, 2002 2:58 PM
Subject: RE: Server going Wild
> Michelle:
>
> Thanks for the help. I guess I did not explain too well. I am watching
> top... and all of a sudden a process will just take off. Typically, the
> httpd PRI number in TOP is 2... but the runaway will shoot way up to 64.
My
> typical size is 20000K- these will shoot up to the 150M range and WCPU and
> CPU will go from 2-5 % to 80%.
>
> So I sit here all day and watch TOP and kill those bad processes. I wish I
> COULD figure out what causes them! In the meantime, I wanted to figure out
> how I could get apache to say, "Wow, this one is way out of normal
> parameters..." and kill it itself.
>
> I also noticed when the runaway starts, and I kill it, I usually have
about
> 5-10 other processes to kill.... I take one down, another springs up like
a
> hydra!
>
> Here is one starting (from top):
>
> PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
> 82353 nobody 55 0 37060K 25424K RUN 0:08 44.99% 30.76% httpd
> 81539 nobody 2 0 20852K 18060K sbwait 0:02 0.93% 0.93% httpd
> 82352 nobody 2 0 19992K 17308K sbwait 0:00 1.29% 0.88% httpd
> 82087 nobody 2 0 24308K 21676K sbwait 1:40 0.29% 0.29% httpd
> 81471 nobody 2 0 19992K 17448K accept 0:02 0.24% 0.24% httpd
> 82307 nobody 2 0 19992K 17296K accept 0:00 0.25% 0.24% httpd
> 81466 nobody 2 0 20416K 17900K sbwait 0:02 0.15% 0.15% httpd
> 81542 nobody 2 0 20420K 18000K sbwait 0:02 0.05% 0.05% httpd
> 109 root 2 0 6344K 2092K select 3:24 0.00% 0.00% perl
> 5914 root 2 0 1792K 516K select 1:11 0.00% 0.00% sendmail
> 82 root 10 0 992K 232K nanslp 0:11 0.00% 0.00% cron
> 79875 root 28 0 1992K 1020K RUN 0:06 0.00% 0.00% top
> 89 root 2 0 916K 108K select 0:05 0.00% 0.00% usbd
> 81467 nobody 2 0 21776K 19184K sbwait 0:05 0.00% 0.00% httpd
> 74400 root 2 0 2476K 984K select 0:04 0.00% 0.00% sshd
> 81472 nobody 2 0 21316K 18708K sbwait 0:03 0.00% 0.00% httpd
>
> Thank You!
> -------------------
>
> Dave Koch
>
> -----Original Message-----
> From: Michele Petrovsky [mailto:tpark@voicenet.com]
> Sent: Friday, August 02, 2002 12:41 PM
> To: users@httpd.apache.org
> Cc: rocque.m@gmc.edu; Tom Parkinson
> Subject: Re: Server going Wild
>
>
> If I'm not mistaken, the higher the integer value of a Unix/Linux
process's
> "nice number", the *lower* it is in the pecking order. So, if your Apache
> is running with as high a "nice number" as 60 ("nice number" is
Unix-speak
> for the number used to compute actual process priority :o), it's grabbing
> way too little, rather than too much, CPU time. But if "ps -l" (process
> status, long version) reports Apache with a "PRI" value of 60, rather than
a
> "NICE" value of 60, then you're correct that Apache is gobbling up your
> system's resources.
>
> Have you tried back-tracking, so to speak? Apache, I believe, ordinarily
> runs as a single parent process that automatically spawns (generates)
> several child processes. (I believe the number of children is equal to
the
> value you've defined for the MaxClients parameter.) Anyway, if there are
> child processes hung up or that won't shut themselves down gracefully, the
> parent process might not be able to generate new children. So, when
you're
> eyeballing PIDs, it might help to trace them back to their respective
PPIDs
> (parent process IDs), if any. In any case, you might be able to use the
> command "nice" to correct the 60+ priority value. If "ps -el" reports
> something like " ... PRI 60 NICE 30", syntax something like "nice +20
> httpd" should result in ps giving you more reasonable output, such as "
..
> PRI 80 NICE 50". (I'm pulling these values off the top of my head, but
I
> think you get the idea.)
>
> Re: memory limits, I would tend to think that it's processor time that's
> your problem. Another command you might want to try, though, in order to
> determine the relative weight of both memory and CPU time in your
situation,
> is "top". It'll give you a real-time picture. It reports on parameters
> such as CPU load overall, how much of that is user and how much is system,
a
> breakdown of memory usage by command - lots of good info.
>
> Hope this helps.
>
> Michele
> ----- Original Message -----
> >From: "Cartoon Factory" <ga...@cartoon-factory.com>
> To: <us...@httpd.apache.org>
> Sent: Friday, August 02, 2002 1:33 PM
> Subject: Server going Wild
>
>
> > Hi:
> >
> > I am running Apache 1.3.26 on FreeBSD 4.6
> >
> > I have an occasional problem with processes running wild... it just
starts
> > snowballing, gobbling up memory are resources, and slowing things way
> down.
> >
> > I am trying to track down the cause of this, but thus far, I have had no
> > luck. I have added PID to the access logs, and when this runs wild, I
> search
> > for that PID, but I have not yet been able to catch what is causing
this.
> >
> > So, in the meantime, I want to see if I can configure Apache to close
down
> > the wild processes. I have noticed that when it get's going, the
Priority
> > shoots way up to 60+. Is there a way (or, better, WHAT is the way) I can
> > have apache shut down a process that has a priority over 60? Is this
wise?
> >
> > I have tried RLimitMEM (RLimitMEM 40000 50000), but that does not allow
> some
> > cgi scripts to run... should I use that instead, and set the limits
higher
> > (and how high?).
> >
> > Any other suggestions so I do not have to stay glued to TOP?
> >
> > I am a real newbie, (sorry) so please be a bit verbose in your response,
> so
> > I can understand!
> >
> > Thank You!
> > -------------------
> >
> > Dave Koch
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: Server going Wild
Posted by Michele Petrovsky <tp...@voicenet.com>.
Dave, it definitely looks like something in how Apache is configured is
causing the children to go loco. Output sample very helpful. Given those
numbers, for some reason when the parent httpd (which itself seems to me to
have a rather high priority) spawns its kids, it gives them nice and PRI
numbers way out of keeping with its own.
I'm not knowledgeable enough about Apache to know which (if any) of its
config params would control something like this. Quick fix probably would
be to "nice" the parent up/down to NICE/PRI numbers that are more reasonable
(maybe 180 PRI?) Then, even if the parent spawns children with even more
clout than it has, the numbers for those children should still be fairly
reasonable. For instance, applying the ratio demonstrated in your sample
output, "nicing" the parent httpd down to a 180 PRI should, hopefully, bring
the children down to, maybe, an 80 or 90 in that department.
I noticed too that not only all your httpds but all your other processes
have a nice number of 0, which I've *never* seen. All the Unix (H-P mostly)
and Linux (Red Hat mostly) boxes I've dealt with have nice set largely or
exclusively to 20, with the occasional but fairly rare 10. Could it be that
in compiling your kernel the default nice number was set too low? If that's
the case, you may need to reconfigure/recompile.
But hang on; further investigation in progress ... :o)
----- Original Message -----
From: "Cartoon Factory" <ga...@cartoon-factory.com>
To: <us...@httpd.apache.org>
Sent: Friday, August 02, 2002 2:58 PM
Subject: RE: Server going Wild
> Michelle:
>
> Thanks for the help. I guess I did not explain too well. I am watching
> top... and all of a sudden a process will just take off. Typically, the
> httpd PRI number in TOP is 2... but the runaway will shoot way up to 64.
My
> typical size is 20000K- these will shoot up to the 150M range and WCPU and
> CPU will go from 2-5 % to 80%.
>
> So I sit here all day and watch TOP and kill those bad processes. I wish I
> COULD figure out what causes them! In the meantime, I wanted to figure out
> how I could get apache to say, "Wow, this one is way out of normal
> parameters..." and kill it itself.
>
> I also noticed when the runaway starts, and I kill it, I usually have
about
> 5-10 other processes to kill.... I take one down, another springs up like
a
> hydra!
>
> Here is one starting (from top):
>
> PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
> 82353 nobody 55 0 37060K 25424K RUN 0:08 44.99% 30.76% httpd
> 81539 nobody 2 0 20852K 18060K sbwait 0:02 0.93% 0.93% httpd
> 82352 nobody 2 0 19992K 17308K sbwait 0:00 1.29% 0.88% httpd
> 82087 nobody 2 0 24308K 21676K sbwait 1:40 0.29% 0.29% httpd
> 81471 nobody 2 0 19992K 17448K accept 0:02 0.24% 0.24% httpd
> 82307 nobody 2 0 19992K 17296K accept 0:00 0.25% 0.24% httpd
> 81466 nobody 2 0 20416K 17900K sbwait 0:02 0.15% 0.15% httpd
> 81542 nobody 2 0 20420K 18000K sbwait 0:02 0.05% 0.05% httpd
> 109 root 2 0 6344K 2092K select 3:24 0.00% 0.00% perl
> 5914 root 2 0 1792K 516K select 1:11 0.00% 0.00% sendmail
> 82 root 10 0 992K 232K nanslp 0:11 0.00% 0.00% cron
> 79875 root 28 0 1992K 1020K RUN 0:06 0.00% 0.00% top
> 89 root 2 0 916K 108K select 0:05 0.00% 0.00% usbd
> 81467 nobody 2 0 21776K 19184K sbwait 0:05 0.00% 0.00% httpd
> 74400 root 2 0 2476K 984K select 0:04 0.00% 0.00% sshd
> 81472 nobody 2 0 21316K 18708K sbwait 0:03 0.00% 0.00% httpd
>
> Thank You!
> -------------------
>
> Dave Koch
>
> -----Original Message-----
> From: Michele Petrovsky [mailto:tpark@voicenet.com]
> Sent: Friday, August 02, 2002 12:41 PM
> To: users@httpd.apache.org
> Cc: rocque.m@gmc.edu; Tom Parkinson
> Subject: Re: Server going Wild
>
>
> If I'm not mistaken, the higher the integer value of a Unix/Linux
process's
> "nice number", the *lower* it is in the pecking order. So, if your Apache
> is running with as high a "nice number" as 60 ("nice number" is
Unix-speak
> for the number used to compute actual process priority :o), it's grabbing
> way too little, rather than too much, CPU time. But if "ps -l" (process
> status, long version) reports Apache with a "PRI" value of 60, rather than
a
> "NICE" value of 60, then you're correct that Apache is gobbling up your
> system's resources.
>
> Have you tried back-tracking, so to speak? Apache, I believe, ordinarily
> runs as a single parent process that automatically spawns (generates)
> several child processes. (I believe the number of children is equal to
the
> value you've defined for the MaxClients parameter.) Anyway, if there are
> child processes hung up or that won't shut themselves down gracefully, the
> parent process might not be able to generate new children. So, when
you're
> eyeballing PIDs, it might help to trace them back to their respective
PPIDs
> (parent process IDs), if any. In any case, you might be able to use the
> command "nice" to correct the 60+ priority value. If "ps -el" reports
> something like " ... PRI 60 NICE 30", syntax something like "nice +20
> httpd" should result in ps giving you more reasonable output, such as "
...
> PRI 80 NICE 50". (I'm pulling these values off the top of my head, but
I
> think you get the idea.)
>
> Re: memory limits, I would tend to think that it's processor time that's
> your problem. Another command you might want to try, though, in order to
> determine the relative weight of both memory and CPU time in your
situation,
> is "top". It'll give you a real-time picture. It reports on parameters
> such as CPU load overall, how much of that is user and how much is system,
a
> breakdown of memory usage by command - lots of good info.
>
> Hope this helps.
>
> Michele
> ----- Original Message -----
> >From: "Cartoon Factory" <ga...@cartoon-factory.com>
> To: <us...@httpd.apache.org>
> Sent: Friday, August 02, 2002 1:33 PM
> Subject: Server going Wild
>
>
> > Hi:
> >
> > I am running Apache 1.3.26 on FreeBSD 4.6
> >
> > I have an occasional problem with processes running wild... it just
starts
> > snowballing, gobbling up memory are resources, and slowing things way
> down.
> >
> > I am trying to track down the cause of this, but thus far, I have had no
> > luck. I have added PID to the access logs, and when this runs wild, I
> search
> > for that PID, but I have not yet been able to catch what is causing
this.
> >
> > So, in the meantime, I want to see if I can configure Apache to close
down
> > the wild processes. I have noticed that when it get's going, the
Priority
> > shoots way up to 60+. Is there a way (or, better, WHAT is the way) I can
> > have apache shut down a process that has a priority over 60? Is this
wise?
> >
> > I have tried RLimitMEM (RLimitMEM 40000 50000), but that does not allow
> some
> > cgi scripts to run... should I use that instead, and set the limits
higher
> > (and how high?).
> >
> > Any other suggestions so I do not have to stay glued to TOP?
> >
> > I am a real newbie, (sorry) so please be a bit verbose in your response,
> so
> > I can understand!
> >
> > Thank You!
> > -------------------
> >
> > Dave Koch
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
RE: Server going Wild
Posted by Cartoon Factory <ga...@cartoon-factory.com>.
Michelle:
Thanks for the help. I guess I did not explain too well. I am watching
top... and all of a sudden a process will just take off. Typically, the
httpd PRI number in TOP is 2... but the runaway will shoot way up to 64. My
typical size is 20000K- these will shoot up to the 150M range and WCPU and
CPU will go from 2-5 % to 80%.
So I sit here all day and watch TOP and kill those bad processes. I wish I
COULD figure out what causes them! In the meantime, I wanted to figure out
how I could get apache to say, "Wow, this one is way out of normal
parameters..." and kill it itself.
I also noticed when the runaway starts, and I kill it, I usually have about
5-10 other processes to kill.... I take one down, another springs up like a
hydra!
Here is one starting (from top):
PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
82353 nobody 55 0 37060K 25424K RUN 0:08 44.99% 30.76% httpd
81539 nobody 2 0 20852K 18060K sbwait 0:02 0.93% 0.93% httpd
82352 nobody 2 0 19992K 17308K sbwait 0:00 1.29% 0.88% httpd
82087 nobody 2 0 24308K 21676K sbwait 1:40 0.29% 0.29% httpd
81471 nobody 2 0 19992K 17448K accept 0:02 0.24% 0.24% httpd
82307 nobody 2 0 19992K 17296K accept 0:00 0.25% 0.24% httpd
81466 nobody 2 0 20416K 17900K sbwait 0:02 0.15% 0.15% httpd
81542 nobody 2 0 20420K 18000K sbwait 0:02 0.05% 0.05% httpd
109 root 2 0 6344K 2092K select 3:24 0.00% 0.00% perl
5914 root 2 0 1792K 516K select 1:11 0.00% 0.00% sendmail
82 root 10 0 992K 232K nanslp 0:11 0.00% 0.00% cron
79875 root 28 0 1992K 1020K RUN 0:06 0.00% 0.00% top
89 root 2 0 916K 108K select 0:05 0.00% 0.00% usbd
81467 nobody 2 0 21776K 19184K sbwait 0:05 0.00% 0.00% httpd
74400 root 2 0 2476K 984K select 0:04 0.00% 0.00% sshd
81472 nobody 2 0 21316K 18708K sbwait 0:03 0.00% 0.00% httpd
Thank You!
-------------------
Dave Koch
-----Original Message-----
From: Michele Petrovsky [mailto:tpark@voicenet.com]
Sent: Friday, August 02, 2002 12:41 PM
To: users@httpd.apache.org
Cc: rocque.m@gmc.edu; Tom Parkinson
Subject: Re: Server going Wild
If I'm not mistaken, the higher the integer value of a Unix/Linux process's
"nice number", the *lower* it is in the pecking order. So, if your Apache
is running with as high a "nice number" as 60 ("nice number" is Unix-speak
for the number used to compute actual process priority :o), it's grabbing
way too little, rather than too much, CPU time. But if "ps -l" (process
status, long version) reports Apache with a "PRI" value of 60, rather than a
"NICE" value of 60, then you're correct that Apache is gobbling up your
system's resources.
Have you tried back-tracking, so to speak? Apache, I believe, ordinarily
runs as a single parent process that automatically spawns (generates)
several child processes. (I believe the number of children is equal to the
value you've defined for the MaxClients parameter.) Anyway, if there are
child processes hung up or that won't shut themselves down gracefully, the
parent process might not be able to generate new children. So, when you're
eyeballing PIDs, it might help to trace them back to their respective PPIDs
(parent process IDs), if any. In any case, you might be able to use the
command "nice" to correct the 60+ priority value. If "ps -el" reports
something like " ... PRI 60 NICE 30", syntax something like "nice +20
httpd" should result in ps giving you more reasonable output, such as " ...
PRI 80 NICE 50". (I'm pulling these values off the top of my head, but I
think you get the idea.)
Re: memory limits, I would tend to think that it's processor time that's
your problem. Another command you might want to try, though, in order to
determine the relative weight of both memory and CPU time in your situation,
is "top". It'll give you a real-time picture. It reports on parameters
such as CPU load overall, how much of that is user and how much is system, a
breakdown of memory usage by command - lots of good info.
Hope this helps.
Michele
----- Original Message -----
>From: "Cartoon Factory" <ga...@cartoon-factory.com>
To: <us...@httpd.apache.org>
Sent: Friday, August 02, 2002 1:33 PM
Subject: Server going Wild
> Hi:
>
> I am running Apache 1.3.26 on FreeBSD 4.6
>
> I have an occasional problem with processes running wild... it just starts
> snowballing, gobbling up memory are resources, and slowing things way
down.
>
> I am trying to track down the cause of this, but thus far, I have had no
> luck. I have added PID to the access logs, and when this runs wild, I
search
> for that PID, but I have not yet been able to catch what is causing this.
>
> So, in the meantime, I want to see if I can configure Apache to close down
> the wild processes. I have noticed that when it get's going, the Priority
> shoots way up to 60+. Is there a way (or, better, WHAT is the way) I can
> have apache shut down a process that has a priority over 60? Is this wise?
>
> I have tried RLimitMEM (RLimitMEM 40000 50000), but that does not allow
some
> cgi scripts to run... should I use that instead, and set the limits higher
> (and how high?).
>
> Any other suggestions so I do not have to stay glued to TOP?
>
> I am a real newbie, (sorry) so please be a bit verbose in your response,
so
> I can understand!
>
> Thank You!
> -------------------
>
> Dave Koch
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: Server going Wild
Posted by Michele Petrovsky <tp...@voicenet.com>.
If I'm not mistaken, the higher the integer value of a Unix/Linux process's
"nice number", the *lower* it is in the pecking order. So, if your Apache
is running with as high a "nice number" as 60 ("nice number" is Unix-speak
for the number used to compute actual process priority :o), it's grabbing
way too little, rather than too much, CPU time. But if "ps -l" (process
status, long version) reports Apache with a "PRI" value of 60, rather than a
"NICE" value of 60, then you're correct that Apache is gobbling up your
system's resources.
Have you tried back-tracking, so to speak? Apache, I believe, ordinarily
runs as a single parent process that automatically spawns (generates)
several child processes. (I believe the number of children is equal to the
value you've defined for the MaxClients parameter.) Anyway, if there are
child processes hung up or that won't shut themselves down gracefully, the
parent process might not be able to generate new children. So, when you're
eyeballing PIDs, it might help to trace them back to their respective PPIDs
(parent process IDs), if any. In any case, you might be able to use the
command "nice" to correct the 60+ priority value. If "ps -el" reports
something like " ... PRI 60 NICE 30", syntax something like "nice +20
httpd" should result in ps giving you more reasonable output, such as " ...
PRI 80 NICE 50". (I'm pulling these values off the top of my head, but I
think you get the idea.)
Re: memory limits, I would tend to think that it's processor time that's
your problem. Another command you might want to try, though, in order to
determine the relative weight of both memory and CPU time in your situation,
is "top". It'll give you a real-time picture. It reports on parameters
such as CPU load overall, how much of that is user and how much is system, a
breakdown of memory usage by command - lots of good info.
Hope this helps.
Michele
----- Original Message -----
From: "Cartoon Factory" <ga...@cartoon-factory.com>
To: <us...@httpd.apache.org>
Sent: Friday, August 02, 2002 1:33 PM
Subject: Server going Wild
> Hi:
>
> I am running Apache 1.3.26 on FreeBSD 4.6
>
> I have an occasional problem with processes running wild... it just starts
> snowballing, gobbling up memory are resources, and slowing things way
down.
>
> I am trying to track down the cause of this, but thus far, I have had no
> luck. I have added PID to the access logs, and when this runs wild, I
search
> for that PID, but I have not yet been able to catch what is causing this.
>
> So, in the meantime, I want to see if I can configure Apache to close down
> the wild processes. I have noticed that when it get's going, the Priority
> shoots way up to 60+. Is there a way (or, better, WHAT is the way) I can
> have apache shut down a process that has a priority over 60? Is this wise?
>
> I have tried RLimitMEM (RLimitMEM 40000 50000), but that does not allow
some
> cgi scripts to run... should I use that instead, and set the limits higher
> (and how high?).
>
> Any other suggestions so I do not have to stay glued to TOP?
>
> I am a real newbie, (sorry) so please be a bit verbose in your response,
so
> I can understand!
>
> Thank You!
> -------------------
>
> Dave Koch
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org