You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@corinthia.apache.org by pm...@apache.org on 2015/04/24 18:17:36 UTC
[09/55] [abbrv] incubator-corinthia git commit: removed zlib
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/examples/zran.c
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/examples/zran.c b/DocFormats/platform/3rdparty/zlib-1.2.8/examples/zran.c
deleted file mode 100644
index 278f9ad..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/examples/zran.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/* zran.c -- example of zlib/gzip stream indexing and random access
- * Copyright (C) 2005, 2012 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- Version 1.1 29 Sep 2012 Mark Adler */
-
-/* Version History:
- 1.0 29 May 2005 First version
- 1.1 29 Sep 2012 Fix memory reallocation error
- */
-
-/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary()
- for random access of a compressed file. A file containing a zlib or gzip
- stream is provided on the command line. The compressed stream is decoded in
- its entirety, and an index built with access points about every SPAN bytes
- in the uncompressed output. The compressed file is left open, and can then
- be read randomly, having to decompress on the average SPAN/2 uncompressed
- bytes before getting to the desired block of data.
-
- An access point can be created at the start of any deflate block, by saving
- the starting file offset and bit of that block, and the 32K bytes of
- uncompressed data that precede that block. Also the uncompressed offset of
- that block is saved to provide a referece for locating a desired starting
- point in the uncompressed stream. build_index() works by decompressing the
- input zlib or gzip stream a block at a time, and at the end of each block
- deciding if enough uncompressed data has gone by to justify the creation of
- a new access point. If so, that point is saved in a data structure that
- grows as needed to accommodate the points.
-
- To use the index, an offset in the uncompressed data is provided, for which
- the latest accees point at or preceding that offset is located in the index.
- The input file is positioned to the specified location in the index, and if
- necessary the first few bits of the compressed data is read from the file.
- inflate is initialized with those bits and the 32K of uncompressed data, and
- the decompression then proceeds until the desired offset in the file is
- reached. Then the decompression continues to read the desired uncompressed
- data from the file.
-
- Another approach would be to generate the index on demand. In that case,
- requests for random access reads from the compressed data would try to use
- the index, but if a read far enough past the end of the index is required,
- then further index entries would be generated and added.
-
- There is some fair bit of overhead to starting inflation for the random
- access, mainly copying the 32K byte dictionary. So if small pieces of the
- file are being accessed, it would make sense to implement a cache to hold
- some lookahead and avoid many calls to extract() for small lengths.
-
- Another way to build an index would be to use inflateCopy(). That would
- not be constrained to have access points at block boundaries, but requires
- more memory per access point, and also cannot be saved to file due to the
- use of pointers in the state. The approach here allows for storage of the
- index in a file.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "zlib.h"
-
-#define local static
-
-#define SPAN 1048576L /* desired distance between access points */
-#define WINSIZE 32768U /* sliding window size */
-#define CHUNK 16384 /* file input buffer size */
-
-/* access point entry */
-struct point {
- off_t out; /* corresponding offset in uncompressed data */
- off_t in; /* offset in input file of first full byte */
- int bits; /* number of bits (1-7) from byte at in - 1, or 0 */
- unsigned char window[WINSIZE]; /* preceding 32K of uncompressed data */
-};
-
-/* access point list */
-struct access {
- int have; /* number of list entries filled in */
- int size; /* number of list entries allocated */
- struct point *list; /* allocated list */
-};
-
-/* Deallocate an index built by build_index() */
-local void free_index(struct access *index)
-{
- if (index != NULL) {
- free(index->list);
- free(index);
- }
-}
-
-/* Add an entry to the access point list. If out of memory, deallocate the
- existing list and return NULL. */
-local struct access *addpoint(struct access *index, int bits,
- off_t in, off_t out, unsigned left, unsigned char *window)
-{
- struct point *next;
-
- /* if list is empty, create it (start with eight points) */
- if (index == NULL) {
- index = malloc(sizeof(struct access));
- if (index == NULL) return NULL;
- index->list = malloc(sizeof(struct point) << 3);
- if (index->list == NULL) {
- free(index);
- return NULL;
- }
- index->size = 8;
- index->have = 0;
- }
-
- /* if list is full, make it bigger */
- else if (index->have == index->size) {
- index->size <<= 1;
- next = realloc(index->list, sizeof(struct point) * index->size);
- if (next == NULL) {
- free_index(index);
- return NULL;
- }
- index->list = next;
- }
-
- /* fill in entry and increment how many we have */
- next = index->list + index->have;
- next->bits = bits;
- next->in = in;
- next->out = out;
- if (left)
- memcpy(next->window, window + WINSIZE - left, left);
- if (left < WINSIZE)
- memcpy(next->window + left, window, WINSIZE - left);
- index->have++;
-
- /* return list, possibly reallocated */
- return index;
-}
-
-/* Make one entire pass through the compressed stream and build an index, with
- access points about every span bytes of uncompressed output -- span is
- chosen to balance the speed of random access against the memory requirements
- of the list, about 32K bytes per access point. Note that data after the end
- of the first zlib or gzip stream in the file is ignored. build_index()
- returns the number of access points on success (>= 1), Z_MEM_ERROR for out
- of memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a
- file read error. On success, *built points to the resulting index. */
-local int build_index(FILE *in, off_t span, struct access **built)
-{
- int ret;
- off_t totin, totout; /* our own total counters to avoid 4GB limit */
- off_t last; /* totout value of last access point */
- struct access *index; /* access points being generated */
- z_stream strm;
- unsigned char input[CHUNK];
- unsigned char window[WINSIZE];
-
- /* initialize inflate */
- strm.zalloc = Z_NULL;
- strm.zfree = Z_NULL;
- strm.opaque = Z_NULL;
- strm.avail_in = 0;
- strm.next_in = Z_NULL;
- ret = inflateInit2(&strm, 47); /* automatic zlib or gzip decoding */
- if (ret != Z_OK)
- return ret;
-
- /* inflate the input, maintain a sliding window, and build an index -- this
- also validates the integrity of the compressed data using the check
- information at the end of the gzip or zlib stream */
- totin = totout = last = 0;
- index = NULL; /* will be allocated by first addpoint() */
- strm.avail_out = 0;
- do {
- /* get some compressed data from input file */
- strm.avail_in = fread(input, 1, CHUNK, in);
- if (ferror(in)) {
- ret = Z_ERRNO;
- goto build_index_error;
- }
- if (strm.avail_in == 0) {
- ret = Z_DATA_ERROR;
- goto build_index_error;
- }
- strm.next_in = input;
-
- /* process all of that, or until end of stream */
- do {
- /* reset sliding window if necessary */
- if (strm.avail_out == 0) {
- strm.avail_out = WINSIZE;
- strm.next_out = window;
- }
-
- /* inflate until out of input, output, or at end of block --
- update the total input and output counters */
- totin += strm.avail_in;
- totout += strm.avail_out;
- ret = inflate(&strm, Z_BLOCK); /* return at end of block */
- totin -= strm.avail_in;
- totout -= strm.avail_out;
- if (ret == Z_NEED_DICT)
- ret = Z_DATA_ERROR;
- if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
- goto build_index_error;
- if (ret == Z_STREAM_END)
- break;
-
- /* if at end of block, consider adding an index entry (note that if
- data_type indicates an end-of-block, then all of the
- uncompressed data from that block has been delivered, and none
- of the compressed data after that block has been consumed,
- except for up to seven bits) -- the totout == 0 provides an
- entry point after the zlib or gzip header, and assures that the
- index always has at least one access point; we avoid creating an
- access point after the last block by checking bit 6 of data_type
- */
- if ((strm.data_type & 128) && !(strm.data_type & 64) &&
- (totout == 0 || totout - last > span)) {
- index = addpoint(index, strm.data_type & 7, totin,
- totout, strm.avail_out, window);
- if (index == NULL) {
- ret = Z_MEM_ERROR;
- goto build_index_error;
- }
- last = totout;
- }
- } while (strm.avail_in != 0);
- } while (ret != Z_STREAM_END);
-
- /* clean up and return index (release unused entries in list) */
- (void)inflateEnd(&strm);
- index->list = realloc(index->list, sizeof(struct point) * index->have);
- index->size = index->have;
- *built = index;
- return index->size;
-
- /* return error */
- build_index_error:
- (void)inflateEnd(&strm);
- if (index != NULL)
- free_index(index);
- return ret;
-}
-
-/* Use the index to read len bytes from offset into buf, return bytes read or
- negative for error (Z_DATA_ERROR or Z_MEM_ERROR). If data is requested past
- the end of the uncompressed data, then extract() will return a value less
- than len, indicating how much as actually read into buf. This function
- should not return a data error unless the file was modified since the index
- was generated. extract() may also return Z_ERRNO if there is an error on
- reading or seeking the input file. */
-local int extract(FILE *in, struct access *index, off_t offset,
- unsigned char *buf, int len)
-{
- int ret, skip;
- z_stream strm;
- struct point *here;
- unsigned char input[CHUNK];
- unsigned char discard[WINSIZE];
-
- /* proceed only if something reasonable to do */
- if (len < 0)
- return 0;
-
- /* find where in stream to start */
- here = index->list;
- ret = index->have;
- while (--ret && here[1].out <= offset)
- here++;
-
- /* initialize file and inflate state to start there */
- strm.zalloc = Z_NULL;
- strm.zfree = Z_NULL;
- strm.opaque = Z_NULL;
- strm.avail_in = 0;
- strm.next_in = Z_NULL;
- ret = inflateInit2(&strm, -15); /* raw inflate */
- if (ret != Z_OK)
- return ret;
- ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET);
- if (ret == -1)
- goto extract_ret;
- if (here->bits) {
- ret = getc(in);
- if (ret == -1) {
- ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR;
- goto extract_ret;
- }
- (void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits));
- }
- (void)inflateSetDictionary(&strm, here->window, WINSIZE);
-
- /* skip uncompressed bytes until offset reached, then satisfy request */
- offset -= here->out;
- strm.avail_in = 0;
- skip = 1; /* while skipping to offset */
- do {
- /* define where to put uncompressed data, and how much */
- if (offset == 0 && skip) { /* at offset now */
- strm.avail_out = len;
- strm.next_out = buf;
- skip = 0; /* only do this once */
- }
- if (offset > WINSIZE) { /* skip WINSIZE bytes */
- strm.avail_out = WINSIZE;
- strm.next_out = discard;
- offset -= WINSIZE;
- }
- else if (offset != 0) { /* last skip */
- strm.avail_out = (unsigned)offset;
- strm.next_out = discard;
- offset = 0;
- }
-
- /* uncompress until avail_out filled, or end of stream */
- do {
- if (strm.avail_in == 0) {
- strm.avail_in = fread(input, 1, CHUNK, in);
- if (ferror(in)) {
- ret = Z_ERRNO;
- goto extract_ret;
- }
- if (strm.avail_in == 0) {
- ret = Z_DATA_ERROR;
- goto extract_ret;
- }
- strm.next_in = input;
- }
- ret = inflate(&strm, Z_NO_FLUSH); /* normal inflate */
- if (ret == Z_NEED_DICT)
- ret = Z_DATA_ERROR;
- if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
- goto extract_ret;
- if (ret == Z_STREAM_END)
- break;
- } while (strm.avail_out != 0);
-
- /* if reach end of stream, then don't keep trying to get more */
- if (ret == Z_STREAM_END)
- break;
-
- /* do until offset reached and requested data read, or stream ends */
- } while (skip);
-
- /* compute number of uncompressed bytes read after offset */
- ret = skip ? 0 : len - strm.avail_out;
-
- /* clean up and return bytes read or error */
- extract_ret:
- (void)inflateEnd(&strm);
- return ret;
-}
-
-/* Demonstrate the use of build_index() and extract() by processing the file
- provided on the command line, and the extracting 16K from about 2/3rds of
- the way through the uncompressed output, and writing that to stdout. */
-int main(int argc, char **argv)
-{
- int len;
- off_t offset;
- FILE *in;
- struct access *index = NULL;
- unsigned char buf[CHUNK];
-
- /* open input file */
- if (argc != 2) {
- fprintf(stderr, "usage: zran file.gz\n");
- return 1;
- }
- in = fopen(argv[1], "rb");
- if (in == NULL) {
- fprintf(stderr, "zran: could not open %s for reading\n", argv[1]);
- return 1;
- }
-
- /* build index */
- len = build_index(in, SPAN, &index);
- if (len < 0) {
- fclose(in);
- switch (len) {
- case Z_MEM_ERROR:
- fprintf(stderr, "zran: out of memory\n");
- break;
- case Z_DATA_ERROR:
- fprintf(stderr, "zran: compressed data error in %s\n", argv[1]);
- break;
- case Z_ERRNO:
- fprintf(stderr, "zran: read error on %s\n", argv[1]);
- break;
- default:
- fprintf(stderr, "zran: error %d while building index\n", len);
- }
- return 1;
- }
- fprintf(stderr, "zran: built index with %d access points\n", len);
-
- /* use index by reading some bytes from an arbitrary offset */
- offset = (index->list[index->have - 1].out << 1) / 3;
- len = extract(in, index, offset, buf, CHUNK);
- if (len < 0)
- fprintf(stderr, "zran: extraction failed: %s error\n",
- len == Z_MEM_ERROR ? "out of memory" : "input corrupted");
- else {
- fwrite(buf, 1, len, stdout);
- fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset);
- }
-
- /* clean up and exit */
- free_index(index);
- fclose(in);
- return 0;
-}
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/gzclose.c
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/gzclose.c b/DocFormats/platform/3rdparty/zlib-1.2.8/gzclose.c
deleted file mode 100644
index caeb99a..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/gzclose.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* gzclose.c -- zlib gzclose() function
- * Copyright (C) 2004, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* gzclose() is in a separate file so that it is linked in only if it is used.
- That way the other gzclose functions can be used instead to avoid linking in
- unneeded compression or decompression routines. */
-int ZEXPORT gzclose(file)
- gzFile file;
-{
-#ifndef NO_GZCOMPRESS
- gz_statep state;
-
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
-
- return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
-#else
- return gzclose_r(file);
-#endif
-}
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/gzguts.h
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/gzguts.h b/DocFormats/platform/3rdparty/zlib-1.2.8/gzguts.h
deleted file mode 100644
index d87659d..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/gzguts.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#ifdef _LARGEFILE64_SOURCE
-# ifndef _LARGEFILE_SOURCE
-# define _LARGEFILE_SOURCE 1
-# endif
-# ifdef _FILE_OFFSET_BITS
-# undef _FILE_OFFSET_BITS
-# endif
-#endif
-
-#ifdef HAVE_HIDDEN
-# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#else
-# define ZLIB_INTERNAL
-#endif
-
-#include <stdio.h>
-#include "zlib.h"
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-# include <limits.h>
-#endif
-#include <fcntl.h>
-
-#ifdef _WIN32
-# include <stddef.h>
-#endif
-
-#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
-# include <io.h>
-#endif
-
-#ifdef WINAPI_FAMILY
-# define open _open
-# define read _read
-# define write _write
-# define close _close
-#endif
-
-#ifdef NO_DEFLATE /* for compatibility with old definition */
-# define NO_GZCOMPRESS
-#endif
-
-#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
-# ifndef HAVE_VSNPRINTF
-# define HAVE_VSNPRINTF
-# endif
-#endif
-
-#if defined(__CYGWIN__)
-# ifndef HAVE_VSNPRINTF
-# define HAVE_VSNPRINTF
-# endif
-#endif
-
-#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
-# ifndef HAVE_VSNPRINTF
-# define HAVE_VSNPRINTF
-# endif
-#endif
-
-#ifndef HAVE_VSNPRINTF
-# ifdef MSDOS
-/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
- but for now we just assume it doesn't. */
-# define NO_vsnprintf
-# endif
-# ifdef __TURBOC__
-# define NO_vsnprintf
-# endif
-# ifdef WIN32
-/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
-# if !defined(vsnprintf) && !defined(NO_vsnprintf)
-# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
-# define vsnprintf _vsnprintf
-# endif
-# endif
-# endif
-# ifdef __SASC
-# define NO_vsnprintf
-# endif
-# ifdef VMS
-# define NO_vsnprintf
-# endif
-# ifdef __OS400__
-# define NO_vsnprintf
-# endif
-# ifdef __MVS__
-# define NO_vsnprintf
-# endif
-#endif
-
-/* unlike snprintf (which is required in C99, yet still not supported by
- Microsoft more than a decade later!), _snprintf does not guarantee null
- termination of the result -- however this is only used in gzlib.c where
- the result is assured to fit in the space provided */
-#ifdef _MSC_VER
-# define snprintf _snprintf
-#endif
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-/* gz* functions always use library allocation functions */
-#ifndef STDC
- extern voidp malloc OF((uInt size));
- extern void free OF((voidpf ptr));
-#endif
-
-/* get errno and strerror definition */
-#if defined UNDER_CE
-# include <windows.h>
-# define zstrerror() gz_strwinerror((DWORD)GetLastError())
-#else
-# ifndef NO_STRERROR
-# include <errno.h>
-# define zstrerror() strerror(errno)
-# else
-# define zstrerror() "stdio error (consult errno)"
-# endif
-#endif
-
-/* provide prototypes for these when building zlib without LFS */
-#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
- ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
- ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
- ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
- ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
-#endif
-
-/* default memLevel */
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-
-/* default i/o buffer size -- double this for output when reading (this and
- twice this must be able to fit in an unsigned type) */
-#define GZBUFSIZE 8192
-
-/* gzip modes, also provide a little integrity check on the passed structure */
-#define GZ_NONE 0
-#define GZ_READ 7247
-#define GZ_WRITE 31153
-#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */
-
-/* values for gz_state how */
-#define LOOK 0 /* look for a gzip header */
-#define COPY 1 /* copy input directly */
-#define GZIP 2 /* decompress a gzip stream */
-
-/* internal gzip file state data structure */
-typedef struct {
- /* exposed contents for gzgetc() macro */
- struct gzFile_s x; /* "x" for exposed */
- /* x.have: number of bytes available at x.next */
- /* x.next: next output data to deliver or write */
- /* x.pos: current position in uncompressed data */
- /* used for both reading and writing */
- int mode; /* see gzip modes above */
- int fd; /* file descriptor */
- char *path; /* path or fd for error messages */
- unsigned size; /* buffer size, zero if not allocated yet */
- unsigned want; /* requested buffer size, default is GZBUFSIZE */
- unsigned char *in; /* input buffer */
- unsigned char *out; /* output buffer (double-sized when reading) */
- int direct; /* 0 if processing gzip, 1 if transparent */
- /* just for reading */
- int how; /* 0: get header, 1: copy, 2: decompress */
- z_off64_t start; /* where the gzip data started, for rewinding */
- int eof; /* true if end of input file reached */
- int past; /* true if read requested past end */
- /* just for writing */
- int level; /* compression level */
- int strategy; /* compression strategy */
- /* seek request */
- z_off64_t skip; /* amount to skip (already rewound if backwards) */
- int seek; /* true if seek request pending */
- /* error information */
- int err; /* error code */
- char *msg; /* error message */
- /* zlib inflate or deflate stream */
- z_stream strm; /* stream structure in-place (not a pointer) */
-} gz_state;
-typedef gz_state FAR *gz_statep;
-
-/* shared functions */
-void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
-#if defined UNDER_CE
-char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
-#endif
-
-/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
- value -- needed when comparing unsigned to z_off64_t, which is signed
- (possible z_off64_t types off_t, off64_t, and long are all signed) */
-#ifdef INT_MAX
-# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
-#else
-unsigned ZLIB_INTERNAL gz_intmax OF((void));
-# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
-#endif
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/gzlib.c
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/gzlib.c b/DocFormats/platform/3rdparty/zlib-1.2.8/gzlib.c
deleted file mode 100644
index fae202e..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/gzlib.c
+++ /dev/null
@@ -1,634 +0,0 @@
-/* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-#if defined(_WIN32) && !defined(__BORLANDC__)
-# define LSEEK _lseeki64
-#else
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-# define LSEEK lseek64
-#else
-# define LSEEK lseek
-#endif
-#endif
-
-/* Local functions */
-local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const void *, int, const char *));
-
-#if defined UNDER_CE
-
-/* Map the Windows error number in ERROR to a locale-dependent error message
- string and return a pointer to it. Typically, the values for ERROR come
- from GetLastError.
-
- The string pointed to shall not be modified by the application, but may be
- overwritten by a subsequent call to gz_strwinerror
-
- The gz_strwinerror function does not change the current setting of
- GetLastError. */
-char ZLIB_INTERNAL *gz_strwinerror (error)
- DWORD error;
-{
- static char buf[1024];
-
- wchar_t *msgbuf;
- DWORD lasterr = GetLastError();
- DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
- | FORMAT_MESSAGE_ALLOCATE_BUFFER,
- NULL,
- error,
- 0, /* Default language */
- (LPVOID)&msgbuf,
- 0,
- NULL);
- if (chars != 0) {
- /* If there is an \r\n appended, zap it. */
- if (chars >= 2
- && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
- chars -= 2;
- msgbuf[chars] = 0;
- }
-
- if (chars > sizeof (buf) - 1) {
- chars = sizeof (buf) - 1;
- msgbuf[chars] = 0;
- }
-
- wcstombs(buf, msgbuf, chars + 1);
- LocalFree(msgbuf);
- }
- else {
- sprintf(buf, "unknown win32 error (%ld)", error);
- }
-
- SetLastError(lasterr);
- return buf;
-}
-
-#endif /* UNDER_CE */
-
-/* Reset gzip file state */
-local void gz_reset(state)
- gz_statep state;
-{
- state->x.have = 0; /* no output data available */
- if (state->mode == GZ_READ) { /* for reading ... */
- state->eof = 0; /* not at end of file */
- state->past = 0; /* have not read past end yet */
- state->how = LOOK; /* look for gzip header */
- }
- state->seek = 0; /* no seek request pending */
- gz_error(state, Z_OK, NULL); /* clear error */
- state->x.pos = 0; /* no uncompressed data yet */
- state->strm.avail_in = 0; /* no input data yet */
-}
-
-/* Open a gzip file either by name or file descriptor. */
-local gzFile gz_open(path, fd, mode)
- const void *path;
- int fd;
- const char *mode;
-{
- gz_statep state;
- size_t len;
- int oflag;
-#ifdef O_CLOEXEC
- int cloexec = 0;
-#endif
-#ifdef O_EXCL
- int exclusive = 0;
-#endif
-
- /* check input */
- if (path == NULL)
- return NULL;
-
- /* allocate gzFile structure to return */
- state = (gz_statep)malloc(sizeof(gz_state));
- if (state == NULL)
- return NULL;
- state->size = 0; /* no buffers allocated yet */
- state->want = GZBUFSIZE; /* requested buffer size */
- state->msg = NULL; /* no error message yet */
-
- /* interpret mode */
- state->mode = GZ_NONE;
- state->level = Z_DEFAULT_COMPRESSION;
- state->strategy = Z_DEFAULT_STRATEGY;
- state->direct = 0;
- while (*mode) {
- if (*mode >= '0' && *mode <= '9')
- state->level = *mode - '0';
- else
- switch (*mode) {
- case 'r':
- state->mode = GZ_READ;
- break;
-#ifndef NO_GZCOMPRESS
- case 'w':
- state->mode = GZ_WRITE;
- break;
- case 'a':
- state->mode = GZ_APPEND;
- break;
-#endif
- case '+': /* can't read and write at the same time */
- free(state);
- return NULL;
- case 'b': /* ignore -- will request binary anyway */
- break;
-#ifdef O_CLOEXEC
- case 'e':
- cloexec = 1;
- break;
-#endif
-#ifdef O_EXCL
- case 'x':
- exclusive = 1;
- break;
-#endif
- case 'f':
- state->strategy = Z_FILTERED;
- break;
- case 'h':
- state->strategy = Z_HUFFMAN_ONLY;
- break;
- case 'R':
- state->strategy = Z_RLE;
- break;
- case 'F':
- state->strategy = Z_FIXED;
- break;
- case 'T':
- state->direct = 1;
- break;
- default: /* could consider as an error, but just ignore */
- ;
- }
- mode++;
- }
-
- /* must provide an "r", "w", or "a" */
- if (state->mode == GZ_NONE) {
- free(state);
- return NULL;
- }
-
- /* can't force transparent read */
- if (state->mode == GZ_READ) {
- if (state->direct) {
- free(state);
- return NULL;
- }
- state->direct = 1; /* for empty file */
- }
-
- /* save the path name for error messages */
-#ifdef _WIN32
- if (fd == -2) {
- len = wcstombs(NULL, path, 0);
- if (len == (size_t)-1)
- len = 0;
- }
- else
-#endif
- len = strlen((const char *)path);
- state->path = (char *)malloc(len + 1);
- if (state->path == NULL) {
- free(state);
- return NULL;
- }
-#ifdef _WIN32
- if (fd == -2)
- if (len)
- wcstombs(state->path, path, len + 1);
- else
- *(state->path) = 0;
- else
-#endif
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
- snprintf(state->path, len + 1, "%s", (const char *)path);
-#else
- strcpy(state->path, path);
-#endif
-
- /* compute the flags for open() */
- oflag =
-#ifdef O_LARGEFILE
- O_LARGEFILE |
-#endif
-#ifdef O_BINARY
- O_BINARY |
-#endif
-#ifdef O_CLOEXEC
- (cloexec ? O_CLOEXEC : 0) |
-#endif
- (state->mode == GZ_READ ?
- O_RDONLY :
- (O_WRONLY | O_CREAT |
-#ifdef O_EXCL
- (exclusive ? O_EXCL : 0) |
-#endif
- (state->mode == GZ_WRITE ?
- O_TRUNC :
- O_APPEND)));
-
- /* open the file with the appropriate flags (or just use fd) */
- state->fd = fd > -1 ? fd : (
-#ifdef _WIN32
- fd == -2 ? _wopen(path, oflag, 0666) :
-#endif
- open((const char *)path, oflag, 0666));
- if (state->fd == -1) {
- free(state->path);
- free(state);
- return NULL;
- }
- if (state->mode == GZ_APPEND)
- state->mode = GZ_WRITE; /* simplify later checks */
-
- /* save the current position for rewinding (only if reading) */
- if (state->mode == GZ_READ) {
- state->start = LSEEK(state->fd, 0, SEEK_CUR);
- if (state->start == -1) state->start = 0;
- }
-
- /* initialize stream */
- gz_reset(state);
-
- /* return stream */
- return (gzFile)state;
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen(path, mode)
- const char *path;
- const char *mode;
-{
- return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen64(path, mode)
- const char *path;
- const char *mode;
-{
- return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzdopen(fd, mode)
- int fd;
- const char *mode;
-{
- char *path; /* identifier for error messages */
- gzFile gz;
-
- if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
- return NULL;
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
- snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd); /* for debugging */
-#else
- sprintf(path, "<fd:%d>", fd); /* for debugging */
-#endif
- gz = gz_open(path, fd, mode);
- free(path);
- return gz;
-}
-
-/* -- see zlib.h -- */
-#ifdef _WIN32
-gzFile ZEXPORT gzopen_w(path, mode)
- const wchar_t *path;
- const char *mode;
-{
- return gz_open(path, -2, mode);
-}
-#endif
-
-/* -- see zlib.h -- */
-int ZEXPORT gzbuffer(file, size)
- gzFile file;
- unsigned size;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return -1;
-
- /* make sure we haven't already allocated memory */
- if (state->size != 0)
- return -1;
-
- /* check and set requested size */
- if (size < 2)
- size = 2; /* need two bytes to check magic header */
- state->want = size;
- return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzrewind(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ ||
- (state->err != Z_OK && state->err != Z_BUF_ERROR))
- return -1;
-
- /* back up and start over */
- if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
- return -1;
- gz_reset(state);
- return 0;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzseek64(file, offset, whence)
- gzFile file;
- z_off64_t offset;
- int whence;
-{
- unsigned n;
- z_off64_t ret;
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return -1;
-
- /* check that there's no error */
- if (state->err != Z_OK && state->err != Z_BUF_ERROR)
- return -1;
-
- /* can only seek from start or relative to current position */
- if (whence != SEEK_SET && whence != SEEK_CUR)
- return -1;
-
- /* normalize offset to a SEEK_CUR specification */
- if (whence == SEEK_SET)
- offset -= state->x.pos;
- else if (state->seek)
- offset += state->skip;
- state->seek = 0;
-
- /* if within raw area while reading, just go there */
- if (state->mode == GZ_READ && state->how == COPY &&
- state->x.pos + offset >= 0) {
- ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR);
- if (ret == -1)
- return -1;
- state->x.have = 0;
- state->eof = 0;
- state->past = 0;
- state->seek = 0;
- gz_error(state, Z_OK, NULL);
- state->strm.avail_in = 0;
- state->x.pos += offset;
- return state->x.pos;
- }
-
- /* calculate skip amount, rewinding if needed for back seek when reading */
- if (offset < 0) {
- if (state->mode != GZ_READ) /* writing -- can't go backwards */
- return -1;
- offset += state->x.pos;
- if (offset < 0) /* before start of file! */
- return -1;
- if (gzrewind(file) == -1) /* rewind, then skip to offset */
- return -1;
- }
-
- /* if reading, skip what's in output buffer (one less gzgetc() check) */
- if (state->mode == GZ_READ) {
- n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ?
- (unsigned)offset : state->x.have;
- state->x.have -= n;
- state->x.next += n;
- state->x.pos += n;
- offset -= n;
- }
-
- /* request skip (if not zero) */
- if (offset) {
- state->seek = 1;
- state->skip = offset;
- }
- return state->x.pos + offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzseek(file, offset, whence)
- gzFile file;
- z_off_t offset;
- int whence;
-{
- z_off64_t ret;
-
- ret = gzseek64(file, (z_off64_t)offset, whence);
- return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gztell64(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return -1;
-
- /* return position */
- return state->x.pos + (state->seek ? state->skip : 0);
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gztell(file)
- gzFile file;
-{
- z_off64_t ret;
-
- ret = gztell64(file);
- return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzoffset64(file)
- gzFile file;
-{
- z_off64_t offset;
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return -1;
-
- /* compute and return effective offset in file */
- offset = LSEEK(state->fd, 0, SEEK_CUR);
- if (offset == -1)
- return -1;
- if (state->mode == GZ_READ) /* reading */
- offset -= state->strm.avail_in; /* don't count buffered input */
- return offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzoffset(file)
- gzFile file;
-{
- z_off64_t ret;
-
- ret = gzoffset64(file);
- return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzeof(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return 0;
-
- /* return end-of-file state */
- return state->mode == GZ_READ ? state->past : 0;
-}
-
-/* -- see zlib.h -- */
-const char * ZEXPORT gzerror(file, errnum)
- gzFile file;
- int *errnum;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return NULL;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return NULL;
-
- /* return error information */
- if (errnum != NULL)
- *errnum = state->err;
- return state->err == Z_MEM_ERROR ? "out of memory" :
- (state->msg == NULL ? "" : state->msg);
-}
-
-/* -- see zlib.h -- */
-void ZEXPORT gzclearerr(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return;
-
- /* clear error and end-of-file */
- if (state->mode == GZ_READ) {
- state->eof = 0;
- state->past = 0;
- }
- gz_error(state, Z_OK, NULL);
-}
-
-/* Create an error message in allocated memory and set state->err and
- state->msg accordingly. Free any previous error message already there. Do
- not try to free or allocate space if the error is Z_MEM_ERROR (out of
- memory). Simply save the error message as a static string. If there is an
- allocation failure constructing the error message, then convert the error to
- out of memory. */
-void ZLIB_INTERNAL gz_error(state, err, msg)
- gz_statep state;
- int err;
- const char *msg;
-{
- /* free previously allocated message and clear */
- if (state->msg != NULL) {
- if (state->err != Z_MEM_ERROR)
- free(state->msg);
- state->msg = NULL;
- }
-
- /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */
- if (err != Z_OK && err != Z_BUF_ERROR)
- state->x.have = 0;
-
- /* set error code, and if no message, then done */
- state->err = err;
- if (msg == NULL)
- return;
-
- /* for an out of memory error, return literal string when requested */
- if (err == Z_MEM_ERROR)
- return;
-
- /* construct error message with path */
- if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) ==
- NULL) {
- state->err = Z_MEM_ERROR;
- return;
- }
-#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
- snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
- "%s%s%s", state->path, ": ", msg);
-#else
- strcpy(state->msg, state->path);
- strcat(state->msg, ": ");
- strcat(state->msg, msg);
-#endif
- return;
-}
-
-#ifndef INT_MAX
-/* portably return maximum value for an int (when limits.h presumed not
- available) -- we need to do this to cover cases where 2's complement not
- used, since C standard permits 1's complement and sign-bit representations,
- otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZLIB_INTERNAL gz_intmax()
-{
- unsigned p, q;
-
- p = 1;
- do {
- q = p;
- p <<= 1;
- p++;
- } while (p > q);
- return q >> 1;
-}
-#endif
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/gzread.c
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/gzread.c b/DocFormats/platform/3rdparty/zlib-1.2.8/gzread.c
deleted file mode 100644
index bf4538e..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/gzread.c
+++ /dev/null
@@ -1,594 +0,0 @@
-/* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
-local int gz_avail OF((gz_statep));
-local int gz_look OF((gz_statep));
-local int gz_decomp OF((gz_statep));
-local int gz_fetch OF((gz_statep));
-local int gz_skip OF((gz_statep, z_off64_t));
-
-/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from
- state->fd, and update state->eof, state->err, and state->msg as appropriate.
- This function needs to loop on read(), since read() is not guaranteed to
- read the number of bytes requested, depending on the type of descriptor. */
-local int gz_load(state, buf, len, have)
- gz_statep state;
- unsigned char *buf;
- unsigned len;
- unsigned *have;
-{
- int ret;
-
- *have = 0;
- do {
- ret = read(state->fd, buf + *have, len - *have);
- if (ret <= 0)
- break;
- *have += ret;
- } while (*have < len);
- if (ret < 0) {
- gz_error(state, Z_ERRNO, zstrerror());
- return -1;
- }
- if (ret == 0)
- state->eof = 1;
- return 0;
-}
-
-/* Load up input buffer and set eof flag if last data loaded -- return -1 on
- error, 0 otherwise. Note that the eof flag is set when the end of the input
- file is reached, even though there may be unused data in the buffer. Once
- that data has been used, no more attempts will be made to read the file.
- If strm->avail_in != 0, then the current data is moved to the beginning of
- the input buffer, and then the remainder of the buffer is loaded with the
- available data from the input file. */
-local int gz_avail(state)
- gz_statep state;
-{
- unsigned got;
- z_streamp strm = &(state->strm);
-
- if (state->err != Z_OK && state->err != Z_BUF_ERROR)
- return -1;
- if (state->eof == 0) {
- if (strm->avail_in) { /* copy what's there to the start */
- unsigned char *p = state->in;
- unsigned const char *q = strm->next_in;
- unsigned n = strm->avail_in;
- do {
- *p++ = *q++;
- } while (--n);
- }
- if (gz_load(state, state->in + strm->avail_in,
- state->size - strm->avail_in, &got) == -1)
- return -1;
- strm->avail_in += got;
- strm->next_in = state->in;
- }
- return 0;
-}
-
-/* Look for gzip header, set up for inflate or copy. state->x.have must be 0.
- If this is the first time in, allocate required memory. state->how will be
- left unchanged if there is no more input data available, will be set to COPY
- if there is no gzip header and direct copying will be performed, or it will
- be set to GZIP for decompression. If direct copying, then leftover input
- data from the input buffer will be copied to the output buffer. In that
- case, all further file reads will be directly to either the output buffer or
- a user buffer. If decompressing, the inflate state will be initialized.
- gz_look() will return 0 on success or -1 on failure. */
-local int gz_look(state)
- gz_statep state;
-{
- z_streamp strm = &(state->strm);
-
- /* allocate read buffers and inflate memory */
- if (state->size == 0) {
- /* allocate buffers */
- state->in = (unsigned char *)malloc(state->want);
- state->out = (unsigned char *)malloc(state->want << 1);
- if (state->in == NULL || state->out == NULL) {
- if (state->out != NULL)
- free(state->out);
- if (state->in != NULL)
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- state->size = state->want;
-
- /* allocate inflate memory */
- state->strm.zalloc = Z_NULL;
- state->strm.zfree = Z_NULL;
- state->strm.opaque = Z_NULL;
- state->strm.avail_in = 0;
- state->strm.next_in = Z_NULL;
- if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) { /* gunzip */
- free(state->out);
- free(state->in);
- state->size = 0;
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- }
-
- /* get at least the magic bytes in the input buffer */
- if (strm->avail_in < 2) {
- if (gz_avail(state) == -1)
- return -1;
- if (strm->avail_in == 0)
- return 0;
- }
-
- /* look for gzip magic bytes -- if there, do gzip decoding (note: there is
- a logical dilemma here when considering the case of a partially written
- gzip file, to wit, if a single 31 byte is written, then we cannot tell
- whether this is a single-byte file, or just a partially written gzip
- file -- for here we assume that if a gzip file is being written, then
- the header will be written in a single operation, so that reading a
- single byte is sufficient indication that it is not a gzip file) */
- if (strm->avail_in > 1 &&
- strm->next_in[0] == 31 && strm->next_in[1] == 139) {
- inflateReset(strm);
- state->how = GZIP;
- state->direct = 0;
- return 0;
- }
-
- /* no gzip header -- if we were decoding gzip before, then this is trailing
- garbage. Ignore the trailing garbage and finish. */
- if (state->direct == 0) {
- strm->avail_in = 0;
- state->eof = 1;
- state->x.have = 0;
- return 0;
- }
-
- /* doing raw i/o, copy any leftover input to output -- this assumes that
- the output buffer is larger than the input buffer, which also assures
- space for gzungetc() */
- state->x.next = state->out;
- if (strm->avail_in) {
- memcpy(state->x.next, strm->next_in, strm->avail_in);
- state->x.have = strm->avail_in;
- strm->avail_in = 0;
- }
- state->how = COPY;
- state->direct = 1;
- return 0;
-}
-
-/* Decompress from input to the provided next_out and avail_out in the state.
- On return, state->x.have and state->x.next point to the just decompressed
- data. If the gzip stream completes, state->how is reset to LOOK to look for
- the next gzip stream or raw data, once state->x.have is depleted. Returns 0
- on success, -1 on failure. */
-local int gz_decomp(state)
- gz_statep state;
-{
- int ret = Z_OK;
- unsigned had;
- z_streamp strm = &(state->strm);
-
- /* fill output buffer up to end of deflate stream */
- had = strm->avail_out;
- do {
- /* get more input for inflate() */
- if (strm->avail_in == 0 && gz_avail(state) == -1)
- return -1;
- if (strm->avail_in == 0) {
- gz_error(state, Z_BUF_ERROR, "unexpected end of file");
- break;
- }
-
- /* decompress and handle errors */
- ret = inflate(strm, Z_NO_FLUSH);
- if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
- gz_error(state, Z_STREAM_ERROR,
- "internal error: inflate stream corrupt");
- return -1;
- }
- if (ret == Z_MEM_ERROR) {
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- if (ret == Z_DATA_ERROR) { /* deflate stream invalid */
- gz_error(state, Z_DATA_ERROR,
- strm->msg == NULL ? "compressed data error" : strm->msg);
- return -1;
- }
- } while (strm->avail_out && ret != Z_STREAM_END);
-
- /* update available output */
- state->x.have = had - strm->avail_out;
- state->x.next = strm->next_out - state->x.have;
-
- /* if the gzip stream completed successfully, look for another */
- if (ret == Z_STREAM_END)
- state->how = LOOK;
-
- /* good decompression */
- return 0;
-}
-
-/* Fetch data and put it in the output buffer. Assumes state->x.have is 0.
- Data is either copied from the input file or decompressed from the input
- file depending on state->how. If state->how is LOOK, then a gzip header is
- looked for to determine whether to copy or decompress. Returns -1 on error,
- otherwise 0. gz_fetch() will leave state->how as COPY or GZIP unless the
- end of the input file has been reached and all data has been processed. */
-local int gz_fetch(state)
- gz_statep state;
-{
- z_streamp strm = &(state->strm);
-
- do {
- switch(state->how) {
- case LOOK: /* -> LOOK, COPY (only if never GZIP), or GZIP */
- if (gz_look(state) == -1)
- return -1;
- if (state->how == LOOK)
- return 0;
- break;
- case COPY: /* -> COPY */
- if (gz_load(state, state->out, state->size << 1, &(state->x.have))
- == -1)
- return -1;
- state->x.next = state->out;
- return 0;
- case GZIP: /* -> GZIP or LOOK (if end of gzip stream) */
- strm->avail_out = state->size << 1;
- strm->next_out = state->out;
- if (gz_decomp(state) == -1)
- return -1;
- }
- } while (state->x.have == 0 && (!state->eof || strm->avail_in));
- return 0;
-}
-
-/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */
-local int gz_skip(state, len)
- gz_statep state;
- z_off64_t len;
-{
- unsigned n;
-
- /* skip over len bytes or reach end-of-file, whichever comes first */
- while (len)
- /* skip over whatever is in output buffer */
- if (state->x.have) {
- n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ?
- (unsigned)len : state->x.have;
- state->x.have -= n;
- state->x.next += n;
- state->x.pos += n;
- len -= n;
- }
-
- /* output buffer empty -- return if we're at the end of the input */
- else if (state->eof && state->strm.avail_in == 0)
- break;
-
- /* need more data to skip -- load up output buffer */
- else {
- /* get more output, looking for header if required */
- if (gz_fetch(state) == -1)
- return -1;
- }
- return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
- gzFile file;
- voidp buf;
- unsigned len;
-{
- unsigned got, n;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're reading and that there's no (serious) error */
- if (state->mode != GZ_READ ||
- (state->err != Z_OK && state->err != Z_BUF_ERROR))
- return -1;
-
- /* since an int is returned, make sure len fits in one, otherwise return
- with an error (this avoids the flaw in the interface) */
- if ((int)len < 0) {
- gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
- return -1;
- }
-
- /* if len is zero, avoid unnecessary operations */
- if (len == 0)
- return 0;
-
- /* process a skip request */
- if (state->seek) {
- state->seek = 0;
- if (gz_skip(state, state->skip) == -1)
- return -1;
- }
-
- /* get len bytes to buf, or less than len if at the end */
- got = 0;
- do {
- /* first just try copying data from the output buffer */
- if (state->x.have) {
- n = state->x.have > len ? len : state->x.have;
- memcpy(buf, state->x.next, n);
- state->x.next += n;
- state->x.have -= n;
- }
-
- /* output buffer empty -- return if we're at the end of the input */
- else if (state->eof && strm->avail_in == 0) {
- state->past = 1; /* tried to read past end */
- break;
- }
-
- /* need output data -- for small len or new stream load up our output
- buffer */
- else if (state->how == LOOK || len < (state->size << 1)) {
- /* get more output, looking for header if required */
- if (gz_fetch(state) == -1)
- return -1;
- continue; /* no progress yet -- go back to copy above */
- /* the copy above assures that we will leave with space in the
- output buffer, allowing at least one gzungetc() to succeed */
- }
-
- /* large len -- read directly into user buffer */
- else if (state->how == COPY) { /* read directly */
- if (gz_load(state, (unsigned char *)buf, len, &n) == -1)
- return -1;
- }
-
- /* large len -- decompress directly into user buffer */
- else { /* state->how == GZIP */
- strm->avail_out = len;
- strm->next_out = (unsigned char *)buf;
- if (gz_decomp(state) == -1)
- return -1;
- n = state->x.have;
- state->x.have = 0;
- }
-
- /* update progress */
- len -= n;
- buf = (char *)buf + n;
- got += n;
- state->x.pos += n;
- } while (len);
-
- /* return number of bytes read into user buffer (will fit in int) */
- return (int)got;
-}
-
-/* -- see zlib.h -- */
-#ifdef Z_PREFIX_SET
-# undef z_gzgetc
-#else
-# undef gzgetc
-#endif
-int ZEXPORT gzgetc(file)
- gzFile file;
-{
- int ret;
- unsigned char buf[1];
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no (serious) error */
- if (state->mode != GZ_READ ||
- (state->err != Z_OK && state->err != Z_BUF_ERROR))
- return -1;
-
- /* try output buffer (no need to check for skip request) */
- if (state->x.have) {
- state->x.have--;
- state->x.pos++;
- return *(state->x.next)++;
- }
-
- /* nothing there -- try gzread() */
- ret = gzread(file, buf, 1);
- return ret < 1 ? -1 : buf[0];
-}
-
-int ZEXPORT gzgetc_(file)
-gzFile file;
-{
- return gzgetc(file);
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzungetc(c, file)
- int c;
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no (serious) error */
- if (state->mode != GZ_READ ||
- (state->err != Z_OK && state->err != Z_BUF_ERROR))
- return -1;
-
- /* process a skip request */
- if (state->seek) {
- state->seek = 0;
- if (gz_skip(state, state->skip) == -1)
- return -1;
- }
-
- /* can't push EOF */
- if (c < 0)
- return -1;
-
- /* if output buffer empty, put byte at end (allows more pushing) */
- if (state->x.have == 0) {
- state->x.have = 1;
- state->x.next = state->out + (state->size << 1) - 1;
- state->x.next[0] = c;
- state->x.pos--;
- state->past = 0;
- return c;
- }
-
- /* if no room, give up (must have already done a gzungetc()) */
- if (state->x.have == (state->size << 1)) {
- gz_error(state, Z_DATA_ERROR, "out of room to push characters");
- return -1;
- }
-
- /* slide output data if needed and insert byte before existing data */
- if (state->x.next == state->out) {
- unsigned char *src = state->out + state->x.have;
- unsigned char *dest = state->out + (state->size << 1);
- while (src > state->out)
- *--dest = *--src;
- state->x.next = dest;
- }
- state->x.have++;
- state->x.next--;
- state->x.next[0] = c;
- state->x.pos--;
- state->past = 0;
- return c;
-}
-
-/* -- see zlib.h -- */
-char * ZEXPORT gzgets(file, buf, len)
- gzFile file;
- char *buf;
- int len;
-{
- unsigned left, n;
- char *str;
- unsigned char *eol;
- gz_statep state;
-
- /* check parameters and get internal structure */
- if (file == NULL || buf == NULL || len < 1)
- return NULL;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no (serious) error */
- if (state->mode != GZ_READ ||
- (state->err != Z_OK && state->err != Z_BUF_ERROR))
- return NULL;
-
- /* process a skip request */
- if (state->seek) {
- state->seek = 0;
- if (gz_skip(state, state->skip) == -1)
- return NULL;
- }
-
- /* copy output bytes up to new line or len - 1, whichever comes first --
- append a terminating zero to the string (we don't check for a zero in
- the contents, let the user worry about that) */
- str = buf;
- left = (unsigned)len - 1;
- if (left) do {
- /* assure that something is in the output buffer */
- if (state->x.have == 0 && gz_fetch(state) == -1)
- return NULL; /* error */
- if (state->x.have == 0) { /* end of file */
- state->past = 1; /* read past end */
- break; /* return what we have */
- }
-
- /* look for end-of-line in current output buffer */
- n = state->x.have > left ? left : state->x.have;
- eol = (unsigned char *)memchr(state->x.next, '\n', n);
- if (eol != NULL)
- n = (unsigned)(eol - state->x.next) + 1;
-
- /* copy through end-of-line, or remainder if not found */
- memcpy(buf, state->x.next, n);
- state->x.have -= n;
- state->x.next += n;
- state->x.pos += n;
- left -= n;
- buf += n;
- } while (left && eol == NULL);
-
- /* return terminated string, or if nothing, end of file */
- if (buf == str)
- return NULL;
- buf[0] = 0;
- return str;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzdirect(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
-
- /* if the state is not known, but we can find out, then do so (this is
- mainly for right after a gzopen() or gzdopen()) */
- if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
- (void)gz_look(state);
-
- /* return 1 if transparent, 0 if processing a gzip stream */
- return state->direct;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_r(file)
- gzFile file;
-{
- int ret, err;
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
-
- /* check that we're reading */
- if (state->mode != GZ_READ)
- return Z_STREAM_ERROR;
-
- /* free memory and close file */
- if (state->size) {
- inflateEnd(&(state->strm));
- free(state->out);
- free(state->in);
- }
- err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK;
- gz_error(state, Z_OK, NULL);
- free(state->path);
- ret = close(state->fd);
- free(state);
- return ret ? Z_ERRNO : err;
-}
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/gzwrite.c
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/gzwrite.c b/DocFormats/platform/3rdparty/zlib-1.2.8/gzwrite.c
deleted file mode 100644
index aa767fb..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/gzwrite.c
+++ /dev/null
@@ -1,577 +0,0 @@
-/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_init OF((gz_statep));
-local int gz_comp OF((gz_statep, int));
-local int gz_zero OF((gz_statep, z_off64_t));
-
-/* Initialize state for writing a gzip file. Mark initialization by setting
- state->size to non-zero. Return -1 on failure or 0 on success. */
-local int gz_init(state)
- gz_statep state;
-{
- int ret;
- z_streamp strm = &(state->strm);
-
- /* allocate input buffer */
- state->in = (unsigned char *)malloc(state->want);
- if (state->in == NULL) {
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
-
- /* only need output buffer and deflate state if compressing */
- if (!state->direct) {
- /* allocate output buffer */
- state->out = (unsigned char *)malloc(state->want);
- if (state->out == NULL) {
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
-
- /* allocate deflate memory, set up for gzip compression */
- strm->zalloc = Z_NULL;
- strm->zfree = Z_NULL;
- strm->opaque = Z_NULL;
- ret = deflateInit2(strm, state->level, Z_DEFLATED,
- MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
- if (ret != Z_OK) {
- free(state->out);
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- }
-
- /* mark state as initialized */
- state->size = state->want;
-
- /* initialize write buffer if compressing */
- if (!state->direct) {
- strm->avail_out = state->size;
- strm->next_out = state->out;
- state->x.next = strm->next_out;
- }
- return 0;
-}
-
-/* Compress whatever is at avail_in and next_in and write to the output file.
- Return -1 if there is an error writing to the output file, otherwise 0.
- flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH,
- then the deflate() state is reset to start a new gzip stream. If gz->direct
- is true, then simply write to the output file without compressing, and
- ignore flush. */
-local int gz_comp(state, flush)
- gz_statep state;
- int flush;
-{
- int ret, got;
- unsigned have;
- z_streamp strm = &(state->strm);
-
- /* allocate memory if this is the first time through */
- if (state->size == 0 && gz_init(state) == -1)
- return -1;
-
- /* write directly if requested */
- if (state->direct) {
- got = write(state->fd, strm->next_in, strm->avail_in);
- if (got < 0 || (unsigned)got != strm->avail_in) {
- gz_error(state, Z_ERRNO, zstrerror());
- return -1;
- }
- strm->avail_in = 0;
- return 0;
- }
-
- /* run deflate() on provided input until it produces no more output */
- ret = Z_OK;
- do {
- /* write out current buffer contents if full, or if flushing, but if
- doing Z_FINISH then don't write until we get to Z_STREAM_END */
- if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
- (flush != Z_FINISH || ret == Z_STREAM_END))) {
- have = (unsigned)(strm->next_out - state->x.next);
- if (have && ((got = write(state->fd, state->x.next, have)) < 0 ||
- (unsigned)got != have)) {
- gz_error(state, Z_ERRNO, zstrerror());
- return -1;
- }
- if (strm->avail_out == 0) {
- strm->avail_out = state->size;
- strm->next_out = state->out;
- }
- state->x.next = strm->next_out;
- }
-
- /* compress */
- have = strm->avail_out;
- ret = deflate(strm, flush);
- if (ret == Z_STREAM_ERROR) {
- gz_error(state, Z_STREAM_ERROR,
- "internal error: deflate stream corrupt");
- return -1;
- }
- have -= strm->avail_out;
- } while (have);
-
- /* if that completed a deflate stream, allow another to start */
- if (flush == Z_FINISH)
- deflateReset(strm);
-
- /* all done, no errors */
- return 0;
-}
-
-/* Compress len zeros to output. Return -1 on error, 0 on success. */
-local int gz_zero(state, len)
- gz_statep state;
- z_off64_t len;
-{
- int first;
- unsigned n;
- z_streamp strm = &(state->strm);
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return -1;
-
- /* compress len zeros (len guaranteed > 0) */
- first = 1;
- while (len) {
- n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
- (unsigned)len : state->size;
- if (first) {
- memset(state->in, 0, n);
- first = 0;
- }
- strm->avail_in = n;
- strm->next_in = state->in;
- state->x.pos += n;
- if (gz_comp(state, Z_NO_FLUSH) == -1)
- return -1;
- len -= n;
- }
- return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
- gzFile file;
- voidpc buf;
- unsigned len;
-{
- unsigned put = len;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* since an int is returned, make sure len fits in one, otherwise return
- with an error (this avoids the flaw in the interface) */
- if ((int)len < 0) {
- gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
- return 0;
- }
-
- /* if len is zero, avoid unnecessary operations */
- if (len == 0)
- return 0;
-
- /* allocate memory if this is the first time through */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* for small len, copy to input buffer, otherwise compress directly */
- if (len < state->size) {
- /* copy to input buffer, compress when full */
- do {
- unsigned have, copy;
-
- if (strm->avail_in == 0)
- strm->next_in = state->in;
- have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
- copy = state->size - have;
- if (copy > len)
- copy = len;
- memcpy(state->in + have, buf, copy);
- strm->avail_in += copy;
- state->x.pos += copy;
- buf = (const char *)buf + copy;
- len -= copy;
- if (len && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
- } while (len);
- }
- else {
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* directly compress user buffer to file */
- strm->avail_in = len;
- strm->next_in = (z_const Bytef *)buf;
- state->x.pos += len;
- if (gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
- }
-
- /* input was all buffered or compressed (put will fit in int) */
- return (int)put;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputc(file, c)
- gzFile file;
- int c;
-{
- unsigned have;
- unsigned char buf[1];
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return -1;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* try writing to input buffer for speed (state->size == 0 if buffer not
- initialized) */
- if (state->size) {
- if (strm->avail_in == 0)
- strm->next_in = state->in;
- have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
- if (have < state->size) {
- state->in[have] = c;
- strm->avail_in++;
- state->x.pos++;
- return c & 0xff;
- }
- }
-
- /* no room in buffer or not initialized, use gz_write() */
- buf[0] = c;
- if (gzwrite(file, buf, 1) != 1)
- return -1;
- return c & 0xff;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputs(file, str)
- gzFile file;
- const char *str;
-{
- int ret;
- unsigned len;
-
- /* write string */
- len = (unsigned)strlen(str);
- ret = gzwrite(file, str, len);
- return ret == 0 && len != 0 ? -1 : ret;
-}
-
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#include <stdarg.h>
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
-{
- int size, len;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* make sure we have some buffer space */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* do the printf() into the input buffer, put length in len */
- size = (int)(state->size);
- state->in[size - 1] = 0;
-#ifdef NO_vsnprintf
-# ifdef HAS_vsprintf_void
- (void)vsprintf((char *)(state->in), format, va);
- for (len = 0; len < size; len++)
- if (state->in[len] == 0) break;
-# else
- len = vsprintf((char *)(state->in), format, va);
-# endif
-#else
-# ifdef HAS_vsnprintf_void
- (void)vsnprintf((char *)(state->in), size, format, va);
- len = strlen((char *)(state->in));
-# else
- len = vsnprintf((char *)(state->in), size, format, va);
-# endif
-#endif
-
- /* check that printf() results fit in buffer */
- if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
- return 0;
-
- /* update buffer and position, defer compression until needed */
- strm->avail_in = (unsigned)len;
- strm->next_in = state->in;
- state->x.pos += len;
- return len;
-}
-
-int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
-{
- va_list va;
- int ret;
-
- va_start(va, format);
- ret = gzvprintf(file, format, va);
- va_end(va);
- return ret;
-}
-
-#else /* !STDC && !Z_HAVE_STDARG_H */
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
- gzFile file;
- const char *format;
- int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
- int size, len;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that can really pass pointer in ints */
- if (sizeof(int) != sizeof(void *))
- return 0;
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* make sure we have some buffer space */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* do the printf() into the input buffer, put length in len */
- size = (int)(state->size);
- state->in[size - 1] = 0;
-#ifdef NO_snprintf
-# ifdef HAS_sprintf_void
- sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
- for (len = 0; len < size; len++)
- if (state->in[len] == 0) break;
-# else
- len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-# endif
-#else
-# ifdef HAS_snprintf_void
- snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
- len = strlen((char *)(state->in));
-# else
- len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
- a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
- a19, a20);
-# endif
-#endif
-
- /* check that printf() results fit in buffer */
- if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
- return 0;
-
- /* update buffer and position, defer compression until needed */
- strm->avail_in = (unsigned)len;
- strm->next_in = state->in;
- state->x.pos += len;
- return len;
-}
-
-#endif
-
-/* -- see zlib.h -- */
-int ZEXPORT gzflush(file, flush)
- gzFile file;
- int flush;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return Z_STREAM_ERROR;
-
- /* check flush parameter */
- if (flush < 0 || flush > Z_FINISH)
- return Z_STREAM_ERROR;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* compress remaining data with requested flush */
- gz_comp(state, flush);
- return state->err;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzsetparams(file, level, strategy)
- gzFile file;
- int level;
- int strategy;
-{
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return Z_STREAM_ERROR;
-
- /* if no change is requested, then do nothing */
- if (level == state->level && strategy == state->strategy)
- return Z_OK;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* change compression parameters for subsequent input */
- if (state->size) {
- /* flush previous input with previous parameters before changing */
- if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
- return state->err;
- deflateParams(strm, level, strategy);
- }
- state->level = level;
- state->strategy = strategy;
- return Z_OK;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_w(file)
- gzFile file;
-{
- int ret = Z_OK;
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
-
- /* check that we're writing */
- if (state->mode != GZ_WRITE)
- return Z_STREAM_ERROR;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- ret = state->err;
- }
-
- /* flush, free memory, and close file */
- if (gz_comp(state, Z_FINISH) == -1)
- ret = state->err;
- if (state->size) {
- if (!state->direct) {
- (void)deflateEnd(&(state->strm));
- free(state->out);
- }
- free(state->in);
- }
- gz_error(state, Z_OK, NULL);
- free(state->path);
- if (close(state->fd) == -1)
- ret = Z_ERRNO;
- free(state);
- return ret;
-}