You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@perl.apache.org by MG...@imbank.ru on 2004/10/05 12:30:36 UTC
[mp2] NetBSD-2.0_RC1 httpd-2.0.52 modperl-1.99_17-dev configure error
MGorbunov@imbank.ru wrote on 29.09.2004 18:21:47:
> NetBSD-2.0_RC1 + perl-5.8.5 + httpd-2.0.52 :
>
> all the above builds and runs OK, but
>
> when trying to configure source of modperl-1.99_17-dev I get the
> following:
>
> $ perl Makefile.PL MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
> Reading Makefile.PL args from @ARGV
> MP_AP_PREFIX = /home/mgorb/mp-test/httpd-2.0
> [ error] invalid MP_AP_PREFIX: include/ directory not found in
> /home/mgorb/mp-test/httpd-2.0
>
> $ ls /home/mgorb/mp-test/httpd-2.0
> bin cgi-bin error icons lib man modules
> build conf htdocs include logs manual
>
> $ uname -a
> NetBSD K133 2.0_RC1 NetBSD 2.0_RC1 (GENERIC) #0: Mon Sep 27 11:29:30 UTC
> 2004
> autobuild@tgm.netbsd.org:
>
/autobuild/netbsd-2-0/i386/OBJ/autobuild/netbsd-2-0/src/sys/arch/i386/compile/GENERIC
> i386
>
> $ perl -V
> Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
> Platform:
> osname=netbsd, osvers=2.0_rc1, archname=i386-netbsd
> uname='netbsd k133 2.0_rc1 netbsd 2.0_rc1 (generic) #0: mon sep 27
> 11:29:30 utc 2004
> autobuild@tgm.netbsd.org:
>
autobuildnetbsd-2-0i386objautobuildnetbsd-2-0srcsysarchi386compilegeneric
> i386 '
> config_args='-Dprefix=/home/mgorb/mp-test/perl
> -Doptimize=-mcpu=pentium2 -march=pentium2 -O2 -des'
> hint=recommended, useposix=true, d_sigaction=define
> usethreads=undef use5005threads=undef useithreads=undef
> usemultiplicity=undef
> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
> use64bitint=undef use64bitall=undef uselongdouble=undef
> usemymalloc=y, bincompat5005=undef
> Compiler:
> cc='cc', ccflags ='-fno-strict-aliasing -pipe',
> optimize='-mcpu=pentium2 -march=pentium2 -O2',
> cppflags='-fno-strict-aliasing -pipe'
> ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)',
> gccosandvers=''
> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
> ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
> lseeksize=8
> alignbytes=4, prototype=define
> Linker and Libraries:
> ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib
-Wl,-rpath,/usr/local/lib'
> libpth=/lib /usr/lib
> libs=-lm -lcrypt -lutil -lc -lposix
> perllibs=-lm -lcrypt -lutil -lc -lposix
> libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
> gnulibc_version=''
> Dynamic Linking:
> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
> cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared '
>
>
> Characteristics of this binary (from libperl):
> Compile-time options: USE_LARGE_FILES
> Built under netbsd
> Compiled at Sep 29 2004 14:36:57
> @INC:
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd
> /home/mgorb/mp-test/perl/lib/5.8.5
> /home/mgorb/mp-test/perl/lib/site_perl/5.8.5/i386-netbsd
> /home/mgorb/mp-test/perl/lib/site_perl/5.8.5
> /home/mgorb/mp-test/perl/lib/site_perl
> .
> $
>
> httpd's configure string: --prefix=$HOME/mp-test/httpd-2.0
>
> --
Stas Bekman <st...@stason.org> wrote on 01.10.2004 06:08:34:
> MGorbunov@imbank.ru wrote:
> > NetBSD-2.0_RC1 + perl-5.8.5 + httpd-2.0.52 :
> >
> > all the above builds and runs OK, but
> >
> > when trying to configure source of modperl-1.99_17-dev I get the
> > following:
> >
> > $ perl Makefile.PL MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
> > Reading Makefile.PL args from @ARGV
> > MP_AP_PREFIX = /home/mgorb/mp-test/httpd-2.0
> > [ error] invalid MP_AP_PREFIX: include/ directory not found in
> > /home/mgorb/mp-test/httpd-2.0
> >
> > $ ls /home/mgorb/mp-test/httpd-2.0
> > bin cgi-bin error icons lib man modules
> > build conf htdocs include logs manual
>
> I can't reproduce that. Could you please try to debug that code? It's
just
> perl in Makefile.PL.
>
> Also I suspect that it might something to do with the fact that you have
> httpd-2.0 as a sub-dir of modperl-2.0? But I can't tell where the
> modperl-2.0 source lives from your report. So it's just an idea.
>
>
> --
> __________________________________________________________________
> Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
> http://stason.org/ mod_perl Guide ---> http://perl.apache.org
> mailto:stas@stason.org http://use.perl.org http://apacheweek.com
> http://modperlbook.org http://apache.org http://ticketmaster.com
>
> --
> Report problems: http://perl.apache.org/bugs/
> Mail list info: http://perl.apache.org/maillist/modperl.html
> List etiquette: http://perl.apache.org/maillist/email-etiquette.html
>
MGorbunov@imbank.ru wrote on 01.10.2004 15:28:45:
> Stas Bekman <st...@stason.org> wrote on 01.10.2004 06:08:34:
> > I can't reproduce that. Could you please try to debug that code? It's
> just
> > perl in Makefile.PL.
>
> tried that with perl -d Makefile.PL MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
>
> looks like it stops here:
>
> 171: unless ($val) {
> DB<129> s
> Apache::Build::apxs(lib/Apache/Build.pm:173):
> 173: my $error = qx($apxs @_ 2>&1);
> DB<131> s
> Can't exec "/home/mgorb/mp-test/httpd-2.0/bin/apxs": No such file or
> directory at lib/Apache/Build.pm line 173.
> at lib/Apache/Build.pm line 173
> Apache::Build::apxs('Apache::Build=HASH(0x8d7fcb8)', '-q',
> 'INCLUDEDIR') called at lib/Apache/Build.pm line 82
> Apache::Build::ap_prefix_invalid('Apache::Build=HASH(0x8d7fcb8)')
> called at Makefile.PL line 206
> main::configure() called at Makefile.PL line 52
>
> ...
>
> looking into /home/mgorb/mp-test/httpd-2.0/bin/apxs ( which appeared to
be
> a perl script :) ) showed "#!/replace/with/path/to/perl/interpreter -w"
at
> the first line. Replaced it with "/usr/local/bin/perl". After that "perl
> Makefile.PL" worked and mp2 was built OK, but some tests failed:
>
> Failed Test Stat Wstat Total Fail Failed List of Failed
>
-------------------------------------------------------------------------------
> t/apr-ext/base64.t 255 65280 ?? ?? % ??
> t/apr-ext/bucket.t 255 65280 ?? ?? % ??
> t/apr-ext/date.t 255 65280 ?? ?? % ??
> t/apr-ext/finfo.t 255 65280 ?? ?? % ??
> t/apr-ext/perlio.t 255 65280 ?? ?? % ??
> t/apr-ext/pool.t 255 65280 ?? ?? % ??
> t/apr-ext/string.t 255 65280 ?? ?? % ??
> t/apr-ext/table.t 255 65280 ?? ?? % ??
> t/apr-ext/threadmutex.t 255 65280 ?? ?? % ??
> t/apr-ext/uri.t 255 65280 ?? ?? % ??
> t/apr-ext/util.t 255 65280 ?? ?? % ??
> t/apr-ext/uuid.t 255 65280 ?? ?? % ??
> t/apr/constants.t 255 65280 ?? ?? % ??
>
> % make test TEST_VERBOSE=1 TEST_FILES="t/apr-ext/base64.t
> t/apr-ext/bucket.t t/apr-ext/date.t t/apr-ext/finfo.t t/apr-ext/perlio.t
> t/apr-ext/pool.t t/apr-ext/string.t t/apr-ext/table.t
> t/apr-ext/threadmutex.t t/apr-ext/uri.t t/apr-ext/util.t
t/apr-ext/uuid.t
> t/apr/constants.t"
> cd "src/modules/perl" && make
> /usr/local/bin/perl -Iblib/arch -Iblib/lib t/TEST -clean
> APACHE_TEST_GROUP= APACHE_TEST_HTTPD= APACHE_TEST_PORT=
APACHE_TEST_USER=
> APACHE_TEST_APXS= /usr/local/bin/perl -Iblib/arch -Iblib/lib t/TEST
> -bugreport -verbose=1 t/apr-ext/base64.t t/apr-ext/bucket.t
> t/apr-ext/date.t t/apr-ext/finfo.t t/apr-ext/perlio.t t/apr-ext/pool.t
> t/apr-ext/string.t t/apr-ext/table.t t/apr-ext/threadmutex.t
> t/apr-ext/uri.t t/apr-ext/util.t t/apr-ext/uuid.t t/apr/constants.t
> /home/mgorb/mp-test/httpd-2.0/bin/httpd -d
> /usr/home/mgorb/mp-test/src/modperl-2.0/t -f
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/conf/httpd.conf -D APACHE2
> using Apache/2.0.52 (prefork MPM)
>
> ...
>
> t/apr-ext/base64.........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Base64.pm line
23
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Base64.pm line 23.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Base64.pm line 23.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/base64.pm line
> 11.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/base64.pm line
> 11.
> Compilation failed in require at t/apr-ext/base64.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/base64.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/bucket.........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Bucket.pm line
23
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Bucket.pm line 23.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Bucket.pm line 23.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/bucket.pm line
> 11.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/bucket.pm line
> 11.
> Compilation failed in require at t/apr-ext/bucket.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/bucket.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/date...........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Date.pm line 23
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Date.pm line 23.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Date.pm line 23.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/date.pm line
11.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/date.pm line
11.
> Compilation failed in require at t/apr-ext/date.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/date.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/finfo..........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Finfo.pm line
23
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Finfo.pm line 23.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Finfo.pm line 23.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/finfo.pm line
14.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/finfo.pm line
14.
> Compilation failed in require at t/apr-ext/finfo.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/finfo.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/perlio.........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at t/apr-ext/perlio.t line 35
> Compilation failed in require at t/apr-ext/perlio.t line 35.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/pool...........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Pool.pm line 23
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Pool.pm line 23.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Pool.pm line 23.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/pool.pm line
10.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/pool.pm line
10.
> Compilation failed in require at t/apr-ext/pool.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/pool.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/string.........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/String.pm line
23
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/String.pm line 23.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/String.pm line 23.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/string.pm line
9.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/string.pm line
9.
> Compilation failed in require at t/apr-ext/string.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/string.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/table..........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Table.pm line
23
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Table.pm line 23.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Table.pm line 23.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/table.pm line
11.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/table.pm line
11.
> Compilation failed in require at t/apr-ext/table.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/table.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/threadmutex....Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line
18
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line 18.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line 18.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/threadmutex.pm
> line 9.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/threadmutex.pm
> line 9.
> Compilation failed in require at t/apr-ext/threadmutex.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/threadmutex.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/uri............Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/URI.pm line 23
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/URI.pm line 23.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/URI.pm line 23.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/uri.pm line 11.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/uri.pm line 11.
> Compilation failed in require at t/apr-ext/uri.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/uri.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/util...........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Util.pm line 23
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Util.pm line 23.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Util.pm line 23.
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/util.pm line
11.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/util.pm line
11.
> Compilation failed in require at t/apr-ext/util.t line 5.
> BEGIN failed--compilation aborted at t/apr-ext/util.t line 5.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr-ext/uuid...........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/uuid.pm
line
> 10
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/uuid.pm line
10.
> Compilation failed in require at t/apr-ext/uuid.t line 27.
> BEGIN failed--compilation aborted at t/apr-ext/uuid.t line 27.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> t/apr/constants..........Can't load
> '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
> module APR: Shared object "libapr-0.so.9" not found at
> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line
18
> Compilation failed in require at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line 18.
> BEGIN failed--compilation aborted at
> /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line 18.
> Compilation failed in require at t/apr/constants.t line 10.
> BEGIN failed--compilation aborted at t/apr/constants.t line 10.
> dubious
> Test returned status 255 (wstat 65280, 0xff00)
> FAILED--13 test scripts could be run, alas--no output ever seen
>
> ...
>
> $ find $HOME -name APR.so
> /home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so
>
> $ find $HOME -name libapr-0.so.9
> /home/mgorb/mp-test/src/httpd-2.0.52/srclib/apr/.libs/libapr-0.so.9
> /home/mgorb/mp-test/httpd-2.0/lib/libapr-0.so.9
>
> > Also I suspect that it might something to do with the fact that you
have
>
> > httpd-2.0 as a sub-dir of modperl-2.0? But I can't tell where the
> > modperl-2.0 source lives from your report. So it's just an idea.
> >
> my directory structure for this test is :
>
> $HOME/mp-test
> $HOME/mp-test/perl <- perl is installed here
> $HOME/mp-test/httpd-2.0 <- httpd is installed here
> $HOME/mp-test/src/perl-5.8.5 <- perl source
> $HOME/mp-test/src/httpd-2.0.52 <- httpd source
> $HOME/mp-test/src/modperl-2.0 <- modperl source
>
> --
Stas Bekman <st...@stason.org> wrote on 01.10.2004 18:20:50:
> MGorbunov@imbank.ru wrote:
> > Stas Bekman <st...@stason.org> wrote on 01.10.2004 06:08:34:
> >
> >>I can't reproduce that. Could you please try to debug that code? It's
> >
> > just
> >
> >>perl in Makefile.PL.
> >
> >
> > tried that with perl -d Makefile.PL
MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
> >
> > looks like it stops here:
> >
> > 171: unless ($val) {
> > DB<129> s
> > Apache::Build::apxs(lib/Apache/Build.pm:173):
> > 173: my $error = qx($apxs @_ 2>&1);
> > DB<131> s
> > Can't exec "/home/mgorb/mp-test/httpd-2.0/bin/apxs": No such file or
> > directory at lib/Apache/Build.pm line 173.
> > at lib/Apache/Build.pm line 173
> > Apache::Build::apxs('Apache::Build=HASH(0x8d7fcb8)', '-q',
> > 'INCLUDEDIR') called at lib/Apache/Build.pm line 82
> > Apache::Build::ap_prefix_invalid('Apache::Build=HASH(0x8d7fcb8)')
> > called at Makefile.PL line 206
> > main::configure() called at Makefile.PL line 52
>
> Why doesn't it print out the error then?
>
> unless ($val) {
> # do we have an error or is it just an empty value?
> my $error = qx($apxs @_ 2>&1);
> chomp $error if defined $error;
> if ($error) {
> error "'$apxs @_' failed:";
> error $error;
> }
> else {
> $val = '';
> }
> }
>
> does anything go into $error? Please try to fix that code so that it
> clearly point out what the problem is, as soon as it happens.
>
> I think that I have an idea why does it try to use apxs (it should not,
> since there should be no bin/apxs in the fresh source tree). Try running
> 'make clean' in the /home/mgorb/mp-test/httpd-2.0 tree and try again.
>
> > ...
> >
> > looking into /home/mgorb/mp-test/httpd-2.0/bin/apxs ( which appeared
to be
> > a perl script :) ) showed "#!/replace/with/path/to/perl/interpreter
-w" at
> > the first line. Replaced it with "/usr/local/bin/perl". After that
"perl
> > Makefile.PL" worked and mp2 was built OK, but some tests failed:
>
> > % make test TEST_VERBOSE=1 TEST_FILES="t/apr-ext/base64.t
> [...]
> > t/apr-ext/base64.........Can't load
> > '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so'
for
> > module APR: Shared object "libapr-0.so.9" not found at
>
> Philippe, APR.so needs the same treatment as mod_perl.so wrt to finding
> the not-yet installed library when doing the static build. I suppose we
> didn't see the problem since we had libapr installed system-wide (svn,
> etc). I think we may need to add to release procedures a step where the
RM
> (re)moves any global libs that may affect the build.
>
> --
> __________________________________________________________________
> Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
> http://stason.org/ mod_perl Guide ---> http://perl.apache.org
> mailto:stas@stason.org http://use.perl.org http://apacheweek.com
> http://modperlbook.org http://apache.org http://ticketmaster.com
>
> --
MGorbunov@imbank.ru wrote on 04.10.2004 15:22:59:
> Stas Bekman <st...@stason.org> wrote on 01.10.2004 18:20:50:
>
> > MGorbunov@imbank.ru wrote:
> > > Stas Bekman <st...@stason.org> wrote on 01.10.2004 06:08:34:
> > >
> > >>I can't reproduce that. Could you please try to debug that code?
It's
> > >
> > > just
> > >
> > >>perl in Makefile.PL.
> > >
> > >
> > > tried that with perl -d Makefile.PL
MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
> > >
> > > looks like it stops here:
> > >
> > > 171: unless ($val) {
> > > DB<129> s
> > > Apache::Build::apxs(lib/Apache/Build.pm:173):
> > > 173: my $error = qx($apxs @_ 2>&1);
> > > DB<131> s
> > > Can't exec "/home/mgorb/mp-test/httpd-2.0/bin/apxs": No such file or
> > > directory at lib/Apache/Build.pm line 173.
> > > at lib/Apache/Build.pm line 173
> > > Apache::Build::apxs('Apache::Build=HASH(0x8d7fcb8)', '-q',
> > > 'INCLUDEDIR') called at lib/Apache/Build.pm line 82
> > > Apache::Build::ap_prefix_invalid('Apache::Build=HASH(0x8d7fcb8)')
> > > called at Makefile.PL line 206
> > > main::configure() called at Makefile.PL line 52
> >
> > Why doesn't it print out the error then?
> >
> > unless ($val) {
> > # do we have an error or is it just an empty value?
> > my $error = qx($apxs @_ 2>&1);
> > chomp $error if defined $error;
> > if ($error) {
> > error "'$apxs @_' failed:";
> > error $error;
> > }
> > else {
> > $val = '';
> > }
> > }
> >
> > does anything go into $error? Please try to fix that code so that it
> > clearly point out what the problem is, as soon as it happens.
>
> changed the code above like that:
>
> unless ($val) {
> # do we have an error or is it just an empty value?
> #my $error = qx($apxs @_ 2>&1);
> my $error = qx($apxs @_);
> chomp $error if defined $error;
> if ($error) {
> error "'$apxs @_' failed:";
> error $error;
>
> now it prints the error out:
>
> $ perl Makefile.PL MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
> Reading Makefile.PL args from @ARGV
> MP_AP_PREFIX = /home/mgorb/mp-test/httpd-2.0
> Can't exec "/home/mgorb/mp-test/httpd-2.0/bin/apxs": No such file or
> directory at lib/Apache/Build.pm line 174.
> [ error] invalid MP_AP_PREFIX: include/ directory not found in
> /home/mgorb/mp-test/httpd-2.0
>
>
> > I think that I have an idea why does it try to use apxs (it should
not,
> > since there should be no bin/apxs in the fresh source tree). Try
running
>
> > 'make clean' in the /home/mgorb/mp-test/httpd-2.0 tree and try again.
>
> This does not help...
> > > ...
> > >
> > > looking into /home/mgorb/mp-test/httpd-2.0/bin/apxs ( which appeared
to be
> > > a perl script :) ) showed "#!/replace/with/path/to/perl/interpreter
-w" at
> > > the first line. Replaced it with "/usr/local/bin/perl". After that
"perl
> > > Makefile.PL" worked and mp2 was built OK, but some tests failed:
> >
> > > % make test TEST_VERBOSE=1 TEST_FILES="t/apr-ext/base64.t
> > [...]
> > > t/apr-ext/base64.........Can't load
> > > '/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so'
for
> > > module APR: Shared object "libapr-0.so.9" not found at
> >
> > Philippe, APR.so needs the same treatment as mod_perl.so wrt to
finding
> > the not-yet installed library when doing the static build. I suppose
we
> > didn't see the problem since we had libapr installed system-wide (svn,
> > etc). I think we may need to add to release procedures a step where
the RM
> > (re)moves any global libs that may affect the build.
> >
> > --
> > __________________________________________________________________
> > Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
> > http://stason.org/ mod_perl Guide ---> http://perl.apache.org
> > mailto:stas@stason.org http://use.perl.org http://apacheweek.com
> > http://modperlbook.org http://apache.org http://ticketmaster.com
> >
> > --
Stas Bekman <st...@stason.org> wrote on 05.10.2004 06:48:43:
> MGorbunov@imbank.ru wrote:
>
> could you please report the initial report, including your latest
> tweaks to lib/Apache/Build.pm to the dev list [1]? I guess Philippe
still
> didn't catch up with this list's email, but he should pick it up quickly
> at the dev list. Thanks.
>
> [1] http://perl.apache.org/maillist/dev.html#Subscription_Information
>
> --
> __________________________________________________________________
> Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
> http://stason.org/ mod_perl Guide ---> http://perl.apache.org
> mailto:stas@stason.org http://use.perl.org http://apacheweek.com
> http://modperlbook.org http://apache.org http://ticketmaster.com
>
> --
> Report problems: http://perl.apache.org/bugs/
> Mail list info: http://perl.apache.org/maillist/modperl.html
> List etiquette: http://perl.apache.org/maillist/email-etiquette.html
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: [mp2] NetBSD-2.0_RC1 httpd-2.0.52 modperl-1.99_17-dev configure
error
Posted by Stas Bekman <st...@stason.org>.
[folks don't forget to crop the stuff you don't reply to. that reply had
2KB of new content and 30K of useless tail]
Philippe M. Chiasson wrote:
> And just to be clear, you configured & build httpd in
> /home/mgorb/mp-test/httpd-2.0
> or did you do that elsewhere and just installed httpd there
> (--prefix=/home/mgorb/mp-test/httpd-2.0) ?
Philippe, please see the whole thread:
http://marc.theaimsgroup.com/?t=109646796600003&r=1&w=2
--
__________________________________________________________________
Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
http://stason.org/ mod_perl Guide ---> http://perl.apache.org
mailto:stas@stason.org http://use.perl.org http://apacheweek.com
http://modperlbook.org http://apache.org http://ticketmaster.com
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: [mp2] NetBSD-2.0_RC1 httpd-2.0.52 modperl-1.99_17-dev configure error
Posted by MG...@imbank.ru.
"Philippe M. Chiasson" <go...@ectoplasm.org> wrote on 05.10.2004 21:50:11:
>
> That's a slightly misleading error message, can you try again with this
> smallish patch? (it will correctly report the include directory it
didn't
> find)
>
> And just to be clear, you configured & build httpd in
> /home/mgorb/mp-test/httpd-2.0
> or did you do that elsewhere and just installed httpd there (--
> prefix=/home/mgorb/mp-test/httpd-2.0) ?
>
> Index: lib/Apache/Build.pm
> ===================================================================
> RCS file: /home/cvs/modperl-2.0/lib/Apache/Build.pm,v
> retrieving revision 1.186
> diff -u -I$Id -r1.186 Build.pm
> --- lib/Apache/Build.pm 26 Sep 2004 07:06:23 -0000 1.186
> +++ lib/Apache/Build.pm 5 Oct 2004 17:48:16 -0000
> @@ -82,7 +82,7 @@
> my $include_dir = $self->apxs(-q => 'INCLUDEDIR');
>
> unless (-d $include_dir) {
> - return "include/ directory not found in $prefix";
> + return "$include_dir directory not found in $prefix";
> }
>
> return '';
>
>
applied the above, here is the result:
$ $HOME/mp-test/perl/bin/perl Makefile.PL \
> MP_AP_PREFIX=$HOME/mp-test/httpd-2.0 \
> MP_CCOPTS="-march=pentium2 -O2"
Reading Makefile.PL args from @ARGV
MP_AP_PREFIX = /home/mgorb/mp-test/httpd-2.0
MP_CCOPTS = -march=pentium2 -O2
[ error] invalid MP_AP_PREFIX: directory not found in
/home/mgorb/mp-test/httpd-2.0
$
httpd is build in /home/mgorb/mp-test/src/httpd-2.0.52 and installed here
/home/mgorb/mp-test/httpd-2.0
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: [mp2] NetBSD-2.0_RC1 httpd-2.0.52 modperl-1.99_17-dev configure
error
Posted by "Philippe M. Chiasson" <go...@ectoplasm.org>.
MGorbunov@imbank.ru wrote:
> MGorbunov@imbank.ru wrote on 29.09.2004 18:21:47:
>
>
>>NetBSD-2.0_RC1 + perl-5.8.5 + httpd-2.0.52 :
>>
>>all the above builds and runs OK, but
>>
>>when trying to configure source of modperl-1.99_17-dev I get the
>>following:
>>
>>$ perl Makefile.PL MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
>>Reading Makefile.PL args from @ARGV
>> MP_AP_PREFIX = /home/mgorb/mp-test/httpd-2.0
>>[ error] invalid MP_AP_PREFIX: include/ directory not found in
>>/home/mgorb/mp-test/httpd-2.0
That's a slightly misleading error message, can you try again with this
smallish patch? (it will correctly report the include directory it didn't
find)
And just to be clear, you configured & build httpd in /home/mgorb/mp-test/httpd-2.0
or did you do that elsewhere and just installed httpd there (--prefix=/home/mgorb/mp-test/httpd-2.0) ?
Index: lib/Apache/Build.pm
===================================================================
RCS file: /home/cvs/modperl-2.0/lib/Apache/Build.pm,v
retrieving revision 1.186
diff -u -I$Id -r1.186 Build.pm
--- lib/Apache/Build.pm 26 Sep 2004 07:06:23 -0000 1.186
+++ lib/Apache/Build.pm 5 Oct 2004 17:48:16 -0000
@@ -82,7 +82,7 @@
my $include_dir = $self->apxs(-q => 'INCLUDEDIR');
unless (-d $include_dir) {
- return "include/ directory not found in $prefix";
+ return "$include_dir directory not found in $prefix";
}
return '';
>>$ ls /home/mgorb/mp-test/httpd-2.0
>>bin cgi-bin error icons lib man modules
>>build conf htdocs include logs manual
>>
>>$ uname -a
>>NetBSD K133 2.0_RC1 NetBSD 2.0_RC1 (GENERIC) #0: Mon Sep 27 11:29:30 UTC
>
>
>>2004
>>autobuild@tgm.netbsd.org:
>>
>
> /autobuild/netbsd-2-0/i386/OBJ/autobuild/netbsd-2-0/src/sys/arch/i386/compile/GENERIC
>
>>i386
>>
>>$ perl -V
>>Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
>> Platform:
>> osname=netbsd, osvers=2.0_rc1, archname=i386-netbsd
>> uname='netbsd k133 2.0_rc1 netbsd 2.0_rc1 (generic) #0: mon sep 27
>>11:29:30 utc 2004
>>autobuild@tgm.netbsd.org:
>>
>
> autobuildnetbsd-2-0i386objautobuildnetbsd-2-0srcsysarchi386compilegeneric
>
>>i386 '
>> config_args='-Dprefix=/home/mgorb/mp-test/perl
>>-Doptimize=-mcpu=pentium2 -march=pentium2 -O2 -des'
>> hint=recommended, useposix=true, d_sigaction=define
>> usethreads=undef use5005threads=undef useithreads=undef
>>usemultiplicity=undef
>> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
>> use64bitint=undef use64bitall=undef uselongdouble=undef
>> usemymalloc=y, bincompat5005=undef
>> Compiler:
>> cc='cc', ccflags ='-fno-strict-aliasing -pipe',
>> optimize='-mcpu=pentium2 -march=pentium2 -O2',
>> cppflags='-fno-strict-aliasing -pipe'
>> ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)',
>>gccosandvers=''
>> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
>> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
>> ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
>>lseeksize=8
>> alignbytes=4, prototype=define
>> Linker and Libraries:
>> ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib
>
> -Wl,-rpath,/usr/local/lib'
>
>> libpth=/lib /usr/lib
>> libs=-lm -lcrypt -lutil -lc -lposix
>> perllibs=-lm -lcrypt -lutil -lc -lposix
>> libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
>> gnulibc_version=''
>> Dynamic Linking:
>> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
>> cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared '
>>
>>
>>Characteristics of this binary (from libperl):
>> Compile-time options: USE_LARGE_FILES
>> Built under netbsd
>> Compiled at Sep 29 2004 14:36:57
>> @INC:
>> /home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd
>> /home/mgorb/mp-test/perl/lib/5.8.5
>> /home/mgorb/mp-test/perl/lib/site_perl/5.8.5/i386-netbsd
>> /home/mgorb/mp-test/perl/lib/site_perl/5.8.5
>> /home/mgorb/mp-test/perl/lib/site_perl
>> .
>>$
>>
>>httpd's configure string: --prefix=$HOME/mp-test/httpd-2.0
>>
>>--
>
>
> Stas Bekman <st...@stason.org> wrote on 01.10.2004 06:08:34:
>
>
>>MGorbunov@imbank.ru wrote:
>>
>>>NetBSD-2.0_RC1 + perl-5.8.5 + httpd-2.0.52 :
>>>
>>>all the above builds and runs OK, but
>>>
>>>when trying to configure source of modperl-1.99_17-dev I get the
>>>following:
>>>
>>>$ perl Makefile.PL MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
>>>Reading Makefile.PL args from @ARGV
>>> MP_AP_PREFIX = /home/mgorb/mp-test/httpd-2.0
>>>[ error] invalid MP_AP_PREFIX: include/ directory not found in
>>>/home/mgorb/mp-test/httpd-2.0
>>>
>>>$ ls /home/mgorb/mp-test/httpd-2.0
>>>bin cgi-bin error icons lib man modules
>>>build conf htdocs include logs manual
>>
>>I can't reproduce that. Could you please try to debug that code? It's
>
> just
>
>>perl in Makefile.PL.
>>
>>Also I suspect that it might something to do with the fact that you have
>
>
>>httpd-2.0 as a sub-dir of modperl-2.0? But I can't tell where the
>>modperl-2.0 source lives from your report. So it's just an idea.
>>
>>
>>--
>>__________________________________________________________________
>>Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
>>http://stason.org/ mod_perl Guide ---> http://perl.apache.org
>>mailto:stas@stason.org http://use.perl.org http://apacheweek.com
>>http://modperlbook.org http://apache.org http://ticketmaster.com
>>
>>--
>>Report problems: http://perl.apache.org/bugs/
>>Mail list info: http://perl.apache.org/maillist/modperl.html
>>List etiquette: http://perl.apache.org/maillist/email-etiquette.html
>>
>
>
>
> MGorbunov@imbank.ru wrote on 01.10.2004 15:28:45:
>
>
>>Stas Bekman <st...@stason.org> wrote on 01.10.2004 06:08:34:
>>
>>>I can't reproduce that. Could you please try to debug that code? It's
>>
>>just
>>
>>>perl in Makefile.PL.
>>
>>tried that with perl -d Makefile.PL MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
>>
>>looks like it stops here:
>>
>>171: unless ($val) {
>> DB<129> s
>>Apache::Build::apxs(lib/Apache/Build.pm:173):
>>173: my $error = qx($apxs @_ 2>&1);
>> DB<131> s
>>Can't exec "/home/mgorb/mp-test/httpd-2.0/bin/apxs": No such file or
>>directory at lib/Apache/Build.pm line 173.
>> at lib/Apache/Build.pm line 173
>> Apache::Build::apxs('Apache::Build=HASH(0x8d7fcb8)', '-q',
>>'INCLUDEDIR') called at lib/Apache/Build.pm line 82
>>Apache::Build::ap_prefix_invalid('Apache::Build=HASH(0x8d7fcb8)')
>>called at Makefile.PL line 206
>> main::configure() called at Makefile.PL line 52
>>
>>...
>>
>>looking into /home/mgorb/mp-test/httpd-2.0/bin/apxs ( which appeared to
>
> be
>
>>a perl script :) ) showed "#!/replace/with/path/to/perl/interpreter -w"
>
> at
>
>>the first line. Replaced it with "/usr/local/bin/perl". After that "perl
>
>
>>Makefile.PL" worked and mp2 was built OK, but some tests failed:
>>
>>Failed Test Stat Wstat Total Fail Failed List of Failed
>>
>
> -------------------------------------------------------------------------------
>
>>t/apr-ext/base64.t 255 65280 ?? ?? % ??
>>t/apr-ext/bucket.t 255 65280 ?? ?? % ??
>>t/apr-ext/date.t 255 65280 ?? ?? % ??
>>t/apr-ext/finfo.t 255 65280 ?? ?? % ??
>>t/apr-ext/perlio.t 255 65280 ?? ?? % ??
>>t/apr-ext/pool.t 255 65280 ?? ?? % ??
>>t/apr-ext/string.t 255 65280 ?? ?? % ??
>>t/apr-ext/table.t 255 65280 ?? ?? % ??
>>t/apr-ext/threadmutex.t 255 65280 ?? ?? % ??
>>t/apr-ext/uri.t 255 65280 ?? ?? % ??
>>t/apr-ext/util.t 255 65280 ?? ?? % ??
>>t/apr-ext/uuid.t 255 65280 ?? ?? % ??
>>t/apr/constants.t 255 65280 ?? ?? % ??
>>
>>% make test TEST_VERBOSE=1 TEST_FILES="t/apr-ext/base64.t
>>t/apr-ext/bucket.t t/apr-ext/date.t t/apr-ext/finfo.t t/apr-ext/perlio.t
>
>
>>t/apr-ext/pool.t t/apr-ext/string.t t/apr-ext/table.t
>>t/apr-ext/threadmutex.t t/apr-ext/uri.t t/apr-ext/util.t
>
> t/apr-ext/uuid.t
>
>>t/apr/constants.t"
>>cd "src/modules/perl" && make
>>/usr/local/bin/perl -Iblib/arch -Iblib/lib t/TEST -clean
>>APACHE_TEST_GROUP= APACHE_TEST_HTTPD= APACHE_TEST_PORT=
>
> APACHE_TEST_USER=
>
>>APACHE_TEST_APXS= /usr/local/bin/perl -Iblib/arch -Iblib/lib t/TEST
>>-bugreport -verbose=1 t/apr-ext/base64.t t/apr-ext/bucket.t
>>t/apr-ext/date.t t/apr-ext/finfo.t t/apr-ext/perlio.t t/apr-ext/pool.t
>>t/apr-ext/string.t t/apr-ext/table.t t/apr-ext/threadmutex.t
>>t/apr-ext/uri.t t/apr-ext/util.t t/apr-ext/uuid.t t/apr/constants.t
>>/home/mgorb/mp-test/httpd-2.0/bin/httpd -d
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t -f
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/conf/httpd.conf -D APACHE2
>>using Apache/2.0.52 (prefork MPM)
>>
>>...
>>
>>t/apr-ext/base64.........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Base64.pm line
>
> 23
>
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Base64.pm line 23.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Base64.pm line 23.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/base64.pm line
>>11.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/base64.pm line
>>11.
>>Compilation failed in require at t/apr-ext/base64.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/base64.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/bucket.........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Bucket.pm line
>
> 23
>
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Bucket.pm line 23.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Bucket.pm line 23.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/bucket.pm line
>>11.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/bucket.pm line
>>11.
>>Compilation failed in require at t/apr-ext/bucket.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/bucket.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/date...........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Date.pm line 23
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Date.pm line 23.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Date.pm line 23.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/date.pm line
>
> 11.
>
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/date.pm line
>
> 11.
>
>>Compilation failed in require at t/apr-ext/date.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/date.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/finfo..........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Finfo.pm line
>
> 23
>
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Finfo.pm line 23.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Finfo.pm line 23.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/finfo.pm line
>
> 14.
>
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/finfo.pm line
>
> 14.
>
>>Compilation failed in require at t/apr-ext/finfo.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/finfo.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/perlio.........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at t/apr-ext/perlio.t line 35
>>Compilation failed in require at t/apr-ext/perlio.t line 35.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/pool...........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Pool.pm line 23
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Pool.pm line 23.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Pool.pm line 23.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/pool.pm line
>
> 10.
>
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/pool.pm line
>
> 10.
>
>>Compilation failed in require at t/apr-ext/pool.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/pool.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/string.........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/String.pm line
>
> 23
>
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/String.pm line 23.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/String.pm line 23.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/string.pm line
>
> 9.
>
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/string.pm line
>
> 9.
>
>>Compilation failed in require at t/apr-ext/string.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/string.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/table..........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Table.pm line
>
> 23
>
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Table.pm line 23.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Table.pm line 23.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/table.pm line
>
> 11.
>
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/table.pm line
>
> 11.
>
>>Compilation failed in require at t/apr-ext/table.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/table.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/threadmutex....Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line
>
> 18
>
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line 18.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line 18.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/threadmutex.pm
>>line 9.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/threadmutex.pm
>>line 9.
>>Compilation failed in require at t/apr-ext/threadmutex.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/threadmutex.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/uri............Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/URI.pm line 23
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/URI.pm line 23.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/URI.pm line 23.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/uri.pm line 11.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/uri.pm line 11.
>>Compilation failed in require at t/apr-ext/uri.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/uri.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/util...........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Util.pm line 23
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Util.pm line 23.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Util.pm line 23.
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/util.pm line
>
> 11.
>
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/util.pm line
>
> 11.
>
>>Compilation failed in require at t/apr-ext/util.t line 5.
>>BEGIN failed--compilation aborted at t/apr-ext/util.t line 5.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr-ext/uuid...........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/uuid.pm
>
> line
>
>>10
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/t/lib/TestAPRlib/uuid.pm line
>
> 10.
>
>>Compilation failed in require at t/apr-ext/uuid.t line 27.
>>BEGIN failed--compilation aborted at t/apr-ext/uuid.t line 27.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>t/apr/constants..........Can't load
>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so' for
>>module APR: Shared object "libapr-0.so.9" not found at
>>/home/mgorb/mp-test/perl/lib/5.8.5/i386-netbsd/DynaLoader.pm line 230.
>> at /usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line
>
> 18
>
>>Compilation failed in require at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line 18.
>>BEGIN failed--compilation aborted at
>>/usr/home/mgorb/mp-test/src/modperl-2.0/blib/lib/APR/Const.pm line 18.
>>Compilation failed in require at t/apr/constants.t line 10.
>>BEGIN failed--compilation aborted at t/apr/constants.t line 10.
>>dubious
>> Test returned status 255 (wstat 65280, 0xff00)
>>FAILED--13 test scripts could be run, alas--no output ever seen
>>
>>...
>>
>>$ find $HOME -name APR.so
>>/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so
>>
>>$ find $HOME -name libapr-0.so.9
>>/home/mgorb/mp-test/src/httpd-2.0.52/srclib/apr/.libs/libapr-0.so.9
>>/home/mgorb/mp-test/httpd-2.0/lib/libapr-0.so.9
>>
>>
>>>Also I suspect that it might something to do with the fact that you
>
> have
>
>>>httpd-2.0 as a sub-dir of modperl-2.0? But I can't tell where the
>>>modperl-2.0 source lives from your report. So it's just an idea.
>>>
>>
>>my directory structure for this test is :
>>
>>$HOME/mp-test
>>$HOME/mp-test/perl <- perl is installed here
>>$HOME/mp-test/httpd-2.0 <- httpd is installed here
>>$HOME/mp-test/src/perl-5.8.5 <- perl source
>>$HOME/mp-test/src/httpd-2.0.52 <- httpd source
>>$HOME/mp-test/src/modperl-2.0 <- modperl source
>>
>>--
>
>
>
> Stas Bekman <st...@stason.org> wrote on 01.10.2004 18:20:50:
>
>
>>MGorbunov@imbank.ru wrote:
>>
>>>Stas Bekman <st...@stason.org> wrote on 01.10.2004 06:08:34:
>>>
>>>
>>>>I can't reproduce that. Could you please try to debug that code? It's
>>>
>>>just
>>>
>>>
>>>>perl in Makefile.PL.
>>>
>>>
>>>tried that with perl -d Makefile.PL
>
> MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
>
>>>looks like it stops here:
>>>
>>>171: unless ($val) {
>>> DB<129> s
>>>Apache::Build::apxs(lib/Apache/Build.pm:173):
>>>173: my $error = qx($apxs @_ 2>&1);
>>> DB<131> s
>>>Can't exec "/home/mgorb/mp-test/httpd-2.0/bin/apxs": No such file or
>>>directory at lib/Apache/Build.pm line 173.
>>> at lib/Apache/Build.pm line 173
>>> Apache::Build::apxs('Apache::Build=HASH(0x8d7fcb8)', '-q',
>>>'INCLUDEDIR') called at lib/Apache/Build.pm line 82
>>>Apache::Build::ap_prefix_invalid('Apache::Build=HASH(0x8d7fcb8)')
>>>called at Makefile.PL line 206
>>> main::configure() called at Makefile.PL line 52
>>
>>Why doesn't it print out the error then?
>>
>> unless ($val) {
>> # do we have an error or is it just an empty value?
>> my $error = qx($apxs @_ 2>&1);
>> chomp $error if defined $error;
>> if ($error) {
>> error "'$apxs @_' failed:";
>> error $error;
>> }
>> else {
>> $val = '';
>> }
>> }
>>
>>does anything go into $error? Please try to fix that code so that it
>>clearly point out what the problem is, as soon as it happens.
>>
>>I think that I have an idea why does it try to use apxs (it should not,
>>since there should be no bin/apxs in the fresh source tree). Try running
>
>
>>'make clean' in the /home/mgorb/mp-test/httpd-2.0 tree and try again.
>>
>>
>>>...
>>>
>>>looking into /home/mgorb/mp-test/httpd-2.0/bin/apxs ( which appeared
>
> to be
>
>>>a perl script :) ) showed "#!/replace/with/path/to/perl/interpreter
>
> -w" at
>
>>>the first line. Replaced it with "/usr/local/bin/perl". After that
>
> "perl
>
>>>Makefile.PL" worked and mp2 was built OK, but some tests failed:
>>
>>>% make test TEST_VERBOSE=1 TEST_FILES="t/apr-ext/base64.t
>>
>>[...]
>>
>>>t/apr-ext/base64.........Can't load
>>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so'
>
> for
>
>>>module APR: Shared object "libapr-0.so.9" not found at
>>
>>Philippe, APR.so needs the same treatment as mod_perl.so wrt to finding
>>the not-yet installed library when doing the static build. I suppose we
>>didn't see the problem since we had libapr installed system-wide (svn,
>>etc). I think we may need to add to release procedures a step where the
>
> RM
>
>>(re)moves any global libs that may affect the build.
>>
>>--
>>__________________________________________________________________
>>Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
>>http://stason.org/ mod_perl Guide ---> http://perl.apache.org
>>mailto:stas@stason.org http://use.perl.org http://apacheweek.com
>>http://modperlbook.org http://apache.org http://ticketmaster.com
>>
>>--
>
>
> MGorbunov@imbank.ru wrote on 04.10.2004 15:22:59:
>
>
>>Stas Bekman <st...@stason.org> wrote on 01.10.2004 18:20:50:
>>
>>
>>>MGorbunov@imbank.ru wrote:
>>>
>>>>Stas Bekman <st...@stason.org> wrote on 01.10.2004 06:08:34:
>>>>
>>>>
>>>>>I can't reproduce that. Could you please try to debug that code?
>
> It's
>
>>>>just
>>>>
>>>>
>>>>>perl in Makefile.PL.
>>>>
>>>>
>>>>tried that with perl -d Makefile.PL
>
> MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
>
>>>>looks like it stops here:
>>>>
>>>>171: unless ($val) {
>>>> DB<129> s
>>>>Apache::Build::apxs(lib/Apache/Build.pm:173):
>>>>173: my $error = qx($apxs @_ 2>&1);
>>>> DB<131> s
>>>>Can't exec "/home/mgorb/mp-test/httpd-2.0/bin/apxs": No such file or
>
>
>>>>directory at lib/Apache/Build.pm line 173.
>>>> at lib/Apache/Build.pm line 173
>>>> Apache::Build::apxs('Apache::Build=HASH(0x8d7fcb8)', '-q',
>>>>'INCLUDEDIR') called at lib/Apache/Build.pm line 82
>>>>Apache::Build::ap_prefix_invalid('Apache::Build=HASH(0x8d7fcb8)')
>>>>called at Makefile.PL line 206
>>>> main::configure() called at Makefile.PL line 52
>>>
>>>Why doesn't it print out the error then?
>>>
>>> unless ($val) {
>>> # do we have an error or is it just an empty value?
>>> my $error = qx($apxs @_ 2>&1);
>>> chomp $error if defined $error;
>>> if ($error) {
>>> error "'$apxs @_' failed:";
>>> error $error;
>>> }
>>> else {
>>> $val = '';
>>> }
>>> }
>>>
>>>does anything go into $error? Please try to fix that code so that it
>>>clearly point out what the problem is, as soon as it happens.
>>
>>changed the code above like that:
>>
>>unless ($val) {
>> # do we have an error or is it just an empty value?
>> #my $error = qx($apxs @_ 2>&1);
>> my $error = qx($apxs @_);
>> chomp $error if defined $error;
>> if ($error) {
>> error "'$apxs @_' failed:";
>> error $error;
>>
>>now it prints the error out:
>>
>>$ perl Makefile.PL MP_AP_PREFIX=$HOME/mp-test/httpd-2.0
>>Reading Makefile.PL args from @ARGV
>> MP_AP_PREFIX = /home/mgorb/mp-test/httpd-2.0
>>Can't exec "/home/mgorb/mp-test/httpd-2.0/bin/apxs": No such file or
>>directory at lib/Apache/Build.pm line 174.
>>[ error] invalid MP_AP_PREFIX: include/ directory not found in
>>/home/mgorb/mp-test/httpd-2.0
>>
>>
>>
>>>I think that I have an idea why does it try to use apxs (it should
>
> not,
>
>>>since there should be no bin/apxs in the fresh source tree). Try
>
> running
>
>>>'make clean' in the /home/mgorb/mp-test/httpd-2.0 tree and try again.
>>
>>This does not help...
>>
>>>>...
>>>>
>>>>looking into /home/mgorb/mp-test/httpd-2.0/bin/apxs ( which appeared
>
> to be
>
>>>>a perl script :) ) showed "#!/replace/with/path/to/perl/interpreter
>
> -w" at
>
>>>>the first line. Replaced it with "/usr/local/bin/perl". After that
>
> "perl
>
>>>>Makefile.PL" worked and mp2 was built OK, but some tests failed:
>>>
>>>>% make test TEST_VERBOSE=1 TEST_FILES="t/apr-ext/base64.t
>>>
>>>[...]
>>>
>>>>t/apr-ext/base64.........Can't load
>>>>'/usr/home/mgorb/mp-test/src/modperl-2.0/blib/arch/auto/APR/APR.so'
>
> for
>
>>>>module APR: Shared object "libapr-0.so.9" not found at
>>>
>>>Philippe, APR.so needs the same treatment as mod_perl.so wrt to
>
> finding
>
>>>the not-yet installed library when doing the static build. I suppose
>
> we
>
>>>didn't see the problem since we had libapr installed system-wide (svn,
>
>
>>>etc). I think we may need to add to release procedures a step where
>
> the RM
>
>>>(re)moves any global libs that may affect the build.
>>>
>>>--
>>>__________________________________________________________________
>>>Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
>>>http://stason.org/ mod_perl Guide ---> http://perl.apache.org
>>>mailto:stas@stason.org http://use.perl.org http://apacheweek.com
>>>http://modperlbook.org http://apache.org http://ticketmaster.com
>>>
>>>--
>
>
> Stas Bekman <st...@stason.org> wrote on 05.10.2004 06:48:43:
>
>
>>MGorbunov@imbank.ru wrote:
>>
>>could you please report the initial report, including your latest
>>tweaks to lib/Apache/Build.pm to the dev list [1]? I guess Philippe
>
> still
>
>>didn't catch up with this list's email, but he should pick it up quickly
>
>
>>at the dev list. Thanks.
>>
>>[1] http://perl.apache.org/maillist/dev.html#Subscription_Information
>>
>>--
>>__________________________________________________________________
>>Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
>>http://stason.org/ mod_perl Guide ---> http://perl.apache.org
>>mailto:stas@stason.org http://use.perl.org http://apacheweek.com
>>http://modperlbook.org http://apache.org http://ticketmaster.com
>>
>>--
>>Report problems: http://perl.apache.org/bugs/
>>Mail list info: http://perl.apache.org/maillist/modperl.html
>>List etiquette: http://perl.apache.org/maillist/email-etiquette.html
>>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
> For additional commands, e-mail: dev-help@perl.apache.org
>
>
--
--------------------------------------------------------------------------------
Philippe M. Chiasson m/gozer\@(apache|cpan|ectoplasm)\.org/ GPG KeyID : 88C3A5A5
http://gozer.ectoplasm.org/ F9BF E0C2 480E 7680 1AE5 3631 CB32 A107 88C3A5A5
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org