[GitHub] csantanapr commented on a change in pull request #205: Add the installation instruction to 0.9.0 release

[GitBox <gi...@apache.org>]

csantanapr commented on a change in pull request #205: Add the installation instruction to 0.9.0 release
URL: https://github.com/apache/incubator-openwhisk-release/pull/205#discussion_r197931258
 
 

 ##########
 File path: releases/0.9.0-incubating/INSTALL.md
 ##########
 @@ -0,0 +1,188 @@
+<!--
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+-->
+
+# Download OpenWhisk
+
+The source code of OpenWhisk can be accessed by [this link](https://dist.apache.org/repos/dist/dev/incubator/openwhisk/apache-openwhisk-0.9.0-incubating-rc1/).
+You are currently releasing the version 0.9.0, and the artifact of OpenWhisk source code is called "openwhisk-0.9.0-incubating-sources.tar.gz".
+
+
+# Verify the Apache license header of OpenWhisk
+
+OpenWhisk uses a tool called openwhisk-utilities to check the license header of each source code file. Please check the
+tutorial [here](https://github.com/apache/incubator-openwhisk-utilities) about how to run it on the directory level.
+
+
+# Verify the MD5 & SHA-512 checksums, and signature
+
+You need to install gpg on your local machine.
+
+For Ubuntu user, run the following command:
+
+```
+$ sudo apt-get install gnupg
+```
+
+For Mac user, run the following command:
+
+```
+$ brew install gpg
+```
+
+The public key used to verify the checksums can be found [here](https://dist.apache.org/repos/dist/dev/incubator/openwhisk/KEYS). After
+download it, you need to import it on your local machine. 
+
+```
+$ gpg --import <key_file>
+```
+
+The parameter <key_file> is the file, where the public key is saved.
+
+
+To generate the MD5 checksum:
+
+```
+$ gpg --print-md MD5 <artifact>
+```
+
+The parameter <artifact> is the file of the artifact "openwhisk-0.9.0-incubating-sources.tar.gz". Compare the content with the [MD5 file](https://dist.apache.org/repos/dist/dev/incubator/openwhisk/apache-openwhisk-0.9.0-incubating-rc1/openwhisk-0.9.0-incubating-sources.tar.gz.md5).
+
+
+To generate the SHA512 checksum:
+
+```
+$ gpg --print-md SHA512 <artifact>
+```
+
+The parameter <artifact> is the file of the artifact "openwhisk-0.9.0-incubating-sources.tar.gz". Compare the content with the [SHA512 file](https://dist.apache.org/repos/dist/dev/incubator/openwhisk/apache-openwhisk-0.9.0-incubating-rc1/openwhisk-0.9.0-incubating-sources.tar.gz.sha512).
+
+Download the [signature](https://dist.apache.org/repos/dist/dev/incubator/openwhisk/apache-openwhisk-0.9.0-incubating-rc1/openwhisk-0.9.0-incubating-sources.tar.gz.asc), and verify it with the command:
+
+```
+$ gpg --verify openwhisk-0.9.0-incubating-sources.tar.gz.asc openwhisk-0.9.0-incubating-sources.tar.gz
+```
+
+
+# Installation of OpenWhisk 0.9.0
+
+This instruction walks you through the steps to install OpenWhisk 0.9.0. We support both Ubuntu and Mac operating systems.
+Please download the source code package of OpenWhisk "openwhisk-0.9.0-incubating-sources.tar.gz" and unzip it, then you
+get a directory called "incubator-openwhisk" on your local machine.
+
+
+## Prerequisites
+
+If you are a Ubuntu user, our suggested version is between 14.04 and 16.04. Open a terminal, go to the directory of "incubator-openwhisk",
+and run the script "all.sh" under tools//ubuntu-setup:
+
+```
+$ cd incubator-openwhisk
+$ ./tools/ubuntu-setup/all.sh
+```
+
+Then, you need to add the permission for the current Ubuntu user in Docker:
+
+```
+$ sudo usermod -a -G docker $USER
+```
+
+If you are a Mac user, please run the following script:
+
+```
+echo '
+# install homebrew
+/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+# install cask
+brew tap caskroom/cask
+# install for finding alternative versions (java8)
+brew tap caskroom/versions
+# install java 8
+brew cask install java8
+# install scala
+brew install scala
+# install pip
+sudo easy_install pip
+# install script prerequisites
+sudo -H pip install docker==2.2.1 ansible==2.5.2 jinja2==2.9.6 couchdb==1.1 httplib2==0.9.2 requests==2.10.0' | bash
+```
+
+Then, activate docker0 network with the following command:
+
+```
+$ sudo ifconfig lo0 alias 172.17.0.1/24
+```
+
+After running the script above, you should have all you need to install OpenWhisk. Normally there should be no error, but it
+some error messages pop-up, please [log an issue](https://github.com/apache/incubator-openwhisk/issues) for OpenWhisk community.
+
+
+## Build the source code
+
+Stay under the directory of incubator-openwhisk, and run the following gradlew command to build the source code:
+
+```
+$ ./gradlew distDocker
+```
+
+You should be able to have all the docker images necessary to run OpenWhisk, after running this command. If you fail to build
+it, first make sure docker is running correctly by verifying with the command "docker images". If the error message still
+remains clueless, please [log an issue](https://github.com/apache/incubator-openwhisk/issues) for OpenWhisk community.
+
+
+## Deploy OpenWhisk
+
+Stay under the directory of incubator-openwhisk, and run the following ansible scripts one by one:
+
+```
+$ ansible-playbook -i environments/local setup.yml
+$ ansible-playbook -i environments/local prereq.yml
+$ ansible-playbook -i environments/local couchdb.yml
+$ ansible-playbook -i environments/local initdb.yml
+$ ansible-playbook -i environments/local wipe.yml
+$ ansible-playbook -i environments/local apigateway.yml
+$ ansible-playbook -i environments/local openwhisk.yml
+$ ansible-playbook -i environments/local postdeploy.yml
+```
+
+Normally, the ansible scripts will be executed without error. One known issue we have can be found at [this link](https://github.com/apache/incubator-openwhisk/issues/3804), you
+can try to run the script "ansible-playbook -i environments/local routemgmt.yml" to see if it can succeed. If you fail to
+deploy OpenWhisk, please [log an issue](https://github.com/apache/incubator-openwhisk/issues) for OpenWhisk community.
+
+
+## Run OpenWhisk
+
+The easiest way to try out OpenWhisk is to use OpenWhisk CLI. Please find the configuration [here](https://github.com/apache/incubator-openwhisk/blob/master/docs/cli.md).
+After that, run the following command to each an input message:
+
 
 Review comment:
   Give an example
   ```
   wsk property set --apihost 172.17.0.1 --auth $(cat ${OPENWHISK_HOME}/ansible/files/auth.guest)
   ```

----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on GitHub and use the
URL above to go to the specific comment.
 
For queries about this service, please contact Infrastructure at:
users@infra.apache.org


With regards,
Apache Git Services