You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@iceberg.apache.org by Fokko Driesprong <fo...@apache.org> on 2025/09/02 14:54:26 UTC

[VOTE] Release Apache PyIceberg 0.10.0rc3

Hi Everyone,

With great excitement I propose that we release the following RC as the
official PyIceberg 0.10.0 release.

A summary of the high level features:

   - Initial V3 support (read-only): Initial-defaults, UnknownType, Reading
   Deletion Vectors
   - Introduction of the AuthManager with various implementations
   - First TableMaintenance feature: Expire Snapshots
   - Replace Arrow partition transforms with Iceberg-Rust
   - Support for ADLS
   - Fixed a lot of bugs and improvements: UUID support, Imported Hive
   tables, Avro Gzip compression, reduced upsert memory pressure, several
   performance optimizations around metadata tables, parallel add-files
   operation, and much more!

Big shout out to the community for working on this, and joining the
discussion on Slack, GitHub and the dev-list!

The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f

   - This corresponds to the tag: pyiceberg-0.10.0rc3
   (151be021d7d20cafdd03560c4c5398d51c54551c)
   -
   https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
   -
   https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f

The release tarball, signature, and checksums are here:

   - https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/

You can find the KEYS file here:

   - https://downloads.apache.org/iceberg/KEYS

Convenience binary artifacts are staged on pypi:

   - https://pypi.org/project/pyiceberg/0.10.0rc3/

And can be installed using: pip3 install pyiceberg==0.10.0rc3

Instructions for verifying a release can be found here:

   - https://py.iceberg.apache.org/verify-release/

Please download, verify, and test.

Please vote in the next 72 hours.
[ ] +1 Release this as PyIceberg 0.10.0
[ ] +0
[ ] -1 Do not release this because...

Kind regards,
Fokko

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Kevin Liu <ke...@apache.org>.
+1 (non-binding)

[x] Download links are valid.
[x] Checksums and signatures.
[x] LICENSE/NOTICE files exist
[x] No unexpected binary files
[x] All source files have ASF headers
[x] Can compile from source
[x] Built and tested from source

Thanks (one more time) for running the release, Fokko! Very excited to see
this finally come through.

Best,
Kevin Liu

On Tue, Sep 2, 2025 at 7:54 AM Fokko Driesprong <fo...@apache.org> wrote:

> Hi Everyone,
>
> With great excitement I propose that we release the following RC as the
> official PyIceberg 0.10.0 release.
>
> A summary of the high level features:
>
>    - Initial V3 support (read-only): Initial-defaults, UnknownType,
>    Reading Deletion Vectors
>    - Introduction of the AuthManager with various implementations
>    - First TableMaintenance feature: Expire Snapshots
>    - Replace Arrow partition transforms with Iceberg-Rust
>    - Support for ADLS
>    - Fixed a lot of bugs and improvements: UUID support, Imported Hive
>    tables, Avro Gzip compression, reduced upsert memory pressure, several
>    performance optimizations around metadata tables, parallel add-files
>    operation, and much more!
>
> Big shout out to the community for working on this, and joining the
> discussion on Slack, GitHub and the dev-list!
>
> The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
>
>    - This corresponds to the tag: pyiceberg-0.10.0rc3
>    (151be021d7d20cafdd03560c4c5398d51c54551c)
>    -
>    https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
>    -
>    https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
>
> The release tarball, signature, and checksums are here:
>
>    - https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
>
> You can find the KEYS file here:
>
>    - https://downloads.apache.org/iceberg/KEYS
>
> Convenience binary artifacts are staged on pypi:
>
>    - https://pypi.org/project/pyiceberg/0.10.0rc3/
>
> And can be installed using: pip3 install pyiceberg==0.10.0rc3
>
> Instructions for verifying a release can be found here:
>
>    - https://py.iceberg.apache.org/verify-release/
>
> Please download, verify, and test.
>
> Please vote in the next 72 hours.
> [ ] +1 Release this as PyIceberg 0.10.0
> [ ] +0
> [ ] -1 Do not release this because...
>
> Kind regards,
> Fokko
>

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Fokko Driesprong <fo...@apache.org>.
Thanks everyone, the vote has been passed with 3 binding votes, and 5
non-binding votes. Thanks everyone for checking the release and I'll
release 1.10.

Kind regards,
Fokko

Op wo 10 sep 2025 om 14:30 schreef Sung Yun <su...@apache.org>:

> +1 (non-binding)
>
> Thank you Fokko!
>
> - Verified signatures, checksums
> - Verified license documentation
> - Installed and tested from source distribution using Python 3.12
>
> Sung
>
> On 2025/09/09 21:56:39 "Honah J." wrote:
> > +1 (binding)
> >
> > - Verified signature/checksum/license
> > - Ran install and make test-coverage in python3.11
> >
> > Best regards,
> > Honah (Jonas)
> >
> > On Tue, Sep 9, 2025 at 3:30 PM Kevin Liu <ke...@apache.org> wrote:
> >
> > > Bump, we need 1 more binding vote :)
> > >
> > > On Mon, Sep 8, 2025 at 9:20 AM Fokko Driesprong <fo...@apache.org>
> wrote:
> > >
> > >> +1 (binding)
> > >>
> > >> Kind regards,
> > >> Fokko
> > >>
> > >> Op vr 5 sep 2025 om 08:30 schreef Drew <im...@gmail.com>:
> > >>
> > >>> +1 (non-binding)
> > >>>
> > >>> - verified signature and checksum
> > >>> - verified RAT license check
> > >>> - ran install, tests, and integration tests in python 3.11
> > >>>
> > >>> - Drew
> > >>>
> > >>>
> > >>> On Wed, Sep 3, 2025 at 11:21 AM Kevin Liu <ke...@apache.org>
> wrote:
> > >>>
> > >>>> Thanks for the feedback, Dan!
> > >>>> I started an issue to track it,
> > >>>> https://github.com/apache/iceberg-python/issues/2425. Let me see
> how
> > >>>> we can improve the experience.
> > >>>>
> > >>>> Best,
> > >>>> Kevin Liu
> > >>>>
> > >>>> On Wed, Sep 3, 2025 at 9:29 AM Daniel Weeks <dw...@apache.org>
> wrote:
> > >>>>
> > >>>>> +1 (binding)
> > >>>>>
> > >>>>> Verified sigs/sums/license/build/test (Python 3.11)
> > >>>>>
> > >>>>> A few notes from my verification:
> > >>>>>
> > >>>>> I ran into a number of issues with the integration tests including
> > >>>>>
> > >>>>>    1. Pandas wasn't installed with 'make install', but is required
> to
> > >>>>>    run the tests
> > >>>>>    2. Running the tests doesn't work in a virtual environment
> because
> > >>>>>    we use --user in the poetry install
> > >>>>>    3. Running the tests hit errors like 'OSError: [Errno 24] Too
> many
> > >>>>>    open files'
> > >>>>>    4. Docker compose didn't shutdown after tests/failures
> > >>>>>
> > >>>>> None of these are really blocking for the release, but it makes
> > >>>>> running verification somewhat difficult and error prone.
> > >>>>>
> > >>>>> -Dan
> > >>>>>
> > >>>>>
> > >>>>> On Wed, Sep 3, 2025 at 8:48 AM Yingjian Wu <yi...@gmail.com>
> > >>>>> wrote:
> > >>>>>
> > >>>>>> +1 (non-binding)
> > >>>>>>
> > >>>>>> I follow the section of verify a release, and verified
> > >>>>>>
> > >>>>>>    - signatures
> > >>>>>>    - checksums
> > >>>>>>    - license header
> > >>>>>>    - build
> > >>>>>>    - test coverage
> > >>>>>>
> > >>>>>>
> > >>>>>> Thank Fokko for running the release, and everyone for the hard
> work
> > >>>>>> to make the release happen!
> > >>>>>>
> > >>>>>> Best,
> > >>>>>> Yingjian
> > >>>>>>
> > >>>>>> On Tue, 2 Sept 2025 at 21:39, Jean-Baptiste Onofré <
> jb@nanthrax.net>
> > >>>>>> wrote:
> > >>>>>>
> > >>>>>>> +1 (non binding)
> > >>>>>>>
> > >>>>>>> I checked:
> > >>>>>>> - Checksum and signature are good
> > >>>>>>> - LICENSE and NOTICE look good
> > >>>>>>> - No binary file in the source distribution
> > >>>>>>> - Correct header
> > >>>>>>>
> > >>>>>>> Regards
> > >>>>>>> JB
> > >>>>>>>
> > >>>>>>> On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <
> fokko@apache.org>
> > >>>>>>> wrote:
> > >>>>>>> >
> > >>>>>>> > Hi Everyone,
> > >>>>>>> >
> > >>>>>>> > With great excitement I propose that we release the following
> RC
> > >>>>>>> as the official PyIceberg 0.10.0 release.
> > >>>>>>> >
> > >>>>>>> > A summary of the high level features:
> > >>>>>>> >
> > >>>>>>> > Initial V3 support (read-only): Initial-defaults, UnknownType,
> > >>>>>>> Reading Deletion Vectors
> > >>>>>>> > Introduction of the AuthManager with various implementations
> > >>>>>>> > First TableMaintenance feature: Expire Snapshots
> > >>>>>>> > Replace Arrow partition transforms with Iceberg-Rust
> > >>>>>>> > Support for ADLS
> > >>>>>>> > Fixed a lot of bugs and improvements: UUID support, Imported
> Hive
> > >>>>>>> tables, Avro Gzip compression, reduced upsert memory pressure,
> several
> > >>>>>>> performance optimizations around metadata tables, parallel
> add-files
> > >>>>>>> operation, and much more!
> > >>>>>>> >
> > >>>>>>> > Big shout out to the community for working on this, and joining
> > >>>>>>> the discussion on Slack, GitHub and the dev-list!
> > >>>>>>> >
> > >>>>>>> > The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
> > >>>>>>> >
> > >>>>>>> > This corresponds to the tag: pyiceberg-0.10.0rc3
> > >>>>>>> (151be021d7d20cafdd03560c4c5398d51c54551c)
> > >>>>>>> >
> > >>>>>>>
> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
> > >>>>>>> >
> > >>>>>>>
> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
> > >>>>>>> >
> > >>>>>>> > The release tarball, signature, and checksums are here:
> > >>>>>>> >
> > >>>>>>> >
> > >>>>>>>
> https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
> > >>>>>>> >
> > >>>>>>> > You can find the KEYS file here:
> > >>>>>>> >
> > >>>>>>> > https://downloads.apache.org/iceberg/KEYS
> > >>>>>>> >
> > >>>>>>> > Convenience binary artifacts are staged on pypi:
> > >>>>>>> >
> > >>>>>>> > https://pypi.org/project/pyiceberg/0.10.0rc3/
> > >>>>>>> >
> > >>>>>>> > And can be installed using: pip3 install pyiceberg==0.10.0rc3
> > >>>>>>> >
> > >>>>>>> > Instructions for verifying a release can be found here:
> > >>>>>>> >
> > >>>>>>> > https://py.iceberg.apache.org/verify-release/
> > >>>>>>> >
> > >>>>>>> > Please download, verify, and test.
> > >>>>>>> >
> > >>>>>>> > Please vote in the next 72 hours.
> > >>>>>>> > [ ] +1 Release this as PyIceberg 0.10.0
> > >>>>>>> > [ ] +0
> > >>>>>>> > [ ] -1 Do not release this because...
> > >>>>>>> >
> > >>>>>>> > Kind regards,
> > >>>>>>> > Fokko
> > >>>>>>>
> > >>>>>>
> >
>

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Sung Yun <su...@apache.org>.
+1 (non-binding)

Thank you Fokko! 

- Verified signatures, checksums
- Verified license documentation
- Installed and tested from source distribution using Python 3.12

Sung

On 2025/09/09 21:56:39 "Honah J." wrote:
> +1 (binding)
> 
> - Verified signature/checksum/license
> - Ran install and make test-coverage in python3.11
> 
> Best regards,
> Honah (Jonas)
> 
> On Tue, Sep 9, 2025 at 3:30 PM Kevin Liu <ke...@apache.org> wrote:
> 
> > Bump, we need 1 more binding vote :)
> >
> > On Mon, Sep 8, 2025 at 9:20 AM Fokko Driesprong <fo...@apache.org> wrote:
> >
> >> +1 (binding)
> >>
> >> Kind regards,
> >> Fokko
> >>
> >> Op vr 5 sep 2025 om 08:30 schreef Drew <im...@gmail.com>:
> >>
> >>> +1 (non-binding)
> >>>
> >>> - verified signature and checksum
> >>> - verified RAT license check
> >>> - ran install, tests, and integration tests in python 3.11
> >>>
> >>> - Drew
> >>>
> >>>
> >>> On Wed, Sep 3, 2025 at 11:21 AM Kevin Liu <ke...@apache.org> wrote:
> >>>
> >>>> Thanks for the feedback, Dan!
> >>>> I started an issue to track it,
> >>>> https://github.com/apache/iceberg-python/issues/2425. Let me see how
> >>>> we can improve the experience.
> >>>>
> >>>> Best,
> >>>> Kevin Liu
> >>>>
> >>>> On Wed, Sep 3, 2025 at 9:29 AM Daniel Weeks <dw...@apache.org> wrote:
> >>>>
> >>>>> +1 (binding)
> >>>>>
> >>>>> Verified sigs/sums/license/build/test (Python 3.11)
> >>>>>
> >>>>> A few notes from my verification:
> >>>>>
> >>>>> I ran into a number of issues with the integration tests including
> >>>>>
> >>>>>    1. Pandas wasn't installed with 'make install', but is required to
> >>>>>    run the tests
> >>>>>    2. Running the tests doesn't work in a virtual environment because
> >>>>>    we use --user in the poetry install
> >>>>>    3. Running the tests hit errors like 'OSError: [Errno 24] Too many
> >>>>>    open files'
> >>>>>    4. Docker compose didn't shutdown after tests/failures
> >>>>>
> >>>>> None of these are really blocking for the release, but it makes
> >>>>> running verification somewhat difficult and error prone.
> >>>>>
> >>>>> -Dan
> >>>>>
> >>>>>
> >>>>> On Wed, Sep 3, 2025 at 8:48 AM Yingjian Wu <yi...@gmail.com>
> >>>>> wrote:
> >>>>>
> >>>>>> +1 (non-binding)
> >>>>>>
> >>>>>> I follow the section of verify a release, and verified
> >>>>>>
> >>>>>>    - signatures
> >>>>>>    - checksums
> >>>>>>    - license header
> >>>>>>    - build
> >>>>>>    - test coverage
> >>>>>>
> >>>>>>
> >>>>>> Thank Fokko for running the release, and everyone for the hard work
> >>>>>> to make the release happen!
> >>>>>>
> >>>>>> Best,
> >>>>>> Yingjian
> >>>>>>
> >>>>>> On Tue, 2 Sept 2025 at 21:39, Jean-Baptiste Onofré <jb...@nanthrax.net>
> >>>>>> wrote:
> >>>>>>
> >>>>>>> +1 (non binding)
> >>>>>>>
> >>>>>>> I checked:
> >>>>>>> - Checksum and signature are good
> >>>>>>> - LICENSE and NOTICE look good
> >>>>>>> - No binary file in the source distribution
> >>>>>>> - Correct header
> >>>>>>>
> >>>>>>> Regards
> >>>>>>> JB
> >>>>>>>
> >>>>>>> On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <fo...@apache.org>
> >>>>>>> wrote:
> >>>>>>> >
> >>>>>>> > Hi Everyone,
> >>>>>>> >
> >>>>>>> > With great excitement I propose that we release the following RC
> >>>>>>> as the official PyIceberg 0.10.0 release.
> >>>>>>> >
> >>>>>>> > A summary of the high level features:
> >>>>>>> >
> >>>>>>> > Initial V3 support (read-only): Initial-defaults, UnknownType,
> >>>>>>> Reading Deletion Vectors
> >>>>>>> > Introduction of the AuthManager with various implementations
> >>>>>>> > First TableMaintenance feature: Expire Snapshots
> >>>>>>> > Replace Arrow partition transforms with Iceberg-Rust
> >>>>>>> > Support for ADLS
> >>>>>>> > Fixed a lot of bugs and improvements: UUID support, Imported Hive
> >>>>>>> tables, Avro Gzip compression, reduced upsert memory pressure, several
> >>>>>>> performance optimizations around metadata tables, parallel add-files
> >>>>>>> operation, and much more!
> >>>>>>> >
> >>>>>>> > Big shout out to the community for working on this, and joining
> >>>>>>> the discussion on Slack, GitHub and the dev-list!
> >>>>>>> >
> >>>>>>> > The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
> >>>>>>> >
> >>>>>>> > This corresponds to the tag: pyiceberg-0.10.0rc3
> >>>>>>> (151be021d7d20cafdd03560c4c5398d51c54551c)
> >>>>>>> >
> >>>>>>> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
> >>>>>>> >
> >>>>>>> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
> >>>>>>> >
> >>>>>>> > The release tarball, signature, and checksums are here:
> >>>>>>> >
> >>>>>>> >
> >>>>>>> https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
> >>>>>>> >
> >>>>>>> > You can find the KEYS file here:
> >>>>>>> >
> >>>>>>> > https://downloads.apache.org/iceberg/KEYS
> >>>>>>> >
> >>>>>>> > Convenience binary artifacts are staged on pypi:
> >>>>>>> >
> >>>>>>> > https://pypi.org/project/pyiceberg/0.10.0rc3/
> >>>>>>> >
> >>>>>>> > And can be installed using: pip3 install pyiceberg==0.10.0rc3
> >>>>>>> >
> >>>>>>> > Instructions for verifying a release can be found here:
> >>>>>>> >
> >>>>>>> > https://py.iceberg.apache.org/verify-release/
> >>>>>>> >
> >>>>>>> > Please download, verify, and test.
> >>>>>>> >
> >>>>>>> > Please vote in the next 72 hours.
> >>>>>>> > [ ] +1 Release this as PyIceberg 0.10.0
> >>>>>>> > [ ] +0
> >>>>>>> > [ ] -1 Do not release this because...
> >>>>>>> >
> >>>>>>> > Kind regards,
> >>>>>>> > Fokko
> >>>>>>>
> >>>>>>
> 

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by "Honah J." <ho...@apache.org>.
+1 (binding)

- Verified signature/checksum/license
- Ran install and make test-coverage in python3.11

Best regards,
Honah (Jonas)

On Tue, Sep 9, 2025 at 3:30 PM Kevin Liu <ke...@apache.org> wrote:

> Bump, we need 1 more binding vote :)
>
> On Mon, Sep 8, 2025 at 9:20 AM Fokko Driesprong <fo...@apache.org> wrote:
>
>> +1 (binding)
>>
>> Kind regards,
>> Fokko
>>
>> Op vr 5 sep 2025 om 08:30 schreef Drew <im...@gmail.com>:
>>
>>> +1 (non-binding)
>>>
>>> - verified signature and checksum
>>> - verified RAT license check
>>> - ran install, tests, and integration tests in python 3.11
>>>
>>> - Drew
>>>
>>>
>>> On Wed, Sep 3, 2025 at 11:21 AM Kevin Liu <ke...@apache.org> wrote:
>>>
>>>> Thanks for the feedback, Dan!
>>>> I started an issue to track it,
>>>> https://github.com/apache/iceberg-python/issues/2425. Let me see how
>>>> we can improve the experience.
>>>>
>>>> Best,
>>>> Kevin Liu
>>>>
>>>> On Wed, Sep 3, 2025 at 9:29 AM Daniel Weeks <dw...@apache.org> wrote:
>>>>
>>>>> +1 (binding)
>>>>>
>>>>> Verified sigs/sums/license/build/test (Python 3.11)
>>>>>
>>>>> A few notes from my verification:
>>>>>
>>>>> I ran into a number of issues with the integration tests including
>>>>>
>>>>>    1. Pandas wasn't installed with 'make install', but is required to
>>>>>    run the tests
>>>>>    2. Running the tests doesn't work in a virtual environment because
>>>>>    we use --user in the poetry install
>>>>>    3. Running the tests hit errors like 'OSError: [Errno 24] Too many
>>>>>    open files'
>>>>>    4. Docker compose didn't shutdown after tests/failures
>>>>>
>>>>> None of these are really blocking for the release, but it makes
>>>>> running verification somewhat difficult and error prone.
>>>>>
>>>>> -Dan
>>>>>
>>>>>
>>>>> On Wed, Sep 3, 2025 at 8:48 AM Yingjian Wu <yi...@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> +1 (non-binding)
>>>>>>
>>>>>> I follow the section of verify a release, and verified
>>>>>>
>>>>>>    - signatures
>>>>>>    - checksums
>>>>>>    - license header
>>>>>>    - build
>>>>>>    - test coverage
>>>>>>
>>>>>>
>>>>>> Thank Fokko for running the release, and everyone for the hard work
>>>>>> to make the release happen!
>>>>>>
>>>>>> Best,
>>>>>> Yingjian
>>>>>>
>>>>>> On Tue, 2 Sept 2025 at 21:39, Jean-Baptiste Onofré <jb...@nanthrax.net>
>>>>>> wrote:
>>>>>>
>>>>>>> +1 (non binding)
>>>>>>>
>>>>>>> I checked:
>>>>>>> - Checksum and signature are good
>>>>>>> - LICENSE and NOTICE look good
>>>>>>> - No binary file in the source distribution
>>>>>>> - Correct header
>>>>>>>
>>>>>>> Regards
>>>>>>> JB
>>>>>>>
>>>>>>> On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <fo...@apache.org>
>>>>>>> wrote:
>>>>>>> >
>>>>>>> > Hi Everyone,
>>>>>>> >
>>>>>>> > With great excitement I propose that we release the following RC
>>>>>>> as the official PyIceberg 0.10.0 release.
>>>>>>> >
>>>>>>> > A summary of the high level features:
>>>>>>> >
>>>>>>> > Initial V3 support (read-only): Initial-defaults, UnknownType,
>>>>>>> Reading Deletion Vectors
>>>>>>> > Introduction of the AuthManager with various implementations
>>>>>>> > First TableMaintenance feature: Expire Snapshots
>>>>>>> > Replace Arrow partition transforms with Iceberg-Rust
>>>>>>> > Support for ADLS
>>>>>>> > Fixed a lot of bugs and improvements: UUID support, Imported Hive
>>>>>>> tables, Avro Gzip compression, reduced upsert memory pressure, several
>>>>>>> performance optimizations around metadata tables, parallel add-files
>>>>>>> operation, and much more!
>>>>>>> >
>>>>>>> > Big shout out to the community for working on this, and joining
>>>>>>> the discussion on Slack, GitHub and the dev-list!
>>>>>>> >
>>>>>>> > The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
>>>>>>> >
>>>>>>> > This corresponds to the tag: pyiceberg-0.10.0rc3
>>>>>>> (151be021d7d20cafdd03560c4c5398d51c54551c)
>>>>>>> >
>>>>>>> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
>>>>>>> >
>>>>>>> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
>>>>>>> >
>>>>>>> > The release tarball, signature, and checksums are here:
>>>>>>> >
>>>>>>> >
>>>>>>> https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
>>>>>>> >
>>>>>>> > You can find the KEYS file here:
>>>>>>> >
>>>>>>> > https://downloads.apache.org/iceberg/KEYS
>>>>>>> >
>>>>>>> > Convenience binary artifacts are staged on pypi:
>>>>>>> >
>>>>>>> > https://pypi.org/project/pyiceberg/0.10.0rc3/
>>>>>>> >
>>>>>>> > And can be installed using: pip3 install pyiceberg==0.10.0rc3
>>>>>>> >
>>>>>>> > Instructions for verifying a release can be found here:
>>>>>>> >
>>>>>>> > https://py.iceberg.apache.org/verify-release/
>>>>>>> >
>>>>>>> > Please download, verify, and test.
>>>>>>> >
>>>>>>> > Please vote in the next 72 hours.
>>>>>>> > [ ] +1 Release this as PyIceberg 0.10.0
>>>>>>> > [ ] +0
>>>>>>> > [ ] -1 Do not release this because...
>>>>>>> >
>>>>>>> > Kind regards,
>>>>>>> > Fokko
>>>>>>>
>>>>>>

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Kevin Liu <ke...@apache.org>.
Bump, we need 1 more binding vote :)

On Mon, Sep 8, 2025 at 9:20 AM Fokko Driesprong <fo...@apache.org> wrote:

> +1 (binding)
>
> Kind regards,
> Fokko
>
> Op vr 5 sep 2025 om 08:30 schreef Drew <im...@gmail.com>:
>
>> +1 (non-binding)
>>
>> - verified signature and checksum
>> - verified RAT license check
>> - ran install, tests, and integration tests in python 3.11
>>
>> - Drew
>>
>>
>> On Wed, Sep 3, 2025 at 11:21 AM Kevin Liu <ke...@apache.org> wrote:
>>
>>> Thanks for the feedback, Dan!
>>> I started an issue to track it,
>>> https://github.com/apache/iceberg-python/issues/2425. Let me see how we
>>> can improve the experience.
>>>
>>> Best,
>>> Kevin Liu
>>>
>>> On Wed, Sep 3, 2025 at 9:29 AM Daniel Weeks <dw...@apache.org> wrote:
>>>
>>>> +1 (binding)
>>>>
>>>> Verified sigs/sums/license/build/test (Python 3.11)
>>>>
>>>> A few notes from my verification:
>>>>
>>>> I ran into a number of issues with the integration tests including
>>>>
>>>>    1. Pandas wasn't installed with 'make install', but is required to
>>>>    run the tests
>>>>    2. Running the tests doesn't work in a virtual environment because
>>>>    we use --user in the poetry install
>>>>    3. Running the tests hit errors like 'OSError: [Errno 24] Too many
>>>>    open files'
>>>>    4. Docker compose didn't shutdown after tests/failures
>>>>
>>>> None of these are really blocking for the release, but it makes running
>>>> verification somewhat difficult and error prone.
>>>>
>>>> -Dan
>>>>
>>>>
>>>> On Wed, Sep 3, 2025 at 8:48 AM Yingjian Wu <yi...@gmail.com>
>>>> wrote:
>>>>
>>>>> +1 (non-binding)
>>>>>
>>>>> I follow the section of verify a release, and verified
>>>>>
>>>>>    - signatures
>>>>>    - checksums
>>>>>    - license header
>>>>>    - build
>>>>>    - test coverage
>>>>>
>>>>>
>>>>> Thank Fokko for running the release, and everyone for the hard work to
>>>>> make the release happen!
>>>>>
>>>>> Best,
>>>>> Yingjian
>>>>>
>>>>> On Tue, 2 Sept 2025 at 21:39, Jean-Baptiste Onofré <jb...@nanthrax.net>
>>>>> wrote:
>>>>>
>>>>>> +1 (non binding)
>>>>>>
>>>>>> I checked:
>>>>>> - Checksum and signature are good
>>>>>> - LICENSE and NOTICE look good
>>>>>> - No binary file in the source distribution
>>>>>> - Correct header
>>>>>>
>>>>>> Regards
>>>>>> JB
>>>>>>
>>>>>> On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <fo...@apache.org>
>>>>>> wrote:
>>>>>> >
>>>>>> > Hi Everyone,
>>>>>> >
>>>>>> > With great excitement I propose that we release the following RC as
>>>>>> the official PyIceberg 0.10.0 release.
>>>>>> >
>>>>>> > A summary of the high level features:
>>>>>> >
>>>>>> > Initial V3 support (read-only): Initial-defaults, UnknownType,
>>>>>> Reading Deletion Vectors
>>>>>> > Introduction of the AuthManager with various implementations
>>>>>> > First TableMaintenance feature: Expire Snapshots
>>>>>> > Replace Arrow partition transforms with Iceberg-Rust
>>>>>> > Support for ADLS
>>>>>> > Fixed a lot of bugs and improvements: UUID support, Imported Hive
>>>>>> tables, Avro Gzip compression, reduced upsert memory pressure, several
>>>>>> performance optimizations around metadata tables, parallel add-files
>>>>>> operation, and much more!
>>>>>> >
>>>>>> > Big shout out to the community for working on this, and joining the
>>>>>> discussion on Slack, GitHub and the dev-list!
>>>>>> >
>>>>>> > The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
>>>>>> >
>>>>>> > This corresponds to the tag: pyiceberg-0.10.0rc3
>>>>>> (151be021d7d20cafdd03560c4c5398d51c54551c)
>>>>>> >
>>>>>> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
>>>>>> >
>>>>>> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
>>>>>> >
>>>>>> > The release tarball, signature, and checksums are here:
>>>>>> >
>>>>>> > https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
>>>>>> >
>>>>>> > You can find the KEYS file here:
>>>>>> >
>>>>>> > https://downloads.apache.org/iceberg/KEYS
>>>>>> >
>>>>>> > Convenience binary artifacts are staged on pypi:
>>>>>> >
>>>>>> > https://pypi.org/project/pyiceberg/0.10.0rc3/
>>>>>> >
>>>>>> > And can be installed using: pip3 install pyiceberg==0.10.0rc3
>>>>>> >
>>>>>> > Instructions for verifying a release can be found here:
>>>>>> >
>>>>>> > https://py.iceberg.apache.org/verify-release/
>>>>>> >
>>>>>> > Please download, verify, and test.
>>>>>> >
>>>>>> > Please vote in the next 72 hours.
>>>>>> > [ ] +1 Release this as PyIceberg 0.10.0
>>>>>> > [ ] +0
>>>>>> > [ ] -1 Do not release this because...
>>>>>> >
>>>>>> > Kind regards,
>>>>>> > Fokko
>>>>>>
>>>>>

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Fokko Driesprong <fo...@apache.org>.
+1 (binding)

Kind regards,
Fokko

Op vr 5 sep 2025 om 08:30 schreef Drew <im...@gmail.com>:

> +1 (non-binding)
>
> - verified signature and checksum
> - verified RAT license check
> - ran install, tests, and integration tests in python 3.11
>
> - Drew
>
>
> On Wed, Sep 3, 2025 at 11:21 AM Kevin Liu <ke...@apache.org> wrote:
>
>> Thanks for the feedback, Dan!
>> I started an issue to track it,
>> https://github.com/apache/iceberg-python/issues/2425. Let me see how we
>> can improve the experience.
>>
>> Best,
>> Kevin Liu
>>
>> On Wed, Sep 3, 2025 at 9:29 AM Daniel Weeks <dw...@apache.org> wrote:
>>
>>> +1 (binding)
>>>
>>> Verified sigs/sums/license/build/test (Python 3.11)
>>>
>>> A few notes from my verification:
>>>
>>> I ran into a number of issues with the integration tests including
>>>
>>>    1. Pandas wasn't installed with 'make install', but is required to
>>>    run the tests
>>>    2. Running the tests doesn't work in a virtual environment because
>>>    we use --user in the poetry install
>>>    3. Running the tests hit errors like 'OSError: [Errno 24] Too many
>>>    open files'
>>>    4. Docker compose didn't shutdown after tests/failures
>>>
>>> None of these are really blocking for the release, but it makes running
>>> verification somewhat difficult and error prone.
>>>
>>> -Dan
>>>
>>>
>>> On Wed, Sep 3, 2025 at 8:48 AM Yingjian Wu <yi...@gmail.com>
>>> wrote:
>>>
>>>> +1 (non-binding)
>>>>
>>>> I follow the section of verify a release, and verified
>>>>
>>>>    - signatures
>>>>    - checksums
>>>>    - license header
>>>>    - build
>>>>    - test coverage
>>>>
>>>>
>>>> Thank Fokko for running the release, and everyone for the hard work to
>>>> make the release happen!
>>>>
>>>> Best,
>>>> Yingjian
>>>>
>>>> On Tue, 2 Sept 2025 at 21:39, Jean-Baptiste Onofré <jb...@nanthrax.net>
>>>> wrote:
>>>>
>>>>> +1 (non binding)
>>>>>
>>>>> I checked:
>>>>> - Checksum and signature are good
>>>>> - LICENSE and NOTICE look good
>>>>> - No binary file in the source distribution
>>>>> - Correct header
>>>>>
>>>>> Regards
>>>>> JB
>>>>>
>>>>> On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <fo...@apache.org>
>>>>> wrote:
>>>>> >
>>>>> > Hi Everyone,
>>>>> >
>>>>> > With great excitement I propose that we release the following RC as
>>>>> the official PyIceberg 0.10.0 release.
>>>>> >
>>>>> > A summary of the high level features:
>>>>> >
>>>>> > Initial V3 support (read-only): Initial-defaults, UnknownType,
>>>>> Reading Deletion Vectors
>>>>> > Introduction of the AuthManager with various implementations
>>>>> > First TableMaintenance feature: Expire Snapshots
>>>>> > Replace Arrow partition transforms with Iceberg-Rust
>>>>> > Support for ADLS
>>>>> > Fixed a lot of bugs and improvements: UUID support, Imported Hive
>>>>> tables, Avro Gzip compression, reduced upsert memory pressure, several
>>>>> performance optimizations around metadata tables, parallel add-files
>>>>> operation, and much more!
>>>>> >
>>>>> > Big shout out to the community for working on this, and joining the
>>>>> discussion on Slack, GitHub and the dev-list!
>>>>> >
>>>>> > The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
>>>>> >
>>>>> > This corresponds to the tag: pyiceberg-0.10.0rc3
>>>>> (151be021d7d20cafdd03560c4c5398d51c54551c)
>>>>> >
>>>>> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
>>>>> >
>>>>> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
>>>>> >
>>>>> > The release tarball, signature, and checksums are here:
>>>>> >
>>>>> > https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
>>>>> >
>>>>> > You can find the KEYS file here:
>>>>> >
>>>>> > https://downloads.apache.org/iceberg/KEYS
>>>>> >
>>>>> > Convenience binary artifacts are staged on pypi:
>>>>> >
>>>>> > https://pypi.org/project/pyiceberg/0.10.0rc3/
>>>>> >
>>>>> > And can be installed using: pip3 install pyiceberg==0.10.0rc3
>>>>> >
>>>>> > Instructions for verifying a release can be found here:
>>>>> >
>>>>> > https://py.iceberg.apache.org/verify-release/
>>>>> >
>>>>> > Please download, verify, and test.
>>>>> >
>>>>> > Please vote in the next 72 hours.
>>>>> > [ ] +1 Release this as PyIceberg 0.10.0
>>>>> > [ ] +0
>>>>> > [ ] -1 Do not release this because...
>>>>> >
>>>>> > Kind regards,
>>>>> > Fokko
>>>>>
>>>>

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Drew <im...@gmail.com>.
+1 (non-binding)

- verified signature and checksum
- verified RAT license check
- ran install, tests, and integration tests in python 3.11

- Drew


On Wed, Sep 3, 2025 at 11:21 AM Kevin Liu <ke...@apache.org> wrote:

> Thanks for the feedback, Dan!
> I started an issue to track it,
> https://github.com/apache/iceberg-python/issues/2425. Let me see how we
> can improve the experience.
>
> Best,
> Kevin Liu
>
> On Wed, Sep 3, 2025 at 9:29 AM Daniel Weeks <dw...@apache.org> wrote:
>
>> +1 (binding)
>>
>> Verified sigs/sums/license/build/test (Python 3.11)
>>
>> A few notes from my verification:
>>
>> I ran into a number of issues with the integration tests including
>>
>>    1. Pandas wasn't installed with 'make install', but is required to
>>    run the tests
>>    2. Running the tests doesn't work in a virtual environment because we
>>    use --user in the poetry install
>>    3. Running the tests hit errors like 'OSError: [Errno 24] Too many
>>    open files'
>>    4. Docker compose didn't shutdown after tests/failures
>>
>> None of these are really blocking for the release, but it makes running
>> verification somewhat difficult and error prone.
>>
>> -Dan
>>
>>
>> On Wed, Sep 3, 2025 at 8:48 AM Yingjian Wu <yi...@gmail.com> wrote:
>>
>>> +1 (non-binding)
>>>
>>> I follow the section of verify a release, and verified
>>>
>>>    - signatures
>>>    - checksums
>>>    - license header
>>>    - build
>>>    - test coverage
>>>
>>>
>>> Thank Fokko for running the release, and everyone for the hard work to
>>> make the release happen!
>>>
>>> Best,
>>> Yingjian
>>>
>>> On Tue, 2 Sept 2025 at 21:39, Jean-Baptiste Onofré <jb...@nanthrax.net>
>>> wrote:
>>>
>>>> +1 (non binding)
>>>>
>>>> I checked:
>>>> - Checksum and signature are good
>>>> - LICENSE and NOTICE look good
>>>> - No binary file in the source distribution
>>>> - Correct header
>>>>
>>>> Regards
>>>> JB
>>>>
>>>> On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <fo...@apache.org>
>>>> wrote:
>>>> >
>>>> > Hi Everyone,
>>>> >
>>>> > With great excitement I propose that we release the following RC as
>>>> the official PyIceberg 0.10.0 release.
>>>> >
>>>> > A summary of the high level features:
>>>> >
>>>> > Initial V3 support (read-only): Initial-defaults, UnknownType,
>>>> Reading Deletion Vectors
>>>> > Introduction of the AuthManager with various implementations
>>>> > First TableMaintenance feature: Expire Snapshots
>>>> > Replace Arrow partition transforms with Iceberg-Rust
>>>> > Support for ADLS
>>>> > Fixed a lot of bugs and improvements: UUID support, Imported Hive
>>>> tables, Avro Gzip compression, reduced upsert memory pressure, several
>>>> performance optimizations around metadata tables, parallel add-files
>>>> operation, and much more!
>>>> >
>>>> > Big shout out to the community for working on this, and joining the
>>>> discussion on Slack, GitHub and the dev-list!
>>>> >
>>>> > The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
>>>> >
>>>> > This corresponds to the tag: pyiceberg-0.10.0rc3
>>>> (151be021d7d20cafdd03560c4c5398d51c54551c)
>>>> >
>>>> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
>>>> >
>>>> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
>>>> >
>>>> > The release tarball, signature, and checksums are here:
>>>> >
>>>> > https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
>>>> >
>>>> > You can find the KEYS file here:
>>>> >
>>>> > https://downloads.apache.org/iceberg/KEYS
>>>> >
>>>> > Convenience binary artifacts are staged on pypi:
>>>> >
>>>> > https://pypi.org/project/pyiceberg/0.10.0rc3/
>>>> >
>>>> > And can be installed using: pip3 install pyiceberg==0.10.0rc3
>>>> >
>>>> > Instructions for verifying a release can be found here:
>>>> >
>>>> > https://py.iceberg.apache.org/verify-release/
>>>> >
>>>> > Please download, verify, and test.
>>>> >
>>>> > Please vote in the next 72 hours.
>>>> > [ ] +1 Release this as PyIceberg 0.10.0
>>>> > [ ] +0
>>>> > [ ] -1 Do not release this because...
>>>> >
>>>> > Kind regards,
>>>> > Fokko
>>>>
>>>

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Kevin Liu <ke...@apache.org>.
Thanks for the feedback, Dan!
I started an issue to track it,
https://github.com/apache/iceberg-python/issues/2425. Let me see how we can
improve the experience.

Best,
Kevin Liu

On Wed, Sep 3, 2025 at 9:29 AM Daniel Weeks <dw...@apache.org> wrote:

> +1 (binding)
>
> Verified sigs/sums/license/build/test (Python 3.11)
>
> A few notes from my verification:
>
> I ran into a number of issues with the integration tests including
>
>    1. Pandas wasn't installed with 'make install', but is required to run
>    the tests
>    2. Running the tests doesn't work in a virtual environment because we
>    use --user in the poetry install
>    3. Running the tests hit errors like 'OSError: [Errno 24] Too many
>    open files'
>    4. Docker compose didn't shutdown after tests/failures
>
> None of these are really blocking for the release, but it makes running
> verification somewhat difficult and error prone.
>
> -Dan
>
>
> On Wed, Sep 3, 2025 at 8:48 AM Yingjian Wu <yi...@gmail.com> wrote:
>
>> +1 (non-binding)
>>
>> I follow the section of verify a release, and verified
>>
>>    - signatures
>>    - checksums
>>    - license header
>>    - build
>>    - test coverage
>>
>>
>> Thank Fokko for running the release, and everyone for the hard work to
>> make the release happen!
>>
>> Best,
>> Yingjian
>>
>> On Tue, 2 Sept 2025 at 21:39, Jean-Baptiste Onofré <jb...@nanthrax.net>
>> wrote:
>>
>>> +1 (non binding)
>>>
>>> I checked:
>>> - Checksum and signature are good
>>> - LICENSE and NOTICE look good
>>> - No binary file in the source distribution
>>> - Correct header
>>>
>>> Regards
>>> JB
>>>
>>> On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <fo...@apache.org>
>>> wrote:
>>> >
>>> > Hi Everyone,
>>> >
>>> > With great excitement I propose that we release the following RC as
>>> the official PyIceberg 0.10.0 release.
>>> >
>>> > A summary of the high level features:
>>> >
>>> > Initial V3 support (read-only): Initial-defaults, UnknownType, Reading
>>> Deletion Vectors
>>> > Introduction of the AuthManager with various implementations
>>> > First TableMaintenance feature: Expire Snapshots
>>> > Replace Arrow partition transforms with Iceberg-Rust
>>> > Support for ADLS
>>> > Fixed a lot of bugs and improvements: UUID support, Imported Hive
>>> tables, Avro Gzip compression, reduced upsert memory pressure, several
>>> performance optimizations around metadata tables, parallel add-files
>>> operation, and much more!
>>> >
>>> > Big shout out to the community for working on this, and joining the
>>> discussion on Slack, GitHub and the dev-list!
>>> >
>>> > The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
>>> >
>>> > This corresponds to the tag: pyiceberg-0.10.0rc3
>>> (151be021d7d20cafdd03560c4c5398d51c54551c)
>>> >
>>> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
>>> >
>>> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
>>> >
>>> > The release tarball, signature, and checksums are here:
>>> >
>>> > https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
>>> >
>>> > You can find the KEYS file here:
>>> >
>>> > https://downloads.apache.org/iceberg/KEYS
>>> >
>>> > Convenience binary artifacts are staged on pypi:
>>> >
>>> > https://pypi.org/project/pyiceberg/0.10.0rc3/
>>> >
>>> > And can be installed using: pip3 install pyiceberg==0.10.0rc3
>>> >
>>> > Instructions for verifying a release can be found here:
>>> >
>>> > https://py.iceberg.apache.org/verify-release/
>>> >
>>> > Please download, verify, and test.
>>> >
>>> > Please vote in the next 72 hours.
>>> > [ ] +1 Release this as PyIceberg 0.10.0
>>> > [ ] +0
>>> > [ ] -1 Do not release this because...
>>> >
>>> > Kind regards,
>>> > Fokko
>>>
>>

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Daniel Weeks <dw...@apache.org>.
+1 (binding)

Verified sigs/sums/license/build/test (Python 3.11)

A few notes from my verification:

I ran into a number of issues with the integration tests including

   1. Pandas wasn't installed with 'make install', but is required to run
   the tests
   2. Running the tests doesn't work in a virtual environment because we
   use --user in the poetry install
   3. Running the tests hit errors like 'OSError: [Errno 24] Too many open
   files'
   4. Docker compose didn't shutdown after tests/failures

None of these are really blocking for the release, but it makes running
verification somewhat difficult and error prone.

-Dan


On Wed, Sep 3, 2025 at 8:48 AM Yingjian Wu <yi...@gmail.com> wrote:

> +1 (non-binding)
>
> I follow the section of verify a release, and verified
>
>    - signatures
>    - checksums
>    - license header
>    - build
>    - test coverage
>
>
> Thank Fokko for running the release, and everyone for the hard work to
> make the release happen!
>
> Best,
> Yingjian
>
> On Tue, 2 Sept 2025 at 21:39, Jean-Baptiste Onofré <jb...@nanthrax.net>
> wrote:
>
>> +1 (non binding)
>>
>> I checked:
>> - Checksum and signature are good
>> - LICENSE and NOTICE look good
>> - No binary file in the source distribution
>> - Correct header
>>
>> Regards
>> JB
>>
>> On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <fo...@apache.org> wrote:
>> >
>> > Hi Everyone,
>> >
>> > With great excitement I propose that we release the following RC as the
>> official PyIceberg 0.10.0 release.
>> >
>> > A summary of the high level features:
>> >
>> > Initial V3 support (read-only): Initial-defaults, UnknownType, Reading
>> Deletion Vectors
>> > Introduction of the AuthManager with various implementations
>> > First TableMaintenance feature: Expire Snapshots
>> > Replace Arrow partition transforms with Iceberg-Rust
>> > Support for ADLS
>> > Fixed a lot of bugs and improvements: UUID support, Imported Hive
>> tables, Avro Gzip compression, reduced upsert memory pressure, several
>> performance optimizations around metadata tables, parallel add-files
>> operation, and much more!
>> >
>> > Big shout out to the community for working on this, and joining the
>> discussion on Slack, GitHub and the dev-list!
>> >
>> > The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
>> >
>> > This corresponds to the tag: pyiceberg-0.10.0rc3
>> (151be021d7d20cafdd03560c4c5398d51c54551c)
>> >
>> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
>> >
>> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
>> >
>> > The release tarball, signature, and checksums are here:
>> >
>> > https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
>> >
>> > You can find the KEYS file here:
>> >
>> > https://downloads.apache.org/iceberg/KEYS
>> >
>> > Convenience binary artifacts are staged on pypi:
>> >
>> > https://pypi.org/project/pyiceberg/0.10.0rc3/
>> >
>> > And can be installed using: pip3 install pyiceberg==0.10.0rc3
>> >
>> > Instructions for verifying a release can be found here:
>> >
>> > https://py.iceberg.apache.org/verify-release/
>> >
>> > Please download, verify, and test.
>> >
>> > Please vote in the next 72 hours.
>> > [ ] +1 Release this as PyIceberg 0.10.0
>> > [ ] +0
>> > [ ] -1 Do not release this because...
>> >
>> > Kind regards,
>> > Fokko
>>
>

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Yingjian Wu <yi...@gmail.com>.
+1 (non-binding)

I follow the section of verify a release, and verified

   - signatures
   - checksums
   - license header
   - build
   - test coverage


Thank Fokko for running the release, and everyone for the hard work to make
the release happen!

Best,
Yingjian

On Tue, 2 Sept 2025 at 21:39, Jean-Baptiste Onofré <jb...@nanthrax.net> wrote:

> +1 (non binding)
>
> I checked:
> - Checksum and signature are good
> - LICENSE and NOTICE look good
> - No binary file in the source distribution
> - Correct header
>
> Regards
> JB
>
> On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <fo...@apache.org> wrote:
> >
> > Hi Everyone,
> >
> > With great excitement I propose that we release the following RC as the
> official PyIceberg 0.10.0 release.
> >
> > A summary of the high level features:
> >
> > Initial V3 support (read-only): Initial-defaults, UnknownType, Reading
> Deletion Vectors
> > Introduction of the AuthManager with various implementations
> > First TableMaintenance feature: Expire Snapshots
> > Replace Arrow partition transforms with Iceberg-Rust
> > Support for ADLS
> > Fixed a lot of bugs and improvements: UUID support, Imported Hive
> tables, Avro Gzip compression, reduced upsert memory pressure, several
> performance optimizations around metadata tables, parallel add-files
> operation, and much more!
> >
> > Big shout out to the community for working on this, and joining the
> discussion on Slack, GitHub and the dev-list!
> >
> > The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
> >
> > This corresponds to the tag: pyiceberg-0.10.0rc3
> (151be021d7d20cafdd03560c4c5398d51c54551c)
> >
> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
> >
> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
> >
> > The release tarball, signature, and checksums are here:
> >
> > https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
> >
> > You can find the KEYS file here:
> >
> > https://downloads.apache.org/iceberg/KEYS
> >
> > Convenience binary artifacts are staged on pypi:
> >
> > https://pypi.org/project/pyiceberg/0.10.0rc3/
> >
> > And can be installed using: pip3 install pyiceberg==0.10.0rc3
> >
> > Instructions for verifying a release can be found here:
> >
> > https://py.iceberg.apache.org/verify-release/
> >
> > Please download, verify, and test.
> >
> > Please vote in the next 72 hours.
> > [ ] +1 Release this as PyIceberg 0.10.0
> > [ ] +0
> > [ ] -1 Do not release this because...
> >
> > Kind regards,
> > Fokko
>

Re: [VOTE] Release Apache PyIceberg 0.10.0rc3

Posted by Jean-Baptiste Onofré <jb...@nanthrax.net>.
+1 (non binding)

I checked:
- Checksum and signature are good
- LICENSE and NOTICE look good
- No binary file in the source distribution
- Correct header

Regards
JB

On Tue, Sep 2, 2025 at 4:54 PM Fokko Driesprong <fo...@apache.org> wrote:
>
> Hi Everyone,
>
> With great excitement I propose that we release the following RC as the official PyIceberg 0.10.0 release.
>
> A summary of the high level features:
>
> Initial V3 support (read-only): Initial-defaults, UnknownType, Reading Deletion Vectors
> Introduction of the AuthManager with various implementations
> First TableMaintenance feature: Expire Snapshots
> Replace Arrow partition transforms with Iceberg-Rust
> Support for ADLS
> Fixed a lot of bugs and improvements: UUID support, Imported Hive tables, Avro Gzip compression, reduced upsert memory pressure, several performance optimizations around metadata tables, parallel add-files operation, and much more!
>
> Big shout out to the community for working on this, and joining the discussion on Slack, GitHub and the dev-list!
>
> The commit ID is 7acdb12f5239594e593f2822de75c7a4c669f52f
>
> This corresponds to the tag: pyiceberg-0.10.0rc3 (151be021d7d20cafdd03560c4c5398d51c54551c)
> https://github.com/apache/iceberg-python/releases/tag/pyiceberg-0.10.0rc3
> https://github.com/apache/iceberg-python/tree/7acdb12f5239594e593f2822de75c7a4c669f52f
>
> The release tarball, signature, and checksums are here:
>
> https://dist.apache.org/repos/dist/dev/iceberg/pyiceberg-0.10.0rc3/
>
> You can find the KEYS file here:
>
> https://downloads.apache.org/iceberg/KEYS
>
> Convenience binary artifacts are staged on pypi:
>
> https://pypi.org/project/pyiceberg/0.10.0rc3/
>
> And can be installed using: pip3 install pyiceberg==0.10.0rc3
>
> Instructions for verifying a release can be found here:
>
> https://py.iceberg.apache.org/verify-release/
>
> Please download, verify, and test.
>
> Please vote in the next 72 hours.
> [ ] +1 Release this as PyIceberg 0.10.0
> [ ] +0
> [ ] -1 Do not release this because...
>
> Kind regards,
> Fokko