You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@geronimo.apache.org by Jason van Zyl <ja...@maven.org> on 2005/10/29 09:30:43 UTC
Building specs with Maven 2.x
Hi,
I've got all the specs builds working with Maven 2.x except for the
corba module for which I need to whip up a quick plug-in to deal with
IDL.
Are the specs built frequently because I see that you've changed the
directory structure of the SVN repository and so many of your references
like:
../../etc/project.xml
Won't work anymore unless I'm not seeing something.
If I can get the specs building with Maven 2.x and get the artifacts
produced into the m1 repository, and get the spec builds running under
Continuum can I flip the spec builds over to Maven 2.x standards and use
it as the default build? I figure that the specs don't change that often
and is a good place to start if folks are interesting in converting the
build over to Maven 2.x.
This basically boils down to adhering to this:
http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
And getting a few tips about the corba module (Alan :-)). Everything
else appears to be working.
--
jvz.
Jason van Zyl
jason at maven.org
http://maven.apache.org
you are never dedicated to something you have complete confidence in.
No one is fanatically shouting that the sun is going to rise tomorrow.
They know it is going to rise tomorrow. When people are fanatically
dedicated to political or religious faiths or any other kind of
dogmas or goals, it's always because these dogmas or
goals are in doubt.
-- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
Re: Building specs with Maven 2.x
Posted by Jason van Zyl <ja...@maven.org>.
On Sat, 2005-10-29 at 15:41 -0400, Aaron Mulder wrote:
> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > Aaron,
> >
> > I had the same issue...
> >
> > As a work around...go into your geronimo directory and issue this (all
> > on one line):
> >
> > svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
> >
> > Then you should be able to build it all.
>
> Well, I did that, and when I tried to build that specs tree with Maven
> 2 I got the big Maven stack trace above. But I'll check it on IRC
> and/or later. Bad timing on my part, I guess. :)
The parent POM needs to be available for the specs build to work. The
easiest way to do this (until it is deployed and in the central
repository) is to install the geronimo parent POM you need to go into
geronimo/trunk and
m2 -N install
That will push the POM you need into your local repository and then you
should be able to build the specs. I'll whip up a little document.
--
jvz.
Jason van Zyl
jason at maven.org
http://maven.apache.org
Three people can keep a secret provided two of them are dead.
-- Unknown
Re: Building specs with Maven 2.x
Posted by Jeff Genender <jg...@savoirtech.com>.
Done all jars are in cvs.apache.org now.
Aaron Mulder wrote:
> Jeff,
>
> If you have a working build, can you send the missing
> geronimo-spec-j2ee-jacc-1.0-rc5.jar to the Maven repo? I think you
> can run "maven jar:deploy" from that spec directory.
>
> Thanks,
> Aaron
>
> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>> Aaron,
>>
>> If you try maven 1.0.2 and it still fails, let me know and I am happy to
>> recheck-in spec to our geronimo tree (of course with the permission of
>> the team).
>>
>> Team,
>>
>> I propose we get this back in its old location, until its at least
>> buildable for an m1 repo, since geronimo still depends on an m1
>> repository. I am +1 on getting m2 poms for this, but it needs m1 as
>> well. Until the geronimo trunk is converted over to an m2 repo, or we
>> have scripts that copy spec from ibiblio m2 to m1 repos (regularly), we
>> need to keep it in the geronimo trunk until the m1 component is fixed to
>> live on its own.
>>
>> Comments?
>>
>> Jeff
>>
>> Jeff Genender wrote:
>>> Ok...I guess the only difference between you and me is I used maven
>>> 1.0.2 (I found a nasty bug in maven 1.1 so won't use it yet).
>>>
>>> I got a full build with 1.0.2. You may wish to try that.
>>>
>>> At least you got further...progress ;-)
>>>
>>> Jeff
>>>
>>> Aaron Mulder wrote:
>>>> Well, when I tried checking out specs *into* geronimo, and building
>>>> Geronimo with Maven 1.1-beta-2, I got the error below. When I move
>>>> specs out again, the Geronimo build at least gets past the "calculate
>>>> submodules" stage, and then fails with the missing dependency
>>>> error(s). Not a good build day for me. :)
>>>>
>>>> Aaron
>>>>
>>>>
>>>> maven -o
>>>> __ __
>>>> | \/ |__ _Apache__ ___
>>>> | |\/| / _` \ V / -_) ' \ ~ intelligent projects ~
>>>> |_| |_\__,_|\_/\___|_||_| v. 1.1-beta-2
>>>>
>>>> DEPRECATED: the default goal should be specified in the <build>
>>>> section of project.xml instead of maven.xml
>>>> DEPRECATED: the default goal should be specified in the <build>
>>>> section of project.xml instead of maven.xml
>>>> build:start:
>>>>
>>>> m:-all:
>>>>
>>>> m:init:
>>>>
>>>> m:default:
>>>> multiproject:projects-init:
>>>> [echo] Gathering project list
>>>> Starting the reactor...
>>>>
>>>> BUILD FAILED
>>>> File......
>>>> /Users/ammulder/.maven/cache/maven-multiproject-plugin-1.4.1/plugin.jelly
>>>> Element... maven:reactor
>>>> Line...... 64
>>>> Column.... -1
>>>> Unknown error reading project
>>>> Total time : 15 seconds
>>>> Finished at : Saturday, October 29, 2005 8:44:34 PM EDT
>>>>
>>>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
>>>>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
>>>>>> Hmm, after looking again, I notice that you're checkout out specs
>>>>>> *into* your Geronimo directory -- I guess that's the difference.
>>>>>>
>>>>>> Aaron
>>>>>>
>>>>>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>> I think the flux is that you didn't follow what I said ;-)
>>>>>>> The M2 stack dump was fixed by running the command in Jason's e-mail
>>>>>>> from geronimo (not specs) trunk. I suspect you'd encounter it if you
>>>>>>> whacked both .maven and .m2 repositories and tried to build without
>>>>>>> running the M2 command from the geronimo (not specs) trunk.
>>>>>>>
>>>>>>> However, I'm still left with the problem that until Jason fixes the
>>>>>>> specs build to write to the M1 repo instead of the M2 repo, I have to
>>>>>>> manually copy over all the spec JARs from ~/.m2 to ~/.maven. I'm
>>>>>>> confused as to how this could be working for you if your geronimo and
>>>>>>> specs trunks are both up to date.
>>>>>>>
>>>>>>> But if you think I'm not following what you say, please try this:
>>>>>>>
>>>>>>> rm -rf ~/.maven
>>>>>>> rm -rf ~/.m2
>>>>>>> mkdir foo
>>>>>>> cd foo
>>>>>>> svn co https://svn.apache.org/repos/asf/geronimo/trunk geronimo
>>>>>>> svn co https://svn.apache.org/repos/asf/geronimo/specs/trunk
>>>>>>> geronimo-specs
>>>>>>> cd geronimo
>>>>>>> maven m:co (works)
>>>>>>> maven (fails)
>>>>>>> cd ../geronimo-specs
>>>>>>> mvn (fails)
>>>>>>> cd ../geronimo
>>>>>>> mvn -N install (works)
>>>>>>> maven (fails)
>>>>>>> cd ../geronimo-specs
>>>>>>> mvn (works)
>>>>>>> cd ../geronimo
>>>>>>> maven (fails)
>>>>>>>
>>>>>>> In other words, I ultimately got the specs to build, but nothing makes
>>>>>>> the Geronimo build work without manual artifact copying, as far as I
>>>>>>> can tell. Do you get a different result?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Aaron
>>>>>>>
>>>>>>>> I just did it again and it worked fine. I even wiped out my maven
>>>>>>>> repo
>>>>>>>> too to be sure.
>>>>>>>>
>>>>>>>> From what I can see...from your stack trace you ran M2. That was
>>>>>>>> your
>>>>>>>> problem. Just do a checkout of specs, as I explained below...in your
>>>>>>>> geronimo directory.
>>>>>>>>
>>>>>>>> Run the *old* maven, not the new one from the top of geronimo as you
>>>>>>>> normally did...and it will build fine.
>>>>>>>>
>>>>>>>> Jeff
>>>>>>>>
>>>>>>>> Aaron Mulder wrote:
>>>>>>>>> OK, so here's the flux for me:
>>>>>>>>>
>>>>>>>>> 1) I did an m:rebuild-all (probably the first mistake)
>>>>>>>>> 2) I can't build Geronimo offline because the specs are missing
>>>>>>>>> 3) I can't build Geronimo online because
>>>>>>>>> geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
>>>>>>>>> repos
>>>>>>>>> 4) I can't build the specs at all (when I run Maven 2 I get the big
>>>>>>>>> stack traces)
>>>>>>>>>
>>>>>>>>> I'll keep checking every now and then. In the mean time, if someone
>>>>>>>>> with a working specs module could sync it to the repo so at least
>>>>>>>>> there are binaries of all the specs online, that would get me going
>>>>>>>>> again.
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> Aaron
>>>>>>>>>
>>>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>>>> It must then be in a state of flux...this worked for me at 9AM
>>>>>>>>>> (on my
>>>>>>>>>> new powerbook - yay) this morning...so I suspect they are
>>>>>>>>>> working on it.
>>>>>>>>>>
>>>>>>>>>> Jeff
>>>>>>>>>>
>>>>>>>>>> Aaron Mulder wrote:
>>>>>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>>>>>> Aaron,
>>>>>>>>>>>>
>>>>>>>>>>>> I had the same issue...
>>>>>>>>>>>>
>>>>>>>>>>>> As a work around...go into your geronimo directory and issue
>>>>>>>>>>>> this (all
>>>>>>>>>>>> on one line):
>>>>>>>>>>>>
>>>>>>>>>>>> svn checkout
>>>>>>>>>>>> https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
>>>>>>>>>>>>
>>>>>>>>>>>> Then you should be able to build it all.
>>>>>>>>>>> Well, I did that, and when I tried to build that specs tree
>>>>>>>>>>> with Maven
>>>>>>>>>>> 2 I got the big Maven stack trace above. But I'll check it on IRC
>>>>>>>>>>> and/or later. Bad timing on my part, I guess. :)
>>>>>>>>>>>
>>>>>>>>>>> Aaron
>>>>>>>>>>>
>>>>>>>>>>>> Aaron Mulder wrote:
>>>>>>>>>>>>> So I tried a rebuild-all.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Geronimo won't build because the specs aren't there.
>>>>>>>>>>>>>
>>>>>>>>>>>>> The specs won't build because of the error below (is that saying
>>>>>>>>>>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
>>>>>>>>>>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do
>>>>>>>>>>>>> anything.
>>>>>>>>>>>>> :)
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>> Aaron
>>>>>>>>>>>>>
>>>>>>>>>>>>> [INFO] Scanning for projects...
>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>>>
>>>>>>>>>>>>> [ERROR] FATAL ERROR
>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>>>
>>>>>>>>>>>>> [INFO] Failed to resolve artifact.
>>>>>>>>>>>>>
>>>>>>>>>>>>> GroupId: org.apache.geronimo
>>>>>>>>>>>>> ArtifactId: geronimo
>>>>>>>>>>>>> Version: 1.0-SNAPSHOT
>>>>>>>>>>>>>
>>>>>>>>>>>>> Reason: Unable to download the artifact from any repository
>>>>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>>>>
>>>>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>>>
>>>>>>>>>>>>> [INFO] Trace
>>>>>>>>>>>>> org.apache.maven.reactor.MavenExecutionException: POM
>>>>>>>>>>>>> 'org.apache.geronimo:geronimo' not found in repository:
>>>>>>>>>>>>> Unable to
>>>>>>>>>>>>> download the artifact from any repository
>>>>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>>>>
>>>>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
>>>>>>>>>>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
>>>>>>>>>>>>> at
>>>>>>>>>>>>> sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>>>>>>>>>>>> at
>>>>>>>>>>>>> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at java.lang.reflect.Method.invoke(Method.java:324)
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.codehaus.classworlds.Launcher.main(Launcher.java:375)
>>>>>>>>>>>>> Caused by: org.apache.maven.project.ProjectBuildingException:
>>>>>>>>>>>>> POM
>>>>>>>>>>>>> 'org.apache.geronimo:geronimo' not found in repository:
>>>>>>>>>>>>> Unable to
>>>>>>>>>>>>> download the artifact from any repository
>>>>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>>>>
>>>>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
>>>>>>>>>>>>> ... 11 more
>>>>>>>>>>>>> Caused by:
>>>>>>>>>>>>> org.apache.maven.artifact.resolver.ArtifactNotFoundException:
>>>>>>>>>>>>> Unable to download the artifact from any repository
>>>>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>>>>
>>>>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
>>>>>>>>>>>>>
>>>>>>>>>>>>> ... 18 more
>>>>>>>>>>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
>>>>>>>>>>>>> Unable to download the artifact from any repository
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
>>>>>>>>>>>>>
>>>>>>>>>>>>> at
>>>>>>>>>>>>> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
>>>>>>>>>>>>>
>>>>>>>>>>>>> ... 20 more
>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>>>
>>>>>>>>>>>>> [INFO] Total time: < 1 second
>>>>>>>>>>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
>>>>>>>>>>>>> [INFO] Final Memory: 1M/2M
>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>>>>>>>> This is just the <sourceDirectory> and <testSourceDirectory>
>>>>>>>>>>>>>> parameters
>>>>>>>>>>>>>> in the <build> section of the pom, so we do not need to move
>>>>>>>>>>>>>> anything in
>>>>>>>>>>>>>> the interim, just add those declarations to point at our
>>>>>>>>>>>>>> locations.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Jeff
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Aaron Mulder wrote:
>>>>>>>>>>>>>>> Jason,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I guess this is really a Maven question, but... If I read
>>>>>>>>>>>>>>> that page
>>>>>>>>>>>>>>> right it says that what's now
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> geronimo/module-name/src/java
>>>>>>>>>>>>>>> geronimo/module-name/src/test
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Would need to change (for Maven 2) to
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> geronimo/module-name/src/main/java
>>>>>>>>>>>>>>> geronimo/module-name/src/test/java
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Is that correct? Is that easy to override so the former
>>>>>>>>>>>>>>> layout works
>>>>>>>>>>>>>>> for all the modules in one shot?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>> Aaron
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I've got all the specs builds working with Maven 2.x
>>>>>>>>>>>>>>>> except for the
>>>>>>>>>>>>>>>> corba module for which I need to whip up a quick plug-in
>>>>>>>>>>>>>>>> to deal with
>>>>>>>>>>>>>>>> IDL.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Are the specs built frequently because I see that you've
>>>>>>>>>>>>>>>> changed the
>>>>>>>>>>>>>>>> directory structure of the SVN repository and so many of
>>>>>>>>>>>>>>>> your references
>>>>>>>>>>>>>>>> like:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ../../etc/project.xml
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Won't work anymore unless I'm not seeing something.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> If I can get the specs building with Maven 2.x and get the
>>>>>>>>>>>>>>>> artifacts
>>>>>>>>>>>>>>>> produced into the m1 repository, and get the spec builds
>>>>>>>>>>>>>>>> running under
>>>>>>>>>>>>>>>> Continuum can I flip the spec builds over to Maven 2.x
>>>>>>>>>>>>>>>> standards and use
>>>>>>>>>>>>>>>> it as the default build? I figure that the specs don't
>>>>>>>>>>>>>>>> change that often
>>>>>>>>>>>>>>>> and is a good place to start if folks are interesting in
>>>>>>>>>>>>>>>> converting the
>>>>>>>>>>>>>>>> build over to Maven 2.x.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> This basically boils down to adhering to this:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> And getting a few tips about the corba module (Alan :-)).
>>>>>>>>>>>>>>>> Everything
>>>>>>>>>>>>>>>> else appears to be working.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> jvz.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Jason van Zyl
>>>>>>>>>>>>>>>> jason at maven.org
>>>>>>>>>>>>>>>> http://maven.apache.org
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> you are never dedicated to something you have complete
>>>>>>>>>>>>>>>> confidence in.
>>>>>>>>>>>>>>>> No one is fanatically shouting that the sun is going to
>>>>>>>>>>>>>>>> rise tomorrow.
>>>>>>>>>>>>>>>> They know it is going to rise tomorrow. When people are
>>>>>>>>>>>>>>>> fanatically
>>>>>>>>>>>>>>>> dedicated to political or religious faiths or any other
>>>>>>>>>>>>>>>> kind of
>>>>>>>>>>>>>>>> dogmas or goals, it's always because these dogmas or
>>>>>>>>>>>>>>>> goals are in doubt.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
Re: Building specs with Maven 2.x
Posted by Aaron Mulder <am...@alumni.princeton.edu>.
Jeff,
If you have a working build, can you send the missing
geronimo-spec-j2ee-jacc-1.0-rc5.jar to the Maven repo? I think you
can run "maven jar:deploy" from that spec directory.
Thanks,
Aaron
On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>
> Aaron,
>
> If you try maven 1.0.2 and it still fails, let me know and I am happy to
> recheck-in spec to our geronimo tree (of course with the permission of
> the team).
>
> Team,
>
> I propose we get this back in its old location, until its at least
> buildable for an m1 repo, since geronimo still depends on an m1
> repository. I am +1 on getting m2 poms for this, but it needs m1 as
> well. Until the geronimo trunk is converted over to an m2 repo, or we
> have scripts that copy spec from ibiblio m2 to m1 repos (regularly), we
> need to keep it in the geronimo trunk until the m1 component is fixed to
> live on its own.
>
> Comments?
>
> Jeff
>
> Jeff Genender wrote:
> > Ok...I guess the only difference between you and me is I used maven
> > 1.0.2 (I found a nasty bug in maven 1.1 so won't use it yet).
> >
> > I got a full build with 1.0.2. You may wish to try that.
> >
> > At least you got further...progress ;-)
> >
> > Jeff
> >
> > Aaron Mulder wrote:
> >> Well, when I tried checking out specs *into* geronimo, and building
> >> Geronimo with Maven 1.1-beta-2, I got the error below. When I move
> >> specs out again, the Geronimo build at least gets past the "calculate
> >> submodules" stage, and then fails with the missing dependency
> >> error(s). Not a good build day for me. :)
> >>
> >> Aaron
> >>
> >>
> >> maven -o
> >> __ __
> >> | \/ |__ _Apache__ ___
> >> | |\/| / _` \ V / -_) ' \ ~ intelligent projects ~
> >> |_| |_\__,_|\_/\___|_||_| v. 1.1-beta-2
> >>
> >> DEPRECATED: the default goal should be specified in the <build>
> >> section of project.xml instead of maven.xml
> >> DEPRECATED: the default goal should be specified in the <build>
> >> section of project.xml instead of maven.xml
> >> build:start:
> >>
> >> m:-all:
> >>
> >> m:init:
> >>
> >> m:default:
> >> multiproject:projects-init:
> >> [echo] Gathering project list
> >> Starting the reactor...
> >>
> >> BUILD FAILED
> >> File......
> >> /Users/ammulder/.maven/cache/maven-multiproject-plugin-1.4.1/plugin.jelly
> >> Element... maven:reactor
> >> Line...... 64
> >> Column.... -1
> >> Unknown error reading project
> >> Total time : 15 seconds
> >> Finished at : Saturday, October 29, 2005 8:44:34 PM EDT
> >>
> >> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
> >>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
> >>>> Hmm, after looking again, I notice that you're checkout out specs
> >>>> *into* your Geronimo directory -- I guess that's the difference.
> >>>>
> >>>> Aaron
> >>>>
> >>>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
> >>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >>>>>> I think the flux is that you didn't follow what I said ;-)
> >>>>> The M2 stack dump was fixed by running the command in Jason's e-mail
> >>>>> from geronimo (not specs) trunk. I suspect you'd encounter it if you
> >>>>> whacked both .maven and .m2 repositories and tried to build without
> >>>>> running the M2 command from the geronimo (not specs) trunk.
> >>>>>
> >>>>> However, I'm still left with the problem that until Jason fixes the
> >>>>> specs build to write to the M1 repo instead of the M2 repo, I have to
> >>>>> manually copy over all the spec JARs from ~/.m2 to ~/.maven. I'm
> >>>>> confused as to how this could be working for you if your geronimo and
> >>>>> specs trunks are both up to date.
> >>>>>
> >>>>> But if you think I'm not following what you say, please try this:
> >>>>>
> >>>>> rm -rf ~/.maven
> >>>>> rm -rf ~/.m2
> >>>>> mkdir foo
> >>>>> cd foo
> >>>>> svn co https://svn.apache.org/repos/asf/geronimo/trunk geronimo
> >>>>> svn co https://svn.apache.org/repos/asf/geronimo/specs/trunk
> >>>>> geronimo-specs
> >>>>> cd geronimo
> >>>>> maven m:co (works)
> >>>>> maven (fails)
> >>>>> cd ../geronimo-specs
> >>>>> mvn (fails)
> >>>>> cd ../geronimo
> >>>>> mvn -N install (works)
> >>>>> maven (fails)
> >>>>> cd ../geronimo-specs
> >>>>> mvn (works)
> >>>>> cd ../geronimo
> >>>>> maven (fails)
> >>>>>
> >>>>> In other words, I ultimately got the specs to build, but nothing makes
> >>>>> the Geronimo build work without manual artifact copying, as far as I
> >>>>> can tell. Do you get a different result?
> >>>>>
> >>>>> Thanks,
> >>>>> Aaron
> >>>>>
> >>>>>> I just did it again and it worked fine. I even wiped out my maven
> >>>>>> repo
> >>>>>> too to be sure.
> >>>>>>
> >>>>>> From what I can see...from your stack trace you ran M2. That was
> >>>>>> your
> >>>>>> problem. Just do a checkout of specs, as I explained below...in your
> >>>>>> geronimo directory.
> >>>>>>
> >>>>>> Run the *old* maven, not the new one from the top of geronimo as you
> >>>>>> normally did...and it will build fine.
> >>>>>>
> >>>>>> Jeff
> >>>>>>
> >>>>>> Aaron Mulder wrote:
> >>>>>>> OK, so here's the flux for me:
> >>>>>>>
> >>>>>>> 1) I did an m:rebuild-all (probably the first mistake)
> >>>>>>> 2) I can't build Geronimo offline because the specs are missing
> >>>>>>> 3) I can't build Geronimo online because
> >>>>>>> geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
> >>>>>>> repos
> >>>>>>> 4) I can't build the specs at all (when I run Maven 2 I get the big
> >>>>>>> stack traces)
> >>>>>>>
> >>>>>>> I'll keep checking every now and then. In the mean time, if someone
> >>>>>>> with a working specs module could sync it to the repo so at least
> >>>>>>> there are binaries of all the specs online, that would get me going
> >>>>>>> again.
> >>>>>>>
> >>>>>>> Thanks,
> >>>>>>> Aaron
> >>>>>>>
> >>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >>>>>>>> It must then be in a state of flux...this worked for me at 9AM
> >>>>>>>> (on my
> >>>>>>>> new powerbook - yay) this morning...so I suspect they are
> >>>>>>>> working on it.
> >>>>>>>>
> >>>>>>>> Jeff
> >>>>>>>>
> >>>>>>>> Aaron Mulder wrote:
> >>>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >>>>>>>>>> Aaron,
> >>>>>>>>>>
> >>>>>>>>>> I had the same issue...
> >>>>>>>>>>
> >>>>>>>>>> As a work around...go into your geronimo directory and issue
> >>>>>>>>>> this (all
> >>>>>>>>>> on one line):
> >>>>>>>>>>
> >>>>>>>>>> svn checkout
> >>>>>>>>>> https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
> >>>>>>>>>>
> >>>>>>>>>> Then you should be able to build it all.
> >>>>>>>>> Well, I did that, and when I tried to build that specs tree
> >>>>>>>>> with Maven
> >>>>>>>>> 2 I got the big Maven stack trace above. But I'll check it on IRC
> >>>>>>>>> and/or later. Bad timing on my part, I guess. :)
> >>>>>>>>>
> >>>>>>>>> Aaron
> >>>>>>>>>
> >>>>>>>>>> Aaron Mulder wrote:
> >>>>>>>>>>> So I tried a rebuild-all.
> >>>>>>>>>>>
> >>>>>>>>>>> Geronimo won't build because the specs aren't there.
> >>>>>>>>>>>
> >>>>>>>>>>> The specs won't build because of the error below (is that saying
> >>>>>>>>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
> >>>>>>>>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do
> >>>>>>>>>>> anything.
> >>>>>>>>>>> :)
> >>>>>>>>>>>
> >>>>>>>>>>> Thanks,
> >>>>>>>>>>> Aaron
> >>>>>>>>>>>
> >>>>>>>>>>> [INFO] Scanning for projects...
> >>>>>>>>>>> [INFO]
> >>>>>>>>>>> ----------------------------------------------------------------------------
> >>>>>>>>>>>
> >>>>>>>>>>> [ERROR] FATAL ERROR
> >>>>>>>>>>> [INFO]
> >>>>>>>>>>> ----------------------------------------------------------------------------
> >>>>>>>>>>>
> >>>>>>>>>>> [INFO] Failed to resolve artifact.
> >>>>>>>>>>>
> >>>>>>>>>>> GroupId: org.apache.geronimo
> >>>>>>>>>>> ArtifactId: geronimo
> >>>>>>>>>>> Version: 1.0-SNAPSHOT
> >>>>>>>>>>>
> >>>>>>>>>>> Reason: Unable to download the artifact from any repository
> >>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>>>>>>>>>
> >>>>>>>>>>> from the specified remote repositories:
> >>>>>>>>>>> central (http://repo1.maven.org/maven2)
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> [INFO]
> >>>>>>>>>>> ----------------------------------------------------------------------------
> >>>>>>>>>>>
> >>>>>>>>>>> [INFO] Trace
> >>>>>>>>>>> org.apache.maven.reactor.MavenExecutionException: POM
> >>>>>>>>>>> 'org.apache.geronimo:geronimo' not found in repository:
> >>>>>>>>>>> Unable to
> >>>>>>>>>>> download the artifact from any repository
> >>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>>>>>>>>>
> >>>>>>>>>>> from the specified remote repositories:
> >>>>>>>>>>> central (http://repo1.maven.org/maven2)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
> >>>>>>>>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> >>>>>>>>>>> at
> >>>>>>>>>>> sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> >>>>>>>>>>> at
> >>>>>>>>>>> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> >>>>>>>>>>>
> >>>>>>>>>>> at java.lang.reflect.Method.invoke(Method.java:324)
> >>>>>>>>>>> at
> >>>>>>>>>>> org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> >>>>>>>>>>> at
> >>>>>>>>>>> org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> >>>>>>>>>>> Caused by: org.apache.maven.project.ProjectBuildingException:
> >>>>>>>>>>> POM
> >>>>>>>>>>> 'org.apache.geronimo:geronimo' not found in repository:
> >>>>>>>>>>> Unable to
> >>>>>>>>>>> download the artifact from any repository
> >>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>>>>>>>>>
> >>>>>>>>>>> from the specified remote repositories:
> >>>>>>>>>>> central (http://repo1.maven.org/maven2)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
> >>>>>>>>>>> ... 11 more
> >>>>>>>>>>> Caused by:
> >>>>>>>>>>> org.apache.maven.artifact.resolver.ArtifactNotFoundException:
> >>>>>>>>>>> Unable to download the artifact from any repository
> >>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>>>>>>>>>
> >>>>>>>>>>> from the specified remote repositories:
> >>>>>>>>>>> central (http://repo1.maven.org/maven2)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
> >>>>>>>>>>>
> >>>>>>>>>>> ... 18 more
> >>>>>>>>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
> >>>>>>>>>>> Unable to download the artifact from any repository
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
> >>>>>>>>>>>
> >>>>>>>>>>> at
> >>>>>>>>>>> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
> >>>>>>>>>>>
> >>>>>>>>>>> ... 20 more
> >>>>>>>>>>> [INFO]
> >>>>>>>>>>> ----------------------------------------------------------------------------
> >>>>>>>>>>>
> >>>>>>>>>>> [INFO] Total time: < 1 second
> >>>>>>>>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
> >>>>>>>>>>> [INFO] Final Memory: 1M/2M
> >>>>>>>>>>> [INFO]
> >>>>>>>>>>> ----------------------------------------------------------------------------
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >>>>>>>>>>>> This is just the <sourceDirectory> and <testSourceDirectory>
> >>>>>>>>>>>> parameters
> >>>>>>>>>>>> in the <build> section of the pom, so we do not need to move
> >>>>>>>>>>>> anything in
> >>>>>>>>>>>> the interim, just add those declarations to point at our
> >>>>>>>>>>>> locations.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Jeff
> >>>>>>>>>>>>
> >>>>>>>>>>>> Aaron Mulder wrote:
> >>>>>>>>>>>>> Jason,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> I guess this is really a Maven question, but... If I read
> >>>>>>>>>>>>> that page
> >>>>>>>>>>>>> right it says that what's now
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> geronimo/module-name/src/java
> >>>>>>>>>>>>> geronimo/module-name/src/test
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Would need to change (for Maven 2) to
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> geronimo/module-name/src/main/java
> >>>>>>>>>>>>> geronimo/module-name/src/test/java
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Is that correct? Is that easy to override so the former
> >>>>>>>>>>>>> layout works
> >>>>>>>>>>>>> for all the modules in one shot?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>> Aaron
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
> >>>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> I've got all the specs builds working with Maven 2.x
> >>>>>>>>>>>>>> except for the
> >>>>>>>>>>>>>> corba module for which I need to whip up a quick plug-in
> >>>>>>>>>>>>>> to deal with
> >>>>>>>>>>>>>> IDL.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Are the specs built frequently because I see that you've
> >>>>>>>>>>>>>> changed the
> >>>>>>>>>>>>>> directory structure of the SVN repository and so many of
> >>>>>>>>>>>>>> your references
> >>>>>>>>>>>>>> like:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> ../../etc/project.xml
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Won't work anymore unless I'm not seeing something.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> If I can get the specs building with Maven 2.x and get the
> >>>>>>>>>>>>>> artifacts
> >>>>>>>>>>>>>> produced into the m1 repository, and get the spec builds
> >>>>>>>>>>>>>> running under
> >>>>>>>>>>>>>> Continuum can I flip the spec builds over to Maven 2.x
> >>>>>>>>>>>>>> standards and use
> >>>>>>>>>>>>>> it as the default build? I figure that the specs don't
> >>>>>>>>>>>>>> change that often
> >>>>>>>>>>>>>> and is a good place to start if folks are interesting in
> >>>>>>>>>>>>>> converting the
> >>>>>>>>>>>>>> build over to Maven 2.x.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> This basically boils down to adhering to this:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> And getting a few tips about the corba module (Alan :-)).
> >>>>>>>>>>>>>> Everything
> >>>>>>>>>>>>>> else appears to be working.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> --
> >>>>>>>>>>>>>> jvz.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Jason van Zyl
> >>>>>>>>>>>>>> jason at maven.org
> >>>>>>>>>>>>>> http://maven.apache.org
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> you are never dedicated to something you have complete
> >>>>>>>>>>>>>> confidence in.
> >>>>>>>>>>>>>> No one is fanatically shouting that the sun is going to
> >>>>>>>>>>>>>> rise tomorrow.
> >>>>>>>>>>>>>> They know it is going to rise tomorrow. When people are
> >>>>>>>>>>>>>> fanatically
> >>>>>>>>>>>>>> dedicated to political or religious faiths or any other
> >>>>>>>>>>>>>> kind of
> >>>>>>>>>>>>>> dogmas or goals, it's always because these dogmas or
> >>>>>>>>>>>>>> goals are in doubt.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
>
Re: Building specs with Maven 2.x
Posted by Jeff Genender <jg...@savoirtech.com>.
Aaron,
If you try maven 1.0.2 and it still fails, let me know and I am happy to
recheck-in spec to our geronimo tree (of course with the permission of
the team).
Team,
I propose we get this back in its old location, until its at least
buildable for an m1 repo, since geronimo still depends on an m1
repository. I am +1 on getting m2 poms for this, but it needs m1 as
well. Until the geronimo trunk is converted over to an m2 repo, or we
have scripts that copy spec from ibiblio m2 to m1 repos (regularly), we
need to keep it in the geronimo trunk until the m1 component is fixed to
live on its own.
Comments?
Jeff
Jeff Genender wrote:
> Ok...I guess the only difference between you and me is I used maven
> 1.0.2 (I found a nasty bug in maven 1.1 so won't use it yet).
>
> I got a full build with 1.0.2. You may wish to try that.
>
> At least you got further...progress ;-)
>
> Jeff
>
> Aaron Mulder wrote:
>> Well, when I tried checking out specs *into* geronimo, and building
>> Geronimo with Maven 1.1-beta-2, I got the error below. When I move
>> specs out again, the Geronimo build at least gets past the "calculate
>> submodules" stage, and then fails with the missing dependency
>> error(s). Not a good build day for me. :)
>>
>> Aaron
>>
>>
>> maven -o
>> __ __
>> | \/ |__ _Apache__ ___
>> | |\/| / _` \ V / -_) ' \ ~ intelligent projects ~
>> |_| |_\__,_|\_/\___|_||_| v. 1.1-beta-2
>>
>> DEPRECATED: the default goal should be specified in the <build>
>> section of project.xml instead of maven.xml
>> DEPRECATED: the default goal should be specified in the <build>
>> section of project.xml instead of maven.xml
>> build:start:
>>
>> m:-all:
>>
>> m:init:
>>
>> m:default:
>> multiproject:projects-init:
>> [echo] Gathering project list
>> Starting the reactor...
>>
>> BUILD FAILED
>> File......
>> /Users/ammulder/.maven/cache/maven-multiproject-plugin-1.4.1/plugin.jelly
>> Element... maven:reactor
>> Line...... 64
>> Column.... -1
>> Unknown error reading project
>> Total time : 15 seconds
>> Finished at : Saturday, October 29, 2005 8:44:34 PM EDT
>>
>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
>>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
>>>> Hmm, after looking again, I notice that you're checkout out specs
>>>> *into* your Geronimo directory -- I guess that's the difference.
>>>>
>>>> Aaron
>>>>
>>>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>> I think the flux is that you didn't follow what I said ;-)
>>>>> The M2 stack dump was fixed by running the command in Jason's e-mail
>>>>> from geronimo (not specs) trunk. I suspect you'd encounter it if you
>>>>> whacked both .maven and .m2 repositories and tried to build without
>>>>> running the M2 command from the geronimo (not specs) trunk.
>>>>>
>>>>> However, I'm still left with the problem that until Jason fixes the
>>>>> specs build to write to the M1 repo instead of the M2 repo, I have to
>>>>> manually copy over all the spec JARs from ~/.m2 to ~/.maven. I'm
>>>>> confused as to how this could be working for you if your geronimo and
>>>>> specs trunks are both up to date.
>>>>>
>>>>> But if you think I'm not following what you say, please try this:
>>>>>
>>>>> rm -rf ~/.maven
>>>>> rm -rf ~/.m2
>>>>> mkdir foo
>>>>> cd foo
>>>>> svn co https://svn.apache.org/repos/asf/geronimo/trunk geronimo
>>>>> svn co https://svn.apache.org/repos/asf/geronimo/specs/trunk
>>>>> geronimo-specs
>>>>> cd geronimo
>>>>> maven m:co (works)
>>>>> maven (fails)
>>>>> cd ../geronimo-specs
>>>>> mvn (fails)
>>>>> cd ../geronimo
>>>>> mvn -N install (works)
>>>>> maven (fails)
>>>>> cd ../geronimo-specs
>>>>> mvn (works)
>>>>> cd ../geronimo
>>>>> maven (fails)
>>>>>
>>>>> In other words, I ultimately got the specs to build, but nothing makes
>>>>> the Geronimo build work without manual artifact copying, as far as I
>>>>> can tell. Do you get a different result?
>>>>>
>>>>> Thanks,
>>>>> Aaron
>>>>>
>>>>>> I just did it again and it worked fine. I even wiped out my maven
>>>>>> repo
>>>>>> too to be sure.
>>>>>>
>>>>>> From what I can see...from your stack trace you ran M2. That was
>>>>>> your
>>>>>> problem. Just do a checkout of specs, as I explained below...in your
>>>>>> geronimo directory.
>>>>>>
>>>>>> Run the *old* maven, not the new one from the top of geronimo as you
>>>>>> normally did...and it will build fine.
>>>>>>
>>>>>> Jeff
>>>>>>
>>>>>> Aaron Mulder wrote:
>>>>>>> OK, so here's the flux for me:
>>>>>>>
>>>>>>> 1) I did an m:rebuild-all (probably the first mistake)
>>>>>>> 2) I can't build Geronimo offline because the specs are missing
>>>>>>> 3) I can't build Geronimo online because
>>>>>>> geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
>>>>>>> repos
>>>>>>> 4) I can't build the specs at all (when I run Maven 2 I get the big
>>>>>>> stack traces)
>>>>>>>
>>>>>>> I'll keep checking every now and then. In the mean time, if someone
>>>>>>> with a working specs module could sync it to the repo so at least
>>>>>>> there are binaries of all the specs online, that would get me going
>>>>>>> again.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Aaron
>>>>>>>
>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>> It must then be in a state of flux...this worked for me at 9AM
>>>>>>>> (on my
>>>>>>>> new powerbook - yay) this morning...so I suspect they are
>>>>>>>> working on it.
>>>>>>>>
>>>>>>>> Jeff
>>>>>>>>
>>>>>>>> Aaron Mulder wrote:
>>>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>>>> Aaron,
>>>>>>>>>>
>>>>>>>>>> I had the same issue...
>>>>>>>>>>
>>>>>>>>>> As a work around...go into your geronimo directory and issue
>>>>>>>>>> this (all
>>>>>>>>>> on one line):
>>>>>>>>>>
>>>>>>>>>> svn checkout
>>>>>>>>>> https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
>>>>>>>>>>
>>>>>>>>>> Then you should be able to build it all.
>>>>>>>>> Well, I did that, and when I tried to build that specs tree
>>>>>>>>> with Maven
>>>>>>>>> 2 I got the big Maven stack trace above. But I'll check it on IRC
>>>>>>>>> and/or later. Bad timing on my part, I guess. :)
>>>>>>>>>
>>>>>>>>> Aaron
>>>>>>>>>
>>>>>>>>>> Aaron Mulder wrote:
>>>>>>>>>>> So I tried a rebuild-all.
>>>>>>>>>>>
>>>>>>>>>>> Geronimo won't build because the specs aren't there.
>>>>>>>>>>>
>>>>>>>>>>> The specs won't build because of the error below (is that saying
>>>>>>>>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
>>>>>>>>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do
>>>>>>>>>>> anything.
>>>>>>>>>>> :)
>>>>>>>>>>>
>>>>>>>>>>> Thanks,
>>>>>>>>>>> Aaron
>>>>>>>>>>>
>>>>>>>>>>> [INFO] Scanning for projects...
>>>>>>>>>>> [INFO]
>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>
>>>>>>>>>>> [ERROR] FATAL ERROR
>>>>>>>>>>> [INFO]
>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>
>>>>>>>>>>> [INFO] Failed to resolve artifact.
>>>>>>>>>>>
>>>>>>>>>>> GroupId: org.apache.geronimo
>>>>>>>>>>> ArtifactId: geronimo
>>>>>>>>>>> Version: 1.0-SNAPSHOT
>>>>>>>>>>>
>>>>>>>>>>> Reason: Unable to download the artifact from any repository
>>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>>
>>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> [INFO]
>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>
>>>>>>>>>>> [INFO] Trace
>>>>>>>>>>> org.apache.maven.reactor.MavenExecutionException: POM
>>>>>>>>>>> 'org.apache.geronimo:geronimo' not found in repository:
>>>>>>>>>>> Unable to
>>>>>>>>>>> download the artifact from any repository
>>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>>
>>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
>>>>>>>>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
>>>>>>>>>>> at
>>>>>>>>>>> sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>>>>>>>>>> at
>>>>>>>>>>> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>>>>>>>>>>
>>>>>>>>>>> at java.lang.reflect.Method.invoke(Method.java:324)
>>>>>>>>>>> at
>>>>>>>>>>> org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
>>>>>>>>>>> at
>>>>>>>>>>> org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.codehaus.classworlds.Launcher.main(Launcher.java:375)
>>>>>>>>>>> Caused by: org.apache.maven.project.ProjectBuildingException:
>>>>>>>>>>> POM
>>>>>>>>>>> 'org.apache.geronimo:geronimo' not found in repository:
>>>>>>>>>>> Unable to
>>>>>>>>>>> download the artifact from any repository
>>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>>
>>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
>>>>>>>>>>> ... 11 more
>>>>>>>>>>> Caused by:
>>>>>>>>>>> org.apache.maven.artifact.resolver.ArtifactNotFoundException:
>>>>>>>>>>> Unable to download the artifact from any repository
>>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>>
>>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
>>>>>>>>>>>
>>>>>>>>>>> ... 18 more
>>>>>>>>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
>>>>>>>>>>> Unable to download the artifact from any repository
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
>>>>>>>>>>>
>>>>>>>>>>> at
>>>>>>>>>>> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
>>>>>>>>>>>
>>>>>>>>>>> ... 20 more
>>>>>>>>>>> [INFO]
>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>
>>>>>>>>>>> [INFO] Total time: < 1 second
>>>>>>>>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
>>>>>>>>>>> [INFO] Final Memory: 1M/2M
>>>>>>>>>>> [INFO]
>>>>>>>>>>> ----------------------------------------------------------------------------
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>>>>>> This is just the <sourceDirectory> and <testSourceDirectory>
>>>>>>>>>>>> parameters
>>>>>>>>>>>> in the <build> section of the pom, so we do not need to move
>>>>>>>>>>>> anything in
>>>>>>>>>>>> the interim, just add those declarations to point at our
>>>>>>>>>>>> locations.
>>>>>>>>>>>>
>>>>>>>>>>>> Jeff
>>>>>>>>>>>>
>>>>>>>>>>>> Aaron Mulder wrote:
>>>>>>>>>>>>> Jason,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I guess this is really a Maven question, but... If I read
>>>>>>>>>>>>> that page
>>>>>>>>>>>>> right it says that what's now
>>>>>>>>>>>>>
>>>>>>>>>>>>> geronimo/module-name/src/java
>>>>>>>>>>>>> geronimo/module-name/src/test
>>>>>>>>>>>>>
>>>>>>>>>>>>> Would need to change (for Maven 2) to
>>>>>>>>>>>>>
>>>>>>>>>>>>> geronimo/module-name/src/main/java
>>>>>>>>>>>>> geronimo/module-name/src/test/java
>>>>>>>>>>>>>
>>>>>>>>>>>>> Is that correct? Is that easy to override so the former
>>>>>>>>>>>>> layout works
>>>>>>>>>>>>> for all the modules in one shot?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>> Aaron
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I've got all the specs builds working with Maven 2.x
>>>>>>>>>>>>>> except for the
>>>>>>>>>>>>>> corba module for which I need to whip up a quick plug-in
>>>>>>>>>>>>>> to deal with
>>>>>>>>>>>>>> IDL.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Are the specs built frequently because I see that you've
>>>>>>>>>>>>>> changed the
>>>>>>>>>>>>>> directory structure of the SVN repository and so many of
>>>>>>>>>>>>>> your references
>>>>>>>>>>>>>> like:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ../../etc/project.xml
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Won't work anymore unless I'm not seeing something.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> If I can get the specs building with Maven 2.x and get the
>>>>>>>>>>>>>> artifacts
>>>>>>>>>>>>>> produced into the m1 repository, and get the spec builds
>>>>>>>>>>>>>> running under
>>>>>>>>>>>>>> Continuum can I flip the spec builds over to Maven 2.x
>>>>>>>>>>>>>> standards and use
>>>>>>>>>>>>>> it as the default build? I figure that the specs don't
>>>>>>>>>>>>>> change that often
>>>>>>>>>>>>>> and is a good place to start if folks are interesting in
>>>>>>>>>>>>>> converting the
>>>>>>>>>>>>>> build over to Maven 2.x.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This basically boils down to adhering to this:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> And getting a few tips about the corba module (Alan :-)).
>>>>>>>>>>>>>> Everything
>>>>>>>>>>>>>> else appears to be working.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> jvz.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Jason van Zyl
>>>>>>>>>>>>>> jason at maven.org
>>>>>>>>>>>>>> http://maven.apache.org
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> you are never dedicated to something you have complete
>>>>>>>>>>>>>> confidence in.
>>>>>>>>>>>>>> No one is fanatically shouting that the sun is going to
>>>>>>>>>>>>>> rise tomorrow.
>>>>>>>>>>>>>> They know it is going to rise tomorrow. When people are
>>>>>>>>>>>>>> fanatically
>>>>>>>>>>>>>> dedicated to political or religious faiths or any other
>>>>>>>>>>>>>> kind of
>>>>>>>>>>>>>> dogmas or goals, it's always because these dogmas or
>>>>>>>>>>>>>> goals are in doubt.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
Re: Building specs with Maven 2.x
Posted by Jeff Genender <jg...@savoirtech.com>.
Ok...I guess the only difference between you and me is I used maven
1.0.2 (I found a nasty bug in maven 1.1 so won't use it yet).
I got a full build with 1.0.2. You may wish to try that.
At least you got further...progress ;-)
Jeff
Aaron Mulder wrote:
> Well, when I tried checking out specs *into* geronimo, and building
> Geronimo with Maven 1.1-beta-2, I got the error below. When I move
> specs out again, the Geronimo build at least gets past the "calculate
> submodules" stage, and then fails with the missing dependency
> error(s). Not a good build day for me. :)
>
> Aaron
>
>
> maven -o
> __ __
> | \/ |__ _Apache__ ___
> | |\/| / _` \ V / -_) ' \ ~ intelligent projects ~
> |_| |_\__,_|\_/\___|_||_| v. 1.1-beta-2
>
> DEPRECATED: the default goal should be specified in the <build>
> section of project.xml instead of maven.xml
> DEPRECATED: the default goal should be specified in the <build>
> section of project.xml instead of maven.xml
> build:start:
>
> m:-all:
>
> m:init:
>
> m:default:
> multiproject:projects-init:
> [echo] Gathering project list
> Starting the reactor...
>
> BUILD FAILED
> File...... /Users/ammulder/.maven/cache/maven-multiproject-plugin-1.4.1/plugin.jelly
> Element... maven:reactor
> Line...... 64
> Column.... -1
> Unknown error reading project
> Total time : 15 seconds
> Finished at : Saturday, October 29, 2005 8:44:34 PM EDT
>
> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
>>> Hmm, after looking again, I notice that you're checkout out specs
>>> *into* your Geronimo directory -- I guess that's the difference.
>>>
>>> Aaron
>>>
>>> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>> I think the flux is that you didn't follow what I said ;-)
>>>> The M2 stack dump was fixed by running the command in Jason's e-mail
>>>> from geronimo (not specs) trunk. I suspect you'd encounter it if you
>>>> whacked both .maven and .m2 repositories and tried to build without
>>>> running the M2 command from the geronimo (not specs) trunk.
>>>>
>>>> However, I'm still left with the problem that until Jason fixes the
>>>> specs build to write to the M1 repo instead of the M2 repo, I have to
>>>> manually copy over all the spec JARs from ~/.m2 to ~/.maven. I'm
>>>> confused as to how this could be working for you if your geronimo and
>>>> specs trunks are both up to date.
>>>>
>>>> But if you think I'm not following what you say, please try this:
>>>>
>>>> rm -rf ~/.maven
>>>> rm -rf ~/.m2
>>>> mkdir foo
>>>> cd foo
>>>> svn co https://svn.apache.org/repos/asf/geronimo/trunk geronimo
>>>> svn co https://svn.apache.org/repos/asf/geronimo/specs/trunk geronimo-specs
>>>> cd geronimo
>>>> maven m:co (works)
>>>> maven (fails)
>>>> cd ../geronimo-specs
>>>> mvn (fails)
>>>> cd ../geronimo
>>>> mvn -N install (works)
>>>> maven (fails)
>>>> cd ../geronimo-specs
>>>> mvn (works)
>>>> cd ../geronimo
>>>> maven (fails)
>>>>
>>>> In other words, I ultimately got the specs to build, but nothing makes
>>>> the Geronimo build work without manual artifact copying, as far as I
>>>> can tell. Do you get a different result?
>>>>
>>>> Thanks,
>>>> Aaron
>>>>
>>>>> I just did it again and it worked fine. I even wiped out my maven repo
>>>>> too to be sure.
>>>>>
>>>>> From what I can see...from your stack trace you ran M2. That was your
>>>>> problem. Just do a checkout of specs, as I explained below...in your
>>>>> geronimo directory.
>>>>>
>>>>> Run the *old* maven, not the new one from the top of geronimo as you
>>>>> normally did...and it will build fine.
>>>>>
>>>>> Jeff
>>>>>
>>>>> Aaron Mulder wrote:
>>>>>> OK, so here's the flux for me:
>>>>>>
>>>>>> 1) I did an m:rebuild-all (probably the first mistake)
>>>>>> 2) I can't build Geronimo offline because the specs are missing
>>>>>> 3) I can't build Geronimo online because
>>>>>> geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
>>>>>> repos
>>>>>> 4) I can't build the specs at all (when I run Maven 2 I get the big
>>>>>> stack traces)
>>>>>>
>>>>>> I'll keep checking every now and then. In the mean time, if someone
>>>>>> with a working specs module could sync it to the repo so at least
>>>>>> there are binaries of all the specs online, that would get me going
>>>>>> again.
>>>>>>
>>>>>> Thanks,
>>>>>> Aaron
>>>>>>
>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>> It must then be in a state of flux...this worked for me at 9AM (on my
>>>>>>> new powerbook - yay) this morning...so I suspect they are working on it.
>>>>>>>
>>>>>>> Jeff
>>>>>>>
>>>>>>> Aaron Mulder wrote:
>>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>>> Aaron,
>>>>>>>>>
>>>>>>>>> I had the same issue...
>>>>>>>>>
>>>>>>>>> As a work around...go into your geronimo directory and issue this (all
>>>>>>>>> on one line):
>>>>>>>>>
>>>>>>>>> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
>>>>>>>>>
>>>>>>>>> Then you should be able to build it all.
>>>>>>>> Well, I did that, and when I tried to build that specs tree with Maven
>>>>>>>> 2 I got the big Maven stack trace above. But I'll check it on IRC
>>>>>>>> and/or later. Bad timing on my part, I guess. :)
>>>>>>>>
>>>>>>>> Aaron
>>>>>>>>
>>>>>>>>> Aaron Mulder wrote:
>>>>>>>>>> So I tried a rebuild-all.
>>>>>>>>>>
>>>>>>>>>> Geronimo won't build because the specs aren't there.
>>>>>>>>>>
>>>>>>>>>> The specs won't build because of the error below (is that saying
>>>>>>>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
>>>>>>>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
>>>>>>>>>> :)
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> Aaron
>>>>>>>>>>
>>>>>>>>>> [INFO] Scanning for projects...
>>>>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>>>>> [ERROR] FATAL ERROR
>>>>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>>>>> [INFO] Failed to resolve artifact.
>>>>>>>>>>
>>>>>>>>>> GroupId: org.apache.geronimo
>>>>>>>>>> ArtifactId: geronimo
>>>>>>>>>> Version: 1.0-SNAPSHOT
>>>>>>>>>>
>>>>>>>>>> Reason: Unable to download the artifact from any repository
>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>
>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>>>>> [INFO] Trace
>>>>>>>>>> org.apache.maven.reactor.MavenExecutionException: POM
>>>>>>>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
>>>>>>>>>> download the artifact from any repository
>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>
>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>
>>>>>>>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
>>>>>>>>>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
>>>>>>>>>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
>>>>>>>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
>>>>>>>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>>>>>>>>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>>>>>>>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>>>>>>>>> at java.lang.reflect.Method.invoke(Method.java:324)
>>>>>>>>>> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
>>>>>>>>>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
>>>>>>>>>> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
>>>>>>>>>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
>>>>>>>>>> Caused by: org.apache.maven.project.ProjectBuildingException: POM
>>>>>>>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
>>>>>>>>>> download the artifact from any repository
>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>
>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>
>>>>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
>>>>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
>>>>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
>>>>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
>>>>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
>>>>>>>>>> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
>>>>>>>>>> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
>>>>>>>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
>>>>>>>>>> ... 11 more
>>>>>>>>>> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
>>>>>>>>>> Unable to download the artifact from any repository
>>>>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>>>>
>>>>>>>>>> from the specified remote repositories:
>>>>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>>>>
>>>>>>>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
>>>>>>>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
>>>>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
>>>>>>>>>> ... 18 more
>>>>>>>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
>>>>>>>>>> Unable to download the artifact from any repository
>>>>>>>>>> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
>>>>>>>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
>>>>>>>>>> ... 20 more
>>>>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>>>>> [INFO] Total time: < 1 second
>>>>>>>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
>>>>>>>>>> [INFO] Final Memory: 1M/2M
>>>>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>>>>>
>>>>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>>>>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
>>>>>>>>>>> in the <build> section of the pom, so we do not need to move anything in
>>>>>>>>>>> the interim, just add those declarations to point at our locations.
>>>>>>>>>>>
>>>>>>>>>>> Jeff
>>>>>>>>>>>
>>>>>>>>>>> Aaron Mulder wrote:
>>>>>>>>>>>> Jason,
>>>>>>>>>>>>
>>>>>>>>>>>> I guess this is really a Maven question, but... If I read that page
>>>>>>>>>>>> right it says that what's now
>>>>>>>>>>>>
>>>>>>>>>>>> geronimo/module-name/src/java
>>>>>>>>>>>> geronimo/module-name/src/test
>>>>>>>>>>>>
>>>>>>>>>>>> Would need to change (for Maven 2) to
>>>>>>>>>>>>
>>>>>>>>>>>> geronimo/module-name/src/main/java
>>>>>>>>>>>> geronimo/module-name/src/test/java
>>>>>>>>>>>>
>>>>>>>>>>>> Is that correct? Is that easy to override so the former layout works
>>>>>>>>>>>> for all the modules in one shot?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>> Aaron
>>>>>>>>>>>>
>>>>>>>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I've got all the specs builds working with Maven 2.x except for the
>>>>>>>>>>>>> corba module for which I need to whip up a quick plug-in to deal with
>>>>>>>>>>>>> IDL.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Are the specs built frequently because I see that you've changed the
>>>>>>>>>>>>> directory structure of the SVN repository and so many of your references
>>>>>>>>>>>>> like:
>>>>>>>>>>>>>
>>>>>>>>>>>>> ../../etc/project.xml
>>>>>>>>>>>>>
>>>>>>>>>>>>> Won't work anymore unless I'm not seeing something.
>>>>>>>>>>>>>
>>>>>>>>>>>>> If I can get the specs building with Maven 2.x and get the artifacts
>>>>>>>>>>>>> produced into the m1 repository, and get the spec builds running under
>>>>>>>>>>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
>>>>>>>>>>>>> it as the default build? I figure that the specs don't change that often
>>>>>>>>>>>>> and is a good place to start if folks are interesting in converting the
>>>>>>>>>>>>> build over to Maven 2.x.
>>>>>>>>>>>>>
>>>>>>>>>>>>> This basically boils down to adhering to this:
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
>>>>>>>>>>>>>
>>>>>>>>>>>>> And getting a few tips about the corba module (Alan :-)). Everything
>>>>>>>>>>>>> else appears to be working.
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> jvz.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Jason van Zyl
>>>>>>>>>>>>> jason at maven.org
>>>>>>>>>>>>> http://maven.apache.org
>>>>>>>>>>>>>
>>>>>>>>>>>>> you are never dedicated to something you have complete confidence in.
>>>>>>>>>>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
>>>>>>>>>>>>> They know it is going to rise tomorrow. When people are fanatically
>>>>>>>>>>>>> dedicated to political or religious faiths or any other kind of
>>>>>>>>>>>>> dogmas or goals, it's always because these dogmas or
>>>>>>>>>>>>> goals are in doubt.
>>>>>>>>>>>>>
>>>>>>>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>>>>>>>>>>>>>
>>>>>>>>>>>>>
Re: Building specs with Maven 2.x
Posted by Aaron Mulder <am...@alumni.princeton.edu>.
Well, when I tried checking out specs *into* geronimo, and building
Geronimo with Maven 1.1-beta-2, I got the error below. When I move
specs out again, the Geronimo build at least gets past the "calculate
submodules" stage, and then fails with the missing dependency
error(s). Not a good build day for me. :)
Aaron
maven -o
__ __
| \/ |__ _Apache__ ___
| |\/| / _` \ V / -_) ' \ ~ intelligent projects ~
|_| |_\__,_|\_/\___|_||_| v. 1.1-beta-2
DEPRECATED: the default goal should be specified in the <build>
section of project.xml instead of maven.xml
DEPRECATED: the default goal should be specified in the <build>
section of project.xml instead of maven.xml
build:start:
m:-all:
m:init:
m:default:
multiproject:projects-init:
[echo] Gathering project list
Starting the reactor...
BUILD FAILED
File...... /Users/ammulder/.maven/cache/maven-multiproject-plugin-1.4.1/plugin.jelly
Element... maven:reactor
Line...... 64
Column.... -1
Unknown error reading project
Total time : 15 seconds
Finished at : Saturday, October 29, 2005 8:44:34 PM EDT
On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
> > Hmm, after looking again, I notice that you're checkout out specs
> > *into* your Geronimo directory -- I guess that's the difference.
> >
> > Aaron
> >
> > On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
> > > On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > > > I think the flux is that you didn't follow what I said ;-)
> > >
> > > The M2 stack dump was fixed by running the command in Jason's e-mail
> > > from geronimo (not specs) trunk. I suspect you'd encounter it if you
> > > whacked both .maven and .m2 repositories and tried to build without
> > > running the M2 command from the geronimo (not specs) trunk.
> > >
> > > However, I'm still left with the problem that until Jason fixes the
> > > specs build to write to the M1 repo instead of the M2 repo, I have to
> > > manually copy over all the spec JARs from ~/.m2 to ~/.maven. I'm
> > > confused as to how this could be working for you if your geronimo and
> > > specs trunks are both up to date.
> > >
> > > But if you think I'm not following what you say, please try this:
> > >
> > > rm -rf ~/.maven
> > > rm -rf ~/.m2
> > > mkdir foo
> > > cd foo
> > > svn co https://svn.apache.org/repos/asf/geronimo/trunk geronimo
> > > svn co https://svn.apache.org/repos/asf/geronimo/specs/trunk geronimo-specs
> > > cd geronimo
> > > maven m:co (works)
> > > maven (fails)
> > > cd ../geronimo-specs
> > > mvn (fails)
> > > cd ../geronimo
> > > mvn -N install (works)
> > > maven (fails)
> > > cd ../geronimo-specs
> > > mvn (works)
> > > cd ../geronimo
> > > maven (fails)
> > >
> > > In other words, I ultimately got the specs to build, but nothing makes
> > > the Geronimo build work without manual artifact copying, as far as I
> > > can tell. Do you get a different result?
> > >
> > > Thanks,
> > > Aaron
> > >
> > > >
> > > > I just did it again and it worked fine. I even wiped out my maven repo
> > > > too to be sure.
> > > >
> > > > From what I can see...from your stack trace you ran M2. That was your
> > > > problem. Just do a checkout of specs, as I explained below...in your
> > > > geronimo directory.
> > > >
> > > > Run the *old* maven, not the new one from the top of geronimo as you
> > > > normally did...and it will build fine.
> > > >
> > > > Jeff
> > > >
> > > > Aaron Mulder wrote:
> > > > > OK, so here's the flux for me:
> > > > >
> > > > > 1) I did an m:rebuild-all (probably the first mistake)
> > > > > 2) I can't build Geronimo offline because the specs are missing
> > > > > 3) I can't build Geronimo online because
> > > > > geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
> > > > > repos
> > > > > 4) I can't build the specs at all (when I run Maven 2 I get the big
> > > > > stack traces)
> > > > >
> > > > > I'll keep checking every now and then. In the mean time, if someone
> > > > > with a working specs module could sync it to the repo so at least
> > > > > there are binaries of all the specs online, that would get me going
> > > > > again.
> > > > >
> > > > > Thanks,
> > > > > Aaron
> > > > >
> > > > > On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > > > >> It must then be in a state of flux...this worked for me at 9AM (on my
> > > > >> new powerbook - yay) this morning...so I suspect they are working on it.
> > > > >>
> > > > >> Jeff
> > > > >>
> > > > >> Aaron Mulder wrote:
> > > > >>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > > > >>>> Aaron,
> > > > >>>>
> > > > >>>> I had the same issue...
> > > > >>>>
> > > > >>>> As a work around...go into your geronimo directory and issue this (all
> > > > >>>> on one line):
> > > > >>>>
> > > > >>>> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
> > > > >>>>
> > > > >>>> Then you should be able to build it all.
> > > > >>> Well, I did that, and when I tried to build that specs tree with Maven
> > > > >>> 2 I got the big Maven stack trace above. But I'll check it on IRC
> > > > >>> and/or later. Bad timing on my part, I guess. :)
> > > > >>>
> > > > >>> Aaron
> > > > >>>
> > > > >>>> Aaron Mulder wrote:
> > > > >>>>> So I tried a rebuild-all.
> > > > >>>>>
> > > > >>>>> Geronimo won't build because the specs aren't there.
> > > > >>>>>
> > > > >>>>> The specs won't build because of the error below (is that saying
> > > > >>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
> > > > >>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
> > > > >>>>> :)
> > > > >>>>>
> > > > >>>>> Thanks,
> > > > >>>>> Aaron
> > > > >>>>>
> > > > >>>>> [INFO] Scanning for projects...
> > > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > > >>>>> [ERROR] FATAL ERROR
> > > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > > >>>>> [INFO] Failed to resolve artifact.
> > > > >>>>>
> > > > >>>>> GroupId: org.apache.geronimo
> > > > >>>>> ArtifactId: geronimo
> > > > >>>>> Version: 1.0-SNAPSHOT
> > > > >>>>>
> > > > >>>>> Reason: Unable to download the artifact from any repository
> > > > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > > > >>>>>
> > > > >>>>> from the specified remote repositories:
> > > > >>>>> central (http://repo1.maven.org/maven2)
> > > > >>>>>
> > > > >>>>>
> > > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > > >>>>> [INFO] Trace
> > > > >>>>> org.apache.maven.reactor.MavenExecutionException: POM
> > > > >>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> > > > >>>>> download the artifact from any repository
> > > > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > > > >>>>>
> > > > >>>>> from the specified remote repositories:
> > > > >>>>> central (http://repo1.maven.org/maven2)
> > > > >>>>>
> > > > >>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
> > > > >>>>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
> > > > >>>>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
> > > > >>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> > > > >>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> > > > >>>>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> > > > >>>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> > > > >>>>> at java.lang.reflect.Method.invoke(Method.java:324)
> > > > >>>>> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
> > > > >>>>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> > > > >>>>> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
> > > > >>>>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> > > > >>>>> Caused by: org.apache.maven.project.ProjectBuildingException: POM
> > > > >>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> > > > >>>>> download the artifact from any repository
> > > > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > > > >>>>>
> > > > >>>>> from the specified remote repositories:
> > > > >>>>> central (http://repo1.maven.org/maven2)
> > > > >>>>>
> > > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
> > > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
> > > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
> > > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
> > > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
> > > > >>>>> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
> > > > >>>>> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
> > > > >>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
> > > > >>>>> ... 11 more
> > > > >>>>> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
> > > > >>>>> Unable to download the artifact from any repository
> > > > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > > > >>>>>
> > > > >>>>> from the specified remote repositories:
> > > > >>>>> central (http://repo1.maven.org/maven2)
> > > > >>>>>
> > > > >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
> > > > >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
> > > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
> > > > >>>>> ... 18 more
> > > > >>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
> > > > >>>>> Unable to download the artifact from any repository
> > > > >>>>> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
> > > > >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
> > > > >>>>> ... 20 more
> > > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > > >>>>> [INFO] Total time: < 1 second
> > > > >>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
> > > > >>>>> [INFO] Final Memory: 1M/2M
> > > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > > >>>>>
> > > > >>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > > > >>>>>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
> > > > >>>>>> in the <build> section of the pom, so we do not need to move anything in
> > > > >>>>>> the interim, just add those declarations to point at our locations.
> > > > >>>>>>
> > > > >>>>>> Jeff
> > > > >>>>>>
> > > > >>>>>> Aaron Mulder wrote:
> > > > >>>>>>> Jason,
> > > > >>>>>>>
> > > > >>>>>>> I guess this is really a Maven question, but... If I read that page
> > > > >>>>>>> right it says that what's now
> > > > >>>>>>>
> > > > >>>>>>> geronimo/module-name/src/java
> > > > >>>>>>> geronimo/module-name/src/test
> > > > >>>>>>>
> > > > >>>>>>> Would need to change (for Maven 2) to
> > > > >>>>>>>
> > > > >>>>>>> geronimo/module-name/src/main/java
> > > > >>>>>>> geronimo/module-name/src/test/java
> > > > >>>>>>>
> > > > >>>>>>> Is that correct? Is that easy to override so the former layout works
> > > > >>>>>>> for all the modules in one shot?
> > > > >>>>>>>
> > > > >>>>>>> Thanks,
> > > > >>>>>>> Aaron
> > > > >>>>>>>
> > > > >>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
> > > > >>>>>>>> Hi,
> > > > >>>>>>>>
> > > > >>>>>>>> I've got all the specs builds working with Maven 2.x except for the
> > > > >>>>>>>> corba module for which I need to whip up a quick plug-in to deal with
> > > > >>>>>>>> IDL.
> > > > >>>>>>>>
> > > > >>>>>>>> Are the specs built frequently because I see that you've changed the
> > > > >>>>>>>> directory structure of the SVN repository and so many of your references
> > > > >>>>>>>> like:
> > > > >>>>>>>>
> > > > >>>>>>>> ../../etc/project.xml
> > > > >>>>>>>>
> > > > >>>>>>>> Won't work anymore unless I'm not seeing something.
> > > > >>>>>>>>
> > > > >>>>>>>> If I can get the specs building with Maven 2.x and get the artifacts
> > > > >>>>>>>> produced into the m1 repository, and get the spec builds running under
> > > > >>>>>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
> > > > >>>>>>>> it as the default build? I figure that the specs don't change that often
> > > > >>>>>>>> and is a good place to start if folks are interesting in converting the
> > > > >>>>>>>> build over to Maven 2.x.
> > > > >>>>>>>>
> > > > >>>>>>>> This basically boils down to adhering to this:
> > > > >>>>>>>>
> > > > >>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
> > > > >>>>>>>>
> > > > >>>>>>>> And getting a few tips about the corba module (Alan :-)). Everything
> > > > >>>>>>>> else appears to be working.
> > > > >>>>>>>>
> > > > >>>>>>>> --
> > > > >>>>>>>> jvz.
> > > > >>>>>>>>
> > > > >>>>>>>> Jason van Zyl
> > > > >>>>>>>> jason at maven.org
> > > > >>>>>>>> http://maven.apache.org
> > > > >>>>>>>>
> > > > >>>>>>>> you are never dedicated to something you have complete confidence in.
> > > > >>>>>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
> > > > >>>>>>>> They know it is going to rise tomorrow. When people are fanatically
> > > > >>>>>>>> dedicated to political or religious faiths or any other kind of
> > > > >>>>>>>> dogmas or goals, it's always because these dogmas or
> > > > >>>>>>>> goals are in doubt.
> > > > >>>>>>>>
> > > > >>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
> > > > >>>>>>>>
> > > > >>>>>>>>
> > > >
> > >
> >
>
Re: Building specs with Maven 2.x
Posted by Aaron Mulder <am...@alumni.princeton.edu>.
On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
> Hmm, after looking again, I notice that you're checkout out specs
> *into* your Geronimo directory -- I guess that's the difference.
>
> Aaron
>
> On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
> > On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > > I think the flux is that you didn't follow what I said ;-)
> >
> > The M2 stack dump was fixed by running the command in Jason's e-mail
> > from geronimo (not specs) trunk. I suspect you'd encounter it if you
> > whacked both .maven and .m2 repositories and tried to build without
> > running the M2 command from the geronimo (not specs) trunk.
> >
> > However, I'm still left with the problem that until Jason fixes the
> > specs build to write to the M1 repo instead of the M2 repo, I have to
> > manually copy over all the spec JARs from ~/.m2 to ~/.maven. I'm
> > confused as to how this could be working for you if your geronimo and
> > specs trunks are both up to date.
> >
> > But if you think I'm not following what you say, please try this:
> >
> > rm -rf ~/.maven
> > rm -rf ~/.m2
> > mkdir foo
> > cd foo
> > svn co https://svn.apache.org/repos/asf/geronimo/trunk geronimo
> > svn co https://svn.apache.org/repos/asf/geronimo/specs/trunk geronimo-specs
> > cd geronimo
> > maven m:co (works)
> > maven (fails)
> > cd ../geronimo-specs
> > mvn (fails)
> > cd ../geronimo
> > mvn -N install (works)
> > maven (fails)
> > cd ../geronimo-specs
> > mvn (works)
> > cd ../geronimo
> > maven (fails)
> >
> > In other words, I ultimately got the specs to build, but nothing makes
> > the Geronimo build work without manual artifact copying, as far as I
> > can tell. Do you get a different result?
> >
> > Thanks,
> > Aaron
> >
> > >
> > > I just did it again and it worked fine. I even wiped out my maven repo
> > > too to be sure.
> > >
> > > From what I can see...from your stack trace you ran M2. That was your
> > > problem. Just do a checkout of specs, as I explained below...in your
> > > geronimo directory.
> > >
> > > Run the *old* maven, not the new one from the top of geronimo as you
> > > normally did...and it will build fine.
> > >
> > > Jeff
> > >
> > > Aaron Mulder wrote:
> > > > OK, so here's the flux for me:
> > > >
> > > > 1) I did an m:rebuild-all (probably the first mistake)
> > > > 2) I can't build Geronimo offline because the specs are missing
> > > > 3) I can't build Geronimo online because
> > > > geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
> > > > repos
> > > > 4) I can't build the specs at all (when I run Maven 2 I get the big
> > > > stack traces)
> > > >
> > > > I'll keep checking every now and then. In the mean time, if someone
> > > > with a working specs module could sync it to the repo so at least
> > > > there are binaries of all the specs online, that would get me going
> > > > again.
> > > >
> > > > Thanks,
> > > > Aaron
> > > >
> > > > On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > > >> It must then be in a state of flux...this worked for me at 9AM (on my
> > > >> new powerbook - yay) this morning...so I suspect they are working on it.
> > > >>
> > > >> Jeff
> > > >>
> > > >> Aaron Mulder wrote:
> > > >>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > > >>>> Aaron,
> > > >>>>
> > > >>>> I had the same issue...
> > > >>>>
> > > >>>> As a work around...go into your geronimo directory and issue this (all
> > > >>>> on one line):
> > > >>>>
> > > >>>> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
> > > >>>>
> > > >>>> Then you should be able to build it all.
> > > >>> Well, I did that, and when I tried to build that specs tree with Maven
> > > >>> 2 I got the big Maven stack trace above. But I'll check it on IRC
> > > >>> and/or later. Bad timing on my part, I guess. :)
> > > >>>
> > > >>> Aaron
> > > >>>
> > > >>>> Aaron Mulder wrote:
> > > >>>>> So I tried a rebuild-all.
> > > >>>>>
> > > >>>>> Geronimo won't build because the specs aren't there.
> > > >>>>>
> > > >>>>> The specs won't build because of the error below (is that saying
> > > >>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
> > > >>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
> > > >>>>> :)
> > > >>>>>
> > > >>>>> Thanks,
> > > >>>>> Aaron
> > > >>>>>
> > > >>>>> [INFO] Scanning for projects...
> > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > >>>>> [ERROR] FATAL ERROR
> > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > >>>>> [INFO] Failed to resolve artifact.
> > > >>>>>
> > > >>>>> GroupId: org.apache.geronimo
> > > >>>>> ArtifactId: geronimo
> > > >>>>> Version: 1.0-SNAPSHOT
> > > >>>>>
> > > >>>>> Reason: Unable to download the artifact from any repository
> > > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > > >>>>>
> > > >>>>> from the specified remote repositories:
> > > >>>>> central (http://repo1.maven.org/maven2)
> > > >>>>>
> > > >>>>>
> > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > >>>>> [INFO] Trace
> > > >>>>> org.apache.maven.reactor.MavenExecutionException: POM
> > > >>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> > > >>>>> download the artifact from any repository
> > > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > > >>>>>
> > > >>>>> from the specified remote repositories:
> > > >>>>> central (http://repo1.maven.org/maven2)
> > > >>>>>
> > > >>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
> > > >>>>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
> > > >>>>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
> > > >>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> > > >>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> > > >>>>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> > > >>>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> > > >>>>> at java.lang.reflect.Method.invoke(Method.java:324)
> > > >>>>> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
> > > >>>>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> > > >>>>> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
> > > >>>>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> > > >>>>> Caused by: org.apache.maven.project.ProjectBuildingException: POM
> > > >>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> > > >>>>> download the artifact from any repository
> > > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > > >>>>>
> > > >>>>> from the specified remote repositories:
> > > >>>>> central (http://repo1.maven.org/maven2)
> > > >>>>>
> > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
> > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
> > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
> > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
> > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
> > > >>>>> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
> > > >>>>> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
> > > >>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
> > > >>>>> ... 11 more
> > > >>>>> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
> > > >>>>> Unable to download the artifact from any repository
> > > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > > >>>>>
> > > >>>>> from the specified remote repositories:
> > > >>>>> central (http://repo1.maven.org/maven2)
> > > >>>>>
> > > >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
> > > >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
> > > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
> > > >>>>> ... 18 more
> > > >>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
> > > >>>>> Unable to download the artifact from any repository
> > > >>>>> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
> > > >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
> > > >>>>> ... 20 more
> > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > >>>>> [INFO] Total time: < 1 second
> > > >>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
> > > >>>>> [INFO] Final Memory: 1M/2M
> > > >>>>> [INFO] ----------------------------------------------------------------------------
> > > >>>>>
> > > >>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > > >>>>>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
> > > >>>>>> in the <build> section of the pom, so we do not need to move anything in
> > > >>>>>> the interim, just add those declarations to point at our locations.
> > > >>>>>>
> > > >>>>>> Jeff
> > > >>>>>>
> > > >>>>>> Aaron Mulder wrote:
> > > >>>>>>> Jason,
> > > >>>>>>>
> > > >>>>>>> I guess this is really a Maven question, but... If I read that page
> > > >>>>>>> right it says that what's now
> > > >>>>>>>
> > > >>>>>>> geronimo/module-name/src/java
> > > >>>>>>> geronimo/module-name/src/test
> > > >>>>>>>
> > > >>>>>>> Would need to change (for Maven 2) to
> > > >>>>>>>
> > > >>>>>>> geronimo/module-name/src/main/java
> > > >>>>>>> geronimo/module-name/src/test/java
> > > >>>>>>>
> > > >>>>>>> Is that correct? Is that easy to override so the former layout works
> > > >>>>>>> for all the modules in one shot?
> > > >>>>>>>
> > > >>>>>>> Thanks,
> > > >>>>>>> Aaron
> > > >>>>>>>
> > > >>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
> > > >>>>>>>> Hi,
> > > >>>>>>>>
> > > >>>>>>>> I've got all the specs builds working with Maven 2.x except for the
> > > >>>>>>>> corba module for which I need to whip up a quick plug-in to deal with
> > > >>>>>>>> IDL.
> > > >>>>>>>>
> > > >>>>>>>> Are the specs built frequently because I see that you've changed the
> > > >>>>>>>> directory structure of the SVN repository and so many of your references
> > > >>>>>>>> like:
> > > >>>>>>>>
> > > >>>>>>>> ../../etc/project.xml
> > > >>>>>>>>
> > > >>>>>>>> Won't work anymore unless I'm not seeing something.
> > > >>>>>>>>
> > > >>>>>>>> If I can get the specs building with Maven 2.x and get the artifacts
> > > >>>>>>>> produced into the m1 repository, and get the spec builds running under
> > > >>>>>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
> > > >>>>>>>> it as the default build? I figure that the specs don't change that often
> > > >>>>>>>> and is a good place to start if folks are interesting in converting the
> > > >>>>>>>> build over to Maven 2.x.
> > > >>>>>>>>
> > > >>>>>>>> This basically boils down to adhering to this:
> > > >>>>>>>>
> > > >>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
> > > >>>>>>>>
> > > >>>>>>>> And getting a few tips about the corba module (Alan :-)). Everything
> > > >>>>>>>> else appears to be working.
> > > >>>>>>>>
> > > >>>>>>>> --
> > > >>>>>>>> jvz.
> > > >>>>>>>>
> > > >>>>>>>> Jason van Zyl
> > > >>>>>>>> jason at maven.org
> > > >>>>>>>> http://maven.apache.org
> > > >>>>>>>>
> > > >>>>>>>> you are never dedicated to something you have complete confidence in.
> > > >>>>>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
> > > >>>>>>>> They know it is going to rise tomorrow. When people are fanatically
> > > >>>>>>>> dedicated to political or religious faiths or any other kind of
> > > >>>>>>>> dogmas or goals, it's always because these dogmas or
> > > >>>>>>>> goals are in doubt.
> > > >>>>>>>>
> > > >>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
> > > >>>>>>>>
> > > >>>>>>>>
> > >
> >
>
Re: Building specs with Maven 2.x
Posted by Aaron Mulder <am...@alumni.princeton.edu>.
Hmm, after looking again, I notice that you're checkout out specs
*into* your Geronimo directory -- I guess that's the difference.
Aaron
On 10/29/05, Aaron Mulder <am...@alumni.princeton.edu> wrote:
> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > I think the flux is that you didn't follow what I said ;-)
>
> The M2 stack dump was fixed by running the command in Jason's e-mail
> from geronimo (not specs) trunk. I suspect you'd encounter it if you
> whacked both .maven and .m2 repositories and tried to build without
> running the M2 command from the geronimo (not specs) trunk.
>
> However, I'm still left with the problem that until Jason fixes the
> specs build to write to the M1 repo instead of the M2 repo, I have to
> manually copy over all the spec JARs from ~/.m2 to ~/.maven. I'm
> confused as to how this could be working for you if your geronimo and
> specs trunks are both up to date.
>
> But if you think I'm not following what you say, please try this:
>
> rm -rf ~/.maven
> rm -rf ~/.m2
> mkdir foo
> cd foo
> svn co https://svn.apache.org/repos/asf/geronimo/trunk geronimo
> svn co https://svn.apache.org/repos/asf/geronimo/specs/trunk geronimo-specs
> cd geronimo
> maven m:co (works)
> maven (fails)
> cd ../geronimo-specs
> mvn (fails)
> cd ../geronimo
> mvn -N install (works)
> maven (fails)
> cd ../geronimo-specs
> mvn (works)
> cd ../geronimo
> maven (fails)
>
> In other words, I ultimately got the specs to build, but nothing makes
> the Geronimo build work without manual artifact copying, as far as I
> can tell. Do you get a different result?
>
> Thanks,
> Aaron
>
> >
> > I just did it again and it worked fine. I even wiped out my maven repo
> > too to be sure.
> >
> > From what I can see...from your stack trace you ran M2. That was your
> > problem. Just do a checkout of specs, as I explained below...in your
> > geronimo directory.
> >
> > Run the *old* maven, not the new one from the top of geronimo as you
> > normally did...and it will build fine.
> >
> > Jeff
> >
> > Aaron Mulder wrote:
> > > OK, so here's the flux for me:
> > >
> > > 1) I did an m:rebuild-all (probably the first mistake)
> > > 2) I can't build Geronimo offline because the specs are missing
> > > 3) I can't build Geronimo online because
> > > geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
> > > repos
> > > 4) I can't build the specs at all (when I run Maven 2 I get the big
> > > stack traces)
> > >
> > > I'll keep checking every now and then. In the mean time, if someone
> > > with a working specs module could sync it to the repo so at least
> > > there are binaries of all the specs online, that would get me going
> > > again.
> > >
> > > Thanks,
> > > Aaron
> > >
> > > On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > >> It must then be in a state of flux...this worked for me at 9AM (on my
> > >> new powerbook - yay) this morning...so I suspect they are working on it.
> > >>
> > >> Jeff
> > >>
> > >> Aaron Mulder wrote:
> > >>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > >>>> Aaron,
> > >>>>
> > >>>> I had the same issue...
> > >>>>
> > >>>> As a work around...go into your geronimo directory and issue this (all
> > >>>> on one line):
> > >>>>
> > >>>> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
> > >>>>
> > >>>> Then you should be able to build it all.
> > >>> Well, I did that, and when I tried to build that specs tree with Maven
> > >>> 2 I got the big Maven stack trace above. But I'll check it on IRC
> > >>> and/or later. Bad timing on my part, I guess. :)
> > >>>
> > >>> Aaron
> > >>>
> > >>>> Aaron Mulder wrote:
> > >>>>> So I tried a rebuild-all.
> > >>>>>
> > >>>>> Geronimo won't build because the specs aren't there.
> > >>>>>
> > >>>>> The specs won't build because of the error below (is that saying
> > >>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
> > >>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
> > >>>>> :)
> > >>>>>
> > >>>>> Thanks,
> > >>>>> Aaron
> > >>>>>
> > >>>>> [INFO] Scanning for projects...
> > >>>>> [INFO] ----------------------------------------------------------------------------
> > >>>>> [ERROR] FATAL ERROR
> > >>>>> [INFO] ----------------------------------------------------------------------------
> > >>>>> [INFO] Failed to resolve artifact.
> > >>>>>
> > >>>>> GroupId: org.apache.geronimo
> > >>>>> ArtifactId: geronimo
> > >>>>> Version: 1.0-SNAPSHOT
> > >>>>>
> > >>>>> Reason: Unable to download the artifact from any repository
> > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > >>>>>
> > >>>>> from the specified remote repositories:
> > >>>>> central (http://repo1.maven.org/maven2)
> > >>>>>
> > >>>>>
> > >>>>> [INFO] ----------------------------------------------------------------------------
> > >>>>> [INFO] Trace
> > >>>>> org.apache.maven.reactor.MavenExecutionException: POM
> > >>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> > >>>>> download the artifact from any repository
> > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > >>>>>
> > >>>>> from the specified remote repositories:
> > >>>>> central (http://repo1.maven.org/maven2)
> > >>>>>
> > >>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
> > >>>>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
> > >>>>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
> > >>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> > >>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> > >>>>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> > >>>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> > >>>>> at java.lang.reflect.Method.invoke(Method.java:324)
> > >>>>> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
> > >>>>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> > >>>>> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
> > >>>>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> > >>>>> Caused by: org.apache.maven.project.ProjectBuildingException: POM
> > >>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> > >>>>> download the artifact from any repository
> > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > >>>>>
> > >>>>> from the specified remote repositories:
> > >>>>> central (http://repo1.maven.org/maven2)
> > >>>>>
> > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
> > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
> > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
> > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
> > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
> > >>>>> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
> > >>>>> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
> > >>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
> > >>>>> ... 11 more
> > >>>>> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
> > >>>>> Unable to download the artifact from any repository
> > >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> > >>>>>
> > >>>>> from the specified remote repositories:
> > >>>>> central (http://repo1.maven.org/maven2)
> > >>>>>
> > >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
> > >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
> > >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
> > >>>>> ... 18 more
> > >>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
> > >>>>> Unable to download the artifact from any repository
> > >>>>> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
> > >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
> > >>>>> ... 20 more
> > >>>>> [INFO] ----------------------------------------------------------------------------
> > >>>>> [INFO] Total time: < 1 second
> > >>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
> > >>>>> [INFO] Final Memory: 1M/2M
> > >>>>> [INFO] ----------------------------------------------------------------------------
> > >>>>>
> > >>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> > >>>>>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
> > >>>>>> in the <build> section of the pom, so we do not need to move anything in
> > >>>>>> the interim, just add those declarations to point at our locations.
> > >>>>>>
> > >>>>>> Jeff
> > >>>>>>
> > >>>>>> Aaron Mulder wrote:
> > >>>>>>> Jason,
> > >>>>>>>
> > >>>>>>> I guess this is really a Maven question, but... If I read that page
> > >>>>>>> right it says that what's now
> > >>>>>>>
> > >>>>>>> geronimo/module-name/src/java
> > >>>>>>> geronimo/module-name/src/test
> > >>>>>>>
> > >>>>>>> Would need to change (for Maven 2) to
> > >>>>>>>
> > >>>>>>> geronimo/module-name/src/main/java
> > >>>>>>> geronimo/module-name/src/test/java
> > >>>>>>>
> > >>>>>>> Is that correct? Is that easy to override so the former layout works
> > >>>>>>> for all the modules in one shot?
> > >>>>>>>
> > >>>>>>> Thanks,
> > >>>>>>> Aaron
> > >>>>>>>
> > >>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
> > >>>>>>>> Hi,
> > >>>>>>>>
> > >>>>>>>> I've got all the specs builds working with Maven 2.x except for the
> > >>>>>>>> corba module for which I need to whip up a quick plug-in to deal with
> > >>>>>>>> IDL.
> > >>>>>>>>
> > >>>>>>>> Are the specs built frequently because I see that you've changed the
> > >>>>>>>> directory structure of the SVN repository and so many of your references
> > >>>>>>>> like:
> > >>>>>>>>
> > >>>>>>>> ../../etc/project.xml
> > >>>>>>>>
> > >>>>>>>> Won't work anymore unless I'm not seeing something.
> > >>>>>>>>
> > >>>>>>>> If I can get the specs building with Maven 2.x and get the artifacts
> > >>>>>>>> produced into the m1 repository, and get the spec builds running under
> > >>>>>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
> > >>>>>>>> it as the default build? I figure that the specs don't change that often
> > >>>>>>>> and is a good place to start if folks are interesting in converting the
> > >>>>>>>> build over to Maven 2.x.
> > >>>>>>>>
> > >>>>>>>> This basically boils down to adhering to this:
> > >>>>>>>>
> > >>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
> > >>>>>>>>
> > >>>>>>>> And getting a few tips about the corba module (Alan :-)). Everything
> > >>>>>>>> else appears to be working.
> > >>>>>>>>
> > >>>>>>>> --
> > >>>>>>>> jvz.
> > >>>>>>>>
> > >>>>>>>> Jason van Zyl
> > >>>>>>>> jason at maven.org
> > >>>>>>>> http://maven.apache.org
> > >>>>>>>>
> > >>>>>>>> you are never dedicated to something you have complete confidence in.
> > >>>>>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
> > >>>>>>>> They know it is going to rise tomorrow. When people are fanatically
> > >>>>>>>> dedicated to political or religious faiths or any other kind of
> > >>>>>>>> dogmas or goals, it's always because these dogmas or
> > >>>>>>>> goals are in doubt.
> > >>>>>>>>
> > >>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
> > >>>>>>>>
> > >>>>>>>>
> >
>
Re: Building specs with Maven 2.x
Posted by Jeff Genender <jg...@savoirtech.com>.
Aaron Mulder wrote:
> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>> I think the flux is that you didn't follow what I said ;-)
>
> The M2 stack dump was fixed by running the command in Jason's e-mail
> from geronimo (not specs) trunk. I suspect you'd encounter it if you
> whacked both .maven and .m2 repositories and tried to build without
> running the M2 command from the geronimo (not specs) trunk.
>
> However, I'm still left with the problem that until Jason fixes the
> specs build to write to the M1 repo instead of the M2 repo, I have to
> manually copy over all the spec JARs from ~/.m2 to ~/.maven. I'm
> confused as to how this could be working for you if your geronimo and
> specs trunks are both up to date.
>
> But if you think I'm not following what you say, please try this:
You didn't follow...thats the problem...see below..
>
> rm -rf ~/.maven
> rm -rf ~/.m2
> mkdir foo
> cd foo
> svn co https://svn.apache.org/repos/asf/geronimo/trunk geronimo
> svn co https://svn.apache.org/repos/asf/geronimo/specs/trunk geronimo-specs
Problem HERE ^^^^
Please do a cd geronimo... THEN to the svn co of geronimo-specs *in* the
geronimo dircetory. All of the old project.xmla,d maven.xml files are
still intact. They work fine (luckily).
> cd geronimo
> maven m:co (works)
> maven (fails)
> cd ../geronimo-specs
> mvn (fails)
> cd ../geronimo
> mvn -N install (works)
> maven (fails)
> cd ../geronimo-specs
> mvn (works)
> cd ../geronimo
> maven (fails)
>
> In other words, I ultimately got the specs to build, but nothing makes
> the Geronimo build work without manual artifact copying, as far as I
> can tell. Do you get a different result?
>
> Thanks,
> Aaron
>
>> I just did it again and it worked fine. I even wiped out my maven repo
>> too to be sure.
>>
>> From what I can see...from your stack trace you ran M2. That was your
>> problem. Just do a checkout of specs, as I explained below...in your
>> geronimo directory.
>>
>> Run the *old* maven, not the new one from the top of geronimo as you
>> normally did...and it will build fine.
>>
>> Jeff
>>
>> Aaron Mulder wrote:
>>> OK, so here's the flux for me:
>>>
>>> 1) I did an m:rebuild-all (probably the first mistake)
>>> 2) I can't build Geronimo offline because the specs are missing
>>> 3) I can't build Geronimo online because
>>> geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
>>> repos
>>> 4) I can't build the specs at all (when I run Maven 2 I get the big
>>> stack traces)
>>>
>>> I'll keep checking every now and then. In the mean time, if someone
>>> with a working specs module could sync it to the repo so at least
>>> there are binaries of all the specs online, that would get me going
>>> again.
>>>
>>> Thanks,
>>> Aaron
>>>
>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>> It must then be in a state of flux...this worked for me at 9AM (on my
>>>> new powerbook - yay) this morning...so I suspect they are working on it.
>>>>
>>>> Jeff
>>>>
>>>> Aaron Mulder wrote:
>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>> Aaron,
>>>>>>
>>>>>> I had the same issue...
>>>>>>
>>>>>> As a work around...go into your geronimo directory and issue this (all
>>>>>> on one line):
>>>>>>
>>>>>> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
>>>>>>
>>>>>> Then you should be able to build it all.
>>>>> Well, I did that, and when I tried to build that specs tree with Maven
>>>>> 2 I got the big Maven stack trace above. But I'll check it on IRC
>>>>> and/or later. Bad timing on my part, I guess. :)
>>>>>
>>>>> Aaron
>>>>>
>>>>>> Aaron Mulder wrote:
>>>>>>> So I tried a rebuild-all.
>>>>>>>
>>>>>>> Geronimo won't build because the specs aren't there.
>>>>>>>
>>>>>>> The specs won't build because of the error below (is that saying
>>>>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
>>>>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
>>>>>>> :)
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Aaron
>>>>>>>
>>>>>>> [INFO] Scanning for projects...
>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>> [ERROR] FATAL ERROR
>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>> [INFO] Failed to resolve artifact.
>>>>>>>
>>>>>>> GroupId: org.apache.geronimo
>>>>>>> ArtifactId: geronimo
>>>>>>> Version: 1.0-SNAPSHOT
>>>>>>>
>>>>>>> Reason: Unable to download the artifact from any repository
>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>
>>>>>>> from the specified remote repositories:
>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>
>>>>>>>
>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>> [INFO] Trace
>>>>>>> org.apache.maven.reactor.MavenExecutionException: POM
>>>>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
>>>>>>> download the artifact from any repository
>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>
>>>>>>> from the specified remote repositories:
>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>
>>>>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
>>>>>>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
>>>>>>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
>>>>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
>>>>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>>>>>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>>>>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>>>>>> at java.lang.reflect.Method.invoke(Method.java:324)
>>>>>>> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
>>>>>>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
>>>>>>> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
>>>>>>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
>>>>>>> Caused by: org.apache.maven.project.ProjectBuildingException: POM
>>>>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
>>>>>>> download the artifact from any repository
>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>
>>>>>>> from the specified remote repositories:
>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>
>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
>>>>>>> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
>>>>>>> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
>>>>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
>>>>>>> ... 11 more
>>>>>>> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
>>>>>>> Unable to download the artifact from any repository
>>>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>>>
>>>>>>> from the specified remote repositories:
>>>>>>> central (http://repo1.maven.org/maven2)
>>>>>>>
>>>>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
>>>>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
>>>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
>>>>>>> ... 18 more
>>>>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
>>>>>>> Unable to download the artifact from any repository
>>>>>>> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
>>>>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
>>>>>>> ... 20 more
>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>> [INFO] Total time: < 1 second
>>>>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
>>>>>>> [INFO] Final Memory: 1M/2M
>>>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>>>
>>>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>>>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
>>>>>>>> in the <build> section of the pom, so we do not need to move anything in
>>>>>>>> the interim, just add those declarations to point at our locations.
>>>>>>>>
>>>>>>>> Jeff
>>>>>>>>
>>>>>>>> Aaron Mulder wrote:
>>>>>>>>> Jason,
>>>>>>>>>
>>>>>>>>> I guess this is really a Maven question, but... If I read that page
>>>>>>>>> right it says that what's now
>>>>>>>>>
>>>>>>>>> geronimo/module-name/src/java
>>>>>>>>> geronimo/module-name/src/test
>>>>>>>>>
>>>>>>>>> Would need to change (for Maven 2) to
>>>>>>>>>
>>>>>>>>> geronimo/module-name/src/main/java
>>>>>>>>> geronimo/module-name/src/test/java
>>>>>>>>>
>>>>>>>>> Is that correct? Is that easy to override so the former layout works
>>>>>>>>> for all the modules in one shot?
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> Aaron
>>>>>>>>>
>>>>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> I've got all the specs builds working with Maven 2.x except for the
>>>>>>>>>> corba module for which I need to whip up a quick plug-in to deal with
>>>>>>>>>> IDL.
>>>>>>>>>>
>>>>>>>>>> Are the specs built frequently because I see that you've changed the
>>>>>>>>>> directory structure of the SVN repository and so many of your references
>>>>>>>>>> like:
>>>>>>>>>>
>>>>>>>>>> ../../etc/project.xml
>>>>>>>>>>
>>>>>>>>>> Won't work anymore unless I'm not seeing something.
>>>>>>>>>>
>>>>>>>>>> If I can get the specs building with Maven 2.x and get the artifacts
>>>>>>>>>> produced into the m1 repository, and get the spec builds running under
>>>>>>>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
>>>>>>>>>> it as the default build? I figure that the specs don't change that often
>>>>>>>>>> and is a good place to start if folks are interesting in converting the
>>>>>>>>>> build over to Maven 2.x.
>>>>>>>>>>
>>>>>>>>>> This basically boils down to adhering to this:
>>>>>>>>>>
>>>>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
>>>>>>>>>>
>>>>>>>>>> And getting a few tips about the corba module (Alan :-)). Everything
>>>>>>>>>> else appears to be working.
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> jvz.
>>>>>>>>>>
>>>>>>>>>> Jason van Zyl
>>>>>>>>>> jason at maven.org
>>>>>>>>>> http://maven.apache.org
>>>>>>>>>>
>>>>>>>>>> you are never dedicated to something you have complete confidence in.
>>>>>>>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
>>>>>>>>>> They know it is going to rise tomorrow. When people are fanatically
>>>>>>>>>> dedicated to political or religious faiths or any other kind of
>>>>>>>>>> dogmas or goals, it's always because these dogmas or
>>>>>>>>>> goals are in doubt.
>>>>>>>>>>
>>>>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>>>>>>>>>>
>>>>>>>>>>
Re: Building specs with Maven 2.x
Posted by Aaron Mulder <am...@alumni.princeton.edu>.
On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> I think the flux is that you didn't follow what I said ;-)
The M2 stack dump was fixed by running the command in Jason's e-mail
from geronimo (not specs) trunk. I suspect you'd encounter it if you
whacked both .maven and .m2 repositories and tried to build without
running the M2 command from the geronimo (not specs) trunk.
However, I'm still left with the problem that until Jason fixes the
specs build to write to the M1 repo instead of the M2 repo, I have to
manually copy over all the spec JARs from ~/.m2 to ~/.maven. I'm
confused as to how this could be working for you if your geronimo and
specs trunks are both up to date.
But if you think I'm not following what you say, please try this:
rm -rf ~/.maven
rm -rf ~/.m2
mkdir foo
cd foo
svn co https://svn.apache.org/repos/asf/geronimo/trunk geronimo
svn co https://svn.apache.org/repos/asf/geronimo/specs/trunk geronimo-specs
cd geronimo
maven m:co (works)
maven (fails)
cd ../geronimo-specs
mvn (fails)
cd ../geronimo
mvn -N install (works)
maven (fails)
cd ../geronimo-specs
mvn (works)
cd ../geronimo
maven (fails)
In other words, I ultimately got the specs to build, but nothing makes
the Geronimo build work without manual artifact copying, as far as I
can tell. Do you get a different result?
Thanks,
Aaron
>
> I just did it again and it worked fine. I even wiped out my maven repo
> too to be sure.
>
> From what I can see...from your stack trace you ran M2. That was your
> problem. Just do a checkout of specs, as I explained below...in your
> geronimo directory.
>
> Run the *old* maven, not the new one from the top of geronimo as you
> normally did...and it will build fine.
>
> Jeff
>
> Aaron Mulder wrote:
> > OK, so here's the flux for me:
> >
> > 1) I did an m:rebuild-all (probably the first mistake)
> > 2) I can't build Geronimo offline because the specs are missing
> > 3) I can't build Geronimo online because
> > geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
> > repos
> > 4) I can't build the specs at all (when I run Maven 2 I get the big
> > stack traces)
> >
> > I'll keep checking every now and then. In the mean time, if someone
> > with a working specs module could sync it to the repo so at least
> > there are binaries of all the specs online, that would get me going
> > again.
> >
> > Thanks,
> > Aaron
> >
> > On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >> It must then be in a state of flux...this worked for me at 9AM (on my
> >> new powerbook - yay) this morning...so I suspect they are working on it.
> >>
> >> Jeff
> >>
> >> Aaron Mulder wrote:
> >>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >>>> Aaron,
> >>>>
> >>>> I had the same issue...
> >>>>
> >>>> As a work around...go into your geronimo directory and issue this (all
> >>>> on one line):
> >>>>
> >>>> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
> >>>>
> >>>> Then you should be able to build it all.
> >>> Well, I did that, and when I tried to build that specs tree with Maven
> >>> 2 I got the big Maven stack trace above. But I'll check it on IRC
> >>> and/or later. Bad timing on my part, I guess. :)
> >>>
> >>> Aaron
> >>>
> >>>> Aaron Mulder wrote:
> >>>>> So I tried a rebuild-all.
> >>>>>
> >>>>> Geronimo won't build because the specs aren't there.
> >>>>>
> >>>>> The specs won't build because of the error below (is that saying
> >>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
> >>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
> >>>>> :)
> >>>>>
> >>>>> Thanks,
> >>>>> Aaron
> >>>>>
> >>>>> [INFO] Scanning for projects...
> >>>>> [INFO] ----------------------------------------------------------------------------
> >>>>> [ERROR] FATAL ERROR
> >>>>> [INFO] ----------------------------------------------------------------------------
> >>>>> [INFO] Failed to resolve artifact.
> >>>>>
> >>>>> GroupId: org.apache.geronimo
> >>>>> ArtifactId: geronimo
> >>>>> Version: 1.0-SNAPSHOT
> >>>>>
> >>>>> Reason: Unable to download the artifact from any repository
> >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>>>
> >>>>> from the specified remote repositories:
> >>>>> central (http://repo1.maven.org/maven2)
> >>>>>
> >>>>>
> >>>>> [INFO] ----------------------------------------------------------------------------
> >>>>> [INFO] Trace
> >>>>> org.apache.maven.reactor.MavenExecutionException: POM
> >>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> >>>>> download the artifact from any repository
> >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>>>
> >>>>> from the specified remote repositories:
> >>>>> central (http://repo1.maven.org/maven2)
> >>>>>
> >>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
> >>>>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
> >>>>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
> >>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> >>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> >>>>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> >>>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> >>>>> at java.lang.reflect.Method.invoke(Method.java:324)
> >>>>> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
> >>>>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> >>>>> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
> >>>>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> >>>>> Caused by: org.apache.maven.project.ProjectBuildingException: POM
> >>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> >>>>> download the artifact from any repository
> >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>>>
> >>>>> from the specified remote repositories:
> >>>>> central (http://repo1.maven.org/maven2)
> >>>>>
> >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
> >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
> >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
> >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
> >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
> >>>>> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
> >>>>> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
> >>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
> >>>>> ... 11 more
> >>>>> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
> >>>>> Unable to download the artifact from any repository
> >>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>>>
> >>>>> from the specified remote repositories:
> >>>>> central (http://repo1.maven.org/maven2)
> >>>>>
> >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
> >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
> >>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
> >>>>> ... 18 more
> >>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
> >>>>> Unable to download the artifact from any repository
> >>>>> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
> >>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
> >>>>> ... 20 more
> >>>>> [INFO] ----------------------------------------------------------------------------
> >>>>> [INFO] Total time: < 1 second
> >>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
> >>>>> [INFO] Final Memory: 1M/2M
> >>>>> [INFO] ----------------------------------------------------------------------------
> >>>>>
> >>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >>>>>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
> >>>>>> in the <build> section of the pom, so we do not need to move anything in
> >>>>>> the interim, just add those declarations to point at our locations.
> >>>>>>
> >>>>>> Jeff
> >>>>>>
> >>>>>> Aaron Mulder wrote:
> >>>>>>> Jason,
> >>>>>>>
> >>>>>>> I guess this is really a Maven question, but... If I read that page
> >>>>>>> right it says that what's now
> >>>>>>>
> >>>>>>> geronimo/module-name/src/java
> >>>>>>> geronimo/module-name/src/test
> >>>>>>>
> >>>>>>> Would need to change (for Maven 2) to
> >>>>>>>
> >>>>>>> geronimo/module-name/src/main/java
> >>>>>>> geronimo/module-name/src/test/java
> >>>>>>>
> >>>>>>> Is that correct? Is that easy to override so the former layout works
> >>>>>>> for all the modules in one shot?
> >>>>>>>
> >>>>>>> Thanks,
> >>>>>>> Aaron
> >>>>>>>
> >>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
> >>>>>>>> Hi,
> >>>>>>>>
> >>>>>>>> I've got all the specs builds working with Maven 2.x except for the
> >>>>>>>> corba module for which I need to whip up a quick plug-in to deal with
> >>>>>>>> IDL.
> >>>>>>>>
> >>>>>>>> Are the specs built frequently because I see that you've changed the
> >>>>>>>> directory structure of the SVN repository and so many of your references
> >>>>>>>> like:
> >>>>>>>>
> >>>>>>>> ../../etc/project.xml
> >>>>>>>>
> >>>>>>>> Won't work anymore unless I'm not seeing something.
> >>>>>>>>
> >>>>>>>> If I can get the specs building with Maven 2.x and get the artifacts
> >>>>>>>> produced into the m1 repository, and get the spec builds running under
> >>>>>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
> >>>>>>>> it as the default build? I figure that the specs don't change that often
> >>>>>>>> and is a good place to start if folks are interesting in converting the
> >>>>>>>> build over to Maven 2.x.
> >>>>>>>>
> >>>>>>>> This basically boils down to adhering to this:
> >>>>>>>>
> >>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
> >>>>>>>>
> >>>>>>>> And getting a few tips about the corba module (Alan :-)). Everything
> >>>>>>>> else appears to be working.
> >>>>>>>>
> >>>>>>>> --
> >>>>>>>> jvz.
> >>>>>>>>
> >>>>>>>> Jason van Zyl
> >>>>>>>> jason at maven.org
> >>>>>>>> http://maven.apache.org
> >>>>>>>>
> >>>>>>>> you are never dedicated to something you have complete confidence in.
> >>>>>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
> >>>>>>>> They know it is going to rise tomorrow. When people are fanatically
> >>>>>>>> dedicated to political or religious faiths or any other kind of
> >>>>>>>> dogmas or goals, it's always because these dogmas or
> >>>>>>>> goals are in doubt.
> >>>>>>>>
> >>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
> >>>>>>>>
> >>>>>>>>
>
Re: Building specs with Maven 2.x
Posted by Jeff Genender <jg...@savoirtech.com>.
I think the flux is that you didn't follow what I said ;-)
I just did it again and it worked fine. I even wiped out my maven repo
too to be sure.
From what I can see...from your stack trace you ran M2. That was your
problem. Just do a checkout of specs, as I explained below...in your
geronimo directory.
Run the *old* maven, not the new one from the top of geronimo as you
normally did...and it will build fine.
Jeff
Aaron Mulder wrote:
> OK, so here's the flux for me:
>
> 1) I did an m:rebuild-all (probably the first mistake)
> 2) I can't build Geronimo offline because the specs are missing
> 3) I can't build Geronimo online because
> geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
> repos
> 4) I can't build the specs at all (when I run Maven 2 I get the big
> stack traces)
>
> I'll keep checking every now and then. In the mean time, if someone
> with a working specs module could sync it to the repo so at least
> there are binaries of all the specs online, that would get me going
> again.
>
> Thanks,
> Aaron
>
> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>> It must then be in a state of flux...this worked for me at 9AM (on my
>> new powerbook - yay) this morning...so I suspect they are working on it.
>>
>> Jeff
>>
>> Aaron Mulder wrote:
>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>> Aaron,
>>>>
>>>> I had the same issue...
>>>>
>>>> As a work around...go into your geronimo directory and issue this (all
>>>> on one line):
>>>>
>>>> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
>>>>
>>>> Then you should be able to build it all.
>>> Well, I did that, and when I tried to build that specs tree with Maven
>>> 2 I got the big Maven stack trace above. But I'll check it on IRC
>>> and/or later. Bad timing on my part, I guess. :)
>>>
>>> Aaron
>>>
>>>> Aaron Mulder wrote:
>>>>> So I tried a rebuild-all.
>>>>>
>>>>> Geronimo won't build because the specs aren't there.
>>>>>
>>>>> The specs won't build because of the error below (is that saying
>>>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
>>>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
>>>>> :)
>>>>>
>>>>> Thanks,
>>>>> Aaron
>>>>>
>>>>> [INFO] Scanning for projects...
>>>>> [INFO] ----------------------------------------------------------------------------
>>>>> [ERROR] FATAL ERROR
>>>>> [INFO] ----------------------------------------------------------------------------
>>>>> [INFO] Failed to resolve artifact.
>>>>>
>>>>> GroupId: org.apache.geronimo
>>>>> ArtifactId: geronimo
>>>>> Version: 1.0-SNAPSHOT
>>>>>
>>>>> Reason: Unable to download the artifact from any repository
>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>
>>>>> from the specified remote repositories:
>>>>> central (http://repo1.maven.org/maven2)
>>>>>
>>>>>
>>>>> [INFO] ----------------------------------------------------------------------------
>>>>> [INFO] Trace
>>>>> org.apache.maven.reactor.MavenExecutionException: POM
>>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
>>>>> download the artifact from any repository
>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>
>>>>> from the specified remote repositories:
>>>>> central (http://repo1.maven.org/maven2)
>>>>>
>>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
>>>>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
>>>>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
>>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
>>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>>>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>>>> at java.lang.reflect.Method.invoke(Method.java:324)
>>>>> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
>>>>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
>>>>> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
>>>>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
>>>>> Caused by: org.apache.maven.project.ProjectBuildingException: POM
>>>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
>>>>> download the artifact from any repository
>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>
>>>>> from the specified remote repositories:
>>>>> central (http://repo1.maven.org/maven2)
>>>>>
>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
>>>>> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
>>>>> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
>>>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
>>>>> ... 11 more
>>>>> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
>>>>> Unable to download the artifact from any repository
>>>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>>>
>>>>> from the specified remote repositories:
>>>>> central (http://repo1.maven.org/maven2)
>>>>>
>>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
>>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
>>>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
>>>>> ... 18 more
>>>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
>>>>> Unable to download the artifact from any repository
>>>>> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
>>>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
>>>>> ... 20 more
>>>>> [INFO] ----------------------------------------------------------------------------
>>>>> [INFO] Total time: < 1 second
>>>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
>>>>> [INFO] Final Memory: 1M/2M
>>>>> [INFO] ----------------------------------------------------------------------------
>>>>>
>>>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>>>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
>>>>>> in the <build> section of the pom, so we do not need to move anything in
>>>>>> the interim, just add those declarations to point at our locations.
>>>>>>
>>>>>> Jeff
>>>>>>
>>>>>> Aaron Mulder wrote:
>>>>>>> Jason,
>>>>>>>
>>>>>>> I guess this is really a Maven question, but... If I read that page
>>>>>>> right it says that what's now
>>>>>>>
>>>>>>> geronimo/module-name/src/java
>>>>>>> geronimo/module-name/src/test
>>>>>>>
>>>>>>> Would need to change (for Maven 2) to
>>>>>>>
>>>>>>> geronimo/module-name/src/main/java
>>>>>>> geronimo/module-name/src/test/java
>>>>>>>
>>>>>>> Is that correct? Is that easy to override so the former layout works
>>>>>>> for all the modules in one shot?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Aaron
>>>>>>>
>>>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I've got all the specs builds working with Maven 2.x except for the
>>>>>>>> corba module for which I need to whip up a quick plug-in to deal with
>>>>>>>> IDL.
>>>>>>>>
>>>>>>>> Are the specs built frequently because I see that you've changed the
>>>>>>>> directory structure of the SVN repository and so many of your references
>>>>>>>> like:
>>>>>>>>
>>>>>>>> ../../etc/project.xml
>>>>>>>>
>>>>>>>> Won't work anymore unless I'm not seeing something.
>>>>>>>>
>>>>>>>> If I can get the specs building with Maven 2.x and get the artifacts
>>>>>>>> produced into the m1 repository, and get the spec builds running under
>>>>>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
>>>>>>>> it as the default build? I figure that the specs don't change that often
>>>>>>>> and is a good place to start if folks are interesting in converting the
>>>>>>>> build over to Maven 2.x.
>>>>>>>>
>>>>>>>> This basically boils down to adhering to this:
>>>>>>>>
>>>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
>>>>>>>>
>>>>>>>> And getting a few tips about the corba module (Alan :-)). Everything
>>>>>>>> else appears to be working.
>>>>>>>>
>>>>>>>> --
>>>>>>>> jvz.
>>>>>>>>
>>>>>>>> Jason van Zyl
>>>>>>>> jason at maven.org
>>>>>>>> http://maven.apache.org
>>>>>>>>
>>>>>>>> you are never dedicated to something you have complete confidence in.
>>>>>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
>>>>>>>> They know it is going to rise tomorrow. When people are fanatically
>>>>>>>> dedicated to political or religious faiths or any other kind of
>>>>>>>> dogmas or goals, it's always because these dogmas or
>>>>>>>> goals are in doubt.
>>>>>>>>
>>>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>>>>>>>>
>>>>>>>>
Re: Building specs with Maven 2.x
Posted by Aaron Mulder <am...@alumni.princeton.edu>.
OK, so here's the flux for me:
1) I did an m:rebuild-all (probably the first mistake)
2) I can't build Geronimo offline because the specs are missing
3) I can't build Geronimo online because
geronimo-spec-j2ee-jacc-1.0-rc5.jar is not in any of the the online
repos
4) I can't build the specs at all (when I run Maven 2 I get the big
stack traces)
I'll keep checking every now and then. In the mean time, if someone
with a working specs module could sync it to the repo so at least
there are binaries of all the specs online, that would get me going
again.
Thanks,
Aaron
On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> It must then be in a state of flux...this worked for me at 9AM (on my
> new powerbook - yay) this morning...so I suspect they are working on it.
>
> Jeff
>
> Aaron Mulder wrote:
> > On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >> Aaron,
> >>
> >> I had the same issue...
> >>
> >> As a work around...go into your geronimo directory and issue this (all
> >> on one line):
> >>
> >> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
> >>
> >> Then you should be able to build it all.
> >
> > Well, I did that, and when I tried to build that specs tree with Maven
> > 2 I got the big Maven stack trace above. But I'll check it on IRC
> > and/or later. Bad timing on my part, I guess. :)
> >
> > Aaron
> >
> >> Aaron Mulder wrote:
> >>> So I tried a rebuild-all.
> >>>
> >>> Geronimo won't build because the specs aren't there.
> >>>
> >>> The specs won't build because of the error below (is that saying
> >>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
> >>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
> >>> :)
> >>>
> >>> Thanks,
> >>> Aaron
> >>>
> >>> [INFO] Scanning for projects...
> >>> [INFO] ----------------------------------------------------------------------------
> >>> [ERROR] FATAL ERROR
> >>> [INFO] ----------------------------------------------------------------------------
> >>> [INFO] Failed to resolve artifact.
> >>>
> >>> GroupId: org.apache.geronimo
> >>> ArtifactId: geronimo
> >>> Version: 1.0-SNAPSHOT
> >>>
> >>> Reason: Unable to download the artifact from any repository
> >>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>
> >>> from the specified remote repositories:
> >>> central (http://repo1.maven.org/maven2)
> >>>
> >>>
> >>> [INFO] ----------------------------------------------------------------------------
> >>> [INFO] Trace
> >>> org.apache.maven.reactor.MavenExecutionException: POM
> >>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> >>> download the artifact from any repository
> >>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>
> >>> from the specified remote repositories:
> >>> central (http://repo1.maven.org/maven2)
> >>>
> >>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
> >>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
> >>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
> >>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> >>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> >>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> >>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> >>> at java.lang.reflect.Method.invoke(Method.java:324)
> >>> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
> >>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> >>> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
> >>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> >>> Caused by: org.apache.maven.project.ProjectBuildingException: POM
> >>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> >>> download the artifact from any repository
> >>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>
> >>> from the specified remote repositories:
> >>> central (http://repo1.maven.org/maven2)
> >>>
> >>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
> >>> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
> >>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
> >>> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
> >>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
> >>> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
> >>> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
> >>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
> >>> ... 11 more
> >>> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
> >>> Unable to download the artifact from any repository
> >>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >>>
> >>> from the specified remote repositories:
> >>> central (http://repo1.maven.org/maven2)
> >>>
> >>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
> >>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
> >>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
> >>> ... 18 more
> >>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
> >>> Unable to download the artifact from any repository
> >>> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
> >>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
> >>> ... 20 more
> >>> [INFO] ----------------------------------------------------------------------------
> >>> [INFO] Total time: < 1 second
> >>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
> >>> [INFO] Final Memory: 1M/2M
> >>> [INFO] ----------------------------------------------------------------------------
> >>>
> >>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >>>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
> >>>> in the <build> section of the pom, so we do not need to move anything in
> >>>> the interim, just add those declarations to point at our locations.
> >>>>
> >>>> Jeff
> >>>>
> >>>> Aaron Mulder wrote:
> >>>>> Jason,
> >>>>>
> >>>>> I guess this is really a Maven question, but... If I read that page
> >>>>> right it says that what's now
> >>>>>
> >>>>> geronimo/module-name/src/java
> >>>>> geronimo/module-name/src/test
> >>>>>
> >>>>> Would need to change (for Maven 2) to
> >>>>>
> >>>>> geronimo/module-name/src/main/java
> >>>>> geronimo/module-name/src/test/java
> >>>>>
> >>>>> Is that correct? Is that easy to override so the former layout works
> >>>>> for all the modules in one shot?
> >>>>>
> >>>>> Thanks,
> >>>>> Aaron
> >>>>>
> >>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
> >>>>>> Hi,
> >>>>>>
> >>>>>> I've got all the specs builds working with Maven 2.x except for the
> >>>>>> corba module for which I need to whip up a quick plug-in to deal with
> >>>>>> IDL.
> >>>>>>
> >>>>>> Are the specs built frequently because I see that you've changed the
> >>>>>> directory structure of the SVN repository and so many of your references
> >>>>>> like:
> >>>>>>
> >>>>>> ../../etc/project.xml
> >>>>>>
> >>>>>> Won't work anymore unless I'm not seeing something.
> >>>>>>
> >>>>>> If I can get the specs building with Maven 2.x and get the artifacts
> >>>>>> produced into the m1 repository, and get the spec builds running under
> >>>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
> >>>>>> it as the default build? I figure that the specs don't change that often
> >>>>>> and is a good place to start if folks are interesting in converting the
> >>>>>> build over to Maven 2.x.
> >>>>>>
> >>>>>> This basically boils down to adhering to this:
> >>>>>>
> >>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
> >>>>>>
> >>>>>> And getting a few tips about the corba module (Alan :-)). Everything
> >>>>>> else appears to be working.
> >>>>>>
> >>>>>> --
> >>>>>> jvz.
> >>>>>>
> >>>>>> Jason van Zyl
> >>>>>> jason at maven.org
> >>>>>> http://maven.apache.org
> >>>>>>
> >>>>>> you are never dedicated to something you have complete confidence in.
> >>>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
> >>>>>> They know it is going to rise tomorrow. When people are fanatically
> >>>>>> dedicated to political or religious faiths or any other kind of
> >>>>>> dogmas or goals, it's always because these dogmas or
> >>>>>> goals are in doubt.
> >>>>>>
> >>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
> >>>>>>
> >>>>>>
>
Re: Building specs with Maven 2.x
Posted by Jeff Genender <jg...@savoirtech.com>.
It must then be in a state of flux...this worked for me at 9AM (on my
new powerbook - yay) this morning...so I suspect they are working on it.
Jeff
Aaron Mulder wrote:
> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>> Aaron,
>>
>> I had the same issue...
>>
>> As a work around...go into your geronimo directory and issue this (all
>> on one line):
>>
>> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
>>
>> Then you should be able to build it all.
>
> Well, I did that, and when I tried to build that specs tree with Maven
> 2 I got the big Maven stack trace above. But I'll check it on IRC
> and/or later. Bad timing on my part, I guess. :)
>
> Aaron
>
>> Aaron Mulder wrote:
>>> So I tried a rebuild-all.
>>>
>>> Geronimo won't build because the specs aren't there.
>>>
>>> The specs won't build because of the error below (is that saying
>>> Geronimo isn't there?). I assume I'm supposed to use maven2 on
>>> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
>>> :)
>>>
>>> Thanks,
>>> Aaron
>>>
>>> [INFO] Scanning for projects...
>>> [INFO] ----------------------------------------------------------------------------
>>> [ERROR] FATAL ERROR
>>> [INFO] ----------------------------------------------------------------------------
>>> [INFO] Failed to resolve artifact.
>>>
>>> GroupId: org.apache.geronimo
>>> ArtifactId: geronimo
>>> Version: 1.0-SNAPSHOT
>>>
>>> Reason: Unable to download the artifact from any repository
>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>
>>> from the specified remote repositories:
>>> central (http://repo1.maven.org/maven2)
>>>
>>>
>>> [INFO] ----------------------------------------------------------------------------
>>> [INFO] Trace
>>> org.apache.maven.reactor.MavenExecutionException: POM
>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
>>> download the artifact from any repository
>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>
>>> from the specified remote repositories:
>>> central (http://repo1.maven.org/maven2)
>>>
>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
>>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
>>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>> at java.lang.reflect.Method.invoke(Method.java:324)
>>> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
>>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
>>> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
>>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
>>> Caused by: org.apache.maven.project.ProjectBuildingException: POM
>>> 'org.apache.geronimo:geronimo' not found in repository: Unable to
>>> download the artifact from any repository
>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>
>>> from the specified remote repositories:
>>> central (http://repo1.maven.org/maven2)
>>>
>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
>>> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
>>> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
>>> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
>>> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
>>> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
>>> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
>>> ... 11 more
>>> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
>>> Unable to download the artifact from any repository
>>> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>>>
>>> from the specified remote repositories:
>>> central (http://repo1.maven.org/maven2)
>>>
>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
>>> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
>>> ... 18 more
>>> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
>>> Unable to download the artifact from any repository
>>> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
>>> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
>>> ... 20 more
>>> [INFO] ----------------------------------------------------------------------------
>>> [INFO] Total time: < 1 second
>>> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
>>> [INFO] Final Memory: 1M/2M
>>> [INFO] ----------------------------------------------------------------------------
>>>
>>> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>>>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
>>>> in the <build> section of the pom, so we do not need to move anything in
>>>> the interim, just add those declarations to point at our locations.
>>>>
>>>> Jeff
>>>>
>>>> Aaron Mulder wrote:
>>>>> Jason,
>>>>>
>>>>> I guess this is really a Maven question, but... If I read that page
>>>>> right it says that what's now
>>>>>
>>>>> geronimo/module-name/src/java
>>>>> geronimo/module-name/src/test
>>>>>
>>>>> Would need to change (for Maven 2) to
>>>>>
>>>>> geronimo/module-name/src/main/java
>>>>> geronimo/module-name/src/test/java
>>>>>
>>>>> Is that correct? Is that easy to override so the former layout works
>>>>> for all the modules in one shot?
>>>>>
>>>>> Thanks,
>>>>> Aaron
>>>>>
>>>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
>>>>>> Hi,
>>>>>>
>>>>>> I've got all the specs builds working with Maven 2.x except for the
>>>>>> corba module for which I need to whip up a quick plug-in to deal with
>>>>>> IDL.
>>>>>>
>>>>>> Are the specs built frequently because I see that you've changed the
>>>>>> directory structure of the SVN repository and so many of your references
>>>>>> like:
>>>>>>
>>>>>> ../../etc/project.xml
>>>>>>
>>>>>> Won't work anymore unless I'm not seeing something.
>>>>>>
>>>>>> If I can get the specs building with Maven 2.x and get the artifacts
>>>>>> produced into the m1 repository, and get the spec builds running under
>>>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
>>>>>> it as the default build? I figure that the specs don't change that often
>>>>>> and is a good place to start if folks are interesting in converting the
>>>>>> build over to Maven 2.x.
>>>>>>
>>>>>> This basically boils down to adhering to this:
>>>>>>
>>>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
>>>>>>
>>>>>> And getting a few tips about the corba module (Alan :-)). Everything
>>>>>> else appears to be working.
>>>>>>
>>>>>> --
>>>>>> jvz.
>>>>>>
>>>>>> Jason van Zyl
>>>>>> jason at maven.org
>>>>>> http://maven.apache.org
>>>>>>
>>>>>> you are never dedicated to something you have complete confidence in.
>>>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
>>>>>> They know it is going to rise tomorrow. When people are fanatically
>>>>>> dedicated to political or religious faiths or any other kind of
>>>>>> dogmas or goals, it's always because these dogmas or
>>>>>> goals are in doubt.
>>>>>>
>>>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>>>>>>
>>>>>>
Re: Building specs with Maven 2.x
Posted by Aaron Mulder <am...@alumni.princeton.edu>.
On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> Aaron,
>
> I had the same issue...
>
> As a work around...go into your geronimo directory and issue this (all
> on one line):
>
> svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
>
> Then you should be able to build it all.
Well, I did that, and when I tried to build that specs tree with Maven
2 I got the big Maven stack trace above. But I'll check it on IRC
and/or later. Bad timing on my part, I guess. :)
Aaron
> Aaron Mulder wrote:
> > So I tried a rebuild-all.
> >
> > Geronimo won't build because the specs aren't there.
> >
> > The specs won't build because of the error below (is that saying
> > Geronimo isn't there?). I assume I'm supposed to use maven2 on
> > geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
> > :)
> >
> > Thanks,
> > Aaron
> >
> > [INFO] Scanning for projects...
> > [INFO] ----------------------------------------------------------------------------
> > [ERROR] FATAL ERROR
> > [INFO] ----------------------------------------------------------------------------
> > [INFO] Failed to resolve artifact.
> >
> > GroupId: org.apache.geronimo
> > ArtifactId: geronimo
> > Version: 1.0-SNAPSHOT
> >
> > Reason: Unable to download the artifact from any repository
> > org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >
> > from the specified remote repositories:
> > central (http://repo1.maven.org/maven2)
> >
> >
> > [INFO] ----------------------------------------------------------------------------
> > [INFO] Trace
> > org.apache.maven.reactor.MavenExecutionException: POM
> > 'org.apache.geronimo:geronimo' not found in repository: Unable to
> > download the artifact from any repository
> > org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >
> > from the specified remote repositories:
> > central (http://repo1.maven.org/maven2)
> >
> > at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
> > at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
> > at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
> > at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> > at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> > at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> > at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> > at java.lang.reflect.Method.invoke(Method.java:324)
> > at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
> > at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> > at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
> > at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> > Caused by: org.apache.maven.project.ProjectBuildingException: POM
> > 'org.apache.geronimo:geronimo' not found in repository: Unable to
> > download the artifact from any repository
> > org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >
> > from the specified remote repositories:
> > central (http://repo1.maven.org/maven2)
> >
> > at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
> > at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
> > at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
> > at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
> > at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
> > at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
> > at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
> > at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
> > ... 11 more
> > Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
> > Unable to download the artifact from any repository
> > org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
> >
> > from the specified remote repositories:
> > central (http://repo1.maven.org/maven2)
> >
> > at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
> > at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
> > at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
> > ... 18 more
> > Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
> > Unable to download the artifact from any repository
> > at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
> > at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
> > ... 20 more
> > [INFO] ----------------------------------------------------------------------------
> > [INFO] Total time: < 1 second
> > [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
> > [INFO] Final Memory: 1M/2M
> > [INFO] ----------------------------------------------------------------------------
> >
> > On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> >> This is just the <sourceDirectory> and <testSourceDirectory> parameters
> >> in the <build> section of the pom, so we do not need to move anything in
> >> the interim, just add those declarations to point at our locations.
> >>
> >> Jeff
> >>
> >> Aaron Mulder wrote:
> >>> Jason,
> >>>
> >>> I guess this is really a Maven question, but... If I read that page
> >>> right it says that what's now
> >>>
> >>> geronimo/module-name/src/java
> >>> geronimo/module-name/src/test
> >>>
> >>> Would need to change (for Maven 2) to
> >>>
> >>> geronimo/module-name/src/main/java
> >>> geronimo/module-name/src/test/java
> >>>
> >>> Is that correct? Is that easy to override so the former layout works
> >>> for all the modules in one shot?
> >>>
> >>> Thanks,
> >>> Aaron
> >>>
> >>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
> >>>> Hi,
> >>>>
> >>>> I've got all the specs builds working with Maven 2.x except for the
> >>>> corba module for which I need to whip up a quick plug-in to deal with
> >>>> IDL.
> >>>>
> >>>> Are the specs built frequently because I see that you've changed the
> >>>> directory structure of the SVN repository and so many of your references
> >>>> like:
> >>>>
> >>>> ../../etc/project.xml
> >>>>
> >>>> Won't work anymore unless I'm not seeing something.
> >>>>
> >>>> If I can get the specs building with Maven 2.x and get the artifacts
> >>>> produced into the m1 repository, and get the spec builds running under
> >>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
> >>>> it as the default build? I figure that the specs don't change that often
> >>>> and is a good place to start if folks are interesting in converting the
> >>>> build over to Maven 2.x.
> >>>>
> >>>> This basically boils down to adhering to this:
> >>>>
> >>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
> >>>>
> >>>> And getting a few tips about the corba module (Alan :-)). Everything
> >>>> else appears to be working.
> >>>>
> >>>> --
> >>>> jvz.
> >>>>
> >>>> Jason van Zyl
> >>>> jason at maven.org
> >>>> http://maven.apache.org
> >>>>
> >>>> you are never dedicated to something you have complete confidence in.
> >>>> No one is fanatically shouting that the sun is going to rise tomorrow.
> >>>> They know it is going to rise tomorrow. When people are fanatically
> >>>> dedicated to political or religious faiths or any other kind of
> >>>> dogmas or goals, it's always because these dogmas or
> >>>> goals are in doubt.
> >>>>
> >>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
> >>>>
> >>>>
>
Re: Building specs with Maven 2.x
Posted by Jeff Genender <jg...@savoirtech.com>.
Aaron,
I had the same issue...
As a work around...go into your geronimo directory and issue this (all
on one line):
svn checkout https://svn.apache.org/repos/asf/geronimo/specs/trunk/ specs
Then you should be able to build it all.
Jeff
Aaron Mulder wrote:
> So I tried a rebuild-all.
>
> Geronimo won't build because the specs aren't there.
>
> The specs won't build because of the error below (is that saying
> Geronimo isn't there?). I assume I'm supposed to use maven2 on
> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
> :)
>
> Thanks,
> Aaron
>
> [INFO] Scanning for projects...
> [INFO] ----------------------------------------------------------------------------
> [ERROR] FATAL ERROR
> [INFO] ----------------------------------------------------------------------------
> [INFO] Failed to resolve artifact.
>
> GroupId: org.apache.geronimo
> ArtifactId: geronimo
> Version: 1.0-SNAPSHOT
>
> Reason: Unable to download the artifact from any repository
> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>
> from the specified remote repositories:
> central (http://repo1.maven.org/maven2)
>
>
> [INFO] ----------------------------------------------------------------------------
> [INFO] Trace
> org.apache.maven.reactor.MavenExecutionException: POM
> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> download the artifact from any repository
> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>
> from the specified remote repositories:
> central (http://repo1.maven.org/maven2)
>
> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> at java.lang.reflect.Method.invoke(Method.java:324)
> at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> Caused by: org.apache.maven.project.ProjectBuildingException: POM
> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> download the artifact from any repository
> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>
> from the specified remote repositories:
> central (http://repo1.maven.org/maven2)
>
> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
> at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
> at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
> at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
> at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
> at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
> at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
> ... 11 more
> Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
> Unable to download the artifact from any repository
> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>
> from the specified remote repositories:
> central (http://repo1.maven.org/maven2)
>
> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
> at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
> ... 18 more
> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
> Unable to download the artifact from any repository
> at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
> at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
> ... 20 more
> [INFO] ----------------------------------------------------------------------------
> [INFO] Total time: < 1 second
> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
> [INFO] Final Memory: 1M/2M
> [INFO] ----------------------------------------------------------------------------
>
> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>> This is just the <sourceDirectory> and <testSourceDirectory> parameters
>> in the <build> section of the pom, so we do not need to move anything in
>> the interim, just add those declarations to point at our locations.
>>
>> Jeff
>>
>> Aaron Mulder wrote:
>>> Jason,
>>>
>>> I guess this is really a Maven question, but... If I read that page
>>> right it says that what's now
>>>
>>> geronimo/module-name/src/java
>>> geronimo/module-name/src/test
>>>
>>> Would need to change (for Maven 2) to
>>>
>>> geronimo/module-name/src/main/java
>>> geronimo/module-name/src/test/java
>>>
>>> Is that correct? Is that easy to override so the former layout works
>>> for all the modules in one shot?
>>>
>>> Thanks,
>>> Aaron
>>>
>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
>>>> Hi,
>>>>
>>>> I've got all the specs builds working with Maven 2.x except for the
>>>> corba module for which I need to whip up a quick plug-in to deal with
>>>> IDL.
>>>>
>>>> Are the specs built frequently because I see that you've changed the
>>>> directory structure of the SVN repository and so many of your references
>>>> like:
>>>>
>>>> ../../etc/project.xml
>>>>
>>>> Won't work anymore unless I'm not seeing something.
>>>>
>>>> If I can get the specs building with Maven 2.x and get the artifacts
>>>> produced into the m1 repository, and get the spec builds running under
>>>> Continuum can I flip the spec builds over to Maven 2.x standards and use
>>>> it as the default build? I figure that the specs don't change that often
>>>> and is a good place to start if folks are interesting in converting the
>>>> build over to Maven 2.x.
>>>>
>>>> This basically boils down to adhering to this:
>>>>
>>>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
>>>>
>>>> And getting a few tips about the corba module (Alan :-)). Everything
>>>> else appears to be working.
>>>>
>>>> --
>>>> jvz.
>>>>
>>>> Jason van Zyl
>>>> jason at maven.org
>>>> http://maven.apache.org
>>>>
>>>> you are never dedicated to something you have complete confidence in.
>>>> No one is fanatically shouting that the sun is going to rise tomorrow.
>>>> They know it is going to rise tomorrow. When people are fanatically
>>>> dedicated to political or religious faiths or any other kind of
>>>> dogmas or goals, it's always because these dogmas or
>>>> goals are in doubt.
>>>>
>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>>>>
>>>>
Re: Building specs with Maven 2.x
Posted by Dain Sundstrom <da...@iq80.com>.
Aaron,
Alan and Jason are working on the specs build right now. I think it
will be fixed pretty soon, but if you are interested in the progress
pop onto irc.
-dain
On Oct 29, 2005, at 11:13 AM, Aaron Mulder wrote:
> So I tried a rebuild-all.
>
> Geronimo won't build because the specs aren't there.
>
> The specs won't build because of the error below (is that saying
> Geronimo isn't there?). I assume I'm supposed to use maven2 on
> geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
> :)
>
> Thanks,
> Aaron
>
> [INFO] Scanning for projects...
> [INFO]
> ----------------------------------------------------------------------
> ------
> [ERROR] FATAL ERROR
> [INFO]
> ----------------------------------------------------------------------
> ------
> [INFO] Failed to resolve artifact.
>
> GroupId: org.apache.geronimo
> ArtifactId: geronimo
> Version: 1.0-SNAPSHOT
>
> Reason: Unable to download the artifact from any repository
> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>
> from the specified remote repositories:
> central (http://repo1.maven.org/maven2)
>
>
> [INFO]
> ----------------------------------------------------------------------
> ------
> [INFO] Trace
> org.apache.maven.reactor.MavenExecutionException: POM
> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> download the artifact from any repository
> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>
> from the specified remote repositories:
> central (http://repo1.maven.org/maven2)
>
> at org.apache.maven.DefaultMaven.getProjects
> (DefaultMaven.java:359)
> at org.apache.maven.DefaultMaven.doExecute
> (DefaultMaven.java:276)
> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:
> 113)
> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at sun.reflect.NativeMethodAccessorImpl.invoke
> (NativeMethodAccessorImpl.java:39)
> at sun.reflect.DelegatingMethodAccessorImpl.invoke
> (DelegatingMethodAccessorImpl.java:25)
> at java.lang.reflect.Method.invoke(Method.java:324)
> at org.codehaus.classworlds.Launcher.launchEnhanced
> (Launcher.java:315)
> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> at org.codehaus.classworlds.Launcher.mainWithExitCode
> (Launcher.java:430)
> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> Caused by: org.apache.maven.project.ProjectBuildingException: POM
> 'org.apache.geronimo:geronimo' not found in repository: Unable to
> download the artifact from any repository
> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>
> from the specified remote repositories:
> central (http://repo1.maven.org/maven2)
>
> at
> org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepos
> itory(DefaultMavenProjectBuilder.java:423)
> at
> org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage
> (DefaultMavenProjectBuilder.java:955)
> at org.apache.maven.project.DefaultMavenProjectBuilder.build
> (DefaultMavenProjectBuilder.java:586)
> at
> org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFil
> e(DefaultMavenProjectBuilder.java:298)
> at org.apache.maven.project.DefaultMavenProjectBuilder.build
> (DefaultMavenProjectBuilder.java:276)
> at org.apache.maven.DefaultMaven.getProject
> (DefaultMaven.java:509)
> at org.apache.maven.DefaultMaven.collectProjects
> (DefaultMaven.java:441)
> at org.apache.maven.DefaultMaven.getProjects
> (DefaultMaven.java:345)
> ... 11 more
> Caused by:
> org.apache.maven.artifact.resolver.ArtifactNotFoundException:
> Unable to download the artifact from any repository
> org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
>
> from the specified remote repositories:
> central (http://repo1.maven.org/maven2)
>
> at
> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve
> (DefaultArtifactResolver.java:136)
> at
> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve
> (DefaultArtifactResolver.java:63)
> at
> org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepos
> itory(DefaultMavenProjectBuilder.java:380)
> ... 18 more
> Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
> Unable to download the artifact from any repository
> at
> org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact
> (DefaultWagonManager.java:260)
> at
> org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve
> (DefaultArtifactResolver.java:124)
> ... 20 more
> [INFO]
> ----------------------------------------------------------------------
> ------
> [INFO] Total time: < 1 second
> [INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
> [INFO] Final Memory: 1M/2M
> [INFO]
> ----------------------------------------------------------------------
> ------
>
> On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
>
>> This is just the <sourceDirectory> and <testSourceDirectory>
>> parameters
>> in the <build> section of the pom, so we do not need to move
>> anything in
>> the interim, just add those declarations to point at our locations.
>>
>> Jeff
>>
>> Aaron Mulder wrote:
>>
>>> Jason,
>>>
>>> I guess this is really a Maven question, but... If I read that page
>>> right it says that what's now
>>>
>>> geronimo/module-name/src/java
>>> geronimo/module-name/src/test
>>>
>>> Would need to change (for Maven 2) to
>>>
>>> geronimo/module-name/src/main/java
>>> geronimo/module-name/src/test/java
>>>
>>> Is that correct? Is that easy to override so the former layout
>>> works
>>> for all the modules in one shot?
>>>
>>> Thanks,
>>> Aaron
>>>
>>> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
>>>
>>>> Hi,
>>>>
>>>> I've got all the specs builds working with Maven 2.x except for the
>>>> corba module for which I need to whip up a quick plug-in to deal
>>>> with
>>>> IDL.
>>>>
>>>> Are the specs built frequently because I see that you've changed
>>>> the
>>>> directory structure of the SVN repository and so many of your
>>>> references
>>>> like:
>>>>
>>>> ../../etc/project.xml
>>>>
>>>> Won't work anymore unless I'm not seeing something.
>>>>
>>>> If I can get the specs building with Maven 2.x and get the
>>>> artifacts
>>>> produced into the m1 repository, and get the spec builds running
>>>> under
>>>> Continuum can I flip the spec builds over to Maven 2.x standards
>>>> and use
>>>> it as the default build? I figure that the specs don't change
>>>> that often
>>>> and is a good place to start if folks are interesting in
>>>> converting the
>>>> build over to Maven 2.x.
>>>>
>>>> This basically boils down to adhering to this:
>>>>
>>>> http://maven.apache.org/guides/introduction/introduction-to-the-
>>>> standard-directory-layout.html
>>>>
>>>> And getting a few tips about the corba module (Alan :-)).
>>>> Everything
>>>> else appears to be working.
>>>>
>>>> --
>>>> jvz.
>>>>
>>>> Jason van Zyl
>>>> jason at maven.org
>>>> http://maven.apache.org
>>>>
>>>> you are never dedicated to something you have complete
>>>> confidence in.
>>>> No one is fanatically shouting that the sun is going to rise
>>>> tomorrow.
>>>> They know it is going to rise tomorrow. When people are fanatically
>>>> dedicated to political or religious faiths or any other kind of
>>>> dogmas or goals, it's always because these dogmas or
>>>> goals are in doubt.
>>>>
>>>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>>>>
>>>>
>>>>
>>
>
Re: Building specs with Maven 2.x
Posted by Aaron Mulder <am...@alumni.princeton.edu>.
So I tried a rebuild-all.
Geronimo won't build because the specs aren't there.
The specs won't build because of the error below (is that saying
Geronimo isn't there?). I assume I'm supposed to use maven2 on
geronimo/specs/trunk now because Maven 1.1 didn't seem to do anything.
:)
Thanks,
Aaron
[INFO] Scanning for projects...
[INFO] ----------------------------------------------------------------------------
[ERROR] FATAL ERROR
[INFO] ----------------------------------------------------------------------------
[INFO] Failed to resolve artifact.
GroupId: org.apache.geronimo
ArtifactId: geronimo
Version: 1.0-SNAPSHOT
Reason: Unable to download the artifact from any repository
org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
from the specified remote repositories:
central (http://repo1.maven.org/maven2)
[INFO] ----------------------------------------------------------------------------
[INFO] Trace
org.apache.maven.reactor.MavenExecutionException: POM
'org.apache.geronimo:geronimo' not found in repository: Unable to
download the artifact from any repository
org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
from the specified remote repositories:
central (http://repo1.maven.org/maven2)
at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:359)
at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:276)
at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
Caused by: org.apache.maven.project.ProjectBuildingException: POM
'org.apache.geronimo:geronimo' not found in repository: Unable to
download the artifact from any repository
org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
from the specified remote repositories:
central (http://repo1.maven.org/maven2)
at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:423)
at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:955)
at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:586)
at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFile(DefaultMavenProjectBuilder.java:298)
at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:276)
at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:509)
at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:441)
at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:345)
... 11 more
Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
Unable to download the artifact from any repository
org.apache.geronimo:geronimo:1.0-SNAPSHOT:pom
from the specified remote repositories:
central (http://repo1.maven.org/maven2)
at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:136)
at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:63)
at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:380)
... 18 more
Caused by: org.apache.maven.wagon.ResourceDoesNotExistException:
Unable to download the artifact from any repository
at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:260)
at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:124)
... 20 more
[INFO] ----------------------------------------------------------------------------
[INFO] Total time: < 1 second
[INFO] Finished at: Sat Oct 29 14:08:38 EDT 2005
[INFO] Final Memory: 1M/2M
[INFO] ----------------------------------------------------------------------------
On 10/29/05, Jeff Genender <jg...@savoirtech.com> wrote:
> This is just the <sourceDirectory> and <testSourceDirectory> parameters
> in the <build> section of the pom, so we do not need to move anything in
> the interim, just add those declarations to point at our locations.
>
> Jeff
>
> Aaron Mulder wrote:
> > Jason,
> >
> > I guess this is really a Maven question, but... If I read that page
> > right it says that what's now
> >
> > geronimo/module-name/src/java
> > geronimo/module-name/src/test
> >
> > Would need to change (for Maven 2) to
> >
> > geronimo/module-name/src/main/java
> > geronimo/module-name/src/test/java
> >
> > Is that correct? Is that easy to override so the former layout works
> > for all the modules in one shot?
> >
> > Thanks,
> > Aaron
> >
> > On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
> >> Hi,
> >>
> >> I've got all the specs builds working with Maven 2.x except for the
> >> corba module for which I need to whip up a quick plug-in to deal with
> >> IDL.
> >>
> >> Are the specs built frequently because I see that you've changed the
> >> directory structure of the SVN repository and so many of your references
> >> like:
> >>
> >> ../../etc/project.xml
> >>
> >> Won't work anymore unless I'm not seeing something.
> >>
> >> If I can get the specs building with Maven 2.x and get the artifacts
> >> produced into the m1 repository, and get the spec builds running under
> >> Continuum can I flip the spec builds over to Maven 2.x standards and use
> >> it as the default build? I figure that the specs don't change that often
> >> and is a good place to start if folks are interesting in converting the
> >> build over to Maven 2.x.
> >>
> >> This basically boils down to adhering to this:
> >>
> >> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
> >>
> >> And getting a few tips about the corba module (Alan :-)). Everything
> >> else appears to be working.
> >>
> >> --
> >> jvz.
> >>
> >> Jason van Zyl
> >> jason at maven.org
> >> http://maven.apache.org
> >>
> >> you are never dedicated to something you have complete confidence in.
> >> No one is fanatically shouting that the sun is going to rise tomorrow.
> >> They know it is going to rise tomorrow. When people are fanatically
> >> dedicated to political or religious faiths or any other kind of
> >> dogmas or goals, it's always because these dogmas or
> >> goals are in doubt.
> >>
> >> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
> >>
> >>
>
Re: Building specs with Maven 2.x
Posted by Jeff Genender <jg...@savoirtech.com>.
This is just the <sourceDirectory> and <testSourceDirectory> parameters
in the <build> section of the pom, so we do not need to move anything in
the interim, just add those declarations to point at our locations.
Jeff
Aaron Mulder wrote:
> Jason,
>
> I guess this is really a Maven question, but... If I read that page
> right it says that what's now
>
> geronimo/module-name/src/java
> geronimo/module-name/src/test
>
> Would need to change (for Maven 2) to
>
> geronimo/module-name/src/main/java
> geronimo/module-name/src/test/java
>
> Is that correct? Is that easy to override so the former layout works
> for all the modules in one shot?
>
> Thanks,
> Aaron
>
> On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
>> Hi,
>>
>> I've got all the specs builds working with Maven 2.x except for the
>> corba module for which I need to whip up a quick plug-in to deal with
>> IDL.
>>
>> Are the specs built frequently because I see that you've changed the
>> directory structure of the SVN repository and so many of your references
>> like:
>>
>> ../../etc/project.xml
>>
>> Won't work anymore unless I'm not seeing something.
>>
>> If I can get the specs building with Maven 2.x and get the artifacts
>> produced into the m1 repository, and get the spec builds running under
>> Continuum can I flip the spec builds over to Maven 2.x standards and use
>> it as the default build? I figure that the specs don't change that often
>> and is a good place to start if folks are interesting in converting the
>> build over to Maven 2.x.
>>
>> This basically boils down to adhering to this:
>>
>> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
>>
>> And getting a few tips about the corba module (Alan :-)). Everything
>> else appears to be working.
>>
>> --
>> jvz.
>>
>> Jason van Zyl
>> jason at maven.org
>> http://maven.apache.org
>>
>> you are never dedicated to something you have complete confidence in.
>> No one is fanatically shouting that the sun is going to rise tomorrow.
>> They know it is going to rise tomorrow. When people are fanatically
>> dedicated to political or religious faiths or any other kind of
>> dogmas or goals, it's always because these dogmas or
>> goals are in doubt.
>>
>> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>>
>>
Re: Building specs with Maven 2.x
Posted by Aaron Mulder <am...@alumni.princeton.edu>.
Jason,
I guess this is really a Maven question, but... If I read that page
right it says that what's now
geronimo/module-name/src/java
geronimo/module-name/src/test
Would need to change (for Maven 2) to
geronimo/module-name/src/main/java
geronimo/module-name/src/test/java
Is that correct? Is that easy to override so the former layout works
for all the modules in one shot?
Thanks,
Aaron
On 10/29/05, Jason van Zyl <ja...@maven.org> wrote:
> Hi,
>
> I've got all the specs builds working with Maven 2.x except for the
> corba module for which I need to whip up a quick plug-in to deal with
> IDL.
>
> Are the specs built frequently because I see that you've changed the
> directory structure of the SVN repository and so many of your references
> like:
>
> ../../etc/project.xml
>
> Won't work anymore unless I'm not seeing something.
>
> If I can get the specs building with Maven 2.x and get the artifacts
> produced into the m1 repository, and get the spec builds running under
> Continuum can I flip the spec builds over to Maven 2.x standards and use
> it as the default build? I figure that the specs don't change that often
> and is a good place to start if folks are interesting in converting the
> build over to Maven 2.x.
>
> This basically boils down to adhering to this:
>
> http://maven.apache.org/guides/introduction/introduction-to-the-standard-directory-layout.html
>
> And getting a few tips about the corba module (Alan :-)). Everything
> else appears to be working.
>
> --
> jvz.
>
> Jason van Zyl
> jason at maven.org
> http://maven.apache.org
>
> you are never dedicated to something you have complete confidence in.
> No one is fanatically shouting that the sun is going to rise tomorrow.
> They know it is going to rise tomorrow. When people are fanatically
> dedicated to political or religious faiths or any other kind of
> dogmas or goals, it's always because these dogmas or
> goals are in doubt.
>
> -- Robert Pirzig, Zen and the Art of Motorcycle Maintenance
>
>